| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When FW floods the driver with control messages try to exit the cmsg
processing loop every now and then to avoid soft lockups. Cmsg
processing is generally very lightweight so 512 seems like a reasonable
budget, which should not be exceeded under normal conditions.
Fixes: 77ece8d5f196 ("nfp: add control vNIC datapath")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Tested-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing
continuation lines") regression with the `declance' driver, which caused
the adapter identification message to be split between two lines, e.g.:
declance.c: v0.011 by Linux MIPS DECstation task force
tc6: PMAD-AA
, addr = 08:00:2b:1b:2a:6a, irq = 14
tc6: registered as eth0.
Address that properly, by printing identification with a single call,
making the messages now look like:
declance.c: v0.011 by Linux MIPS DECstation task force
tc6: PMAD-AA, addr = 08:00:2b:1b:2a:6a, irq = 14
tc6: registered as eth0.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Fixes: 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During certain heavy network loads TX could time out
with TX ring dump.
TX is sometimes never restarted after reaching
"tx_stop_threshold" because function "fec_enet_tx_queue"
only tests the first queue.
In addition the TX timeout callback function failed to
recover because it also operated only on the first queue.
Signed-off-by: Rickard x Andersson <rickaran@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some of the chip-specific hw_start functions set bit TXCFG_AUTO_FIFO
in register TxConfig. The original patch changed the order of some
calls resulting in these changes being overwritten by
rtl_set_tx_config_registers() in rtl_hw_start(). This eventually
resulted in network stalls especially under high load.
Analyzing the chip-specific hw_start functions all chip version from
34, with the exception of version 39, need this bit set.
This patch moves setting this bit to rtl_set_tx_config_registers().
Fixes: 4fd48c4ac0a0 ("r8169: move common initializations to tp->hw_start")
Reported-by: Ortwin Glück <odi@odi.ch>
Reported-by: David Arendt <admin@prnet.org>
Root-caused-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Tested-by: Tony Atkinson <tatkinson@linux.com>
Tested-by: David Arendt <admin@prnet.org>
Tested-by: Ortwin Glück <odi@odi.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eric Dumazet says:
====================
tun: address two syzbot reports
Small changes addressing races discovered by syzbot.
First patch is a cleanup.
Second patch moves a mutex init sooner.
Third patch makes sure each tfile gets its own napi enable flags.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since tun->flags might be shared by multiple tfile structures,
it is better to make sure tun_get_user() is using the flags
for the current tfile.
Presence of the READ_ONCE() in tun_napi_frags_enabled() gave a hint
of what could happen, but we need something stronger to please
syzbot.
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 13647 Comm: syz-executor5 Not tainted 4.19.0-rc5+ #59
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:dev_gro_receive+0x132/0x2720 net/core/dev.c:5427
Code: 48 c1 ea 03 80 3c 02 00 0f 85 6e 20 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 6e 10 49 8d bd d0 00 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 59 20 00 00 4d 8b a5 d0 00 00 00 31 ff 41 81 e4
RSP: 0018:ffff8801c400f410 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8618d325
RDX: 000000000000001a RSI: ffffffff86189f97 RDI: 00000000000000d0
RBP: ffff8801c400f608 R08: ffff8801c8fb4300 R09: 0000000000000000
R10: ffffed0038801ed7 R11: 0000000000000003 R12: ffff8801d327d358
R13: 0000000000000000 R14: ffff8801c16dd8c0 R15: 0000000000000004
FS: 00007fe003615700(0000) GS:ffff8801dac00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe1f3c43db8 CR3: 00000001bebb2000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
napi_gro_frags+0x3f4/0xc90 net/core/dev.c:5715
tun_get_user+0x31d5/0x42a0 drivers/net/tun.c:1922
tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1967
call_write_iter include/linux/fs.h:1808 [inline]
new_sync_write fs/read_write.c:474 [inline]
__vfs_write+0x6b8/0x9f0 fs/read_write.c:487
vfs_write+0x1fc/0x560 fs/read_write.c:549
ksys_write+0x101/0x260 fs/read_write.c:598
__do_sys_write fs/read_write.c:610 [inline]
__se_sys_write fs/read_write.c:607 [inline]
__x64_sys_write+0x73/0xb0 fs/read_write.c:607
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457579
Code: 1d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fe003614c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457579
RDX: 0000000000000012 RSI: 0000000020000000 RDI: 000000000000000a
RBP: 000000000072c040 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0036156d4
R13: 00000000004c5574 R14: 00000000004d8e98 R15: 00000000ffffffff
Modules linked in:
RIP: 0010:dev_gro_receive+0x132/0x2720 net/core/dev.c:5427
Code: 48 c1 ea 03 80 3c 02 00 0f 85 6e 20 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 6e 10 49 8d bd d0 00 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 59 20 00 00 4d 8b a5 d0 00 00 00 31 ff 41 81 e4
RSP: 0018:ffff8801c400f410 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8618d325
RDX: 000000000000001a RSI: ffffffff86189f97 RDI: 00000000000000d0
RBP: ffff8801c400f608 R08: ffff8801c8fb4300 R09: 0000000000000000
R10: ffffed0038801ed7 R11: 0000000000000003 R12: ffff8801d327d358
R13: 0000000000000000 R14: ffff8801c16dd8c0 R15: 0000000000000004
FS: 00007fe003615700(0000) GS:ffff8801dac00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe1f3c43db8 CR3: 00000001bebb2000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is the first part to fix following syzbot report :
console output: https://syzkaller.appspot.com/x/log.txt?x=145378e6400000
kernel config: https://syzkaller.appspot.com/x/.config?x=443816db871edd66
dashboard link: https://syzkaller.appspot.com/bug?extid=e662df0ac1d753b57e80
Following patch is fixing the race condition, but it seems safer
to initialize this mutex at tfile creation anyway.
Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+e662df0ac1d753b57e80@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tun_napi_disable() and tun_napi_del() do not need
a pointer to the tun_struct
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The bonding driver lacks the rcu lock when it calls down into
netdev_lower_get_next_private_rcu from bond_poll_controller, which
results in a trace like:
WARNING: CPU: 2 PID: 179 at net/core/dev.c:6567 netdev_lower_get_next_private_rcu+0x34/0x40
CPU: 2 PID: 179 Comm: kworker/u16:15 Not tainted 4.19.0-rc5-backup+ #1
Workqueue: bond0 bond_mii_monitor
RIP: 0010:netdev_lower_get_next_private_rcu+0x34/0x40
Code: 48 89 fb e8 fe 29 63 ff 85 c0 74 1e 48 8b 45 00 48 81 c3 c0 00 00 00 48 8b 00 48 39 d8 74 0f 48 89 45 00 48 8b 40 f8 5b 5d c3 <0f> 0b eb de 31 c0 eb f5 0f 1f 40 00 0f 1f 44 00 00 48 8>
RSP: 0018:ffffc9000087fa68 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff880429614560 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 00000000ffffffff RDI: ffffffffa184ada0
RBP: ffffc9000087fa80 R08: 0000000000000001 R09: 0000000000000000
R10: ffffc9000087f9f0 R11: ffff880429798040 R12: ffff8804289d5980
R13: ffffffffa1511f60 R14: 00000000000000c8 R15: 00000000ffffffff
FS: 0000000000000000(0000) GS:ffff88042f880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4b78fce180 CR3: 000000018180f006 CR4: 00000000001606e0
Call Trace:
bond_poll_controller+0x52/0x170
netpoll_poll_dev+0x79/0x290
netpoll_send_skb_on_dev+0x158/0x2c0
netpoll_send_udp+0x2d5/0x430
write_ext_msg+0x1e0/0x210
console_unlock+0x3c4/0x630
vprintk_emit+0xfa/0x2f0
printk+0x52/0x6e
? __netdev_printk+0x12b/0x220
netdev_info+0x64/0x80
? bond_3ad_set_carrier+0xe9/0x180
bond_select_active_slave+0x1fc/0x310
bond_mii_monitor+0x709/0x9b0
process_one_work+0x221/0x5e0
worker_thread+0x4f/0x3b0
kthread+0x100/0x140
? process_one_work+0x5e0/0x5e0
? kthread_delayed_work_timer_fn+0x90/0x90
ret_from_fork+0x24/0x30
We're also doing rcu dereferences a layer up in netpoll_send_skb_on_dev
before we call down into netpoll_poll_dev, so just take the lock there.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Link dumps can return results from a target namespace. If the namespace id
is invalid, then the dump request should fail if get_target_net fails
rather than continuing with a dump of the current namespace.
Fixes: 79e1ad148c844 ("rtnetlink: use netnsid to query interface")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 90c7afc96cbbd77f44094b5b651261968e97de67.
When the commit was merged, the code used nf_ct_put() to free
the entry, but later on commit 76644232e612 ("openvswitch: Free
tmpl with tmpl_free.") replaced that with nf_ct_tmpl_free which
is a more appropriate. Now the original problem is removed.
Then 44d6e2f27328 ("net: Replace NF_CT_ASSERT() with WARN_ON().")
replaced a debug assert with a WARN_ON() which is trigged now.
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Johan Hedberg says:
====================
pull request: bluetooth 2018-09-27
Here's one more Bluetooth fix for 4.19, fixing the handling of an
attempt to unpair a device while pairing is in progress.
Let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The initial session number when a link is created is based on a random
value, taken from struct tipc_net->random. It is then incremented for
each link reset to avoid mixing protocol messages from different link
sessions.
However, when a bearer is reset all its links are deleted, and will
later be re-created using the same random value as the first time.
This means that if the link never went down between creation and
deletion we will still sometimes have two subsequent sessions with
the same session number. In virtual environments with potentially
long transmission times this has turned out to be a real problem.
We now fix this by randomizing the session number each time a link
is created.
With a session number size of 16 bits this gives a risk of session
collision of 1/64k. To reduce this further, we also introduce a sanity
check on the very first STATE message arriving at a link. If this has
an acknowledge value differing from 0, which is logically impossible,
we ignore the message. The final risk for session collision is hence
reduced to 1/4G, which should be sufficient.
Signed-off-by: LUU Duc Canh <canh.d.luu@dektech.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If "td->u.target_size" is larger than sizeof(struct xt_entry_target) we
return -EINVAL. But we don't check whether it's smaller than
sizeof(struct xt_entry_target) and that could lead to an out of bounds
read.
Fixes: 7ba699c604ab ("[NET_SCHED]: Convert actions from rtnetlink to new netlink API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Steffen Klassert says:
====================
pull request (net): ipsec 2018-10-01
1) Validate address prefix lengths in the xfrm selector,
otherwise we may hit undefined behaviour in the
address matching functions if the prefix is too
big for the given address family.
2) Fix skb leak on local message size errors.
From Thadeu Lima de Souza Cascardo.
3) We currently reset the transport header back to the network
header after a transport mode transformation is applied. This
leads to an incorrect transport header when multiple transport
mode transformations are applied. Reset the transport header
only after all transformations are already applied to fix this.
From Sowmini Varadhan.
4) We only support one offloaded xfrm, so reset crypto_done after
the first transformation in xfrm_input(). Otherwise we may call
the wrong input method for subsequent transformations.
From Sowmini Varadhan.
5) Fix NULL pointer dereference when skb_dst_force clears the dst_entry.
skb_dst_force does not really force a dst refcount anymore, it might
clear it instead. xfrm code did not expect this, add a check to not
dereference skb_dst() if it was cleared by skb_dst_force.
6) Validate xfrm template mode, otherwise we can get a stack-out-of-bounds
read in xfrm_state_find. From Sean Tranchetti.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In normal SYN processing, packets are handled without listener
lock and in RCU protected ingress path.
But syzkaller is known to be able to trick us and SYN
packets might be processed in process context, after being
queued into socket backlog.
In commit 06f877d613be ("tcp/dccp: fix other lockdep splats
accessing ireq_opt") I made a very stupid fix, that happened
to work mostly because of the regular path being RCU protected.
Really the thing protecting ireq->ireq_opt is RCU read lock,
and the pseudo request refcnt is not relevant.
This patch extends what I did in commit 449809a66c1d ("tcp/dccp:
block BH for SYN processing") by adding an extra rcu_read_{lock|unlock}
pair in the paths that might be taken when processing SYN from
socket backlog (thus possibly in process context)
Fixes: 06f877d613be ("tcp/dccp: fix other lockdep splats accessing ireq_opt")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree:
1) Skip ip_sabotage_in() for packet making into the VRF driver,
otherwise packets are dropped, from David Ahern.
2) Clang compilation warning uncovering typo in the
nft_validate_register_store() call from nft_osf, from Stefan Agner.
3) Double sizeof netlink message length calculations in ctnetlink,
from zhong jiang.
4) Missing rb_erase() on batch full in rbtree garbage collector,
from Taehee Yoo.
5) Calm down compilation warning in nf_hook(), from Florian Westphal.
6) Missing check for non-null sk in xt_socket before validating
netns procedence, from Flavio Leitner.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a simple typo: attribuets -> attributes
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Disable the clk during suspend to save power. Note that tp->clk may be
NULL, the clk core functions handle this without problems.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In regular NIC transmission flow, driver always configures MAC using
Tx queue zero descriptor as a part of MAC learning flow.
But with multi Tx queue supported NIC, regular transmission can occur on
any non-zero Tx queue and from that context it uses
Tx queue zero descriptor to configure MAC, at the same time TX queue
zero could be used by another CPU for regular transmission
which could lead to Tx queue zero descriptor corruption and cause FW
abort.
This patch fixes this in such a way that driver always configures
learned MAC address from the same Tx queue which is used for
regular transmission.
Fixes: 7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism")
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We see the following scenario:
1) Link endpoint B on node 1 discovers that its peer endpoint is gone.
Since there is a second working link, failover procedure is started.
2) Link endpoint A on node 1 sends a FAILOVER message to peer endpoint
A on node 2. The node item 1->2 goes to state FAILINGOVER.
3) Linke endpoint A/2 receives the failover, and is supposed to take
down its parallell link endpoint B/2, while producing a FAILOVER
message to send back to A/1.
4) However, B/2 has already been deleted, so no FAILOVER message can
created.
5) Node 1->2 remains in state FAILINGOVER forever, refusing to receive
any messages that can bring B/1 up again. We are left with a non-
redundant link between node 1 and 2.
We fix this with letting endpoint A/2 build a dummy FAILOVER message
to send to back to A/1, so that the situation can be resolved.
Signed-off-by: LUU Duc Canh <canh.d.luu@dektech.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Florian Fainelli says:
====================
net: usb: Check for Wake-on-LAN modes
Most of our USB Ethernet drivers don't seem to be checking properly
whether the user is supplying a correct Wake-on-LAN mode to enter, so
the experience as an user could be confusing, since it would generally
lead to either no wake-up, or the device not being marked for wake-up.
Please review!
Changes in v2:
- fixed lan78xx handling, thanks Woojung!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.
Fixes: e0e474a83c18 ("smsc95xx: add wol magic packet support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.
Fixes: 6c636503260d ("smsc75xx: add wol magic packet support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.
Fixes: 21ff2e8976b1 ("r8152: support WOL")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver currently silently accepts unsupported Wake-on-LAN modes
(other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user,
which is confusing.
Fixes: 19a38d8e0aa3 ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver supports a fair amount of Wake-on-LAN modes, but is not
checking that the user specified one that is supported.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Woojung Huh <Woojung.Huh@Microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver currently silently accepts unsupported Wake-on-LAN modes
(other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user,
which is confusing.
Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver currently silently accepts unsupported Wake-on-LAN modes
(other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user,
which is confusing.
Fixes: 2e55cc7210fe ("[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2018-09-28
An update from ieee802154 for your *net* tree.
Some cleanup patches throughout the drivers from the Huawei tag team
Yue Haibing and Zhong Jiang.
Xue is replacing some magic numbers with defines in his mcr20a driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
David Howells says:
====================
rxrpc: Fixes
Here are some miscellaneous fixes for AF_RXRPC:
(1) Remove a duplicate variable initialisation.
(2) Fix one of the checks made when we decide to set up a new incoming
service call in which a flag is being checked in the wrong field of
the packet header. This check is abstracted out into helper
functions.
(3) Fix RTT gathering. The code has been trying to make use of socket
timestamps, but wasn't actually enabling them. The code has also been
recording a transmit time for the outgoing packet for which we're
going to measure the RTT after sending the message - but we can get
the incoming packet before we get to that and record a negative RTT.
(4) Fix the emission of BUSY packets (we are emitting ABORTs instead).
(5) Improve error checking on incoming packets.
(6) Try to fix a bug in new service call handling whereby a BUG we should
never be able to reach somehow got triggered. Do this by moving much
of the checking as early as possible and not repeating it later
(depends on (5) above).
(7) Fix the sockopts set on a UDP6 socket to include the ones set on a
UDP4 socket so that we receive UDP4 errors and packet-too-large
notifications too.
(8) Fix the distribution of errors so that we do it at the point of
receiving an error in the UDP callback rather than deferring it
thereby cutting short any transmissions that would otherwise occur in
the window.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eric Dumazet says:
====================
netpoll: second round of fixes.
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC).
This capture, showing one ksoftirqd eating all cycles
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
It seems that all networking drivers that do use NAPI
for their TX completions, should not provide a ndo_poll_controller() :
Most NAPI drivers have netpoll support already handled
in core networking stack, since netpoll_poll_dev()
uses poll_napi(dev) to iterate through registered
NAPI contexts for a device.
First patch is a fix in poll_one_napi().
Then following patches take care of ten drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
ibmvnic uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
ibmvnic_netpoll_controller() was completely wrong anyway,
as it was scheduling NAPI to service RX queues (instead of TX),
so I doubt netpoll ever worked on this driver.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
sfc-falcon uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
Cc: Edward Cree <ecree@solarflare.com>
Cc: Bert Kenward <bkenward@solarflare.com>
Acked-By: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
sfc uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Edward Cree <ecree@solarflare.com>
Cc: Bert Kenward <bkenward@solarflare.com>
Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
Acked-By: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
ena uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Netanel Belgazal <netanel@amazon.com>
Cc: Saeed Bishara <saeedb@amazon.com>
Cc: Zorik Machulsky <zorik@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
netxen uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Manish Chopra <manish.chopra@cavium.com>
Cc: Rahul Verma <rahul.verma@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
qlcnic uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Harish Patil <harish.patil@cavium.com>
Cc: Manish Chopra <manish.chopra@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
virto_net uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
hns uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
ehea uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Douglas Miller <dougmill@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
hinic uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Note that hinic_netpoll() was incorrectly scheduling NAPI
on both RX and TX queues.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since we do no longer require NAPI drivers to provide
an ndo_poll_controller(), napi_schedule() has not been done
before poll_one_napi() invocation.
So testing NAPI_STATE_SCHED is likely to cause early returns.
While we are at it, remove outdated comment.
Note to future bisections : This change might surface prior
bugs in drivers. See commit 73f21c653f93 ("bnxt_en: Fix TX
timeout during netpoll.") for one occurrence.
Fixes: ac3d9dd034e5 ("netpoll: make ndo_poll_controller() optional")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Song Liu <songliubraving@fb.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Johannes Berg says:
====================
More patches than I'd like perhaps, but each seems reasonable:
* two new spectre-v1 mitigations in nl80211
* TX status fix in general, and mesh in particular
* powersave vs. offchannel fix
* regulatory initialization fix
* fix for a queue hang due to a bad return value
* allocate TXQs for active monitor interfaces, fixing my
earlier patch to avoid unnecessary allocations where I
missed this case needed them
* fix TDLS data frames priority assignment
* fix scan results processing to take into account duplicate
channel numbers (over different operating classes, but we
don't necessarily know the operating class)
* various hwsim fixes for radio destruction and new radio
announcement messages
* remove an extraneous kernel-doc line
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The structure shared between driver and the management FW (mfw) differ in
sizes. This would lead to issues when driver try to access the structure
members which are not-aligned with the mfw copy e.g., data_ptr usage in the
case of mfw_tlv request.
Align the driver structure with mfw copy, add reserved field(s) to driver
structure for the members not used by the driver.
Fixes: dd006921d67f ("qed: Add MFW interfaces for TLV request support.)
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
|
|
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ameen Rahman <Ameen.Rahman@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I haven't been doing reviews only but not active development on bridge
code for several years. Roopa and Nikolay have been doing most of
the new features and have agreed to take over as new co-maintainers.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
|
|
Julian Wiedmann says:
====================
s390/qeth: fixes 2019-09-26
please apply two qeth patches for -net. The first is a trivial cleanup
required for patch #2 by Jean, which fixes a potential endless loop.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Functions qeth_get_ipa_msg and qeth_get_ipa_cmd_name are modifying
the last member of global arrays without any locking that I can see.
If two instances of either function are running at the same time,
it could cause a race ultimately leading to an array overrun (the
contents of the last entry of the array is the only guarantee that
the loop will ever stop).
Performing the lookups without modifying the arrays is admittedly
slower (two comparisons per iteration instead of one) but these
are operations which are rare (should only be needed in error
cases or when debugging, not during successful operation) and it
seems still less costly than introducing a mutex to protect the
arrays in question.
As a side bonus, it allows us to declare both arrays as const data.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Julian Wiedmann <jwi@linux.ibm.com>
Cc: Ursula Braun <ubraun@linux.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the common code ARRAY_SIZE macro instead of a private implementation.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Jakub Kicinski
Maciej W. Rozycki
Rickard x Andersson
Heiner Kallweit
David S. Miller
Eric Dumazet
Dave Jones
David Ahern
Flavio Leitner
LUU Duc Canh
Dan Carpenter
Johannes Berg
Hans de Goede
Shahed Shaikh
Florian Fainelli
Sudarsana Reddy Kalluru
Stephen Hemminger
Jean Delvare
zhong jiang