aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-04-23bpf, doc: update list of architectures that do eBPF JITAlexei Starovoitov1-4/+3
update the list and remove 'in the future' statement, since all still alive 64-bit architectures now do eBPF JIT. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-22bpf: Add sparc support to tools and samples.David S. Miller3-0/+24
Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net>
2017-04-22sparc64: Add eBPF JIT.David S. Miller7-60/+1424
This is an eBPF JIT for sparc64. All major features are supported. All tests under tools/testing/selftests/bpf/ pass. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-22sparc: Split BPF JIT into 32-bit and 64-bit.David S. Miller6-3/+5
This is in preparation for adding the 64-bit eBPF JIT. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller59-245/+575
Both conflict were simple overlapping changes. In the kaweth case, Eric Dumazet's skb_cow() bug fix overlapped the conversion of the driver in net-next to use in-netdev stats. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21Merge tag 'nfsd-4.11-2' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-1/+1
Pull nfsd bugfix from Bruce Fields: "Fix a 4.11 regression that triggers a BUG() on an attempt to use an unsupported NFSv4 compound op" * tag 'nfsd-4.11-2' of git://linux-nfs.org/~bfields/linux: nfsd: fix oops on unsupported operation
2017-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds25-210/+345
Pull networking fixes from David Miller: 1) Don't race in IPSEC dumps, from Yuejie Shi. 2) Verify lengths properly in IPSEC reqeusts, from Herbert Xu. 3) Fix out of bounds access in ipv6 segment routing code, from David Lebrun. 4) Don't write into the header of cloned SKBs in smsc95xx driver, from James Hughes. 5) Several other drivers have this bug too, fix them. From Eric Dumazet. 6) Fix access to uninitialized data in TC action cookie code, from Wolfgang Bumiller. 7) Fix double free in IPV6 segment routing, again from David Lebrun. 8) Don't let userspace set the RTF_PCPU flag, oops. From David Ahern. 9) Fix use after free in qrtr code, from Dan Carpenter. 10) Don't double-destroy devices in ip6mr code, from Nikolay Aleksandrov. 11) Don't pass out-of-range TX queue indices into drivers, from Tushar Dave. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits) netpoll: Check for skb->queue_mapping ip6mr: fix notification device destruction bpf, doc: update bpf maintainers entry net: qrtr: potential use after free in qrtr_sendmsg() bpf: Fix values type used in test_maps net: ipv6: RTF_PCPU should not be settable from userspace gso: Validate assumption of frag_list segementation kaweth: use skb_cow_head() to deal with cloned skbs ch9200: use skb_cow_head() to deal with cloned skbs lan78xx: use skb_cow_head() to deal with cloned skbs sr9700: use skb_cow_head() to deal with cloned skbs cx82310_eth: use skb_cow_head() to deal with cloned skbs smsc75xx: use skb_cow_head() to deal with cloned skbs ipv6: sr: fix double free of skb after handling invalid SRH MAINTAINERS: Add "B:" field for networking. net sched actions: allocate act cookie early qed: Fix issue in populating the PFC config paramters. qed: Fix possible system hang in the dcbnl-getdcbx() path. qed: Fix sending an invalid PFC error mask to MFW. qed: Fix possible error in populating max_tc field. ...
2017-04-21net: Remove NET_CORE_BUDGET_USECS from sysctl binary interface.David S. Miller2-2/+0
We are not supposed to add new entries to this thing any more. Thanks to Eric Dumazet for noticing this. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21netpoll: Check for skb->queue_mappingTushar Dave1-2/+8
Reducing real_num_tx_queues needs to be in sync with skb queue_mapping otherwise skbs with queue_mapping greater than real_num_tx_queues can be sent to the underlying driver and can result in kernel panic. One such event is running netconsole and enabling VF on the same device. Or running netconsole and changing number of tx queues via ethtool on same device. e.g. Unable to handle kernel NULL pointer dereference tsk->{mm,active_mm}->context = 0000000000001525 tsk->{mm,active_mm}->pgd = fff800130ff9a000 \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ kworker/48:1(475): Oops [#1] CPU: 48 PID: 475 Comm: kworker/48:1 Tainted: G OE 4.11.0-rc3-davem-net+ #7 Workqueue: events queue_process task: fff80013113299c0 task.stack: fff800131132c000 TSTATE: 0000004480e01600 TPC: 00000000103f9e3c TNPC: 00000000103f9e40 Y: 00000000 Tainted: G OE TPC: <ixgbe_xmit_frame_ring+0x7c/0x6c0 [ixgbe]> g0: 0000000000000000 g1: 0000000000003fff g2: 0000000000000000 g3: 0000000000000001 g4: fff80013113299c0 g5: fff8001fa6808000 g6: fff800131132c000 g7: 00000000000000c0 o0: fff8001fa760c460 o1: fff8001311329a50 o2: fff8001fa7607504 o3: 0000000000000003 o4: fff8001f96e63a40 o5: fff8001311d77ec0 sp: fff800131132f0e1 ret_pc: 000000000049ed94 RPC: <set_next_entity+0x34/0xb80> l0: 0000000000000000 l1: 0000000000000800 l2: 0000000000000000 l3: 0000000000000000 l4: 000b2aa30e34b10d l5: 0000000000000000 l6: 0000000000000000 l7: fff8001fa7605028 i0: fff80013111a8a00 i1: fff80013155a0780 i2: 0000000000000000 i3: 0000000000000000 i4: 0000000000000000 i5: 0000000000100000 i6: fff800131132f1a1 i7: 00000000103fa4b0 I7: <ixgbe_xmit_frame+0x30/0xa0 [ixgbe]> Call Trace: [00000000103fa4b0] ixgbe_xmit_frame+0x30/0xa0 [ixgbe] [0000000000998c74] netpoll_start_xmit+0xf4/0x200 [0000000000998e10] queue_process+0x90/0x160 [0000000000485fa8] process_one_work+0x188/0x480 [0000000000486410] worker_thread+0x170/0x4c0 [000000000048c6b8] kthread+0xd8/0x120 [0000000000406064] ret_from_fork+0x1c/0x2c [0000000000000000] (null) Disabling lock debugging due to kernel taint Caller[00000000103fa4b0]: ixgbe_xmit_frame+0x30/0xa0 [ixgbe] Caller[0000000000998c74]: netpoll_start_xmit+0xf4/0x200 Caller[0000000000998e10]: queue_process+0x90/0x160 Caller[0000000000485fa8]: process_one_work+0x188/0x480 Caller[0000000000486410]: worker_thread+0x170/0x4c0 Caller[000000000048c6b8]: kthread+0xd8/0x120 Caller[0000000000406064]: ret_from_fork+0x1c/0x2c Caller[0000000000000000]: (null) Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21ip6mr: fix notification device destructionNikolay Aleksandrov1-7/+6
Andrey Konovalov reported a BUG caused by the ip6mr code which is caused because we call unregister_netdevice_many for a device that is already being destroyed. In IPv4's ipmr that has been resolved by two commits long time ago by introducing the "notify" parameter to the delete function and avoiding the unregister when called from a notifier, so let's do the same for ip6mr. The trace from Andrey: ------------[ cut here ]------------ kernel BUG at net/core/dev.c:6813! invalid opcode: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 1165 Comm: kworker/u4:3 Not tainted 4.11.0-rc7+ #251 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: netns cleanup_net task: ffff880069208000 task.stack: ffff8800692d8000 RIP: 0010:rollback_registered_many+0x348/0xeb0 net/core/dev.c:6813 RSP: 0018:ffff8800692de7f0 EFLAGS: 00010297 RAX: ffff880069208000 RBX: 0000000000000002 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88006af90569 RBP: ffff8800692de9f0 R08: ffff8800692dec60 R09: 0000000000000000 R10: 0000000000000006 R11: 0000000000000000 R12: ffff88006af90070 R13: ffff8800692debf0 R14: dffffc0000000000 R15: ffff88006af90000 FS: 0000000000000000(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe7e897d870 CR3: 00000000657e7000 CR4: 00000000000006e0 Call Trace: unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many+0xc8/0x120 net/core/dev.c:7880 ip6mr_device_event+0x362/0x3f0 net/ipv6/ip6mr.c:1346 notifier_call_chain+0x145/0x2f0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1647 call_netdevice_notifiers net/core/dev.c:1663 rollback_registered_many+0x919/0xeb0 net/core/dev.c:6841 unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many net/core/dev.c:7880 default_device_exit_batch+0x4fa/0x640 net/core/dev.c:8333 ops_exit_list.isra.4+0x100/0x150 net/core/net_namespace.c:144 cleanup_net+0x5a8/0xb40 net/core/net_namespace.c:463 process_one_work+0xc04/0x1c10 kernel/workqueue.c:2097 worker_thread+0x223/0x19c0 kernel/workqueue.c:2231 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 Code: 3c 32 00 0f 85 70 0b 00 00 48 b8 00 02 00 00 00 00 ad de 49 89 47 78 e9 93 fe ff ff 49 8d 57 70 49 8d 5f 78 eb 9e e8 88 7a 14 fe <0f> 0b 48 8b 9d 28 fe ff ff e8 7a 7a 14 fe 48 b8 00 00 00 00 00 RIP: rollback_registered_many+0x348/0xeb0 RSP: ffff8800692de7f0 ---[ end trace e0b29c57e9b3292c ]--- Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21net: dsa: LAN9303: add I2C dependencyArnd Bergmann1-1/+1
With CONFIG_I2C=m and NET_DSA_SMSC_LAN9303=y, we run into a link error: drivers/base/regmap/regmap-i2c.o: In function `regmap_smbus_byte_reg_read': regmap-i2c.c:(.text.regmap_smbus_byte_reg_read+0x18): undefined reference to `i2c_smbus_read_byte_data' drivers/base/regmap/regmap-i2c.o: In function `regmap_smbus_byte_reg_write': regmap-i2c.c:(.text.regmap_smbus_byte_reg_write+0x18): undefined reference to `i2c_smbus_write_byte_data' drivers/base/regmap/regmap-i2c.o: In function `regmap_smbus_word_reg_read': regmap-i2c.c:(.text.regmap_smbus_word_reg_read+0x18): undefined reference to `i2c_smbus_read_word_data' drivers/base/regmap/regmap-i2c.o: In function `regmap_smbus_word_read_swapped': regmap-i2c.c:(.text.regmap_smbus_word_read_swapped+0x18): undefined reference to `i2c_smbus_read_word_data' drivers/base/regmap/regmap-i2c.o: In function `regmap_smbus_word_write_swapped': This adds a Kconfig dependency to avoid the broken configuration. Fixes: be4e119f9914 ("net: dsa: LAN9303: add I2C managed mode support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21Merge tag 'nfc-next-4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-nextDavid S. Miller23-1063/+289
Samuel Ortiz says: ==================== NFC 4.12 pull request This is the NFC pull request for 4.12. We have: - Improvements for the pn533 command queue handling and device registration order. - Removal of platform data for the pn544 and st21nfca drivers. - Additional device tree options to support more trf7970a hardware options. - Support for Sony's RC-S380P through the port100 driver. - Removal of the obsolte nfcwilink driver. - Headers inclusion cleanups (miscdevice.h, unaligned.h) for many drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21bonding: fix wq initialization for links created via netlinkMahesh Bandewar3-1/+7
Earlier patch 4493b81bea ("bonding: initialize work-queues during creation of bond") moved the work-queue initialization from bond_open() to bond_create(). However this caused the link those are created using netlink 'create bond option' (ip link add bondX type bond); create the new trunk without initializing work-queues. Prior to the above mentioned change, ndo_open was in both paths and things worked correctly. The consequence is visible in the report shared by Joe Stringer - I've noticed that this patch breaks bonding within namespaces if you're not careful to perform device cleanup correctly. Here's my repro script, you can run on any net-next with this patch and you'll start seeing some weird behaviour: ip netns add foo ip li add veth0 type veth peer name veth0+ netns foo ip li add veth1 type veth peer name veth1+ netns foo ip netns exec foo ip li add bond0 type bond ip netns exec foo ip li set dev veth0+ master bond0 ip netns exec foo ip li set dev veth1+ master bond0 ip netns exec foo ip addr add dev bond0 192.168.0.1/24 ip netns exec foo ip li set dev bond0 up ip li del dev veth0 ip li del dev veth1 The second to last command segfaults, last command hangs. rtnl is now permanently locked. It's not a problem if you take bond0 down before deleting veths, or delete bond0 before deleting veths. If you delete either end of the veth pair as per above, either inside or outside the namespace, it hits this problem. Here's some kernel logs: [ 1221.801610] bond0: Enslaving veth0+ as an active interface with an up link [ 1224.449581] bond0: Enslaving veth1+ as an active interface with an up link [ 1281.193863] bond0: Releasing backup interface veth0+ [ 1281.193866] bond0: the permanent HWaddr of veth0+ - 16:bf:fb:e0:b8:43 - is still in use by bond0 - set the HWaddr of veth0+ to a different address to avoid conflicts [ 1281.193867] ------------[ cut here ]------------ [ 1281.193873] WARNING: CPU: 0 PID: 2024 at kernel/workqueue.c:1511 __queue_delayed_work+0x13f/0x150 [ 1281.193873] Modules linked in: bonding veth openvswitch nf_nat_ipv6 nf_nat_ipv4 nf_nat autofs4 nfsd auth_rpcgss nfs_acl binfmt_misc nfs lockd grace sunrpc fscache ppdev vmw_balloon coretemp psmouse serio_raw vmwgfx ttm drm_kms_helper vmw_vmci netconsole parport_pc configfs drm i2c_piix4 fb_sys_fops syscopyarea sysfillrect sysimgblt shpchp mac_hid nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack libcrc32c lp parport hid_generic usbhid hid mptspi mptscsih e1000 mptbase ahci libahci [ 1281.193905] CPU: 0 PID: 2024 Comm: ip Tainted: G W 4.10.0-bisect-bond-v0.14 #37 [ 1281.193906] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 09/30/2014 [ 1281.193906] Call Trace: [ 1281.193912] dump_stack+0x63/0x89 [ 1281.193915] __warn+0xd1/0xf0 [ 1281.193917] warn_slowpath_null+0x1d/0x20 [ 1281.193918] __queue_delayed_work+0x13f/0x150 [ 1281.193920] queue_delayed_work_on+0x27/0x40 [ 1281.193929] bond_change_active_slave+0x25b/0x670 [bonding] [ 1281.193932] ? synchronize_rcu_expedited+0x27/0x30 [ 1281.193935] __bond_release_one+0x489/0x510 [bonding] [ 1281.193939] ? addrconf_notify+0x1b7/0xab0 [ 1281.193942] bond_netdev_event+0x2c5/0x2e0 [bonding] [ 1281.193944] ? netconsole_netdev_event+0x124/0x190 [netconsole] [ 1281.193947] notifier_call_chain+0x49/0x70 [ 1281.193948] raw_notifier_call_chain+0x16/0x20 [ 1281.193950] call_netdevice_notifiers_info+0x35/0x60 [ 1281.193951] rollback_registered_many+0x23b/0x3e0 [ 1281.193953] unregister_netdevice_many+0x24/0xd0 [ 1281.193955] rtnl_delete_link+0x3c/0x50 [ 1281.193956] rtnl_dellink+0x8d/0x1b0 [ 1281.193960] rtnetlink_rcv_msg+0x95/0x220 [ 1281.193962] ? __kmalloc_node_track_caller+0x35/0x280 [ 1281.193964] ? __netlink_lookup+0xf1/0x110 [ 1281.193966] ? rtnl_newlink+0x830/0x830 [ 1281.193967] netlink_rcv_skb+0xa7/0xc0 [ 1281.193969] rtnetlink_rcv+0x28/0x30 [ 1281.193970] netlink_unicast+0x15b/0x210 [ 1281.193971] netlink_sendmsg+0x319/0x390 [ 1281.193974] sock_sendmsg+0x38/0x50 [ 1281.193975] ___sys_sendmsg+0x25c/0x270 [ 1281.193978] ? mem_cgroup_commit_charge+0x76/0xf0 [ 1281.193981] ? page_add_new_anon_rmap+0x89/0xc0 [ 1281.193984] ? lru_cache_add_active_or_unevictable+0x35/0xb0 [ 1281.193985] ? __handle_mm_fault+0x4e9/0x1170 [ 1281.193987] __sys_sendmsg+0x45/0x80 [ 1281.193989] SyS_sendmsg+0x12/0x20 [ 1281.193991] do_syscall_64+0x6e/0x180 [ 1281.193993] entry_SYSCALL64_slow_path+0x25/0x25 [ 1281.193995] RIP: 0033:0x7f6ec122f5a0 [ 1281.193995] RSP: 002b:00007ffe69e89c48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1281.193997] RAX: ffffffffffffffda RBX: 00007ffe69e8dd60 RCX: 00007f6ec122f5a0 [ 1281.193997] RDX: 0000000000000000 RSI: 00007ffe69e89c90 RDI: 0000000000000003 [ 1281.193998] RBP: 00007ffe69e89c90 R08: 0000000000000000 R09: 0000000000000003 [ 1281.193999] R10: 00007ffe69e89a10 R11: 0000000000000246 R12: 0000000058f14b9f [ 1281.193999] R13: 0000000000000000 R14: 00000000006473a0 R15: 00007ffe69e8e450 [ 1281.194001] ---[ end trace 713a77486cbfbfa3 ]--- Fixes: 4493b81bea ("bonding: initialize work-queues during creation of bond") Reported-by: Joe Stringer <joe@ovn.org> Tested-by: Joe Stringer <joe@ovn.org> Signed-off-by: Mahesh Bandewar <maheshb@google.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21bpf, doc: update bpf maintainers entryDaniel Borkmann1-1/+15
Add various related files that have been missing under BPF entry covering essential parts of its infrastructure and also add myself as co-maintainer. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21net: arc_emac: switch to phy_start()/phy_stop()Alexander Kochetkov1-1/+3
Currently driver use phy_start_aneg() in arc_emac_open() to bring up PHY. But phy_start() function is more appropriate for this purposes. Besides that it call phy_start_aneg() as part of PHY startup sequence it also can correctly bring up PHY from error and suspended states. So the patch replace phy_start_aneg() to phy_start(). Also the patch add call to phy_stop() to arc_emac_stop() to allow the PHY device to be fully suspended when the interface is unused. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21net: qrtr: potential use after free in qrtr_sendmsg()Dan Carpenter1-1/+3
If skb_pad() fails then it frees the skb so we should check for errors. Fixes: bdabad3e363d ("net: Add Qualcomm IPC router") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21bpf: Fix values type used in test_mapsDavid Miller1-2/+2
Maps of per-cpu type have their value element size adjusted to 8 if it is specified smaller during various map operations. This makes test_maps as a 32-bit binary fail, in fact the kernel writes past the end of the value's array on the user's stack. To be quite honest, I think the kernel should reject creation of a per-cpu map that doesn't have a value size of at least 8 if that's what the kernel is going to silently adjust to later. If the user passed something smaller, it is a sizeof() calcualtion based upon the type they will actually use (just like in this testcase code) in later calls to the map operations. Fixes: df570f577231 ("samples/bpf: unit test for BPF_MAP_TYPE_PERCPU_ARRAY") Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org>
2017-04-21Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller26-370/+1717
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2017-04-20 This adds the basic infrastructure for IPsec hardware offloading, it creates a configuration API and adjusts the packet path. 1) Add the needed netdev features to configure IPsec offloads. 2) Add the IPsec hardware offloading API. 3) Prepare the ESP packet path for hardware offloading. 4) Add gso handlers for esp4 and esp6, this implements the software fallback for GSO packets. 5) Add xfrm replay handler functions for offloading. 6) Change ESP to use a synchronous crypto algorithm on offloading, we don't have the option for asynchronous returns when we handle IPsec at layer2. 7) Add a xfrm validate function to validate_xmit_skb. This implements the software fallback for non GSO packets. 8) Set the inner_network and inner_transport members of the SKB, as well as encapsulation, to reflect the actual positions of these headers, and removes them only once encryption is done on the payload. From Ilan Tayari. 9) Prepare the ESP GRO codepath for hardware offloading. 10) Fix incorrect null pointer check in esp6. From Colin Ian King. 11) Fix for the GSO software fallback path to detect the fallback correctly. From Ilan Tayari. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21MAINTAINERS: Add new IPsec offloading files.Steffen Klassert1-2/+2
This adds two new files to IPsec maintenance scope: net/ipv4/esp4_offload.c net/ipv6/ip6_offload.c Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller27-187/+1625
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2017-04-19 This series contains updates to i40e and i40evf only, most notable being the addition of trace points for BPF programs. Tobias Klauser updates i40evf to use net_device stats struct instead of a local private copy. Preethi updates the VF driver to not enable receive checksum offload by default for tunneled packets. Alex fixes an issue he introduced when he converted the code over to using the length field to determine if a descriptor was done or not. Mitch adds the ability to dump additional information on the VFs, which is not available through 'ip link show' using debugfs. Scott adds trace points to the drivers so that BPF programs can be attached for feature testing and verification. Jingjing adds admin queue functions for Pipeline Personalization Profile commands. Jake does most of the heavy lifting in this series, starting with the a reduction in the scope of the RTNL lock being held while resetting VFs to allow multiple PFs to reset in a timely manner. Factored out the direct queue modification so that we are able to re-use the code. Reduced the wait time for admin queue commands to complete, since we were waiting a minimum of a millisecond, when in practice the admin queue command is processed often much faster. Cleaned up code (flag) we never use. Make the code to resetting all the VFs optimized for parallel computing instead of the current way is a serialized fashion, to help reduce the time it takes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21netvsc: fix use after free on module removalstephen hemminger2-7/+11
The NAPI data structure is embedded in the netvsc_device structure and is freed when device is closed. There is still a reference (in NAPI list) to this which causes a crash in netif_napi_del when device is removed. Fix by managing NAPI instances correctly. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21Merge branch 'tc-filter-cleanup-destroy-delete'David S. Miller13-148/+134
Cong Wang says: ==================== net_sched: clean up tc filter destroy and delete logic The first patch fixes a potenial race condition, the second one is pure cleanup. ==================== Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21net_sched: remove useless NULL to tp->rootWANG Cong3-20/+0
There is no need to NULL tp->root in ->destroy(), since tp is going to be freed very soon, and existing readers are still safe to read them. For cls_route, we always init its tp->root, so it can't be NULL, we can drop more useless code. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21net_sched: move the empty tp check from ->destroy() to ->delete()WANG Cong13-128/+134
We could have a race condition where in ->classify() path we dereference tp->root and meanwhile a parallel ->destroy() makes it a NULL. Daniel cured this bug in commit d936377414fa ("net, sched: respect rcu grace period on cls destruction"). This happens when ->destroy() is called for deleting a filter to check if we are the last one in tp, this tp is still linked and visible at that time. The root cause of this problem is the semantic of ->destroy(), it does two things (for non-force case): 1) check if tp is empty 2) if tp is empty we could really destroy it and its caller, if cares, needs to check its return value to see if it is really destroyed. Therefore we can't unlink tp unless we know it is empty. As suggested by Daniel, we could actually move the test logic to ->delete() so that we can safely unlink tp after ->delete() tells us the last one is just deleted and before ->destroy(). Fixes: 1e052be69d04 ("net_sched: destroy proto tp when all filters are gone") Cc: Roi Dayan <roid@mellanox.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21net: ipv6: RTF_PCPU should not be settable from userspaceDavid Ahern2-1/+5
Andrey reported a fault in the IPv6 route code: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ #250 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff880069809600 task.stack: ffff880062dc8000 RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975 RSP: 0018:ffff880062dced30 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006 RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018 RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0 Call Trace: ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128 ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212 ... Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit set. Flags passed to the kernel are blindly copied to the allocated rt6_info by ip6_route_info_create making a newly inserted route appear as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set and expects rt->dst.from to be set - which it is not since it is not really a per-cpu copy. The subsequent call to __ip6_dst_alloc then generates the fault. Fix by checking for the flag and failing with EINVAL. Fixes: d52d3997f843f ("ipv6: Create percpu rt6_info") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21bpf: add napi_id read access to __sk_buffDaniel Borkmann4-0/+19
Add napi_id access to __sk_buff for socket filter program types, tc program types and other bpf_convert_ctx_access() users. Having access to skb->napi_id is useful for per RX queue listener siloing, f.e. in combination with SO_ATTACH_REUSEPORT_EBPF and when busy polling is used, meaning SO_REUSEPORT enabled listeners can then select the corresponding socket at SYN time already [1]. The skb is marked via skb_mark_napi_id() early in the receive path (e.g., napi_gro_receive()). Currently, sockets can only use SO_INCOMING_NAPI_ID from 6d4339028b35 ("net: Introduce SO_INCOMING_NAPI_ID") as a socket option to look up the NAPI ID associated with the queue for steering, which requires a prior sk_mark_napi_id() after the socket was looked up. Semantics for the __sk_buff napi_id access are similar, meaning if skb->napi_id is < MIN_NAPI_ID (e.g. outgoing packets using sender_cpu), then an invalid napi_id of 0 is returned to the program, otherwise a valid non-zero napi_id. [1] http://netdevconf.org/2.1/slides/apr6/dumazet-BUSY-POLLING-Netdev-2.1.pdf Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21netvsc: Deal with rescinded channels correctlyK. Y. Srinivasan1-0/+16
We will not be able to send packets over a channel that has been rescinded. Make necessary adjustments so we can properly cleanup even when the channel is rescinded. This issue can be trigerred in the NIC hot-remove path. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21Merge branch 'ibmvnic-updates-and-bug-fixes'David S. Miller2-177/+61
Nathan Fontenot says: ==================== ibmvnic: Updates and bug fixes This set of patches is a series of updates to remove some unneeded and unused code in the driver as well as bug fixes for the ibmvnic driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21ibmvnic: Remove unused bouce bufferNathan Fontenot2-57/+0
The bounce buffer is not used in the ibmvnic driver, just get rid of it. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21ibmvnic: Allocate zero-filled memory for sub crqsNathan Fontenot1-6/+3
Update the allocation of memory for the sub crq structs and their associated pages to allocate zero-filled memory. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21ibmvnic: Disable irq prior to closeBrian King1-0/+18
Add some code to call disable_irq on all the vnic interface's irqs. This fixes a crash observed when closing an active interface, as seen in the oops below when we try to access a buffer in the interrupt handler which we've already freed. Unable to handle kernel paging request for data at address 0x00000001 Faulting instruction address: 0xd000000003886824 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvnic(OEN) rpadlpar_io(X) rpaphp(X) tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag rpcsec_ Supported: No, Unsupported modules are loaded CPU: 8 PID: 0 Comm: swapper/8 Tainted: G OE NX 4.4.49-92.11-default #1 task: c00000007f990110 ti: c0000000fffa0000 task.ti: c00000007f9b8000 NIP: d000000003886824 LR: d000000003886824 CTR: c0000000007eff60 REGS: c0000000fffa3a70 TRAP: 0300 Tainted: G OE NX (4.4.49-92.11-default) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 22008042 XER: 20000008 CFAR: c000000000008468 DAR: 0000000000000001 DSISR: 40000000 SOFTE: 0 GPR00: d000000003886824 c0000000fffa3cf0 d000000003894118 0000000000000000 GPR04: 0000000000000000 0000000000000000 c000000001249da0 0000000000000000 GPR08: 000000000000000e 0000000000000000 c0000000ccb00000 d000000003889180 GPR12: c0000000007eff60 c000000007af4c00 0000000000000001 c0000000010def30 GPR16: c00000007f9b8000 c000000000b98c30 c00000007f9b8080 c000000000bab858 GPR20: 0000000000000005 0000000000000000 c0000000ff5d7e80 c0000000f809f648 GPR24: c0000000ff5d7ec8 0000000000000000 0000000000000000 c0000000ccb001a0 GPR28: 000000000000000a c0000000f809f600 c0000000fd4cd900 c0000000f9cd5b00 NIP [d000000003886824] ibmvnic_interrupt_tx+0x114/0x380 [ibmvnic] LR [d000000003886824] ibmvnic_interrupt_tx+0x114/0x380 [ibmvnic] Call Trace: [c0000000fffa3cf0] [d000000003886824] ibmvnic_interrupt_tx+0x114/0x380 [ibmvnic] (unreliable) [c0000000fffa3dd0] [c000000000132940] __handle_irq_event_percpu+0x90/0x2e0 [c0000000fffa3e90] [c000000000132bcc] handle_irq_event_percpu+0x3c/0x90 [c0000000fffa3ed0] [c000000000132c88] handle_irq_event+0x68/0xc0 [c0000000fffa3f00] [c000000000137edc] handle_fasteoi_irq+0xec/0x250 [c0000000fffa3f30] [c000000000131b04] generic_handle_irq+0x54/0x80 [c0000000fffa3f60] [c000000000011190] __do_irq+0x80/0x1d0 [c0000000fffa3f90] [c0000000000248d8] call_do_irq+0x14/0x24 [c00000007f9bb9e0] [c000000000011380] do_IRQ+0xa0/0x120 [c00000007f9bba40] [c000000000002594] hardware_interrupt_common+0x114/0x180 Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21ibmvnic: Correct crq and resource releasingNathan Fontenot1-3/+6
We should not be releasing the crq's when calling close for the adapter, these need to remain open to facilitate operations such as updating the mac address. The crq's should be released in the adpaters remove routine. Additionally, we need to call release_reources from remove. This corrects the scenario of trying to remove an adapter that has only been probed. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21ibmvnic: Remove inflight listNathan Fontenot2-88/+19
The inflight list used to track memory that is allocated for crq that are inflight is not needed. The one piece of the inflight list that does need to be cleaned at module exit is the error buffer list which is already attached to the adapter struct. This patch removes the inflight list and moves checking the error buffer list to ibmvnic_remove. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21ibmvnic: Do not disable IRQ after scheduling taskletBrian King1-19/+6
Since the primary CRQ is only used for service functions and not in the performance path, simplify the code a bit and avoid disabling the IRQ. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21ibmvnic: Fixup atomic API usageBrian King1-6/+4
Replace a couple of modifications of an atomic followed by a read of the atomic, which is no longer atomic, to use atomic_XX_return variants to avoid race conditions. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21ibmvnic: Unmap longer term buffer before freeBrian King1-1/+1
Make sure we unregister long term buffers from the adapter prior to DMA unmapping it and freeing the buffer. Failure to do so could result in a DMA to a now invalid address. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21ibmvnic: Fix ibmvnic_change_mac_addr struct formatMurilo Fossa Vicentini2-3/+4
The ibmvnic_change_mac_addr struct alignment was not matching the defined format in PAPR+, it had the reserved and return code fields swapped. As a consequence, the CHANGE_MAC_ADDR_RSP commands were being improperly handled and executed even when the operation wasn't successfully completed by the system firmware. Also changing the endianness of the debug message to make it easier to parse the CRQ content. Signed-off-by: Murilo Fossa Vicentini <muvic@linux.vnet.ibm.com> Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21ibmvnic: Report errors when failing to release sub-crqsThomas Falcon1-0/+6
Add reporting of errors when releasing sub-crqs fails. Signed-off-by: Thomas Falcon <tlfalcon@us.ibm.com> Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21gso: Validate assumption of frag_list segementationIlan Tayari1-4/+14
Commit 07b26c9454a2 ("gso: Support partial splitting at the frag_list pointer") assumes that all SKBs in a frag_list (except maybe the last one) contain the same amount of GSO payload. This assumption is not always correct, resulting in the following warning message in the log: skb_segment: too many frags For example, mlx5 driver in Striding RQ mode creates some RX SKBs with one frag, and some with 2 frags. After GRO, the frag_list SKBs end up having different amounts of payload. If this frag_list SKB is then forwarded, the aforementioned assumption is violated. Validate the assumption, and fall back to software GSO if it not true. Change-Id: Ia03983f4a47b6534dd987d7a2aad96d54d46d212 Fixes: 07b26c9454a2 ("gso: Support partial splitting at the frag_list pointer") Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21liquidio: remove unnecessary variable assignmentArnd Bergmann1-2/+0
gcc points out an useless assignment that was added during code refactoring: drivers/net/ethernet/cavium/liquidio/lio_ethtool.c: In function 'octnet_intrmod_callback': drivers/net/ethernet/cavium/liquidio/lio_ethtool.c:1315:59: error: parameter 'oct_dev' set but not used [-Werror=unused-but-set-parameter] This is harmless but can clearly be remove to avoid the warning. Fixes: 50c0add534d2 ("liquidio: refactor interrupt moderation code") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21Merge branch 'skb_cow_head'David S. Miller6-44/+16
Eric Dumazet says: ==================== net: use skb_cow_head() to deal with cloned skbs James Hughes found an issue with smsc95xx driver. Same problematic code is found in other drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21kaweth: use skb_cow_head() to deal with cloned skbsEric Dumazet1-12/+6
We can use skb_cow_head() to properly deal with clones, especially the ones coming from TCP stack that allow their head being modified. This avoids a copy. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21ch9200: use skb_cow_head() to deal with cloned skbsEric Dumazet1-7/+2
We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: 4a476bd6d1d9 ("usbnet: New driver for QinHeng CH9200 devices") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21lan78xx: use skb_cow_head() to deal with cloned skbsEric Dumazet1-7/+2
We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Cc: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21sr9700: use skb_cow_head() to deal with cloned skbsEric Dumazet1-7/+2
We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: c9b37458e956 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21cx82310_eth: use skb_cow_head() to deal with cloned skbsEric Dumazet1-5/+2
We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: cc28a20e77b2 ("introduce cx82310_eth: Conexant CX82310-based ADSL router USB ethernet driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21smsc75xx: use skb_cow_head() to deal with cloned skbsEric Dumazet1-6/+2
We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuningMatthew Whitehead6-2/+24
Constants used for tuning are generally a bad idea, especially as hardware changes over time. Replace the constant 2 jiffies with sysctl variable netdev_budget_usecs to enable sysadmins to tune the softirq processing. Also document the variable. For example, a very fast machine might tune this to 1000 microseconds, while my regression testing 486DX-25 needs it to be 4000 microseconds on a nearly idle network to prevent time_squeeze from being incremented. Version 2: changed jiffies to microseconds for predictable units. Signed-off-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21Merge branch 'iptunnel-policy-based-routing'David S. Miller11-47/+134
Craig Gallek says: ==================== ip_tunnel: Allow policy-based routing through tunnels iproute2 changes to follow. Example usage: ip link add gre-test type gre local 10.0.0.1 remote 10.0.0.2 fwmark 0x4 ip -detail link show gre-test ... ip link set gre-test type gre fwmark 0 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21ip_tunnel: Allow policy-based routing through tunnelsCraig Gallek6-44/+93
This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.