| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Introduce a new nested netlink attribute, NFTA_SET_DESC_CONCAT, used
to specify the length of each field in a set concatenation.
This allows set implementations to support concatenation of multiple
ranged items, as they can divide the input key into matching data for
every single field. Such set implementations would be selected as
they specify support for NFT_SET_INTERVAL and allow desc->field_count
to be greater than one. Explicitly disallow this for nft_set_rbtree.
In order to specify the interval for a set entry, userspace would
include in NFTA_SET_DESC_CONCAT attributes field lengths, and pass
range endpoints as two separate keys, represented by attributes
NFTA_SET_ELEM_KEY and NFTA_SET_ELEM_KEY_END.
While at it, export the number of 32-bit registers available for
packet matching, as nftables will need this to know the maximum
number of field lengths that can be specified.
For example, "packets with an IPv4 address between 192.0.2.0 and
192.0.2.42, with destination port between 22 and 25", can be
expressed as two concatenated elements:
NFTA_SET_ELEM_KEY: 192.0.2.0 . 22
NFTA_SET_ELEM_KEY_END: 192.0.2.42 . 25
and NFTA_SET_DESC_CONCAT attribute would contain:
NFTA_LIST_ELEM
NFTA_SET_FIELD_LEN: 4
NFTA_LIST_ELEM
NFTA_SET_FIELD_LEN: 2
v4: No changes
v3: Complete rework, NFTA_SET_DESC_CONCAT instead of NFTA_SET_SUBKEY
v2: No changes
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add NFTA_SET_ELEM_KEY_END attribute to convey the closing element of the
interval between kernel and userspace.
This patch also adds the NFT_SET_EXT_KEY_END extension to store the
closing element value in this interval.
v4: No changes
v3: New patch
[sbrivio: refactor error paths and labels; add corresponding
nft_set_ext_type for new key; rebase]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add helper function to parse the set element key netlink attribute.
v4: No changes
v3: New patch
[sbrivio: refactor error paths and labels; use NFT_DATA_VALUE_MAXLEN
instead of sizeof(*key) in helper, value can be longer than that;
rebase]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Using IPv6 flow-label to swiftly route around avoid congested or
disconnected network path can greatly improve TCP reliability.
This patch adds SNMP counters and a OPT_STATS counter to track both
host-level and connection-level statistics. Network administrators
can use these counters to evaluate the impact of this new ability better.
Export count for rehash attempts to
1) two SNMP counters: TcpTimeoutRehash (rehash due to timeouts),
and TcpDuplicateDataRehash (rehash due to receiving duplicate
packets)
2) Timestamping API SOF_TIMESTAMPING_OPT_STATS.
Signed-off-by: Abdul Kabbani <akabbani@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Kevin(Yudong) Yang <yyd@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Julian Wiedmann says:
====================
s390/qeth: updates 2020-01-25
please apply the following patch series for qeth to your net-next tree.
This brings a number of cleanups for the init/teardown code paths.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
qeth_l?_stop_card() is _never_ called while in HARDSETUP state, and
there's no other usage of the card state that relies on the
DOWN -> HARDSETUP -> SOFTSETUP transition.
As related cleanup, remove the check in qeth_realloc_buffer_pool() as it
is already done by the callers.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When data is received on the READ channel, the matching logic for cmds
that are waiting for a reply is currently hard-coded into the channel's
main IO callback.
Move this into a per-cmd callback, so that we can apply custom matching
logic for each individual cmd.
This also allows us to remove the coarse-grained check for unexpected
non-IPA replies, since they will no longer match against _all_ pending
cmds.
Note that IDX cmds use _no_ matcher, since their reply is synchronously
received as part of the cmd's IO.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Large parts of the online/offline code are identical now, and cleaning
up the remaining stuff is easier with a shared core.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move some duplicated logic into a shared code path.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
qeth_l2_setup_bridgeport_attrs() is entirely unrelated to sysfs
functionality, move it where it belongs.
While at it merge all the bridgeport-specific code in the set-online
path together.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jeff Kirsher says:
====================
100GbE Intel Wired LAN Driver Updates 2020-01-25
This series contains updates to the ice driver to add support for RSS.
Henry and Tony enable the driver to write the filtering hardware tables
to allow for changing of RSS rules, also introduced and initialized the
structures for storing the configuration. Then followed it up by
creating an extraction sequence based on the packet header protocols to
be programmed. Next was storing the TCAM entry with the profile data
and VSI group in the respective software structures.
Md Fahad sets up the configuration to support RSS tables for the virtual
function (VF) driver (iavf). Add support for flow types TCP4, TCP6,
UDP4, UDP6, SCTP4 and SCTP6 for RSS via ethtool.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Minor conflict in mlx5 because changes happened to code that has
moved meanwhile.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bump version to 0.8.2-k
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Provide support to change or retrieve RSS hash options for a flow type.
The supported flow-types are: tcp4, tcp6, udp4, udp6, sctp4, sctp6.
Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Set configuration for hardware RSS tables for VFs.
Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Attempt to optimize TCAM entries and reduce table resource usage by
searching for profiles that can be reused. Provide resource cleanup
of both hardware and software structures.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Write the hardware tables based on the populated software structures.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Store the TCAM entry with the profile data and the VSI group in the
respective SW structures. This will be subsequently used to write out
the tables to hardware.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Pull ARM fixes from Russell King:
- fix ftrace relocation type filtering
- relax arch timer version check
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8955/1: virt: Relax arch timer version check during early boot
ARM: 8950/1: ftrace/recordmcount: filter relocation types
|
|
Pull networking fixes from David Miller:
1) Off by one in mt76 airtime calculation, from Dan Carpenter.
2) Fix TLV fragment allocation loop condition in iwlwifi, from Luca
Coelho.
3) Don't confirm neigh entries when doing ipsec pmtu updates, from Xu
Wang.
4) More checks to make sure we only send TSO packets to lan78xx chips
that they can actually handle. From James Hughes.
5) Fix ip_tunnel namespace move, from William Dauchy.
6) Fix unintended packet reordering due to cooperation between
listification done by GRO and non-GRO paths. From Maxim
Mikityanskiy.
7) Add Jakub Kicincki formally as networking co-maintainer.
8) Info leak in airo ioctls, from Michael Ellerman.
9) IFLA_MTU attribute needs validation during rtnl_create_link(), from
Eric Dumazet.
10) Use after free during reload in mlxsw, from Ido Schimmel.
11) Dangling pointers are possible in tp->highest_sack, fix from Eric
Dumazet.
12) Missing *pos++ in various networking seq_next handlers, from Vasily
Averin.
13) CHELSIO_GET_MEM operation neds CAP_NET_ADMIN check, from Michael
Ellerman.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (109 commits)
firestream: fix memory leaks
net: cxgb3_main: Add CAP_NET_ADMIN check to CHELSIO_GET_MEM
net: bcmgenet: Use netif_tx_napi_add() for TX NAPI
tipc: change maintainer email address
net: stmmac: platform: fix probe for ACPI devices
net/mlx5e: kTLS, Do not send decrypted-marked SKBs via non-accel path
net/mlx5e: kTLS, Remove redundant posts in TX resync flow
net/mlx5e: kTLS, Fix corner-case checks in TX resync flow
net/mlx5e: Clear VF config when switching modes
net/mlx5: DR, use non preemptible call to get the current cpu number
net/mlx5: E-Switch, Prevent ingress rate configuration of uplink rep
net/mlx5: DR, Enable counter on non-fwd-dest objects
net/mlx5: Update the list of the PCI supported devices
net/mlx5: Fix lowest FDB pool size
net: Fix skb->csum update in inet_proto_csum_replace16().
netfilter: nf_tables: autoload modules from the abort path
netfilter: nf_tables: add __nft_chain_type_get()
netfilter: nf_tables_offload: fix check the chain offload flag
netfilter: conntrack: sctp: use distinct states for new SCTP connections
ipv6_route_seq_next should increase position index
...
|
|
Pull ARM SoC fixes from Olof Johansson:
"A couple of fixes have come in that would be good to include in this
release:
- A fix for amount of memory on Beaglebone Black. Surfaced now since
GRUB2 doesn't update memory size in the booted kernel.
- A fix to make SPI interfaces work on am43x-epos-evm.
- Small Kconfig fix for OPTEE (adds a depend on MMU) to avoid build
failures"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1
tee: optee: Fix compilation issue with nommu
ARM: dts: am335x-boneblack-common: fix memory size
|
|
In fs_open(), 'vcc' is allocated through kmalloc() and assigned to
'atm_vcc->dev_data.' In the following execution, if an error occurs, e.g.,
there is no more free channel, an error code EBUSY or ENOMEM will be
returned. However, 'vcc' is not deallocated, leading to memory leaks. Note
that, in normal cases where fs_open() returns 0, 'vcc' will be deallocated
in fs_close(). But, if fs_open() fails, there is no guarantee that
fs_close() will be invoked.
To fix this issue, deallocate 'vcc' before the error code is returned.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Missing netlink attribute sanity check for NFTA_OSF_DREG,
from Florian Westphal.
2) Use bitmap infrastructure in ipset to fix KASAN slab-out-of-bounds
reads, from Jozsef Kadlecsik.
3) Missing initial CLOSED state in new sctp connection through
ctnetlink events, from Jiri Wiesner.
4) Missing check for NFT_CHAIN_HW_OFFLOAD in nf_tables offload
indirect block infrastructure, from wenxu.
5) Add __nft_chain_type_get() to sanity check family and chain type.
6) Autoload modules from the nf_tables abort path to fix races
reported by syzbot.
7) Remove unnecessary skb->csum update on inet_proto_csum_replace16(),
from Praveen Chaudhary.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull btrfs fix from David Sterba:
"Here's a last minute fix for a regression introduced in this
development cycle.
There's a small chance of a silent corruption when device replace and
NOCOW data writes happen at the same time in one block group. Metadata
or COW data writes are unaffected.
The extra fixup patch is there to silence an unnecessary warning"
* tag 'for-5.5-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: dev-replace: remove warning for unknown return codes when finished
btrfs: scrub: Require mandatory block group RO for dev-replace
|
|
Pull pin control fix from Linus Walleij:
"A single fix for the Intel Sunrisepoint pin controller that makes the
interrupts work properly on it"
* tag 'pinctrl-v5.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunrisepoint: Add missing Interrupt Status register offset
|
|
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2020-01-24
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
Merge conflict: once merge with net-next, a contextual conflict will
appear in drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
since the code moved in net-next.
To resolve, just delete ALL of the conflicting hunk from net.
So sorry for the small mess ..
For -stable v5.4:
('net/mlx5: Update the list of the PCI supported devices')
('net/mlx5: Fix lowest FDB pool size')
('net/mlx5e: kTLS, Fix corner-case checks in TX resync flow')
('net/mlx5e: kTLS, Do not send decrypted-marked SKBs via non-accel path')
('net/mlx5: Eswitch, Prevent ingress rate configuration of uplink rep')
('net/mlx5e: kTLS, Remove redundant posts in TX resync flow')
('net/mlx5: DR, Enable counter on non-fwd-dest objects')
('net/mlx5: DR, use non preemptible call to get the current cpu number')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The fstests btrfs/011 triggered a warning at the end of device replace,
[ 1891.998975] BTRFS warning (device vdd): failed setting block group ro: -28
[ 1892.038338] BTRFS error (device vdd): btrfs_scrub_dev(/dev/vdd, 1, /dev/vdb) failed -28
[ 1892.059993] ------------[ cut here ]------------
[ 1892.063032] WARNING: CPU: 2 PID: 2244 at fs/btrfs/dev-replace.c:506 btrfs_dev_replace_start.cold+0xf9/0x140 [btrfs]
[ 1892.074346] CPU: 2 PID: 2244 Comm: btrfs Not tainted 5.5.0-rc7-default+ #942
[ 1892.079956] RIP: 0010:btrfs_dev_replace_start.cold+0xf9/0x140 [btrfs]
[ 1892.096576] RSP: 0018:ffffbb58c7b3fd10 EFLAGS: 00010286
[ 1892.098311] RAX: 00000000ffffffe4 RBX: 0000000000000001 RCX: 8888888888888889
[ 1892.100342] RDX: 0000000000000001 RSI: ffff9e889645f5d8 RDI: ffffffff92821080
[ 1892.102291] RBP: ffff9e889645c000 R08: 000001b8878fe1f6 R09: 0000000000000000
[ 1892.104239] R10: ffffbb58c7b3fd08 R11: 0000000000000000 R12: ffff9e88a0017000
[ 1892.106434] R13: ffff9e889645f608 R14: ffff9e88794e1000 R15: ffff9e88a07b5200
[ 1892.108642] FS: 00007fcaed3f18c0(0000) GS:ffff9e88bda00000(0000) knlGS:0000000000000000
[ 1892.111558] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1892.113492] CR2: 00007f52509ff420 CR3: 00000000603dd002 CR4: 0000000000160ee0
[ 1892.115814] Call Trace:
[ 1892.116896] btrfs_dev_replace_by_ioctl+0x35/0x60 [btrfs]
[ 1892.118962] btrfs_ioctl+0x1d62/0x2550 [btrfs]
caused by the previous patch ("btrfs: scrub: Require mandatory block
group RO for dev-replace"). Hitting ENOSPC is possible and could happen
when the block group is set read-only, preventing NOCOW writes to the
area that's being accessed by dev-replace.
This has happend with scratch devices of size 12G but not with 5G and
20G, so this is depends on timing and other activity on the filesystem.
The whole replace operation is restartable, the space state should be
examined by the user in any case.
The error code is propagated back to the ioctl caller so the kernel
warning is causing false alerts.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Ido Schimmel says:
====================
mlxsw: Offload TBF
Petr says:
In order to allow configuration of shapers on Spectrum family of
machines, recognize TBF either as root Qdisc, or as a child of ETS or
PRIO. Configure rate of maximum shaper according to TBF rate setting,
and maximum shaper burst size according to TBF burst setting.
- Patches #1 and #2 make the TBF shaper suitable for offloading.
- Patches #3, #4 and #5 are refactoring aimed at easier support of leaf
Qdiscs in general.
- Patches #6 to #10 gradually introduce TBF offload.
- Patches #11 to #14 add selftests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a test that runs traffic across a port throttled with TBF. The test
checks that the observed throughput is within +-5% from the installed
shaper.
To allow checking both the software datapath and the offloaded one, make
the test suitable for inclusion from driver-specific wrapper. Introduce
such wrappers for mlxsw.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function tc_rule_stats_get() fetches a packet counter of a given TC
rule. Extend it to support byte counters as well by adding an optional
argument with selector.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function busywait() is handy as a safety-latched variant of a while
loop. Many selftests deal specifically with counter values, and busywaiting
on them is likely to be rather common (it is not quite common now, but
busywait() has not been around for very long). To facilitate expressing
simply what is tested, introduce two helpers:
- until_counter_is(), which can be used as a predicate passed to
busywait(), which holds when expression, which is itself passed as an
argument to until_counter_is(), reaches a desired value.
- busywait_for_counter(), which is useful for waiting until a given counter
changes "by" (as opposed to "to") a certain amount.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function humanize() is used for converting value in bits/s to a
human-friendly approximate value in Kbps, Mbps or Gbps. There is nothing
hardware-specific in that, so move the function to lib.sh.
Similarly for the rate() function, which just does a bit of math to
calculate a rate, given two counter values and a time interval.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
React to the TC messages that were introduced in a preceding patch and
configure egress maximum shaper as appropriate. TBF can be used as a root
qdisc or under one of PRIO or strict ETS bands.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to allow configuration of burst size together with shaper rate,
extend mlxsw_sp_port_ets_maxrate_set() with a burst_size argument. Convert
call sites to pass 0 (for default).
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Lower limit of burst size configuration is dependent on system type. Add a
datum to track the value. Initialize as appropriate in mlxsw_spX_init().
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As the port speeds grow, the current value of "unlimited shaper",
200000000Kbps, might become lower than the actually supported speeds. Bump
it to the maximum value that fits in the corresponding QEEC field, which is
about 2.1Tbps.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The QEEC register configures scheduling elements. One of the bits of
configuration is the burst size to use for the shaper installed on the
element. Add the necessary fields to support this configuration.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the RED Qdisc is unoffloaded, it needs to reduce the reported backlog
by the amount that is in the HW, so that only the SW backlog is contained
in the counter. The same thing will need to be done by TBF, and likely any
other leaf Qdisc as well.
Extract a helper mlxsw_sp_qdisc_leaf_unoffload() and call it from
mlxsw_sp_qdisc_red_unoffload().
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a wrapper around mlxsw_sp_qdisc_collect_tc_stats() and
mlxsw_sp_qdisc_update_stats() for the simple case of doing both in one go:
mlxsw_sp_qdisc_get_class_stats(). Dispatch to that function from
mlxsw_sp_qdisc_get_red_stats(). This new function will be useful for other
leaf Qdiscs as well.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extract from mlxsw_sp_qdisc_get_prio_stats() two new functions:
mlxsw_sp_qdisc_collect_tc_stats() to accumulate stats for that one TC only,
and mlxsw_sp_qdisc_update_stats() that makes the stats relative to base
values stored earlier. Use them from mlxsw_sp_qdisc_get_red_stats().
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Invoke ndo_setup_tc as appropriate to signal init / replacement, destroying
and dumping of TBF Qdisc.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In 2011, in commit b0460e4484f9 ("sch_tbf: report backlog information"),
TBF started copying backlog depth from the child Qdisc before dumping, with
the motivation that the backlog was otherwise not visible in "tc -s qdisc
show".
Later, in 2016, in commit 8d5958f424b6 ("sch_tbf: update backlog as well"),
TBF got a full-blown backlog tracking. However it kept copying the child's
backlog over before dumping.
That line is now unnecessary, so remove it.
As shown in the following example, backlog is still reported correctly:
# tc -s qdisc show dev veth0 invisible
qdisc tbf 1: root refcnt 2 rate 1Mbit burst 128Kb lat 82.8s
Sent 505475370 bytes 406985 pkt (dropped 0, overlimits 812544 requeues 0)
backlog 81972b 66p requeues 0
qdisc bfifo 0: parent 1:1 limit 10Mb
Sent 505475370 bytes 406985 pkt (dropped 0, overlimits 0 requeues 0)
backlog 81972b 66p requeues 0
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The cxgb3 driver for "Chelsio T3-based gigabit and 10Gb Ethernet
adapters" implements a custom ioctl as SIOCCHIOCTL/SIOCDEVPRIVATE in
cxgb_extension_ioctl().
One of the subcommands of the ioctl is CHELSIO_GET_MEM, which appears
to read memory directly out of the adapter and return it to userspace.
It's not entirely clear what the contents of the adapter memory
contains, but the assumption is that it shouldn't be accessible to all
users.
So add a CAP_NET_ADMIN check to the CHELSIO_GET_MEM case. Put it after
the is_offload() check, which matches two of the other subcommands in
the same function which also check for is_offload() and CAP_NET_ADMIN.
Found by Ilja by code inspection, not tested as I don't have the
required hardware.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Haiyang Zhang says:
====================
hv_netvsc: Add XDP support
Add XDP support and update related document.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Added the new section in the document regarding XDP support
by hv_netvsc driver.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support of XDP in native mode for hv_netvsc driver, and
transparently sets the XDP program on the associated VF NIC as well.
Setting / unsetting XDP program on synthetic NIC (netvsc) propagates to
VF NIC automatically. Setting / unsetting XDP program on VF NIC directly
is not recommended, also not propagated to synthetic NIC, and may be
overwritten by setting of synthetic NIC.
The Azure/Hyper-V synthetic NIC receive buffer doesn't provide headroom
for XDP. We thought about re-use the RNDIS header space, but it's too
small. So we decided to copy the packets to a page buffer for XDP. And,
most of our VMs on Azure have Accelerated Network (SRIOV) enabled, so
most of the packets run on VF NIC. The synthetic NIC is considered as a
fallback data-path. So the data copy on netvsc won't impact performance
significantly.
XDP program cannot run with LRO (RSC) enabled, so you need to disable LRO
before running XDP:
ethtool -K eth0 lro off
XDP actions not yet supported:
XDP_REDIRECT
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Devlink health recover notifications were added only on driver direct
updates of health_state through devlink_health_reporter_state_update().
Add notifications on updates of health_state by devlink flows of report
and recover.
Moved functions devlink_nl_health_reporter_fill() and
devlink_recover_notify() to avoid forward declaration.
Fixes: 97ff3bd37fac ("devlink: add devink notification when reporter update health state")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before commit 7587935cfa11 ("net: bcmgenet: move NAPI initialization to
ring initialization") moved the code, this used to be
netif_tx_napi_add(), but we lost that small semantic change in the
process, restore that.
Fixes: 7587935cfa11 ("net: bcmgenet: move NAPI initialization to ring initialization")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reflecting new realities.
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the print_hex_dump() helper, instead of open-coding the same operations.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Stefano Brivio
Pablo Neira Ayuso
Abdul Kabbani
David S. Miller
Julian Wiedmann
Tony Nguyen
Md Fahad Iqbal Polash
Linus Torvalds
Wenwen Wang
David Sterba
Petr Machata
Michael Ellerman
Haiyang Zhang
Moshe Shemesh
Florian Fainelli
Jon Maloy
Andy Shevchenko