| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The functions for reporting rx management take many arguments.
Collect all the arguments into a struct, which also make it easier
to add more arguments if needed.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a function for reporting TX status with hardware timestamps. This
function shall be used for reporting the TX status of Timing
measurement and Fine timing measurement action frames by devices that
support reporting hardware timestamps.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add attributes for reporting hardware timestamps for management frames
RX and TX. These attributes will be used for reporting hardware
timestamps for Timing measurement and Fine Timing Measurement action
frames, which will allow userspace applications to measure the path
delay between devices and sync clocks.
For TX, these attributes are used for reporting the frame RX time and
the ack TX time. For TX, they are used for reporting the frame TX time
and the ack RX time.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add helper functions for detection timing measurement
and fine timing measurement frames.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For wmediumd/virtio, handle both the RX channel for links,
as well as the link addresses when links are added/removed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When inserting a link STA, make sure it doesn't exist first
and add lockdep assertions that we cannot modify the hash
table without holding the sta_mtx, so this check is really
correct.
Also return without hashing if the driver failed, and warn
if the hashing fails, which shouldn't happen due to the
check described above.
Fixes: cb71f1d136a6 ("wifi: mac80211: add sta link addition/removal")
Fixes: ba6ddab94fc6 ("wifi: mac80211: maintain link-sta hash table")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We need to copy the address to both the private and public
portion of the link_sta (the private one is needed for the
hash table). Fix this.
Fixes: bbe90107e1d9 ("wifi: mac80211: mlme: refactor link station setup")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Clarify the link ID behaviour in control port TX, we need it
to select the link to transmit on for both MLD and non-MLD
receivers, but select the link address as the SA only if the
receiver is not an MLD.
Fixes: 67207bab9341 ("wifi: cfg80211/mac80211: Support control port TX from specific link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the frame is going to be dropped anyway because
ieee80211_lookup_ra_sta() returned an error (and
even though it's a bit racy, it will likely continue
to do so), return the error out instead of just
silently dropping the frame.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We always need the MLD address and link ID to add or
modify the link STA, so require it in the API.
Fixes: 577e5b8c3924 ("wifi: cfg80211: add API to add/modify/remove a link station")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add more sanity checks to the API handling, we shouldn't
be able to create a station without links, nor should we
be able to add a link to a station that wasn't created as
an MLD with links in the first place.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are two issues here: we unhash the link stations only
directly before freeing the station they belong to, and we
also don't unhash all the links correctly in all cases. Fix
these issues.
Fixes: ba6ddab94fc6 ("wifi: mac80211: maintain link-sta hash table")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When modifying a link station, validate that the link address
doesn't change, except the first time the link is created.
Fixes: b95eb7f0eee4 ("wifi: cfg80211/mac80211: separate link params from station params")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
At this point, we've already changed link_id to be zero for
a non-MLO connection, so use the 'mlo' variable rather than
link ID to determine the MLO status of the station.
Fixes: bd363ee53302 ("wifi: mac80211: mlme: set sta.mlo correctly")
Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If there's a non-MLO client, the A2 must be set to the BSSID
of the link since no translation will happen in lower layers
and it's needed that way for encryption.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are two issues here: we need to do the translation
even in case mac80211 selected a link, and we should only
translate the A3 if it's the BSSID. Fix both.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We should only translate addr3 here if it's the BSSID.
Fixes: 42fb9148c078 ("wifi: mac80211: do link->MLD address translation on RX")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If we have a non-MLD STA on an AP MLD, we crash while
adding the station. Fix that, in this case we need to
use the STA's address also on the link data structure.
Fixes: f36fe0a2df03 ("wifi: mac80211: fix up link station creation/insertion")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In my previous changes here, I neglected to take the old
conn_flags into account that might still be present from
the authentication, and thus ieee80211_setup_assoc_link()
can misbehave, as well as the override calculation being
wrong. Fix that by ORing in the old flags.
Fixes: 1845c1d4a455 ("wifi: mac80211: mlme: refactor assoc link setup")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In a few places we need to use the AP (MLD) address, not the
deflink BSSID, the link address translation will happen later.
To make that work properly for fast-xmit, set up the ap_addr
in the vif.cfg earlier.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Krzysztof Halasa has kept the cns3xxx platform working for a long time
but has moved away from working on it. The OpenWRT port was dropped in
2020, and support for the Gateworks Laguna platform never made it into
the mainline kernel, which only supports the reference design.
Further, the ARM11MPCore has an unresolved issue with instruction cache
coherency, and removing support for the remaining platforms using this
core would be the easiest solution.
Mark the entire platform as unused now, to be removed in early 2023 if
no users show up.
Cc: Krzysztof Halasa <khalasa@piap.pl>
Link: https://lore.kernel.org/lkml/20210616152326.GG22278@shell.armlinux.org.uk/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The iop32x platform has recently been converted to be part of
the multiplatform configuration, and it should be possible to
keep it alive for longer by making it boot from devicetree like
we did for the related ixp4xx platform.
However, it appears that no users remain at this point, so just
mark the entire platform depending on CONFIG_UNUSED_BOARD_FILES,
with the intention of removing it in early 2023.
If any users remain, please speak up now.
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The s3c24xx platform is already scheduled for removal in early 2023,
with s3c64xx meeting the same fate a year later.
Most of the s3c64xx board files appear to be unused, as the better
maintained ones already got converted to DT. The main exception is
the Wolfson Cragganmore board, which remains in use as the reference
design for Wolfson/Cirrus devices. As the other boards get removed,
this one stays around along with the DT based machines.
The s3c6400_defconfig file now disables the unused boards, while the
s3c24xx defconfig files all turn on CONFIG_UNUSED_BOARD_FILES to
remain usable.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Legacy board files with no known users are planned to get removed in
early 2023, and this covers the majority of the omap1 boards as well.
According to Tony, the actual users are all on OSK, Nokia770, and
AMS-Delta. Additionally, the sx1 and palmte boards are supported by qemu,
which is convenient for testing, so all five stay around past the initial
board removal.
As omap1 is now part of the multiplatform build and uses the common-clk
framework, it has become easier to convert these to use devicetree
based booting in the future.
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Most Arm board files are unused and will be removed in early
2023 if no remaining users show up. For the sa1100 platform,
the machines that are still in use are:
- Russell's Assabet development board
- Linus' H3600 iPaq PocketPC
- Collie as the only qemu-supported board, to allow
testing by others
All remaining sa1100 boards are marked to depend on
CONFIG_UNUSED_BOARD_FILES to give potential users a
last chance to speak up.
Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If something has already set up the DPU before the komeda driver comes
up, it will fail to init because it was just writing to the SRST bit in
the GCU control register and ignoring others. This resulted in TBU
bringup stalling and init failing. By writing completely we also set the
mode back to 0 (inactive) too and thus TBU bringup works.
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220606114714.175499-2-carsten.haitzler@foss.arm.com
|
|
The komeda driver doesn't come up with a visible text (FB) mode VT by
default as it was missing legacy FB support. It's useful to have a
working text VT on a system for debug and general usability, so enable
it. You can always toggle CONFIG_FRAMEBUFFER_CONSOLE.
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220606114714.175499-1-carsten.haitzler@foss.arm.com
|
|
Since we no longer need to conform to the structure of the various DRM
IRQ callbacks, we can streamline the code by consolidating the piecemeal
functions and passing around our private data structure directly. We're
also a platform device so should never see IRQ_NOTCONNECTED either.
Furthermore we can also get rid of all the unnecesary read-modify-write
operations, since on install we know we cleared the whole interrupt mask
before enabling the debug IRQs, and thus on uninstall we're always
clearing everything as well.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/65cf7818b23c1a8629dc851f1d058ecb8a14849e.1655309413.git.robin.murphy@arm.com
|
|
The Arm Juno board EDK2 port has provided an EFI GOP display via HDLCD0
for some time now, which works nicely as an early framebuffer. However,
once the HDLCD driver probes and takes over the hardware, it should
take over the logical framebuffer as well, otherwise the now-defunct GOP
device hangs about and virtual console output inevitably disappears into
the wrong place most of the time.
We'll do this after binding the HDMI encoder, since that's the most
likely thing to fail, and the EFI console is still better than nothing
when that happens. However, the two HDLCD controllers on Juno are
independent, and many users will still be using older firmware without
any display support, so we'll only bother if we find that the HDLCD
we're probing is already enabled. And if it is, then we'll also stop it,
since otherwise the display can end up shifted if it's still scanning
out while the rest of the registers are subsequently reconfigured.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/31acd57f4aa8a4d02877026fa3a8c8d035e15a0d.1655309004.git.robin.murphy@arm.com
|
|
Fix spelling typo in comments.
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: pengfuyuan <pengfuyuan@kylinos.cn>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220426121639.39160-1-pengfuyuan@kylinos.cn
|
|
Fix multiple warnings produced by make htmldocs
Fixes: cb269e0aba7c ("s390/vfio-ap: update docs to include dynamic config support")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Fix multiple warnings produced by make htmldocs
Fixes: e32d3827f3d5 ("s390/Docs: new doc describing lock usage by the vfio_ap device driver")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
This patch adds missing includes to headers under include/net.
All these problems are currently masked by the existing users
including the missing dependency before the broken header.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bitmap are "unsigned long", so use it instead of a "u32" to make things
more explicit.
While at it, remove some useless cast (and leading spaces) when using the
bitmap API.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Edward Cree says:
====================
sfc: VF representors for EF100
This series adds representor netdevices for EF100 VFs, as a step towards
supporting TC offload and vDPA usecases in future patches.
In this first series is basic netdevice creation and packet TX; the
following series will add the RX path.
v3: dropped massive mcdi_pcol.h patch which was applied separately.
v2: converted comments on struct efx_nic members added in patch #4 to
kernel-doc (Jakub). While at it, also gave struct efx_rep its own kdoc
since several members had comments on them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since representors piggy-back on the PF's queues for TX, they can
only accept new TXes while the PF is up. Thus, any operation which
detaches the PF must first detach all its VFreps.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement .ndo_start_xmit() by calling into the parent PF's TX path.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A non-null efv in __ef100_enqueue_skb() indicates that the packet is
from that representor, should be transmitted with a suitable option
descriptor (to instruct the switch to deliver it to the representee),
and should not be accounted to the parent PF's stats or BQL.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An MAE port, or m-port, is a port (source/destination for traffic) on
the Match-Action Engine (the internal switch on EF100).
Representors will use their representee's m-port for two purposes: as
a destination override on TX from the representor, and as a source
match in 'default rules' to steer representee traffic (when not
matched by e.g. a TC flower rule) to representor RX via the parent
PF's receive queue.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Requires storing VF index in struct efx_rep.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No net_device_ops yet, just a placeholder netdev created per VF.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
One PCIe function per network port (more precisely, per m-port group) is
responsible for configuring the Match-Action Engine which performs
switching and packet modification in the slice to support flower/OVS
offload. The GRP_MAE bit in the privilege mask indicates whether a
given function has this capability.
At probe time, call MCDIs to read the calling function's privilege mask,
and store the GRP_MAE bit in a new ef100_nic_data member.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ping sockets don't appear to make any attempt to preserve flow labels
created and set by userspace using IPV6_FLOWINFO_SEND. Instead they are
clobbered by autolabels (if enabled) or zero.
Grab the flowlabel out of the msghdr similar to how rawv6_sendmsg does
it and move the memset up so it doesn't get zeroed after.
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The phy-reset-* properties are missing type definitions and are not common
properties. Even though they are deprecated, a type is needed.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While the if/then schemas mostly work, there's a few issues. The 'allOf'
schema will also be true if 'fixed-link' is not an array or object as a
false 'if' schema (without an 'else') will be true. In the array case
doesn't set the type (uint32-array) in the 'then' clause. In the node case,
'additionalProperties' is missing.
Rework the schema to use oneOf with each possible type.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The open code which is netif_is_bridge_port() || netif_is_ovs_port() is
defined as a new helper function on netdev.h like netif_is_any_bridge_port
that can check both IFF flags in 1 go. So use netif_is_any_bridge_port()
function instead of open code. This patch doesn't change logic.
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The open code which is netif_is_bridge_port() || netif_is_ovs_port() is
defined as a new helper function on netdev.h like netif_is_any_bridge_port
that can check both IFF flags in 1 go. So use netif_is_any_bridge_port()
function instead of open code. This patch doesn't change logic.
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
Fix sparse warnings in various fsl drivers.
|
Avraham Stern
Johannes Berg
Arnd Bergmann
Carsten Haitzler
Robin Murphy
pengfuyuan
Alexander Gordeev
Jakub Kicinski
Christophe JAILLET
David S. Miller
Edward Cree
Alan Brady
Rob Herring
Juhee Kang
Mark Brown