aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2015-10-21Bluetooth: bpa10x: fix BT_HCIUART dependencyArnd Bergmann1-2/+1
The change to bpa10x to use the h4_recv_buf helper added a dependency on BT_HCIUART. This was incorrectly added to Kconfig by adding a 'select' statement, which now in turn causes build failures when CONFIG_TTY is not set: warning: (BT_HCIBPA10X) selects BT_HCIUART which has unmet direct dependencies (NET && BT && TTY) vers/built-in.o: In function `hci_uart_tty_receive': fpga-mgr.c:(.text+0x282824): undefined reference to `tty_unthrottle' drivers/built-in.o: In function `hci_uart_tty_ioctl': fpga-mgr.c:(.text+0x282aa0): undefined reference to `n_tty_ioctl_helper' drivers/built-in.o: In function `hci_uart_flush': This replaces the 'select BT_HCIUART' dependency with 'depends on', which does not have this kind of problem. Alternatively, one could add 'depends on TTY', but avoiding 'select' on user-visible options is generally the preferred choice as that does not introduce the potential for dependency loops or incomplete dependency chains. Fixes: 91489919247a ("Bluetooth: bpa10x: Fix missing BT_HCIUART dependency") Fixes: 943cc592195e ("Bluetooth: bpa10x: Use h4_recv_buf helper for frame reassembly") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-21Bluetooth: btusb: Print information of Intel SfP lock statesMarcel Holtmann1-0/+9
The lock states from Intel SfP controllers can only be read once before loading the firmware. So for debugging purposes, print them out. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21Bluetooth: Don't use remote address type to decide IRK persistencyJohan Hedberg3-33/+20
There are LE devices on the market that start off by announcing their public address and then once paired switch to using private address. To be interoperable with such devices we should simply trust the fact that we're receiving an IRK from them to indicate that they may use private addresses in the future. Instead, simply tie the persistency to the bonding/no-bonding information the same way as for LTKs and CSRKs. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-21Bluetooth: Queue diagnostic messages together with HCI packetsMarcel Holtmann1-4/+5
Sending diagnostic messages directly to the monitor socket might cause issues for devices processing their messages in interrupt context. So instead of trying to directly forward them, queue them up with the other HCI packets and lets them be processed by the sockets at the same time. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21Bluetooth: Restrict valid packet types via HCI_CHANNEL_RAWMarcel Holtmann1-0/+11
When using the HCI_CHANNEL_RAW, restrict the packet types to valid ones from the Bluetooth specification. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21Bluetooth: Remove quirk for HCI_VENDOR_PKT filter handlingMarcel Holtmann1-4/+1
The HCI_VENDOR_PKT quirk was needed for BPA-100/105 devices that send these messages. Now that there is support for proper diagnostic channel this quirk is no longer needed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21Bluetooth: btintel: Add support for enabling tracing functionalityMarcel Holtmann4-0/+40
For Intel controllers with firmware that allows tracing of baseband functionality this allows enabling it via set_diag driver callback. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21Bluetooth: btusb: Add support for Broadcom LM_DIAG interfaceMarcel Holtmann1-4/+224
The Broadcom Bluetooth USB devices have a third interface that is dedicated for LM_DIAG messages. The If#= 2 describes this interface and it consists of one bulk in and one bulk endpoint. T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 38 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=19ff ProdID=0239 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) For all Broadcom based devices with this interface, the driver now claims it and schedules URBs for it. This allows to capture the LM_DIAG messages and allows forwarding them via hci_recv_diag into the diagnostic channel of the Bluetooth subsystem. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21Bluetooth: bpa10x: Fix missing BT_HCIUART dependencyMarcel Holtmann1-0/+1
Selecting just BT_HCIUART_H4 is not enough and it also needs to select BT_HCIUART to avoid this warning: warning: (BT_HCIBPA10X) selects BT_HCIUART_H4 which has unmet direct dependencies (NET && BT && BT_HCIUART) Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller510-2206/+4030
Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds83-345/+668
Pull networking fixes from David Miller: 1) Account for extra headroom in ath9k driver, from Felix Fietkau. 2) Fix OOPS in pppoe driver due to incorrect socket state transition, from Guillaume Nault. 3) Kill memory leak in amd-xgbe debugfx, from Geliang Tang. 4) Power management fixes for iwlwifi, from Johannes Berg. 5) Fix races in reqsk_queue_unlink(), from Eric Dumazet. 6) Fix dst_entry usage in ARP replies, from Jiri Benc. 7) Cure OOPSes with SO_GET_FILTER, from Daniel Borkmann. 8) Missing allocation failure check in amd-xgbe, from Tom Lendacky. 9) Various resource allocation/freeing cures in DSA< from Neil Armstrong. 10) A series of bug fixes in the openvswitch conntrack support, from Joe Stringer. 11) Fix two cases (BPF and act_mirred) where we have to clean the sender cpu stored in the SKB before transmitting. From WANG Cong and Alexei Starovoitov. 12) Disable VLAN filtering in promiscuous mode in mlx5 driver, from Achiad Shochat. 13) Older bnx2x chips cannot do 4-tuple UDP hashing, so prevent this configuration via ethtool. From Yuval Mintz. 14) Don't call rt6_uncached_list_flush_dev() from rt6_ifdown() when 'dev' is NULL, from Eric Biederman. 15) Prevent stalled link synchronization in tipc, from Jon Paul Maloy. 16) kcalloc() gstrings ethtool buffer before having driver fill it in, in order to prevent kernel memory leaking. From Joe Perches. 17) Fix mixxing rt6_info initialization for blackhole routes, from Martin KaFai Lau. 18) Kill VLAN regression in via-rhine, from Andrej Ota. 19) Missing pfmemalloc check in sk_add_backlog(), from Eric Dumazet. 20) Fix spurious MSG_TRUNC signalling in netlink dumps, from Ronen Arad. 21) Scrube SKBs when pushing them between namespaces in openvswitch, from Joe Stringer. 22) bcmgenet enables link interrupts too early, fix from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (92 commits) net: bcmgenet: Fix early link interrupt enabling tunnels: Don't require remote endpoint or ID during creation. openvswitch: Scrub skb between namespaces xen-netback: correctly check failed allocation net: asix: add support for the Billionton GUSB2AM-1G-B USB adapter netlink: Trim skb to alloc size to avoid MSG_TRUNC net: add pfmemalloc check in sk_add_backlog() via-rhine: fix VLAN receive handling regression. ipv6: Initialize rt6_info properly in ip6_blackhole_route() ipv6: Move common init code for rt6_info to a new function rt6_info_init() Bluetooth: Fix initializing conn_params in scan phase Bluetooth: Fix conn_params list update in hci_connect_le_scan_cleanup Bluetooth: Fix remove_device behavior for explicit connects Bluetooth: Fix LE reconnection logic Bluetooth: Fix reference counting for LE-scan based connections Bluetooth: Fix double scan updates mlxsw: core: Fix race condition in __mlxsw_emad_transmit tipc: move fragment importance field to new header position ethtool: Use kcalloc instead of kmalloc for ethtool_get_strings tipc: eliminate risk of stalled link synchronization ...
2015-10-18net: bcmgenet: Fix early link interrupt enablingFlorian Fainelli1-9/+23
Link interrupts are enabled in init_umac(), which is too early for us to process them since we do not yet have a valid PHY device pointer. On BCM7425 chips for instance, we will crash calling phy_mac_interrupt() because phydev is NULL. Fix this by moving the link interrupts enabling in bcmgenet_netif_start(), under a specific function: bcmgenet_link_intr_enable() and while at it, update the comments surrounding the code. Fixes: 6cc8e6d4dcb36 ("net: bcmgenet: Delay PHY initialization to bcmgenet_open()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18Merge tag 'wireless-drivers-for-davem-2015-10-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-driversDavid S. Miller12-20/+54
Kalle Valo says: ==================== iwlwifi: * mvm: flush fw_dump_wk when mvm fails to start * mvm: init card correctly on ctkill exit check * pci: add a few more PCI subvendor IDs for the 7265 series * fix firmware filename for 3160 * mvm: clear csa countdown when AP is stopped * mvm: fix D3 firmware PN programming * dvm: fix D3 firmware PN programming * mvm: fix D3 CCMP TX PN assignment rtlwifi: * rtl8821ae: Fix system lockups on boot ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller46-444/+348
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree. Most relevantly, updates for the nfnetlink_log to integrate with conntrack, fixes for cttimeout and improvements for nf_queue core, they are: 1) Remove useless ifdef around static inline function in IPVS, from Eric W. Biederman. 2) Simplify the conntrack support for nfnetlink_queue: Merge nfnetlink_queue_ct.c file into nfnetlink_queue_core.c, then rename it back to nfnetlink_queue.c 3) Use y2038 safe timestamp from nfnetlink_queue. 4) Get rid of dead function definition in nf_conntrack, from Flavio Leitner. 5) Attach conntrack support for nfnetlink_log.c, from Ken-ichirou MATSUZAWA. This adds a new NETFILTER_NETLINK_GLUE_CT Kconfig switch that controls enabling both nfqueue and nflog integration with conntrack. The userspace application can request this via NFULNL_CFG_F_CONNTRACK configuration flag. 6) Remove unused netns variables in IPVS, from Eric W. Biederman and Simon Horman. 7) Don't put back the refcount on the cttimeout object from xt_CT on success. 8) Fix crash on cttimeout policy object removal. We have to flush out the cttimeout extension area of the conntrack not to refer to an unexisting object that was just removed. 9) Make sure rcu_callback completion before removing nfnetlink_cttimeout module removal. 10) Fix compilation warning in br_netfilter when no nf_defrag_ipv4 and nf_defrag_ipv6 are enabled. Patch from Arnd Bergmann. 11) Autoload ctnetlink dependencies when NFULNL_CFG_F_CONNTRACK is requested. Again from Ken-ichirou MATSUZAWA. 12) Don't use pointer to previous hook when reinjecting traffic via nf_queue with NF_REPEAT verdict since it may be already gone. This also avoids a deadloop if the userspace application keeps returning NF_REPEAT. 13) A bunch of cleanups for netfilter IPv4 and IPv6 code from Ian Morris. 14) Consolidate logger instance existence check in nfulnl_recv_config(). 15) Fix broken atomicity when applying configuration updates to logger instances in nfnetlink_log. 16) Get rid of the .owner attribute in our hook object. We don't need this anymore since we're dropping pending packets that have escaped from the kernel when unremoving the hook. Patch from Florian Westphal. 17) Remove unnecessary rcu_read_lock() from nf_reinject code, we always assume RCU read side lock from .call_rcu in nfnetlink. Also from Florian. 18) Use static inline function instead of macros to define NF_HOOK() and NF_HOOK_COND() when no netfilter support in on, from Arnd Bergmann. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18RDS: fix rds-ping deadlock over TCP transportsantosh.shilimkar@oracle.com1-3/+2
Sowmini found hang with rds-ping while testing RDS over TCP. Its a corner case and doesn't happen always. The issue is not reproducible with IB transport. Its clear from below dump why we see it with RDS TCP. [<ffffffff8153b7e5>] do_tcp_setsockopt+0xb5/0x740 [<ffffffff8153bec4>] tcp_setsockopt+0x24/0x30 [<ffffffff814d57d4>] sock_common_setsockopt+0x14/0x20 [<ffffffffa096071d>] rds_tcp_xmit_prepare+0x5d/0x70 [rds_tcp] [<ffffffffa093b5f7>] rds_send_xmit+0xd7/0x740 [rds] [<ffffffffa093bda2>] rds_send_pong+0x142/0x180 [rds] [<ffffffffa0939d34>] rds_recv_incoming+0x274/0x330 [rds] [<ffffffff810815ae>] ? ttwu_queue+0x11e/0x130 [<ffffffff814dcacd>] ? skb_copy_bits+0x6d/0x2c0 [<ffffffffa0960350>] rds_tcp_data_recv+0x2f0/0x3d0 [rds_tcp] [<ffffffff8153d836>] tcp_read_sock+0x96/0x1c0 [<ffffffffa0960060>] ? rds_tcp_recv_init+0x40/0x40 [rds_tcp] [<ffffffff814d6a90>] ? sock_def_write_space+0xa0/0xa0 [<ffffffffa09604d1>] rds_tcp_data_ready+0xa1/0xf0 [rds_tcp] [<ffffffff81545249>] tcp_data_queue+0x379/0x5b0 [<ffffffffa0960cdb>] ? rds_tcp_write_space+0xbb/0x110 [rds_tcp] [<ffffffff81547fd2>] tcp_rcv_established+0x2e2/0x6e0 [<ffffffff81552602>] tcp_v4_do_rcv+0x122/0x220 [<ffffffff81553627>] tcp_v4_rcv+0x867/0x880 [<ffffffff8152e0b3>] ip_local_deliver_finish+0xa3/0x220 This happens because rds_send_xmit() chain wants to take sock_lock which is already taken by tcp_v4_rcv() on its way to rds_tcp_data_ready(). Commit db6526dcb51b ("RDS: use rds_send_xmit() state instead of RDS_LL_SEND_FULL") which was trying to opportunistically finish the send request in same thread context. But because of above recursive lock hang with RDS TCP, the send work from rds_send_pong() needs to deferred to worker to avoid lock up. Given RDS ping is more of connectivity test than performance critical path, its should be ok even for transport like IB. Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18tunnels: Don't require remote endpoint or ID during creation.Jesse Gross2-10/+9
Before lightweight tunnels existed, it really didn't make sense to create a tunnel that was not fully specified, such as without a destination IP address - the resulting packets would go nowhere. However, with lightweight tunnels, the opposite is true - it doesn't make sense to require this information when it will be provided later on by the route. This loosens the requirements for this information. An alternative would be to allow the relaxed version only when COLLECT_METADATA is enabled. However, since there are several variations on this theme (such as NBMA tunnels in GRE), just dropping the restrictions seems the most consistent across tunnels and with the existing configuration. CC: John Linville <linville@tuxdriver.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18uapi: add mpls_iptunnel.hstephen hemminger1-0/+1
Add missing rule to export mpls iptunnel header needed by iproute2 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18tcp: do not set queue_mapping on SYNACKEric Dumazet6-9/+4
At the time of commit fff326990789 ("tcp: reflect SYN queue_mapping into SYNACK packets") we had little ways to cope with SYN floods. We no longer need to reflect incoming skb queue mappings, and instead can pick a TX queue based on cpu cooking the SYNACK, with normal XPS affinities. Note that all SYNACK retransmits were picking TX queue 0, this no longer is a win given that SYNACK rtx are now distributed on all cpus. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18openvswitch: Scrub skb between namespacesJoe Stringer1-0/+9
If OVS receives a packet from another namespace, then the packet should be scrubbed. However, people have already begun to rely on the behaviour that skb->mark is preserved across namespaces, so retain this one field. This is mainly to address information leakage between namespaces when using OVS internal ports, but by placing it in ovs_vport_receive() it is more generally applicable, meaning it should not be overlooked if other port types are allowed to be moved into namespaces in future. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller4-42/+99
Johan Hedberg says: ==================== pull request: bluetooth 2015-10-16 First of all, sorry for the late set of patches for the 4.3 cycle. We just finished an intensive week of testing at the Bluetooth UnPlugFest and discovered (and fixed) issues there. Unfortunately a few issues affect 4.3-rc5 in a way that they break existing Bluetooth LE mouse and keyboard support. The regressions result from supporting LE privacy in conjunction with scanning for Resolvable Private Addresses before connecting. A feature that has been tested heavily (including automated unit tests), but sadly some regressions slipped in. The UnPlugFest with its multitude of test platforms is a good battle testing ground for uncovering every corner case. The patches in this pull request focus only on fixing the regressions in 4.3-rc5. The patches look a bit larger since we also added comments in the critical sections of the fixes to improve clarity. I would appreciate if we can get these regression fixes to Linus quickly. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hix5hd2_gmac: avoid integer overload warningArnd Bergmann1-1/+1
BITS_RX_EN is an 'unsigned long' constant, so the ones complement of that has bits set that do not fit into a 32-bit variable on 64-bit architectures, which causes a harmless gcc warning: drivers/net/ethernet/hisilicon/hix5hd2_gmac.c: In function 'hix5hd2_port_disable': drivers/net/ethernet/hisilicon/hix5hd2_gmac.c:374:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] writel_relaxed(~(BITS_RX_EN | BITS_TX_EN), priv->base + PORT_EN); This adds a cast to (u32) to tell gcc that the code is indeed fine. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hisilicon: add OF dependencyArnd Bergmann1-1/+1
The HNS MDIO driver fails to build on older ARM machines that are not yet converted to CONFIG_OF: drivers/net/ethernet/hisilicon/hns_mdio.c: In function 'hns_mdio_bus_name': drivers/net/ethernet/hisilicon/hns_mdio.c:405:14: error: 'OF_BAD_ADDR' undeclared (first use in this function) u64 taddr = OF_BAD_ADDR; ^ drivers/net/ethernet/hisilicon/hns_mdio.c:405:14: note: each undeclared identifier is reported only once for each function it appears in drivers/net/ethernet/hisilicon/hns_mdio.c:409:11: error: implicit declaration of function 'of_translate_address' [-Werror=implicit-function-declaration] taddr = of_translate_address(np, addr); ^ This clarifies the dependency to ensure we don't attempt to build these drivers without CONFIG_OF, but also adds a COMPILE_TEST alternative to give us better build coverage testing. Build-tested on x86 as well to ensure this actually works. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hisilicon: include linux/vmalloc.h in dsafArnd Bergmann1-0/+2
Some configurations fail to build the hns dsaf code because of a missing header file: ethernet/hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_init': ethernet/hisilicon/hns/hns_dsaf_main.c:1096:2: error: implicit declaration of function 'vzalloc' [-Werror=implicit-function-declaration] priv->soft_mac_tbl = vzalloc(sizeof(*priv->soft_mac_tbl) This adds the correct #include. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18Merge branch 'hns-fixes'David S. Miller2-34/+18
yankejian says: ==================== net: hns: fixes two bugs in hns driver This patchset fixes two bugs in hns driver. - fixes timeout when received pause frame from the connective ports - should be set by using ethtool -s when the devices are link down ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hns: fixes a bug about timeout by pause framelisheng1-7/+6
this patch fixes the bug triggered timeout sequence. when the connective ports cannot accept the packets with higher speed, they will send out the pause frame to the Soc's mac. At that time, the driver resets the relevant of the Soc, then it causes the packets cannot be sent out immediately. this patch fixes the issue. Signed-off-by: yankejian <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: lisheng <lisheng011@huawei.com> Signed-off-by: lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hns: fixes the issue by using ethtool -sChenny Xu1-27/+12
before this patch, hns driver only permits user to set the net device by using ethtool -s when the device is link up. it is obviously not so good. it needs to be set no matter it is link up or down. so this patch fixes this issue. Signed-off-by: yankejian <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: lisheng <lisheng011@huawei.com> Signed-off-by: lipeng <lipeng321@huawei.com> Signed-off-by: Chenny Xu <chenny.xu@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18Merge branch 'hsi-fixes'David S. Miller2-48/+1
huangdaode says: ==================== net: hisilicon fix some bugs in HNS drivers This patchset fixes the two bugs in HNS driver, one is remove the hnae sysfs interface according to the review comments from Arnd Bergmann <arnd@arndb.de>, another is fixing the wrong mac_id judgement bug which is found during internal tests. change log: v3: remove the hnae sysfs interface. v2: 1) remove first bug fix, which is fixed in another patch submitted by Arnd Bergmann <arnd@arndb.de> 2) change the code sytyle according to Joe. v1: initial version. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hisilicon fix a bug on Hisilicon Network Subsystemhuangdaode1-1/+1
This patch fixes the wrong judgement of mac_id when get port num. Signed-off-by: huangdaode <huangdaode@hisilicon.com> Signed-off-by: yankejian <yankejian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hisilicon rm hnae sysfs interfacehuangdaode1-47/+0
This patch removes the hns driver hnae sysfs interface according to Arnd's review comments. Signed-off-by: huangdaode <huangdaode@hisilicon.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18xen-netback: correctly check failed allocationInsu Yun1-0/+6
Since vzalloc can be failed in memory pressure, writes -ENOMEM to xenstore to indicate error. Signed-off-by: Insu Yun <wuninsu@gmail.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: asix: add support for the Billionton GUSB2AM-1G-B USB adapterChia-Sheng Chang2-0/+5
Just another AX88178-based 10/100/1000 USB-to-Ethernet dongle. This one shows up in lsusb as: "ID 08dd:0114 Billionton Systems, Inc". Signed-off-by: Chia-Sheng Chang <changchias@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Christoph Jaeger <cj@linux.com> Cc: "Woojung.Huh@microchip.com" <Woojung.Huh@microchip.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Markus Elfring <elfring@users.sourceforge.net> Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: netdev@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: phy: bcm-phy-lib: Fix module license issueArun Parameswaran1-0/+5
The 'bcm-phy-lib.c', added as a part of the commit "net: phy: Add Broadcom phy library for common interfaces" was missing the module license. This was causing an issue when the library is built as a module; "module license 'unspecified' taints kernel". This patch fixes the issue by adding the module license, author and description to the bcm-phy-lib.c file. Fixes: a1cba5613edf5 ("net: phy: Add Broadcom phy library for common interfaces") Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18netlink: Trim skb to alloc size to avoid MSG_TRUNCArad, Ronen1-12/+22
netlink_dump() allocates skb based on the calculated min_dump_alloc or a per socket max_recvmsg_len. min_alloc_size is maximum space required for any single netdev attributes as calculated by rtnl_calcit(). max_recvmsg_len tracks the user provided buffer to netlink_recvmsg. It is capped at 16KiB. The intention is to avoid small allocations and to minimize the number of calls required to obtain dump information for all net devices. netlink_dump packs as many small messages as could fit within an skb that was sized for the largest single netdev information. The actual space available within an skb is larger than what is requested. It could be much larger and up to near 2x with align to next power of 2 approach. Allowing netlink_dump to use all the space available within the allocated skb increases the buffer size a user has to provide to avoid truncaion (i.e. MSG_TRUNG flag set). It was observed that with many VLANs configured on at least one netdev, a larger buffer of near 64KiB was necessary to avoid "Message truncated" error in "ip link" or "bridge [-c[ompressvlans]] vlan show" when min_alloc_size was only little over 32KiB. This patch trims skb to allocated size in order to allow the user to avoid truncation with more reasonable buffer size. Signed-off-by: Ronen Arad <ronen.arad@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18ipconfig: send Client-identifier in DHCP requestsLi RongQing2-1/+34
A dhcp server may provide parameters to a client from a pool of IP addresses and using a shared rootfs, or provide a specific set of parameters for a specific client, usually using the MAC address to identify each client individually. The dhcp protocol also specifies a client-id field which can be used to determine the correct parameters to supply when no MAC address is available. There is currently no way to tell the kernel to supply a specific client-id, only the userspace dhcp clients support this feature, but this can not be used when the network is needed before userspace is available such as when the root filesystem is on NFS. This patch is to be able to do something like "ip=dhcp,client_id_type, client_id_value", as a kernel parameter to enable the kernel to identify itself to the server. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18Linux 4.3-rc6Linus Torvalds1-1/+1
2015-10-18Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds5-18/+51
Pull i2c fixes from Wolfram Sang: "Here are some bugfixes for the I2C subsystem. Kieran found a flaw in the recently renewed wake irq handling. Mika handled a user bug report where the ACPI info turned out to be unusable. I updated MAINTAINERS so that such bug reports will sooner get to the right people. Geert pointed me to a problem of some i2c drivers regarding PM which I fixed" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348 MAINTAINERS: add maintainers for Synopsis Designware I2C drivers i2c: designware-platdrv: enable RuntimePM before registering to the core i2c: s3c2410: enable RuntimePM before registering to the core i2c: rcar: enable RuntimePM before registering to the core i2c: return probe deferred status on dev_pm_domain_attach
2015-10-18i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348Mika Westerberg1-0/+20
ACPI SSCN/FMCN methods were originally added because then the platform can provide the most accurate HCNT/LCNT values to the driver. However, this seems not to be true for Dell Inspiron 7348 where using these causes the touchpad to fail in boot: i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: controller timed out The values received from ACPI are (in fast mode): HCNT: 72 LCNT: 160 this translates to following timings (input clock is 100MHz on Broadwell): tHIGH: 720 ns (spec min 600 ns) tLOW: 1600 ns (spec min 1300 ns) Bus period: 2920 ns (assuming 300 ns tf and tr) Bus speed: 342.5 kHz Both tHIGH and tLOW are within the I2C specification. The calculated values when ACPI parameters are not used are (in fast mode): HCNT: 87 LCNT: 159 which translates to: tHIGH: 870 ns (spec min 600 ns) tLOW: 1590 ns (spec min 1300 ns) Bus period 3060 ns (assuming 300 ns tf and tr) Bus speed 326.8 kHz These values are also within the I2C specification. Since both ACPI and calculated values meet the I2C specification timing requirements it is hard to say why the touchpad does not function properly with the ACPI values except that the bus speed is higher in this case (but still well below the max 400kHz). Solve this by adding DMI quirk to the driver that disables using ACPI parameters on this particulare machine. Reported-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2015-10-17Merge branches 'irq-urgent-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds3-6/+6
Pull irq/timer fixes from Thomas Gleixner: "irq: a fix for the new hierarchical MSI interrupt handling which unbreaks PCI=n configurations. timers: a fix for the new hrtimer clock offset update mechanism to ensure that the boot time offset is respected" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi: Do not use pci_msi_[un]mask_irq as default methods * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Increment clock_was_set_seq in timekeeping_init()
2015-10-17Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextPablo Neira Ayuso620-7263/+23787
This merge resolves conflicts with 75aec9df3a78 ("bridge: Remove br_nf_push_frag_xmit_sk") as part of Eric Biederman's effort to improve netns support in the network stack that reached upstream via David's net-next tree. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Conflicts: net/bridge/br_netfilter_hooks.c
2015-10-17net: add pfmemalloc check in sk_add_backlog()Eric Dumazet1-0/+8
Greg reported crashes hitting the following check in __sk_backlog_rcv() BUG_ON(!sock_flag(sk, SOCK_MEMALLOC)); The pfmemalloc bit is currently checked in sk_filter(). This works correctly for TCP, because sk_filter() is ran in tcp_v[46]_rcv() before hitting the prequeue or backlog checks. For UDP or other protocols, this does not work, because the sk_filter() is ran from sock_queue_rcv_skb(), which might be called _after_ backlog queuing if socket is owned by user by the time packet is processed by softirq handler. Fixes: b4b9e35585089 ("netvm: set PF_MEMALLOC as appropriate during SKB processing") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Greg Thelen <gthelen@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds2-9/+9
Pull input fixes from Dmitry Torokhov: "Just two small fixups to ads7846 touchscreen controller driver and Cypress touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cyapa - fix the copy paste error on electrodes_rx value Input: ads7846 - correct the value got from SPI
2015-10-16Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds1-1/+3
Pull clk fix from Stephen Boyd: "Just one revert for Armada XP devices: the conversion to of_clk_get_parent_name() wasn't a direct translation, so we revert back to of_clk_get() + __clk_get_name(). We could make of_clk_get_parent_name() more robust, but that may have unintended side-effects, so we'll do that in the next version" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Partially revert "clk: mvebu: Convert to clk_hw based provider APIs"
2015-10-16Merge tag 'dm-4.3-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds2-4/+13
Pull device mapper fixes from Mike Snitzer: "Two DM target error path cleanup fixes (one for stable in DM thinp and one for a v4.3-rc5 thinko in DM snapshot)" * tag 'dm-4.3-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin: fix missing pool reference count decrement in pool_ctr error path dm snapshot persistent: fix missing cleanup in persistent_ctr error path
2015-10-16Merge branch 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds3-5/+16
Pull btrfs fixes from Chris Mason: "I have two more bug fixes for btrfs. My commit fixes a bug we hit last week at FB, a combination of lots of hard links and an admin command to resolve inode numbers. Dave is adding checks to make sure balance on current kernels ignores filters it doesn't understand. The penalty for being wrong is just doing more work (not crashing etc), but it's a good fix" * 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix use after free iterating extrefs btrfs: check unsupported filters in balance arguments
2015-10-16Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds2-6/+17
Pull Ceph fixes from Sage Weil: "Just two small items from Ilya: The first patch fixes the RBD readahead to grab full objects. The second fixes the write ops to prevent undue promotion when a cache tier is configured on the server side" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: use writefull op for object size writes rbd: set max_sectors explicitly
2015-10-16Merge tag 'pm+acpi-4.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds7-49/+21
Pull power management and ACPI fixes from Rafael Wysocki: "These fix two recent regressions (ACPICA, the generic power domains framework) and one crash that may happen on specific hardware supported since 4.1 (intel_pstate). Specifics: - Fix a regression introduced by a recent ACPICA cleanup that uncovered a latent bug (Lv Zheng). - Fix a recent regression in the generic power domains framework that may cause it to violate PM QoS latency constraints in some cases (Ulf Hansson). - Fix an intel_pstate driver crash on the Knights Landing chips that do not update the MPERF counter as often as expected by the driver which may result in a divide by 0 (Srinivas Pandruvada)" * tag 'pm+acpi-4.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Fix divide by zero on Knights Landing (KNL) ACPICA: Tables: Fix FADT dependency regression PM / Domains: Fix validation of latency constraints in genpd governor
2015-10-16Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds12-16/+115
Pull drm fixes from Dave Airlie: "Nothing too crazy or exciting: - two MAINTAINERS entries that I didn't see the point in delaying. - one drm mst fix to stop sending uninitialised data to monitors - two amdgpu fixes - one radeon mst tiling fix - one vmwgfx regression fix - one virtio warning fix. I have found one locking problem that needs a bit of reorg to fix, but I'm not sure it's worth putting in -fixes as I don't think we've seen it hit in the real world ever, I just found it using the virtio-gpu driver when working on it. I'll possibly send it next week once I've time to discuss with Daniel" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/virtio: use %llu format string form atomic64_t MAINTAINERS: Add myself as maintainer for the gma500 driver MAINTAINERS: add a maintainer for the atmel-hlcdc DRM driver drm/amdgpu: Keep the pflip interrupts always enabled v7 drm/amdgpu: adjust default dispclk (v2) drm/dp/mst: make mst i2c transfer code more robust. drm/radeon: attach tile property to mst connector drm/vmwgfx: Fix kernel NULL pointer dereference on older hardware
2015-10-16Merge tag 'powerpc-4.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds14-30/+79
Pull powerpc fixes from Michael Ellerman: - Re-enable CONFIG_SCSI_DH in our defconfigs - Remove unused os_area_db_id_video_mode - cxl: fix leak of IRQ names in cxl_free_afu_irqs() from Andrew - cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API from Andrew - cxl: fix leak of ctx->mapping when releasing kernel API contexts from Andrew - cxl: Workaround malformed pcie packets on some cards from Philippe - cxl: Fix number of allocated pages in SPA from Christophe Lombard - Fix checkstop in native_hpte_clear() with lockdep from Cyril - Panic on unhandled Machine Check on powernv from Daniel - selftests/powerpc: Fix build failure of load_unaligned_zeropad test * tag 'powerpc-4.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix build failure of load_unaligned_zeropad test powerpc/powernv: Panic on unhandled Machine Check powerpc: Fix checkstop in native_hpte_clear() with lockdep cxl: Fix number of allocated pages in SPA cxl: Workaround malformed pcie packets on some cards cxl: fix leak of ctx->mapping when releasing kernel API contexts cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API cxl: fix leak of IRQ names in cxl_free_afu_irqs() powerpc/ps3: Remove unused os_area_db_id_video_mode powerpc/configs: Re-enable CONFIG_SCSI_DH
2015-10-16Merge branch 'akpm' (patches from Andrew)Linus Torvalds12-61/+58
Merge misc fixes from Andrew Morton: "6 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: sh: add copy_user_page() alias for __copy_user() lib/Kconfig: ZLIB_DEFLATE must select BITREVERSE mm, dax: fix DAX deadlocks memcg: convert threshold to bytes builddeb: remove debian/files before build mm, fs: obey gfp_mapping for add_to_page_cache()
2015-10-16sh: add copy_user_page() alias for __copy_user()Ross Zwisler1-0/+1
copy_user_page() is needed by DAX. Without this we get a compile error for DAX on SH: fs/dax.c:280:2: error: implicit declaration of function `copy_user_page' [-Werror=implicit-function-declaration] copy_user_page(vto, (void __force *)vfrom, vaddr, to); ^ This was done with a random config that happened to include DAX support. This patch has only been compile tested. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.