aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-08-15Merge branch 'remotes/lorenzo/pci/vmd'Bjorn Helgaas1-1/+12
- Whitelist VMD devices with fast interrupt handlers to avoid sharing vectors with slow handlers (Keith Busch) * remotes/lorenzo/pci/vmd: PCI: vmd: White list for fast interrupt handlers
2018-08-15Merge branch 'remotes/lorenzo/pci/mvebu'Bjorn Helgaas1-85/+68
- Fix mvebu I/O space remapping issues (Thomas Petazzoni) - Use generic pci_host_bridge in mvebu instead of ARM-specific API (Thomas Petazzoni) * remotes/lorenzo/pci/mvebu: PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers() PCI: mvebu: Convert to use pci_host_bridge directly PCI: mvebu: Use resource_size() to remap I/O space PCI: mvebu: Only remap I/O space if configured PCI: mvebu: Fix I/O space end address calculation PCI: mvebu: Remove redundant platform_set_drvdata() call
2018-08-15Merge branch 'remotes/lorenzo/pci/mobiveil'Bjorn Helgaas3-1/+14
- Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi) - Fix mobiveil missing include file (Lorenzo Pieralisi) - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi) * remotes/lorenzo/pci/mobiveil: PCI: mobiveil: Add Kconfig/Makefile entries PCI: mobiveil: Add missing ../pci.h include PCI: mobiveil: Fix struct mobiveil_pcie.pcie_reg_base address type PCI: mobiveil: Integer overflow in IB_WIN_SIZE
2018-08-15Merge branch 'remotes/lorenzo/pci/iproc'Bjorn Helgaas3-26/+144
- Add more devices to Broadcom PAXC quirk (Ray Jui) - Work around corrupted Broadcom PAXC config space to enable SMMU and GICv3 ITS (Ray Jui) - Disable MSI parsing to work around broken Broadcom PAXC logic in some devices (Ray Jui) - Hide unconfigured functions to work around a Broadcom PAXC defect (Ray Jui) - Lower iproc log level to reduce console output during boot (Ray Jui) * remotes/lorenzo/pci/iproc: PCI: iproc: Reduce inbound/outbound mapping print level PCI: iproc: Reject unconfigured physical functions from PAXC PCI: iproc: Disable MSI parsing in certain PAXC blocks PCI: iproc: Fix up corrupted PAXC root complex config registers PCI: iproc: Activate PAXC bridge quirk for more devices
2018-08-15Merge branch 'remotes/lorenzo/pci/hv'Bjorn Helgaas1-1/+1
- Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation (Jia-Ju Bai) * remotes/lorenzo/pci/hv: PCI: hv: Replace GFP_ATOMIC with GFP_KERNEL in new_pcichild_device()
2018-08-15Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas30-159/+763
- Add Kirin MSI support (Xiaowei Song) - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone, armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn Guo) - Move link notification settings from DesignWare core to individual drivers (Gustavo Pimentel) - Add endpoint library MSI-X interfaces (Gustavo Pimentel) - Correct signature of endpoint library IRQ interfaces (Gustavo Pimentel) - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel) - Add endpoint library MSI-X test support (Gustavo Pimentel) * remotes/lorenzo/pci/dwc: PCI: endpoint: Add MSI set maximum restriction tools: PCI: Add MSI-X support pci_endpoint_test: Add 2 ioctl commands pci-epf-test/pci_endpoint_test: Add MSI-X support pci-epf-test/pci_endpoint_test: Use irq_type module parameter pci-epf-test/pci_endpoint_test: Cleanup PCI_ENDPOINT_TEST memspace PCI: dwc: Add legacy interrupt callback handler PCI: dwc: Rework MSI callbacks handler PCI: dwc: Add MSI-X callbacks handler PCI: Update xxx_pcie_ep_raise_irq() and pci_epc_raise_irq() signatures PCI: endpoint: Add MSI-X interfaces PCI: dwc: Fix EP link notification implementation PCI: spear13xx: Drop unnecessary root_bus_nr setting PCI: qcom: Drop unnecessary root_bus_nr setting PCI: histb: Drop unnecessary root_bus_nr setting PCI: designware-plat: Drop unnecessary root_bus_nr setting PCI: artpec6: Drop unnecessary root_bus_nr setting PCI: armada8k: Drop unnecessary root_bus_nr setting PCI: keystone: Drop unnecessary root_bus_nr setting PCI: imx6: Drop unnecessary root_bus_nr setting PCI: exynos: Drop unnecessary root_bus_nr setting PCI: kirin: Add MSI support
2018-08-15Merge branch 'remotes/lorenzo/pci/cadence'Bjorn Helgaas6-4/+194
- Correct the Cadence cdns_pcie_writel() signature (Alan Douglas) - Add Cadence support for optional generic PHYs (Alan Douglas) - Add Cadence power management ops (Alan Douglas) - Remove redundant variable from Cadence driver (Colin Ian King) * remotes/lorenzo/pci/cadence: PCI: pcie-cadence-ep: Remove redundant variable mmc PCI: cadence: Add shutdown callback to host driver PCI: cadence: Add Power Management ops for host and EP dt-bindings: PCI: cadence: Add DT bindings for optional PHYs PCI: cadence: Add generic PHY support to host and EP drivers PCI: cadence: Update cdns_pcie_writel() function signature
2018-08-15Merge branch 'remotes/lorenzo/pci/aardvark'Bjorn Helgaas1-67/+12
- Remove Aardvark outbound window configuration (Evan Wang) - Fix Aardvark bridge window sizing issue (Zachary Zhang) - Convert Aardvark to use pci_host_probe() to reduce code duplication (Thomas Petazzoni) * remotes/lorenzo/pci/aardvark: PCI: aardvark: Convert to use pci_host_probe() PCI: aardvark: Size bridges before resources allocation PCI: aardvark: Remove PCIe outbound window configuration PCI: aardvark: Introduce an advk_pcie_valid_device() helper # Conflicts: # drivers/pci/controller/pci-aardvark.c
2018-08-15Merge branch 'remotes/lorenzo/pci/controller/misc'Bjorn Helgaas1-1/+1
- Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt) * remotes/lorenzo/pci/controller/misc: PCI/xilinx: Depend on OF instead of the ARCH
2018-08-15Merge branch 'pci/virtualization'Bjorn Helgaas13-86/+181
- To avoid bus errors, enable PASID only if entire path supports End-End TLP prefixes (Sinan Kaya) - Unify slot and bus reset functions and remove hotplug knowledge from callers (Sinan Kaya) - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to fix guest reboot issues (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller (Bjorn Helgaas) * pci/virtualization: PCI: Add function 1 DMA alias quirk for Marvell 88SS9183 PCI: Delay after FLR of Intel DC P3700 NVMe PCI: Disable Samsung SM961/PM961 NVMe before FLR PCI: Export pcie_has_flr() PCI: Rename pci_try_reset_bus() to pci_reset_bus() PCI: Deprecate pci_reset_bus() and pci_reset_slot() functions PCI: Unify try slot and bus reset API PCI: Hide pci_reset_bridge_secondary_bus() from drivers IB/hfi1: Use pci_try_reset_bus() for initiating PCI Secondary Bus Reset PCI: Handle error return from pci_reset_bridge_secondary_bus() PCI/IOV: Tidy pci_sriov_set_totalvfs() PCI: Enable PASID only if entire path supports End-End TLP prefixes # Conflicts: # drivers/pci/hotplug/pciehp_hpc.c
2018-08-15Merge branch 'pci/switchtec'Bjorn Helgaas6-14/+163
- Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer) - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe) * pci/switchtec: PCI: Expand documentation for pci_add_dma_alias() PCI: Add DMA alias quirk for Microsemi Switchtec NTB switchtec: Use generic PCI Vendor ID and Class Code # Conflicts: # drivers/pci/quirks.c
2018-08-15Merge branch 'pci/resource'Bjorn Helgaas12-72/+71
- Clean up devm_of_pci_get_host_bridge_resources() resource allocation (Jan Kiszka) - Fixup resizable BARs after suspend/resume (Christian König) - Make "pci=earlydump" generic (Sinan Kaya) - Fix ROM BAR access routines to stay in bounds and check for signature correctly (Rex Zhu) * pci/resource: PCI: Make pci_get_rom_size() static PCI: Add check code for last image indicator not set PCI: Avoid accessing memory outside the ROM BAR PCI: Make early dump functionality generic PCI: Cleanup PCI_REBAR_CTRL_BAR_SHIFT handling PCI: Restore resized BAR state on resume PCI: Clean up resource allocation in devm_of_pci_get_host_bridge_resources() # Conflicts: # Documentation/admin-guide/kernel-parameters.txt
2018-08-15Merge branch 'pci/peer-to-peer'Bjorn Helgaas5-85/+373
- Add "pci=disable_acs_redir=" parameter to disable ACS redirection for peer-to-peer DMA support (we don't have the peer-to-peer support yet; this is just one piece) (Logan Gunthorpe) * pci/peer-to-peer: PCI: Add ACS Redirect disable quirk for Intel Sunrise Point PCI: Add device-specific ACS Redirect disable infrastructure PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support PCI: Allow specifying devices using a base bus and path of devfns PCI: Make specifying PCI devices in kernel parameters reusable PCI: Hide ACS quirk declarations inside PCI core
2018-08-15Merge branch 'pci/notes'Bjorn Helgaas2-0/+189
- Document ACPI description of PCI host bridges (Bjorn Helgaas) * pci/notes: PCI: Document ACPI description of PCI host bridges
2018-08-15Merge branch 'pci/msi'Bjorn Helgaas1-0/+3
- Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit) * pci/msi: PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips
2018-08-15Merge branch 'pci/misc'Bjorn Helgaas14-26/+38
- Mark fall-through switch cases before enabling -Wimplicit-fallthrough (Gustavo A. R. Silva) - Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig) - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied (Heiner Kallweit) - Unify PCI and DMA direction #defines (Shunyong Yang) - Add PCI_DEVICE_DATA() macro (Andy Shevchenko) - Check for VPD completion before checking for timeout (Bert Kenward) - Limit Netronome NFP5000 config space size to work around erratum (Jakub Kicinski) * pci/misc: PCI: Limit config space size for Netronome NFP5000 PCI/VPD: Check for VPD access completion before checking for timeout PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry PCI: Unify PCI and normal DMA direction definitions PCI: Use IRQF_ONESHOT if pci_request_irq() called with no handler PCI: Call dma_debug_add_bus() for pci_bus_type from PCI core PCI: Mark fall-through switch cases before enabling -Wimplicit-fallthrough # Conflicts: # drivers/pci/hotplug/pciehp_ctrl.c
2018-08-15Merge branch 'pci/hotplug'Bjorn Helgaas29-964/+715
- Simplify SHPC existence/permission checks (Bjorn Helgaas) - Remove hotplug sample skeleton driver (Lukas Wunner) - Convert pciehp to threaded IRQ handling (Lukas Wunner) - Improve pciehp tolerance of missed events and initially unstable links (Lukas Wunner) - Clear spurious pciehp events on resume (Lukas Wunner) - Add pciehp runtime PM support, including for Thunderbolt controllers (Lukas Wunner) - Support interrupts from pciehp bridges in D3hot (Lukas Wunner) * pci/hotplug: PCI: pciehp: Deduplicate presence check on probe & resume PCI: pciehp: Avoid implicit fallthroughs in switch statements PCI: Whitelist Thunderbolt ports for runtime D3 PCI: Whitelist native hotplug ports for runtime D3 PCI: sysfs: Resume to D0 on function reset PCI: pciehp: Resume parent to D0 on config space access PCI: pciehp: Resume to D0 on enable/disable PCI: pciehp: Support interrupts sent from D3hot PCI: pciehp: Obey compulsory command delay after resume PCI: pciehp: Clear spurious events earlier on resume PCI: portdrv: Deduplicate PM callback iterator PCI: pciehp: Avoid slot access during reset PCI: pciehp: Always enable occupied slot on probe PCI: pciehp: Become resilient to missed events PCI: pciehp: Tolerate initially unstable link PCI: pciehp: Declare pciehp_enable/disable_slot() static PCI: pciehp: Drop enable/disable lock PCI: pciehp: Enable/disable exclusively from IRQ thread PCI: pciehp: Track enable/disable status PCI: pciehp: Publish to user space last on probe PCI: hotplug: Demidlayer registration with the core PCI: pciehp: Drop slot workqueue PCI: pciehp: Handle events synchronously PCI: pciehp: Stop blinking on slot enable failure PCI: pciehp: Convert to threaded polling PCI: pciehp: Convert to threaded IRQ PCI: pciehp: Document struct slot and struct controller PCI: pciehp: Declare pciehp_unconfigure_device() void PCI: pciehp: Drop unnecessary NULL pointer check PCI: pciehp: Fix unprotected list iteration in IRQ handler PCI: pciehp: Fix use-after-free on unplug PCI: hotplug: Don't leak pci_slot on registration failure PCI: hotplug: Delete skeleton driver PCI: shpchp: Separate existence of SHPC and permission to use it
2018-08-15Merge branch 'pci/enumeration'Bjorn Helgaas4-11/+135
- Work around IDT switch ACS Source Validation erratum (James Puthukattukaran) - Emit diagnostics for all cases of PCIe Link downtraining (Links operating slower than they're capable of) (Alexandru Gagniuc) - Skip VFs when configuring Max Payload Size (Myron Stowe) - Reduce Root Port Max Payload Size if necessary when hot-adding a device below it (Myron Stowe) * pci/enumeration: PCI: Match Root Port's MPS to endpoint's MPSS as necessary PCI: Skip MPS logic for Virtual Functions (VFs) PCI: Check for PCIe Link downtraining PCI: Workaround IDT switch ACS Source Validation erratum
2018-08-15Merge branch 'pci/dpc'Bjorn Helgaas1-65/+42
- Defer DPC event handling to work queue (Keith Busch) - Use threaded IRQ for DPC bottom half (Keith Busch) - Print AER status while handling DPC events (Keith Busch) * pci/dpc: PCI/DPC: Remove indirection waiting for inactive link PCI/DPC: Use threaded IRQ for bottom half handling PCI/DPC: Print AER status in DPC event handling PCI/DPC: Remove rp_pio_status from dpc struct PCI/DPC: Defer event handling to work queue PCI/DPC: Leave interrupts enabled while handling event
2018-08-15Merge branch 'pci/aspm'Bjorn Helgaas8-12/+3
- Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy Shevchenko) - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas) * pci/aspm: PCI: Remove unnecessary include of <linux/pci-aspm.h> iwlwifi: Remove unnecessary include of <linux/pci-aspm.h> ath9k: Remove unnecessary include of <linux/pci-aspm.h> igb: Remove unnecessary include of <linux/pci-aspm.h> PCI/ASPM: Convert to use sysfs_match_string() helper
2018-08-15Merge branch 'pci/aer'Bjorn Helgaas9-106/+449
- Decode AER errors with names similar to "lspci" (Tyler Baicar) - Expose AER statistics in sysfs (Rajat Jain) - Clear AER status bits selectively based on the type of recovery (Oza Pawandeep) - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru Gagniuc) - Don't clear AER status bits if we're using the "Firmware-First" strategy where firmware owns the registers (Alexandru Gagniuc) * pci/aer: PCI/AER: Don't clear AER bits if error handling is Firmware-First PCI/AER: Remove duplicate PCI_EXP_AER_FLAGS definition PCI/portdrv: Remove pcie_portdrv_err_handler.slot_reset PCI/AER: Clear device status bits during ERR_COR handling PCI/AER: Clear device status bits during ERR_FATAL and ERR_NONFATAL PCI/AER: Remove ERR_FATAL code from ERR_NONFATAL path PCI/AER: Factor out ERR_NONFATAL status bit clearing PCI/AER: Clear only ERR_NONFATAL bits during non-fatal recovery PCI/AER: Clear only ERR_FATAL status bits during fatal recovery PCI/AER: Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST PCI/AER: Add sysfs attributes for rootport cumulative stats PCI/AER: Add sysfs attributes to provide AER stats and breakdown PCI/AER: Define aer_stats structure for AER capable devices PCI/AER: Move internal declarations to drivers/pci/pci.h PCI/AER: Adopt lspci names for AER error decoding PCI/AER: Expose internal API for obtaining AER information # Conflicts: # drivers/pci/pci.h
2018-08-15Merge branch 'for-linus'Bjorn Helgaas35-61/+187
* for-linus: PCI: Fix is_added/is_busmaster race condition PCI: mobiveil: Avoid integer overflow in IB_WIN_SIZE PCI/AER: Work around use-after-free in pcie_do_fatal_recovery() PCI: v3-semi: Fix I/O space page leak PCI: mediatek: Fix I/O space page leak PCI: faraday: Fix I/O space page leak PCI: aardvark: Fix I/O space page leak PCI: designware: Fix I/O space page leak PCI: versatile: Fix I/O space page leak PCI: xgene: Fix I/O space page leak PCI: OF: Fix I/O space page leak PCI: endpoint: Fix NULL pointer dereference error when CONFIGFS is disabled PCI: hv: Disable/enable IRQs rather than BH in hv_compose_msi_msg() nfp: stop limiting VFs to 0 PCI/IOV: Reset total_VFs limit after detaching PF driver PCI: faraday: Add missing of_node_put() PCI: xilinx-nwl: Add missing of_node_put() PCI: xilinx: Add missing of_node_put() PCI: endpoint: Use after free in pci_epf_unregister_driver() PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes PCI: rcar: Clean up PHY init on failure PCI: rcar: Shut the PHY down in failpath PCI: controller: Move PCI_DOMAINS selection to arch Kconfig PCI: Initialize endpoint library before controllers PCI: shpchp: Manage SHPC unconditionally on non-ACPI systems
2018-08-15PCI/AER: Don't clear AER bits if error handling is Firmware-FirstAlexandru Gagniuc1-0/+9
If the platform requests Firmware-First error handling, firmware is responsible for reading and clearing AER status bits. If OSPM also clears them, we may miss errors. See ACPI v6.2, sec 18.3.2.5 and 18.4. This race is mostly of theoretical significance, as it is not easy to reasonably demonstrate it in testing. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [bhelgaas: add similar guards to pci_cleanup_aer_uncorrect_error_status() and pci_aer_clear_fatal_status()] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-08-14PCI: Limit config space size for Netronome NFP5000Jakub Kicinski2-0/+2
Like the NFP4000 and NFP6000, the NFP5000 as an erratum where reading/ writing to PCI config space addresses above 0x600 can cause the NFP to generate PCIe completion timeouts. Limit the NFP5000's PF's config space size to 0x600 bytes as is already done for the NFP4000 and NFP6000. The NFP5000's VF is 0x6003 (PCI_DEVICE_ID_NETRONOME_NFP6000_VF), the same device ID as the NFP6000's VF. Thus, its config space is already limited by the existing use of quirk_nfp6000(). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tony Egan <tony.egan@netronome.com>
2018-08-14PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchipsHeiner Kallweit1-0/+3
If flag IRQCHIP_ONESHOT_SAFE isn't set for an irqchip and we have a threaded interrupt with no primary handler, flag IRQF_ONESHOT needs to be set for the interrupt, causing some overhead in the threaded interrupt handler. For more detailed explanation also check following comment in __setup_irq(): The interrupt was requested with handler = NULL, so we use the default primary handler for it. But it does not have the oneshot flag set. In combination with level interrupts this is deadly, because the default primary handler just wakes the thread, then the irq lines is reenabled, but the device still has the level irq asserted. Rinse and repeat.... While this works for edge type interrupts, we play it safe and reject unconditionally because we can't say for sure which type this interrupt really has. The type flags are unreliable as the underlying chip implementation can override them. Another comment in __setup_irq() gives a hint already that this overhead can be avoided for PCI-MSI: Some irq chips like MSI based interrupts are per se one shot safe. Check the chip flags, so we can avoid the unmask dance at the end of the threaded handler for those. Following this let's mark all PCI-MSI irqchips as oneshot-safe. See also discussion here: https://lkml.kernel.org/r/alpine.DEB.2.21.1808032136490.1658@nanos.tec.linutronix.de Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-08-14PCI/VPD: Check for VPD access completion before checking for timeoutBert Kenward1-2/+5
Previously we checked the timeout before checking the VPD access completion bit. On a very heavily loaded system this can cause VPD access to timeout. Check the completion bit before checking the timeout. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-08-14PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entryAndy Shevchenko2-6/+15
There are a lot of examples in the kernel where PCI_VDEVICE() is used and still looks not so convenient due to additional driver_data field attached. Introduce PCI_DEVICE_DATA() macro to fully describe device ID entry in shortest possible form. For example, before: { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD), (kernel_ulong_t) &dwc3_pci_mrfld_properties, }, after: { PCI_DEVICE_DATA(INTEL, MRFLD, &dwc3_pci_mrfld_properties) }, Drivers can be converted later on in independent way. While here, remove the unused macro with the same name from Ralink wireless driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> # for rt2x00
2018-08-14PCI: Match Root Port's MPS to endpoint's MPSS as necessaryMyron Stowe1-2/+10
In commit 27d868b5e6cf ("PCI: Set MPS to match upstream bridge"), we made sure every device's MPS setting matches its upstream bridge, making it more likely that a hot-added device will work in a system with an optimized MPS configuration. Recently I've started encountering systems where the endpoint device's MPSS capability is less than its Root Port's current MPS value, thus the endpoint is not capable of matching its upstream bridge's MPS setting (see: bugzilla via "Link:" below). This leaves the system vulnerable - the upstream Root Port could respond with larger TLPs than the device can handle, and the device will consider them to be 'Malformed'. One could use the "pci=pcie_bus_safe" kernel parameter to work around the issue, but that forces a user to supply a kernel parameter to get the system to function reliably and may end up limiting MPS settings of other unrelated, sub-topologies which could benefit from maintaining their larger values. Augment Keith's approach to include tuning down a Root Port's MPS setting when its hot-added endpoint device is not capable of matching it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200527 Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jon Mason <jdmason@kudzu.us> Cc: Keith Busch <keith.busch@intel.com> Cc: Sinan Kaya <okaya@kernel.org> Cc: Dongdong Liu <liudongdong3@huawei.com>
2018-08-14PCI: Skip MPS logic for Virtual Functions (VFs)Myron Stowe1-0/+4
PCIe r4.0, sec 9.3.5.4, "Device Control Register", shows both Max_Payload_Size (MPS) and Max_Read_request_Size (MRRS) to be 'RsvdP' for VFs. Just prior to the table it states: "PF and VF functionality is defined in Section 7.5.3.4 except where noted in Table 9-16. For VF fields marked 'RsvdP', the PF setting applies to the VF." All of which implies that with respect to Max_Payload_Size Supported (MPSS), MPS, and MRRS values, we should not be paying any attention to the VF's fields, but rather only to the PF's. Only looking at the PF's fields also logically makes sense as it's the sole physical interface to the PCIe bus. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200527 Fixes: 27d868b5e6cf ("PCI: Set MPS to match upstream bridge") Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # 4.3+ Cc: Keith Busch <keith.busch@intel.com> Cc: Sinan Kaya <okaya@kernel.org> Cc: Dongdong Liu <liudongdong3@huawei.com> Cc: Jon Mason <jdmason@kudzu.us>
2018-08-13PCI: Add function 1 DMA alias quirk for Marvell 88SS9183Bjorn Helgaas1-0/+3
Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller. Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679#c134 Reported-and-tested-by: Felix Blüthner <f.bluethner@mailbox.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-08-10PCI: Check for PCIe Link downtrainingAlexandru Gagniuc3-7/+42
When both ends of a PCIe Link are capable of a higher bandwidth than is currently in use, the Link is said to be "downtrained". A downtrained Link may indicate hardware or configuration problems in the system, but it's hard to identify such Links from userspace. Refactor pcie_print_link_status() so it continues to always print PCIe bandwidth information, as several NIC drivers desire. Add a new internal __pcie_print_link_status() to emit a message only when a device's bandwidth is constrained by the fabric and call it from the PCI core for all devices, which identifies all downtrained Links. It also emits messages for a few cases that are technically not downtrained, such as a x4 device in an open-ended x1 slot. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [bhelgaas: changelog, move __pcie_print_link_status() declaration to drivers/pci/, rename pcie_check_upstream_link() to pcie_report_downtraining()] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-08-09PCI: Add ACS Redirect disable quirk for Intel Sunrise PointLogan Gunthorpe1-0/+25
Intel Sunrise Point PCH hardware has an implementation of the ACS bits that does not comply with the PCIe standard. Add a device-specific quirk, pci_quirk_disable_intel_spt_pch_acs_redir() to disable ACS Redirection on this system. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: changelog, split to separate patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2018-08-09PCI: Add device-specific ACS Redirect disable infrastructureLogan Gunthorpe3-8/+43
Intel Sunrise Point (SPT) PCH hardware has an implementation of the ACS bits that does not comply with the PCIe standard. To deal with this we need device-specific quirks to disable ACS redirection. Add a new pci_dev_specific_disable_acs_redir() quirk and a new .disable_acs_redir() function pointer for use by non-compliant devices. No functional change intended. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: split to separate patch, move pci_dev_specific_disable_acs_redir() declarations to drivers/pci/pci.h] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2018-08-09PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZELogan Gunthorpe1-9/+9
Convert the search for device-specific ACS enable quirks from searching a NULL-terminated array to iterating through the array, which is always fixed-size anyway. No functional change intended. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: changelog, split to separate patch for reviewability] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2018-08-09PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer supportLogan Gunthorpe2-2/+80
To support peer-to-peer traffic on a segment of the PCI hierarchy, we must disable the ACS redirect bits for select PCI bridges. The bridges must be selected before the devices are discovered by the kernel and the IOMMU groups created. Therefore, add a kernel command line parameter to specify devices which must have their ACS bits disabled. The new parameter takes a list of devices separated by a semicolon. Each device specified will have its ACS redirect bits disabled. This is similar to the existing 'resource_alignment' parameter. The ACS Request P2P Request Redirect, P2P Completion Redirect and P2P Egress Control bits are disabled, which is sufficient to always allow passing P2P traffic uninterrupted. The bits are set after the kernel (optionally) enables the ACS bits itself. It is also done regardless of whether the kernel or platform firmware sets the bits. If the user tries to disable the ACS redirect for a device without the ACS capability, print a warning to dmesg. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: reorder to add the generic code first and move the device-specific quirk to subsequent patches] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Christian König <christian.koenig@amd.com>
2018-08-09PCI: Allow specifying devices using a base bus and path of devfnsLogan Gunthorpe2-23/+103
When specifying PCI devices on the kernel command line using a bus/device/function address, bus numbers can change when adding or replacing a device, changing motherboard firmware, or applying kernel parameters like "pci=assign-buses". When bus numbers change, it's likely the command line tweak will be applied to the wrong device. Therefore, it is useful to be able to specify devices with a base bus number and the path of devfns needed to get to it, similar to the "device scope" structure in the Intel VT-d spec, Section 8.3.1. Thus, we add an option to specify devices in the following format: [<domain>:]<bus>:<device>.<func>[/<device>.<func>]* The path can be any segment within the PCI hierarchy of any length and determined through the use of 'lspci -t'. When specified this way, it is less likely that a renumbered bus will result in a valid device specification and the tweak won't be applied to the wrong device. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: use "device" instead of "slot" in documentation since that's the usual language in the PCI specs] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Christian König <christian.koenig@amd.com>
2018-08-09PCI: Make specifying PCI devices in kernel parameters reusableLogan Gunthorpe2-59/+126
Separate out the code to match a PCI device with a string (typically originating from a kernel parameter) from the pci_specified_resource_alignment() function into its own helper function. While we are at it, this change fixes the kernel style of the function (fixing a number of long lines and extra parentheses). Additionally, make the analogous change to the kernel parameter documentation: Separate the description of how to specify a PCI device into its own section at the head of the "pci=" parameter. This patch should have no functional alterations. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: use "device" instead of "slot" in documentation since that's the usual language in the PCI specs] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Christian König <christian.koenig@amd.com>
2018-08-09PCI: Hide ACS quirk declarations inside PCI coreBjorn Helgaas2-11/+14
Move declarations for these functions: pci_dev_specific_acs_enabled() pci_dev_specific_enable_acs() from include/linux/pci.h to drivers/pci/pci.h because nothing outside the PCI core needs to use them. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-08-09PCI: Delay after FLR of Intel DC P3700 NVMeAlex Williamson1-0/+22
Add a device-specific reset for Intel DC P3700 NVMe device which exhibits a timeout failure in drivers waiting for the ready status to update after NVMe enable if the driver interacts with the device too soon after FLR. As this has been observed in device assignment scenarios, resolve this with a device-specific reset quirk to add an additional, heuristically determined, delay after the FLR completes. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1592654 Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-08-09PCI: Disable Samsung SM961/PM961 NVMe before FLRAlex Williamson1-0/+83
The Samsung SM961/PM961 (960 EVO) sometimes fails to return from FLR with the PCI config space reading back as -1. A reproducible instance of this behavior is resolved by clearing the enable bit in the NVMe configuration register and waiting for the ready status to clear (disabling the NVMe controller) prior to FLR. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1542494 Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-08-09PCI: Export pcie_has_flr()Alex Williamson2-1/+3
pcie_flr() suggests pcie_has_flr() to ensure that PCIe FLR support is present prior to calling. pcie_flr() is exported while pcie_has_flr() is not. Resolve this. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-08-08PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers()Thomas Petazzoni1-5/+0
This comment has been there since the driver was introduced, but seems to be a leftover from previous iterations of the driver. Indeed, we do not lookup in a list to find the register ranges that matches the given port/lane, as the "reg" property is in each sub-node representing a PCI port. There is no lookup involved at all. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-08-08PCI: mvebu: Convert to use pci_host_bridge directlyThomas Petazzoni1-73/+63
Rather than using the ARM-specific pci_common_init_dev() API, use the pci_host_bridge logic directly. Unfortunately, we can't use devm_of_pci_get_host_bridge_resources(), because the DT binding for describing PCIe apertures for this PCI controller is a bit special, and we cannot retrieve them from the 'ranges' property. Therefore, we still have some special code to handle this. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-08-08PCI: mvebu: Use resource_size() to remap I/O spaceThomas Petazzoni1-2/+2
Instead of hardcoding the remapping of IO_SPACE_LIMIT - SZ_64K, use resource_size(). However, we cannot use just IO_SPACE_LIMIT, because pci_ioremap_io() has a bug and doesn't allow remapping the last 64 KB before IO_SPACE_LIMIT, so we ensure that we do not exceed this limit. When the pci_ioremap_io() issue is fixed, this work around can be dropped. Note that this workaround already existed, since we were mapping only up to IO_SPACE_LIMIT - SZ_64K. Suggested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> [lorenzo.pieralisi@arm.com: tweaked the commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-08-08PCI: mvebu: Only remap I/O space if configuredThomas Petazzoni1-3/+3
If there is no PCI I/O aperture configured in the Device Tree, it does not make sense to create the virtual mapping for the PCI I/O space, since we will anyway not create the MBus window that will allow to access it. Therefore, do the pci_ioremap_io() only if necessary. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-08-08PCI: mvebu: Fix I/O space end address calculationThomas Petazzoni1-1/+1
pcie->realio.end should be the address of last byte of the area, therefore using resource_size() of another resource is not correct, we must substract 1 to get the address of the last byte. Fixes: 11be65472a427 ("PCI: mvebu: Adapt to the new device tree layout") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-08-08PCI: mvebu: Remove redundant platform_set_drvdata() callThomas Petazzoni1-2/+0
This is already done earlier in mvebu_pcie_probe(). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-08-06PCI: Remove unnecessary include of <linux/pci-aspm.h>Bjorn Helgaas4-4/+0
Several PCI core files include pci-aspm.h even though they don't need anything provided by that file. Remove the unnecessary includes of it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-08-06iwlwifi: Remove unnecessary include of <linux/pci-aspm.h>Bjorn Helgaas1-1/+0
This part of the iwlwifi driver doesn't need anything provided by pci-aspm.h, so remove the unnecessary include of it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> Acked-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-06ath9k: Remove unnecessary include of <linux/pci-aspm.h>Bjorn Helgaas1-1/+0
The ath9k driver doesn't need anything provided by pci-aspm.h, so remove the unnecessary include of it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> Acked-by: Kalle Valo <kvalo@codeaurora.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.