aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-04-30KVM: x86: Whitelist port 0x7e for pre-incrementing %ripSean Christopherson2-2/+20
KVM's recent bug fix to update %rip after emulating I/O broke userspace that relied on the previous behavior of incrementing %rip prior to exiting to userspace. When running a Windows XP guest on AMD hardware, Qemu may patch "OUT 0x7E" instructions in reaction to the OUT itself. Because KVM's old behavior was to increment %rip before exiting to userspace to handle the I/O, Qemu manually adjusted %rip to account for the OUT instruction. Arguably this is a userspace bug as KVM requires userspace to re-enter the kernel to complete instruction emulation before taking any other actions. That being said, this is a bit of a grey area and breaking userspace that has worked for many years is bad. Pre-increment %rip on OUT to port 0x7e before exiting to userspace to hack around the issue. Fixes: 45def77ebf79e ("KVM: x86: update %rip after emulating IO") Reported-by: Simon Becherer <simon@becherer.de> Reported-and-tested-by: Iakov Karpov <srid@rkmail.ru> Reported-by: Gabriele Balducci <balducci@units.it> Reported-by: Antti Antinoja <reader@fennosys.fi> Cc: stable@vger.kernel.org Cc: Takashi Iwai <tiwai@suse.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-30Revert "ACPICA: Clear status of GPEs before enabling them"Rafael J. Wysocki1-5/+1
Revert commit c8b1917c8987 ("ACPICA: Clear status of GPEs before enabling them") that causes problems with Thunderbolt controllers to occur if a dock device is connected at init time (the xhci_hcd and thunderbolt modules crash which prevents peripherals connected through them from working). Commit c8b1917c8987 effectively causes commit ecc1165b8b74 ("ACPICA: Dispatch active GPEs at init time") to get undone, so the problem addressed by commit ecc1165b8b74 appears again as a result of it. Fixes: c8b1917c8987 ("ACPICA: Clear status of GPEs before enabling them") Link: https://lore.kernel.org/lkml/s5hy33siofw.wl-tiwai@suse.de/T/#u Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1132943 Reported-by: Michael Hirmke <opensuse@mike.franken.de> Reported-by: Takashi Iwai <tiwai@suse.de> Cc: 4.17+ <stable@vger.kernel.org> # 4.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-30Merge tag 'wireless-drivers-for-davem-2019-04-30' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-driversDavid S. Miller17-35/+88
Kalle Valo says: ==================== wireless-drivers fixes for 5.1 Third set of fixes for 5.1. iwlwifi * fix an oops when creating debugfs entries * fix bug when trying to capture debugging info while in rfkill * prevent potential uninitialized memory dumps into debugging logs * fix some initialization parameters for AX210 devices * fix an oops with non-MSIX devices * fix an oops when we receive a packet with bogus lengths * fix a bug that prevented 5350 devices from working * fix a small merge damage from the previous series mwifiex * fig regression with resume on SDIO ath10k * fix locking problem with crashdump * fix warnings during suspend and resume Also note that this pull conflicts with net-next. And I want to emphasie that it's really net-next, so when you pull this to net tree it should go without conflicts. Stephen reported the conflict here: https://lkml.kernel.org/r/20190429115338.5decb50b@canb.auug.org.au In iwlwifi oddly commit 154d4899e411 adds the IS_ERR_OR_NULL() in wireless-drivers but commit c9af7528c331 removes the whole check in wireless-drivers-next. The fix is easy, just drop the whole check for mvmvif->dbgfs_dir in iwlwifi/mvm/debugfs-vif.c, it's unneeded anyway. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30Merge tag 'usb-5.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds10-45/+46
Pull USB fixes from Greg KH: "Here are some small USB fixes for a bunch of warnings/errors that the syzbot has been finding with it's new-found ability to stress-test the USB layer. All of these are tiny, but fix real issues, and are marked for stable as well. All of these have had lots of testing in linux-next as well" * tag 'usb-5.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: w1 ds2490: Fix bug caused by improper use of altsetting array USB: yurex: Fix protection fault after device removal usb: usbip: fix isoc packet num validation in get_pipe USB: core: Fix bug caused by duplicate interface PM usage counter USB: dummy-hcd: Fix failure to give back unlinked URBs USB: core: Fix unterminated string returned by usb_string()
2019-04-30io_uring: remove unnecessary barrier after unsetting IORING_SQ_NEED_WAKEUPStefan Bühler1-2/+0
There is no operation to order with afterwards, and removing the flag is not critical in any way. There will always be a "race condition" where the application will trigger IORING_ENTER_SQ_WAKEUP when it isn't actually needed. Signed-off-by: Stefan Bühler <source@stbuehler.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30io_uring: remove unnecessary barrier after incrementing dropped counterStefan Bühler1-2/+0
smp_store_release in io_commit_sqring already orders the store to dropped before the update to SQ head. Signed-off-by: Stefan Bühler <source@stbuehler.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30io_uring: remove unnecessary barrier before reading SQ tailStefan Bühler1-2/+0
There is no operation before to order with. Signed-off-by: Stefan Bühler <source@stbuehler.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30io_uring: remove unnecessary barrier after updating SQ headStefan Bühler1-6/+0
There is no operation afterwards to order with. Signed-off-by: Stefan Bühler <source@stbuehler.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30io_uring: remove unnecessary barrier before reading cq headStefan Bühler1-2/+5
The memory operations before reading cq head are unrelated and we don't care about their order. Document that the control dependency in combination with READ_ONCE and WRITE_ONCE forms a barrier we need. Signed-off-by: Stefan Bühler <source@stbuehler.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30io_uring: remove unnecessary barrier before wq_has_sleeperStefan Bühler1-7/+4
wq_has_sleeper has a full barrier internally. The smp_rmb barrier in io_uring_poll synchronizes with it. Signed-off-by: Stefan Bühler <source@stbuehler.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30io_uring: fix notes on barriersStefan Bühler1-9/+110
The application reading the CQ ring needs a barrier to pair with the smp_store_release in io_commit_cqring, not the barrier after it. Also a write barrier *after* writing something (but not *before* writing anything interesting) doesn't order anything, so an smp_wmb() after writing SQ tail is not needed. Additionally consider reading SQ head and writing CQ tail in the notes. Also add some clarifications how the various other fields in the ring buffers are used. Signed-off-by: Stefan Bühler <source@stbuehler.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30io_uring: fix handling SQEs requesting NOWAITStefan Bühler1-7/+10
Not all request types set REQ_F_FORCE_NONBLOCK when they needed async punting; reverse logic instead and set REQ_F_NOWAIT if request mustn't be punted. Signed-off-by: Stefan Bühler <source@stbuehler.de> Merged with my previous patch for this. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30Merge tag 'selinux-pr-20190429' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinuxLinus Torvalds3-2/+1
Pull selinux fix from Paul Moore: "One small patch for the stable folks to fix a problem when building against the latest glibc. I'll be honest and say that I'm not really thrilled with the idea of sending this up right now, but Greg is a little annoyed so here I figured I would at least send this" * tag 'selinux-pr-20190429' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: use kernel linux/socket.h for genheaders and mdp
2019-04-30l2ip: fix possible use-after-freeEric Dumazet1-4/+4
Before taking a refcount on a rcu protected structure, we need to make sure the refcount is not zero. syzbot reported : refcount_t: increment on 0; use-after-free. WARNING: CPU: 1 PID: 23533 at lib/refcount.c:156 refcount_inc_checked lib/refcount.c:156 [inline] WARNING: CPU: 1 PID: 23533 at lib/refcount.c:156 refcount_inc_checked+0x61/0x70 lib/refcount.c:154 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 23533 Comm: syz-executor.2 Not tainted 5.1.0-rc7+ #93 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 panic+0x2cb/0x65c kernel/panic.c:214 __warn.cold+0x20/0x45 kernel/panic.c:571 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:179 [inline] fixup_bug arch/x86/kernel/traps.c:174 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:272 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:291 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:refcount_inc_checked lib/refcount.c:156 [inline] RIP: 0010:refcount_inc_checked+0x61/0x70 lib/refcount.c:154 Code: 1d 98 2b 2a 06 31 ff 89 de e8 db 2c 40 fe 84 db 75 dd e8 92 2b 40 fe 48 c7 c7 20 7a a1 87 c6 05 78 2b 2a 06 01 e8 7d d9 12 fe <0f> 0b eb c1 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 RSP: 0018:ffff888069f0fba8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 000000000000f353 RSI: ffffffff815afcb6 RDI: ffffed100d3e1f67 RBP: ffff888069f0fbb8 R08: ffff88809b1845c0 R09: ffffed1015d23ef1 R10: ffffed1015d23ef0 R11: ffff8880ae91f787 R12: ffff8880a8f26968 R13: 0000000000000004 R14: dffffc0000000000 R15: ffff8880a49a6440 l2tp_tunnel_inc_refcount net/l2tp/l2tp_core.h:240 [inline] l2tp_tunnel_get+0x250/0x580 net/l2tp/l2tp_core.c:173 pppol2tp_connect+0xc00/0x1c70 net/l2tp/l2tp_ppp.c:702 __sys_connect+0x266/0x330 net/socket.c:1808 __do_sys_connect net/socket.c:1819 [inline] __se_sys_connect net/socket.c:1816 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1816 Fixes: 54652eb12c1b ("l2tp: hold tunnel while looking up sessions in l2tp_netlink") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30appletalk: Set error code if register_snap_client failedYueHaibing1-0/+1
If register_snap_client fails in atalk_init, error code should be set, otherwise it will triggers NULL pointer dereference while unloading module. Fixes: 9804501fa122 ("appletalk: Fix potential NULL pointer dereference in unregister_snap_client") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfcDan Carpenter1-0/+6
The "fs->location" is a u32 that comes from the user in ethtool_set_rxnfc(). We can't pass unclamped values to test_bit() or it results in an out of bounds access beyond the end of the bitmap. Fixes: 7318166cacad ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30rxrpc: Fix net namespace cleanupDavid Howells1-16/+16
In rxrpc_destroy_all_calls(), there are two phases: (1) make sure the ->calls list is empty, emitting error messages if not, and (2) wait for the RCU cleanup to happen on outstanding calls (ie. ->nr_calls becomes 0). To avoid taking the call_lock, the function prechecks ->calls and if empty, it returns to avoid taking the lock - this is wrong, however: it still needs to go and do the second phase and wait for ->nr_calls to become 0. Without this, the rxrpc_net struct may get deallocated before we get to the RCU cleanup for the last calls. This can lead to: Slab corruption (Not tainted): kmalloc-16k start=ffff88802b178000, len=16384 050: 6b 6b 6b 6b 6b 6b 6b 6b 61 6b 6b 6b 6b 6b 6b 6b kkkkkkkkakkkkkkk Note the "61" at offset 0x58. This corresponds to the ->nr_calls member of struct rxrpc_net (which is >9k in size, and thus allocated out of the 16k slab). Fix this by flipping the condition on the if-statement, putting the locked section inside the if-body and dropping the return from there. The function will then always go on to wait for the RCU cleanup on outstanding calls. Fixes: 2baec2c3f854 ("rxrpc: Support network namespacing") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30ALSA: hda/realtek - Apply the fixup for ASUS Q325UARTakashi Iwai1-0/+4
Some ASUS models like Q325UAR with ALC295 codec requires the same fixup that has been applied to ALC294 codec. Just copy the entry with the pin matching to cover ALC295 too. BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1784485 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-30Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller13-49/+89
Steffen Klassert says: ==================== pull request (net): ipsec 2019-04-30 1) Fix an out-of-bound array accesses in __xfrm_policy_unlink. From YueHaibing. 2) Reset the secpath on failure in the ESP GRO handlers to avoid dereferencing an invalid pointer on error. From Myungho Jung. 3) Add and revert a patch that tried to add rcu annotations to netns_xfrm. From Su Yanjun. 4) Wait for rcu callbacks before freeing xfrm6_tunnel_spi_kmem. From Su Yanjun. 5) Fix forgotten vti4 ipip tunnel deregistration. From Jeremy Sowden: 6) Remove some duplicated log messages in vti4. From Jeremy Sowden. 7) Don't use IPSEC_PROTO_ANY when flushing states because this will flush only IPsec portocol speciffic states. IPPROTO_ROUTING states may remain in the lists when doing net exit. Fix this by replacing IPSEC_PROTO_ANY with zero. From Cong Wang. 8) Add length check for UDP encapsulation to fix "Oversized IP packet" warnings on receive side. From Sabrina Dubroca. 9) Fix xfrm interface lookup when the interface is associated to a vrf layer 3 master device. From Martin Willi. 10) Reload header pointers after pskb_may_pull() in _decode_session4(), otherwise we may read from uninitialized memory. 11) Update the documentation about xfrm[46]_gc_thresh, it is not used anymore after the flowcache removal. From Nicolas Dichtel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30Revert "drm/qxl: drop prime import/export callbacks"Gerd Hoffmann2-0/+16
This reverts commit f4c34b1e2a37d5676180901fa6ff188bcb6371f8. Simliar to commit a0cecc23cfcb Revert "drm/virtio: drop prime import/export callbacks". We have to do the same with qxl, for the same reasons (it breaks DRI3). Drop the WARN_ON_ONCE(). Fixes: f4c34b1e2a37d5676 ("drm/qxl: drop prime import/export callbacks") Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20190426053324.26443-1-kraxel@redhat.com Acked-by: Daniel Vetter <daniel@ffwll.ch>
2019-04-29ipv6/flowlabel: wait rcu grace period before put_pid()Eric Dumazet1-6/+12
syzbot was able to catch a use-after-free read in pid_nr_ns() [1] ip6fl_seq_show() seems to use RCU protection, dereferencing fl->owner.pid but fl_free() releases fl->owner.pid before rcu grace period is started. [1] BUG: KASAN: use-after-free in pid_nr_ns+0x128/0x140 kernel/pid.c:407 Read of size 4 at addr ffff888094012a04 by task syz-executor.0/18087 CPU: 0 PID: 18087 Comm: syz-executor.0 Not tainted 5.1.0-rc6+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131 pid_nr_ns+0x128/0x140 kernel/pid.c:407 ip6fl_seq_show+0x2f8/0x4f0 net/ipv6/ip6_flowlabel.c:794 seq_read+0xad3/0x1130 fs/seq_file.c:268 proc_reg_read+0x1fe/0x2c0 fs/proc/inode.c:227 do_loop_readv_writev fs/read_write.c:701 [inline] do_loop_readv_writev fs/read_write.c:688 [inline] do_iter_read+0x4a9/0x660 fs/read_write.c:922 vfs_readv+0xf0/0x160 fs/read_write.c:984 kernel_readv fs/splice.c:358 [inline] default_file_splice_read+0x475/0x890 fs/splice.c:413 do_splice_to+0x12a/0x190 fs/splice.c:876 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:953 do_splice_direct+0x1da/0x2a0 fs/splice.c:1062 do_sendfile+0x597/0xd00 fs/read_write.c:1443 __do_sys_sendfile64 fs/read_write.c:1498 [inline] __se_sys_sendfile64 fs/read_write.c:1490 [inline] __x64_sys_sendfile64+0x15a/0x220 fs/read_write.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458da9 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f300d24bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000458da9 RDX: 00000000200000c0 RSI: 0000000000000008 RDI: 0000000000000007 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000005a R11: 0000000000000246 R12: 00007f300d24c6d4 R13: 00000000004c5fa3 R14: 00000000004da748 R15: 00000000ffffffff Allocated by task 17543: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_kmalloc mm/kasan/common.c:497 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505 slab_post_alloc_hook mm/slab.h:437 [inline] slab_alloc mm/slab.c:3393 [inline] kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555 alloc_pid+0x55/0x8f0 kernel/pid.c:168 copy_process.part.0+0x3b08/0x7980 kernel/fork.c:1932 copy_process kernel/fork.c:1709 [inline] _do_fork+0x257/0xfd0 kernel/fork.c:2226 __do_sys_clone kernel/fork.c:2333 [inline] __se_sys_clone kernel/fork.c:2327 [inline] __x64_sys_clone+0xbf/0x150 kernel/fork.c:2327 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7789: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:459 kasan_slab_free+0xe/0x10 mm/kasan/common.c:467 __cache_free mm/slab.c:3499 [inline] kmem_cache_free+0x86/0x260 mm/slab.c:3765 put_pid.part.0+0x111/0x150 kernel/pid.c:111 put_pid+0x20/0x30 kernel/pid.c:105 fl_free+0xbe/0xe0 net/ipv6/ip6_flowlabel.c:102 ip6_fl_gc+0x295/0x3e0 net/ipv6/ip6_flowlabel.c:152 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 The buggy address belongs to the object at ffff888094012a00 which belongs to the cache pid_2 of size 88 The buggy address is located 4 bytes inside of 88-byte region [ffff888094012a00, ffff888094012a58) The buggy address belongs to the page: page:ffffea0002500480 count:1 mapcount:0 mapping:ffff88809a483080 index:0xffff888094012980 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea00018a3508 ffffea0002524a88 ffff88809a483080 raw: ffff888094012980 ffff888094012000 000000010000001b 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888094012900: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012980: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc >ffff888094012a00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ^ ffff888094012a80: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012b00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc Fixes: 4f82f45730c6 ("net ip6 flowlabel: Make owner a union of struct pid * and kuid_t") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29vrf: Use orig netdev to count Ip6InNoRoutes and a fresh route lookup when sending dest unreachStephen Suryaputra1-6/+17
When there is no route to an IPv6 dest addr, skb_dst(skb) points to loopback dev in the case of that the IP6CB(skb)->iif is enslaved to a vrf. This causes Ip6InNoRoutes to be incremented on the loopback dev. This also causes the lookup to fail on icmpv6_send() and the dest unreachable to not sent and Ip6OutNoRoutes gets incremented on the loopback dev. To reproduce: * Gateway configuration: ip link add dev vrf_258 type vrf table 258 ip link set dev enp0s9 master vrf_258 ip addr add 66:1/64 dev enp0s9 ip -6 route add unreachable default metric 8192 table 258 sysctl -w net.ipv6.conf.all.forwarding=1 sysctl -w net.ipv6.conf.enp0s9.forwarding=1 * Sender configuration: ip addr add 66::2/64 dev enp0s9 ip -6 route add default via 66::1 and ping 67::1 for example from the sender. Fix this by counting on the original netdev and reset the skb dst to force a fresh lookup. v2: Fix typo of destination address in the repro steps. v3: Simplify the loopback check (per David Ahern) and use reverse Christmas tree format (per David Miller). Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29tcp: add sanity tests in tcp_add_backlog()Eric Dumazet1-1/+12
Richard and Bruno both reported that my commit added a bug, and Bruno was able to determine the problem came when a segment wih a FIN packet was coalesced to a prior one in tcp backlog queue. It turns out the header prediction in tcp_rcv_established() looks back to TCP headers in the packet, not in the metadata (aka TCP_SKB_CB(skb)->tcp_flags) The fast path in tcp_rcv_established() is not supposed to handle a FIN flag (it does not call tcp_fin()) Therefore we need to make sure to propagate the FIN flag, so that the coalesced packet does not go through the fast path, the same than a GRO packet carrying a FIN flag. While we are at it, make sure we do not coalesce packets with RST or SYN, or if they do not have ACK set. Many thanks to Richard and Bruno for pinpointing the bad commit, and to Richard for providing a first version of the fix. Fixes: 4f693b55c3d2 ("tcp: implement coalescing on backlog queue") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org> Reported-by: Bruno Prémont <bonbons@sysophe.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29ipv6: invert flowlabel sharing check in process and user modeWillem de Bruijn1-2/+2
A request for a flowlabel fails in process or user exclusive mode must fail if the caller pid or uid does not match. Invert the test. Previously, the test was unsafe wrt PID recycling, but indeed tested for inequality: fl1->owner != fl->owner Fixes: 4f82f45730c68 ("net ip6 flowlabel: Make owner a union of struct pid* and kuid_t") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29Merge branch 'ieee802154-for-davem-2019-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpanDavid S. Miller1-0/+6
Stefan Schmidt says: ==================== ieee802154 for net 2019-04-25 An update from ieee802154 for your *net* tree. Another fix from Kangjie Lu to ensure better checking regmap updates in the mcr20a driver. Nothing else I have pending for the final release. If there are any problems let me know. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29Merge tag 'seccomp-v5.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds2-11/+40
Pull seccomp fixes from Kees Cook: "Syzbot found a use-after-free bug in seccomp due to flags that should not be allowed to be used together. Tycho fixed this, I updated the self-tests, and the syzkaller PoC has been running for several days without triggering KASan (before this fix, it would reproduce). These patches have also been in -next for almost a week, just to be sure. - Add logic for making some seccomp flags exclusive (Tycho) - Update selftests for exclusivity testing (Kees)" * tag 'seccomp-v5.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: Make NEW_LISTENER and TSYNC flags exclusive selftests/seccomp: Prepare for exclusive seccomp flags
2019-04-29x86: make ZERO_PAGE() at least parse its argumentLinus Torvalds1-1/+1
This doesn't really do anything, but at least we now parse teh ZERO_PAGE() address argument so that we'll catch the most obvious errors in usage next time they'll happen. See commit 6a5c5d26c4c6 ("rdma: fix build errors on s390 and MIPS due to bad ZERO_PAGE use") what happens when we don't have any use of the macro argument at all. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-29rdma: fix build errors on s390 and MIPS due to bad ZERO_PAGE useLinus Torvalds1-1/+1
The parameter to ZERO_PAGE() was wrong, but since all architectures except for MIPS and s390 ignore it, it wasn't noticed until 0-day reported the build error. Fixes: 67f269b37f9b ("RDMA/ucontext: Fix regression with disassociate") Cc: stable@vger.kernel.org Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-29Merge ath-current from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo7-11/+31
ath.git fixes for 5.1. Major changes: ath10k * fix locking problem with crashdump * fix warnings during suspend and resume
2019-04-29selinux: use kernel linux/socket.h for genheaders and mdpPaulo Alcantara3-2/+1
When compiling genheaders and mdp from a newer host kernel, the following error happens: In file included from scripts/selinux/genheaders/genheaders.c:18: ./security/selinux/include/classmap.h:238:2: error: #error New address family defined, please update secclass_map. #error New address family defined, please update secclass_map. ^~~~~ make[3]: *** [scripts/Makefile.host:107: scripts/selinux/genheaders/genheaders] Error 1 make[2]: *** [scripts/Makefile.build:599: scripts/selinux/genheaders] Error 2 make[1]: *** [scripts/Makefile.build:599: scripts/selinux] Error 2 make[1]: *** Waiting for unfinished jobs.... Instead of relying on the host definition, include linux/socket.h in classmap.h to have PF_MAX. Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara <paulo@paulo.ac> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> [PM: manually merge in mdp.c, subject line tweaks] Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-04-29Merge tag 'mac80211-for-davem-2019-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211David S. Miller4-6/+9
Johannes Berg says: ==================== * fix use-after-free in mac80211 TXQs * fix RX STBC byte order * fix debugfs rename crashing due to ERR_PTR() * fix missing regulatory notification ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29ath10k: Drop WARN_ON()s that always trigger during system resumeRafael J. Wysocki1-2/+2
ath10k_mac_vif_chan() always returns an error for the given vif during system-wide resume which reliably triggers two WARN_ON()s in ath10k_bss_info_changed() and they are not particularly useful in that code path, so drop them. Tested: QCA6174 hw3.2 PCI with WLAN.RM.2.0-00180-QCARMSWPZ-1 Tested: QCA6174 hw3.2 SDIO with WLAN.RMH.4.4.1-00007-QCARMSWP-1 Fixes: cd93b83ad927 ("ath10k: support for multicast rate control") Fixes: f279294e9ee2 ("ath10k: add support for configuring management packet rate") Cc: stable@vger.kernel.org Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Claire Chang <tientzu@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-29ath10k: perform crash dump collection in workqueueBrian Norris6-9/+29
Commit 25733c4e67df ("ath10k: pci: use mutex for diagnostic window CE polling") introduced a regression where we try to sleep (grab a mutex) in an atomic context: [ 233.602619] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:254 [ 233.602626] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/0 [ 233.602636] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.1.0-rc2 #4 [ 233.602642] Hardware name: Google Scarlet (DT) [ 233.602647] Call trace: [ 233.602663] dump_backtrace+0x0/0x11c [ 233.602672] show_stack+0x20/0x28 [ 233.602681] dump_stack+0x98/0xbc [ 233.602690] ___might_sleep+0x154/0x16c [ 233.602696] __might_sleep+0x78/0x88 [ 233.602704] mutex_lock+0x2c/0x5c [ 233.602717] ath10k_pci_diag_read_mem+0x68/0x21c [ath10k_pci] [ 233.602725] ath10k_pci_diag_read32+0x48/0x74 [ath10k_pci] [ 233.602733] ath10k_pci_dump_registers+0x5c/0x16c [ath10k_pci] [ 233.602741] ath10k_pci_fw_crashed_dump+0xb8/0x548 [ath10k_pci] [ 233.602749] ath10k_pci_napi_poll+0x60/0x128 [ath10k_pci] [ 233.602757] net_rx_action+0x140/0x388 [ 233.602766] __do_softirq+0x1b0/0x35c [...] ath10k_pci_fw_crashed_dump() is called from NAPI contexts, and firmware memory dumps are retrieved using the diag memory interface. A simple reproduction case is to run this on QCA6174A / WLAN.RM.4.4.1-00132-QCARMSWP-1, which happens to be a way to b0rk the firmware: dd if=/sys/kernel/debug/ieee80211/phy0/ath10k/mem_value bs=4K count=1 of=/dev/null (NB: simulated firmware crashes, via debugfs, don't trigger firmware dumps.) The fix is to move the crash-dump into a workqueue context, and avoid relying on 'data_lock' for most mutual exclusion. We only keep using it here for protecting 'fw_crash_counter', while the rest of the coredump buffers are protected by a new 'dump_mutex'. I've tested the above with simulated firmware crashes (debugfs 'reset' file), real firmware crashes (the 'dd' command above), and a variety of reboot and suspend/resume configurations on QCA6174A. Reported here: http://lkml.kernel.org/linux-wireless/20190325202706.GA68720@google.com Fixes: 25733c4e67df ("ath10k: pci: use mutex for diagnostic window CE polling") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-29Documentation: kvm: fix dirty log ioctl arch listsAndrew Jones1-3/+3
KVM_GET_DIRTY_LOG is implemented by all architectures, not just x86, and KVM_CAP_MANUAL_DIRTY_LOG_PROTECT is additionally implemented by arm, arm64, and mips. Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-28Linux 5.1-rc7Linus Torvalds1-1/+1
2019-04-28fsnotify: Fix NULL ptr deref in fanotify_get_fsid()Jan Kara2-8/+18
fanotify_get_fsid() is reading mark->connector->fsid under srcu. It can happen that it sees mark not fully initialized or mark that is already detached from the object list. In these cases mark->connector can be NULL leading to NULL ptr dereference. Fix the problem by being careful when reading mark->connector and check it for being NULL. Also use WRITE_ONCE when writing the mark just to prevent compiler from doing something stupid. Reported-by: syzbot+15927486a4f1bfcbaf91@syzkaller.appspotmail.com Fixes: 77115225acc6 ("fanotify: cache fsid in fsnotify_mark_connector") Signed-off-by: Jan Kara <jack@suse.cz>
2019-04-28Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds4-6/+20
Pull ARM fixes from Russell King: "A small number of ARM fixes - Fix function tracer and unwinder dependencies so that we don't end up building kernels that will crash - Fix ARMv7M nommu initialisation (missing register initialisation) - Fix EFI decompressor entry (ensuring barrier instructions are enabled prior to use)" * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8857/1: efi: enable CP15 DMB instructions before cleaning the cache ARM: 8856/1: NOMMU: Fix CCR register faulty initialization when MPU is disabled ARM: fix function graph tracer and unwinder dependencies
2019-04-28Merge tag 'powerpc-5.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds3-40/+60
Pull powerpc fixes from Michael Ellerman: "A one-liner to make our Radix MMU support depend on HUGETLB_PAGE. We use some of the hugetlb inlines (eg. pud_huge()) when operating on the linear mapping and if they're compiled into empty wrappers we can corrupt memory. Then two fixes to our VFIO IOMMU code. The first is not a regression but fixes the locking to avoid a user-triggerable deadlock. The second does fix a regression since rc1, and depends on the first fix. It makes it possible to run guests with large amounts of memory again (~256GB). Thanks to Alexey Kardashevskiy" * tag 'powerpc-5.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm_iommu: Allow pinning large regions powerpc/mm_iommu: Fix potential deadlock powerpc/mm/radix: Make Radix require HUGETLB_PAGE
2019-04-28Merge tag 'for-linus-20190428' of git://git.kernel.dk/linux-blockLinus Torvalds1-16/+26
Pull block fixes from Jens Axboe: "A set of io_uring fixes that should go into this release. In particular, this contains: - The mutex lock vs ctx ref count fix (me) - Removal of a dead variable (me) - Two race fixes (Stefan) - Ring head/tail condition fix for poll full SQ detection (Stefan)" * tag 'for-linus-20190428' of git://git.kernel.dk/linux-block: io_uring: remove 'state' argument from io_{read,write} path io_uring: fix poll full SQ detection io_uring: fix race condition when sq threads goes sleeping io_uring: fix race condition reading SQ entries io_uring: fail io_uring_register(2) on a dying io_uring instance
2019-04-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds7-20/+76
Pull rdma fixes from Jason Gunthorpe: "One core bug fix and a few driver ones - FRWR memory registration for hfi1/qib didn't work with with some iovas causing a NFSoRDMA failure regression due to a fix in the NFS side - A command flow error in mlx5 allowed user space to send a corrupt command (and also smash the kernel stack we've since learned) - Fix a regression and some bugs with device hot unplug that was discovered while reviewing Andrea's patches - hns has a failure if the user asks for certain QP configurations" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/hns: Bugfix for mapping user db RDMA/ucontext: Fix regression with disassociate RDMA/mlx5: Use rdma_user_map_io for mapping BAR pages RDMA/mlx5: Do not allow the user to write to the clock page IB/mlx5: Fix scatter to CQE in DCT QP creation IB/rdmavt: Fix frwr memory registration
2019-04-28Merge tag 'dmaengine-fix-5.1-rc7' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds3-6/+28
Pull dmaengine fixes from Vinod Koul: - fix for wrong register use in mediatek driver - fix in sh driver for glitch is tx_status and treating 0 a valid residue for cyclic - fix in bcm driver for using right memory allocation flag * tag 'dmaengine-fix-5.1-rc7' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: mediatek-cqdma: fix wrong register usage in mtk_cqdma_start dmaengine: sh: rcar-dmac: Fix glitch in dmaengine_tx_status dmaengine: sh: rcar-dmac: With cyclic DMA residue 0 is valid dmaengine: bcm2835: Avoid GFP_KERNEL in device_prep_slave_sg
2019-04-28ALSA: line6: use dynamic buffersGreg Kroah-Hartman3-40/+65
The line6 driver uses a lot of USB buffers off of the stack, which is not allowed on many systems, causing the driver to crash on some of them. Fix this up by dynamically allocating the buffers with kmalloc() which allows for proper DMA-able memory. Reported-by: Christo Gouws <gouws.christo@gmail.com> Reported-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Christo Gouws <gouws.christo@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-28Merge tag 'iwlwifi-for-kalle-2019-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixesKalle Valo3-11/+26
Fourth batch of patches intended for v5.1 * Fix an oops when we receive a packet with bogus lengths; * Fix a bug that prevented 5350 devices from working; * Fix a small merge damage from the previous series;
2019-04-28iwlwifi: mvm: fix merge damage in iwl_mvm_vif_dbgfs_register()Luca Coelho1-6/+0
When I rebased Greg's patch, I accidentally left the old if block that was already there. Remove it. Fixes: 154d4899e411 ("iwlwifi: mvm: properly check debugfs dentry before using it") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-28iwlwifi: fix driver operation for 5350Emmanuel Grumbach1-1/+2
We introduced a bug that prevented this old device from working. The driver would simply not be able to complete the INIT flow while spewing this warning: CSR addresses aren't configured WARNING: CPU: 0 PID: 819 at drivers/net/wireless/intel/iwlwifi/pcie/drv.c:917 iwl_pci_probe+0x160/0x1e0 [iwlwifi] Cc: stable@vger.kernel.org # v4.18+ Fixes: a8cbb46f831d ("iwlwifi: allow different csr flags for different device families") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: c8f1b51e506d ("iwlwifi: allow different csr flags for different device families") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-28iwlwifi: mvm: check for length correctness in iwl_mvm_create_skb()Luca Coelho1-4/+24
We don't check for the validity of the lengths in the packet received from the firmware. If the MPDU length received in the rx descriptor is too short to contain the header length and the crypt length together, we may end up trying to copy a negative number of bytes (headlen - hdrlen < 0) which will underflow and cause us to try to copy a huge amount of data. This causes oopses such as this one: BUG: unable to handle kernel paging request at ffff896be2970000 PGD 5e201067 P4D 5e201067 PUD 5e205067 PMD 16110d063 PTE 8000000162970161 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 1824 Comm: irq/134-iwlwifi Not tainted 4.19.33-04308-geea41cf4930f #1 Hardware name: [...] RIP: 0010:memcpy_erms+0x6/0x10 Code: 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe RSP: 0018:ffffa4630196fc60 EFLAGS: 00010287 RAX: ffff896be2924618 RBX: ffff896bc8ecc600 RCX: 00000000fffb4610 RDX: 00000000fffffff8 RSI: ffff896a835e2a38 RDI: ffff896be2970000 RBP: ffffa4630196fd30 R08: ffff896bc8ecc600 R09: ffff896a83597000 R10: ffff896bd6998400 R11: 000000000200407f R12: ffff896a83597050 R13: 00000000fffffff8 R14: 0000000000000010 R15: ffff896a83597038 FS: 0000000000000000(0000) GS:ffff896be8280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff896be2970000 CR3: 000000005dc12002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: iwl_mvm_rx_mpdu_mq+0xb51/0x121b [iwlmvm] iwl_pcie_rx_handle+0x58c/0xa89 [iwlwifi] iwl_pcie_irq_rx_msix_handler+0xd9/0x12a [iwlwifi] irq_thread_fn+0x24/0x49 irq_thread+0xb0/0x122 kthread+0x138/0x140 ret_from_fork+0x1f/0x40 Fix that by checking the lengths for correctness and trigger a warning to show that we have received wrong data. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-28ALSA: hda/realtek - Fixed Dell AIO speaker noiseKailang Yang1-0/+2
Fixed Dell AIO speaker noise. spec->gen.auto_mute_via_amp = 1, this option was solved speaker white noise at boot. codec->power_save_node = 0, this option was solved speaker noise at resume back. Fixes: 9226665159f0 ("ALSA: hda/realtek - Fix Dell AIO LineOut issue") Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-27udp: fix GRO reception in case of length mismatchPaolo Abeni1-4/+5
Currently, the UDP GRO code path does bad things on some edge conditions - Aggregation can happen even on packet with different lengths. Fix the above by rewriting the 'complete' condition for GRO packets. While at it, note explicitly that we allow merging the first packet per burst below gso_size. Reported-by: Sean Tong <seantong114@gmail.com> Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27Merge branch 'tls-data-copies'David S. Miller1-11/+28
Jakub Kicinski says: ==================== net/tls: fix data copies in tls_device_reencrypt() This series fixes the tls_device_reencrypt() which is broken if record starts in the frags of the message skb. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net/tls: fix copy to fragments in reencryptJakub Kicinski1-7/+22
Fragments may contain data from other records so we have to account for that when we calculate the destination and max length of copy we can perform. Note that 'offset' is the offset within the message, so it can't be passed as offset within the frag.. Here skb_store_bits() would have realised the call is wrong and simply not copy data. Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>