| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In case of a non-blocking SMC socket, the initial CLC handshake is
performed over a blocking TCP connection in a worker. If the SMC socket
is released, smc_release has to wait for the blocking CLC socket
operations (e.g., kernel_connect) inside the worker.
This patch aborts a CLC connection when the respective non-blocking SMC
socket is released to avoid waiting on socket operations or timeouts.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Kalle Valo says:
====================
wireless-drivers fixes for 4.20
First set of fixes for 4.20, this time we have quite a few them but
all very small.
ath9k
* fix a locking regression found by a static checker
wlcore
* fix a crash which was a regression with wakeirq handling
brcm80211
* yet another fix for 160 MHz channel handling
mt76
* fix a longstaning build problem when CONFIG_LEDS_CLASS is disabled
* don't use uninitialised mutex
iwlwifi
* do note that the iwlwifi merge tag (commit 4ec321c14693) seems to
contain wrong list of changes so ignore that
* fix ACPI data handling, a memory leak and other smaller fixes
ath10k
* fix a crash during suspend which was a recent regression
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jean-Louis reported a TCP regression and bisected to recent SACK
compression.
After a loss episode (receiver not able to keep up and dropping
packets because its backlog is full), linux TCP stack is sending
a single SACK (DUPACK).
Sender waits a full RTO timer before recovering losses.
While RFC 6675 says in section 5, "Algorithm Details",
(2) If DupAcks < DupThresh but IsLost (HighACK + 1) returns true --
indicating at least three segments have arrived above the current
cumulative acknowledgment point, which is taken to indicate loss
-- go to step (4).
...
(4) Invoke fast retransmit and enter loss recovery as follows:
there are old TCP stacks not implementing this strategy, and
still counting the dupacks before starting fast retransmit.
While these stacks probably perform poorly when receivers implement
LRO/GRO, we should be a little more gentle to them.
This patch makes sure we do not enable SACK compression unless
3 dupacks have been sent since last rcv_nxt update.
Ideally we should even rearm the timer to send one or two
more DUPACK if no more packets are coming, but that will
be work aiming for linux-4.21.
Many thanks to Jean-Louis for bisecting the issue, providing
packet captures and testing this patch.
Fixes: 5d9f4262b7ea ("tcp: add SACK compression")
Reported-by: Jean-Louis Dupond <jean-louis@dupond.be>
Tested-by: Jean-Louis Dupond <jean-louis@dupond.be>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a packet is trapped and the corresponding SKB marked as
already-forwarded, it retains this marking even after it is forwarded
across veth links into another bridge. There, since it ingresses the
bridge over veth, which doesn't have offload_fwd_mark, it triggers a
warning in nbp_switchdev_frame_mark().
Then nbp_switchdev_allowed_egress() decides not to allow egress from
this bridge through another veth, because the SKB is already marked, and
the mark (of 0) of course matches. Thus the packet is incorrectly
blocked.
Solve by resetting offload_fwd_mark() in skb_scrub_packet(). That
function is called from tunnels and also from veth, and thus catches the
cases where traffic is forwarded between bridges and transformed in a
way that invalidates the marking.
Fixes: 6bc506b4fb06 ("bridge: switchdev: Add forward mark support for stacked devices")
Fixes: abf4bb6b63d0 ("skbuff: Add the offload_mr_fwd_mark field")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Suggested-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull RISC-V fixes from Palmer Dabbelt:
"This week is a bit bigger than I expected. That's my fault, as I
missed a few patches while I was at Plumbers last week. We have:
- A fix to a quite embarassing issue where raw_copy_to_user() was
implemented with asm_copy_from_user() (and vice versa).
- Improvements to our makefile to allow flat binaries to be
generated.
- A build fix that predeclares "struct module" at the top of
<asm/module.h>, which triggers warnings later in that header.
- The addition of our own <uapi/asm/unistd> header, which is
necessary to align our stat ABI on 32-bit systems.
- A fix to avoid printing a warning when the S or U bits are set in
print_isa().
I already have one patch in the queue for next week"
* tag 'riscv-for-linus-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
RISC-V: recognize S/U mode bits in print_isa
riscv: add asm/unistd.h UAPI header
riscv: fix warning in arch/riscv/include/asm/module.h
RISC-V: Build flat and compressed kernel images
RISC-V: Fix raw_copy_{to,from}_user()
|
|
When we read the EOF page of the file via readpages, we need
to zero the region beyond EOF that we either do not read or
should not contain data so that mmap does not expose stale data to
user applications.
However, iomap_adjust_read_range() fails to detect EOF correctly,
and so fsx on 1k block size filesystems fails very quickly with
mapreads exposing data beyond EOF. There are two problems here.
Firstly, when calculating the end block of the EOF byte, we have
to round the size by one to avoid a block aligned EOF from reporting
a block too large. i.e. a size of 1024 bytes is 1 block, which in
index terms is block 0. Therefore we have to calculate the end block
from (isize - 1), not isize.
The second bug is determining if the current page spans EOF, and so
whether we need split it into two half, one for the IO, and the
other for zeroing. Unfortunately, the code that checks whether
we should split the block doesn't actually check if we span EOF, it
just checks if the read spans the /offset in the page/ that EOF
sits on. So it splits every read into two if EOF is not page
aligned, regardless of whether we are reading the EOF block or not.
Hence we need to restrict the "does the read span EOF" check to
just the page that spans EOF, not every page we read.
This patch results in correct EOF detection through readpages:
xfs_vm_readpages: dev 259:0 ino 0x43 nr_pages 24
xfs_iomap_found: dev 259:0 ino 0x43 size 0x66c00 offset 0x4f000 count 98304 type hole startoff 0x13c startblock 1368 blockcount 0x4
iomap_readpage_actor: orig pos 323584 pos 323584, length 4096, poff 0 plen 4096, isize 420864
xfs_iomap_found: dev 259:0 ino 0x43 size 0x66c00 offset 0x50000 count 94208 type hole startoff 0x140 startblock 1497 blockcount 0x5c
iomap_readpage_actor: orig pos 327680 pos 327680, length 94208, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 331776 pos 331776, length 90112, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 335872 pos 335872, length 86016, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 339968 pos 339968, length 81920, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 344064 pos 344064, length 77824, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 348160 pos 348160, length 73728, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 352256 pos 352256, length 69632, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 356352 pos 356352, length 65536, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 360448 pos 360448, length 61440, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 364544 pos 364544, length 57344, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 368640 pos 368640, length 53248, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 372736 pos 372736, length 49152, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 376832 pos 376832, length 45056, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 380928 pos 380928, length 40960, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 385024 pos 385024, length 36864, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 389120 pos 389120, length 32768, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 393216 pos 393216, length 28672, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 397312 pos 397312, length 24576, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 401408 pos 401408, length 20480, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 405504 pos 405504, length 16384, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 409600 pos 409600, length 12288, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 413696 pos 413696, length 8192, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 417792 pos 417792, length 4096, poff 0 plen 3072, isize 420864
iomap_readpage_actor: orig pos 420864 pos 420864, length 1024, poff 3072 plen 1024, isize 420864
As you can see, it now does full page reads until the last one which
is split correctly at the block aligned EOF, reading 3072 bytes and
zeroing the last 1024 bytes. The original version of the patch got
this right, but it got another case wrong.
The EOF detection crossing really needs to the the original length
as plen, while it starts at the end of the block, will be shortened
as up-to-date blocks are found on the page. This means "orig_pos +
plen" no longer points to the end of the page, and so will not
correctly detect EOF crossing. Hence we have to use the length
passed in to detect this partial page case:
xfs_filemap_fault: dev 259:1 ino 0x43 write_fault 0
xfs_vm_readpage: dev 259:1 ino 0x43 nr_pages 1
xfs_iomap_found: dev 259:1 ino 0x43 size 0x2cc00 offset 0x2c000 count 4096 type hole startoff 0xb0 startblock 282 blockcount 0x4
iomap_readpage_actor: orig pos 180224 pos 181248, length 4096, poff 1024 plen 2048, isize 183296
xfs_iomap_found: dev 259:1 ino 0x43 size 0x2cc00 offset 0x2cc00 count 1024 type hole startoff 0xb3 startblock 285 blockcount 0x1
iomap_readpage_actor: orig pos 183296 pos 183296, length 1024, poff 3072 plen 1024, isize 183296
Heere we see a trace where the first block on the EOF page is up to
date, hence poff = 1024 bytes. The offset into the page of EOF is
3072, so the range we want to read is 1024 - 3071, and the range we
want to zero is 3072 - 4095. You can see this is split correctly
now.
This fixes the stale data beyond EOF problem that fsx quickly
uncovers on 1k block size filesystems.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
It returns EINVAL when the operation is not supported by the
filesystem. Fix it to return EOPNOTSUPP to be consistent with
the man page and clone_file_range().
Clean up the inconsistent error return handling while I'm there.
(I know, lipstick on a pig, but every little bit helps...)
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
When doing direct IO to a pipe for do_splice_direct(), then pipe is
trivial to fill up and overflow as it can only hold 16 pages. At
this point bio_iov_iter_get_pages() then returns -EFAULT, and we
abort the IO submission process. Unfortunately, iomap_dio_rw()
propagates the error back up the stack.
The error is converted from the EFAULT to EAGAIN in
generic_file_splice_read() to tell the splice layers that the pipe
is full. do_splice_direct() completely fails to handle EAGAIN errors
(it aborts on error) and returns EAGAIN to the caller.
copy_file_write() then completely fails to handle EAGAIN as well,
and so returns EAGAIN to userspace, having failed to copy the data
it was asked to.
Avoid this whole steaming pile of fail by having iomap_dio_rw()
silently swallow EFAULT errors and so do short reads.
To make matters worse, iomap_dio_actor() has a stale data exposure
bug bio_iov_iter_get_pages() fails - it does not zero the tail block
that it may have been left uncovered by partial IO. Fix the error
handling case to drop to the sub-block zeroing rather than
immmediately returning the -EFAULT error.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
If we are doing sub-block dio that extends EOF, we need to zero
the unused tail of the block to initialise the data in it it. If we
do not zero the tail of the block, then an immediate mmap read of
the EOF block will expose stale data beyond EOF to userspace. Found
with fsx running sub-block DIO sizes vs MAPREAD/MAPWRITE operations.
Fix this by detecting if the end of the DIO write is beyond EOF
and zeroing the tail if necessary.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
When we write into an unwritten extent via direct IO, we dirty
metadata on IO completion to convert the unwritten extent to
written. However, when we do the FUA optimisation checks, the inode
may be clean and so we issue a FUA write into the unwritten extent.
This means we then bypass the generic_write_sync() call after
unwritten extent conversion has ben done and we don't force the
modified metadata to stable storage.
This violates O_DSYNC semantics. The window of exposure is a single
IO, as the next DIO write will see the inode has dirty metadata and
hence will not use the FUA optimisation. Calling
generic_write_sync() after completion of the second IO will also
sync the first write and it's metadata.
Fix this by avoiding the FUA optimisation when writing to unwritten
extents.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Long saga. There have been days spent following this through dead end
after dead end in multi-GB event traces. This morning, after writing
a trace-cmd wrapper that enabled me to be more selective about XFS
trace points, I discovered that I could get just enough essential
tracepoints enabled that there was a 50:50 chance the fsx config
would fail at ~115k ops. If it didn't fail at op 115547, I stopped
fsx at op 115548 anyway.
That gave me two traces - one where the problem manifested, and one
where it didn't. After refining the traces to have the necessary
information, I found that in the failing case there was a real
extent in the COW fork compared to an unwritten extent in the
working case.
Walking back through the two traces to the point where the CWO fork
extents actually diverged, I found that the bad case had an extra
unwritten extent in it. This is likely because the bug it led me to
had triggered multiple times in those 115k ops, leaving stray
COW extents around. What I saw was a COW delalloc conversion to an
unwritten extent (as they should always be through
xfs_iomap_write_allocate()) resulted in a /written extent/:
xfs_writepage: dev 259:0 ino 0x83 pgoff 0x17000 size 0x79a00 offset 0 length 0
xfs_iext_remove: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/2 offset 32 block 152 count 20 flag 1 caller xfs_bmap_add_extent_delay_real
xfs_bmap_pre_update: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/1 offset 1 block 4503599627239429 count 31 flag 0 caller xfs_bmap_add_extent_delay_real
xfs_bmap_post_update: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/1 offset 1 block 121 count 51 flag 0 caller xfs_bmap_add_ex
Basically, Cow fork before:
0 1 32 52
+H+DDDDDDDDDDDD+UUUUUUUUUUU+
PREV RIGHT
COW delalloc conversion allocates:
1 32
+uuuuuuuuuuuu+
NEW
And the result according to the xfs_bmap_post_update trace was:
0 1 32 52
+H+wwwwwwwwwwwwwwwwwwwwwwww+
PREV
Which is clearly wrong - it should be a merged unwritten extent,
not an unwritten extent.
That lead me to look at the LEFT_FILLING|RIGHT_FILLING|RIGHT_CONTIG
case in xfs_bmap_add_extent_delay_real(), and sure enough, there's
the bug.
It takes the old delalloc extent (PREV) and adds the length of the
RIGHT extent to it, takes the start block from NEW, removes the
RIGHT extent and then updates PREV with the new extent.
What it fails to do is update PREV.br_state. For delalloc, this is
always XFS_EXT_NORM, while in this case we are converting the
delayed allocation to unwritten, so it needs to be updated to
XFS_EXT_UNWRITTEN. This LF|RF|RC case does not do this, and so
the resultant extent is always written.
And that's the bug I've been chasing for a week - a bmap btree bug,
not a reflink/dedupe/copy_file_range bug, but a BMBT bug introduced
with the recent in core extent tree scalability enhancements.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
On a sub-page block size filesystem, fsx is failing with a data
corruption after a series of operations involving copying a file
with the destination offset beyond EOF of the destination of the file:
8093(157 mod 256): TRUNCATE DOWN from 0x7a120 to 0x50000 ******WWWW
8094(158 mod 256): INSERT 0x25000 thru 0x25fff (0x1000 bytes)
8095(159 mod 256): COPY 0x18000 thru 0x1afff (0x3000 bytes) to 0x2f400
8096(160 mod 256): WRITE 0x5da00 thru 0x651ff (0x7800 bytes) HOLE
8097(161 mod 256): COPY 0x2000 thru 0x5fff (0x4000 bytes) to 0x6fc00
The second copy here is beyond EOF, and it is to sub-page (4k) but
block aligned (1k) offset. The clone runs the EOF zeroing, landing
in a pre-existing post-eof delalloc extent. This zeroes the post-eof
extents in the page cache just fine, dirtying the pages correctly.
The problem is that xfs_reflink_remap_prep() now truncates the page
cache over the range that it is copying it to, and rounds that down
to cover the entire start page. This removes the dirty page over the
delalloc extent from the page cache without having written it back.
Hence later, when the page cache is flushed, the page at offset
0x6f000 has not been written back and hence exposes stale data,
which fsx trips over less than 10 operations later.
Fix this by changing xfs_reflink_remap_prep() to use
xfs_flush_unmap_range().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Pull NVMe fix from Christoph.
* 'nvme-4.20' of git://git.infradead.org/nvme:
nvme-fc: resolve io failures during connect
|
|
Pull cpupower utility updates for 4.20-rc4 from Shuah Khan:
"This cpupower update for Linux 4.20-rc4 consists of compile fixes to allow
use of outside build flags and override of CFLAGS from Jiri Olsa, and fix
to compilation with STATIC=true from Konstantin Khlebnikov."
* tag 'linux-cpupower-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
tools cpupower: Override CFLAGS assignments
tools cpupower debug: Allow to use outside build flags
tools/power/cpupower: fix compilation with STATIC=true
|
|
If we need to force a full plane update before userspace/fbdev
have given us a proper plane state we should try to maintain the
current plane state as much as possible (apart from the parts
of the state we're trying to fix up with the plane update).
To that end add basic readout for the plane rotation and
maintain it during the initial fb takeover.
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 516a49cc1946 ("drm/i915: Fix assert_plane() warning on bootup with external display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120135450.3634-2-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit f43348a3db89305bb1935da9fe4499fdcdde9796)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
If we force a plane update to fix up our half populated plane state
we'll also force on the pipe gamma for the plane (since we always
enable pipe gamma currently). If the BIOS hasn't programmed a sensible
LUT into the hardware this will cause the image to become corrupted.
Typical symptoms are a purple/yellow/etc. flash when the driver loads.
To avoid this let's program something sensible into the LUT when
we do the plane update. In the future I plan to add proper plane
gamma enable readout so this is just a temporary measure.
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 516a49cc1946 ("drm/i915: Fix assert_plane() warning on bootup with external display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120135450.3634-1-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit fa6af5145b4e87a30a530be0d80734a9dd40da77)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Many HP AMD based laptops contain an SMB0001 device like this:
Device (SMBD)
{
Name (_HID, "SMB0001") // _HID: Hardware ID
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
IO (Decode16,
0x0B20, // Range Minimum
0x0B20, // Range Maximum
0x20, // Alignment
0x20, // Length
)
IRQ (Level, ActiveLow, Shared, )
{7}
})
}
The legacy style IRQ resource here causes acpi_dev_get_irqresource() to
be called with legacy=true and this message to show in dmesg:
ACPI: IRQ 7 override to edge, high
This causes issues when later on the AMD0030 GPIO device gets enumerated:
Device (GPIO)
{
Name (_HID, "AMDI0030") // _HID: Hardware ID
Name (_CID, "AMDI0030") // _CID: Compatible ID
Name (_UID, Zero) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, )
{
0x00000007,
}
Memory32Fixed (ReadWrite,
0xFED81500, // Address Base
0x00000400, // Address Length
)
})
Return (RBUF) /* \_SB_.GPIO._CRS.RBUF */
}
}
Now acpi_dev_get_irqresource() gets called with legacy=false, but because
of the earlier override of the trigger-type acpi_register_gsi() returns
-EBUSY (because we try to register the same interrupt with a different
trigger-type) and we end up setting IORESOURCE_DISABLED in the flags.
The setting of IORESOURCE_DISABLED causes platform_get_irq() to call
acpi_irq_get() which is not implemented on x86 and returns -EINVAL.
resulting in the following in dmesg:
amd_gpio AMDI0030:00: Failed to get gpio IRQ: -22
amd_gpio: probe of AMDI0030:00 failed with error -22
The SMB0001 is a "virtual" device in the sense that the only way the OS
interacts with it is through calling a couple of methods to do SMBus
transfers. As such it is weird that it has IO and IRQ resources at all,
because the driver for it is not expected to ever access the hardware
directly.
The Linux driver for the SMB0001 device directly binds to the acpi_device
through the acpi_bus, so we do not need to instantiate a platform_device
for this ACPI device. This commit adds the SMB0001 HID to the
forbidden_id_list, avoiding the instantiating of a platform_device for it.
Not instantiating a platform_device means we will no longer call
acpi_dev_get_irqresource() for the legacy IRQ resource fixing the probe of
the AMDI0030 device failing.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1644013
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198715
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199523
Reported-by: Lukas Kahnert <openproggerfreak@gmail.com>
Tested-by: Marc <suaefar@googlemail.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Writeback connectors do not produce any on-screen output and require
special care for use. Such connectors are hidden from enumeration in
DRM resources by default, but they are still picked-up by fbdev.
This makes rather little sense since fbdev is not really adapted for
dealing with writeback.
Moreover, this is also a source of issues when userspace disables the
CRTC (and associated plane) without detaching the CRTC from the
connector (which is hidden by default). In this case, the connector is
still using the CRTC, leading to am "enabled/connectors mismatch" and
eventually the failure of the associated atomic commit. This situation
happens with VC4 testing under IGT GPU Tools.
Filter out writeback connectors in the fbdev helper to solve this.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
Fixes: 935774cd71fe ("drm: Add writeback connector type")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115163248.21168-1-paul.kocialkowski@bootlin.com
|
|
Under moderate amounts of GPU stress, we can observe on Bearlake and
Pineview (later gen3 models) that we execute the following batch buffer
before the write into the batch is coherent. Adding extra (tested with
upto 32x) MI_FLUSH to either the invalidation, flush or both phases does
not solve the incoherency issue with the relocations, but emitting the
MI_STORE_DWORD_IMM twice does. So be it.
Fixes: 7dd4f6729f92 ("drm/i915: Async GPU relocation processing")
Testcase: igt/gem_tiled_fence_blits # blb/pnv
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181119154153.15327-1-chris@chris-wilson.co.uk
(cherry picked from commit 7fa28e146994da1e8a4124623d7da97b798ea520)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
after 'police' configuration parameters were converted to use RCU instead
of spinlock, the state variables used to compute the traffic rate (namely
'tcfp_toks', 'tcfp_ptoks' and 'tcfp_t_c') are erroneously read/updated in
the traffic path without any protection.
Use a dedicated spinlock to avoid race conditions on these variables, and
ensure proper cache-line alignment. In this way, 'police' is still faster
than what we observed when 'tcf_lock' was used in the traffic path _ i.e.
reverting commit 2d550dbad83c ("net/sched: act_police: don't use spinlock
in the data path"). Moreover, we preserve the throughput improvement that
was obtained after 'police' started using per-cpu counters, when 'avrate'
is used instead of 'rate'.
Changes since v1 (thanks to Eric Dumazet):
- call ktime_get_ns() before acquiring the lock in the traffic path
- use a dedicated spinlock instead of tcf_lock
- improve cache-line usage
Fixes: 2d550dbad83c ("net/sched: act_police: don't use spinlock in the data path")
Reported-and-suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
|
|
Pull MIPS fixes from Paul Burton:
"A few MIPS fixes for 4.20:
- Re-enable the Cavium Octeon USB driver in its defconfig after it
was accidentally removed back in 4.14.
- Have early memblock allocations be performed bottom-up to more
closely match the behaviour we used to have with bootmem, which
seems a safer choice since we've seen fallout from the change made
in the 4.20 merge window.
- Simplify max_low_pfn calculation in the NUMA code for the Loongson3
and SGI IP27 platforms to both clean up the code & ensure
max_low_pfn has been set appropriately before it is used"
* tag 'mips_fixes_4.20_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Loongson3,SGI-IP27: Simplify max_low_pfn calculation
MIPS: Let early memblock_alloc*() allocate memories bottom-up
MIPS: OCTEON: cavium_octeon_defconfig: re-enable OCTEON USB driver
|
|
Meanwhile I know the driver quite well and I refactored bigger parts
of it. As a result people contact me already with r8169 questions.
Therefore I'd volunteer to become co-maintainer of the driver also
officially.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Due to the register name and setting change of HDP
memory light sleep on Vega20,change accordingly in
the driver.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The extent shifting code uses a flush and invalidate mechainsm prior
to shifting extents around. This is similar to what
xfs_free_file_space() does, but it doesn't take into account things
like page cache vs block size differences, and it will fail if there
is a page that it currently busy.
xfs_flush_unmap_range() handles all of these cases, so just convert
xfs_prepare_shift() to us that mechanism rather than having it's own
special sauce.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
The last AG may be very small comapred to all other AGs, and hence
AG reservations based on the superblock AG size may actually consume
more space than the AG actually has. This results on assert failures
like:
XFS: Assertion failed: xfs_perag_resv(pag, XFS_AG_RESV_METADATA)->ar_reserved + xfs_perag_resv(pag, XFS_AG_RESV_RMAPBT)->ar_reserved <= pag->pagf_freeblks + pag->pagf_flcount, file: fs/xfs/libxfs/xfs_ag_resv.c, line: 319
[ 48.932891] xfs_ag_resv_init+0x1bd/0x1d0
[ 48.933853] xfs_fs_reserve_ag_blocks+0x37/0xb0
[ 48.934939] xfs_mountfs+0x5b3/0x920
[ 48.935804] xfs_fs_fill_super+0x462/0x640
[ 48.936784] ? xfs_test_remount_options+0x60/0x60
[ 48.937908] mount_bdev+0x178/0x1b0
[ 48.938751] mount_fs+0x36/0x170
[ 48.939533] vfs_kern_mount.part.43+0x54/0x130
[ 48.940596] do_mount+0x20e/0xcb0
[ 48.941396] ? memdup_user+0x3e/0x70
[ 48.942249] ksys_mount+0xba/0xd0
[ 48.943046] __x64_sys_mount+0x21/0x30
[ 48.943953] do_syscall_64+0x54/0x170
[ 48.944835] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Hence we need to ensure the finobt per-ag space reservations take
into account the size of the last AG rather than treat it like all
the other full size AGs.
Note that both refcountbt and rmapbt already take the size of the AG
into account via reading the AGF length directly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
When retrying a failed inode or dquot buffer,
xfs_buf_resubmit_failed_buffers() clears all the failed flags from
the inde/dquot log items. In doing so, it also drops all the
reference counts on the buffer that the failed log items hold. This
means it can drop all the active references on the buffer and hence
free the buffer before it queues it for write again.
Putting the buffer on the delwri queue takes a reference to the
buffer (so that it hangs around until it has been written and
completed), but this goes bang if the buffer has already been freed.
Hence we need to add the buffer to the delwri queue before we remove
the failed flags from the log items attached to the buffer to ensure
it always remains referenced during the resubmit process.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Useless:
xfs_buf_get_uncached: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_unlock: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_submit: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_hold: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_iowait: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_iodone: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_iowait_done: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_rele: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
Useful:
xfs_buf_get_uncached: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_unlock: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_submit: dev 253:32 bno 0x200b5 nblks 0x1 ...
xfs_buf_hold: dev 253:32 bno 0x200b5 nblks 0x1 ...
xfs_buf_iowait: dev 253:32 bno 0x200b5 nblks 0x1 ...
xfs_buf_iodone: dev 253:32 bno 0x200b5 nblks 0x1 ...
xfs_buf_iowait_done: dev 253:32 bno 0x200b5 nblks 0x1 ...
xfs_buf_rele: dev 253:32 bno 0x200b5 nblks 0x1 ...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
During tcp coalescing ensure that the skb hardware timestamp refers to the
highest sequence number data.
Previously only the software timestamp was updated during coalescing.
Signed-off-by: Stephen Mallon <stephen.mallon@sydney.edu.au>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch has the fix to avoid PHY lockup with 5717/5719/5720 in change
ring and flow control paths. This patch solves the RX hang while doing
continuous ring or flow control parameters with heavy traffic from peer.
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
At the request of the reporter, the Linux kernel security team offers to
postpone the publishing of a fix for up to 5 business days from the date
of a report.
While it is generally undesirable to keep a fix private after it has
been developed, this short window is intended to allow distributions to
package the fix into their kernel builds and permits early inclusion of
the security team in the case of a co-ordinated disclosure with other
parties. Unfortunately, discussions with major Linux distributions and
cloud providers has revealed that 5 business days is not sufficient to
achieve either of these two goals.
As an example, cloud providers need to roll out KVM security fixes to a
global fleet of hosts with sufficient early ramp-up and monitoring. An
end-to-end timeline of less than two weeks dramatically cuts into the
amount of early validation and increases the chance of guest-visible
regressions.
The consequence of this timeline mismatch is that security issues are
commonly fixed without the involvement of the Linux kernel security team
and are instead analysed and addressed by an ad-hoc group of developers
across companies contributing to Linux. In some cases, mainline (and
therefore the official stable kernels) can be left to languish for
extended periods of time. This undermines the Linux kernel security
process and puts upstream developers in a difficult position should they
find themselves involved with an undisclosed security problem that they
are unable to report due to restrictions from their employer.
To accommodate the needs of these users of the Linux kernel and
encourage them to engage with the Linux security team when security
issues are first uncovered, extend the maximum period for which fixes
may be delayed to 7 calendar days, or 14 calendar days in exceptional
cases, where the logistics of QA and large scale rollouts specifically
need to be accommodated. This brings parity with the linux-distros@
maximum embargo period of 14 calendar days.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Amit Shah <aams@amazon.com>
Cc: Laura Abbott <labbott@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sasha has somehow been convinced into helping me with the stable kernel
maintenance. Codify this slip in good judgement before he realizes what
he really signed up for :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull media fixes from Mauro Carvalho Chehab:
- add a missing include at v4l2-controls uAPI header
- minor kAPI update for the request API
- some fixes at CEC core
- use a lower minimum height for the virtual codec driver
- cleanup a gcc warning due to the lack of a fall though markup
- tc358743: Remove unnecessary self assignment
- fix the V4L event subscription logic
- docs: Document metadata format in struct v4l2_format
- omap3isp and ipu3-cio2: fix unbinding logic
* tag 'media/v4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: ipu3-cio2: Use cio2_queues_exit
media: ipu3-cio2: Unregister device nodes first, then release resources
media: omap3isp: Unregister media device as first
media: docs: Document metadata format in struct v4l2_format
media: v4l: event: Add subscription to list before calling "add" operation
media: dm365_ipipeif: better annotate a fall though
media: Rename vb2_m2m_request_queue -> v4l2_m2m_request_queue
media: cec: increase debug level for 'queue full'
media: cec: check for non-OK/NACK conditions while claiming a LA
media: vicodec: lower minimum height to 360
media: tc358743: Remove unnecessary self assignment
media: v4l: fix uapi mpeg slice params definition
v4l2-controls: add a missing include
|
|
There are uniform, non-uniform and flexible erase flash configurations.
The non-uniform erase types, are the erase types that can _not_ erase
the entire flash by their own.
As the code was, in case flashes had flexible erase capabilities
(support both uniform and non-uniform erase types in the same flash
configuration) and supported multiple uniform erase type sizes, the
code did not sort the uniform erase types, and could select a wrong
erase type size.
Sort the uniform erase mask in case of flexible erase flash
configurations, in order to select the best uniform erase type size.
Uniform, non-uniform, and flexible configurations with just a valid
uniform erase type, are not affected by this change.
Uniform erase tested on mx25l3273fm2i-08g and sst26vf064B-104i/sn.
Non uniform erase tested on sst26vf064B-104i/sn.
Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
Removes the warning about an unsupported ISA when reading /proc/cpuinfo
on QEMU. The "S" extension is not being returned as it is not accessible
from userspace.
Signed-off-by: Patrick Stählin <me@packi.ch>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Marcin Juszkiewicz reported issues while generating syscall table for riscv
using 4.20-rc1. The patch refactors our unistd.h files to match some other
architectures.
- Add asm/unistd.h UAPI header, which has __ARCH_WANT_NEW_STAT only for 64-bit
- Remove asm/syscalls.h UAPI header and merge to asm/unistd.h
- Adjust kernel asm/unistd.h
So now asm/unistd.h UAPI header should show all syscalls for riscv.
Before this, Makefile simply put `#include <asm-generic/unistd.h>` into
generated asm/unistd.h UAPI header thus user didn't see:
- __NR_riscv_flush_icache
- __NR_newfstatat
- __NR_fstat
which are supported by riscv kernel.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Fixes: 67314ec7b025 ("RISC-V: Request newstat syscalls")
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Fixes warning: 'struct module' declared inside parameter list will not be
visible outside of this definition or declaration
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
This patch extends Linux RISC-V build system to build and install:
Image - Flat uncompressed kernel image
Image.gz - Flat and GZip compressed kernel image
Quiet a few bootloaders (such as Uboot, UEFI, etc) are capable of
booting flat and compressed kernel images. In case of Uboot, booting
Image or Image.gz is achieved using bootm command.
The flat and uncompressed kernel image (i.e. Image) is very useful
in pre-silicon developent and testing because we can create back-door
HEX files for RAM on FPGAs from Image.
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Sparse highlighted it, and appears to be a pure bug (from vs to).
./arch/riscv/include/asm/uaccess.h:403:35: warning: incorrect type in argument 1 (different address spaces)
./arch/riscv/include/asm/uaccess.h:403:39: warning: incorrect type in argument 2 (different address spaces)
./arch/riscv/include/asm/uaccess.h:409:37: warning: incorrect type in argument 1 (different address spaces)
./arch/riscv/include/asm/uaccess.h:409:41: warning: incorrect type in argument 2 (different address spaces)
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
The cdc-acm kernel module currently does not support the Hiro (Conexant)
H05228 USB modem. The patch below adds the device specific information:
idVendor 0x0572
idProduct 0x1349
Signed-off-by: Maarten Jacobs <maarten256@outlook.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since capturing the error state requires fiddling around with the GGTT
to read arbitrary buffers and is itself run under stop_machine(), it
deadlocks the machine (effectively a hard hang) when run in conjunction
with Broxton's VTd workaround to serialize GGTT access.
v2: Store the ERR_PTR in first_error so that the error can be reported
to the user via sysfs.
v3: Mention the quirk in dmesg (using info as per usual)
Fixes: 0ef34ad6222a ("drm/i915: Serialize GTT/Aperture accesses on BXT")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: John Harrison <john.C.Harrison@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102161232.17742-5-chris@chris-wilson.co.uk
(cherry picked from commit fb6f0b64e455b207a636346588e65bf9598d30eb)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2018-11-19
The following fixes are for mlx5 core and netdev driver.
For -stable v4.16
bc7fda7d4637 ('net/mlx5e: IPoIB, Reset QP after channels are closed')
For -stable v4.17
36917a270395 ('net/mlx5: IPSec, Fix the SA context hash key')
For -stable v4.18
6492a432be3a ('net/mlx5e: Always use the match level enum when parsing TC rule match')
c3f81be236b1 ('net/mlx5e: Removed unnecessary warnings in FEC caps query')
c5ce2e736b64 ('net/mlx5e: Fix selftest for small MTUs')
For -stable v4.19
effcd896b25e ('net/mlx5e: Adjust to max number of channles when re-attaching')
394cbc5acd68 ('net/mlx5e: RX, verify received packet size in Linear Striding RQ')
447cbb3613c8 ('net/mlx5e: Don't match on vlan non-existence if ethertype is wildcarded')
c223c1574612 ('net/mlx5e: Claim TC hw offloads support only under a proper build config')
Please pull and let me know if there's any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch changes to use rtnl_lock only during a reset to avoid
deadlock that could occur when a thread operating close is holding
rtnl_lock and waiting for reset_lock acquired by another thread,
which is waiting for rtnl_lock in order to set the number of tx/rx
queues during a reset.
Also, we now setting the number of tx/rx queues during a soft reset
for failover or LPM events.
Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Denis Bolotin says:
====================
qed: Fix Queue Manager getters
This patch series fixes various queue manager getter functions. It is
important to make sure the getter's caller will receive a valid queue even
in error case to prevent more serious bugs.
Please consider applying to net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The getter callers doesn't know the valid Physical Queues (PQ) values.
This patch makes sure that a valid PQ will always be returned.
The patch consists of 3 fixes:
- When qed_init_qm_get_idx_from_flags() receives a disabled flag, it
returned PQ 0, which can potentially be another function's pq. Verify
that flag is enabled, otherwise return default start_pq.
- When qed_init_qm_get_idx_from_flags() receives an unknown flag, it
returned NULL and could lead to a segmentation fault. Return default
start_pq instead.
- A modulo operation was added to MCOS/VFS PQ getters to make sure the
PQ returned is in range of the required flag.
Fixes: b5a9ee7cf3be ("qed: Revise QM cofiguration")
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the condition which verifies that only one flag is set. The API
bitmap_weight() should receive size in bits instead of bytes.
Fixes: b5a9ee7cf3be ("qed: Revise QM cofiguration")
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If FEC caps query fails when executing 'ethtool <interface>'
the whole callback fails unnecessarily, fixed that by replacing the
error return code with debug logging only.
Fixes: 6cfa94605091 ("net/mlx5e: Ethtool driver callback for query/set FEC policy")
Signed-off-by: Shay Agroskin <shayag@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Querying interface FEC caps with 'ethtool [int]' after link reset
throws warning regading link speed.
This warning is not needed as there is already an indication in
user space that the link is not up.
Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Shay Agroskin <shayag@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
This bug would result in reading wrong FEC capabilities for 10G/40G.
Fixes: 2095b2641477 ("net/mlx5e: Add port FEC get/set functions")
Signed-off-by: Shay Agroskin <shayag@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Some speeds don't support turning FEC policy off. In case a requested
FEC policy is not supported for a speed (including current speed), its new
FEC policy would be:
no FEC - if disabling FEC is supported for that speed
unchanged - else
Fixes: 2095b2641477 ("net/mlx5e: Add port FEC get/set functions")
Signed-off-by: Shay Agroskin <shayag@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Arthur Kiyanovski says:
====================
net: ena: hibernation and rmmod bug fixes
This patchset includes 2 bug fixes:
1. A fix to a crash during resume from hibernation.
2. A fix to an illegal memory access during driver removal (e.g. during rmmod)
which might cause a crash in certain systems.
The subminor number in the driver version is also promoted to indicate driver
was changed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Hans Wippel
David S. Miller
Eric Dumazet
Petr Machata
Linus Torvalds
Dave Chinner
Jens Axboe
Rafael J. Wysocki
Ville Syrjälä
Hans de Goede
Paul Kocialkowski
Chris Wilson
Davide Caratti
Heiner Kallweit
Kenneth Feng
Stephen Mallon
Siva Reddy Kallam
Will Deacon
Greg Kroah-Hartman
Tudor.Ambarus@microchip.com
Patrick Stählin
David Abdurachmanov
Anup Patel
Olof Johansson
Maarten Jacobs
Juliet Kim
Denis Bolotin
Shay Agroskin