aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-06-27x86/cpufeatures: Move RETPOLINE flags to word 11Peter Zijlstra1-2/+6
In order to extend the RETPOLINE features to 4, move them to word 11 where there is still room. This mostly keeps DISABLE_RETPOLINE simple. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2022-06-27x86/kvm/vmx: Make noinstr cleanPeter Zijlstra3-6/+6
The recent mmio_stale_data fixes broke the noinstr constraints: vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0x15b: call to wrmsrl.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0x1bf: call to kvm_arch_has_assigned_device() leaves .noinstr.text section make it all happy again. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2022-06-27media: mediatek: vcodec: Report supported bitrate modesHirokazu Honda1-0/+11
The media driver supports constant bitrate mode only. The supported rate control mode is reported through querymenu() and s_ctrl() fails if non constant bitrate mode (e.g. VBR) is requested. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Irui Wang <irui.wang@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27media: av7110: Remove duplicate 'with' in two places.Jiang Jian1-1/+1
file: ./drivers/staging/media/av7110/av7110.c line: 2367 * reset with with MASK_31 to MC1 changed to * reset with MASK_31 to MC1 Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27media: saa7164: Remove duplicate 'on' in two places.Jiang Jian1-1/+1
file: drivers/media/pci/saa7164/saa7164-api.c line: 804 /* Assumption: Hauppauge eeprom is at 0xa0 on on bus 0 */ changed to /* Assumption: Hauppauge eeprom is at 0xa0 on bus 0 */ Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27media: mediatek: vcodec: Fix non subdev architecture open power failYunfei Dong1-0/+2
According to subdev_bitmap bit value to open hardware power, need to set subdev_bitmap value for non subdev architecture. Fixes: c05bada35f01 ("media: mtk-vcodec: Add to support multi hardware decode") Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27media: usb: gspca: aligned '*' each lineJiang Jian1-1/+1
Consider "*" alignment in comments Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27media: tw686x: Fix memory leak in tw686x_video_initMiaoqian Lin1-1/+3
video_device_alloc() allocates memory for vdev, when video_register_device() fails, it doesn't release the memory and leads to memory leak, call video_device_release() to fix this. Fixes: 704a84ccdbf1 ("[media] media: Support Intersil/Techwell TW686x-based video capture cards") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27media: driver/nxp/imx-jpeg: fix a unexpected return value problemJian Zhang1-0/+2
In function mxc_jpeg_probe(), when devm_clk_get() fail, the return value will be unexpected, and it should be the devm_clk_get's error code. Fixes: 4c2e5156d9fa6 ("media: imx-jpeg: Add pm-runtime support for imx-jpeg") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jian Zhang <zhangjian210@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27Merge branch 'for-v5.20/aspeed-dts-cleanup' into for-v5.20/dts-cleanupKrzysztof Kozlowski3-2/+3
2022-06-27ARM: dts: stih407-family: Harmonize DWC USB3 DT nodes nameSerge Semin1-1/+1
In accordance with the DWC USB3 bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly named. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Link: https://lore.kernel.org/r/20220624141622.7149-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-06-27media: MAINTAINERS: add Yunfei Dong as mediatek vcodec driver maintainerYunfei Dong1-0/+1
I have been working on mediatek driver development for a very long time, and sent many patches to change the driver architecture. Add myself as co-maintainer for mediatek vcodec driver. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27media: mediatek: vcodec: Skip SOURCE_CHANGE & EOS events for statelessChen-Yu Tsai1-0/+5
The stateless decoder API does not specify the usage of SOURCE_CHANGE and EOF events. These events are used by stateful decoders to signal changes in the bitstream. They do not make sense for stateless decoders. Do not handle subscription for these two types of events for stateless decoder instances. This fixes the last v4l2-compliance error: Control ioctls: fail: v4l2-test-controls.cpp(946): have_source_change || have_eos test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL Fixes: 8cdc3794b2e3 ("media: mtk-vcodec: vdec: support stateless API") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27soc: imx: imx8m-blk-ctrl: Make error prints usefulMarek Vasut1-3/+6
Print the name of the power domain which failed to make the error prints actually useful for finding the error. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Martyn Welch <martyn.welch@collabora.com> Cc: Paul Elder <paul.elder@ideasonboard.com> Cc: Shawn Guo <shawnguo@kernel.org> Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-27media: tw686x: Fix an error handling path in tw686x_probe()Christophe JAILLET1-1/+4
The commit in Fixes: is incomplete. It has moved some code in the probe but not all error handling paths have been updated. Now, if request_irq() fails, we must release some resources. Fixes: c8946454ed96 ("media: tw686x: Register the irq at the end of probe") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27media: stm32: dcmi: Drop always NULL sd_state from dcmi_pipeline_s_fmt()Marek Vasut1-3/+2
The second argument is always NULL, stop passing it to the function. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alain Volmat <alain.volmat@foss.st.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Amelie DELAUNAY <amelie.delaunay@foss.st.com> Cc: Hugues FRUCHET <hugues.fruchet@foss.st.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Philippe CORNU <philippe.cornu@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27arm64: dts: apm: Harmonize DWC USB3 DT nodes nameSerge Semin2-5/+5
In accordance with the DWC USB3 bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly named despite of the warning comment about possible backward compatibility issues. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20220624141622.7149-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-06-27media: stm32: dcmi: Fill in remaining Bayer formatsMarek Vasut1-0/+48
Fill in 10, 12, 14 bit Bayer formats into the DCMI driver. Those are useful e.g. when MT9P006 sensor is connected. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alain Volmat <alain.volmat@foss.st.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Amelie DELAUNAY <amelie.delaunay@foss.st.com> Cc: Hugues FRUCHET <hugues.fruchet@foss.st.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Philippe CORNU <philippe.cornu@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27drm/ast: Fix black screen when getting out of suspendJocelyn Falempe1-0/+13
With an AST2600, the screen is garbage when going out of suspend. This is because color settings are lost, and not restored on resume. Force the color settings on DPMS_ON, to make sure the settings are correct. I didn't write this code, it comes from the out-of-tree aspeed driver v1.13 https://www.aspeedtech.com/support_driver/ Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Venkat Tadikonda <venkateswara.rao@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220622124815.356035-1-jfalempe@redhat.com
2022-06-27media: mediatek: vcodec: Initialize decoder parameters after getting dec_capabilityYunfei Dong2-2/+2
Need to get dec_capability from scp first, then initialize decoder supported format and other parameters according to dec_capability value. Fixes: fd00d90330d1 ("media: mtk-vcodec: vdec: move stateful ops into their own file") Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27media: rkvdec:Remove redundant memsetZhang Zekun1-2/+0
As dma_alloc_coherent() will return a zeroed buffer, we don't need to memset the returned buffer. priv_tbl = dma_alloc_coherent() and count_tbl = dma_alloc_coherent() should be enough. -see commit 750afb08ca71 ("cross-tree: phase out dma_zalloc_coherent()") Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27media: atmel: atmel-isc-base: allow wb ctrls to be changed when isc is not configuredEugen Hristev1-4/+0
When attempting to change the white balance (WB) ctrls before starting streaming, e.g.: # v4l2-ctl -L User Controls .. blue_component_gain 0x009819c1 (int) : min=0 max=8191 step=1 default=512 value=512 flags=slider .. # v4l2-ctl --set-ctrl=blue_component_gain=500 # v4l2-ctl -L .. blue_component_gain 0x009819c1 (int) : min=0 max=8191 step=1 default=512 value=500 flags=slider .. These will not be written to the internal data struct and will not be written to the WB hardware module. Thus, after starting streaming, they will be reset to default: # v4l2-ctl -L .. blue_component_gain 0x009819c1 (int) : min=0 max=8191 step=1 default=512 value=512 flags=slider .. It does not make much sense to not be able to configure the WB controls at all times. Even if the sensor would not be RAW Bayer (and in this case the WB module is unavailable), the user could configure the ISC itself, as the ISC should not care about the sensor format. Thus, when WB module is available (if the sensor changes format e.g.) it will be already configured as be user's desires. In consequence, remove the check in isc_s_awb_ctrl that will return if ISC does not know the sensor format. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27media: sta2x11: remove VIRT_TO_BUS dependencyArnd Bergmann1-1/+1
This driver does not use the virt_to_bus() function, though it depends on x86 specific fixups in the swiotlb code, which was last rewritten in commit e380a0394c36 ("x86/PCI: sta2x11: use default DMA address translation"). It is possible that the driver still fails to build on some architectures that are missing CONFIG_VIRT_TO_BUS, but it is always set on x86 machines with the STA2X11 platform enabled. More likely though is that it was never meant to depend on CONFIG_VIRT_TO_BUS, and the Kconfig dependency was kept from an out-of-tree version when the driver was originally merged. Fixes: efeb98b4e2b2 ("[media] STA2X11 VIP: new V4L2 driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27media: mediatek: vcodec: return EINVAL if plane is too smallJustin Green1-0/+1
Modify vb2ops_vdec_buf_prepare to return EINVAL if the size of the plane is less than the size of the image. Currently we just log an error and return 0 anyway, which may cause a buffer overrun bug. Signed-off-by: Justin Green <greenjustin@chromium.org> Suggested-by: Andres Calderon Jaramillo <andrescj@chromium.org> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27media: v4l2-mem2mem: prevent pollerr when last_buffer_dequeued is setMing Qian1-1/+1
If the last buffer was dequeued from the capture queue, signal userspace. DQBUF(CAPTURE) will return -EPIPE. But if output queue is empty and capture queue is empty, v4l2_m2m_poll_for_data will return EPOLLERR, This is very easy to happen in drain. When last_buffer_dequeued is set, we shouldn't return EPOLLERR, but return EPOLLIN | EPOLLRDNORM. Fixes: 1698a7f151126 ("media: v4l2-mem2mem: simplify poll logic") Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM supportTeresa Remmet3-0/+891
Add initial support for phyBOARD-Polis-i.MX8MM. Main features are: * Bluetooth and Wifi * CANFD * eMMC * i2c RTC * Ethernet * PCIe * RS232/RS485 * SD-Card * SPI-NOR flash * USB Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-27arm64: dts: imx8m{m,p}-verdin: use IT temperaturesPhilippe Schenker2-0/+16
Use IT temperature threshold for critical/passive trip point on Verdin iMX8M Plus and Mini. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-27media: mediatek: vcodec: remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: ./drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c:71:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27Merge 5.19-rc4 into usb-nextGreg Kroah-Hartman412-2488/+4382
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27media: hdpvr: fix error value returns in hdpvr_readNiels Dossche1-1/+1
Error return values are supposed to be negative in hdpvr_read. Most error returns are currently handled via an unsigned integer "ret". When setting a negative error value to "ret", the value actually becomes a large positive value, because "ret" is unsigned. Later on, the "ret" value is returned. But as ssize_t is a 64-bit signed number, the error return value stays a large positive integer instead of a negative integer. This can cause an error value to be interpreted as the read size, which can cause a buffer overread for applications relying on the returned size. Fixes: 9aba42efe85b ("V4L/DVB (11096): V4L2 Driver for the Hauppauge HD PVR usb capture device") Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27Merge 5.19-rc4 into char-misc-nextGreg Kroah-Hartman412-2488/+4382
We need the IIO fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27media: mediatek: vcodec: fix minmax.cocci warningGuo Zhengkui1-1/+1
Fix the following coccicheck warning: drivers/media/platform/mediatek/vcodec/vdec/vdec_vp9_req_lat_if.c: 694:15-16: WARNING opportunity for min(). Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27media: MAINTAINERS: add include/dt-bindings/media to MEDIA INPUT INFRASTRUCTURELukas Bulwahn1-0/+1
Maintainers of the directory Documentation/devicetree/bindings/media are also the maintainers of the corresponding directory include/dt-bindings/media. Add the file entry for include/dt-bindings/media to the appropriate section in MAINTAINERS. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27drm/mcde: Fix refcount leak in mcde_dsi_bindMiaoqian Lin1-0/+1
Every iteration of for_each_available_child_of_node() decrements the reference counter of the previous node. There is no decrement when break out from the loop and results in refcount leak. Add missing of_node_put() to fix this. Fixes: 5fc537bfd000 ("drm/mcde: Add new driver for ST-Ericsson MCDE") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220525115411.65455-1-linmq006@gmail.com
2022-06-27media: ddbridge: Remove useless license text when SPDX-License-Identifier is already usedChristophe JAILLET16-147/+3
An SPDX-License-Identifier is already in place. There is no need to duplicate part of the corresponding license. While at it, a few comments at the end of some .h files have been updated to reflect the correct include guard name (missing '_' and co.) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27media: em28xx: Remove useless license text when SPDX-License-Identifier is already usedChristophe JAILLET11-103/+0
An SPDX-License-Identifier is already in place. There is no need to duplicate part of the corresponding license. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settingsPeng Fan1-20/+20
BIT3 and BIT0 are reserved bits, should not touch. Fixes: aec8ad34f7f2 ("arm64: dts: imx8mp: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-27arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settingsPeng Fan1-8/+8
BIT3 and BIT0 are reserved bits, should not touch. Fixes: 88f7f6bcca37 ("arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-27arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settingsPeng Fan1-14/+14
BIT3 and BIT0 are reserved bits, should not touch. Fixes: 6f96852619d5 ("arm64: dts: freescale: Add support EQOS MAC on phyBOARD-Pollux-i.MX8MP") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-27arm64: dts: imx8mp-phyboard-pollux-rdk: correct uart pad settingsPeng Fan1-2/+2
BIT3 and BIT0 are reserved bits, should not touch. Fixes: 846f752866bd ("arm64: dts: imx8mp-phyboard-pollux-rdk: Change debug UART") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-27arm64: dts: imx8mp-venice-gw74xx: correct pad settingsPeng Fan1-58/+58
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Should not set reserved bit. Fixes: 7899eb6cb15d ("arm64: dts: imx: Add i.MX8M Plus Gateworks gw7400 dts support") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-27arm64: dts: imx8mp-evk: correct I2C3 pad settingsPeng Fan1-2/+2
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Although function is not broken, we should not set reserved bit. Fixes: 5e4a67ff7f69 ("arm64: dts: imx8mp-evk: Add i2c3 support") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-27media: rcar_drif: Remove useless license text when SPDX-License-Identifier is already usedChristophe JAILLET1-5/+0
An SPDX-License-Identifier is already in place. There is no need to duplicate part of the corresponding license. This is a left-over from commit adeb69705682 ("media: rcar_drif: convert to SPDX identifiers") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27arm64: dts: imx8mp-evk: correct I2C1 pad settingsPeng Fan1-2/+2
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Although function is not broken, we should not set reserved bit. Fixes: 5497bc2a2bff ("arm64: dts: imx8mp-evk: Add PMIC device") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-27arm64: dts: imx8mp-evk: correct I2C5 pad settingsPeng Fan1-2/+2
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Although function is not broken, we should not set reserved bit. Fixes: 8134822db08d ("arm64: dts: imx8mp-evk: add support for I2C5") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-27arm64: dts: imx8mp-evk: correct vbus pad settingsPeng Fan1-15/+15
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Not set reserved bit. Fixes: 9e847693c6f3 ("arm64: dts: freescale: Add i.MX8MP EVK board support") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-27arm64: dts: imx8mp-evk: correct eqos pad settingsPeng Fan1-15/+15
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Although function is not broken, we should not set reserved bit. Fixes: dc6d5dc89bad ("arm64: dts: imx8mp-evk: enable EQOS ethernet") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-27arm64: dts: imx8mp-evk: correct vbus pad settingsPeng Fan1-1/+1
0x19 is not a valid setting. According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Not set reserved bit. Fixes: 43da4f92a611 ("arm64: dts: imx8mp-evk: enable usb1 as host mode") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-27arm64: dts: imx8mp-evk: correct gpio-led pad settingsPeng Fan1-1/+1
0x19 is not a valid setting. According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Correct setting with PE PUE set, DSE set to 0. Fixes: 50d336b12f34 ("arm64: dts: imx8mp-evk: Add GPIO LED support") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-27arm64: dts: imx8mp-evk: correct the uart2 pinctl valueSherry Sun1-2/+2
According to the IOMUXC_SW_PAD_CTL_PAD_UART2_RXD/TXD register define in imx8mp RM, bit0 and bit3 are reserved, and the uart2 rx/tx pin should enable the pull up, so need to set bit8 to 1. The original pinctl value 0x49 is incorrect and needs to be changed to 0x140, same as uart1 and uart3. Fixes: 9e847693c6f3 ("arm64: dts: freescale: Add i.MX8MP EVK board support") Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.