aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2009-03-18net: kfree(napi->skb) => kfree_skbRoel Kluin1-1/+1
struct sk_buff pointers should be freed with kfree_skb. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18net: fix sctp breakageAl Viro1-1/+2
broken by commit 5e739d1752aca4e8f3e794d431503bfca3162df4; AFAICS should be -stable fodder as well... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Aced-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18ipv6: fix display of local and remote sit endpointsBjørn Mork1-1/+1
This fixes the regressions cause by commit 1326c3d5a4b792a2b15877feb7fb691f8945d203 (v2.6.28-rc6-461-g23a12b1) broke the display of local and remote addresses of an SIT tunnel in iproute2. nt->parms is used by ipip6_tunnel_init() and therefore need to be initialized first. Tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12868 Reported-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18net: Document /proc/sys/net/core/netdev_budgetStanislaw Gruszka1-0/+7
The NAPI poll parameter netdev_budget is not documented in kernel-docs. Since it may have a substantial effect on at least some network loads, it should be. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18tulip: fix crash on iface up with shirq debugKyle McMartin1-16/+29
Tulip is currently doing request_irq before it has done its initialization. This is usually not a problem because it hasn't enable interrupts yet, but with DEBUG_SHIRQ on, we call the irq handler when registering the interrupt as a sanity check. This can result in a NULL ptr dereference, so call tulip_init_ring before request_irq, and add a free_ring function to do the freeing now shared with tulip_close. Tested with a shell loop running ifup, ifdown in a loop a few hundred times with DEBUG_SHIRQ on. Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18virtio_net: Make virtio_net support carrier detectionPantelis Koukousoulas1-0/+3
Impact: Make NetworkManager work with virtio_net For now the semantics are simple: There is always carrier. This allows a seamless experience with e.g., qemu/kvm where NetworkManager just configures and sets up everything automagically. If/when a generally agreed-upon way to control carrier on/off in the emulator/hypervisor level emerges, it will be trivial to extend the driver to support that too, but for now even this 2-liner makes user experience that much better. Signed-off-by: Pantelis Koukousoulas <pktoss@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18bonding: Fix updating of speed/duplex changesJay Vosburgh1-5/+20
This patch corrects an omission from the following commit: commit f0c76d61779b153dbfb955db3f144c62d02173c2 Author: Jay Vosburgh <fubar@us.ibm.com> Date: Wed Jul 2 18:21:58 2008 -0700 bonding: refactor mii monitor The un-refactored code checked the link speed and duplex of every slave on every pass; the refactored code did not do so. The 802.3ad and balance-alb/tlb modes utilize the speed and duplex information, and require it to be kept up to date. This patch adds a notifier check to perform the appropriate updating when the slave device speed changes. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18bnx2: Fix problem of using wrong IRQ handler.Michael Chan1-6/+6
The MSI-X handler was chosen before the call to pci_enable_msix(). If MSI-X was not available, the wrong MSI-X handler would be used in INTA mode. This would cause a screaming interrupt problem because INTA would not be cleared by the MSI-X handler. Fixed by assigning MSI-X handler after pci_enable_msix() returns successfully. Also update version to 1.9.3. Thomas Chenault <thomas_chenault@dell.com> helped us find this problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds39-12237/+0
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: benet: remove driver now that it is merged in drivers/net/
2009-03-18Merge branch 'for-2.6.29' of git://linux-nfs.org/~bfields/linuxLinus Torvalds2-2/+5
* 'for-2.6.29' of git://linux-nfs.org/~bfields/linux: nfsd: nfsd should drop CAP_MKNOD for non-root NFSD: provide encode routine for OP_OPENATTR
2009-03-18Staging: benet: remove driver now that it is merged in drivers/net/Greg Kroah-Hartman39-12237/+0
The benet driver is now in the proper place in drivers/net/benet, so we can remove the staging version. Acked-by: Sathya Perla <sathyap@serverengines.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-18Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds9-840/+1069
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/ps3: ps3_defconfig updates powerpc/mm: Respect _PAGE_COHERENT on classic ppc32 SW powerpc/5200: Enable CPU_FTR_NEED_COHERENT for MPC52xx ps3/block: Replace mtd/ps3vram by block/ps3vram
2009-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds1-12/+14
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: module: fix refptr allocation and release order
2009-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds14-28/+72
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: storage: Unusual USB device Prolific 2507 variation added USB: Add device id for Option GTM380 to option driver USB: Add Vendor/Product ID for new CDMA U727 to option driver USB: Updated unusual-devs entry for USB mass storage on Nokia 6233 USB: Option: let cdc-acm handle Sony Ericsson F3507g / Dell 5530 USB: EHCI: expedite unlinks when the root hub is suspended USB: EHCI: Fix isochronous URB leak USB: option.c: add ZTE 622 modem device USB: wusbcore/wa-xfer, fix lock imbalance USB: misc/vstusb, fix lock imbalance USB: misc/adutux, fix lock imbalance USB: image/mdc800, fix lock imbalance USB: atm/cxacru, fix lock imbalance USB: unusual_devs: Add support for GI 0431 SD-Card interface USB: serial: new cp2101 device id USB: serial: ftdi: enable UART detection on gnICE JTAG adaptors blacklist interface0 USB: serial: add FTDI USB/Serial converter devices USB: usbfs: keep async URBs until the device file is closed USB: usbtmc: add protocol 1 support USB: usbtmc: fix stupid bug in open()
2009-03-18Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds6-24/+48
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Fix vunmap and free order in snd_free_sgbuf_pages() ALSA: mixart, fix lock imbalance ALSA: pcm_oss, fix locking typo ALSA: oss-mixer - Fixes recording gain control ALSA: hda - Workaround for buggy DMA position on ATI controllers ALSA: hda - Fix DMA mask for ATI controllers ALSA: opl3sa2 - Fix NULL dereference when suspending snd_opl3sa2
2009-03-18[S390] make page table upgrade work againMartin Schwidefsky2-14/+35
After TASK_SIZE now gives the current size of the address space the upgrade of a 64 bit process from 3 to 4 levels of page table needs to use the arch_mmap_check hook to catch large mmap lengths. The get_unmapped_area* functions need to check for -ENOMEM from the arch_get_unmapped_area*, upgrade the page table and retry. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-18[S390] make page table walking more robustMartin Schwidefsky3-5/+6
Make page table walking on s390 more robust. The current code requires that the pgd/pud/pmd/pte loop is only done for address ranges that are below the end address of the last vma of the address space. But this is not always true, e.g. the generic page table walker does not guarantee this. Change TASK_SIZE/TASK_SIZE_OF to reflect the current size of the address space. This makes the generic page table walker happy but it breaks the upgrade of a 3 level page table to a 4 level page table. To make the upgrade work again another fix is required. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-18[S390] Dont check for pfn_valid() in uaccess_pt.cGerald Schaefer1-18/+0
pfn_valid() actually checks for a valid struct page and not for a valid pfn. Using xip mappings w/o struct pages, this will result in -EFAULT returned by the (page table walk) user copy functions, even though there is valid memory. Those user copy functions don't need a struct page, so this patch just removes the pfn_valid() check. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-18[S390] ftrace/mcount: fix kernel stack backchainHeiko Carstens1-2/+4
With packed stack the backchain is at a different location. Just use __SF_BACKCHAIN as an offset to store the backchain. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-18[S390] topology: define SD_MC_INIT to fix performance regressionHeiko Carstens1-0/+2
The default values for SD_MC_INIT cause an additional cpu usage of up to 40% on some network benchmarks compared to the plain SD_CPU_INIT values. So just define SD_MC_INIT to SD_CPU_INIT. More tuning needs to be done. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-18[S390] __div64_31 broken for CONFIG_MARCH_G5Martin Schwidefsky1-1/+1
The implementation of __div64_31 for G5 machines is broken. The comments in __div64_31 are correct, only the code does not do what the comments say. The part "If the remainder has overflown subtract base and increase the quotient" is only partially realized, the base is subtracted correctly but the quotient is only increased if the dividend had the last bit set. Using the correct instruction fixes the problem. Cc: stable@kernel.org Reported-by: Frans Pop <elendil@planet.nl> Tested-by: Frans Pop <elendil@planet.nl> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-18Merge branch 'fix/opl3sa2-suspend' into for-linusTakashi Iwai1-6/+12
2009-03-18Merge branch 'fix/hda' into for-linusTakashi Iwai1-13/+26
2009-03-18ALSA: Fix vunmap and free order in snd_free_sgbuf_pages()Takashi Iwai1-3/+4
In snd_free_sgbuf_pags(), vunmap() is called after releasing the SG pages, and it causes errors on Xen as Xen manages the pages differently. Although no significant errors have been reported on the actual hardware, this order should be fixed other way round, first vunmap() then free pages. Cc: Jan Beulich <jbeulich@novell.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: mixart, fix lock imbalanceJiri Slaby1-0/+1
There is an omitted unlock in one snd_mixart_hw_params fail path. Fix it. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: pcm_oss, fix locking typoJiri Slaby1-2/+2
s/mutex_lock/mutex_unlock/ on 2 fail paths in snd_pcm_oss_proc_write. Probably a typo, lock should be unlocked when leaving the function. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: oss-mixer - Fixes recording gain controlViral Mehta1-0/+3
At the time of initialization, SNDRV_MIXER_OSS_PRESENT_PVOLUME bit is not set for MIC (slot 7). So, the same should not be checked when an application tries to do gain control for audio recording devices. Just check slot->present for SNDRV_MIXER_OSS_PRESENT_CVOLUME independently. Verified with a simple application which opens /dev/dsp for recording and /dev/mixer for volume control. Have tested two usb audio mic devices. Signed-off-by: Viral Mehta <viral.mehta@einfochips.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: hda - Workaround for buggy DMA position on ATI controllersTakashi Iwai1-13/+18
The position-buffer on ATI controllers are unreliable as well as on VIA chips, thus the same workaround for DMA position reading as VIA is useful for ATI. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: hda - Fix DMA mask for ATI controllersTakashi Iwai1-0/+8
ATI controllers (at least some SB0600 models) appear buggy to handle 64bit DMA. As a workaround, reset GCAP bit0 and let the driver to use only 32bit DMA on these controllers. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-17Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds3-7/+16
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix bb_prealloc_list corruption due to wrong group locking ext4: fix bogus BUG_ONs in in mballoc code ext4: Print the find_group_flex() warning only once ext4: fix header check in ext4_ext_search_right() for deep extent trees.
2009-03-18powerpc/ps3: ps3_defconfig updatesGeoff Levand1-60/+190
Update ps3_defconfig. Sets these options: CONFIG_PS3_VRAM=m CONFIG_BLK_DEV_DM=m CONFIG_USB_HIDDEV=y CONFIG_EXT4_FS=y Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-18Merge commit 'gcl/merge' into mergeBenjamin Herrenschmidt131-1835/+3138
2009-03-18module: fix refptr allocation and release orderMasami Hiramatsu1-12/+14
Impact: fix ref-after-free crash on failed module load Fix refptr bug: Change refptr allocation and release order not to access a module data structure pointed by 'mod' after freeing mod->module_core. This bug will cause kernel panic(e.g. failed to find undefined symbols). This bug was reported on systemtap bugzilla. http://sources.redhat.com/bugzilla/show_bug.cgi?id=9927 Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-17Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6David S. Miller9-5/+81
2009-03-17USB: storage: Unusual USB device Prolific 2507 variation addedThomas Bartosik1-1/+3
The "c-enter" USB to Toshiba 1.8" IDE enclosure needs special treatment to work flawlessly. This patch is absolutely trivial, as the integrated USB-IDE bridge is already identified to be an "unusual" device, only the bcdDevice is different (lower) to the bcdDeviceMin already included in the kernel. It is a Prolific 2507 bridge. T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=067b ProdID=2507 Rev= 0.01 S: Manufacturer=Prolific Technology Inc. S: Product=ATAPI-6 Bridge Controller S: SerialNumber=00000272 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Thomas Bartosik <tbartdev@gmx-topmail.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: Add device id for Option GTM380 to option driverAchilleas Kotsis1-0/+2
Option GTM380 in Modem mode uses Product ID 0x7201. This has been tested and works on production systems for over 6 months. Signed-off-by: Achilleas Kotsis <akots@exponent.gr> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: Add Vendor/Product ID for new CDMA U727 to option driverDirk Hohndel1-0/+2
* newer versions of the Novatel Wireless U727 CDMA 3G USB stick have a different Product ID (0x5010); adding this ID makes them work just fine with the option driver Signed-off-by: Dirk Hohndel <hohndel@infradead.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: Updated unusual-devs entry for USB mass storage on Nokia 6233Moritz Muehlenhoff1-1/+1
Current firmware revision 5.60 still behaves the same, so update the quirk up a (non-existing) 99.99 revision. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=493415 Signed-off-by: Moritz Muehlenhoff <jmm@debian.org> Tested-by: Jan Heitkoetter <devnull@heitkoetter.net> Cc: stable <stable@kernel.org> Signed-off-by: Phil Dibowitz <phil@ipom.com>
2009-03-17USB: Option: let cdc-acm handle Sony Ericsson F3507g / Dell 5530Dan Williams1-8/+0
The generic cdc-acm driver is now the best one to handle Sony Ericsson F3507g-based devices (which the Dell 5530 is a rebrand of), now that all the pieces are in place (ie, cac477e8f1038c41b6f29d3161ce351462ef3df7). Removing the IDs from option allows cdc-acm to handle the device. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: EHCI: expedite unlinks when the root hub is suspendedAlan Stern1-1/+2
This patch (as1225) fixes a bug in ehci-hcd. The condition for whether unlinked QHs can become IDLE should not be that the controller is halted, but rather that the controller isn't running. In other words when the root hub is suspended, the hardware doesn't own any QHs. This fixes a problem that can show up during hibernation: If a QH is only partially unlinked when the root hub is frozen, then when the root hub is thawed the QH won't be in the IDLE state. As a result it can't be used properly for new URB submissions. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Brandon Philips <brandon@ifup.org> Tested-by: Brandon Philips <brandon@ifup.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: EHCI: Fix isochronous URB leakKarsten Wiese1-6/+4
ehci-hcd uses usb_get_urb() and usb_put_urb() in an unbalanced way causing isochronous URB's kref.counts incrementing once per usb_submit_urb() call. The culprit is *usb being set to NULL when usb_put_urb() is called after URB is given back. Due to other fixes there is no need for ehci-hcd to deal with usb_get_urb() nor usb_put_urb() anymore, so patch removes their usages in ehci-hcd. Patch also makes ehci_to_hcd(ehci)->self.bandwidth_allocated adjust, if a stream finishes. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: David Brownell <david-b@pacbell.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: option.c: add ZTE 622 modem deviceAlbert Pauw1-0/+2
Please consider this small patch for the usb option-card driver. This patch adds the ZTE 622 usb modem device. Signed-off-by: Albert Pauw <albert.pauw@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: wusbcore/wa-xfer, fix lock imbalanceJiri Slaby1-1/+3
Fix locking on one wa_urb_enqueue_b's fail path. There was omitted unlock. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: misc/vstusb, fix lock imbalanceJiri Slaby1-0/+1
Make sure we don't leak locked vstdev->lock in vstusb_write. Unlock properly on one fail path. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: misc/adutux, fix lock imbalanceJiri Slaby1-3/+3
Don't unlock adutux_mutex when not held. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: image/mdc800, fix lock imbalanceJiri Slaby1-0/+1
There is an omitted unlock in mdc800_usb_probe's fail path. Add it. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Henning Zabel <henning@uni-paderborn.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: atm/cxacru, fix lock imbalanceJiri Slaby1-1/+2
We do not hold mutex in one place in cxacru_cm, but unlock it on fail path. Fix this. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Simon Arlott <cxacru@fire.lp0.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: unusual_devs: Add support for GI 0431 SD-Card interfaceJan Dumon1-0/+10
Enable the SD-Card interface on the GI 0431 HSUPA stick from Option. The unusual_devs.h entry is necessary because the device descriptor is vendor-specific. That prevents usb-storage from binding to it as an interface driver. T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 15 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=0af0 ProdID=7501 Rev= 0.00 S: Manufacturer=Option N.V. S: Product=Globetrotter HSUPA Modem C:* #Ifs=11 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 9 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=10 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jan Dumon <j.dumon@option.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: serial: new cp2101 device idRobert M. Kenney1-0/+1
From: Robert M. Kenney <rmk@unh.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: serial: ftdi: enable UART detection on gnICE JTAG adaptors blacklist interface0Michael Hennerich2-0/+9
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.