aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-07-07scsi: zfcp: Declare zfcp_sdev_attrs as staticJulian Wiedmann1-1/+1
These attributes are now only accessed through the zfcp_sysfs_sdev_attr_group. Link: https://lore.kernel.org/r/0791b9149ebfa39e6b8eab093113cd2527dbf3d3.1657122360.git.bblock@linux.ibm.com Fixes: d8d7cf3f7d07 ("scsi: zfcp: Switch to attribute groups") Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: ufs: Skip last hci reset to get valid register valuesJunwoo Lee1-1/+1
Once the host link startup fails 3 times, all host registers are reset to default values except in ufshcd_hba_enable(). The ufs host controller is disabled and enabled in ufshcd_hba_enable(). Consequently we need to skip last hci reset to get valid host register values. e.g. [ 1.898026] [2: kworker/u16:2: 211] ufs: link startup failed 1 [ 1.898133] [2: kworker/u16:2: 211] host_regs: 00000000: 1383ff1f 00000000 00000300 00000000 [ 1.898141] [2: kworker/u16:2: 211] host_regs: 00000010: 00000106 000001ce 00000000 00000000 [ 1.898148] [2: kworker/u16:2: 211] host_regs: 00000020: 00000000 00000470 00000000 00000000 [ 1.898155] [2: kworker/u16:2: 211] host_regs: 00000030: 00000008 00000003 00000000 00000000 [ 1.898163] [2: kworker/u16:2: 211] host_regs: 00000040: 00000000 00000000 00000000 00000000 [ 1.898171] [2: kworker/u16:2: 211] host_regs: 00000050: 00000000 00000000 00000000 00000000 [ 1.898177] [2: kworker/u16:2: 211] host_regs: 00000060: 00000000 00000000 00000000 00000000 [ 1.898186] [2: kworker/u16:2: 211] host_regs: 00000070: 00000000 00000000 00000000 00000000 [ 1.898194] [2: kworker/u16:2: 211] host_regs: 00000080: 00000000 00000000 00000000 00000000 [ 1.898201] [2: kworker/u16:2: 211] host_regs: 00000090: 00000000 00000000 00000000 00000000 Link: https://lore.kernel.org/r/20220705083538.15143-1-sh043.lee@samsung.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Junwoo Lee <junwoo80.lee@samsung.com> Signed-off-by: Seunghui Lee <sh043.lee@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: ufs: ufs-pci: Enable WriteBooster capability on ADLDaniil Lunev1-0/+1
Sets the WriteBooster capability flag when ADL's UFS controller is used. Link: https://lore.kernel.org/r/20220705165316.v2.1.Ib5ebec952d9a59f5c69c89b694777f517d22466d@changeid Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Daniil Lunev <dlunev@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: lpfc: Copyright updates for 14.2.0.5 patchesJames Smart3-3/+3
Update copyrights to 2022 for files modified in the 14.2.0.5 patch set. Link: https://lore.kernel.org/r/20220701211425.2708-13-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: lpfc: Update lpfc version to 14.2.0.5James Smart1-1/+1
Update lpfc version to 14.2.0.5 Link: https://lore.kernel.org/r/20220701211425.2708-12-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: lpfc: Remove Menlo/Hornet related codeJames Smart11-465/+7
The Menlo/Hornet adapter was never released to the field. As such, driver code specific to the adapter is unnecessary and should be removed. Link: https://lore.kernel.org/r/20220701211425.2708-11-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: lpfc: Refactor lpfc_nvmet_prep_abort_wqe() into lpfc_sli_prep_abort_xri()James Smart5-52/+18
lpfc_nvmet_prep_abort_wqe() has a lot of common code with lpfc_sli_prep_abort_xri(). Delete lpfc_nvmet_prep_abort_wqe() as the wqe can be filled out using the generic lpfc_sli_prep_abort_xri routine(). Add the wqec option to lpfc_sli_prep_abort_xri() for lpfc_nvmet_prep_abort_wqe(). Link: https://lore.kernel.org/r/20220701211425.2708-10-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: lpfc: Revert RSCN_MEMENTO workaround for misbehaved configurationJames Smart3-9/+3
The RSCN_MEMENTO logic was to workaround a target that does not register both FCP and NVMe FC4 types at the same time. This caused the configuration to not produce a second RSCN for the NVMe FC4 type registration in a timely manner. The intention of the RSCN_MEMENTO flag was to always signal to try NVMe PRLI. However, there are other FCP-only target arrays in correctly behaved configurations that reject the NVMe PRLI followed by a LOGO leading to never rediscovering the target after an issue_lip (as LOGO causes a repeat of PLOGI/PRLIs). Revert the RSCN_MEMENTO patch as it is causing correctly behaved configs to fail while it exists only to succeed on a misbehaved config. Link: https://lore.kernel.org/r/20220701211425.2708-9-jsmart2021@gmail.com Fixes: 1045592fc968 ("scsi: lpfc: Introduce FC_RSCN_MEMENTO flag for tracking post RSCN completion") Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: lpfc: Fix lost NVMe paths during LIF bounce stress testJames Smart1-7/+8
During a target link bounce test, the driver sees a mismatch between the NPortId and the WWPN on the node structures (ndlps) involved. When this occurs, the driver "swaps" the ndlp and new_ndlp node parameters to restore WWPN/DID uniqueness in the fc_nodes list per vport. However, the driver neglected to swap the nlp_fc4_type in the ndlp passed to lpfc_plogi_confirm_nport causing a failure to recover the NVMe PLOGI/PRLI and ultimately the NVMe paths. Correct confirm_nport to preserve the fc4 types from the new-ndlp when the data is moved over ot the ndlp structure. Link: https://lore.kernel.org/r/20220701211425.2708-8-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: lpfc: Fix attempted FA-PWWN usage after feature disableJames Smart2-2/+11
Disabling FA-PWWN should be effective after port reset, but in some cases it was found to be impossible to clear FA-PWWN usage without a driver reload. Clean up FA-PWWN flag management to make enable and disable of the feature more robust. Link: https://lore.kernel.org/r/20220701211425.2708-7-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: lpfc: Fix possible memory leak when failing to issue CMF WQEJames Smart1-1/+3
There is no corresponding free routine if lpfc_sli4_issue_wqe fails to issue the CMF WQE in lpfc_issue_cmf_sync_wqe. If ret_val is non-zero, then free the iocbq request structure. Link: https://lore.kernel.org/r/20220701211425.2708-6-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: lpfc: Remove extra atomic_inc on cmd_pending in queuecommand after VMIDJames Smart1-1/+0
VMID introduced an extra increment of cmd_pending, causing double-counting of the I/O. The normal increment ios performed in lpfc_get_scsi_buf. Link: https://lore.kernel.org/r/20220701211425.2708-5-jsmart2021@gmail.com Fixes: 33c79741deaf ("scsi: lpfc: vmid: Introduce VMID in I/O path") Cc: <stable@vger.kernel.org> # v5.14+ Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: lpfc: Set PU field when providing D_ID in XMIT_ELS_RSP64_CX iocbJames Smart1-0/+1
When providing a D_ID in XMIT_ELS_RSP64_CX iocb the PU field should be set to 3 to describe the parameter being passed to firmware. Link: https://lore.kernel.org/r/20220701211425.2708-4-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: lpfc: Prevent buffer overflow crashes in debugfs with malformed user inputJames Smart1-10/+10
Malformed user input to debugfs results in buffer overflow crashes. Adapt input string lengths to fit within internal buffers, leaving space for NULL terminators. Link: https://lore.kernel.org/r/20220701211425.2708-3-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: lpfc: Fix uninitialized cqe field in lpfc_nvme_cancel_iocb()James Smart1-0/+1
In lpfc_nvme_cancel_iocb(), a cqe is created locally from stack storage. The code didn't initialize the total_data_placed word, inheriting stack content. Initialize the total_data_placed word. Link: https://lore.kernel.org/r/20220701211425.2708-2-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07Merge branch '5.19/scsi-fixes' into 5.20/scsi-stagingMartin K. Petersen22-116/+262
Bring in fixes to resolve a merge conflict in the lpfc driver update. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07dt-bindings: i2c: i2c-rk3x: add rk3588 compatibleSebastian Reichel1-0/+1
Just like RK356x, RK3588 is compatible to the existing rk3399 binding. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-07scsi: sd: Rework asynchronous resume supportBart Van Assche2-18/+71
For some technologies, e.g. an ATA bus, resuming can take multiple seconds. Waiting for resume to finish can cause a very noticeable delay. Hence this commit that restores the behavior from before "scsi: core: pm: Rely on the device driver core for async power management" for most SCSI devices. This commit introduces a behavior change: if the START command fails, do not consider this as a SCSI disk resume failure. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215880 Link: https://lore.kernel.org/r/20220630195703.10155-3-bvanassche@acm.org Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management") Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: John Garry <john.garry@huawei.com> Cc: ericspero@icloud.com Cc: jason600.groome@gmail.com Tested-by: jason600.groome@gmail.com Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: core: Move the definition of SCSI_QUEUE_DELAYBart Van Assche1-7/+7
Move the definition of SCSI_QUEUE_DELAY to just above the function that uses it. Link: https://lore.kernel.org/r/20220630195703.10155-2-bvanassche@acm.org Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: John Garry <john.garry@huawei.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07i2c: cadence: Unregister the clk notifier in error pathSatish Nagireddy1-0/+1
This patch ensures that the clock notifier is unregistered when driver probe is returning error. Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller") Signed-off-by: Satish Nagireddy <satish.nagireddy@getcruise.com> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-07Merge branches 'v5.20/vfio/spapr_tce-unused-arg-v1', 'v5.20/vfio/comment-typo-v1' and 'v5.20/vfio/vfio-ccw-rework-v4' into v5.20/vfio/nextAlex Williamson7-126/+126
2022-07-07scsi: megaraid_sas: Clean up some inconsistent indentingJiapeng Chong1-2/+2
This was found by coccicheck: drivers/scsi/megaraid/megaraid_sas_base.c:3950 process_fw_state_change_wq() warn: inconsistent indenting. Link: https://lore.kernel.org/r/20220630074152.29171-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: gvp11: Convert m68k WD33C93 drivers to DMA APIMichael Schmitz1-18/+77
Use dma_map_single() for gvp11 driver (leave bounce buffer logic unchanged). Use dma_set_mask_and_coherent() to avoid explicit cache flushes. Compile-tested only. CC: linux-scsi@vger.kernel.org Link: https://lore.kernel.org/r/6d1d88ee-1cf6-c735-1e6d-bafd2096e322@gmail.com Link: https://lore.kernel.org/r/20220630033302.3183-4-schmitzmic@gmail.com Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> -- Changes from v1: Arnd Bergmann: - reorder bounce buffer copy and dma mapping
2022-07-07scsi: a2091: Convert m68k WD33C93 drivers to DMA APIMichael Schmitz1-15/+48
Use dma_map_single() for a2091 driver (leave bounce buffer logic unchanged). Use dma_set_mask_and_coherent() to avoid explicit cache flushes. Compile-tested only. CC: linux-scsi@vger.kernel.org Link: https://lore.kernel.org/r/6d1d88ee-1cf6-c735-1e6d-bafd2096e322@gmail.com Link: https://lore.kernel.org/r/20220630033302.3183-3-schmitzmic@gmail.com Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> -- Changes from v1: Arnd Bergmann: - reorder mapping and bounce buffer copy
2022-07-07scsi: a3000: Convert m68k WD33C93 drivers to DMA APIMichael Schmitz1-9/+44
Use dma_map_single() for a3000 driver (leave bounce buffer logic unchanged). Use dma_set_mask_and_coherent() to avoid explicit cache flushes. Compile-tested only. CC: linux-scsi@vger.kernel.org Link: https://lore.kernel.org/r/6d1d88ee-1cf6-c735-1e6d-bafd2096e322@gmail.com Link: https://lore.kernel.org/r/20220630033302.3183-2-schmitzmic@gmail.com Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> -- Changes from v1: - restore bounce buffer allocation (dropped in v1) Arnd Bergmann: - reorder dma mapping and bounce buffer copy
2022-07-07scsi: core: Shorten long warning messagesLi Zhijian1-3/+1
sdev_printk() will only accept messages up to 128 bytes. Shorten strings exceeding 128 bytes avoid printing an incomplete sentence like: [ 475.156955] sd 9:0:0:0: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatical Link: https://lore.kernel.org/r/20220630024516.1571209-1-lizhijian@fujitsu.com Suggested-by: Finn Thain <fthain@linux-m68k.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07i2c: add support for microchip fpga i2c controllersConor Dooley3-0/+492
Add Microchip CoreI2C i2c controller support. This driver supports the "hard" i2c controller on the Microchip PolarFire SoC & the basic feature set for "soft" i2c controller implemtations in the FPGA fabric. Co-developed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-07scsi: target: Detect UNMAP support post configurationMike Christie1-8/+19
On our backend we can do something similar to LIO where we can enable and disable UNMAP support on the fly. In the SCSI/block layer we can detect this by just doing a rescan. However, LIO cannot detect this change because we only check during the initial configuration. This patch allows UNMAP detection to also happen when the user tries to turn it on. Link: https://lore.kernel.org/r/20220628200230.15052-6-michael.christie@oracle.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: target: Add file configure_unmap calloutMike Christie1-14/+19
Move file's UNMAP setup code to a configure_unmap callout. Link: https://lore.kernel.org/r/20220628200230.15052-5-michael.christie@oracle.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: target: Add iblock configure_unmap calloutMike Christie1-4/+9
Move iblock's UNMAP setup code to a configure_unmap callout. Link: https://lore.kernel.org/r/20220628200230.15052-4-michael.christie@oracle.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: target: Add callout to configure UNMAP settingsMike Christie2-0/+7
Add a callout to configure a backend's UNMAP settings. This will be used to allow userspace to configure UNMAP after the initial device setup, similar to how we can set up the other attributes post device configuration. Link: https://lore.kernel.org/r/20220628200230.15052-3-michael.christie@oracle.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: target: Remove incorrect zero blocks WRITE_SAME checkMike Christie1-4/+0
We use WSNZ=1 so if we get a WRITE_SAME with zero logical blocks we are supposed to fail it. We do this check and failure in target_core_sbc.c before calling into the backend, so we can remove the incorrect check in target_core_file. Link: https://lore.kernel.org/r/20220628200230.15052-2-michael.christie@oracle.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: mpi3mr: Increase cmd_per_lun to 128Sreekanth Reddy1-1/+1
Increase cmd_per_lun to 128. Link: https://lore.kernel.org/r/20220628074848.5036-3-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: mpi3mr: Enable shared host tagsetSreekanth Reddy1-0/+2
Enable shared host tagset to make sure that total outstanding I/O count can not exceed controller's can_queue setting. Link: https://lore.kernel.org/r/20220628074848.5036-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: target: Fix WRITE_SAME No Data Buffer crashMike Christie3-0/+13
In newer version of the SBC specs, we have a NDOB bit that indicates there is no data buffer that gets written out. If this bit is set using commands like "sg_write_same --ndob" we will crash in target_core_iblock/file's execute_write_same handlers when we go to access the se_cmd->t_data_sg because its NULL. This patch adds a check for the NDOB bit in the common WRITE SAME code because we don't support it. And, it adds a check for zero SG elements in each handler in case the initiator tries to send a normal WRITE SAME with no data buffer. Link: https://lore.kernel.org/r/20220628022325.14627-2-michael.christie@oracle.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07vfio/ccw: Move FSM open/close to MDEV open/closeEric Farman3-32/+39
Part of the confusion that has existed is the FSM lifecycle of subchannels between the common CSS driver and the vfio-ccw driver. During configuration, the FSM state goes from NOT_OPER to STANDBY to IDLE, but then back to NOT_OPER. For example: vfio_ccw_sch_probe: VFIO_CCW_STATE_NOT_OPER vfio_ccw_sch_probe: VFIO_CCW_STATE_STANDBY vfio_ccw_mdev_probe: VFIO_CCW_STATE_IDLE vfio_ccw_mdev_remove: VFIO_CCW_STATE_NOT_OPER vfio_ccw_sch_remove: VFIO_CCW_STATE_NOT_OPER vfio_ccw_sch_shutdown: VFIO_CCW_STATE_NOT_OPER Rearrange the open/close events to align with the mdev open/close, to better manage the memory and state of the devices as time progresses. Specifically, make mdev_open() perform the FSM open, and mdev_close() perform the FSM close instead of reset (which is both close and open). This makes the NOT_OPER state a dead-end path, indicating the device is probably not recoverable without fully probing and re-configuring the device. This has the nice side-effect of removing a number of special-cases where the FSM state is managed outside of the FSM itself (such as the aforementioned mdev_close() routine). Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220707135737.720765-12-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-07-07vfio/ccw: Refactor vfio_ccw_mdev_resetEric Farman1-14/+10
Use both the FSM Close and Open events when resetting an mdev, rather than making a separate call to cio_enable_subchannel(). Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220707135737.720765-11-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-07-07vfio/ccw: Create a CLOSE FSM eventEric Farman4-24/+34
Refactor the vfio_ccw_sch_quiesce() routine to extract the bit that disables the subchannel and affects the FSM state. Use this to form the basis of a CLOSE event that will mirror the OPEN event, and move the subchannel back to NOT_OPER state. A key difference with that mirroring is that while OPEN handles the transition from NOT_OPER => STANDBY, the later probing of the mdev handles the transition from STANDBY => IDLE. On the other hand, the CLOSE event will move from one of the operating states {IDLE, CP_PROCESSING, CP_PENDING} => NOT_OPER. That is, there is no stop in a STANDBY state on the deconfigure path. Add a call to cp_free() in this event, such that it is captured for the various permutations of this event. In the unlikely event that cio_disable_subchannel() returns -EBUSY, the remaining logic of vfio_ccw_sch_quiesce() can still be used. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220707135737.720765-10-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-07-07vfio/ccw: Create an OPEN FSM EventEric Farman3-7/+24
Move the process of enabling a subchannel for use by vfio-ccw into the FSM, such that it can manage the sequence of lifecycle events for the device. That is, if the FSM state is NOT_OPER(erational), then do the work that would enable the subchannel and move the FSM to STANDBY state. An attempt to perform this event again from any of the other operating states (IDLE, CP_PROCESSING, CP_PENDING) will convert the device back to NOT_OPER so the configuration process can be started again. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220707135737.720765-9-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-07-07vfio/ccw: Update trace data for not operational eventEric Farman1-2/+6
We currently cut a very basic trace whenever the FSM directs control to the not operational routine. Convert this to a message, so it's alongside the other configuration related traces (create, remove, etc.), and record both the event that brought us here and the current state of the device. This will provide some better footprints if things go bad. Suggested-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220707135737.720765-8-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-07-07vfio/ccw: Flatten MDEV device (un)registerEric Farman3-15/+2
The vfio_ccw_mdev_(un)reg routines are merely vfio-ccw routines that pass control to mdev_(un)register_device. Since there's only one caller of each, let's just call the mdev routines directly. Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220707135737.720765-7-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-07-07vfio/ccw: Pass enum to FSM event jumptableEric Farman1-1/+1
The FSM has an enumerated list of events defined. Use that as the argument passed to the jump table, instead of a regular int. Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220707135737.720765-6-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-07-07vfio/ccw: Remove private->mdevEric Farman3-6/+0
There are no remaining users of private->mdev. Remove it. Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20220707135737.720765-5-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-07-07vfio/ccw: Do not change FSM state in subchannel eventEric Farman1-11/+3
The routine vfio_ccw_sch_event() is tasked with handling subchannel events, specifically machine checks, on behalf of vfio-ccw. It correctly calls cio_update_schib(), and if that fails (meaning the subchannel is gone) it makes an FSM event call to mark the subchannel Not Operational. If that worked, however, then it decides that if the FSM state was already Not Operational (implying the subchannel just came back), then it should simply change the FSM to partially- or fully-open. Remove this trickery, since a subchannel returning will require more probing than simply "oh all is well again" to ensure it works correctly. Fixes: bbe37e4cb8970 ("vfio: ccw: introduce a finite state machine") Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220707135737.720765-4-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-07-07vfio/ccw: Fix FSM state if mdev probe failsEric Farman2-3/+4
The FSM is in STANDBY state when arriving in vfio_ccw_mdev_probe(), and this routine converts it to IDLE as part of its processing. The error exit sets it to IDLE (again) but clears the private->mdev pointer. The FSM should of course be managing the state itself, but the correct thing for vfio_ccw_mdev_probe() to do would be to put the state back the way it found it. The corresponding check of private->mdev in vfio_ccw_sch_io_todo() can be removed, since the distinction is unnecessary at this point. Fixes: 3bf1311f351ef ("vfio/ccw: Convert to use vfio_register_emulated_iommu_dev()") Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220707135737.720765-3-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-07-07vfio/ccw: Remove UUID from s390 debug logMichael Kawano4-26/+18
As vfio-ccw devices are created/destroyed, the uuid of the associated mdevs that are recorded in $S390DBF/vfio_ccw_msg/sprintf get lost. This is because a pointer to the UUID is stored instead of the UUID itself, and that memory may have been repurposed if/when the logs are examined. The result is usually garbage UUID data in the logs, though there is an outside chance of an oops happening here. Simply remove the UUID from the traces, as the subchannel number will provide useful configuration information for problem determination, and is stored directly into the log instead of a pointer. As we were the only consumer of mdev_uuid(), remove that too. Cc: Kirti Wankhede <kwankhede@nvidia.com> Signed-off-by: Michael Kawano <mkawano@linux.ibm.com> Fixes: 60e05d1cf0875 ("vfio-ccw: add some logging") Fixes: b7701dfbf9832 ("vfio-ccw: Register a chp_event callback for vfio-ccw") [farman: reworded commit message, added Fixes: tags] Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Link: https://lore.kernel.org/r/20220707135737.720765-2-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-07-07drm/nouveau/nouveau_bo: fix potential memory leak in nouveau_bo_alloc()Jianglei Nie1-1/+3
nouveau_bo_alloc() allocates a memory chunk for "nvbo" with kzalloc(). When some error occurs, "nvbo" should be released. But when WARN_ON(pi < 0)) equals true, the function return ERR_PTR without releasing the "nvbo", which will lead to a memory leak. We should release the "nvbo" with kfree() if WARN_ON(pi < 0)) equals true. Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220705094306.2244103-1-niejianglei2021@163.com
2022-07-07drm/amd/display: clean up some inconsistent indentingYang Li1-8/+8
Eliminate the follow smatch warnings: drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:405 get_bios_object_from_path_v3() warn: inconsistent indenting drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:611 bios_parser_get_hpd_info() warn: inconsistent indenting drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:818 bios_parser_get_device_tag() warn: inconsistent indenting drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:1599 bios_parser_is_device_id_supported() warn: inconsistent indenting Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-07drm/amd/display: fix non-x86/PPC64 compilationAlex Deucher2-1/+2
Need to protect FP DMCUB code with CONFIG_DRM_AMD_DC_DCN. Fixes build failures like the following on arm64: ERROR: modpost: "__floatunsidf" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! ERROR: modpost: "__divdf3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! ERROR: modpost: "fma" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! ERROR: modpost: "__adddf3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! ERROR: modpost: "__fixdfsi" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! ERROR: modpost: "__muldf3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! ERROR: modpost: "__floatsidf" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! ERROR: modpost: "__fixunsdfsi" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! Fixes: 85f4bc0c333c ("drm/amd/display: Add SubVP required code") Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-07drm/amd/display: Fix new dmub notification enabling in DMStylon Wang1-8/+19
[Why] Changes from "Fix for dmub outbox notification enable" need to land in DM or DMUB outbox notification would be disabled. [How] Enable outbox notification only after interrupt are enabled and IRQ handlers registered. Any pending notification will be sent by DMUB once outbox notification is enabled. Fixes: ed7208706448 ("drm/amd/display: Fix for dmub outbox notification enable") Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.