| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove the asus-wmi quirk_entry.wmi_backlight_power quirk-flag, which
called acpi_video_set_dmi_backlight_type(acpi_backlight_vendor) and replace
it with acpi/video_detect.c video_detect_dmi_table[] entries using the
video_detect_force_vendor callback.
acpi_video_set_dmi_backlight_type() is troublesome because it may end up
getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.
Note no entries are dropped from the dmi_system_id table in asus-nb-wmi.c.
This is because the entries using the removed wmi_backlight_power flag
also use other model specific quirks from the asus-wmi quirk_entry struct.
So the quirk_asus_x55u struct and the entries pointing to it cannot be
dropped.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Remove this check from the asus-wmi backlight handling:
/* Some Asus desktop boards export an acpi-video backlight interface,
stop this from showing up */
chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
if (chassis_type && !strcmp(chassis_type, "3"))
acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
This acpi_video_set_dmi_backlight_type(acpi_backlight_vendor) call must be
removed because other changes in this series change the native backlight
drivers to no longer unconditionally register their backlight. Instead
these drivers now do this check:
if (acpi_video_get_backlight_type(false) != acpi_backlight_native)
return 0; /* bail */
So leaving this in place can break things on laptops with a broken
DMI chassis-type, which would have GPU native brightness control before
the addition of the acpi_video_get_backlight_type() != native check.
Removing this should be ok now, since the ACPI video code has improved
heuristics for this itself now (which includes a chassis-type check).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move the backlight DMI quirks to acpi/video_detect.c, so that
the driver no longer needs to call acpi_video_set_dmi_backlight_type().
acpi_video_set_dmi_backlight_type() is troublesome because it may end up
getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.
Note that even though the DMI quirk table name was video_vendor_dmi_table,
5/6 quirks were actually quirks to use the GPU native backlight.
These 5 quirks also had a callback in their dmi_system_id entry which
disabled the acer-wmi vendor driver; and any DMI match resulted in:
acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
which disabled the acpi_video driver, so only the native driver was left.
The new entries for these 5/6 devices correctly marks these as needing
the native backlight driver.
Also note that other changes in this series change the native backlight
drivers to no longer unconditionally register their backlight. Instead
these drivers now do this check:
if (acpi_video_get_backlight_type(false) != acpi_backlight_native)
return 0; /* bail */
which without this patch would have broken these 5/6 "special" quirks.
Since I had to look at all the commits adding the quirks anyways, to make
sure that I understood the code correctly, I've also added links to
the various original bugzillas for these quirks to the new entries.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
acpi_video_set_dmi_backlight_type() is troublesome because it may end up
getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.
In case of the acpi_video backlight, acpi_video_set_dmi_backlight_type()
actually calls acpi_video_unregister_backlight() since that is often
probed earlier, leading to userspace seeing the acpi_video0 class
device being briefly available, leading to races in userspace where
udev probe-rules try to access the device and it is already gone.
In case of toshiba_acpi there are no DMI quirks to move to
acpi/video_detect.c, but it also (ab)uses it for transflective
displays. Adding transflective display support to video_detect.c would
be quite involved. But luckily there are only 2 known models with
a transflective display, so we can just add DMI quirks for those.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Now that acpi_video_get_backlight_type() has apple-gmux detection (using
apple_gmux_present()), it is no longer necessary for the apple-gmux code
to manually remove possibly conflicting drivers.
So remove the handling for this from the apple-gmux driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add an acpi_video_get_backlight_type() == acpi_backlight_nvidia_wmi_ec
check. This will make nvidia-wmi-ec-backlight properly honor the user
selecting a different backlight driver through the acpi_backlight=...
kernel commandline option.
Since the auto-detect code check for nvidia-wmi-ec-backlight in
drivers/acpi/video_detect.c already checks that the WMI advertised
brightness-source is the embedded controller, this new check makes it
unnecessary for nvidia_wmi_ec_backlight_probe() to check this itself.
Suggested-by: Daniel Dadap <ddadap@nvidia.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
On Apple laptops with an Apple GMUX using this for brightness control,
should take precedence of any other brightness control methods.
Add apple-gmux detection to acpi_video_get_backlight_type() using
the already existing apple_gmux_present() helper function.
This will allow removig the (ab)use of:
acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
Inside the apple-gmux driver.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
On some new laptop designs a new Nvidia specific WMI interface is present
which gives info about panel brightness control and may allow controlling
the brightness through this interface when the embedded controller is used
for brightness control.
When this WMI interface is present and indicates that the EC is used,
then this interface should be used for brightness control.
Changes in v2:
- Use the new shared nvidia-wmi-ec-backlight.h header for the
WMI firmware API definitions
- ACPI_VIDEO can now be enabled on non X86 too,
adjust the Kconfig changes to match this.
Changes in v3:
- Use WMI_BRIGHTNESS_GUID define
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Refactor acpi_video_get_backlight_type() so that the heuristics /
detection steps are stricly in order of descending precedence.
Also move the comments describing the steps to when the various steps are
actually done, to avoid the comments getting out of sync with the code.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move the WMI interface definitions to a header, so that the definitions
can be shared with drivers/acpi/video_detect.c .
Changes in v2:
- Add missing Nvidia copyright header
- Move WMI_BRIGHTNESS_GUID to nvidia-wmi-ec-backlight.h as well
Suggested-by: Daniel Dadap <ddadap@nvidia.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Typically the acpi_video driver will initialize before radeon, which
used to cause /sys/class/backlight/acpi_video0 to get registered and then
radeon would register its own radeon_bl# device later. After which
the drivers/acpi/video_detect.c code unregistered the acpi_video0 device
to avoid there being 2 backlight devices.
This means that userspace used to briefly see 2 devices and the
disappearing of acpi_video0 after a brief time confuses the systemd
backlight level save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920
To fix this the ACPI video code has been modified to make backlight class
device registration a separate step, relying on the drm/kms driver to
ask for the acpi_video backlight registration after it is done setting up
its native backlight device.
Add a call to the new acpi_video_register_backlight() when radeon skips
registering its own backlight device because of e.g. the firmware_flags
or the acpi_video_get_backlight_type() return value. This ensures that
if the acpi_video backlight device should be used, it will be available
before the radeon drm_device gets registered with userspace.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Typically the acpi_video driver will initialize before amdgpu, which
used to cause /sys/class/backlight/acpi_video0 to get registered and then
amdgpu would register its own amdgpu_bl# device later. After which
the drivers/acpi/video_detect.c code unregistered the acpi_video0 device
to avoid there being 2 backlight devices.
This means that userspace used to briefly see 2 devices and the
disappearing of acpi_video0 after a brief time confuses the systemd
backlight level save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920
To fix this the ACPI video code has been modified to make backlight class
device registration a separate step, relying on the drm/kms driver to
ask for the acpi_video backlight registration after it is done setting up
its native backlight device.
Add a call to the new acpi_video_register_backlight() when amdgpu skips
registering its own backlight device because of either the firmware_flags
or the acpi_video_get_backlight_type() return value. This ensures that
if the acpi_video backlight device should be used, it will be available
before the amdgpu drm_device gets registered with userspace.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Typically the acpi_video driver will initialize before nouveau, which
used to cause /sys/class/backlight/acpi_video0 to get registered and then
nouveau would register its own nv_backlight device later. After which
the drivers/acpi/video_detect.c code unregistered the acpi_video0 device
to avoid there being 2 backlight devices.
This means that userspace used to briefly see 2 devices and the
disappearing of acpi_video0 after a brief time confuses the systemd
backlight level save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920
To fix this the ACPI video code has been modified to make backlight class
device registration a separate step, relying on the drm/kms driver to
ask for the acpi_video backlight registration after it is done setting up
its native backlight device.
Add a call to the new acpi_video_register_backlight() when native backlight
device registration has failed / was skipped to ensure that there is a
backlight device available before the drm_device gets registered with
userspace.
Changes in v2:
- Add nouveau_acpi_video_register_backlight() wrapper to avoid unresolved
symbol errors on non X86
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
On machins without an i915 opregion the acpi_video driver immediately
probes the ACPI video bus and used to also immediately register
acpi_video# backlight devices when supported.
Once the drm/kms driver then loaded later and possibly registered
a native backlight device then the drivers/acpi/video_detect.c code
unregistered the acpi_video0 device to avoid there being 2 backlight
devices (when acpi_video_get_backlight_type()==native).
This means that userspace used to briefly see 2 devices and the
disappearing of acpi_video0 after a brief time confuses the systemd
backlight level save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920
To fix this the ACPI video code has been modified to make backlight class
device registration a separate step, relying on the drm/kms driver to
ask for the acpi_video backlight registration after it is done setting up
its native backlight device.
Add a call to the new acpi_video_register_backlight() after the i915 calls
acpi_video_register() (after setting up the i915 opregion) so that the
acpi_video backlight devices get registered on systems where the i915
native backlight device is not registered.
Changes in v2:
-Only call acpi_video_register_backlight() when a panel is detected
Changes in v3:
-Add a new intel_acpi_video_register() helper which checks if a panel
is present and then calls acpi_video_register_backlight()
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
A lot of modern laptops use the Parade PS8461E MUX for eDP
switching. The MUX can operate in jitter cleaning mode or
redriver mode, the first one resulting in higher link
quality. The jitter cleaning mode needs to know the link
rate used and the MUX achieves this by snooping the
LINK_BW_SET, LINK_RATE_SELECT and SUPPORTED_LINK_RATES
DPCD accesses.
When the MUX is powered down (seems this can happen whenever
the display is turned off) it loses track of the snooped
link rates so when we do the LINK_RATE_SELECT write it no
longer knowns which link rate we're selecting, and thus it
falls back to the lower quality redriver mode. This results
in unstable high link rates (eg. usually 8.1Gbps link rate
no longer works correctly).
In order to avoid all that let's re-snoop SUPPORTED_LINK_RATES
from the sink at the start of every link training.
Unfortunately we don't have a way to detect the presence of
the MUX. It looks like the set of laptops equipped with this
MUX is fairly large and contains devices from multiple
manufacturers. It may also still be growing with new models.
So a quirk doesn't seem like a very easily maintainable
option, thus we shall attempt to do this unconditionally on
all machines that use LINK_RATE_SELECT. Hopefully this extra
DPCD read doesn't cause issues for any unaffected machine.
If that turns out to be the case we'll need to convert this
into a quirk in the future.
Cc: stable@vger.kernel.org
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902070319.15395-1-ville.syrjala@linux.intel.com
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Return the value pa_to_nid() directly instead of storing it in another
redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The kernel build error when unslected CONFIG_MEMORY_HOTREMOVE because
arch_remove_memory() is needed by mm/memory_hotplug.c but undefined.
Some build error messages like:
LD vmlinux.o
MODPOST vmlinux.symvers
MODINFO modules.builtin.modinfo
GEN modules.builtin
LD .tmp_vmlinux.kallsyms1
loongarch64-linux-gnu-ld: mm/memory_hotplug.o: in function `.L242':
memory_hotplug.c:(.ref.text+0x930): undefined reference to `arch_remove_memory'
make: *** [Makefile:1169：vmlinux] 错误 1
Removed CONFIG_MEMORY_HOTREMOVE requirement and rearrange the file refer
to the definitions of other platform architectures.
Signed-off-by: Yupeng Li <liyupeng@zbhlos.com>
Signed-off-by: Caicai <caizp2008@163.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Now acpi_os_ioremap() is marked with __init because it calls memblock_
is_memory() which is also marked with __init in the !ARCH_KEEP_MEMBLOCK
case. However, acpi_os_ioremap() is called by ordinary functions such
as acpi_os_{read, write}_memory() and causes section mismatch warnings:
WARNING: modpost: vmlinux.o: section mismatch in reference: acpi_os_read_memory (section: .text) -> acpi_os_ioremap (section: .init.text)
WARNING: modpost: vmlinux.o: section mismatch in reference: acpi_os_write_memory (section: .text) -> acpi_os_ioremap (section: .init.text)
Fix these warnings by selecting ARCH_KEEP_MEMBLOCK unconditionally and
removing the __init modifier of acpi_os_ioremap(). This can also give a
chance to track "memory" and "reserved" memblocks after early boot.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
1, Use nr/nx to replace ri/xi;
2, Add 0x prefix for hexadecimal data.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Commit 8ba62d37949e248c69 ("task_work: Call tracehook_notify_signal from
get_signal on all architectures") adjust arch_do_signal_or_restart() for
all architectures. LoongArch hasn't been upstream yet at that time and
can be still built successfully without adjustment because this function
has a weak version with the correct prototype. It is obviously that we
should convert LoongArch to use new API, otherwise some signal handlings
will be lost.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Ensure that all input sections are listed explicitly in the linker
script, and issue a warning otherwise. This ensures that the binary
image matches the PE/COFF and other image metadata exactly, which is
important for things like code signing.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-09-02 (i40e, iavf)
This series contains updates to i40e and iavf drivers.
Przemyslaw adds reset to ADQ configuration to allow for setting of rate
limit beyond TC0 for i40e.
Ivan Vecera does not free client on failure to open which could cause
NULL pointer dereference to occur on i40e. He also detaches device
during reset to prevent NDO calls with could cause races for iavf.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tony Nguyen says:
====================
This series contains updates to ice driver only.
Przemyslaw fixes memory leak of DMA memory due to incorrect freeing of
rx_buf.
Michal S corrects incorrect call to free memory.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After driver refactoring we was running ksz9477 specific CPU port
configuration on ksz8 family which ended with kernel oops. So, make sure
we run this code only on ksz9477 compatible devices.
Tested on KSZ8873 and KSZ9477.
Fixes: da8cd08520f3 ("net: dsa: microchip: add support for common phylink mac link up")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Zhengchao Shao says:
====================
net: sched: remove redundant resource cleanup when init() fails
qdisc_create() calls .init() to initialize qdisc. If the initialization
fails, qdisc_create() will call .destroy() to release resources.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If htb_init() fails, qdisc_create() invokes htb_destroy() to clear
resources. Therefore, remove redundant resource cleanup in htb_init().
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If fq_codel_init() fails, qdisc_create() invokes fq_codel_destroy() to
clear resources. Therefore, remove redundant resource cleanup in
fq_codel_init().
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current driver support stop mode by calling machine api.
The patch add dts support to set GPR register for stop request.
imx8mq enter stop/exit stop mode by setting GPR bit, which can
be accessed by A core.
imx8qm enter stop/exit stop mode by calling IMX_SC ipc APIs that
communicate with M core ipc service, and the M core set the related
GPR bit at last.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Lenovo USB-C Travel Hub supports MAC passthrough.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Removing 'hotplug-status' in backend_disconnected() means that it will be
removed even in the case that the frontend unilaterally disconnects (which
it is free to do at any time). The consequence of this is that, when the
frontend attempts to re-connect, the backend gets stuck in 'InitWait'
rather than moving straight to 'Connected' (which it can do because the
hotplug script has already run).
Instead, the 'hotplug-status' mode should be removed in netback_remove()
i.e. when the vif really is going away.
Fixes: 0f4558ae9187 ("Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"")
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We now have a cleaner way to keep compatibility with user-space
(a.k.a. not breaking it) when we need to keep in place a one-element
array (for its use in user-space) together with a flexible-array
member (for its use in kernel-space) without making it hard to read
at the source level. This is through the use of the new
__DECLARE_FLEX_ARRAY() helper macro.
The size and memory layout of the structure is preserved after the
changes. See below.
Before changes:
$ pahole -C ip_msfilter net/ipv4/igmp.o
struct ip_msfilter {
union {
struct {
__be32 imsf_multiaddr_aux; /* 0 4 */
__be32 imsf_interface_aux; /* 4 4 */
__u32 imsf_fmode_aux; /* 8 4 */
__u32 imsf_numsrc_aux; /* 12 4 */
__be32 imsf_slist[1]; /* 16 4 */
}; /* 0 20 */
struct {
__be32 imsf_multiaddr; /* 0 4 */
__be32 imsf_interface; /* 4 4 */
__u32 imsf_fmode; /* 8 4 */
__u32 imsf_numsrc; /* 12 4 */
__be32 imsf_slist_flex[0]; /* 16 0 */
}; /* 0 16 */
}; /* 0 20 */
/* size: 20, cachelines: 1, members: 1 */
/* last cacheline: 20 bytes */
};
After changes:
$ pahole -C ip_msfilter net/ipv4/igmp.o
struct ip_msfilter {
__be32 imsf_multiaddr; /* 0 4 */
__be32 imsf_interface; /* 4 4 */
__u32 imsf_fmode; /* 8 4 */
__u32 imsf_numsrc; /* 12 4 */
union {
__be32 imsf_slist[1]; /* 16 4 */
struct {
struct {
} __empty_imsf_slist_flex; /* 16 0 */
__be32 imsf_slist_flex[0]; /* 16 0 */
}; /* 16 0 */
}; /* 16 4 */
/* size: 20, cachelines: 1, members: 5 */
/* last cacheline: 20 bytes */
};
In the past, we had to duplicate the whole original structure within
a union, and update the names of all the members. Now, we just need to
declare the flexible-array member to be used in kernel-space through
the __DECLARE_FLEX_ARRAY() helper together with the one-element array,
within a union. This makes the source code more clean and easier to read.
Link: https://github.com/KSPP/linux/issues/193
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 6b66ca0bac1b9cee7608d7c4dc59b699458b4cb8 as it
breaks the build on some arches as reported by the kernel test robot.
Link: https://lore.kernel.org/r/202209030824.SouwDV5M-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 6b66ca0bac1b ("arch_topology: Make cluster topology span at least SMT CPUs")
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Ionela Voinescu <ionela.voinescu@arm.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
tcf_qevent_parse_block_index() never returns a zero block_index.
Therefore, it is unnecessary to check the value of block_index in
tcf_qevent_init().
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20220901011617.14105-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since Linux now supports CFI, it will be a good idea to fix mismatched
return type for implementation of hooks. Otherwise this might get
cought out by CFI and cause a panic.
ltq_etop_tx() would return either NETDEV_TX_BUSY or NETDEV_TX_OK, so
change the return type to netdev_tx_t directly.
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Link: https://lore.kernel.org/r/20220902081521.59867-1-guozihua@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since Linux now supports CFI, it will be a good idea to fix mismatched
return type for implementation of hooks. Otherwise this might get
cought out by CFI and cause a panic.
spl2sw_ethernet_start_xmit() would return either NETDEV_TX_BUSY or
NETDEV_TX_OK, so change the return type to netdev_tx_t directly.
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Link: https://lore.kernel.org/r/20220902081550.60095-1-guozihua@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since Linux now supports CFI, it will be a good idea to fix mismatched
return type for implementation of hooks. Otherwise this might get
cought out by CFI and cause a panic.
eth_xmit() would return either NETDEV_TX_BUSY or NETDEV_TX_OK, so
change the return type to netdev_tx_t directly.
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Link: https://lore.kernel.org/r/20220902081612.60405-1-guozihua@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since Linux now supports CFI, it will be a good idea to fix mismatched
return type for implementation of hooks. Otherwise this might get
cought out by CFI and cause a panic.
bcm4908_enet_start_xmit() would return either NETDEV_TX_BUSY or
NETDEV_TX_OK, so change the return type to netdev_tx_t directly.
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220902075407.52358-1-guozihua@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mutexes cannot be taken in a non-preemptible context,
causing a panic in `fec_ptp_save_state()`. Replacing
`ptp_clk_mutex` by `tmreg_lock` fixes this.
Fixes: 6a4d7234ae9a ("net: fec: ptp: avoid register access when ipg clock is disabled")
Fixes: f79959220fa5 ("fec: Restart PPS after link state change")
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/all/20220827160922.642zlcd5foopozru@pengutronix.de/
Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Apalis iMX6
Link: https://lore.kernel.org/r/20220901140402.64804-1-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a very low probability that tx timeout will occur during
suspend and resume stress test on imx6q platform. So we add pm_qos
support to prevent system from entering low level idles which may
affect the transmission of tx.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20220830070148.2021947-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
LPI2C requires two clocks, add the missed IPG clock.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The clock name should be per clock, not ipg clock.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Martin KaFai Lau says:
====================
From: Martin KaFai Lau <martin.lau@kernel.org>
The earlier commits [0] removed duplicated code from bpf_setsockopt().
This series is to remove duplicated code from bpf_getsockopt().
Unlike the setsockopt() which had already changed to take
the sockptr_t argument, the same has not been done to
getsockopt(). This is the extra step being done in this
series.
[0]: https://lore.kernel.org/all/20220817061704.4174272-1-kafai@fb.com/
v2:
- The previous v2 did not reach the list. It is a resend.
- Add comments on bpf_getsockopt() should not free
the saved_syn (Stanislav)
- Explicitly null-terminate the tcp-cc name (Stanislav)
====================
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch removes the __bpf_getsockopt() which directly
reads the sk by using PTR_TO_BTF_ID. Instead, the test now directly
uses the kernel bpf helper bpf_getsockopt() which supports all
the required optname now.
TCP_SAVE[D]_SYN and TCP_MAXSEG are not tested in a loop for all
the hooks and sock_ops's cb. TCP_SAVE[D]_SYN only works
in passive connection. TCP_MAXSEG only works when
it is setsockopt before the connection is established and
the getsockopt return value can only be tested after
the connection is established.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002937.2896904-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch changes bpf_getsockopt(SOL_IPV6) to reuse
do_ipv6_getsockopt(). It removes the duplicated code from
bpf_getsockopt(SOL_IPV6).
This also makes bpf_getsockopt(SOL_IPV6) supporting the same
set of optnames as in bpf_setsockopt(SOL_IPV6). In particular,
this adds IPV6_AUTOFLOWLABEL support to bpf_getsockopt(SOL_IPV6).
ipv6 could be compiled as a module. Like how other code solved it
with stubs in ipv6_stubs.h, this patch adds the do_ipv6_getsockopt
to the ipv6_bpf_stub.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002931.2896218-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch changes bpf_getsockopt(SOL_IP) to reuse
do_ip_getsockopt() and remove the duplicated code.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002925.2895416-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch changes bpf_getsockopt(SOL_TCP) to reuse
do_tcp_getsockopt(). It removes the duplicated code from
bpf_getsockopt(SOL_TCP).
Before this patch, there were some optnames available to
bpf_setsockopt(SOL_TCP) but missing in bpf_getsockopt(SOL_TCP).
For example, TCP_NODELAY, TCP_MAXSEG, TCP_KEEPIDLE, TCP_KEEPINTVL,
and a few more. It surprises users from time to time. This patch
automatically closes this gap without duplicating more code.
bpf_getsockopt(TCP_SAVED_SYN) does not free the saved_syn,
so it stays in sol_tcp_sockopt().
For string name value like TCP_CONGESTION, bpf expects it
is always null terminated, so sol_tcp_sockopt() decrements
optlen by one before calling do_tcp_getsockopt() and
the 'if (optlen < saved_optlen) memset(..,0,..);'
in __bpf_getsockopt() will always do a null termination.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002918.2894511-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch changes bpf_getsockopt(SOL_SOCKET) to reuse
sk_getsockopt(). It removes all duplicated code from
bpf_getsockopt(SOL_SOCKET).
Before this patch, there were some optnames available to
bpf_setsockopt(SOL_SOCKET) but missing in bpf_getsockopt(SOL_SOCKET).
It surprises users from time to time. For example, SO_REUSEADDR,
SO_KEEPALIVE, SO_RCVLOWAT, and SO_MAX_PACING_RATE. This patch
automatically closes this gap without duplicating more code.
The only exception is SO_BINDTODEVICE because it needs to acquire a
blocking lock. Thus, SO_BINDTODEVICE is not supported.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002912.2894040-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch moves the "#ifdef CONFIG_XXX" check into the "if/else"
statement itself. The change is done for the bpf_getsockopt()
function only. It will make the latter patches easier to follow
without the surrounding ifdef macro.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002906.2893572-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Similar to the earlier patch that changes sk_getsockopt() to
use sockopt_{lock,release}_sock() such that it can avoid taking the
lock when called from bpf. This patch also changes do_ipv6_getsockopt()
to use sockopt_{lock,release}_sock() such that bpf_getsockopt(SOL_IPV6)
can reuse do_ipv6_getsockopt().
Although bpf_getsockopt(SOL_IPV6) currently does not support optname
that requires lock_sock(), using sockopt_{lock,release}_sock()
consistently across *_getsockopt() will make future optname addition
harder to miss the sockopt_{lock,release}_sock() usage. eg. when
adding new optname that requires a lock and the new optname is
needed in bpf_getsockopt() also.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002859.2893064-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Similar to the earlier patch that changes sk_getsockopt() to
take the sockptr_t argument . This patch also changes
do_ipv6_getsockopt() to take the sockptr_t argument such that
a latter patch can make bpf_getsockopt(SOL_IPV6) to reuse
do_ipv6_getsockopt().
Note on the change in ip6_mc_msfget(). This function is to
return an array of sockaddr_storage in optval. This function
is shared between ipv6_get_msfilter() and compat_ipv6_get_msfilter().
However, the sockaddr_storage is stored at different offset of the
optval because of the difference between group_filter and
compat_group_filter. Thus, a new 'ss_offset' argument is
added to ip6_mc_msfget().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002853.2892532-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
Hans de Goede
Ville Syrjälä
ye xingchen
Yupeng Li
Huacai Chen
Ard Biesheuvel
David S. Miller
Oleksij Rempel
Zhengchao Shao
Wei Fang
André Apitzsch
Paul Durrant
Gustavo A. R. Silva
Greg Kroah-Hartman
GUO Zihua
Csókás Bence
Peng Fan
Alexei Starovoitov
Martin KaFai Lau