aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-11-24bnxt_en: Add support for flashing the device via devlinkVasundhara Volam3-2/+24
Use the same bnxt_flash_package_from_file() function to support devlink flash operation. Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Allow PHY settings on multi-function or NPAR PFs if allowed by FW.Michael Chan3-5/+12
Currently, the driver does not allow PHY settings on a multi-function or NPAR NIC whose port is shared by more than one function. Newer firmware now allows PHY settings on some of these NICs. Check for this new firmware setting and allow the user to set the PHY settings accordingly. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Add async. event logic for PHY configuration changes.Michael Chan2-0/+11
If the link settings have been changed by another function sharing the port, firmware will send us an async. message. In response, we will call the new bnxt_init_ethtool_link_settings() function to update the current settings. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Refactor the initialization of the ethtool link settings.Michael Chan1-20/+26
Refactor this logic in bnxt_probe_phy() into a separate function bnxt_init_ethtool_link_settings(). It used to be that the settable link settings will never be changed without going through ethtool. So we only needed to do this once in bnxt_probe_phy(). Now, another function sharing the port may change it and we may need to re-initialize the ethtool settings again in run-time. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Skip disabling autoneg before PHY loopback when appropriate.Michael Chan3-3/+10
New firmware allows PHY loopback to be set without disabling autoneg first. Check this capability and skip disabling autoneg when it is supported by firmware. Using this scheme, loopback will always work even if the PHY only supports autoneg. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Assign more RSS context resources to the VFs.Michael Chan1-2/+6
The driver currently only assignes 1 RSS context to each VF. This works for the Linux VF driver. But other drivers, such as DPDK, can make use of additional RSS contexts. Modify the code to divide up and assign RSS contexts to VFs just like other resources. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Initialize context memory to the value specified by firmware.Michael Chan2-9/+19
Some chips that need host context memory as a backing store requires the memory to be initialized to a non-zero value. Query the value from firmware and initialize the context memory accordingly. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Fix suspend/resume path on 57500 chipsVasundhara Volam1-0/+14
Driver calls HWRM_FUNC_RESET firmware call while resuming the device which clears the context memory backing store. Because of which allocating firmware resources would eventually fail. Fix it by freeing all context memory during suspend and reallocate the memory during resume. Call bnxt_hwrm_queue_qportcfg() in resume path. This firmware call is needed on the 57500 chips so that firmware will set up the proper queue mapping in relation to the context memory. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Send FUNC_RESOURCE_QCAPS command in bnxt_resume()Vasundhara Volam1-2/+10
After driver unregister, firmware is erasing the information that driver supports new resource management. Send FUNC_RESOURCE_QCAPS command to inform the firmware that driver supports new resource management while resuming from hibernation. Otherwise, we fallback to the older resource allocation scheme. Also, move driver register after sending FUNC_RESOURCE_QCAPS command to be consistent with the normal initialization sequence. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Combine 2 functions calling the same HWRM_DRV_RGTR fw command.Vasundhara Volam3-47/+35
Everytime driver registers with firmware, driver is required to register for async event notifications as well. These 2 calls are done using the same firmware command and can be combined. We are also missing the 2nd step to register for async events in the suspend/resume path and this will fix it. Prior to this, we were getting only default notifications. ULP can register for additional async events for the RDMA driver, so we add a parameter to the new function to only do step 2 when it is called from ULP. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Do driver unregister cleanup in bnxt_init_one() failure path.Vasundhara Volam2-3/+11
In the bnxt_init_one() failure path, if the driver has already called firmware to register the driver, it is not undoing the driver registration. Add this missing step to unregister for correctness, so that the firmware knows that the driver has unloaded. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Disable/enable Bus master during suspend/resume.Michael Chan1-0/+8
Disable Bus master during suspend to prevent DMAs after the device goes into D3hot state. The new 57500 devices may continue to DMA from context memory after the system goes into D3hot state. This may cause some PCIe errors on some system. Re-enable it during resume. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Add chip IDs for 57452 and 57454 chips.Michael Chan1-1/+6
Fix BNXT_CHIP_NUM_5645X() to include 57452 and 56454 chip IDs, so that these chips will be properly classified as P4 chips to take advantage of the P4 fixes and features. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24sfc: fix build without CONFIG_RFS_ACCELJakub Kicinski1-0/+2
The rfs members of struct efx_channel are under CONFIG_RFS_ACCEL. Ethtool stats which access those need to be as well. Reported-by: kbuild test robot <lkp@intel.com> Fixes: ca70bd423f10 ("sfc: add statistics for ARFS") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23hv_netvsc: make recording RSS hash depend on feature flagStephen Hemminger3-2/+4
The recording of RSS hash should be controlled by NETIF_F_RXHASH. Fixes: 1fac7ca4e63b ("hv_netvsc: record hardware hash in skb") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23net: gro: use vlan API instead of accessing directlyTonghao Zhang1-1/+1
Use vlan common api to access the vlan_tag info. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23Merge tag 'mlx5-updates-2019-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski8-93/+187
Saeed Mahameed says: ==================== mlx5-updates-2019-11-22 1) Misc Cleanups 2) Software steering support for Geneve ==================== Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23net: phylink: rename mac_link_state() op to mac_pcs_get_state()Russell King10-65/+59
Rename the mac_link_state() method to mac_pcs_get_state() to make it clear that it should be returning the MACs PCS current state, which is used for inband negotiation rather than just reading back what the MAC has been configured for. Update the documentation to explicitly mention that this is for inband. We drop the return value as well; most of phylink doesn't check the return value and it is not clear what it should do on error - instead arrange for state->link to be false. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23net: use rhashtable_lookup() instead of rhashtable_lookup_fast()Taehee Yoo4-6/+6
rhashtable_lookup_fast() internally calls rcu_read_lock() then, calls rhashtable_lookup(). So if rcu_read_lock() is already held, rhashtable_lookup() is enough. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23Merge tag 'wireless-drivers-next-2019-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-nextJakub Kicinski96-562/+2252
Kalle Valo says: ==================== wireless-drivers-next patches for v5.5 Last set of patches for v5.5. Major features here 802.11ax support for qtnfmac and airtime fairness support to mt76. And naturally smaller fixes and improvements all over. Major changes: qtnfmac * add 802.11ax support in AP mode * enable offload bridging support iwlwifi * support TX/RX antennas reporting mt76 * mt7615 smart carrier sense support * aggregation statistics via debugfs * airtime fairness (ATF) support * mt76x0 OF mac address support ==================== Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23Merge branch 'nfc-convert-from-txt-to-rst'Jakub Kicinski2-36/+39
Robert Schwebel says: ==================== here is v2 of the series converting the NFC documentation from txt to rst. Thanks to Jonathan and Dave for the input. Changes since (implicit) v1: * replace code-block by more compact :: syntax * really add the rst file to the index ==================== Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23docs: networking: nfc: change to rst formatRobert Schwebel2-0/+1
Now that the sphinx syntax has been fixed, change the document from txt to rst and add it to the index. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23docs: networking: nfc: fix code block syntaxRobert Schwebel1-8/+8
Silence this warning: Documentation/networking/nfc.rst:113: WARNING: Definition list ends without a blank line; unexpected unindent. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23docs: networking: nfc: fix bullet list syntaxRobert Schwebel1-1/+1
Fix this warning: Documentation/networking/nfc.rst:87: WARNING: Bullet list ends without a blank line; unexpected unindent. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23docs: networking: nfc: change block diagram to sphinx syntaxRobert Schwebel1-24/+25
Change the block diagram to match the sphinx syntax. This will make it possible to switch this file to rst in the future. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23docs: networking: nfc: change headlines to sphinx syntaxRobert Schwebel1-3/+4
The headlines in this file do are not in the standard kernel docu- mentation headline format. Change it, so this file can be switched to rst in the future. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23net: phy: initialise phydev speed and duplex sanelyRussell King1-2/+2
When a phydev is created, the speed and duplex are set to zero and -1 respectively, rather than using the predefined SPEED_UNKNOWN and DUPLEX_UNKNOWN constants. There is a window at initialisation time where we may report link down using the 0/-1 values. Tidy this up and use the predefined constants, so debug doesn't complain with: "Unsupported (update phy-core.c)/Unsupported (update phy-core.c)" when the speed and duplex settings are printed. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23net: phy: remove phy_ethtool_sset()Russell King3-62/+2
There are no users of phy_ethtool_sset() in the kernel anymore, and as of commit 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode"), the implementation is slightly buggy - it doesn't correctly check the masked advertising mask as it used to. Remove it, and update the phy documentation to refer to its replacement function. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23Revert "bpf: Emit audit messages upon successful prog load and unload"Jakub Kicinski4-38/+1
This commit reverts commit 91e6015b082b ("bpf: Emit audit messages upon successful prog load and unload") and its follow up commit 7599a896f2e4 ("audit: Move audit_log_task declaration under CONFIG_AUDITSYSCALL") as requested by Paul Moore. The change needs close review on linux-audit, tests etc. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22Merge branch 'sfc-ARFS-expiry-improvements'Jakub Kicinski6-41/+94
Edward Cree says: ==================== A series of changes to how we check filters for expiry, manage how much of that work to do & when, etc. Prompted by some pathological behaviour under heavy load, which was Reported-by: David Ahern <dahern@digitalocean.com> ==================== Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22sfc: do ARFS expiry work occasionally even without NAPI pollEdward Cree3-8/+12
If there's no traffic on a channel, its ARFS expiry work will never get scheduled by efx_poll() as that isn't being run. So make efx_filter_rfs_expire() reschedule itself to run after 30 seconds. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22sfc: add statistics for ARFSEdward Cree3-0/+12
Report the number of successful and failed insertions, and also the current count of filters, to aid in tuning e.g. rps_flow_cnt. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22sfc: suppress MCDI errors from ARFSEdward Cree2-6/+30
In high connection count usage, the NIC's filter table may be filled with sufficiently many ARFS filters that further insertions fail. As this does not represent a correctness issue, do not log the resulting MCDI errors. Add a debug-level message under the (by default disabled) rx_status category instead; and take the opportunity to do a little extra expiry work. Since there are now multiple workitems able to call __efx_filter_rfs_expire on a given channel, it is possible for them to race and thus pass quotas which, combined, exceed rfs_filter_count. Thus, don't WARN_ON if we loop all the way around the table with quota left over. Signed-off-by: Edward Cree <ecree@solarflare.com> Tested-by: David Ahern <dahern@digitalocean.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22sfc: change ARFS expiry mechanismEdward Cree4-32/+45
The old rfs_filters_added method for determining the quota could potentially allow the NIC to become filled with old filters, which never get tested for expiry. Instead, explicitly make expiry check work depend on the number of filters installed, and don't count checking slots without filters in as doing work. This guarantees that each filter will be checked for expiry at least once every thirty seconds (assuming the channel to which it belongs is NAPI polling actively) regardless of fill level. Signed-off-by: Edward Cree <ecree@solarflare.com> Tested-by: David Ahern <dahern@digitalocean.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueJakub Kicinski17-539/+1022
Jeff Kirsher says: ==================== This series contains updates to the ice driver only. Bruce updates the driver to store the number of functions the device has so that it won't have to compute it when setting safe mode capabilities. Adds a check to adjust the reporting of capabilities for devices with more than 4 ports, which differ for devices with less than 4 ports. Brett adds a helper function to determine if the VF is allowed to do VLAN operations based on the host's VF configuration. Also adds a new function that initializes VLAN stripping (enabled/disabled) for the VF based on the device supported capabilities. Adds a check if the vector index is valid with the respect to the number of transmit and receive queues configured when we set coalesce settings for DCB. Adds a check if the promisc_mask contains ICE_PROMISC_VLAN_RX or ICE_PROMISC_VLAN_TX so that VLAN 0 promiscuous rules to be removed. Add a helper macro for a commonly used de-reference of a pointer to &pf->dev->pdev. Jesse fixes an issue where if an invalid virtchnl request from the VF, the driver would return uninitialized data to the VF from the PF stack, so ensure the stack variable is initialized earlier. Add helpers to the virtchnl interface make the reporting of strings consistent and help reduce stack space. Implements VF statistics gathering via the kernel ndo_get_vf_stats(). Akeem ensures we disable the state flag for each VF when its resources are returned to the device. Tony does additional cleanup in the driver to ensure the when we allocate and free memory within the same function, we should not be using devm_* variants; use regular alloc and free functions. Henry implements code to query and set the number of channels on the primary VSI for a PF via ethtool. Jake cleans up needless NULL checks in ice_sched_cleanup_all(). Kevin updates the firmware API version to align with current NVM images. v2: Added "Fixes:" tag to patch 5 commit description and added the use of netif_is_rxfh_configured() in patch 13 to see if RSS has been configured by the user, if so do not overwrite that configuration. ==================== Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22net: inet_is_local_reserved_port() should return bool not intMaciej Żenczykowski1-4/+4
Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22Merge branch 'cxgb4-add-udp-segmentation-offload-support'Jakub Kicinski8-165/+218
Rahul Lakkireddy says: ==================== This series of patches add UDP Segmentation Offload (USO) supported by Chelsio T5/T6 NICs. Patch 1 updates the current Scatter Gather List (SGL) DMA unmap logic for USO requests. Patch 2 adds USO support for NIC and MQPRIO QoS offload Tx path. Patch 3 adds missing stats for MQPRIO QoS offload Tx path. ==================== Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22cxgb4: add stats for MQPRIO QoS offload Tx pathRahul Lakkireddy4-1/+28
Export necessary stats for traffic flowing through MQPRIO QoS offload Tx path. v2: - No change. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22cxgb4: add UDP segmentation offload supportRahul Lakkireddy6-50/+139
Implement and export UDP segmentation offload (USO) support for both NIC and MQPRIO QoS offload Tx path. Update appropriate logic in Tx to parse GSO info in skb and configure FW_ETH_TX_EO_WR request needed to perform USO. v2: - Remove inline keyword from write_eo_udp_wr() in sge.c. Let the compiler decide. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22cxgb4/chcr: update SGL DMA unmap for USORahul Lakkireddy4-115/+52
The FW_ETH_TX_EO_WR used for sending UDP Segmentation Offload (USO) requests expects the headers to be part of the descriptor and the payload to be part of the SGL containing the DMA mapped addresses. Hence, the DMA address in the first entry of the SGL can start after the packet headers. Currently, unmap_sgl() tries to unmap from this wrong offset, instead of the originally mapped DMA address. So, use existing unmap_skb() instead, which takes originally saved DMA addresses as input. Update all necessary Tx paths to save the original DMA addresses, so that unmap_skb() can unmap them properly. v2: - No change. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski93-302/+714
Minor conflict in drivers/s390/net/qeth_l2_main.c, kept the lock from commit c8183f548902 ("s390/qeth: fix potential deadlock on workqueue flush"), removed the code which was removed by commit 9897d583b015 ("s390/qeth: consolidate some duplicated HW cmd code"). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds50-178/+356
Pull networking fixes from David Miller: 1) Validate tunnel options length in act_tunnel_key, from Xin Long. 2) Fix DMA sync bug in gve driver, from Adi Suresh. 3) TSO kills performance on some r8169 chips due to HW issues, disable by default in that case, from Corinna Vinschen. 4) Fix clock disable mismatch in fec driver, from Chubong Yuan. 5) Fix interrupt status bits define in hns3 driver, from Huazhong Tan. 6) Fix workqueue deadlocks in qeth driver, from Julian Wiedmann. 7) Don't napi_disable() twice in r8152 driver, from Hayes Wang. 8) Fix SKB extension memory leak, from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits) r8152: avoid to call napi_disable twice MAINTAINERS: Add myself as maintainer of virtio-vsock udp: drop skb extensions before marking skb stateless net: rtnetlink: prevent underflows in do_setvfinfo() can: m_can_platform: remove unnecessary m_can_class_resume() call can: m_can_platform: set net_device structure as driver data hv_netvsc: Fix send_table offset in case of a host bug hv_netvsc: Fix offset usage in netvsc_send_table() net-ipv6: IPV6_TRANSPARENT - check NET_RAW prior to NET_ADMIN sfc: Only cancel the PPS workqueue if it exists nfc: port100: handle command failure cleanly net-sysfs: fix netdev_queue_add_kobject() breakage r8152: Re-order napi_disable in rtl8152_close net: qca_spi: Move reset_count to struct qcaspi net: qca_spi: fix receive buffer size check net/ibmvnic: Ignore H_FUNCTION return from H_EOI to tolerate XIVE mode Revert "net/ibmvnic: Fix EOI when running in XIVE mode" net/mlxfw: Verify FSM error code translation doesn't exceed array size net/mlx5: Update the list of the PCI supported devices net/mlx5: Fix auto group size calculation ...
2019-11-22afs: Fix large file supportMarc Dionne1-0/+1
By default s_maxbytes is set to MAX_NON_LFS, which limits the usable file size to 2GB, enforced by the vfs. Commit b9b1f8d5930a ("AFS: write support fixes") added support for the 64-bit fetch and store server operations, but did not change this value. As a result, attempts to write past the 2G mark result in EFBIG errors: $ dd if=/dev/zero of=foo bs=1M count=1 seek=2048 dd: error writing 'foo': File too large Set s_maxbytes to MAX_LFS_FILESIZE. Fixes: b9b1f8d5930a ("AFS: write support fixes") Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-22afs: Fix possible assert with callbacks from yfs serversMarc Dionne1-1/+0
Servers sending callback breaks to the YFS_CM_SERVICE service may send up to YFSCBMAX (1024) fids in a single RPC. Anything over AFSCBMAX (50) will cause the assert in afs_break_callbacks to trigger. Remove the assert, as the count has already been checked against the appropriate max values in afs_deliver_cb_callback and afs_deliver_yfs_cb_callback. Fixes: 35dbfba3111a ("afs: Implement the YFS cache manager service") Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-22ice: Update FW API minor versionKevin Scott1-1/+1
Update FW API minor version to align to current value advertised by FW in new NVM images. Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-11-22ice: remove pointless NULL check of port_infoJacob Keller1-2/+1
The code in ice_sched_cleanup_all checks whether the port info is NULL prior to calling ice_sched_clear_port. However, ice_sched_clear_port already checks whether port info is non-NULL. More importantly, it also checks whether the port structure has been initialized by checking its port_state field as well. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-11-22ice: Implement ethtool ops for channelsHenry Tieman7-19/+335
Add code to query and set the number of channels on the primary VSI for a PF. This is accessed from the 'ethtool -l' and 'ethtool -L' commands, respectively. Though the ice driver supports asymmetric queues report an IRQ vector that has both Rx and Tx queues attached and is counted as a 'combined' channel. Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-11-22net/mlx5e: Remove redundant pointer checkEli Cohen1-12/+10
When code reaches the "out" label, n is guaranteed to be valid so we can unconditionally call neigh_release. Also change the label to release_neigh to better reflect the fact that we unconditionally free the neighbour and also match other labels convention. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-22net/mlx5e: TC, Stub out ipv6 tun create header functionSaeed Mahameed2-4/+7
Improve mlx5e_route_lookup_ipv6 function structure by avoiding #ifdef then return -EOPNOTSUPP in the middle of the function code. To do so, we stub out mlx5e_tc_tun_create_header_ipv6 which is the only caller of this helper function to avoid calling it altogether when ipv6 is compiled out, which should also cleanup some compiler warnings of unused variables. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-22net/mlx5: DR, Add support for Geneve packets SW steeringYevgeny Kliteynik3-0/+83
Add support for SW steering matching on Geneve header fields: - VNI - OAM - protocol type - options length Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.