aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-08-29bpf, mips: No need to use min() to get MAX_TAIL_CALL_CNTTiezhu Yang2-2/+18
MAX_TAIL_CALL_CNT is 33, so min(MAX_TAIL_CALL_CNT, 0xffff) is always MAX_TAIL_CALL_CNT, it is better to use MAX_TAIL_CALL_CNT directly. At the same time, add BUILD_BUG_ON(MAX_TAIL_CALL_CNT > 0xffff) with a comment on why the assertion is there. Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Suggested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/1661742309-2320-1-git-send-email-yangtiezhu@loongson.cn
2022-08-29media: vb2: videobuf -> videobuf2Hans Verkuil5-20/+20
It is confusing to use the term 'videobuf' or 'video-buf' since that usually refers to the old videobuf version 1 framework. Rename to 'videobuf2' or vb2. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: media/pci/ngene/ngene.h: remove #ifdef NGENE_V4LHans Verkuil1-78/+0
Remove the dead code under NGENE_V4L. Among others, this removes references to the old videobuf framework that isn't actually used by this driver. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29USB: serial: option: add support for Cinterion MV32-WA/WB RmNet modeSlark Xiao1-0/+6
We added PIDs for MV32-WA/WB MBIM mode before, now we need to add support for RmNet mode. Test evidence as below: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f3 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F3 USB Mobile Broadband S: SerialNumber=d7b4be8d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f4 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F4 USB Mobile Broadband S: SerialNumber=d095087d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by: Slark Xiao <slark_xiao@163.com> [ johan: sort entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-29media: zoran: move to mainlineHans Verkuil22-22/+2
The zoran driver can be moved back to mainline after it has been converted by Corentin Labbe to vb2. Note that the zoran driver no longer supports video output, but video capture is working fine now. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: zoran: from VB2_READ/WRITE: read/write isn't supportedHans Verkuil1-1/+1
The read/write file operations are not implemented, so no need to set VB2_READ and VB2_WRITE flags. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: zoran: the video device is video capture only, not M2MHans Verkuil1-6/+1
Set vfl_dir correctly as a capture device instead of as a M2M device. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: zoran: fix checkpatch --strict issuesHans Verkuil13-520/+448
Prepare for moving this driver to mainline by fixing the remaining checkpatch issues. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: ti/omap: fix repeated words in commentswangjianli1-1/+1
Delete the redundant word 'the'. Signed-off-by: wangjianli <wangjianli@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: pci/cx23885: fix repeated words in commentswangjianli1-1/+1
Delete the redundant word 'of'. Signed-off-by: wangjianli <wangjianli@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: pci/cx18: fix repeated words in commentswangjianli1-1/+1
Delete the redundant word 'of'. Signed-off-by: wangjianli <wangjianli@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: pci/cx18: fix repeated words in commentswangjianli1-1/+1
Delete the redundant word 'of'. Signed-off-by: wangjianli <wangjianli@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: i2c/cx25840: fix repeated words in commentswangjianli1-1/+1
Delete the redundant word 'of'. Signed-off-by: wangjianli <wangjianli@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: v4l2-flash: Fix comment typoJason Wang1-1/+1
The double `the' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: technisat-usb2: Fix comment typoJason Wang1-1/+1
The double `is' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: drxk: Fix comment typoJason Wang1-1/+1
The double `for' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: v4l2-ioctl: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. [hverkuil: the the -> that the] Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: tm6000: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: gspca: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: platform: ti: Fix typo 'the the' in commentSlark Xiao2-2/+2
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: saa7164: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: ivtv: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: cx88: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: dvb-frontends: Fix typo 'the the' in commentSlark Xiao2-2/+2
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: sun6i-csi: Fix comment typoJason Wang1-1/+1
The double `the' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: dib8000: Fix comment typoJason Wang1-1/+1
The double `this' is duplicated in line 3215, remove one. [hverkuil: while we're at it, fix the 'succedeed' typo as well] Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: staging/media/av7110/av7110: Fix typo in stringLi zeming1-1/+1
Remove the repeated ',' from string Signed-off-by: Li zeming <zeming@nfschina.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: MAINTAINERS: add entry for i.MX8MP DW100 v4l2 mem2mem driverXavier Roumegue1-0/+9
Add myself as maintainer of the dw100 driver which offers hardware accelerated dewarping operations through a v4l2 mem2mem interface. Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: dw100: Add i.MX8MP dw100 dewarper driverXavier Roumegue6-0/+1844
Add a V4L2 mem-to-mem driver for the Vivante DW100 Dewarp Processor IP core found on i.MX8MP SoC. The processor core applies a programmable geometrical transformation on input images to correct distorsion introduced by lenses. The transformation function is exposed as a grid map with 16x16 pixel macroblocks indexed using X, Y vertex coordinates. The dewarping map can be set from application through a dedicated v4l2 control. If not set or invalid, the driver computes an identity map prior to starting the processing engine. The driver supports scaling, cropping and pixel format conversion. Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: dt-bindings: media: Add i.MX8MP DW100 bindingXavier Roumegue1-0/+69
Add DT binding documentation for the Vivante DW100 dewarper engine found on NXP i.MX8MP SoC Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: uapi: Add a control for DW100 driverXavier Roumegue2-0/+29
The DW100 driver gets the dewarping mapping as a binary blob from the userspace application through a custom control. The blob format is hardware specific so create a dedicated control for this purpose. Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: v4l: uapi: Add user control base for DW100 controlsXavier Roumegue1-0/+6
Add a control base for DW100 driver controls, and reserve 16 controls. Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: Documentation: dw100: Add user documentation for the DW100 driverXavier Roumegue2-0/+70
Add user documentation for the DW100 driver. while at it, replace spaces with tab on drivers list. Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: v4l2-ctrls: Export default v4l2_ctrl_type_ops callbacksXavier Roumegue2-13/+65
Export the callback functions of the default v4l2 control type operations such as a driver defining its own operations could reuse some of them. Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: v4l2-ctrls: optimize type_ops for arraysHans Verkuil3-58/+99
Initializing arrays and validating or checking for equality of arrays is suboptimal since it does this per element. Change the ops to operate on the whole payload to speed up array operations. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29USB: serial: ftdi_sio: add Omron CS1W-CIF31 device idNiek Nooijens2-0/+8
works perfectly with: modprobe ftdi_sio echo "0590 00b2" | tee /sys/module/ftdi_sio/drivers/usb-serial\:ftdi_sio/new_id > /dev/null but doing this every reboot is a pain in the ass. Signed-off-by: Niek Nooijens <niek.nooijens@omron.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-29USB: serial: option: add Quectel EM060K modemYonglin Tan1-0/+4
Add usb product id entry for the Quectel EM060K module. "MBIM mode": DIAG + NMEA + AT + MODEM + MBIM + QDSS T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030b Rev= 5.04 S: Manufacturer=Quectel S: Product=EM060K-GL S: SerialNumber=89fb57db C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 8 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 9 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 9 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#=12 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com> [ johan: mention QDSS port and sort entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-29ASoC: codecs: max98088: remove redundant ret variableJinpeng Cui1-3/+1
Return value from devm_snd_soc_register_component() directly instead of taking this in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn> Link: https://lore.kernel.org/r/20220829091319.266068-1-cui.jinpeng2@zte.com.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2022-08-29MIPS: loongson32: ls1c: Fix hang during startupYang Ling1-1/+0
The RTCCTRL reg of LS1C is obselete. Writing this reg will cause system hang. Fixes: 60219c563c9b6 ("MIPS: Add RTC support for Loongson1C board") Signed-off-by: Yang Ling <gnaygnil@gmail.com> Tested-by: Keguang Zhang <keguang.zhang@gmail.com> Acked-by: Keguang Zhang <keguang.zhang@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-08-29Merge drm/drm-next into drm-intel-nextJani Nikula12195-241292/+808725
Sync drm-intel-next with v6.0-rc as well as recent drm-intel-gt-next. Since drm-next does not have commit f0c70d41e4e8 ("drm/i915/guc: remove runtime info printing from time stamp logging") yet, only drm-intel-gt-next, will need to do that as part of the merge here to build. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-08-29drm/i915/guc: Remove log size module parametersJoonas Lahtinen3-19/+3
Remove the module parameters for configuring GuC log size. We should instead rely on tuning the defaults to be usable for reporting bugs. v2: - Use correct 1M unit Fixes: 8ad0152afb1b ("drm/i915/guc: Make GuC log sizes runtime configurable") Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220826092343.184568-1-joonas.lahtinen@linux.intel.com
2022-08-29Merge branch 'u64_stats-fixups'David S. Miller12-50/+51
Sebastian Andrzej Siewior says: ==================== net: u64_stats fixups for 32bit. while looking at the u64-stats patch https://lore.kernel.org/all/20220817162703.728679-10-bigeasy@linutronix.de I noticed that u64_stats_fetch_begin() is used. That suspicious thing about it is that network processing, including stats update, is performed in NAPI and so I would expect to see u64_stats_fetch_begin_irq() in order to avoid updates from NAPI during the read. This is only needed on 32bit-UP where the seqcount is not used. This is address in 2/2. The remaining user take some kind of precaution and may use u64_stats_fetch_begin(). I updated the previously mentioned patch to get rid of u64_stats_fetch_begin_irq(). If this is not considered stable patch worthy then it can be ignored and considred fixed by the other series which removes the special 32bit cases. The xrs700x driver reads and writes the counter from preemptible context so the only missing piece here is at least disable preemption on the writer side to avoid preemption while the writer is in progress. The possible reader would spin then until the writer completes its write critical section which is considered bad. This is addressed in 1/2 by using u64_stats_update_begin_irqsave() and so disable interrupts during the write critical section. The other closet resemblance I found is mdio_bus.c::mdiobus_stats_acct() where preemtion is disabled unconditionally. This is something I want to avoid since it also affects 64bit. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-29net: Use u64_stats_fetch_begin_irq() for stats fetch.Sebastian Andrzej Siewior11-48/+48
On 32bit-UP u64_stats_fetch_begin() disables only preemption. If the reader is in preemptible context and the writer side (u64_stats_update_begin*()) runs in an interrupt context (IRQ or softirq) then the writer can update the stats during the read operation. This update remains undetected. Use u64_stats_fetch_begin_irq() to ensure the stats fetch on 32bit-UP are not interrupted by a writer. 32bit-SMP remains unaffected by this change. Cc: "David S. Miller" <davem@davemloft.net> Cc: Catherine Sullivan <csully@google.com> Cc: David Awogbemila <awogbemila@google.com> Cc: Dimitris Michailidis <dmichail@fungible.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jeroen de Borst <jeroendb@google.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Simon Horman <simon.horman@corigine.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: oss-drivers@corigine.com Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-29net: dsa: xrs700x: Use irqsave variant for u64 stats updateSebastian Andrzej Siewior1-2/+3
xrs700x_read_port_counters() updates the stats from a worker using the u64_stats_update_begin() version. This is okay on 32-UP since on the reader side preemption is disabled. On 32bit-SMP the writer can be preempted by the reader at which point the reader will spin on the seqcount until writer continues and completes the update. Assigning the mib_mutex mutex to the underlying seqcount would ensure proper synchronisation. The API for that on the u64_stats_init() side isn't available. Since it is the only user, just use disable interrupts during the update. Use u64_stats_update_begin_irqsave() on the writer side to ensure an uninterrupted update. Fixes: ee00b24f32eb8 ("net: dsa: add Arrow SpeedChips XRS700x driver") Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-29USB: serial: option: add support for OPPO R11 diag portYan Xinyu1-0/+5
Add support for OPPO R11 USB diag serial port to option driver. This phone uses Qualcomm Snapdragon 660 SoC. usb-devices output: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22d9 ProdID=276c Rev=04.04 S: Manufacturer=OPPO S: Product=SDM660-MTP _SN:09C6BCA7 S: SerialNumber=beb2c403 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs Signed-off-by: Yan Xinyu <sdlyyxy@bupt.edu.cn> Link: https://lore.kernel.org/r/20220714102037.4113889-1-sdlyyxy@bupt.edu.cn Link: https://lore.kernel.org/r/Yt1WfSZk03Plpnan@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-29Merge branch 'sparx5-mrouter'David S. Miller5-84/+229
Casper Andersson says: ==================== net: sparx5: add mrouter support This series adds support for multicast router ports to SparX5. To manage mrouter ports the driver must keep track of mdb entries. When adding an mrouter port the driver has to iterate over all mdb entries and modify them accordingly. v2: - add bailout in free_mdb - re-arrange mdb struct to avoid holes - change devm_kzalloc -> kzalloc - change GFP_ATOMIC -> GFP_KERNEL - fix spelling ==================== Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-29net: sparx5: add support for mrouter portsCasper Andersson4-7/+80
All multicast should be forwarded to mrouter ports. Mrouter ports must therefore be part of all active multicast groups, and override flooding from being disabled. Signed-off-by: Casper Andersson <casper.casan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-29net: sparx5: add list for mdb entries in driverCasper Andersson3-82/+132
Keep track of all mdb entries in software for easy access. Signed-off-by: Casper Andersson <casper.casan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-29ethernet: Add helpers to recognize addresses mapped to IP multicastCasper Andersson1-0/+22
IP multicast must sometimes be discriminated from non-IP multicast, e.g. when determining the forwarding behavior of a given group in the presence of multicast router ports on an offloaded bridge. Therefore, provide helpers to identify these groups. Signed-off-by: Casper Andersson <casper.casan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-29genetlink: start to validate reserved header bytesJakub Kicinski47-2/+56
We had historically not checked that genlmsghdr.reserved is 0 on input which prevents us from using those precious bytes in the future. One use case would be to extend the cmd field, which is currently just 8 bits wide and 256 is not a lot of commands for some core families. To make sure that new families do the right thing by default put the onus of opting out of validation on existing families. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel) Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.