| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Since the stub version of of_dma_configure_id() was added in commit
a081bd4af4ce ("of/device: Add input id to of_dma_configure()"), it has
not matched the signature of the full function, leading to build failure
reports when code using this function is built on !OF configurations.
Fixes: a081bd4af4ce ("of/device: Add input id to of_dma_configure()")
Cc: stable@vger.kernel.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20220824153256.1437483-1-thierry.reding@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Make OF unittest trigger the new TAINT_TEST taint when OF unittest runs.
Due to OF unittest not being intended to run on production systems, and
potentially causing problems (or security issues like leaking kernel
addresses), the kernel's state should not be considered safe for
production use after OF unittest runs.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20220823200152.3465751-1-frowand.list@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The workflow example code is not working since it got the file names
wrong. So fix this.
Fixes: b18402726bd1 ("Docs/admin-guide/mm/damon/usage: document DAMON sysfs interface")
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Kairui Song <kasong@tencent.com>
Link: https://lore.kernel.org/r/20220823114053.53305-1-ryncsn@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The helper value is ABI as defined by enum bpf_func_id.
As bpf_helper_defs.h is used for the userpace part, it must be consistent
with this enum.
Before this change the comments order was used by the bpf_doc script in
order to set the helper values defined in the helpers file.
When adding new helpers it is very puzzling when the userspace application
breaks in weird places if the comment is inserted instead of appended -
because the generated helper ABI is incorrect and shifted.
This commit sets the helper value to the enum value.
In addition it is currently the practice to have the comments appended
and kept in the same order as the enum. As such, add an assertion
validating the comment order is consistent with enum value.
In case a different comments ordering is desired, this assertion can
be lifted.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220824181043.1601429-1-eyal.birger@gmail.com
|
|
A quick 'grep "5\.x" . -R' on Documentation shows that README.rst,
2.Process.rst and applying-patches.rst all mention the version number "5.x"
for kernel releases.
As the next release will be version 6.0, updating the version number to 6.x
in README.rst seems reasonable.
The description in 2.Process.rst is just a description of recent kernel
releases, it was last updated in the beginning of 2020, and can be
revisited at any time on a regular basis, independent of changing the
version number from 5 to 6. So, there is no need to update this document
now when transitioning from 5.x to 6.x numbering.
The document applying-patches.rst is probably obsolete for most users
anyway, a reader will sufficiently well understand the steps, even it
mentions version 5 rather than version 6. So, do not update that to a
version 6.x numbering scheme.
Update version number from 5.x to 6.x in README.rst only.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220824080836.23087-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
When `data` points to a boolean value, casting it to `int *` is problematic
and could lead to a wrong value being passed to `jsonw_bool`. Change the
cast to `bool *` instead.
Fixes: b12d6ec09730 ("bpf: btf: add btf print functionality")
Signed-off-by: Lam Thai <lamthai@arista.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220824225859.9038-1-lamthai@arista.com
|
|
Hao Luo says:
====================
This patch series allows for using bpf to collect hierarchical cgroup
stats efficiently by integrating with the rstat framework. The rstat
framework provides an efficient way to collect cgroup stats percpu and
propagate them through the cgroup hierarchy.
The stats are exposed to userspace in textual form by reading files in
bpffs, similar to cgroupfs stats by using a cgroup_iter program.
cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only a single object.
When attaching cgroup_iter, one needs to set a cgroup to the iter_link
created from attaching. This cgroup can be passed either as a file
descriptor or a cgroup id. That cgroup serves as the starting point of
the walk.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
** Background on rstat for stats collection **
(I am using a subscriber analogy that is not commonly used)
The rstat framework maintains a tree of cgroups that have updates and
which cpus have updates. A subscriber to the rstat framework maintains
their own stats. The framework is used to tell the subscriber when
and what to flush, for the most efficient stats propagation. The
workflow is as follows:
- When a subscriber updates a cgroup on a cpu, it informs the rstat
framework by calling cgroup_rstat_updated(cgrp, cpu).
- When a subscriber wants to read some stats for a cgroup, it asks
the rstat framework to initiate a stats flush (propagation) by calling
cgroup_rstat_flush(cgrp).
- When the rstat framework initiates a flush, it makes callbacks to
subscribers to aggregate stats on cpus that have updates, and
propagate updates to their parent.
Currently, the main subscribers to the rstat framework are cgroup
subsystems (e.g. memory, block). This patch series allow bpf programs to
become subscribers as well.
Patches in this series are organized as follows:
* Patches 1-2 introduce cgroup_iter prog, and a selftest.
* Patches 3-5 allow bpf programs to integrate with rstat by adding the
necessary hook points and kfunc. A comprehensive selftest that
demonstrates the entire workflow for using bpf and rstat to
efficiently collect and output cgroup stats is added.
---
Changelog:
v8 -> v9:
- Make UNSPEC (an invalid option) as the default order for cgroup_iter.
- Use enum for specifying cgroup_iter order, instead of u32.
- Add BPF_ITER_RESHCED to cgroup_iter.
- Add cgroup_hierarchical_stats to s390x denylist.
v7 -> v8:
- Removed the confusing BPF_ITER_DEFAULT (Andrii)
- s/SELF/SELF_ONLY/g
- Fixed typo (e.g. outputing) (Andrii)
- Use "descendants_pre", "descendants_post" etc. instead of "pre",
"post" (Andrii)
v6 -> v7:
- Updated commit/comments in cgroup_iter for read() behavior (Yonghong)
- Extracted BPF_ITER_SELF and other options out of cgroup_iter, so
that they can be used in other iters. Also renamed them. (Andrii)
- Supports both cgroup_fd and cgroup_id when specifying target cgroup.
(Andrii)
- Avoided using macro for formatting expected output in cgroup_iter
selftest. (Andrii)
- Applied 'static' on all vars and functions in cgroup_iter selftest.
(Andrii)
- Fixed broken buf reading in cgroup_iter selftest. (Andrii)
- Switched to use bpf_link__destroy() unconditionally. (Andrii)
- Removed 'volatile' for non-const global vars in selftests. (Andrii)
- Started using bpf_core_enum_value() to get memory_cgrp_id. (Andrii)
v5 -> v6:
- Rebased on bpf-next
- Tidy up cgroup_hierarchical_stats test (Andrii)
* 'static' and 'inline'
* avoid using libbpf_get_error()
* string literals of cgroup paths.
- Rename patch 8/8 to 'selftests/bpf' (Yonghong)
- Fix cgroup_iter comments (e.g. PAGE_SIZE and uapi) (Yonghong)
- Make sure further read() returns OK after previous read() finished
properly (Yonghong)
- Release cgroup_mutex before the last call of show() (Kumar)
v4 -> v5:
- Rebased on top of new kfunc flags infrastructure, updated patch 1 and
patch 6 accordingly.
- Added docs for sleepable kfuncs.
v3 -> v4:
- cgroup_iter:
* reorder fields in bpf_link_info to avoid break uapi (Yonghong)
* comment the behavior when cgroup_fd=0 (Yonghong)
* comment on the limit of number of cgroups supported by cgroup_iter.
(Yonghong)
- cgroup_hierarchical_stats selftest:
* Do not return -1 if stats are not found (causes overflow in userspace).
* Check if child process failed to join cgroup.
* Make buf and path arrays in get_cgroup_vmscan_delay() static.
* Increase the test map sizes to accomodate cgroups that are not
created by the test.
v2 -> v3:
- cgroup_iter:
* Added conditional compilation of cgroup_iter.c in kernel/bpf/Makefile
(kernel test) and dropped the !CONFIG_CGROUP patch.
* Added validation of traversal_order when attaching (Yonghong).
* Fixed previous wording "two modes" to "three modes" (Yonghong).
* Fixed the btf_dump selftest broken by this patch (Yonghong).
* Fixed ctx_arg_info[0] to use "PTR_TO_BTF_ID_OR_NULL" instead of
"PTR_TO_BTF_ID", because the "cgroup" pointer passed to iter prog can
be null.
- Use __diag_push to eliminate __weak noinline warning in
bpf_rstat_flush().
- cgroup_hierarchical_stats selftest:
* Added write_cgroup_file_parent() helper.
* Added error handling for failed map updates.
* Added null check for cgroup in vmscan_flush.
* Fixed the signature of vmscan_[start/end].
* Correctly return error code when attaching trace programs fail.
* Make sure all links are destroyed correctly and not leaking in
cgroup_hierarchical_stats selftest.
* Use memory.reclaim instead of memory.high as a more reliable way to
invoke reclaim.
* Eliminated sleeps, the test now runs faster.
v1 -> v2:
- Redesign of cgroup_iter from v1, based on Alexei's idea [1]:
* supports walking cgroup subtree.
* supports walking ancestors of a cgroup. (Andrii)
* supports terminating the walk early.
* uses fd instead of cgroup_id as parameter for iter_link. Using fd is
a convention in bpf.
* gets cgroup's ref at attach time and deref at detach.
* brought back cgroup1 support for cgroup_iter.
- Squashed the patches adding the rstat flush hook points and kfuncs
(Tejun).
- Added a comment explaining why bpf_rstat_flush() needs to be weak
(Tejun).
- Updated the final selftest with the new cgroup_iter design.
- Changed CHECKs in the selftest with ASSERTs (Yonghong, Andrii).
- Removed empty line at the end of the selftest (Yonghong).
- Renamed test files to cgroup_hierarchical_stats.c.
- Reordered CGROUP_PATH params order to match struct declaration
in the selftest (Michal).
- Removed memory_subsys_enabled() and made sure memcg controller
enablement checks make sense and are documented (Michal).
RFC v2 -> v1:
- Instead of introducing a new program type for rstat flushing, add an
empty hook point, bpf_rstat_flush(), and use fentry bpf programs to
attach to it and flush bpf stats.
- Instead of using helpers, use kfuncs for rstat functions.
- These changes simplify the patchset greatly, with minimal changes to
uapi.
RFC v1 -> RFC v2:
- Instead of rstat flush programs attach to subsystems, they now attach
to rstat (global flushers, not per-subsystem), based on discussions
with Tejun. The first patch is entirely rewritten.
- Pass cgroup pointers to rstat flushers instead of cgroup ids. This is
much more flexibility and less likely to need a uapi update later.
- rstat helpers are now only defined if CGROUP_CONFIG.
- Most of the code is now only defined if CGROUP_CONFIG and
CONFIG_BPF_SYSCALL.
- Move rstat helper protos from bpf_base_func_proto() to
tracing_prog_func_proto().
- rstat helpers argument (cgroup pointer) is now ARG_PTR_TO_BTF_ID, not
ARG_ANYTHING.
- Rewrote the selftest to use the cgroup helpers.
- Dropped bpf_map_lookup_percpu_elem (already added by Feng).
- Dropped patch to support cgroup v1 for cgroup_iter.
- Dropped patch to define some cgroup_put() when !CONFIG_CGROUP. The
code that calls it is no longer compiled when !CONFIG_CGROUP.
cgroup_iter was originally introduced in a different patch series[2].
Hao and I agreed that it fits better as part of this series.
RFC v1 of this patch series had the following changes from [2]:
- Getting the cgroup's reference at the time at attaching, instead of
at the time when iterating. (Yonghong)
- Remove .init_seq_private and .fini_seq_private callbacks for
cgroup_iter. They are not needed now. (Yonghong)
[1] https://lore.kernel.org/bpf/20220520221919.jnqgv52k4ajlgzcl@MBP-98dd607d3435.dhcp.thefacebook.com/
[2] https://lore.kernel.org/lkml/20220225234339.2386398-9-haoluo@google.com/
Hao Luo (2):
bpf: Introduce cgroup iter
selftests/bpf: Test cgroup_iter.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a selftest that tests the whole workflow for collecting,
aggregating (flushing), and displaying cgroup hierarchical stats.
TL;DR:
- Userspace program creates a cgroup hierarchy and induces memcg reclaim
in parts of it.
- Whenever reclaim happens, vmscan_start and vmscan_end update
per-cgroup percpu readings, and tell rstat which (cgroup, cpu) pairs
have updates.
- When userspace tries to read the stats, vmscan_dump calls rstat to flush
the stats, and outputs the stats in text format to userspace (similar
to cgroupfs stats).
- rstat calls vmscan_flush once for every (cgroup, cpu) pair that has
updates, vmscan_flush aggregates cpu readings and propagates updates
to parents.
- Userspace program makes sure the stats are aggregated and read
correctly.
Detailed explanation:
- The test loads tracing bpf programs, vmscan_start and vmscan_end, to
measure the latency of cgroup reclaim. Per-cgroup readings are stored in
percpu maps for efficiency. When a cgroup reading is updated on a cpu,
cgroup_rstat_updated(cgroup, cpu) is called to add the cgroup to the
rstat updated tree on that cpu.
- A cgroup_iter program, vmscan_dump, is loaded and pinned to a file, for
each cgroup. Reading this file invokes the program, which calls
cgroup_rstat_flush(cgroup) to ask rstat to propagate the updates for all
cpus and cgroups that have updates in this cgroup's subtree. Afterwards,
the stats are exposed to the user. vmscan_dump returns 1 to terminate
iteration early, so that we only expose stats for one cgroup per read.
- An ftrace program, vmscan_flush, is also loaded and attached to
bpf_rstat_flush. When rstat flushing is ongoing, vmscan_flush is invoked
once for each (cgroup, cpu) pair that has updates. cgroups are popped
from the rstat tree in a bottom-up fashion, so calls will always be
made for cgroups that have updates before their parents. The program
aggregates percpu readings to a total per-cgroup reading, and also
propagates them to the parent cgroup. After rstat flushing is over, all
cgroups will have correct updated hierarchical readings (including all
cpus and all their descendants).
- Finally, the test creates a cgroup hierarchy and induces memcg reclaim
in parts of it, and makes sure that the stats collection, aggregation,
and reading workflow works as expected.
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-6-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch extends bpf selft cgroup_helpers [ID] n various ways:
- Add enable_controllers() that allows tests to enable all or a
subset of controllers for a specific cgroup.
- Add join_cgroup_parent(). The cgroup workdir is based on the pid,
therefore a spawned child cannot join the same cgroup hierarchy of the
test through join_cgroup(). join_cgroup_parent() is used in child
processes to join a cgroup under the parent's workdir.
- Add write_cgroup_file() and write_cgroup_file_parent() (similar to
join_cgroup_parent() above).
- Add get_root_cgroup() for tests that need to do checks on root cgroup.
- Distinguish relative and absolute cgroup paths in function arguments.
Now relative paths are called relative_path, and absolute paths are
called cgroup_path.
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-5-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Enable bpf programs to make use of rstat to collect cgroup hierarchical
stats efficiently:
- Add cgroup_rstat_updated() kfunc, for bpf progs that collect stats.
- Add cgroup_rstat_flush() sleepable kfunc, for bpf progs that read stats.
- Add an empty bpf_rstat_flush() hook that is called during rstat
flushing, for bpf progs that flush stats to attach to. Attaching a bpf
prog to this hook effectively registers it as a flush callback.
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-4-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a selftest for cgroup_iter. The selftest creates a mini cgroup tree
of the following structure:
ROOT (working cgroup)
|
PARENT
/ \
CHILD1 CHILD2
and tests the following scenarios:
- invalid cgroup fd.
- pre-order walk over descendants from PARENT.
- post-order walk over descendants from PARENT.
- walk of ancestors from PARENT.
- process only a single object (i.e. PARENT).
- early termination.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-3-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Return the value from driver_register() directly instead of storing it
in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Originally, when there was some custom ASL needed for Linux, the
guidance for Linux-friendly OEMs was to introduced a new string in the
APCI tables and discuss it on the kernel mailing lists.
This lead to 3 strings being introduced. Those strings now have the
original problems fixed in the kernel and have since been removed.
The kernel no longer advertises any custom Linux-* _OSI strings for
OEM use.
It was discovered that these removed strings were actually being abused
to detect Linux for unrelated reasons, so drop the encouragement for
new ones to be added.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This string was introduced because drivers for NVIDIA hardware
didn't handle mux control properly.
This was fixed by commit 8e55f99c510f ("drm/i915: Invoke another _DSM
to enable MUX on HP Workstation laptops"), so vendors shouldn't be
using this string to modify ASL any more.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This string was introduced because drivers for NVIDIA hardware
didn't handle HDMI properly.
This was fixed by commit b516ea586d71 ("PCI: Enable NVIDIA HDA
controllers"), so vendors shouldn't be using this string to modify
ASL any more.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This string was introduced because drivers for NVIDIA hardware
had bugs supporting RTD3 in the past.
Before proprietary NVIDIA driver started to support RTD3, Ubuntu had
had a mechanism for switching PRIME on and off, though it had required
to logout/login to make the library switch happen.
When the PRIME had been off, the mechanism had unloaded the NVIDIA
driver and put the device into D3cold, but the GPU had never come back
to D0 again which is why ODMs used the _OSI to expose an old _DSM
method to switch the power on/off.
That has been fixed by commit 5775b843a619 ("PCI: Restore config space
on runtime resume despite being unbound"). so vendors shouldn't be
using this string to modify ASL any more.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Unlike the Xe_HP platforms, MTL only has a single CCS engine; the
quad-based engine masking logic does not apply to this platform (or
presumably any future platforms that only have 0 or 1 CCS).
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220818234202.451742-5-radhakrishna.sripada@intel.com
|
|
Previously only dgfx platforms had a 4MB MMIO range, but starting with
MTL we now use the larger range for all platforms.
Bspec: 63834, 63830
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220818234202.451742-4-radhakrishna.sripada@intel.com
|
|
Bit12 of the Forcewake request register should not be cleared post
gen12. Do not touch this bit while clearing during fw domain reset.
v2: Tweak the comment to drop older platforms(MattR)
Bspec: 52542
Signed-off-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817224304.255767-1-radhakrishna.sripada@intel.com
|
|
The mmVM_L2_CNTL3 register is not assigned an initial value
Signed-off-by: Qu Huang <jinsdb@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable GFX11 MGCG perfmon setting.
V2: set rlc to saft mode before setting.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Correct the isa version for handling KFD test.
Fixes: 7c4f4f197e0c ("drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions")
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When translate_further is enabled, page table depth needs to
be updated. This was missing on Arcturus MMHUB init. This was
causing address translations to fail for SDMA user-mode queues.
Fixes: 352e683b72e7 ("drm/amdgpu: Enable translate_further to extend UTCL2 reach")
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To fit the latest 78.53 PMFW.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For some ASICs, like GFX IP v11.0.1, only have one SDMA instance,
so not need to configure SDMA1_RLC_CGCG_CTRL for this case.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
DCN314 supports PCON.
[How]
Explicitly enable it in dcn314 resources.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable AMD_CG_SUPPORT_BIF_MGCG and AMD_CG_SUPPORT_BIF_LS support.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add BIF Clock Gating MGCG and LS support for NBIO IP v7.7.0.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the BIF0_PCIE_TX_POWER_CTRL_1 register offset and mask macro
definitions for AMD_CG_SUPPORT_BIF_LS.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull another cgroup fix from Tejun Heo:
"Commit 4f7e7236435c ("cgroup: Fix threadgroup_rwsem <->
cpus_read_lock() deadlock") required the cgroup
core to grab cpus_read_lock() before invoking ->attach().
Unfortunately, it missed adding cpus_read_lock() in
cgroup_attach_task_all(). Fix it"
* tag 'cgroup-for-6.0-rc2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Add missing cpus_read_lock() to cgroup_attach_task_all()
|
|
syzbot is hitting percpu_rwsem_assert_held(&cpu_hotplug_lock) warning at
cpuset_attach() [1], for commit 4f7e7236435ca0ab ("cgroup: Fix
threadgroup_rwsem <-> cpus_read_lock() deadlock") missed that
cpuset_attach() is also called from cgroup_attach_task_all().
Add cpus_read_lock() like what cgroup_procs_write_start() does.
Link: https://syzkaller.appspot.com/bug?extid=29d3a3b4d86c8136ad9e [1]
Reported-by: syzbot <syzbot+29d3a3b4d86c8136ad9e@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 4f7e7236435ca0ab ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock")
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This patch fix cocci warning:
drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c:1816:6-8:
WARNING: possible condition with no effect (if == else).
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch fix cocci warning:
drivers/gpu/drm/amd/display/dc/core/dc.c:3335:2-4: WARNING:
possible condition with no effect (if == else).
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch fix potential memory leak (clk_src) when function run
into last return NULL.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch fix potential memory leak (clk_src) when function run
into last return NULL.
s/free/kfree/ - Alex
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The mmVM_L2_CNTL3 register is not assigned an initial value
Signed-off-by: Qu Huang <jinsdb@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
According to the ACPI specification [1], the ACPI_FADT_LOW_POWER_S0
flag merely means that it is better to use low-power S0 idle on the
given platform than S3 (provided that the latter is supported) and it
doesn't preclude using either of them (which of them will be used
depends on the choices made by user space).
However, on some systems that flag is used to indicate whether or not
to enable special firmware mechanics allowing the system to save more
energy when suspended to idle. If that flag is unset, doing so is
generally risky.
Accordingly, add a comment to explain the ACPI_FADT_LOW_POWER_S0 check
in amdgpu_acpi_is_s0ix_active(), the purpose of which is otherwise
somewhat unclear.
Link: https://uefi.org/specs/ACPI/6.4/05_ACPI_Software_Programming_Model/ACPI_Software_Programming_Model.html#fixed-acpi-description-table-fadt # [1]
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
time_after() deals with timer wrapping correctly.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
'free PSP TMR buffer' happens in suspend, but sometimes
in mGPU config, it mixes with PSP resume log printing from
another GPU, which is confusing. So use dev_info instead of
DRM_INFO for printing.
[drm] PSP is resuming...
[drm] reserve 0xa00000 from 0x877e000000 for PSP TMR
amdgpu 0000:e3:00.0: amdgpu: GECC is enabled
amdgpu 0000:e3:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
amdgpu 0000:e3:00.0: amdgpu: SMU is resuming...
amdgpu 0000:e3:00.0: amdgpu: smu driver if version = 0x00000040, smu fw if version = 0x00000041, smu fw program = 0, version = 0x003a5400 (58.84.0)
amdgpu 0000:e3:00.0: amdgpu: SMU driver if version not matched
amdgpu 0000:e3:00.0: amdgpu: dpm has been enabled
amdgpu 0000:e3:00.0: amdgpu: SMU is resumed successfully!
[drm] DMUB hardware initialized: version=0x02020014
[drm] free PSP TMR buffer
[drm] kiq ring mec 2 pipe 1 q 0
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
adev_to_drm is used everywhere in amdgpu code, so modify
it to keep consistency.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable GFX11 MGCG perfmon setting.
V2: set rlc to saft mode before setting.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Avoid soft reset, even ip hang check (ring/ib test) when gpu recovery
disabled.
v2: add missing "}"
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Correct the isa version for handling KFD test.
Fixes: 7c4f4f197e0c ("drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions")
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When translate_further is enabled, page table depth needs to
be updated. This was missing on Arcturus MMHUB init. This was
causing address translations to fail for SDMA user-mode queues.
Fixes: 352e683b72e7 ("drm/amdgpu: Enable translate_further to extend UTCL2 reach")
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Only allocate doorbells when the first queue is created on a GPU or the
doorbells need to be mapped into CPU or GPU virtual address space. This
avoids allocating doorbells unnecessarily and can allow more processes
to use KFD on multi-GPU systems.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Kent Russell <kent.Russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To fit the latest 78.53 PMFW.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We have 2 back-to-back checks for skipping connectors.
Logically one of them will do the job.
[How]
Remove redundant check.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Adding log for clock table from SMU helps with the debugging process.
Implemented using DC_LOG_SMU to output log.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
Uncomment scaling cmd assignment since
FW headers are now promoted.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
Thierry Reding
Frank Rowand
Kairui Song
Eyal Birger
Lukas Bulwahn
Lam Thai
Alexei Starovoitov
Yosry Ahmed
Hao Luo
ye xingchen
Mario Limonciello
Matt Roper
Radhakrishna Sripada
Qu Huang
Likun Gao
Prike Liang
Mukul Joshi
Evan Quan
Tim Huang
Roman Li
Linus Torvalds
Tetsuo Handa
Bernard Zhao
Rafael J. Wysocki
Yu Zhe
Guchun Chen
Chengming Gui
Felix Kuehling
Leo Chen
Alvin Lee