aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-07-05pinctrl: renesas: r8a779g0: Remove unused MOD_SELx definitionsKuninori Morimoto1-54/+18
Current R-Car V4H PFC code has many MOD_SELx definitions with all 0. But these have no meaning. This patch removes them. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/875ykhtxym.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: r8a779g0: Remove unused IPxSRx definitionsKuninori Morimoto1-45/+22
Current R-Car V4H PFC code has many IPxSRx definitions with all 0. But these have no meaning. This patch removes them. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/877d4xtxyv.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: r8a779g0: Remove unused NOGP definitionsKuninori Morimoto1-17/+0
Current R-Car V4H PFC code has many NOGP definitions. But these are not used, and they are different from original usage. This patch removes them. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/878rpdtxz8.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: r8a779g0: Fixup MODSEL8Kuninori Morimoto1-12/+12
MODSEL8 controls I2C vs. GPIO modes, and the Datasheet (Rev.0.51) is indicating that I2C needs 1. But we should use 0 for all cases in reality. New Datasheet should be updated. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87a69ttxzg.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: r8a779g0: Add pins, groups and functionsPhong Hoang1-0/+1618
This patch adds SCIF, I2C, EthernetAVB, HSCIF, MMC, QSPI, MSIOF, PWM, CAN-FD, Ethernet-TSN, PCIe pins, groups, and functions. This patch was created based on the Rev.0.51 datasheet. Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com> Signed-off-by: CongDang <cong.dang.xn@renesas.com> Signed-off-by: Kazuya Mizuguch <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Tho Vu <tho.vu.wh@renesas.com> [Morimoto: merged above patches into one, cleanup white space, sort modules alphabetically, fixup comments] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87bku9ty0b.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC supportLUU HOAI5-0/+2479
This patch adds initial pinctrl support for the R-Car V4H (R8A779G0) SoC, including bias, drive strength and voltage control. This patch was created based on the Rev.0.51 datasheet. Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [Morimoto: merge Kihara-san's MODSEL8 fixup patch, cleanup white space, care about reserved bits on each configs, fixup comments, etc.] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87czepty0j.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: Add PORT_GP_CFG_13 macrosKuninori Morimoto1-2/+6
Add PORT_GP_CFG_13() and PORT_GP_13() helper macros, to be used by the r8a779g0 subdriver. Based on a larger patch in the BSP by LUU HOAI. Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87edz5ty0r.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05dt-bindings: pinctrl: renesas,pfc: Document r8a779g0 supportKuninori Morimoto1-0/+1
Document Pin Function Controller (PFC) support for the Renesas R-Car V4H (R8A779G0) SoC. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87fsjlty13.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: Add RZ/V2M pin and gpio controller driverPhil Edworthy3-0/+1133
Add support for pin and gpio controller driver for RZ/V2M SoC. Based on the RZ/G2L driver. Note that the DETDO and DETMS dedicated pins are currently not documented in the HW manual as to which pin group they are in. HW team has since said that the output level of 1.8V I/O group 4 (for MD0-7, and debugger) is the same as the 1.8V I/O group 3. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220624084833.22605-3-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05phy: qcom-qmp: clean up hex definesJohan Hovold1-8/+8
Use lower case hex consistently for define values. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220609120338.4080-4-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: qcom-qmp: clean up define alignmentJohan Hovold1-24/+24
Clean up the QMP defines by removing some stray white space and making sure values are aligned. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220609120338.4080-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: qcom-qmp: clean up v4 and v5 define orderJohan Hovold1-3/+3
Clean up the QMP v4 and v5 defines by moving a few entries that were out of order. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220609120338.4080-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05arm64: dts: renesas: spider-cpu: Fix scif0/scif3 sort orderGeert Uytterhoeven1-9/+9
The scif0 nodes were accidentally inserted after the scif3 nodes, breaking alphabetical sort order. Fixes: 1614c8624a48b9c9 ("arm64: dts: renesas: spider-cpu: Enable SCIF0 on second connector") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/2fe0e782351c202ed009dcd658f4bceec8f3a56d.1656951240.git.geert+renesas@glider.be
2022-07-05ARM: shmobile: rcar-gen2: Increase refcount for new referenceLiang He1-1/+4
In rcar_gen2_regulator_quirk(), for_each_matching_node_and_match() will automatically increase and decrease the refcount. However, we should call of_node_get() for the new reference created in 'quirk->np'. Besides, we also should call of_node_put() before the 'quirk' being freed. Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220701121804.234223-1-windhl@126.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05phy: qcom-qmp-usb: clean up pipe clock handlingJohan Hovold1-13/+2
Clean up the pipe clock handling by using dev_err_probe() to handle probe deferral and dropping the obsolete comment that claimed that the pipe clock was optional for some other PHY types. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220623113314.29761-4-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: qcom-qmp-pcie-msm8996: drop obsolete pipe clock type checkJohan Hovold1-17/+2
Drop the obsolete pipe clock handling which was used to treat the pipe clock as optional for types other than PCIe and USB and which is no longer needed since splitting the PHY driver. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220623113314.29761-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: qcom-qmp-pcie: drop obsolete pipe clock type checkJohan Hovold1-17/+2
Drop the obsolete pipe clock handling which was used to treat the pipe clock as optional for types other than PCIe and USB and which is no longer needed since splitting the PHY driver. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220623113314.29761-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: phy-mtk-dp: Add driver for DP phyMarkus Schneider-Pargmann4-0/+212
This is a new driver that supports the integrated DisplayPort phy for mediatek SoCs, especially the mt8195. The phy is integrated into the DisplayPort controller and will be created by the mtk-dp driver. This driver expects a struct regmap to be able to work on the same registers as the DisplayPort controller. It sets the device data to be the struct phy so that the DisplayPort controller can easily work with it. The driver does not have any devicetree bindings because the datasheet does not list the controller and the phy as distinct units. The interaction with the controller can be covered by the configure callback of the phy framework and its displayport parameters. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> [Bo-Chen: Modify reviewers' comments.] Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220624062725.4095-1-rex-bc.chen@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: cdns-dphy: Add support for DPHY TX on J721eRahul T R1-0/+61
Add support new compatible for dphy-tx on j721e and implement dphy ops required. Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220623125433.18467-4-r-ravikumar@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: cdns-dphy: Add band config for dphy txRahul T R1-1/+39
Add support for band ctrl config for dphy tx. Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220623125433.18467-3-r-ravikumar@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: dt-bindings: cdns,dphy: Add compatible for dphy on j721eRahul T R1-2/+3
Add compatible to support dphy tx on j721e Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220623125433.18467-2-r-ravikumar@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: rockchip-inno-usb2: Prevent incorrect error on probePeter Geis1-1/+1
If a phy supply is designated but isn't available at probe time, an EPROBE_DEFER is returned. Use dev_err_probe to prevent this from incorrectly printing during boot. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20220625212711.558495-1-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: dphy: drop unexpected word "the" in the commentsJiang Jian1-1/+1
there is an unexpected word "the" in the comments that need to be dropped file: ./drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c line: 139 * when in RxULPS check state, after the the logic enable the analog, changed to * when in RxULPS check state, after the logic enable the analog, Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220621120015.113682-1-jiangjian@cdjrlc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: tegra: Add PCIe PIPE2UPHY support for Tegra234Vidya Sagar1-1/+47
Synopsys DesignWare core based PCIe controllers in Tegra234 SoC interface with Universal PHY (UPHY) module through a PIPE2UPHY (P2U) module. For each PCIe lane of a controller, there is a P2U unit instantiated at hardware level. This driver provides support for the programming required for each P2U that is going to be used for a PCIe controller. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Link: https://lore.kernel.org/r/20220629060435.25297-9-vidyas@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05dt-bindings: PHY: P2U: Add support for Tegra234 P2U blockVidya Sagar1-4/+13
Add support for Tegra234 P2U (PIPE to UPHY) module block which is a glue module instantiated once for each PCIe lane between Synopsys DesignWare core based PCIe IP and Universal PHY block. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220629060435.25297-2-vidyas@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: mediatek: Add PCIe PHY driverJianjun Wang3-0/+279
Add PCIe GEN3 PHY driver support on MediaTek chipsets. Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: AngeloGioachino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220617070246.20142-3-jianjun.wang@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05dt-bindings: phy: mediatek: Add YAML schema for PCIe PHYJianjun Wang1-0/+75
Add YAML schema documentation for PCIe PHY on MediaTek chipsets. Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220617070246.20142-2-jianjun.wang@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: ti: tusb1210: Don't check for write errors when powering onAndy Shevchenko1-2/+3
On some platforms, like Intel Merrifield, the writing values during power on may timeout: tusb1210 dwc3.0.auto.ulpi: error -110 writing val 0x41 to reg 0x80 phy phy-dwc3.0.auto.ulpi.0: phy poweron failed --> -110 dwc3 dwc3.0.auto: error -ETIMEDOUT: failed to initialize core dwc3: probe of dwc3.0.auto failed with error -110 which effectively fails the probe of the USB controller. Drop the check as it was before the culprit commit (see Fixes tag). Fixes: 09a3512681b3 ("phy: ti: tusb1210: Improve ulpi_read()/_write() error checking") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Ferry Toth <fntoth@gmail.com> Link: https://lore.kernel.org/r/20220613160848.82746-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-04Merge tag 'linux-can-fixes-for-5.19-20220704' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-canJakub Kicinski12-216/+304
Marc Kleine-Budde says: ==================== can 2022-07-04 The 1st patch is by Oliver Hartkopp, targets the BCM CAN protocol and converts a costly synchronize_rcu() to call_rcu() to fix a performance regression. Srinivas Neeli's patch for the xilinx_can driver drops the brp limit down to 1, as only the pre-production silicon have an issue with a brp of 1. The next patch is by Duy Nguyen and fixes the data transmission on R-Car V3U SoCs in the rcar_canfd driver. Rhett Aultman's patch fixes a DMA memory leak in the gs_usb driver. Liang He's patch removes an extra of_node_get() in the grcan driver. The next 2 patches are by me, target the m_can driver and fix the timestamp handling used for peripheral devices like the tcan4x5x. Jimmy Assarsson contributes 3 patches for the kvaser_usb driver and fixes CAN clock and bit timing related issues. The remaining 5 patches target the mcp251xfd driver. Thomas Kopp contributes 2 patches to improve the workaround for broken CRC when reading the TBC register. 3 patches by me add a missing hrtimer_cancel() during the ndo_stop() callback, and fix the reading of the Device ID register. * tag 'linux-can-fixes-for-5.19-20220704' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix endianness conversion can: mcp251xfd: mcp251xfd_register_get_dev_id(): use correct length to read dev_id can: mcp251xfd: mcp251xfd_stop(): add missing hrtimer_cancel() can: mcp251xfd: mcp251xfd_regmap_crc_read(): update workaround broken CRC on TBC register can: mcp251xfd: mcp251xfd_regmap_crc_read(): improve workaround handling for mcp2517fd can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_info can: m_can: m_can_{read_fifo,echo_tx_event}(): shift timestamp to full 32 bits can: m_can: m_can_chip_config(): actually enable internal timestamping can: grcan: grcan_probe(): remove extra of_node_get() can: gs_usb: gs_usb_open/close(): fix memory leak can: rcar_canfd: Fix data transmission failed on R-Car V3U Revert "can: xilinx_can: Limit CANFD brp to 2" can: bcm: use call_rcu() instead of costly synchronize_rcu() ==================== Link: https://lore.kernel.org/r/20220704122613.1551119-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-05Merge branches 'msm-next-lumag-core', 'msm-next-lumag-dpu', 'msm-next-lumag-dp', 'msm-next-lumag-dsi', 'msm-next-lumag-hdmi', 'msm-next-lumag-mdp5' and 'msm-next-lumag-mdp4' into msm-next-lumagDmitry Baryshkov58-1122/+1199
Changes in this merge: Core: - client utilization via fdinfo support - fix fence rollover issue DPU: - constification of HW catalog - support for using encoder as CRC source - WB support on sc7180 - WB resolution fixes - enable DSPP support for sc7280 DP: - dropped custom bulk clock implementation - made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable - fix link retraining on resolution change MDP5: - MSM8953 perf data HDMI: - YAML'ification of schema - dropped obsolete GPIO support - misc cleanups Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05drm/msm: Fix fence rollover issueRob Clark1-1/+10
And while we are at it, let's start the fence counter close to the rollover point so that if issues slip in, they are more obvious. Signed-off-by: Rob Clark <robdclark@chromium.org> Fixes: fde5de6cb461 ("drm/msm: move fence code to it's own file") Fixes: 5f3aee4ceb5b ("drm/msm: Handle fence rollover") Patchwork: https://patchwork.freedesktop.org/patch/489619/ Link: https://lore.kernel.org/r/20220615162435.3011793-1-robdclark@gmail.com [DB: fixed the conflict while applying the patch] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05drm/msm: Use div64_ul instead of do_divWan Jiabing1-1/+1
Fix following coccicheck warning: drivers/gpu/drm/msm/msm_gpu_devfreq.c:72:1-7: WARNING: do_div() does a 64-by-32 division, please consider using div64_ul instead. Use div64_ul instead of do_div to avoid a possible truncation. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Patchwork: https://patchwork.freedesktop.org/patch/483499/ Link: https://lore.kernel.org/r/20220426132126.686447-1-wanjiabing@vivo.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05drm/msm: Expose client engine utilization via fdinfoRob Clark4-3/+77
Similar to AMD commit 874442541133 ("drm/amdgpu: Add show_fdinfo() interface"), using the infrastructure added in previous patches, we add basic client info and GPU engine utilisation for msm. Example output: # cat /proc/`pgrep glmark2`/fdinfo/6 pos: 0 flags: 02400002 mnt_id: 21 ino: 162 drm-driver: msm drm-client-id: 7 drm-engine-gpu: 1734371319 ns drm-cycles-gpu: 1153645024 drm-maxfreq-gpu: 800000000 Hz See also: https://patchwork.freedesktop.org/patch/468505/ v2: Add dev-maxfreq-$engine and update drm-usage-stats.rst v3: spelling and compiler warning Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Patchwork: https://patchwork.freedesktop.org/patch/488906/ Link: https://lore.kernel.org/r/20220609174213.2265938-2-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05drm: Add DRM_GEM_FOPSRob Clark1-8/+18
The DEFINE_DRM_GEM_FOPS() helper is a bit limiting if a driver wants to provide additional file ops, like show_fdinfo(). v2: Split out DRM_GEM_FOPS instead of making DEFINE_DRM_GEM_FOPS varardic v3: nits Signed-off-by: Rob Clark <robdclark@chromium.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Patchwork: https://patchwork.freedesktop.org/patch/488904/ Link: https://lore.kernel.org/r/20220609174213.2265938-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05drm/msm: Make msm_gem_free_object() staticRob Clark2-2/+1
Misc small cleanup I noticed. Not called from another object file since commit 3c9edd9c85f5 ("drm/msm: Introduce GEM object funcs") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489362/ Link: https://lore.kernel.org/r/20220613204910.2651747-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04clk: qcom: gcc-msm8960: create tsens device if there are no child nodesDmitry Baryshkov1-1/+5
Currently gcc-msm8960 driver manually creates tsens platform device manually. It would be better to follow IPQ8064 approach, where tsens device is defined as gcc's child device in the device tree. If nothing else, it removes gcc's dependency on QFPROM, thus allowing clock controller to be probed earlier. Don't create it in case there are available child nodes (tsens) inside the gcc's device tree node. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521151437.1489111-4-dmitry.baryshkov@linaro.org
2022-07-04dt-bindings: clock: qcom,gcc-apq8064: split tsens to the child nodeDmitry Baryshkov1-10/+30
Split tsens properties to the child node of the gcc. This follows the lead of ipq8064 (which also uses a separate node for tsens) and makes device tree closer to other platforms, where tsens is a completely separate device. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521151437.1489111-3-dmitry.baryshkov@linaro.org
2022-07-04dt-bindings: clock: qcom,gcc-apq8064: move msm8960 compat from gcc-other.yamlDmitry Baryshkov2-5/+6
MSM8960 shares the design (and the driver) of the global clock controller with APQ8064. Move it from clock/qcom,gcc-other.yaml to clock/qcom,gcc-apq8064.yaml. As the example in gcc-other.yaml was using qcom,gcc-msm8960 compat string, change it to qcom,gcc-msm8974. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521151437.1489111-2-dmitry.baryshkov@linaro.org
2022-07-04arm64: dts: qcom: msm8996: Add interconnect supportYassine Oudjana1-0/+93
Add interconnect providers for the multiple NoCs available on the platform, and assign interconnects used by some blocks. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211021132329.234942-6-y.oudjana@protonmail.com
2022-07-05ARM: dts: imx6qdl-ts7970: Fix ngpio typo and countKris Bahnsen1-1/+1
Device-tree incorrectly used "ngpio" which caused the driver to fallback to 32 ngpios. This platform has 62 GPIO registers. Fixes: 9ff8e9fccef9 ("ARM: dts: TS-7970: add basic device tree") Signed-off-by: Kris Bahnsen <kris@embeddedTS.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-05arm64: dts: ls1028a: Update SFP node to include clockSean Anderson1-1/+4
The clocks property is now mandatory. Add it to avoid warning message. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Michael Walle <michael@walle.cc> Fixes: eba5bea8f37f ("arm64: dts: ls1028a: add efuse node") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-05arm64: dts: Add SFP node for TA 3.0 devicesSean Anderson3-0/+24
This adds an SFP node for Trust Architecture 3.0 devices. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-05arm64: dts: layerscape: Add SFP node for TA 2.1 devicesSean Anderson3-0/+24
This adds an appropriate SFP node for Trust Architecture 2.1 devices. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-05ARM: dts: layerscape: Add SFP node for TA 2.1 devicesSean Anderson1-0/+7
This adds an appropriate SFP node for Trust Architecture 2.1 devices. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-05soc: fsl: guts: check return value after calling of_iomap() in fsl_guts_get_soc_uid()Yang Yingliang1-0/+4
of_iomap() may return NULL, so we need check the return value. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-05soc: fsl: guts: fix return value check in fsl_guts_init()Yang Yingliang1-2/+2
In case of error, of_iomap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test and return -ENOMEM as error value. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-05ARM: dts: ux500: Drop unused i2c power domain supplyLinus Walleij1-5/+0
This regulator supply is replaced by the proper power domain. Reported-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220701225339.814962-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-07-04dt-bindings: display: sun4i: Fix D1 pipeline countSamuel Holland1-0/+1
When adding the bindings for the D1 display engine, I missed the condition for the number of pipelines. D1 has two mixers, so it will have two pipeline references. Fixes: ae5a5d26c15c ("dt-bindings: display: Add D1 display engine compatibles") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220702032921.22433-1-samuel@sholland.org
2022-07-04arm64: defconfig: Enable Allwinner built in CODECsMark Brown1-0/+3
Allwinner provide an audio CODEC as part of their SoCs which is used on a number of designs, enable the driver as part of defconfig in order to improve coverage of this in the various automated testing systems. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220701112213.1765599-1-broonie@kernel.org
2022-07-04arm64: dts: allwinner: a64: orangepi-win: Fix LED node nameSamuel Holland1-1/+1
"status" does not match any pattern in the gpio-leds binding. Rename the node to the preferred pattern. This fixes a `make dtbs_check` error. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220702132816.46456-1-samuel@sholland.org
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.