| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The slimbus mux put operation unconditionally reports a change in value
which means that spurious events are generated. Fix this by exiting early
in that case.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220603124609.4024666-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently in slim_rx_mux_put, an RX channel gets added to a new list
even if it is already in one. This can mess up links and make either
it, the new list head, or both, get linked to the wrong entries.
This can cause an entry to link to itself which in turn ends up
making list_for_each_entry in other functions loop infinitely.
To avoid issues, always remove the RX channel from any list it's in
before adding it to a new list.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20220606152226.149164-1-y.oudjana@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
prepare callback can be called multiple times, so unprepare the stream
if its already prepared.
Without this DSP is not happy to setting the params on a already
prepared graph.
Fixes: 9b4fe0f1cd79 ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220610144818.511797-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 81da8a0b7975 ("ASoC: remove codec hw_write/control_data") removed
use of hw_write_t in struct snd_soc_codec, but it left type definition.
Fully clean it up.
Fixes: 81da8a0b7975 ("ASoC: remove codec hw_write/control_data")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220610124420.4160986-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use correct type for parsing UUIDs, this eliminates warning present,
when compiling with W=1.
Fixes: 34ae2cd53673 ("ASoC: Intel: avs: Add topology parsing infrastructure")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220610124257.4160658-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move the size checks prior to allocating memory as these checks do not need
the data to be allocated and in case of an error we would not need to free
the allocation.
The max size must not be less than the size of
struct sof_ipc_ctrl_data + struct sof_abi_hdr as the ABI header needs to
be present under all circumstances.
The check was incorrectly used or between the two size checks.
Fixes: b5cee8feb1d4 ("ASoC: SOF: topology: Make control parsing IPC agnostic")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220610084735.19397-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update the comment for the cl_dsp_init() to clarify what is done by the
function and use the chip->init_core_mask instead of BIT(0) when
unstalling/running the init core.
Complements: 2a68ff846164 ("ASoC: SOF: Intel: hda: Revisit IMR boot sequence")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220609085949.29062-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The hda_dsp_enable_core() is powering up _and_ unstall the core in one
call while the first step of the firmware loading must not unstall the
core.
The core can be unstalled only after the set cpb_cfp and the configuration
of the IPC register for the ROM_CONTROL message.
Complements: 2a68ff846164 ("ASoC: SOF: Intel: hda: Revisit IMR boot sequence")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220609085949.29062-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The hda_dsp_core_power_up() needs to be exposed so that it can be used in
hda-loader.c to correct the boot flow.
The first step must not unstall the core, it should only power up the
core(s).
Add sanity check for the core_mask while exposing it to be safe.
Complements: 2a68ff846164 ("ASoC: SOF: Intel: hda: Revisit IMR boot sequence")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220609085949.29062-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Renesas is the only user of ak4613 on upstream for now, and
commit f28dbaa958fbd8 ("ASoC: ak4613: add TDM256 support")
added TDM256 support. Renesas tested part of it, because of
board connection.
It was assuming ak4613 is probed via Audio-Graph-Card, but it
might be probed via Simple-Audio-Card either.
It will indicates WARNING in such case. This patch fixup it.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87h74v29f7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .set_jack_detect() codec component callback is invoked during card
registration, which happens when the machine driver is probed.
The issue is that this callback can race with the bus suspend/resume,
and IO timeouts can happen. This can be reproduced very easily if the
machine driver is 'blacklisted' and manually probed after the bus
suspends. The bus and codec need to be re-initialized using pm_runtime
helpers.
Previous contributions tried to make sure accesses to the bus during
the .set_jack_detect() component callback only happen when the bus is
active. This was done by changing the regcache status on a component
remove. This is however a layering violation, the regcache status
should only be modified on device probe, suspend and resume. The
component probe/remove should not modify how the device regcache is
handled. This solution also didn't handle all the possible race
conditions, and the RT700 headset codec was not handled.
This patch tries to resume the codec device before handling the jack
initializations. In case the codec has not yet been initialized,
pm_runtime may not be enabled yet, so we don't squelch the -EACCES
error code and only stop the jack information. When the codec reports
as attached, the jack initialization will proceed as usual.
BugLink: https://github.com/thesofproject/linux/issues/3643
Fixes: 7ad4d237e7c4a ('ASoC: rt711-sdca: Add RT711 SDCA vendor-specific driver')
Fixes: 899b12542b089 ('ASoC: rt711: add snd_soc_component remove callback')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The workqueues are initialized in the io_init functions, which isn't
quite right. In some tests, this leads to warnings throw from
__queue_delayed_work()
WARN_ON_FUNCTION_MISMATCH(timer->function, delayed_work_timer_fn);
Move all the initializations to the probe functions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Realtek headset codec drivers typically check if the card is
instantiated before proceeding with the jack detection.
The rt700, rt711 and rt711-sdca are however missing a check on the
card pointer, which can lead to NULL dereferences encountered in
driver bind/unbind tests.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Follow the same flow as rt711-sdca and initialize all mutexes at probe
time.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the card registration fails, typically because of deferred probes,
the device properties added for headset codecs are not removed, which
leads to kernel oopses in driver bind/unbind tests.
We already clean-up the device properties when the card is removed,
this code can be moved as a helper and called upon card registration
errors.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In codec driver bind/unbind test, the following warning is thrown:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
...
[ 699.182495] rt711_sdca_jack_init+0x1b/0x1d0 [snd_soc_rt711_sdca]
[ 699.182498] rt711_sdca_set_jack_detect+0x3b/0x90 [snd_soc_rt711_sdca]
[ 699.182500] snd_soc_component_set_jack+0x24/0x50 [snd_soc_core]
A quick check in the code shows that the 'calibrate_mutex' used by
this driver are not initialized at probe time. Moving the
initialization to the probe removes the issue.
BugLink: https://github.com/thesofproject/linux/issues/3644
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When binding/unbinding codec drivers, the following warnings are
thrown:
[ 107.266879] rt715-sdca sdw:3:025d:0714:01: Unbalanced pm_runtime_enable!
[ 306.879700] rt711-sdca sdw:0:025d:0711:01: Unbalanced pm_runtime_enable!
Add a remove callback for all Realtek/Maxim SoundWire codecs and remove this
warning.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Memory controller drivers - fixes for v5.19
Broken in current cycle:
1. OMAP GPMC: fix Kconfig dependency for OMAP_GPMC, so it will not be visible
for everyone (driver is specific to OMAP).
Broken before:
1. Mediatek SMI: fix missing put_device() in error paths.
2. Exynos DMC: fix OF node leaks in error paths.
* tag 'memory-controller-drv-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: samsung: exynos5422-dmc: Fix refcount leak in of_get_dram_timings
memory: mtk-smi: add missing put_device() call in mtk_smi_device_link_common
memory: omap-gpmc: OMAP_GPMC should depend on ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3
Link: https://lore.kernel.org/r/20220624081819.33617-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Samsung fixes for v5.19
Both fixes are for issues present before v5.19 merge window:
1. Correct UART clocks on Exynos7885. Although the initial, fixed
DTS commit is from v5.18, the issue will be exposed with a upcoming fix
to Exynos7885 clock driver, so we need to correct the DTS earlier.
2. Fix theoretical OF node leak in Exynos machine code.
* tag 'samsung-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos: Fix refcount leak in exynos_map_pmu
arm64: dts: exynos: Correct UART clocks on Exynos7885
Link: https://lore.kernel.org/r/20220624080423.31427-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This pull request contains Broadcom ARM-SoC Device Tree fixes for 5.19,
please pull the following:
- Stefan fixes the Raspberry Pi 400 GPIO expander line names to match
that of the downstream Raspberry Pi Linux tree
* tag 'arm-soc/for-5.19/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2711-rpi-400: Fix GPIO line names
Link: https://lore.kernel.org/r/20220620170745.2485199-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Devicetree fixes for TI K3 platforms for v5.19
Critical fixes for the following:
* Boot failure on J721s2 (overlap GIC memory map)
* AM64 boot fails on highspeed cards (SoC characterization updates)
* tag 'ti-k3-dt-fixes-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode
arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region
Link: https://lore.kernel.org/r/20220618031627.xxvscc22c6doaa3t@kahuna
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
In spear_setup_of_timer(), of_find_matching_node() will return a
node pointer with refcount incrementd. We should use of_node_put()
in each fail path or when it is not used anymore.
Signed-off-by: Liang He <windhl@126.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20220616093027.3984903-1-windhl@126.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 415f59142d9d ("ARM: cns3xxx: initial DT support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Update my email address in the MAINTAINERS file as the current
one will stop functioning in a while.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The print function dev_err() is redundant because platform_get_irq()
already prints an error.
Eliminate the follow coccicheck warning:
./drivers/gpu/drm/logicvc/logicvc_drm.c:352:2-9: line 352 is redundant
because platform_get_irq() already prints an error
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613012658.85814-1-yang.lee@linux.alibaba.com
|
|
Return -EINVAL if logicvc_layer_formats_lookup() fails. Don't return
success.
Fixes: efeeaefe9be5 ("drm: Add support for the LogiCVC display controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yqh6VdNiDvJYMOQ+@kili
|
|
The "regmap" is supposed to be initialized to NULL but it's used
without being initialized.
Fixes: efeeaefe9be5 ("drm: Add support for the LogiCVC display controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yqh6OfSiPFuVrGo4@kili
|
|
Thanks to the recent commit 0a97953fd221 ("lib: add
bitmap_{from,to}_arr64") now we can directly convert a U64 value into a
bitmap and vice verse.
However when checking the header there is duplicated helper for
bitmap_to_arr64(), but no bitmap_from_arr64().
Just fix the copy-n-paste error.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
This test verifies that bpf_loop() inlining works as expected when
address of `env->prog` is updated. This address is updated upon BPF
program reallocation.
Reallocation is handled by bpf_prog_realloc(), which reuses old memory
if page boundary is not crossed. The value of `len` in the test is
chosen to cross this boundary on bpf_loop() patching.
Verify that the use-after-free bug in inline_bpf_loop() reported by
Dan Carpenter is fixed.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220624020613.548108-3-eddyz87@gmail.com
|
|
As reported by Dan Carpenter, the following statements in inline_bpf_loop()
might cause a use-after-free bug:
struct bpf_prog *new_prog;
// ...
new_prog = bpf_patch_insn_data(env, position, insn_buf, *cnt);
// ...
env->prog->insnsi[call_insn_offset].imm = callback_offset;
The bpf_patch_insn_data() might free the memory used by env->prog.
Fixes: 1ade23711971 ("bpf: Inline calls to bpf_loop when callback is known")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220624020613.548108-2-eddyz87@gmail.com
|
|
We use cifs_tcp_ses_lock to protect a lot of things.
Not only does it protect the lists of connections, sessions,
tree connects, open file lists, etc., we also use it to
protect some fields in each of it's entries.
In this case, cifs_mark_ses_for_reconnect takes the
cifs_tcp_ses_lock to traverse the lists, and then calls
cifs_update_iface. However, that can end up calling
cifs_put_tcp_session, which picks up the same lock again.
Avoid this by taking a ref for the session, drop the lock,
and then call update iface.
Also, in cifs_update_iface, avoid nested locking of iface_lock
and chan_lock, as much as possible. When unavoidable, we need
to pick iface_lock first.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Enhance readability a bit.
Signed-off-by: Simon Wang <wangchuanguo@inspur.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220622031923.65692-1-wangchuanguo@inspur.com
|
|
The IOMMU mailing list will move from lists.linux-foundation.org to
lists.linux.dev. The hard switch of the archive will happen on July
5th, but add the new list now already so that people start using the
list when sending patches. After July 5th the old list will disappear.
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220624125139.412-1-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add support for the CLSA3541 ACPI device ID used on Valve's Steam Deck.
The driver is fully compatible with the indicated hardware, hence no
additional changes are required.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: David Rhodes <drhodes@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220621213819.262537-1-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'ret'.
This was found by coccicheck:
sound/soc/rockchip/rockchip_i2s.c:810 rockchip_i2s_probe() warn: missing error code 'ret'.
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220624082745.68367-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The existing offset of TAD_PRF and TAD_PFC registers are incorrect.
Hence, fix with the right register offsets.
Also, drop read of TAD_PRF register in tad_pmu_event_counter_start()
since we don't have to preserve any bit fields and always write
an updated value.
Signed-off-by: Tanmay Jagdale <tanmay@marvell.com>
Link: https://lore.kernel.org/r/20220614171356.773967-1-tanmay@marvell.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
An SPDX-License-Identifier is already in place. There is no need to
duplicate part of the corresponding license.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/4a8016a6da9cc6815cfa0f97ae8d3dd862797bda.1654936653.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Get rid of some clunky open coded arithmetic on section addresses, by
emitting the trampoline data variables into a separate, dedicated r/o
data section, and putting it at the next page boundary. This way, we can
access the literals via single LDR instruction.
While at it, get rid of other, implicit literals, and use ADRP/ADD or
MOVZ/MOVK sequences, as appropriate. Note that the latter are only
supported for CONFIG_RELOCATABLE=n (which is usually the case if
CONFIG_RANDOMIZE_BASE=n), so update the CPP conditionals to reflect
this.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220622161010.3845775-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The complete() function may be called even though request is not
completed. In this case, it's necessary to check request status so
as not to set device address wrongly.
Fixes: 10775eb17bee ("usb: chipidea: udc: update gadget states according to ch9")
cc: <stable@vger.kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20220623030242.41796-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Re-reading a recently merged fix to the raw_gadget driver showed that
it inadvertently introduced a double-free bug in a failure pathway.
If raw_ioctl_init() encounters an error after the driver ID number has
been allocated, it deallocates the ID number before returning. But
when dev_free() runs later on, it will then try to deallocate the ID
number a second time.
Closely related to this issue is another error in the recent fix: The
ID number is stored in the raw_dev structure before the code checks to
see whether the structure has already been initialized, in which case
the new ID number would overwrite the earlier value.
The solution to both bugs is to keep the new ID number in a local
variable, and store it in the raw_dev structure only after the check
for prior initialization. No errors can occur after that point, so
the double-free will never happen.
Fixes: f2d8c2606825 ("usb: gadget: Fix non-unique driver names in raw-gadget driver")
CC: Andrey Konovalov <andreyknvl@gmail.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YrMrRw5AyIZghN0v@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix following includecheck warning:
./drivers/usb/gadget/function/u_ether.c: linux/etherdevice.h is included
more than once.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220623010808.9816-1-yang.lee@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
there is an unexpected word "the" in the comments that need to be dropped
file: ./drivers/usb/host/max3421-hcd.c
line: 315
* reasonable overview of how control transfers use the the IN/OUT
changed to:
* reasonable overview of how control transfers use the IN/OUT
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/r/20220622103003.5420-1-jiangjian@cdjrlc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
there is an unexpected word "the" in the comments that need to be dropped
file: ./drivers/usb/dwc2/hcd.c
line: 1002
* even and the current frame number is even the the transfer
changed to:
* even and the current frame number is even the transfer
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/r/20220622103558.6647-1-jiangjian@cdjrlc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When using usb-role-switch, D+ pull-up is set as soon as DTCL_SFTDISCON is
cleared, whatever the vbus valid signal state is. The pull-up should not
be set when vbus isn't present (this is determined by the drd controller).
This patch ensures that B-Session (so Peripheral role + vbus valid signal)
is valid before clearing the DCTL_SFTDISCON bit when role switch is used.
Keep original behavior when usb-role-switch isn't used.
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20220622160717.314580-1-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These error paths return success but they need to return a negative
error code.
Fixes: 7a96b6ea90a4 ("usb: musb: Add support for PolarFire SoC's musb controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YrVmLEc/FOEzNdzj@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Ido Schimmel says:
====================
mlxsw: Unified bridge conversion - part 3/6
This is the third part of the conversion of mlxsw to the unified bridge
model.
Like the second part, this patchset does not begin the conversion, but
instead prepares the FID code for it. The individual changes are
relatively small and self-contained with detailed description and
motivation in the commit message.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function was designed to configure both VLAN and FID RIFs, but
currently the driver does not use VLAN RIFs. Instead, it emulates VLAN
RIFs using FID RIFs.
As part of the conversion to the unified bridge model, the driver will
need to use VLAN RIFs, but they will be configured differently from FID
RIFs.
As a preparation for this change, rename the function to reflect the
fact that it is specific to FID RIFs and do not pass the RIF type as an
argument.
This leaves mlxsw_reg_ritr_fid_set() unused, so remove it.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the driver emulates 802.1Q FIDs using 802.1D FIDs. As such,
the RIFs configured on top of these FIDs are FID RIFs and not VLAN RIFs.
As part of converting the driver to the unified bridge model, 802.1Q
FIDs and VLAN RIFs will be used.
As a preparation for this change, rename the emulated VLAN RIFs from
'MLXSW_SP_RIF_TYPE_VLAN' to 'MLXSW_SP_RIF_TYPE_VLAN_EMU'. After the
conversion the emulated VLAN RIFs will be removed.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Egress VID for layer 2 multicast is determined from two tables, the MPE
and PGT tables. The MPE table is a two dimensional table indexed by local
port and SMPE index, which should be thought of as a FID index.
In Spectrum-1 the SMPE index is derived from the PGT entry, whereas in
Spectrum-2 and newer ASICs the SMPE index is a FID attribute configured
via the SFMR register.
The validity of the SMPE index in SFMR is influenced from two factors:
1. FID family. SMPE index is reserved for rFIDs, as their flooding is
handled by firmware.
2. ASIC generation. SMPE index is always reserved for Spectrum-1.
As such, the validity of the SMPE index should be an attribute of the FID
family and have different arrays of FID families per-ASIC type.
As a preparation for SMPE index configuration, create separate arrays of
FID families for different ASICs.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function configures {Port, VID}->FID classification entries using
the SVFA register. In the unified bridge model such entries will need to
be programmed with an ingress RIF parameter, which is a FID attribute.
As a preparation for this change, pass the FID structure itself to the
function.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Mark Brown
Yassine Oudjana
Srinivas Kandagatla
Amadeusz Sławiński
Peter Ujfalusi
Kuninori Morimoto
Pierre-Louis Bossart
Arnd Bergmann
Liang He
Miaoqian Lin
Thara Gopinath
Yang Li
Dan Carpenter
Qu Wenruo
Eduard Zingerman
Shyam Prasad N
Simon Wang
Joerg Roedel
Cristian Ciocaltea
Jiapeng Chong
Tanmay Jagdale
Christophe JAILLET
Ard Biesheuvel
Xu Yang
Alan Stern
Jiang Jian
Amelie Delaunay
David S. Miller
Amit Cohen