aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-12-16net:core: use IS_ENABLEDIgor Maravić2-5/+4
Use IS_ENABLED(CONFIG_FOO) instead of defined(CONFIG_FOO) || defined (CONFIG_FOO_MODULE) Signed-off-by: Igor Maravić <igorm@etf.rs> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16be2net: Add support for Skyhawk cardsAjit Khaparde2-0/+6
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16sch_gred: prefer GFP_KERNEL allocationsEric Dumazet1-7/+11
In control path, its better to use GFP_KERNEL allocations where possible. Before taking qdisc spinlock, we preallocate memory just in case we'll need it in gred_change_vq() This is a followup to commit 3f1e6d3fd37b (sch_gred: should not use GFP_KERNEL while holding a spinlock) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16net: fix compilation with !CONFIG_NETGlauber Costa1-0/+12
Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Glauber Costa <glommer@parallels.com> CC: Hiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com> CC: David S. Miller <davem@davemloft.net> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16net: fix sleeping while atomic problem in sock mem_cgroup.Glauber Costa1-14/+14
We can't scan the proto_list to initialize sock cgroups, as it holds a rwlock, and we also want to keep the code generic enough to avoid calling the initialization functions of protocols directly, Convert proto_list_lock into a mutex, so we can sleep and do the necessary allocations. This lock is seldom taken, so there shouldn't be any performance penalties associated with that Signed-off-by: Glauber Costa <glommer@parallels.com> CC: Hiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com> CC: David S. Miller <davem@davemloft.net> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Stephen Rothwell <sfr@canb.auug.org.au> CC: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16mlx4: Fix compile error when driver is comiled-inJoerg Roedel1-2/+2
This patch fixes a compile error that occurs when the driver is compile into the kernel and not as a module. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-nextDavid S. Miller4-12/+4
2011-12-16batman-adv: Fix merge error.David S. Miller1-1/+1
I didn't resolve the merge properly during the last pull of the net tree into net-next. The code in the final resolution should set flags to TT_CLIENT_ROAM not TT_CLIENT_PENDING. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16sfc: Use skb_fill_page_desc() to simplify passing of page buffers to GROBen Hutchings1-5/+2
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-12-16ethtool: Define and apply a default policy for RX flow hash indirectionBen Hutchings6-20/+47
All drivers that support modification of the RX flow hash indirection table initialise it in the same way: RX rings are assigned to table entries in rotation. Make that default policy explicit by having them call a ethtool_rxfh_indir_default() function. In the ethtool core, add support for a zero size value for ETHTOOL_SRXFHINDIR, which resets the table to this default. Partly-suggested-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16ethtool: Centralise validation of ETHTOOL_{G, S}RXFHINDIR parametersBen Hutchings6-111/+117
Add a new ethtool operation (get_rxfh_indir_size) to get the indirectional table size. Use this to validate the user buffer size before calling get_rxfh_indir or set_rxfh_indir. Use get_rxnfc to get the number of RX rings, and validate the contents of the new indirection table before calling set_rxfh_indir. Remove this validation from drivers. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16ethtool: Clarify use of size field for ETHTOOL_GRXFHINDIRBen Hutchings1-2/+3
In order to find out the device's RX flow hash table size, ethtool initially uses ETHTOOL_GRXFHINDIR with a buffer size of zero. This must be supported, but it is not necessary to support any other user buffer size less than the device table size. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16unix_diag: Write it into kbuildPavel Emelyanov2-0/+10
Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16unix_diag: Receive queue lenght NLAPavel Emelyanov2-0/+15
Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16unix_diag: Pending connections IDs NLAPavel Emelyanov2-0/+41
When establishing a unix connection on stream sockets the server end receives an skb with socket in its receive queue. Report who is waiting for these ends to be accepted for listening sockets via NLA. There's a lokcing issue with this -- the unix sk state lock is required to access the peer, and it is taken under the listening sk's queue lock. Strictly speaking the queue lock should be taken inside the state lock, but since in this case these two sockets are different it shouldn't lead to deadlock. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16unix_diag: Unix peer inode NLAPavel Emelyanov2-0/+26
Report the peer socket inode ID as NLA. With this it's finally possible to find out the other end of an interesting unix connection. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16unix_diag: Unix inode info NLAPavel Emelyanov2-0/+28
Actually, the socket path if it's not anonymous doesn't give a clue to which file the socket is bound to. Even if the path is absolute, it can be unlinked and then new socket can be bound to it. With this NLA it's possible to check which file a particular socket is really bound to. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16unix_diag: Unix socket name NLAPavel Emelyanov2-0/+28
Report the sun_path when requested as NLA. With leading '\0' if present but without the leading AF_UNIX bits. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16unix_diag: Dumping exact socket corePavel Emelyanov1-1/+66
The socket inode is used as a key for lookup. This is effectively the only really unique ID of a unix socket, but using this for search currently has one problem -- it is O(number of sockets) :( Does it worth fixing this lookup or inventing some other ID for unix sockets? Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16unix_diag: Dumping all sockets corePavel Emelyanov1-1/+75
Walk the unix sockets table and fill the core response structure, which includes type, state and inode. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16unix_diag: Basic module skeletonPavel Emelyanov2-0/+81
Includes basic module_init/_exit functionality, dump/get_exact stubs and declares the basic API structures for request and response. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16af_unix: Export stuff required for diag modulePavel Emelyanov2-3/+9
Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16sock_diag: Generalize requests cookies managementsPavel Emelyanov5-21/+27
The sk address is used as a cookie between dump/get_exact calls. It will be required for unix socket sdumping, so move it from inet_diag to sock_diag. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16sock_diag: Fix module netlink aliasesPavel Emelyanov5-9/+10
I've made a mistake when fixing the sock_/inet_diag aliases :( 1. The sock_diag layer should request the family-based alias, not just the IPPROTO_IP one; 2. The inet_diag layer should request for AF_INET+protocol alias, not just the protocol one. Thus fix this. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16sock_diag: Move the SOCK_DIAG_BY_FAMILY cmd declarationPavel Emelyanov2-1/+3
It should belong to sock_diag, not inet_diag. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller16-75/+102
Conflicts: drivers/net/ethernet/freescale/fsl_pq_mdio.c net/batman-adv/translation-table.c net/ipv6/route.c
2011-12-15tg3: Break out RSS indir table init and assignmentMatt Carlson2-23/+37
This patch creates a new device member to hold the RSS indirection table and separates out the code that initializes the table from the code that programs the table into device registers. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-15tg3: Use mii_advertise_flowctrlMatt Carlson1-19/+3
This patch replaces tg3's internal tg3_advert_flowctrl_1000T function with mii_advertise_flowctrl provided by the kernel headers. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-15tg3: Add 57766 ASIC rev supportMatt Carlson2-27/+58
This patch adds support for the 57766 ASIC revision. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-15tg3: Make the TX BD DMA limit configurableMatt Carlson2-8/+9
The 57766 ASIC rev will impose a new TX BD DMA limit on the driver. This patch prepares for 57766 support by making the tx BD DMA limit tunable. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-15tg3: Enable EEE support for capable 10/100 devsMatt Carlson1-10/+9
There are some devices in the 57765 ASIC rev that are EEE capable. Unfortunately the EEE setup code only gets executed if the device is gigabit capable. This patch fixes the problem. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-15tcp_memcontrol: fix reversed if conditionDan Carpenter1-1/+1
We should only dereference the pointer if it's valid, not the other way round. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-15Move limit definitions outside CONFIG_INETGlauber Costa1-1/+1
They need to be available for other protocols as well, since they are used in sock.c openly Signed-off-by: Glauber Costa <glommer@parallels.com> CC: Hiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com> CC: David S. Miller <davem@davemloft.net> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-14inet: remove rcu protection on tw_netEric Dumazet1-10/+2
commit b099ce2602d806 (net: Batch inet_twsk_purge) added rcu protection on tw_net for no obvious reason. struct net are refcounted anyway since timewait sockets escape from rcu protected sections. tw_net stay valid for the whole timwait lifetime. This also removes a lot of sparse errors. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-14net: ping: remove some sparse errorsEric Dumazet1-2/+2
net/ipv4/sysctl_net_ipv4.c:78:6: warning: symbol 'inet_get_ping_group_range_table' was not declared. Should it be static? net/ipv4/sysctl_net_ipv4.c:119:31: warning: incorrect type in argument 2 (different signedness) net/ipv4/sysctl_net_ipv4.c:119:31: expected int *range net/ipv4/sysctl_net_ipv4.c:119:31: got unsigned int *<noident> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-14cls_flow: remove one dynamic arrayEric Dumazet1-1/+1
Its better to use a predefined size for this small automatic variable. Removes a sparse error as well : net/sched/cls_flow.c:288:13: error: bad constant expression Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-14bnx2x: handle vpd data longer than 128 bytesBarak Witkowski1-7/+28
Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-14vlan: static functionsEric Dumazet1-3/+3
commit 6d4cdf47d2 (vlan: add 802.1q netpoll support) forgot to declare as static some private functions. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-14vlan: add rtnl_dereference() annotationsDan Carpenter1-5/+9
The original code generates a Sparse warning: net/8021q/vlan_core.c:336:9: error: incompatible types in comparison expression (different address spaces) It's ok to dereference __rcu pointers here because we are holding the RTNL lock. I've added some calls to rtnl_dereference() to silence the warning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-14rtnetlink: rtnl_link_register() sanity testEric Dumazet1-11/+14
Before adding a struct rtnl_link_ops into link_ops list, check it doesnt clash with a prior one. Based on a previous patch from Alexander Smirnov Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13ipv6: Check dest prefix length on original route not copied one in rt6_alloc_cow().David S. Miller1-1/+1
After commit 8e2ec639173f325977818c45011ee176ef2b11f6 ("ipv6: don't use inetpeer to store metrics for routes.") the test in rt6_alloc_cow() for setting the ANYCAST flag is now wrong. 'rt' will always now have a plen of 128, because it is set explicitly to 128 by ip6_rt_copy. So to restore the semantics of the test, check the destination prefix length of 'ort'. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13ipv6: If neigh lookup fails during icmp6 dst allocation, propagate error.David S. Miller1-2/+4
Don't just succeed with a route that has a NULL neighbour attached. This follows the behavior of addrconf_dst_alloc(). Allowing this kind of route to end up with a NULL neigh attached will result in packet drops on output until the route is somehow invalidated, since nothing will meanwhile try to lookup the neigh again. A statistic is bumped for the case where we see a neigh-less route on output, but the resulting packet drop is otherwise silent in nature, and frankly it's a hard error for this to happen and ipv6 should do what ipv4 does which is say something in the kernel logs. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13net: Remove unused neighbour layer ops.David S. Miller3-12/+0
It's simpler to just keep these things out until there is a real user of them, so we can see what the needs actually are, rather than keep these things around as useless overhead. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13mlx4_en: updated driver version to 2.0Yevgeny Petrilin1-2/+2
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13mlx4_core: updated driver version to 1.1Yevgeny Petrilin1-2/+2
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13mlx4_core: Modify driver initialization flow to accommodate SRIOV for EthernetJack Morgenstein7-157/+934
1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13mlx4_core: adjust catas operation for SRIOV modeJack Morgenstein2-3/+10
When running in SRIOV mode, driver should not automatically start/stop the mlx4_core upon sensing an HCA internal error -- doing this disables/enables sriov, which will cause the hypervisor to hang if there are running VMs with attached VFs. In addition, on VMs the catas process should not run at all, since the HCA error buffer is not available to VMs in the BARs. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13mlx4_core: mtts resources units changed to offsetMarcel Apfelbaum7-99/+92
In the previous implementation mtts are managed by: 1. order - log(mtt segments), 'mtt segment' groups several mtts together. 2. first_seg - segment location relative to mtt table. In the current implementation: 1. order - log(mtts) rather than segments 2. offset - mtt index in mtt table Note: The actual mtt allocation is made in segments but it is transparent to callers. Rational: The mtt resource holders are not interested on how the allocation of mtt is done, but rather on how they will use it. Signed-off-by: Marcel Apfelbaum <marcela@dev.mellanox.co.il> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13mlx4_en: Allow communication between functions on same hostEugenia Emantayev2-11/+24
To enable internal loopback, always fill DMAC in control segment when transmitting the packet, once this is done, the packet is subject for loopback for if the DMAC mathces one of the multicast/unicast addresses registered on the physical port. In receive path if source MAC is our own MAC and we are not in selftest, or not in force LB mode - drop this packet. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13mlx4: Ethernet port management modificationsEugenia Emantayev9-261/+630
The physical port is now common to the PF and VFs. The port resources and configuration is managed by the PF, VFs can only influence the MTU of the port, it is set as max among all functions, Each function allocates RX buffers of required size to meet it's MTU enforcement. Port management code was moved to mlx4_core, as the mlx4_en module is virtualization unaware Move handling qp functionality to mlx4_get_eth_qp/mlx4_put_eth_qp including reserve/release range and add/release unicast steering. Let mlx4_register/unregister_mac deal only with MAC (un)registration. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.