aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-03-19igc: Remove unneeded hw_dbg printsSasha Neftin1-4/+0
Remove unneeded hw_dbg prints from igc_ethtool.c file. Clean up code. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19igc: Fix the typo in igc_base.h header definitionSasha Neftin1-2/+2
Add the underline for the _IGC_BASE_H_. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19igc: Add support for the ntuple featureSasha Neftin2-0/+89
Copy the ntuple feature into list of user selectable features. Enable the ntuple feature. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19igc: Add support for statisticsSasha Neftin3-1/+403
Add support for statistics and show basic counters. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19igc: Extend the ethtool supportingSasha Neftin5-3/+814
Add show and configure network flow classification (NFC) methods to the ethtool. Show the specifies Rx ntuple filters. Configures receive network flow classification option or rules. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19igc: Add multiple receive queues control supportingSasha Neftin4-0/+73
Enable the multi queues to receive. Program the direction of packets to specified queues according to the mode selected in the MRQC register. Multiple receive queues defined by filters and RSS for 4 queues. Enable/disable RSS hashing and also to enable multiple receive queues. This patch will allow further ethtool support development. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19e1000e: Disable runtime PM on CNP+Kai-Heng Feng1-1/+1
There are some new e1000e devices can only be woken up from D3 one time, by plugging Ethernet cable. Subsequent cable plugging does set PME bit correctly, but it still doesn't get woken up. Since e1000e connects to the root complex directly, we rely on ACPI to wake it up. In this case, the GPE from _PRW only works once and stops working after that. Though it appears to be a platform bug, e1000e maintainers confirmed that I219 does not support D3. So disable runtime PM on CNP+ chips. We may need to disable earlier generations if this bug also hit older platforms. Bugzilla: https://bugzilla.kernel.org/attachment.cgi?id=280819 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19igb: fix various indentation issuesColin Ian King1-2/+2
There are some lines that have indentation issues, fix these Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19igb: Exclude device from suspend direct complete optimizationKai-Heng Feng1-0/+3
igb sets different WoL settings in system suspend callback and runtime suspend callback. The suspend direct complete optimization leaves igb in runtime suspended state with wrong WoL setting during system suspend. To fix this, we need to disable suspend direct complete optimization to let igb always use suspend callback to set correct WoL during system suspend. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19intel: correct return from set features callbackSerhey Popovych5-5/+5
According to comments in <linux/netdevice.h> we should return either >0 or -errno from ->ndo_set_features() if changing dev->features by itself. Return 1 in such places to notify netdev_update_features() about applied changes in dev->features. Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-18virtio_net: remove hcpu from virtnet_clean_affinityPeter Xu1-4/+4
The variable is never used. CC: Michael S. Tsirkin <mst@redhat.com> CC: Jason Wang <jasowang@redhat.com> CC: virtualization@lists.linux-foundation.org CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18Documentation: networking: Update netdev-FAQ regarding patchesFlorian Fainelli1-0/+13
Provide an explanation of what is expected with respect to sending new versions of specific patches within a patch series, as well as what happens if an earlier patch series accidentally gets merged). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18Merge branch 's390-qeth-fixes'David S. Miller3-9/+11
Julian Wiedmann says: ==================== s390/qeth: fixes 2019-03-18 please apply the following three patches to -net. The first two are fixes for minor race conditions in the probe code, while the third one gets dropwatch working (again). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18s390/qeth: be drop monitor friendlyJulian Wiedmann3-5/+6
As part of the TX completion path, qeth_release_skbs() frees the completed skbs with __skb_queue_purge(). This ends in kfree_skb(), reporting every completed skb as dropped. On the other hand when dropping an skb in .ndo_start_xmit, we end up calling consume_skb()... where we should be using kfree_skb() so that drop monitors get notified. Switch the drop/consume logic around, and also don't accumulate dropped packets in the tx_errors statistics. Fixes: dc149e3764d8 ("s390/qeth: replace open-coded skb_queue_walk()") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18s390/qeth: fix race when initializing the IP address tableJulian Wiedmann1-1/+3
The ucast IP table is utilized by some of the L3-specific sysfs attributes that qeth_l3_create_device_attributes() provides. So initialize the table _before_ registering the attributes. Fixes: ebccc7397e4a ("s390/qeth: add missing hash table initializations") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18s390/qeth: don't erase configuration while probingJulian Wiedmann2-3/+2
The HW trap and VNICC configuration is exposed via sysfs, and may have already been modified when qeth_l?_probe_device() attempts to initialize them. So (1) initialize the VNICC values a little earlier, and (2) don't bother about the HW trap mode, it was already initialized before. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18mISDN: hfcpci: Test both vendor & device ID for Digium HFC4SBjorn Helgaas1-1/+2
The device ID alone does not uniquely identify a device. Test both the vendor and device ID to make sure we don't mistakenly think some other vendor's 0xB410 device is a Digium HFC4S. Also, instead of the bare hex ID, use the same constant (PCI_DEVICE_ID_DIGIUM_HFC4S) used in the device ID table. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18Merge branch 'sctp-fix-ignoring-asoc_id-for-tcp-style-sockets-on-some-setsockopts'David S. Miller1-0/+39
Xin Long says: ==================== sctp: fix ignoring asoc_id for tcp-style sockets on some setsockopts This is a patchset to fix ignoring asoc_id for tcp-style sockets on some setsockopts, introduced by SCTP_CURRENT_ASSOC of the patchset: [net-next,00/24] sctp: support SCTP_FUTURE/CURRENT/ALL_ASSOC (https://patchwork.ozlabs.org/cover/1031706/) As Marcelo suggested, we fix it on each setsockopt that is using SCTP_CURRENT_ASSOC one by one by adding the check: if (sctp_style(sk, TCP)) xxx.xxx_assoc_id = SCTP_FUTURE_ASSOC; so that assoc_id will be completely ingored for tcp-style socket on setsockopts, and works as SCTP_FUTURE_ASSOC. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_STREAM_SCHEDULER sockoptXin Long1-0/+3
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_STREAM_SCHEDULER sockopt. Fixes: 7efba10d6bd2 ("sctp: add SCTP_FUTURE_ASOC and SCTP_CURRENT_ASSOC for SCTP_STREAM_SCHEDULER sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_EVENT sockoptXin Long1-0/+3
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_EVENT sockopt. Fixes: d251f05e3ba2 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_EVENT sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_ENABLE_STREAM_RESET sockoptXin Long1-0/+3
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_ENABLE_STREAM_RESET sockopt. Fixes: 99a62135e127 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_ENABLE_STREAM_RESET sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_PRINFO sockoptXin Long1-0/+3
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_DEFAULT_PRINFO sockopt. Fixes: 3a583059d187 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_DEFAULT_PRINFO sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_AUTH_DEACTIVATE_KEY sockoptXin Long1-0/+3
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_AUTH_DEACTIVATE_KEY sockopt. Fixes: 2af66ff3edc7 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_AUTH_DEACTIVATE_KEY sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_AUTH_DELETE_KEY sockoptXin Long1-0/+3
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_AUTH_DELETE_KEY sockopt. Fixes: 3adcc300603e ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_AUTH_DELETE_KEY sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_AUTH_ACTIVE_KEY sockoptXin Long1-0/+3
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_AUTH_ACTIVE_KEY sockopt. Fixes: bf9fb6ad4f29 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_AUTH_ACTIVE_KEY sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_AUTH_KEY sockoptXin Long1-0/+3
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_AUTH_KEY sockopt. Fixes: 7fb3be13a236 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_AUTH_KEY sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_MAX_BURST sockoptXin Long1-0/+3
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_MAX_BURST sockopt. Fixes: e0651a0dc877 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_MAX_BURST sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_CONTEXT sockoptXin Long1-0/+3
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_CONTEXT sockopt. Fixes: 49b037acca8c ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_CONTEXT sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SNDINFO sockoptXin Long1-0/+3
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_DEFAULT_SNDINFO sockopt. Fixes: 92fc3bd928c9 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_DEFAULT_SNDINFO sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DELAYED_SACK sockoptXin Long1-0/+3
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_DELAYED_SACK sockopt. Fixes: 9c5829e1c49e ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_DELAYED_SACK sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockoptMarcelo Ricardo Leitner1-0/+3
Currently if the user pass an invalid asoc_id to SCTP_DEFAULT_SEND_PARAM on a TCP-style socket, it will silently ignore the new parameters. That's because after not finding an asoc, it is checking asoc_id against the known values of CURRENT/FUTURE/ALL values and that fails to match. IOW, if the user supplies an invalid asoc id or not, it should either match the current asoc or the socket itself so that it will inherit these later. Fixes it by forcing asoc_id to SCTP_FUTURE_ASSOC in case it is a TCP-style socket without an asoc, so that the values get set on the socket. Fixes: 707e45b3dc5a ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_DEFAULT_SEND_PARAM sockopt") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18sctp: not copy sctp_sock pd_lobby in sctp_copy_descendantXin Long1-2/+1
Now sctp_copy_descendant() copies pd_lobby from old sctp scok to new sctp sock. If sctp_sock_migrate() returns error, it will panic when releasing new sock and trying to purge pd_lobby due to the incorrect pointers in pd_lobby. [ 120.485116] kasan: CONFIG_KASAN_INLINE enabled [ 120.486270] kasan: GPF could be caused by NULL-ptr deref or user [ 120.509901] Call Trace: [ 120.510443] sctp_ulpevent_free+0x1e8/0x490 [sctp] [ 120.511438] sctp_queue_purge_ulpevents+0x97/0xe0 [sctp] [ 120.512535] sctp_close+0x13a/0x700 [sctp] [ 120.517483] inet_release+0xdc/0x1c0 [ 120.518215] __sock_release+0x1d2/0x2a0 [ 120.519025] sctp_do_peeloff+0x30f/0x3c0 [sctp] We fix it by not copying sctp_sock pd_lobby in sctp_copy_descendan(), and skb_queue_head_init() can also be removed in sctp_sock_migrate(). Reported-by: syzbot+85e0b422ff140b03672a@syzkaller.appspotmail.com Fixes: 89664c623617 ("sctp: sctp_sock_migrate() returns error if sctp_bind_addr_dup() fails") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18sctp: get sctphdr by offset in sctp_compute_cksumXin Long1-1/+1
sctp_hdr(skb) only works when skb->transport_header is set properly. But in Netfilter, skb->transport_header for ipv6 is not guaranteed to be right value for sctphdr. It would cause to fail to check the checksum for sctp packets. So fix it by using offset, which is always right in all places. v1->v2: - Fix the changelog. Fixes: e6d8b64b34aa ("net: sctp: fix and consolidate SCTP checksumming code") Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18af_packet: fix the tx skb protocol in raw sockets with ETH_P_ALLYoshiki Komachi1-1/+2
I am using "protocol ip" filters in TC to manipulate TC flower classifiers, which are only available with "protocol ip". However, I faced an issue that packets sent via raw sockets with ETH_P_ALL did not match the ip filters even if they did satisfy the condition (e.g., DHCP offer from dhcpd). I have determined that the behavior was caused by an unexpected value stored in skb->protocol, namely, ETH_P_ALL instead of ETH_P_IP, when packets were sent via raw sockets with ETH_P_ALL set. IMHO, storing ETH_P_ALL in skb->protocol is not appropriate for packets sent via raw sockets because ETH_P_ALL is not a real ether type used on wire, but a virtual one. This patch fixes the tx protocol selection in cases of transmission via raw sockets created with ETH_P_ALL so that it asks the driver to extract protocol from the Ethernet header. Fixes: 75c65772c3 ("net/packet: Ask driver for protocol if not provided by user") Signed-off-by: Yoshiki Komachi <komachi.yoshiki@lab.ntt.co.jp> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18packets: Always register packet sk in the same orderMaxime Chevallier2-1/+7
When using fanouts with AF_PACKET, the demux functions such as fanout_demux_cpu will return an index in the fanout socket array, which corresponds to the selected socket. The ordering of this array depends on the order the sockets were added to a given fanout group, so for FANOUT_CPU this means sockets are bound to cpus in the order they are configured, which is OK. However, when stopping then restarting the interface these sockets are bound to, the sockets are reassigned to the fanout group in the reverse order, due to the fact that they were inserted at the head of the interface's AF_PACKET socket list. This means that traffic that was directed to the first socket in the fanout group is now directed to the last one after an interface restart. In the case of FANOUT_CPU, traffic from CPU0 will be directed to the socket that used to receive traffic from the last CPU after an interface restart. This commit introduces a helper to add a socket at the tail of a list, then uses it to register AF_PACKET sockets. Note that this changes the order in which sockets are listed in /proc and with sock_diag. Fixes: dc99f600698d ("packet: Add fanout support") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18vxlan: Don't call gro_cells_destroy() before device is unregisteredZhiqiang Liu1-3/+1
Commit ad6c9986bcb62 ("vxlan: Fix GRO cells race condition between receive and link delete") fixed a race condition for the typical case a vxlan device is dismantled from the current netns. But if a netns is dismantled, vxlan_destroy_tunnels() is called to schedule a unregister_netdevice_queue() of all the vxlan tunnels that are related to this netns. In vxlan_destroy_tunnels(), gro_cells_destroy() is called and finished before unregister_netdevice_queue(). This means that the gro_cells_destroy() call is done too soon, for the same reasons explained in above commit. So we need to fully respect the RCU rules, and thus must remove the gro_cells_destroy() call or risk use after-free. Fixes: 58ce31cca1ff ("vxlan: GRO support at tunnel layer") Signed-off-by: Suanming.Mou <mousuanming@huawei.com> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18net: aquantia: fix rx checksum offload for UDP/TCP over IPv6Dmitry Bogdanov1-2/+3
TCP/UDP checksum validity was propagated to skb only if IP checksum is valid. But for IPv6 there is no validity as there is no checksum in IPv6. This patch propagates TCP/UDP checksum validity regardless of IP checksum. Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18mac8390: Fix mmio access size probeFinn Thain1-7/+12
The bug that Stan reported is as follows. After a restart, a 16-bit NIC may be incorrectly identified as a 32-bit NIC and stop working. mac8390 slot.E: Memory length resource not found, probing mac8390 slot.E: Farallon EtherMac II-C (type farallon) mac8390 slot.E: MAC 00:00:c5:30:c2:99, IRQ 61, 32 KB shared memory at 0xfeed0000, 32-bit access. The bug never arises after a cold start and only intermittently after a warm start. (I didn't investigate why the bug is intermittent.) It turns out that memcpy_toio() is deprecated and memcmp_withio() also has issues. Replacing these calls with mmio accessors fixes the problem. Reported-and-tested-by: Stan Johnson <userm57@yahoo.com> Fixes: 2964db0f5904 ("m68k: Mac DP8390 update") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18gtp: change NET_UDP_TUNNEL dependency to selectMatteo Croce1-2/+2
Similarly to commit a7603ac1fc8c ("geneve: change NET_UDP_TUNNEL dependency to select"), GTP has a dependency on NET_UDP_TUNNEL which makes impossible to compile it if no other protocol depending on NET_UDP_TUNNEL is selected. Fix this by changing the depends to a select, and drop NET_IP_TUNNEL from the select list, as it already depends on NET_UDP_TUNNEL. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18net: rose: fix a possible stack overflowEric Dumazet1-9/+12
rose_write_internal() uses a temp buffer of 100 bytes, but a manual inspection showed that given arbitrary input, rose_create_facilities() can fill up to 110 bytes. Lets use a tailroom of 256 bytes for peace of mind, and remove the bounce buffer : we can simply allocate a big enough skb and adjust its length as needed. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:352 [inline] BUG: KASAN: stack-out-of-bounds in rose_create_facilities net/rose/rose_subr.c:521 [inline] BUG: KASAN: stack-out-of-bounds in rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116 Write of size 7 at addr ffff88808b1ffbef by task syz-executor.0/24854 CPU: 0 PID: 24854 Comm: syz-executor.0 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:131 memcpy include/linux/string.h:352 [inline] rose_create_facilities net/rose/rose_subr.c:521 [inline] rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116 rose_connect+0x7cb/0x1510 net/rose/af_rose.c:826 __sys_connect+0x266/0x330 net/socket.c:1685 __do_sys_connect net/socket.c:1696 [inline] __se_sys_connect net/socket.c:1693 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1693 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458079 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f47b8d9dc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458079 RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f47b8d9e6d4 R13: 00000000004be4a4 R14: 00000000004ceca8 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00022c7fc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff022c0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88808b1ffa80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808b1ffb00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 03 >ffff88808b1ffb80: f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 04 f3 ^ ffff88808b1ffc00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808b1ffc80: 00 00 00 00 00 00 00 f1 f1 f1 f1 f1 f1 01 f2 01 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18doc: fix link to MSG_ZEROCOPY patchsetTobias Klauser1-1/+1
Use https and link to the patch directly. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-17tipc: allow service ranges to be connect()'ed on RDM/DGRAMErik Hugne1-5/+15
We move the check that prevents connecting service ranges to after the RDM/DGRAM check, and move address sanity control to a separate function that also validates the service range. Fixes: 23998835be98 ("tipc: improve address sanity check in tipc_connect()") Signed-off-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-17networking: fix snmp_counter.rst Doc. WarningsRandy Dunlap1-3/+9
Fix documentation markup warnings in snmp_counter.rst: Documentation/networking/snmp_counter.rst:416: WARNING: Title underline too short. Documentation/networking/snmp_counter.rst:684: WARNING: Bullet list ends without a blank line; unexpected unindent. Documentation/networking/snmp_counter.rst:693: WARNING: Title underline too short. Documentation/networking/snmp_counter.rst:707: WARNING: Bullet list ends without a blank line; unexpected unindent. Documentation/networking/snmp_counter.rst:712: WARNING: Bullet list ends without a blank line; unexpected unindent. Documentation/networking/snmp_counter.rst:722: WARNING: Title underline too short. Documentation/networking/snmp_counter.rst:733: WARNING: Bullet list ends without a blank line; unexpected unindent. Documentation/networking/snmp_counter.rst:736: WARNING: Bullet list ends without a blank line; unexpected unindent. Documentation/networking/snmp_counter.rst:739: WARNING: Bullet list ends without a blank line; unexpected unindent. Fixes: 80cc49507ba48 ("net: Add part of TCP counts explanations in snmp_counters.rst") Fixes: 8e2ea53a83dfb ("add snmp counters document") Fixes: a6c7c7aac2de6 ("net: add document for several snmp counters") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: yupeng <yupeng0921@gmail.com>
2019-03-16net: tipc: fix a missing check for nla_nest_startKangjie Lu1-0/+2
nla_nest_start may fail. The fix check its status and returns -EMSGSIZE in case it fails. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-16tun: add a missing rcu_read_unlock() in error pathEric Dumazet1-0/+1
In my latest patch I missed one rcu_read_unlock(), in case device is down. Fixes: 4477138fa0ae ("tun: properly test for IFF_UP") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller24-290/+883
Daniel Borkmann says: ==================== pull-request: bpf 2019-03-16 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a umem memory leak on cleanup in AF_XDP, from Björn. 2) Fix BTF to properly resolve forward-declared enums into their corresponding full enum definition types during deduplication, from Andrii. 3) Fix libbpf to reject invalid flags in xsk_socket__create(), from Magnus. 4) Fix accessing invalid pointer returned from bpf_tcp_sock() and bpf_sk_fullsock() after bpf_sk_release() was called, from Martin. 5) Fix generation of load/store DW instructions in PPC JIT, from Naveen. 6) Various fixes in BPF helper function documentation in bpf.h UAPI header used to bpf-helpers(7) man page, from Quentin. 7) Fix segfault in BPF test_progs when prog loading failed, from Yonghong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-16net: tipc: fix a missing check of nla_nest_startKangjie Lu1-0/+3
nla_nest_start could fail and requires a check. The fix returns -EMSGSIZE if it fails. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-16net: ncsi: fix a missing check for nla_nest_startKangjie Lu1-0/+4
nla_nest_start may fail and thus deserves a check. The fix returns -EMSGSIZE in case it fails. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-16net: openvswitch: fix missing checks for nla_nest_startKangjie Lu1-0/+8
nla_nest_start may fail and thus deserves a check. The fix returns -EMSGSIZE when it fails. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-16net: openvswitch: fix a NULL pointer dereferenceKangjie Lu1-0/+4
upcall is dereferenced even when genlmsg_put fails. The fix goto out to avoid the NULL pointer dereference in this case. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.