aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-01-19net: ipv4: netconf: perform strict checks also for doit handlersJakub Kicinski1-4/+39
Make RTM_GETNETCONF's doit handler use strict checks when NETLINK_F_STRICT_CHK is set. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19net: namespace: perform strict checks also for doit handlersJakub Kicinski1-2/+36
Make RTM_GETNSID's doit handler use strict checks when NETLINK_F_STRICT_CHK is set. v2: - don't check size >= sizeof(struct rtgenmsg) (Nicolas). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19rtnetlink: ifinfo: perform strict checks also for doit handlerJakub Kicinski1-1/+48
Make RTM_GETLINK's doit handler use strict checks when NETLINK_F_STRICT_CHK is set. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19rtnetlink: stats: reject requests for unknown statsJakub Kicinski1-0/+4
In the spirit of strict checks reject requests of stats the kernel does not support when NETLINK_F_STRICT_CHK is set. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19rtnetlink: stats: validate attributes in get as well as dumpsJakub Kicinski1-21/+37
Make sure NETLINK_GET_STRICT_CHK influences both GETSTATS doit as well as the dump. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19net: netlink: add helper to retrieve NETLINK_F_STRICT_CHKJakub Kicinski2-0/+9
Dumps can read state of the NETLINK_F_STRICT_CHK flag from a field in the callback structure. For non-dump GET requests we need a way to access the state of that flag from a socket. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19virtio-net: per-queue RPS configWillem de Bruijn1-0/+1
On multiqueue network devices, RPS maps are configured independently for each receive queue through /sys/class/net/$DEV/queues/rx-*. On virtio-net currently all packets use the map from rx-0, because the real rx queue is not known at time of map lookup by get_rps_cpu. Call skb_record_rx_queue in the driver rx path to make lookup work. Recording the receive queue has ramifications beyond RPS, such as in sticky load balancing decisions for sockets (skb_tx_hash) and XPS. Reported-by: Mark Hlady <mhlady@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19sch_api: Change signature of qdisc_tree_reduce_backlog() to use intsToke Høiland-Jørgensen2-4/+2
There are now several places where qdisc_tree_reduce_backlog() is called with a negative number of packets (to signal an increase in number of packets in the queue). Rather than rely on overflow behaviour, change the function signature to use signed integers to communicate this usage to people reading the code. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18Merge branch 'hns3-fixes'David S. Miller9-200/+166
Huazhong Tan says: ==================== net: hns3: code optimizations & bugfixes for HNS3 driver This patchset includes bugfixes and code optimizations for the HNS3 ethernet controller driver ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: add HNAE3_RESTORE_CLIENT interface in enet moduleYunsheng Lin4-28/+40
The HNAE3_INIT_CLIENT interface is also used when changing tc configuration, vlan/mac hardware table does not need to be restored when tc configuration changes. This patch adds a HNAE3_RESTORE_CLIENT interface to restore the vlan/mac hardware table when resetting. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: do reinitialization while ETS configuration changedHuazhong Tan4-15/+22
When the ETS information is changed, the network device needs to be re-initialized, otherwise the information such as the receiving queue will be incorrect. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: fix wrong combined count returned by ethtool -lHuazhong Tan1-4/+3
The current code returns the number of all queues that can be used and the number of queues that have been allocated, which is incorrect. What should be returned is the number of queues allocated for each enabled TC and the number of queues that can be allocated. This patch fixes it. Fixes: 482d2e9c1cc7 ("net: hns3: add support to query tqps number") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: adjust the use of alloc_tqps and num_tqpsHuazhong Tan1-3/+7
The alloc_tqps field of struct hclge_vport represents the total number of tqps allocated to the vport. The num_tqps of struct hnae3_knic_private_info indicates the total number of all enabled tqps, which needs to be distinguished during use. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: fix user configuration loss for ethtool -LHuazhong Tan4-49/+47
Ethtool -L option with the combined parameter is for changing the number of multi-purpose channels of the specified network device. Under the current scheme, the user configuration information will be lost after the reset or TC information changed. This patch fixes this issue. By default, this configuration is set to the minimum between the number of queues for each enabled TCs and the maximum number support available in the hardware. When there is a user configuration, regardless of the reset or TC information change, it should keep the user's configuration while it is under the hardware limits, otherwise set to the maximum number support available in the hardware. Fixes: 09f2af6405b8 ("net: hns3: add support to modify tqps number") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: remove redundant codes in hclge_knic_setupHuazhong Tan2-17/+2
The TC info will be updated in hclge_tm_vport_tc_info_update(), so hclge_knic_setup() no need to do it again. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: modify parameter checks in the hns3_set_channelsHuazhong Tan1-4/+3
The number of queues for each enabled TC should range from 1 to the maximum available value, and return directly if the value is same as the current one. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: add interface hclge_tm_bp_setupHuazhong Tan1-8/+15
Provide a common interface to complete the back pressure settings of all enabled TCs. So other functions directly call this interface to complete the corresponding operation. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: reuse reinitialization interface in the hns3_set_channelsHuazhong Tan1-63/+12
There is already common interface for network device reinitialization, so hns3_set_channels() should just call them. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: remove unnecessary hns3_adjust_tqps_numHuazhong Tan1-6/+0
The parameter passed to hns3_set_channels() are already the number of queues per channel of the enabled TC, so it is not need to divide the number of enabled TCs. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: remove unused member in struct hns3_enet_ringHuazhong Tan2-2/+0
The irq_init_flag field in struct hns3_enet_ring is unnecessary. This patch removes it. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: modify enet reinitialization interfaceHuazhong Tan1-2/+16
hns3_reset_notify_init_enet and hns3_reset_notify_uninit_enet are the reinitialization interface that will be called when the device reset, the number of TC changed, or the queue length changed. So these two function should call hns3_get_ring_config() and hns3_put_ring_config() to allocate and free memory for the ring with the correct number. Also this patch fixes a double free problem when hns3_reset_notify_uninit_enet calling hns3_nic_dealloc_vector_data Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18Merge branch 'Devlink-health-reporting-and-recovery-system'David S. Miller11-169/+1782
Eran Ben Elisha says: ==================== Devlink health reporting and recovery system The health mechanism is targeted for Real Time Alerting, in order to know when something bad had happened to a PCI device - Provide alert debug information - Self healing - If problem needs vendor support, provide a way to gather all needed debugging information. The main idea is to unify and centralize driver health reports in the generic devlink instance and allow the user to set different attributes of the health reporting and recovery procedures. The devlink health reporter: Device driver creates a "health reporter" per each error/health type. Error/Health type can be a known/generic (eg pci error, fw error, rx/tx error) or unknown (driver specific). For each registered health reporter a driver can issue error/health reports asynchronously. All health reports handling is done by devlink. Device driver can provide specific callbacks for each "health reporter", e.g. - Recovery procedures - Diagnostics and object dump procedures - OOB initial attributes Different parts of the driver can register different types of health reporters with different handlers. Once an error is reported, devlink health will do the following actions: * A log is being send to the kernel trace events buffer * Health status and statistics are being updated for the reporter instance * Object dump is being taken and saved at the reporter instance (as long as there is no other dump which is already stored) * Auto recovery attempt is being done. Depends on: - Auto-recovery configuration - Grace period vs. time passed since last recover The user interface: User can access/change each reporter attributes and driver specific callbacks via devlink, e.g per error type (per health reporter) - Configure reporter's generic attributes (like: Disable/enable auto recovery) - Invoke recovery procedure - Run diagnostics - Object dump The devlink health interface (via netlink): DEVLINK_CMD_HEALTH_REPORTER_GET Retrieves status and configuration info per DEV and reporter. DEVLINK_CMD_HEALTH_REPORTER_SET Allows reporter-related configuration setting. DEVLINK_CMD_HEALTH_REPORTER_RECOVER Triggers a reporter's recovery procedure. DEVLINK_CMD_HEALTH_REPORTER_DIAGNOSE Retrieves diagnostics data from a reporter on a device. DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET Retrieves the last stored dump. Devlink health saves a single dump. If an dump is not already stored by the devlink for this reporter, devlink generates a new dump. dump output is defined by the reporter. DEVLINK_CMD_HEALTH_REPORTER_DUMP_CLEAR Clears the last saved dump file for the specified reporter. netlink +--------------------------+ | | | + | | | | +--------------------------+ |request for ops |(diagnose, mlx5_core devlink |recover, |dump) +--------+ +--------------------------+ | | | reporter| | | | | +---------v----------+ | | | ops execution | | | | | <----------------------------------+ | | | | | | | | | | | + ^------------------+ | | | | | request for ops | | | | | (recover, dump) | | | | | | | | | +-+------------------+ | | | health report | | health handler | | | +-------------------------------> | | | | | +--------------------+ | | | health reporter create | | | +----------------------------> | +--------+ +--------------------------+ In this patchset, mlx5e TX reporter is implemented. v2: - Remove FW* reporters to decrease the amount of patches in the patchset ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18devlink: Add Documentation/networking/devlink-health.txtAya Levin1-0/+86
This patch adds a new file to add information about devlink health mechanism. Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net/mlx5e: Add TX timeout support for mlx5e TX reporterEran Ben Elisha3-44/+43
With this patch, ndo_tx_timeout callback will be redirected to the TX reporter in order to detect a TX timeout error and report it to the devlink health. (The watchdog detects TX timeouts, but the driver verify the issue still exists before launching any recover method). In addition, recover from TX timeout in case of lost interrupt was added to the TX reporter recover method. The TX timeout recover from lost interrupt is not a new feature in the driver, this patch re-organize the functionality and move it to the TX reporter recovery flow. TX timeout example: (with auto_recover set to false, if set to true, the manual recover and diagnose sections are irrelevant) $cat /sys/kernel/debug/tracing/trace ... devlink_health_report: bus_name=pci dev_name=0000:00:09.0 driver_name=mlx5_core reporter_name=TX: TX timeout on queue: 0, SQ: 0xd8a, CQ: 0x406, SQ Cons: 0x2 SQ Prod: 0x2, usecs since last trans: 13972000 $devlink health diagnose pci/0000:00:09 reporter TX SQ 0xd8a: HW state: 1, stopped: 1 SQ 0xe44: HW state: 1, stopped: 0 SQ 0xeb4: HW state: 1, stopped: 0 SQ 0xf1f: HW state: 1, stopped: 0 SQ 0xf80: HW state: 1, stopped: 0 SQ 0xfe5: HW state: 1, stopped: 0 $devlink health recover pci/0000:00:09 reporter TX $devlink health show pci/0000:00:09.0: name TX state healthy #err 1 #recover 1 last_dump_ts N/A dump_available false attributes: grace_period 500 auto_recover false Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net/mlx5e: Add TX reporter supportEran Ben Elisha6-125/+367
Add mlx5e tx reporter to devlink health reporters. This reporter will be responsible for diagnosing, reporting and recovering of TX errors. This patch declares the TX reporter operations and allocate it using the devlink health API. Currently, this reporter supports reporting and recovering from send error CQE only. In addition, it adds diagnose information for the open SQs. For a local SQ recover (due to driver error report), in case of SQ recover failure, the recover operation will be considered as a failure. For a full TX recover, an attempt to close and open the channels will be done. If this one passed successfully, it will be considered as a successful recover. The SQ recover from error CQE flow is not a new feature in the driver, this patch re-organize the functions and adapt them for the devlink health API. For this purpose, move code from en_main.c to a new file named reporter_tx.c. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18devlink: Add health dump {get,clear} commandsEran Ben Elisha2-0/+77
Add devlink health dump commands, in order to run an dump operation over a specific reporter. The supported operations are dump_get in order to get last saved dump (if not exist, dump now) and dump_clear to clear last saved dump. It is expected from driver's callback for diagnose command to fill it via the buffer descriptors API. Devlink will parse it and convert it to netlink nla API in order to pass it to the user. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18devlink: Add health diagnose commandEran Ben Elisha2-0/+52
Add devlink health diagnose command, in order to run a diagnose operation over a specific reporter. It is expected from driver's callback for diagnose command to fill it via the buffer descriptors API. Devlink will parse it and convert it to netlink nla API in order to pass it to the user. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18devlink: Add health recover commandEran Ben Elisha2-0/+21
Add devlink health recover command to the uapi, in order to allow the user to execute a recover operation over a specific reporter. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18devlink: Add health set commandEran Ben Elisha2-0/+37
Add devlink health set command, in order to set configuration parameters for a specific reporter. Supported parameters are: - graceful_period: Time interval between auto recoveries (in msec) - auto_recover: Determines if the devlink shall execute recover upon receiving error for the reporter Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18devlink: Add health get commandEran Ben Elisha2-0/+164
Add devlink health get command to provide reporter/s data for user space. Add the ability to get data per reporter or dump data from all available reporters. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18devlink: Add health report functionalityEran Ben Elisha3-0/+164
Upon error discover, every driver can report it to the devlink health mechanism via devlink_health_report function, using the appropriate reporter registered to it. Driver can pass error specific context which will be delivered to it as part of the dump / recovery callbacks. Once an error is reported, devlink health will do the following actions: * A log is being send to the kernel trace events buffer * Health status and statistics are being updated for the reporter instance * Object dump is being taken and stored at the reporter instance (as long as there is no other dump which is already stored) * Auto recovery attempt is being done. depends on: - Auto Recovery configuration - Grace period vs. time since last recover Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18devlink: Add health reporter create/destroy functionalityEran Ben Elisha2-0/+186
Devlink health reporter is an instance for reporting, diagnosing and recovering from run time errors discovered by the reporters. Define it's data structure and supported operations. In addition, expose devlink API to create and destroy a reporter. Each devlink instance will hold it's own reporters list. As part of the allocation, driver shall provide a set of callbacks which will be used the devlink in order to handle health reports and user commands related to this reporter. In addition, driver is entitled to provide some priv pointer, which can be fetched from the reporter by devlink_health_reporter_priv function. For each reporter, devlink will hold a metadata of statistics, buffers and status. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18devlink: Add health buffer supportEran Ben Elisha3-0/+585
Devlink health buffer is a mechanism to pass descriptors between drivers and devlink. The API allows the driver to add objects, object pair, value array (nested attributes), value and name. Driver can use this API to fill the buffers in a format which can be translated by the devlink to the netlink message. In order to fulfill it, an internal buffer descriptor is defined. This will hold the data and metadata per each attribute and by used to pass actual commands to the netlink. This mechanism will be later used in devlink health for dump and diagnose data store by the drivers. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net_sched: add hit counter for matchallCong Wang2-0/+30
Although matchall always matches packets, however, it still relies on a protocol match first. So it is still useful to have such a counter for matchall. Of course, unlike u32, every time we hit a matchall filter, it is always a success, so we don't have to distinguish them. Sample output: filter protocol 802.1Q pref 100 matchall chain 0 filter protocol 802.1Q pref 100 matchall chain 0 handle 0x1 not_in_hw (rule hit 10) action order 1: vlan pop continue index 1 ref 1 bind 1 installed 40 sec used 1 sec Action statistics: Sent 836 bytes 10 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 Reported-by: Martin Olsson <martin.olsson+netdev@sentorsecurity.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18Merge branch 'phy-improve-stopping-PHY'David S. Miller3-21/+5
Heiner Kallweit says: ==================== net: phy: improve stopping PHY This patchset improves and simplifies stopping the PHY. Heiner Kallweit (3): net: phy: stop PHY if needed when entering phy_disconnect net: phy: ensure phylib state machine is stopped after calling phy_stop net: phy: remove phy_stop_interrupts v2: - break down the patch to a patchset v3: - don't warn if driver didn't call phy_stop before phy_disconnect ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: phy: remove phy_stop_interruptsHeiner Kallweit3-20/+2
Interrupts have been disabled in phy_stop() already. So we can remove phy_stop_interrupts() and free the interrupt in phy_disconnect() directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: phy: ensure phylib state machine is stopped after calling phy_stopHeiner Kallweit2-2/+1
The call to the phylib state machine in phy_stop() just ensures that the state machine isn't re-triggered, but a state machine call may be scheduled already. So lets's call phy_stop_machine(). This also allows to get rid of the call to phy_stop_machine() in phy_disconnect(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: phy: stop PHY if needed when entering phy_disconnectHeiner Kallweit1-0/+3
Stop PHY if needed when entering phy_disconnect. This allows drivers that don't need a separate call to phy_stop() to omit this call. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18tcp: declare tcp_mmap() only when CONFIG_MMU is setYafang Shao1-0/+2
Since tcp_mmap() is defined when CONFIG_MMU is set. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: jme: fix indentation issuesColin Ian King1-3/+2
There are two lines that have indentation issues, fix these. Also remove an empty line. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: vxge: fix indentation issueColin Ian King1-1/+1
There is a goto statement that indented too deeply, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: phy: improve get_phy_idHeiner Kallweit1-9/+2
Only caller of get_phy_id() is get_phy_device(). There a PHY ID of 0xffffffff is translated back to -ENODEV. So we can avoid some overhead by returning -ENODEV directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: phy: remove state PHY_CHANGELINKHeiner Kallweit2-8/+0
Since recent changes to the phylib state machine state PHY_CHANGELINK isn't used any longer. Therefore let's remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: ip6_gre: remove gre_hdr_len from ip6erspan_rcvLorenzo Bianconi1-2/+2
Remove gre_hdr_len from ip6erspan_rcv routine signature since it is not longer used Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17Merge branch 'tcp_openreq_child'David S. Miller2-35/+20
Eric Dumazet says: ==================== tcp: remove code from tcp_create_openreq_child() tcp_create_openreq_child() is essentially cloning a listener, then must initialize some fields that can not be inherited. Listeners are either fresh sockets, or sockets that came through tcp_disconnect() after a session that dirtied many fields. By moving code to tcp_disconnect(), we can shorten time taken to create a clone, since tcp_disconnect() operation is very unlikely. ==================== Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17tcp: move rx_opt & syn_data_acked init to tcp_disconnect()Eric Dumazet2-6/+4
If we make sure all listeners have these fields cleared, then a clone will also inherit zero values. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17tcp: move tp->rack init to tcp_disconnect()Eric Dumazet2-6/+6
If we make sure all listeners have proper tp->rack value, then a clone will also inherit proper initial value. Note that fresh sockets init tp->rack from tcp_init_sock() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17tcp: move app_limited init to tcp_disconnect()Eric Dumazet2-3/+3
If we make sure all listeners have app_limited set to ~0U, then a clone will also inherit proper initial value. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17tcp: move retrans_out, sacked_out, tlp_high_seq, last_oow_ack_time init to tcp_disconnect()Eric Dumazet2-4/+4
If we make sure all listeners have these fields cleared, then a clone will also inherit zero values. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17tcp: do not clear urg_data in tcp_create_openreq_childEric Dumazet1-2/+0
All listeners have this field cleared already, since tcp_disconnect() clears it and newly created sockets have also a zero value here. So a clone will inherit a zero value here. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.