aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-02-22Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds103-1083/+1253
Pull s390 updates from Martin Schwidefsky: - New entropy generation for the pseudo random number generator. - Early boot printk output via sclp to help debug crashes on boot. This needs to be enabled with a kernel parameter. - Add proper no-execute support with a bit in the page table entry. - Bug fixes and cleanups. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (65 commits) s390/syscall: fix single stepped system calls s390/zcrypt: make ap_bus explicitly non-modular s390/zcrypt: Removed unneeded debug feature directory creation. s390: add missing "do {} while (0)" loop constructs to multiline macros s390/mm: add cond_resched call to kernel page table dumper s390: get rid of MACHINE_HAS_PFMF and MACHINE_HAS_HPAGE s390/mm: make memory_block_size_bytes available for !MEMORY_HOTPLUG s390: replace ACCESS_ONCE with READ_ONCE s390: Audit and remove any remaining unnecessary uses of module.h s390: mm: Audit and remove any unnecessary uses of module.h s390: kernel: Audit and remove any unnecessary uses of module.h s390/kdump: Use "LINUX" ELF note name instead of "CORE" s390: add no-execute support s390: report new vector facilities s390: use correct input data address for setup_randomness s390/sclp: get rid of common response code handling s390/sclp: don't add new lines to each printed string s390/sclp: make early sclp code readable s390/sclp: disable early sclp code as soon as the base sclp driver is active s390/sclp: move early printk code to drivers ...
2017-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1746-35448/+97298
Pull networking updates from David Miller: "Highlights: 1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini Varadhan. 2) Simplify classifier state on sk_buff in order to shrink it a bit. From Willem de Bruijn. 3) Introduce SIPHASH and it's usage for secure sequence numbers and syncookies. From Jason A. Donenfeld. 4) Reduce CPU usage for ICMP replies we are going to limit or suppress, from Jesper Dangaard Brouer. 5) Introduce Shared Memory Communications socket layer, from Ursula Braun. 6) Add RACK loss detection and allow it to actually trigger fast recovery instead of just assisting after other algorithms have triggered it. From Yuchung Cheng. 7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot. 8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert. 9) Export MPLS packet stats via netlink, from Robert Shearman. 10) Significantly improve inet port bind conflict handling, especially when an application is restarted and changes it's setting of reuseport. From Josef Bacik. 11) Implement TX batching in vhost_net, from Jason Wang. 12) Extend the dummy device so that VF (virtual function) features, such as configuration, can be more easily tested. From Phil Sutter. 13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric Dumazet. 14) Add new bpf MAP, implementing a longest prefix match trie. From Daniel Mack. 15) Packet sample offloading support in mlxsw driver, from Yotam Gigi. 16) Add new aquantia driver, from David VomLehn. 17) Add bpf tracepoints, from Daniel Borkmann. 18) Add support for port mirroring to b53 and bcm_sf2 drivers, from Florian Fainelli. 19) Remove custom busy polling in many drivers, it is done in the core networking since 4.5 times. From Eric Dumazet. 20) Support XDP adjust_head in virtio_net, from John Fastabend. 21) Fix several major holes in neighbour entry confirmation, from Julian Anastasov. 22) Add XDP support to bnxt_en driver, from Michael Chan. 23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan. 24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi. 25) Support GRO in IPSEC protocols, from Steffen Klassert" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits) Revert "ath10k: Search SMBIOS for OEM board file extension" net: socket: fix recvmmsg not returning error from sock_error bnxt_en: use eth_hw_addr_random() bpf: fix unlocking of jited image when module ronx not set arch: add ARCH_HAS_SET_MEMORY config net: napi_watchdog() can use napi_schedule_irqoff() tcp: Revert "tcp: tcp_probe: use spin_lock_bh()" net/hsr: use eth_hw_addr_random() net: mvpp2: enable building on 64-bit platforms net: mvpp2: switch to build_skb() in the RX path net: mvpp2: simplify MVPP2_PRS_RI_* definitions net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT net: mvpp2: remove unused register definitions net: mvpp2: simplify mvpp2_bm_bufs_add() net: mvpp2: drop useless fields in mvpp2_bm_pool and related code net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue' net: mvpp2: release reference to txq_cpu[] entry after unmapping net: mvpp2: handle too large value in mvpp2_rx_time_coal_set() net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set() net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set ...
2017-02-22Merge tag 'gcc-plugins-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds8-29/+326
Pull gcc-plugins updates from Kees Cook: "This includes infrastructure updates and the structleak plugin, which performs forced initialization of certain structures to avoid possible information exposures to userspace. Summary: - infrastructure updates (gcc-common.h) - introduce structleak plugin for forced initialization of some structures" * tag 'gcc-plugins-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: Add structleak for more stack initialization gcc-plugins: consolidate on PASS_INFO macro gcc-plugins: add PASS_INFO and build_const_char_string()
2017-02-21Merge branch 'for-next/gcc-plugin/structleak' into for-linus/gcc-pluginsKees Cook4-1/+277
2017-02-21Merge branch 'for-next/gcc-plugin-infrastructure' into for-linus/gcc-pluginsKees Cook4-28/+49
2017-02-21Merge tag 'rodata-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds33-109/+90
Pull rodata updates from Kees Cook: "This renames the (now inaccurate) DEBUG_RODATA and related SET_MODULE_RONX configs to the more sensible STRICT_KERNEL_RWX and STRICT_MODULE_RWX" * tag 'rodata-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common
2017-02-21Merge tag 'usercopy-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds1-14/+103
Pull usercopy test updates from Kees Cook: "This improves the usercopy tests: - check zeroing on failed copy_from_user()/get_user() (caught bug on ARM) - adjust tests for SMAP/PAN (can't zero userspace memory on failure)" * tag 'usercopy-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: usercopy: Add tests for all get_user() sizes usercopy: Adjust tests to deal with SMAP/PAN usercopy: add testcases to check zeroing on failure
2017-02-21Merge tag 'pstore-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds3-9/+15
Pull pstore updates from Kees Cook: "Minor changes to pstore tree: - update MAINTAINERS with current git repo, add more files. - move prz allocation checks into the walker - initialize flags correctly (by accident spinlock was technically ok)" * tag 'pstore-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: MAINTAINERS: Adjust pstore git repo URI, add files pstore: Check for prz allocation in walker pstore: Correctly initialize spinlock and flags
2017-02-21Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds1-1/+2
Pull HID fix from Jiri Kosina: "Regression fix for HID_RMI-driven synaptics touchpads in !CONFIG_HID_RMI cases" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: rmi: fallback to generic/multitouch if hid-rmi is not built
2017-02-21Merge branch 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds24-191/+612
Pull libata updates from Tejun Heo: - Bartlomiej added pata_falcon - Christoph is trying to remove use of static 4k buf. It's still WIP - config cleanup around HAS_DMA - other fixes and driver-specific changes * 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (29 commits) ata: pata_of_platform: using of_property_read_u32() helper pata_atiixp: Don't use unconnected secondary port on SB600/SB700 libata-sff: Don't scan disabled ports when checking for legacy mode. pata_octeon_cf: remove unused local variables from octeon_cf_set_piomode() ahci: qoriq: added ls2088a platforms support ahci: qoriq: report error when ecc register address is missing in dts ahci: qoriq: added a condition to enable dma coherence Revert "libata: switch to dynamic allocation instead of ata_scsi_rbuf" ahci: imx: fix building without hwmon or thermal ata: add Atari Falcon PATA controller driver ata: pass queued command to ->sff_data_xfer method ata: allow subsystem to be used on m68k arch libata: switch to dynamic allocation instead of ata_scsi_rbuf libata: don't call ata_scsi_rbuf_fill for command without a response buffer libata: call ->scsi_done from ata_scsi_simulate libata: remove the done callback from ata_scsi_args libata: move struct ata_scsi_args to libata-scsi.c libata: avoid global response buffer in atapi_qc_complete libata-eh: Use switch() instead of sparse array for protocol strings ata: sata_mv: Convert to devm_ioremap_resource() ...
2017-02-21Merge tag 'dmaengine-4.11-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds19-131/+338
Pull dmaengine updates from Vinod Koul: "This time we fairly boring and bit small update. - Support for Intel iDMA 32-bit hardware - deprecate broken support for channel switching in async_tx - bunch of updates on stm32-dma - Cyclic support for zx dma and making in generic zx dma driver - Small updates to bunch of other drivers" * tag 'dmaengine-4.11-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits) async_tx: deprecate broken support for channel switching dmaengine: rcar-dmac: Widen DMA mask to 40 bits dmaengine: sun6i: allow build on ARM64 platforms (sun50i) dmaengine: Provide a wrapper for memcpy operations dmaengine: zx: fix build warning dmaengine: dw: we do support Merrifield SoC in PCI mode dmaengine: dw: add support of iDMA 32-bit hardware dmaengine: dw: introduce register mappings for iDMA 32-bit dmaengine: dw: introduce block2bytes() and bytes2block() dmaengine: dw: extract dwc_chan_pause() for future use dmaengine: dw: replace convert_burst() with one liner dmaengine: dw: register IRQ and DMA pool with instance ID dmaengine: dw: Fix data corruption in large device to memory transfers dmaengine: ste_dma40: indicate granularity on channels dmaengine: ste_dma40: indicate directions on channels dmaengine: stm32-dma: Add error messages if xlate fails dmaengine: dw: pci: remove LPE Audio DMA ID dmaengine: stm32-dma: Add max_burst support dmaengine: stm32-dma: Add synchronization support dmaengine: stm32-dma: Fix residue computation issue in cyclic mode ...
2017-02-21Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds863-9025/+14505
Pull media updates from Mauro Carvalho Chehab: - new drivers: - i.MX6 Video Data Order Adapter's (VDOA) - Toshiba et8ek8 5MP sensor - STM DELTA multi-format video decoder V4L2 driver - SPI connected IR LED - Mediatek IR remote receiver - ZyDAS ZD1301 DVB USB interface driver - new RC keymaps - some very old LIRC drivers got removed from staging - RC core gained support encoding IR scan codes - DVB si2168 gained support for DVBv5 statistics - lirc_sir driver ported to rc-core and promoted from staging - other bug fixes, board additions and driver improvements * tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (230 commits) [media] mtk-vcodec: fix build warnings without DEBUG [media] zd1301: fix building interface driver without demodulator [media] usbtv: add sharpness control [media] cxusb: Use a dma capable buffer also for reading [media] ttpci: address stringop overflow warning [media] dvb-usb-v2: avoid use-after-free [media] add Hama Hybrid DVB-T Stick support [media] et8ek8: Fix compiler / Coccinelle warnings [media] media: fix semicolon.cocci warnings [media] media: exynos4-is: add flags to dummy Exynos IS i2c adapter [media] v4l: of: check for unique lanes in data-lanes and clock-lanes [media] coda/imx-vdoa: constify structs [media] st-delta: debug: trace stream/frame information & summary [media] st-delta: add mjpeg support [media] st-delta: EOS (End Of Stream) support [media] st-delta: rpmsg ipc support [media] st-delta: add memory allocator helper functions [media] st-delta: STiH4xx multi-format video decoder v4l2 driver [media] MAINTAINERS: add st-delta driver [media] ARM: multi_v7_defconfig: enable STMicroelectronics DELTA Support ...
2017-02-21Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds143-3931/+14077
Pull pin control updates from Linus Walleij: "Pin control bulk changes for the v4.11 kernel cycle. Core changes: - Switch the generic pin config argument from 16 to 24 bits, only use 8 bits for the configuration type. We might need to encode more information about a certain setting than we need to encode different generic settings. - Add a cross-talk API to the pin control GPIO back-end, utilizing pinctrl_gpio_set_config() from GPIO drivers that want to set up a certain pin configuration in the back-end. This also includes the .set_config() refactoring of the GPIO chips, so that they pass a generic configuration for things like debouncing and single ended (typically open drain). This change has also been merged in an immutable branch to the GPIO tree. - Take hogs with a delayed work, so that we finalize probing a pin controller before trying to get any hogs. - For pin controllers putting all group and function definitions into the device tree, we now have generic code to deal with this and it is used in two drivers so far. - Simplifications of the pin request conflict check. - Make dt_free_map() optional. Updates to drivers: - pinctrl-single now use the generic helpers to generate dynamic group and function tables from the device tree. - Texas Instruments IOdelay configuration driver add-on to pinctrl-single. - i.MX: use radix trees to store groups and functions, use the new generic group and function helpers to manage them. - Intel: add support for hardware debouncing and 1K pull-down. New subdriver for the Gemini Lake SoC. - Renesas SH-PFC: drive strength and bias support, CAN bus muxing, MSIOF, SDHI, HSCIF for r8a7796. Gyro-ADC supporton r8a7791. - Aspeed: use syscon cross-dependencies to set up related bits in the LPC host controller and display controller. - Aspeed: finalize G4 and G5 support. Fix mux configuration on GPIOs. Add banks Y, Z, AA, AB and AC. - AMD: support additional GPIO. - STM32: set this controller to strict muxing mode. STM32H743 MCU support. - Allwinner sunxi: deep simplifications on how to support subvariants of SoCs without adding to much SoC-specific data for each subvariant, especially for sun5i variants. New driver for V3s SoCs. New driver for the H5 SoC. Support A31/A31s variants with the new variant framework. - Mvebu: simplifications to use a MMIO and regmap abstraction. New subdrivers for the 98DX3236, 98DX5241 SoCs. - Samsung Exynos: delete Exynos4415 support. Add crosstalk to the SoC driver to access regmaps. Add infrastructure for pin-bank retention control. Clean out the pin retention control from arch/arm/mach-exynos and arch/arm/mach-s5p and put it properly in the Samsung pin control driver(s). - Meson: add HDMI HPD/DDC pins. Add pwm_ao_b pin. - Qualcomm: use raw spinlock variants: this makes the qualcomm driver realtime-safe" * tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (111 commits) pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data() pinctrl: intel: unlock on error in intel_config_set_pull() pinctrl: berlin: make bool drivers explicitly non-modular pinctrl: spear: make bool drivers explicitly non-modular pinctrl: mvebu: make bool drivers explicitly non-modular pinctrl: sunxi: make sun5i explicitly non-modular pinctrl: sunxi: Remove stray printk call in sun5i driver's probe function pinctrl: samsung: mark PM functions as __maybe_unused pinctrl: sunxi: Remove redundant A31s pinctrl driver pinctrl: sunxi: Support A31/A31s with pinctrl variants pinctrl: Amend bindings for STM32 pinctrl pinctrl: Add STM32 pinctrl driver DT bindings pinctrl: stm32: Add STM32H743 MCU support include: dt-bindings: Add STM32H7 pinctrl DT defines gpio: aspeed: Remove dependence on GPIOF_* macros pinctrl: stm32: fix bad location of gpiochip_lock_as_irq drivers: pinctrl: add driver for Allwinner H5 SoC pinctrl: intel: Add Intel Gemini Lake pin controller support pinctrl: intel: Add support for 1k additional pull-down pinctrl: intel: Add support for hardware debouncer ...
2017-02-22HID: rmi: fallback to generic/multitouch if hid-rmi is not builtJiri Kosina1-1/+2
Commit 279967a65b32 ("HID: rmi: Handle all Synaptics touchpads using hid-rmi") unconditionally switches over handling of all Synaptics touchpads to hid-rmi (to make use of extended features of the HW); in case CONFIG_HID_RMI is disabled though this renders the touchpad unusable, as the HID_DEVICE(HID_BUS_ANY, HID_GROUP_RMI, HID_ANY_ID, HID_ANY_ID) match doesn't exist and generic/multitouch doesn't bind to it either (due to hid group mismatch). Fix this by switching over to hid-rmi only if it has been actually built. Fixes: 279967a65b32 ("HID: rmi: Handle all Synaptics touchpads using hid-rmi") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-21Merge tag 'extable-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linuxLinus Torvalds40-51/+80
Pull exception table module split from Paul Gortmaker: "Final extable.h related changes. This completes the separation of exception table content from the module.h header file. This is achieved with the final commit that removes the one line back compatible change that sourced extable.h into the module.h file. The commits are unchanged since January, with the exception of a couple Acks that came in for the last two commits a bit later. The changes have been in linux-next for quite some time[1] and have got widespread arch coverage via toolchains I have and also from additional ones the kbuild bot has. Maintaners of the various arch were Cc'd during the postings to lkml[2] and informed that the intention was to take the remaining arch specific changes and lump them together with the final two non-arch specific changes and submit for this merge window. The ia64 diffstat stands out and probably warrants a mention. In an earlier review, Al Viro made a valid comment that the original header separation of content left something to be desired, and that it get fixed as a part of this change, hence the larger diffstat" * tag 'extable-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (21 commits) module.h: remove extable.h include now users have migrated core: migrate exception table users off module.h and onto extable.h cris: migrate exception table users off module.h and onto extable.h hexagon: migrate exception table users off module.h and onto extable.h microblaze: migrate exception table users off module.h and onto extable.h unicore32: migrate exception table users off module.h and onto extable.h score: migrate exception table users off module.h and onto extable.h metag: migrate exception table users off module.h and onto extable.h arc: migrate exception table users off module.h and onto extable.h nios2: migrate exception table users off module.h and onto extable.h sparc: migrate exception table users onto extable.h openrisc: migrate exception table users off module.h and onto extable.h frv: migrate exception table users off module.h and onto extable.h sh: migrate exception table users off module.h and onto extable.h xtensa: migrate exception table users off module.h and onto extable.h mn10300: migrate exception table users off module.h and onto extable.h alpha: migrate exception table users off module.h and onto extable.h arm: migrate exception table users off module.h and onto extable.h m32r: migrate exception table users off module.h and onto extable.h ia64: ensure exception table search users include extable.h ...
2017-02-21Merge tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mipsLinus Torvalds253-1030/+4091
Pull MIPS updates from James Hogan: "Here's the main MIPS pull request for 4.11. It contains a few new features such as IRQ stacks, cacheinfo support, and KASLR for Octeon CPUs, and a variety of smaller improvements and fixes including devicetree additions, kexec cleanups, microMIPS stack unwinding fixes, and a bunch of build fixes to clean up continuous integration builds. Its all been in linux-next for at least a couple of days, most of it far longer. Miscellaneous: - Add IRQ stacks - Add cacheinfo support - Add "uzImage.bin" zboot target - Unify performance counter definitions - Export various (mainly assembly) symbols alongside their definitions - Audit and remove unnecessary uses of module.h kexec & kdump: - Lots of improvements and fixes - Add correct copy_regs implementations - Add debug logging of new kernel information Security: - Use Makefile.postlink to insert relocations into vmlinux - Provide plat_post_relocation hook (used for Octeon KASLR) - Add support for tuning mmap randomisation - Relocate DTB microMIPS: - A load of unwind fixes - Add some missing .insn to fix link errors MIPSr6: - Fix MULTU/MADDU/MSUBU sign extension in r2 emulation - Remove r2_emul_return and use ERETNC unconditionally on MIPSr6 - Allow pre-r6 emulation on SMP MIPSr6 kernels Cache management: - Treat physically indexed dcache as non-aliasing - Add return errors to protected cache ops for KVM - CM3: Ensure L1 & L2 cache ECC checking matches - CM3: Indicate inclusive caches - I6400: Treat dcache as physically indexed Memory management: - Ensure bootmem doesn't corrupt reserved memory - Export some TLB exception generation functions for KVM OF: - NULL check initial_boot_params before use in of_scan_flat_dt() - Fix unaligned access in of_alias_scan() SMP: - CPS: Don't BUG if a CPU fails to start Other fixes: - Fix longstanding 64-bit IP checksum carry bug - Fix KERN_CONT fallout in cpu-bugs64.c and sync-r4k.c - Update defconfigs for NF_CT_PROTO_DCCP, DPLITE, CPU_FREQ_STAT,SCSI_DH changes - Disable certain builtin compiler options, stack-check (whole kernel), asynchronous-unwind-tables (VDSO). - A bunch of build fixes from kernelci.org testing - Various other minor cleanups & corrections BMIPS: - Migrate interrupts during bmips_cpu_disable - BCM47xx: Add Luxul devices - BCM47xx: Fix Asus WL-500W button inversion - BCM7xxx: Add SPI device nodes Generic (multiplatform): - Add kexec DTB passing - Fix big endian - Add cpp_its_S in ksym_dep_filter to silence build warning IP22: - Reformat inline assembler code to modern standards - Fix binutils 2.25 build error IP27: - Fix duplicate CAC_BASE definition build error - Disable qlge driver to workaround broken compiler Lantiq: - Refresh defconfig and activate more drivers - Lock DMA register access - Fix cascading IRQ setup - Fix build of VPE loader - xway: Fix ethernet packet header corruption over reboot Loongson1 - Add watchdog support - 1B: Reduce DEFAULT_MEMSIZE to 64MB - 1B: Change OSC clock name to match rest of kernel - 1C: Remove ARCH_WANT_OPTIONAL_GPIOLIB Octeon: - Add KASLR support - Support Octeon III USB controller - Fix large copy_from_user corner case - Enable devtmpfs in defconfig Netlogic: - Fix non-default XLR build error due to netlogic,xlp-pic code - Fix assembler warning from smpboot.S pic32mzda: - Fix linker error when early printk is disabled Pistachio: - Add base device tree - Add Ci40 "Marduk" device tree Ralink: - Support raw appended DTB - Add missing I2C & I2S clocks - Add missing pinmux and fix pinmux function name typo - Add missing clk_round_rate() - Clean up prom_init() - MT7621: Set SoC type - MT7621: Support highmem TXx9: - Modernize printing of kernel messages and resolve KERN_CONT fallout - 7segled: use permission-specific DEVICE_ATTR variants XilFPGA: - Add IRQ controller and UART IRQ - Add AXI I2C and emaclite to DT & defconfig" * tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (148 commits) MIPS: VDSO: Explicitly use -fno-asynchronous-unwind-tables MIPS: BCM47XX: Fix button inversion for Asus WL-500W MIPS: DTS: Add img directory to Makefile MIPS: ip27: Disable qlge driver in defconfig MIPS: pic32mzda: Fix linker error for pic32_get_pbclk() MIPS: Lantiq: Keep ethernet enabled during boot MIPS: OCTEON: Fix copy_from_user fault handling for large buffers MIPS: Fix special case in 64 bit IP checksumming. MIPS: OCTEON: Enable DEVTMPFS MIPS: lantiq: Set physical_memsize MIPS: sysmips: Remove duplicated include from syscall.c Kbuild: Add cpp_its_S in ksym_dep_filter MIPS: Audit and remove any unnecessary uses of module.h MIPS: Unify perf counter register definitions MIPS: Disable stack checks on MIPS kernels MIPS: OCTEON: Platform support for OCTEON III USB controller MIPS: Lantiq: Fix cascaded IRQ setup MIPS: sync-r4k: Fix KERN_CONT fallout MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch MIPS: Fix distclean with Makefile.postlink ...
2017-02-21Merge tag 'for-linus-4.11-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds49-967/+1726
Pull xen updates from Juergen Gross: "Xen features and fixes: - a series from Boris Ostrovsky adding support for booting Linux as Xen PVH guest - a series from Juergen Gross streamlining the xenbus driver - a series from Paul Durrant adding support for the new device model hypercall - several small corrections" * tag 'for-linus-4.11-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/privcmd: add IOCTL_PRIVCMD_RESTRICT xen/privcmd: Add IOCTL_PRIVCMD_DM_OP xen/privcmd: return -ENOTTY for unimplemented IOCTLs xen: optimize xenbus driver for multiple concurrent xenstore accesses xen: modify xenstore watch event interface xen: clean up xenbus internal headers xenbus: Neaten xenbus_va_dev_error xen/pvh: Use Xen's emergency_restart op for PVH guests xen/pvh: Enable CPU hotplug xen/pvh: PVH guests always have PV devices xen/pvh: Initialize grant table for PVH guests xen/pvh: Make sure we don't use ACPI_IRQ_MODEL_PIC for SCI xen/pvh: Bootstrap PVH guest xen/pvh: Import PVH-related Xen public interfaces xen/x86: Remove PVH support x86/boot/32: Convert the 32-bit pgtable setup code from assembly to C xen/manage: correct return value check on xenbus_scanf() x86/xen: Fix APIC id mismatch warning on Intel xen/netback: set default upper limit of tx/rx queues to 8 xen/netfront: set default upper limit of tx/rx queues to 8
2017-02-21Merge branch 'stable-4.11' of git://git.infradead.org/users/pcmoore/auditLinus Torvalds7-20/+96
Pull audit updates from Paul Moore: "The audit changes for v4.11 are relatively small compared to what we did for v4.10, both in terms of size and impact. - two patches from Steve tweak the formatting for some of the audit records to make them more consistent with other audit records. - three patches from Richard record the name of a module on module load, fix the logging of sockaddr information when using socketcall() on 32-bit systems, and add the ability to reset audit's lost record counter. - my lone patch just fixes an annoying style nit that I was reminded about by one of Richard's patches. All these patches pass our test suite" * 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit: audit: remove unnecessary curly braces from switch/case statements audit: log module name on init_module audit: log 32-bit socketcalls audit: add feature audit_lost reset audit: Make AUDIT_ANOM_ABEND event normalized audit: Make AUDIT_KERNEL event conform to the specification
2017-02-21Revert "ath10k: Search SMBIOS for OEM board file extension"Kalle Valo2-100/+3
This reverts commit f2593cb1b29185d38db706cbcbe22ed538720ae1. Paul reported that this patch with older board-2.bin ath10k initialisation fails on Dell XPS 13: ath10k_pci 0000:3a:00.0: failed to fetch board data for bus=pci,vendor=168c, device=003e,subsystem-vendor=1a56,subsystem-device=1535,variant=RV_0520 from ath10k/QCA6174/hw3.0/board-2.bin The reason is that the older board-2.bin does not have the variant version of the image name and ath10k does not fallback to the older naming scheme. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=185621#c9 Fixes: f2593cb1b291 ("ath10k: Search SMBIOS for OEM board file extension") Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds86-2250/+4276
Pull security layer updates from James Morris: "Highlights: - major AppArmor update: policy namespaces & lots of fixes - add /sys/kernel/security/lsm node for easy detection of loaded LSMs - SELinux cgroupfs labeling support - SELinux context mounts on tmpfs, ramfs, devpts within user namespaces - improved TPM 2.0 support" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (117 commits) tpm: declare tpm2_get_pcr_allocation() as static tpm: Fix expected number of response bytes of TPM1.2 PCR Extend tpm xen: drop unneeded chip variable tpm: fix misspelled "facilitate" in module parameter description tpm_tis: fix the error handling of init_tis() KEYS: Use memzero_explicit() for secret data KEYS: Fix an error code in request_master_key() sign-file: fix build error in sign-file.c with libressl selinux: allow changing labels for cgroupfs selinux: fix off-by-one in setprocattr tpm: silence an array overflow warning tpm: fix the type of owned field in cap_t tpm: add securityfs support for TPM 2.0 firmware event log tpm: enhance read_log_of() to support Physical TPM event log tpm: enhance TPM 2.0 PCR extend to support multiple banks tpm: implement TPM 2.0 capability to get active PCR banks tpm: fix RC value check in tpm2_seal_trusted tpm_tis: fix iTPM probe via probe_itpm() function tpm: Begin the process to deprecate user_read_timer tpm: remove tpm_read_index and tpm_write_index from tpm.h ...
2017-02-21Merge tag 'dm-4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds18-227/+875
Pull device mapper updates from Mike Snitzer: - Fix dm-raid transient device failure processing and other smaller tweaks. - Add journal support to the DM raid target to close the 'write hole' on raid 4/5/6. - Fix dm-cache corruption, due to rounding bug, when cache exceeds 2TB. - Add 'metadata2' feature to dm-cache to separate the dirty bitset out from other cache metadata. This improves speed of shutting down a large cache device (which implies writing out dirty bits). - Fix a memory leak during dm-stats data structure destruction. - Fix a DM multipath round-robin path selector performance regression that was caused by less precise balancing across all paths. - Lastly, introduce a DM core fix for a long-standing DM snapshot deadlock that is rooted in the complexity of the device stack used in conjunction with block core maintaining bios on current->bio_list to manage recursion in generic_make_request(). A more comprehensive fix to block core (and its hook in the cpu scheduler) would be wonderful but this DM-specific fix is pragmatic considering how difficult it has been to make progress on a generic fix. * tag 'dm-4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits) dm: flush queued bios when process blocks to avoid deadlock dm round robin: revert "use percpu 'repeat_count' and 'current_path'" dm stats: fix a leaked s->histogram_boundaries array dm space map metadata: constify dm_space_map structures dm cache metadata: use cursor api in blocks_are_clean_separate_dirty() dm persistent data: add cursor skip functions to the cursor APIs dm cache metadata: use dm_bitset_new() to create the dirty bitset in format 2 dm bitset: add dm_bitset_new() dm cache metadata: name the cache block that couldn't be loaded dm cache metadata: add "metadata2" feature dm cache metadata: use bitset cursor api to load discard bitset dm bitset: introduce cursor api dm btree: use GFP_NOFS in dm_btree_del() dm space map common: memcpy the disk root to ensure it's arch aligned dm block manager: add unlikely() annotations on dm_bufio error paths dm cache: fix corruption seen when using cache > 2TB dm raid: cleanup awkward branching in raid_message() option processing dm raid: use mddev rather than rdev->mddev dm raid: use read_disk_sb() throughout dm raid: add raid4/5/6 journaling support ...
2017-02-21Merge tag 'mmc-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds114-1818/+2591
Pull MMC updates from Ulf Hansson: "MMC core: - Add support for Marvell SD8787 Wifi/BT chip - Improve UHS support for SDIO - Invent MMC_CAP_3_3V_DDR and a DT binding for eMMC DDR 3.3V mode - Detect Auto BKOPS enable bit - Export eMMC device lifetime information through sysfs - First take to slim down the public mmc headers to avoid abuse - Re-factoring of the mmc block device driver to prepare for blkmq - Cleanup code for the mmc block device driver - Clarify and cleanup code dealing with data requests - Cleanup some code by converting to ida_simple_ functions - Cleanup code dealing with card quirks - Cleanup private and public mmc header files MMC host: - Don't rely on public mmc headers to include non-mmc related headers - meson: Add support for eMMC HS400 mode - meson: Various cleanups and improvements - omap_hsmmc: Use the proper provided busy timeout from the core - sunxi: Enable new timings for the A64 MMC controllers - sunxi: Improvements for clock management - tmio: Improvements for SDIO interrupts - mxs-mmc: Add CMD23 support - sdhci-msm: Enable HS400 enhanced strobe mode support - sdhci-msm: Correct HS400 tuning sequence - sdhci-acpi: Support deferred probe - sdhci-pci: Add support for eMMC HS200 tuning mode on AMD - mediatek: Correct the implementation of card busy detection - dw_mmc: Initial support for ZX mmc controller - sh_mobile_sdhi: Enable support for eMMC HS200 mode - sh_mmcif: Various cleanups and improvements" * tag 'mmc-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (145 commits) mmc: core: add mmc prefix for blk_fixups mmc: core: move all quirks together into quirks.h mmc: core: improve the quirks for sdio devices mmc: core: move some sdio IDs out of quirks file mmc: core: change quirks.c to be a header file mmc: sdhci-cadence: fix bit shift of read data from PHY port mmc: Adding AUTO_BKOPS_EN bit set for Auto BKOPS support mmc: MAN_BKOPS_EN inverse debug message logic mmc: meson-gx: add support for HS400 mode mmc: meson-gx: remove unneeded checks in remove mmc: meson-gx: reduce bounce buffer size mmc: meson-gx: set max block count and request size mmc: meson-gx: improve interrupt handling mmc: meson-gx: improve meson_mmc_irq_thread mmc: meson-gx: improve meson_mmc_clk_set mmc: meson-gx: minor improvements in meson_mmc_set_ios mmc: meson: Assign the minimum clk rate as close to 400KHz as possible mmc: core: start to break apart mmc_start_areq() mmc: block: respect bool returned from blk_end_request() mmc: block: return errorcode from mmc_sd_num_wr_blocks() ...
2017-02-21usercopy: Add tests for all get_user() sizesKees Cook1-13/+76
The existing test was only exercising native unsigned long size get_user(). For completeness, we should check all sizes. But we must skip some 32-bit architectures that don't implement a 64-bit get_user(). These new tests actually uncovered a bug in ARM's 64-bit get_user() zeroing. Signed-off-by: Kees Cook <keescook@chromium.org>
2017-02-21Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds129-3928/+9294
Pull SCSI updates from James Bottomley: "This update includes the usual round of major driver updates (ncr5380, ufs, lpfc, be2iscsi, hisi_sas, storvsc, cxlflash, aacraid, megaraid_sas, ...). There's also an assortment of minor fixes and the major update of switching a bunch of drivers to pci_alloc_irq_vectors from Christoph" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (188 commits) scsi: megaraid_sas: handle dma_addr_t right on 32-bit scsi: megaraid_sas: array overflow in megasas_dump_frame() scsi: snic: switch to pci_irq_alloc_vectors scsi: megaraid_sas: driver version upgrade scsi: megaraid_sas: Change RAID_1_10_RMW_CMDS to RAID_1_PEER_CMDS and set value to 2 scsi: megaraid_sas: Indentation and smatch warning fixes scsi: megaraid_sas: Cleanup VD_EXT_DEBUG and SPAN_DEBUG related debug prints scsi: megaraid_sas: Increase internal command pool scsi: megaraid_sas: Use synchronize_irq to wait for IRQs to complete scsi: megaraid_sas: Bail out the driver load if ld_list_query fails scsi: megaraid_sas: Change build_mpt_mfi_pass_thru to return void scsi: megaraid_sas: During OCR, if get_ctrl_info fails do not continue with OCR scsi: megaraid_sas: Do not set fp_possible if TM capable for non-RW syspdIO, change fp_possible to bool scsi: megaraid_sas: Remove unused pd_index from megasas_build_ld_nonrw_fusion scsi: megaraid_sas: megasas_return_cmd does not memset IO frame to zero scsi: megaraid_sas: max_fw_cmds are decremented twice, remove duplicate scsi: megaraid_sas: update can_queue only if the new value is less scsi: megaraid_sas: Change max_cmd from u32 to u16 in all functions scsi: megaraid_sas: set pd_after_lb from MR_BuildRaidContext and initialize pDevHandle to MR_DEVHANDLE_INVALID scsi: megaraid_sas: latest controller OCR capability from FW before sending shutdown DCMD ...
2017-02-21Merge tag 'for-4.11/linus-merge-signed' of git://git.kernel.dk/linux-blockLinus Torvalds203-5577/+9729
Pull block layer updates from Jens Axboe: - blk-mq scheduling framework from me and Omar, with a port of the deadline scheduler for this framework. A port of BFQ from Paolo is in the works, and should be ready for 4.12. - Various fixups and improvements to the above scheduling framework from Omar, Paolo, Bart, me, others. - Cleanup of the exported sysfs blk-mq data into debugfs, from Omar. This allows us to export more information that helps debug hangs or performance issues, without cluttering or abusing the sysfs API. - Fixes for the sbitmap code, the scalable bitmap code that was migrated from blk-mq, from Omar. - Removal of the BLOCK_PC support in struct request, and refactoring of carrying SCSI payloads in the block layer. This cleans up the code nicely, and enables us to kill the SCSI specific parts of struct request, shrinking it down nicely. From Christoph mainly, with help from Hannes. - Support for ranged discard requests and discard merging, also from Christoph. - Support for OPAL in the block layer, and for NVMe as well. Mainly from Scott Bauer, with fixes/updates from various others folks. - Error code fixup for gdrom from Christophe. - cciss pci irq allocation cleanup from Christoph. - Making the cdrom device operations read only, from Kees Cook. - Fixes for duplicate bdi registrations and bdi/queue life time problems from Jan and Dan. - Set of fixes and updates for lightnvm, from Matias and Javier. - A few fixes for nbd from Josef, using idr to name devices and a workqueue deadlock fix on receive. Also marks Josef as the current maintainer of nbd. - Fix from Josef, overwriting queue settings when the number of hardware queues is updated for a blk-mq device. - NVMe fix from Keith, ensuring that we don't repeatedly mark and IO aborted, if we didn't end up aborting it. - SG gap merging fix from Ming Lei for block. - Loop fix also from Ming, fixing a race and crash between setting loop status and IO. - Two block race fixes from Tahsin, fixing request list iteration and fixing a race between device registration and udev device add notifiations. - Double free fix from cgroup writeback, from Tejun. - Another double free fix in blkcg, from Hou Tao. - Partition overflow fix for EFI from Alden Tondettar. * tag 'for-4.11/linus-merge-signed' of git://git.kernel.dk/linux-block: (156 commits) nvme: Check for Security send/recv support before issuing commands. block/sed-opal: allocate struct opal_dev dynamically block/sed-opal: tone down not supported warnings block: don't defer flushes on blk-mq + scheduling blk-mq-sched: ask scheduler for work, if we failed dispatching leftovers blk-mq: don't special case flush inserts for blk-mq-sched blk-mq-sched: don't add flushes to the head of requeue queue blk-mq: have blk_mq_dispatch_rq_list() return if we queued IO or not block: do not allow updates through sysfs until registration completes lightnvm: set default lun range when no luns are specified lightnvm: fix off-by-one error on target initialization Maintainers: Modify SED list from nvme to block Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN uapi: sed-opal fix IOW for activate lsp to use correct struct cdrom: Make device operations read-only elevator: fix loading wrong elevator type for blk-mq devices cciss: switch to pci_irq_alloc_vectors block/loop: fix race between I/O and set_status blk-mq-sched: don't hold queue_lock when calling exit_icq block: set make_request_fn manually in blk_mq_update_nr_hw_queues ...
2017-02-21sched/core: Fix build paravirt build on arm and arm64Mark Brown1-0/+3
Commit 004172bdad64 ("sched/core: Remove unnecessary #include headers") removed the inclusion of asm/paravirt.h which is used to get declarations of paravirt_steal_rq_enabled and paravirt_steal_clock. It is implicitly included on x86 but not on arm and arm64 breaking the build if paravirtualization is used. Since things from that header are used directly fix the build by putting the direct inclusion back. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-21net: socket: fix recvmmsg not returning error from sock_errorMaxime Jayat1-1/+3
Commit 34b88a68f26a ("net: Fix use after free in the recvmmsg exit path"), changed the exit path of recvmmsg to always return the datagrams variable and modified the error paths to set the variable to the error code returned by recvmsg if necessary. However in the case sock_error returned an error, the error code was then ignored, and recvmmsg returned 0. Change the error path of recvmmsg to correctly return the error code of sock_error. The bug was triggered by using recvmmsg on a CAN interface which was not up. Linux 4.6 and later return 0 in this case while earlier releases returned -ENETDOWN. Fixes: 34b88a68f26a ("net: Fix use after free in the recvmmsg exit path") Signed-off-by: Maxime Jayat <maxime.jayat@mobile-devices.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21bnxt_en: use eth_hw_addr_random()Tobias Klauser1-1/+1
Use eth_hw_addr_random() to set a random MAC address in order to make sure bp->dev->addr_assign_type will be properly set to NET_ADDR_RANDOM. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21Merge branch 'bpf-unlocking-fix'David S. Miller9-5/+22
Daniel Borkmann says: ==================== BPF fix with regards to unlocking This set fixes the issue Eric was reporting recently [1]. First patch is a prerequisite discussed with Laura that is needed for the later fix in the second one. I've tested this extensively and it does not reproduce anymore on my side after the fix. Thanks & sorry about that! [1] https://www.spinics.net/lists/netdev/msg421877.html ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21bpf: fix unlocking of jited image when module ronx not setDaniel Borkmann4-5/+14
Eric and Willem reported that they recently saw random crashes when JIT was in use and bisected this to 74451e66d516 ("bpf: make jited programs visible in traces"). Issue was that the consolidation part added bpf_jit_binary_unlock_ro() that would unlock previously made read-only memory back to read-write. However, DEBUG_SET_MODULE_RONX cannot be used for this to test for presence of set_memory_*() functions. We need to use ARCH_HAS_SET_MEMORY instead to fix this; also add the corresponding bpf_jit_binary_lock_ro() to filter.h. Fixes: 74451e66d516 ("bpf: make jited programs visible in traces") Reported-by: Eric Dumazet <edumazet@google.com> Reported-by: Willem de Bruijn <willemb@google.com> Bisected-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21arch: add ARCH_HAS_SET_MEMORY configDaniel Borkmann5-0/+8
Currently, there's no good way to test for the presence of set_memory_ro/rw/x/nx() helpers implemented by archs such as x86, arm, arm64 and s390. There's DEBUG_SET_MODULE_RONX and DEBUG_RODATA, however both don't really reflect that: set_memory_*() are also available even when DEBUG_SET_MODULE_RONX is turned off, and DEBUG_RODATA is set by parisc, but doesn't implement above functions. Thus, add ARCH_HAS_SET_MEMORY that is selected by mentioned archs, where generic code can test against this. This also allows later on to move DEBUG_SET_MODULE_RONX out of the arch specific Kconfig to define it only once depending on ARCH_HAS_SET_MEMORY. Suggested-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: napi_watchdog() can use napi_schedule_irqoff()Eric Dumazet1-1/+1
hrtimer handlers run with masked hard IRQ, we can therefore use napi_schedule_irqoff() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21tcp: Revert "tcp: tcp_probe: use spin_lock_bh()"Eric Dumazet1-2/+2
This reverts commit e70ac171658679ecf6bea4bbd9e9325cd6079d2b. jtcp_rcv_established() is in fact called with hard irq being disabled. Initial bug report from Ricardo Nabinger Sanchez [1] still needs to be investigated, but does not look like a TCP bug. [1] https://www.spinics.net/lists/netdev/msg420960.html Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: kernel test robot <xiaolong.ye@intel.com> Cc: Ricardo Nabinger Sanchez <rnsanchez@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net/hsr: use eth_hw_addr_random()Tobias Klauser1-1/+1
Use eth_hw_addr_random() to set a random MAC address in order to make sure dev->addr_assign_type will be properly set to NET_ADDR_RANDOM. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21Merge branch 'mvpp2-next'David S. Miller2-87/+128
Thomas Petazzoni says: ==================== net: mvpp2: misc improvements and preparation patches This series contains a number of fixes, misc improvements and preparation patches for an upcoming series that adds support for the new PPv2.2 network controller to the mvpp2 driver. The most significant improvements are: - Switching to using build_skb(), which is necessary for the upcoming PPv2.2 support, but anyway a good improvement to the current mvpp2 driver (supporting PPv2.1). - Making the driver build on 64-bit platforms. Changes since v3: - Addition of a patch "net: mvpp2: fix DMA address calculation in mvpp2_txq_inc_put()", which fixes a bug in the driver in the calculation of DMA addresses. This bug was found using DMA_API_DEBUG. - Modify the "net: mvpp2: switch to build_skb() in the RX path" patch to recalculate the fragment size when the MTU is changed in mvpp2_bm_update_mtu(). - Added Acked-by from Russell King on all patches, except: * "net: mvpp2: fix DMA address calculation in mvpp2_txq_inc_put()", because it's a new patch * "net: mvpp2: switch to build_skb() in the RX path" because I modified it since the v3. - Rebased on top of 4.10. Changes since v2: - Fix remaining 64-bit build warning, reported by David Miller. - Adjust how bit mask related definitions are done in "net: mvpp2: simplify MVPP2_PRS_RI_* definitions" according to Russell King suggestions. - Add a patch "net: mvpp2: remove useless arguments in mvpp2_rx_{pkts,time}_coal_set", suggested by Russell King. - Rework mvpp2_rx_time_coal_set() implementation to avoid overflows and rounding errors. I've used the implementation suggested by Russell King. Changes since v1: - This series is split as a separate series from the larger patch set adding support for PPv2.2 in the mvpp2 driver, as requested by David Miller. - Rebased on top of v4.10-rc1. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: enable building on 64-bit platformsThomas Petazzoni2-15/+19
The mvpp2 is going to be extended to support the Marvell Armada 7K/8K platform, which is ARM64. As a preparation to this work, this commit enables building the mvpp2 driver on ARM64, by: - Adjusting the Kconfig dependency - Fixing the types used in the driver so that they are 32/64-bits compliant. We use dma_addr_t for DMA addresses, and unsigned long for virtual addresses. It is worth mentioning that after this commit, the driver is for now still only used on 32-bits platforms, and will only work on 32-bits platforms. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: switch to build_skb() in the RX pathThomas Petazzoni1-22/+57
This commit adapts the mvpp2 RX path to use the build_skb() method. Not only build_skb() is now the recommended mechanism, but it also simplifies the addition of support for the PPv2.2 variant. Indeed, without build_skb(), we have to keep track for each RX descriptor of the physical address of the packet buffer, and the virtual address of the SKB. However, in PPv2.2 running on 64 bits platform, there is not enough space in the descriptor to store the virtual address of the SKB. So having to take care only of the address of the packet buffer, and building the SKB upon reception helps in supporting PPv2.2. The implementation is fairly straightforward: - mvpp2_skb_alloc() is renamed to mvpp2_buf_alloc() and no longer allocates a SKB. Instead, it allocates a buffer using the new mvpp2_frag_alloc() function, with enough space for the data and SKB. - The initialization of the RX buffers in mvpp2_bm_bufs_add() as well as the refill of the RX buffers in mvpp2_rx_refill() is adjusted accordingly. - Finally, the mvpp2_rx() is modified to use build_skb(). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: simplify MVPP2_PRS_RI_* definitionsThomas Petazzoni1-8/+8
Some of the MVPP2_PRS_RI_* definitions use the ~(value) syntax, which doesn't compile nicely on 64-bit. Moreover, those definitions are in fact unneeded, since they are always used in combination with a bit mask that ensures only the appropriate bits are modified. Therefore, such definitions should just be set to 0x0. In addition, as suggested by Russell King, we change the _MASK definitions to also use the BIT() macro so that it is clear they are related to the values defined afterwards. For example: #define MVPP2_PRS_RI_L2_CAST_MASK 0x600 #define MVPP2_PRS_RI_L2_UCAST ~(BIT(9) | BIT(10)) #define MVPP2_PRS_RI_L2_MCAST BIT(9) #define MVPP2_PRS_RI_L2_BCAST BIT(10) becomes #define MVPP2_PRS_RI_L2_CAST_MASK (BIT(9) | BIT(10)) #define MVPP2_PRS_RI_L2_UCAST 0x0 #define MVPP2_PRS_RI_L2_MCAST BIT(9) #define MVPP2_PRS_RI_L2_BCAST BIT(10) Because the values (MVPP2_PRS_RI_L2_UCAST, MVPP2_PRS_RI_L2_MCAST and MVPP2_PRS_RI_L2_BCAST) are always applied with MVPP2_PRS_RI_L2_CAST_MASK, and therefore there is no need for MVPP2_PRS_RI_L2_UCAST to be defined as ~(BIT(9) | BIT(10)). It fixes the following warnings when building the driver on a 64-bit platform (which is not possible as of this commit, but will be enabled in a follow-up commit): drivers/net/ethernet/marvell/mvpp2.c: In function ‘mvpp2_prs_mac_promisc_set’: drivers/net/ethernet/marvell/mvpp2.c:524:33: warning: large integer implicitly truncated to unsigned type [-Woverflow] #define MVPP2_PRS_RI_L2_UCAST ~(BIT(9) | BIT(10)) ^ drivers/net/ethernet/marvell/mvpp2.c:1459:33: note: in expansion of macro ‘MVPP2_PRS_RI_L2_UCAST’ mvpp2_prs_sram_ri_update(&pe, MVPP2_PRS_RI_L2_UCAST, Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULTThomas Petazzoni1-1/+1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: remove unused register definitionsThomas Petazzoni1-4/+0
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: simplify mvpp2_bm_bufs_add()Thomas Petazzoni1-3/+1
The mvpp2_bm_bufs_add() currently creates a fake cookie by calling mvpp2_bm_cookie_pool_set(), just to be able to call mvpp2_pool_refill(). But all what mvpp2_pool_refill() does is extract the pool ID from the cookie, and call mvpp2_bm_pool_put() with this ID. Instead of doing this convoluted thing, just call mvpp2_bm_pool_put() directly, since we have the BM pool ID. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: drop useless fields in mvpp2_bm_pool and related codeThomas Petazzoni1-15/+3
This commit drops dead code from the mvpp2 driver. The 'in_use' and 'in_use_thresh' fields of 'struct mvpp2_bm_pool' are incremented/decremented/initialized in various places. But they are only used in one place: if (is_recycle && (atomic_read(&bm_pool->in_use) < bm_pool->in_use_thresh)) return 0; However 'is_recycle', passed as argument to mvpp2_rx_refill() is always false. So in fact, this code is never reached, and the 'is_recycle' argument is useless. So let's drop this code. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'Thomas Petazzoni1-3/+0
This commit remove a field of 'struct mvpp2_tx_queue' that is not used anywhere. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: release reference to txq_cpu[] entry after unmappingThomas Petazzoni1-5/+4
The mvpp2_txq_bufs_free() function is called upon TX completion to DMA unmap TX buffers, and free the corresponding SKBs. It gets the references to the SKB to free and the DMA buffer to unmap from a per-CPU txq_pcpu data structure. However, the code currently increments the pointer to the next entry before doing the DMA unmap and freeing the SKB. It does not cause any visible problem because for a given SKB the TX completion is guaranteed to take place on the CPU where the TX was started. However, it is much more logical to increment the pointer to the next entry once the current entry has been completely unmapped/released. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()Thomas Petazzoni1-2/+29
When configuring the MVPP2_ISR_RX_THRESHOLD_REG with the RX coalescing time threshold, we do not check for the maximum allowed value supported by the driver, which means we might overflow and use a bogus value. This commit adds a check for this situation, and if a value higher than what is supported by the hardware is provided, then we use the maximum value supported by the hardware. In order to achieve this in a way that avoids overflow and rounding errors, we introduce two utility functions mvpp2_usec_to_cycles() and cycles_to_usec(). Many thanks to Russell King for suggesting this implementation. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()Thomas Petazzoni1-3/+4
Currently, mvpp2_rx_pkts_coal_set() does the following to avoid setting a too large value for the RX coalescing by packet number: val = (pkts & MVPP2_OCCUPIED_THRESH_MASK); This means that if you set a value that is slightly higher the the maximum number of packets, you in fact get a very low value. It makes a lot more sense to simply check if the value is too high, and if it's too high, limit it to the maximum possible value. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_setThomas Petazzoni1-12/+8
As noticed by Russell King, the last argument of mvpp2_rx_{pkts,time}_coal_set() is useless, since the packet/time coalescing value is already stored in the 'struct mvpp2_rx_queue *' passed as argument to these functions. So passing the packet/time value as an additional argument, and setting them again in the mvpp2_rx_queue structure is useles. This commit therefore gets rid of this additional argument, assuming the caller has assigned the appropriate value to rxq->pkts_coal or rxq->time_coal before calling the respective functions. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: fix DMA address calculation in mvpp2_txq_inc_put()Thomas Petazzoni1-1/+1
When TX descriptors are filled in, the buffer DMA address is split between the tx_desc->buf_phys_addr field (high-order bits) and tx_desc->packet_offset field (5 low-order bits). However, when we re-calculate the DMA address from the TX descriptor in mvpp2_txq_inc_put(), we do not take tx_desc->packet_offset into account. This means that when the DMA address is not aligned on a 32 bytes boundary, we end up calling dma_unmap_single() with a DMA address that was not the one returned by dma_map_single(). This inconsistency is detected by the kernel when DMA_API_DEBUG is enabled. We fix this problem by properly calculating the DMA address in mvpp2_txq_inc_put(). Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21macsec: fix validation failed in asynchronous operation.Lee Ryder1-0/+3
MACSec test failed when asynchronous crypto operations is used. It encounters packet validation failed since macsec_skb_cb(skb)->valid is always 'false'. This patch adds missing "macsec_skb_cb(skb)->valid = true" in macsec_decrypt_done() when "err == 0". Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: sock: Use USEC_PER_SEC macro instead of literal 1000000Gao Feng1-3/+3
The USEC_PER_SEC is used once in sock_set_timeout as the max value of tv_usec. But there are other similar codes which use the literal 1000000 in this file. It is minor cleanup to keep consitent. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>