aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-06-20fbcon: Fix boundary checks for fbcon=vc:n1-n2 parametersHelge Deller1-3/+5
The user may use the fbcon=vc:<n1>-<n2> option to tell fbcon to take over the given range (n1...n2) of consoles. The value for n1 and n2 needs to be a positive number and up to (MAX_NR_CONSOLES - 1). The given values were not fully checked against those boundaries yet. To fix the issue, convert first_fb_vc and last_fb_vc to unsigned integers and check them against the upper boundary, and make sure that first_fb_vc is smaller than last_fb_vc. Cc: stable@vger.kernel.org # v4.19+ Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/YpkYRMojilrtZIgM@p100
2022-06-20fbcon: Fix accelerated fbdev scrolling while logo is still shownHelge Deller1-4/+0
There is no need to directly skip over to the SCROLL_REDRAW case while the logo is still shown. When using DRM, this change has no effect because the code will reach the SCROLL_REDRAW case immediately anyway. But if you run an accelerated fbdev driver and have FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION enabled, console scrolling is slowed down by factors so that it feels as if you use a 9600 baud terminal. So, drop those unnecessary checks and speed up fbdev console acceleration during bootup. Cc: stable@vger.kernel.org # v5.10+ Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/YpkYxk7wsBPx3po+@p100
2022-06-20drm/i915/fdinfo: Don't show engine classes not presentTvrtko Ursulin1-2/+3
Stop displaying engine classes with no engines - it is not a huge problem if they are shown, since the values will correctly be all zeroes, but it does count as misleading. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 055634e4b62f ("drm/i915: Expose client engine utilisation via fdinfo") Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220616140056.559074-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 9f1b1d0b2242171b2891a0398def233801601c14) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-06-20drm/i915: Implement w/a 22010492432 for adl-sVille Syrjälä1-2/+2
adl-s needs the combo PLL DCO fraction w/a as well. Gets us slightly more accurate clock out of the PLL. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220613201439.23341-1-ville.syrjala@linux.intel.com Reviewed-by: Matt Roper <matthew.d.roper@intel.com> (cherry picked from commit d36bdd77b9e6aa7f5cb7b0f11ebbab8e5febf10b) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-06-20wcn36xx: Fix typo in commentXiang wangx1-2/+2
Delete the redundant word 'the'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220613172818.7491-1-wangxiang@cdjrlc.com
2022-06-20ath6kl: avoid flush_scheduled_work() usageTetsuo Handa1-4/+12
As per commit c4f135d643823a86 ("workqueue: Wrap flush_workqueue() using a macro") says, use per "struct ath6kl_usb" workqueue. This is a blind conversion, and is only compile tested. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/f78ddbdc-8989-a1a7-2234-ce9ec3894625@I-love.SAKURA.ne.jp
2022-06-20ath9k: htc: clean up statistics macrosPavel Skripkin3-31/+35
I've changed *STAT_* macros a bit in previous patch and I seems like they become really unreadable. Align these macros definitions to make code cleaner and fix folllowing checkpatch warning ERROR: Macros with complex values should be enclosed in parentheses Also, statistics macros now accept an hif_dev as argument, since macros that depend on having a local variable with a magic name don't abide by the coding style. No functional change Suggested-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/ebb2306d06a496cd1b032155ae52fdc5fa8cc2c5.1655145743.git.paskripkin@gmail.com
2022-06-20ath9k: fix use-after-free in ath9k_hif_usb_rx_cbPavel Skripkin2-6/+7
Syzbot reported use-after-free Read in ath9k_hif_usb_rx_cb() [0]. The problem was in incorrect htc_handle->drv_priv initialization. Probable call trace which can trigger use-after-free: ath9k_htc_probe_device() /* htc_handle->drv_priv = priv; */ ath9k_htc_wait_for_target() <--- Failed ieee80211_free_hw() <--- priv pointer is freed <IRQ> ... ath9k_hif_usb_rx_cb() ath9k_hif_usb_rx_stream() RX_STAT_INC() <--- htc_handle->drv_priv access In order to not add fancy protection for drv_priv we can move htc_handle->drv_priv initialization at the end of the ath9k_htc_probe_device() and add helper macro to make all *_STAT_* macros NULL safe, since syzbot has reported related NULL deref in that macros [1] Link: https://syzkaller.appspot.com/bug?id=6ead44e37afb6866ac0c7dd121b4ce07cb665f60 [0] Link: https://syzkaller.appspot.com/bug?id=b8101ffcec107c0567a0cd8acbbacec91e9ee8de [1] Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Reported-and-tested-by: syzbot+03110230a11411024147@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+c6dde1f690b60e0b9fbe@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/d57bbedc857950659bfacac0ab48790c1eda00c8.1655145743.git.paskripkin@gmail.com
2022-06-20xtensa: change '.bss' to '.section .bss'Max Filippov1-1/+1
For some reason (ancient assembler?) the following build error is reported by the kisskb: kisskb/src/arch/xtensa/kernel/entry.S: Error: unknown pseudo-op: `.bss': => 2176 Change abbreviated '.bss' to the full '.section .bss, "aw"' to fix this error. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2022-06-20media: pvrusb2: fix memory leak in pvr_probeDongliang Mu1-0/+1
The error handling code in pvr2_hdw_create forgets to unregister the v4l2 device. When pvr2_hdw_create returns back to pvr2_context_create, it calls pvr2_context_destroy to destroy context, but mp->hdw is NULL, which leads to that pvr2_hdw_destroy directly returns. Fix this by adding v4l2_device_unregister to decrease the refcount of usb interface. Reported-by: syzbot+77b432d57c4791183ed4@syzkaller.appspotmail.com Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: rcar-vin: Fix channel routing for EbisuNiklas Söderlund1-1/+1
When converting to full Virtual Channel routing an error crept into the routing table for Ebisu (r8a77990). The routing information is used at probe time preventing rcar-vin from probing correctly on this SoC, solve by correcting the routing table. Fixes: 3e52419ec04f9769 ("media: rcar-{csi2,vin}: Move to full Virtual Channel routing per CSI-2 IP") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: mediatek/vcodec: Enable incoherent buffer allocationJustin Green1-0/+2
Set allow_cache_hints to 1 for the vb2_queue source and destination queues in the mediatek vcodec V4L2 driver. This allows us to allocate buffers with the V4L2_MEMORY_FLAG_NON_COHERENT set. On Mediatek SoCs, this enables caching for this memory, which vastly improves performance when being read from CPU. Read performance for these buffers is in turn important for detiling MM21 video frames in userspace software, such as libyuv or gstreamer. This change should be safe from race conditions since videobuf2 already invalidates or flushes the appropriate cache lines in its prepare() and finish() methods. Tested on a MT8183 SoC. Resulted in both correct detiling and a 10X speedup. Signed-off-by: Justin Green <greenjustin@chromium.org> Suggested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: amphion: delete unnecessary NULL checkZiyang Xuan3-6/+3
vfree(NULL) is safe. NULL check before vfree() is not needed. Delete them to simplify the code. Generated by coccinelle script: scripts/coccinelle/free/ifnullfree.cocci Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: ming_qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: imx-jpeg: Implement drain using v4l2-mem2mem helpersMing Qian2-84/+73
v4l2 m2m has supplied some helper function to handle drain, so the driver can use the helper function directly. Fixes: d8ebe298d008c ("media: imx-jpeg: Set V4L2_BUF_FLAG_LAST at eos") Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: imx-jpeg: Align upwards buffer sizeMing Qian1-51/+37
The hardware can support any image size WxH, with arbitrary W (image width) and H (image height) dimensions. Align upwards buffer size for both encoder and decoder. and leave the picture resolution unchanged. For decoder, the risk of memory out of bounds can be avoided. For both encoder and decoder, the driver will lift the limitation of resolution alignment. For example, the decoder can support jpeg whose resolution is 227x149 the encoder can support nv12 1080P, won't change it to 1920x1072. Fixes: 2db16c6ed72ce ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder") Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: imx-jpeg: Leave a blank space before the configuration dataMing Qian1-1/+8
There is a hardware bug that it will load the first 128 bytes of configuration data twice, it will led to some configure error. so shift the configuration data 128 bytes, and make the first 128 bytes all zero, then hardware will load the 128 zero twice, and ignore them as garbage. then the configuration data can be loaded correctly Fixes: 2db16c6ed72ce ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder") Signed-off-by: Ming Qian <ming.qian@nxp.com> Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com> Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: imx-jpeg: Correct some definition according specificationMing Qian1-4/+4
the register CAST_NOMFRSIZE_LO should be equal to CAST_STATUS16 the register CAST_NOMFRSIZE_HI should be equal to CAST_STATUS17 the register CAST_OFBSIZE_LO should be equal to CAST_STATUS18 the register CAST_OFBSIZE_HI should be equal to CAST_STATUS19 Fixes: 2db16c6ed72ce ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder") Signed-off-by: Ming Qian <ming.qian@nxp.com> Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: platform: fix missing/incorrect resource cleanup in error caseChengguang Xu1-2/+1
In error case of s5p_mfc_power_on() we should call clk_disable_unprepare() for the clocks(from pm->clocks[0] to pm->clocks[i-1]). Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: amphion: Replace zero-length array with flexible-array memberKees Cook1-1/+1
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2][3]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays [3] https://github.com/KSPP/linux/issues/78 Fixes: 9f599f351e86 ("media: amphion: add vpu core driver") Cc: Ming Qian <ming.qian@nxp.com> Cc: Shijie Qin <shijie.qin@nxp.com> Cc: Zhou Peng <eagle.zhou@nxp.com> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: ming_qian <ming.qian@nxp.com> Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: Hantro: Correct G2 init qp fieldBenjamin Gaignard1-1/+1
Documentation said that g2 init_qp field use bits 24 to 30 of the 8th register. Change the field mask to be able to set 7 bits and not only 6 of them. Conformance test INITQP_B_Main10_Sony_1 decoding is OK with this patch. Fixes: cb5dd5a0fa518 ("media: hantro: Introduce G2/HEVC decoder") Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: mediatek: vcodec: Use kmemdup rather than kmalloc/memcpyHaowen Bai1-2/+1
kmemdup is introduced to duplicate a region of memory in a neat way. Rather than kmalloc/kzalloc + memcpy, which the programmer needs to write the size twice (sometimes lead to mistakes), kmemdup improves readability, leads to smaller code and also reduce the chances of mistakes. Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: atmel: atmel-isc-base: move cropping settings outside start_dmaEugen Hristev1-4/+10
The cropping configuration of the Parallel Front Engine (PFE) can be done just once when the streaming starts. The ISC configuration is in place and will not be changed while streaming. It is not effective to keep rewriting the crop registers configuration everytime start_dma is called, as this can be called for each queued buffer. Thus we can configure the cropping at start_streaming time. This change moves the code to a dedicated function. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: camss: Move and unexport functions specific to ISPIFVladimir Zapolskiy3-39/+37
Common exported functions msm_vfe_get_vfe_id() and msm_vfe_get_vfe_line_id() do not have any users outside of camss-ispif.c, move them to the latter object and staticize. The change is supposed to be a non-functional one. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: amphion: return error if format is unsupported by vpuMing Qian2-2/+6
return error if format is unsupported by vpu, otherwise the vpu will be stalled at decoding Fixes: 3cd084519c6f9 ("media: amphion: add vpu v4l2 m2m support") Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: staging: atomisp: fix typo in commentJulia Lawall1-1/+1
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: platform: exynos4-is: fix typos in commentsJulia Lawall2-2/+2
Spelling mistakes (triple letters) in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: mediatek: vcodec: fix typo in commentJulia Lawall1-1/+1
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: platform: exynos-gsc: fix typo in commentJulia Lawall1-1/+1
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: tw686x: Register the irq at the end of probeZheyu Ma1-10/+8
We got the following warning when booting the kernel: [ 3.243674] INFO: trying to register non-static key. [ 3.243922] The code is fine but needs lockdep annotation, or maybe [ 3.244230] you didn't initialize this object before use? [ 3.245642] Call Trace: [ 3.247836] lock_acquire+0xff/0x2d0 [ 3.248727] tw686x_audio_irq+0x1a5/0xcc0 [tw686x] [ 3.249211] tw686x_irq+0x1f9/0x480 [tw686x] The lock 'vc->qlock' will be initialized in tw686x_video_init(), but the driver registers the irq before calling the tw686x_video_init(), and we got the warning. Fix this by registering the irq at the end of probe Fixes: 704a84ccdbf1 ("[media] media: Support Intersil/Techwell TW686x-based video capture cards") Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: tw5864: Convert to use managed functions pcim* and devm*Zheyu Ma1-23/+7
When removing the module, we will get the follow flaw: [ 69.323999] remove_proc_entry: removing non-empty directory 'irq/21', leaking at least 'tw5864' [ 69.324449] WARNING: CPU: 0 PID: 395 at fs/proc/generic.c:717 remove_proc_entry+0x389/0x3f0 [ 69.326909] RIP: 0010:remove_proc_entry+0x389/0x3f0 [ 69.331089] Call Trace: [ 69.331215] <TASK> [ 69.331327] unregister_irq_proc+0x14c/0x170 [ 69.332579] tw5864_finidev+0x12a/0x190 [tw5864] [ 69.332811] pci_device_remove+0x92/0x240 Fix this by using managed functions, this makes the error handling more simpler. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: platform: cros-ec: Add moli to the match tableScott Chao1-0/+2
The Google Moli device uses the same approach as the Google Brask which enables the HDMI CEC via the cros-ec-cec driver. Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: platform: omap: Pass a pointer to virt_to_page()Linus Walleij1-2/+2
A pointer into virtual memory is represented by a (void *) not an u32, so the compiler warns: drivers/media/platform/ti/omap/omap_voutlib.c:317:54: warning: passing argument 1 of 'virt_to_pfn' makes pointer from integer without a cast [-Wint-conversion] Fix this with an explicit cast. Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: amphion: vdec check format in enum_fmtMing Qian3-1/+18
vdec check the pixel format is supported by vpu, or is it disabled. And don't report it if the result is false Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: camss: Allocate camss struct as a managed device resourceVladimir Zapolskiy1-23/+10
The change simplifies driver's probe and remove functions, no functional change is intended. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: hantro: Be more accurate on pixel formats step_width constraintsBenjamin Gaignard8-83/+223
On Hantro G2 decoder on IMX8MQ strides requirements aren't the same for NV12_4L4 and NV12 pixel formats. The first one use a 4 bytes padding while the last one needs 16 bytes. To be sure to provide the correct stride in all cases we need: - to relax the constraints on codec formats so set step_width to 4 - use capture queue format and not the output queue format when applying the pixel format constraints. - put the correct step_width constraints on each pixel format. Move HEVC SPS validation in hantro_hevc.c to be able to perform it when setting sps control and when starting to decode the bitstream. Add a new test in HEVC SPS validation function to check if resolution is still matching the hardware constraints. With this SAODBLK_A_MainConcept_4 and SAODBLK_B_MainConcept_4 conformance tests files are correctly decoded with both NV12 and NV12_4L4 pixel formats. These two files have a resolution of 1016x760. Add defines for the various used resolutions. For other variants than Hantro G2 on IMX8M keep the same step_width to avoid regressions. Fluster HEVC test score is now 128/147 vs 126/147 with the both pixel formats as decoder output. Fluster VP9 test score stay at 147/303. [hverkuil: fix trivial checkpatch warnings] Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: airspy: respect the DMA coherency rulesOliver Neukum1-2/+15
If we want to avoid memory corruption on incoherent architectures, buffers for DMA must not reside - on the stack - embedded within other structures Allocate them separately. v2: fix uninitialized return value Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: media: jpegenc: set bit mask for jpegenckyrie wu1-0/+3
set jpeg encode DMA bit mask to support 34bits iova space(16GB) that the mt8186 iommu HW support. Whole the iova range separate to 0~4G/4G~8G/8G~12G/12G~16G, regarding which iova range jpgenc actually locate, it depends on the dma-ranges property of vdec dtsi node. Signed-off-by: kyrie wu <kyrie.wu@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: media: jpegenc: add mediatek,mt8186-jpgenc compatiblekyrie wu1-0/+6
Add mediatek,mt8186-jpgenc compatible to binding document. MT8186 iommu support 0~16GB iova. We separate it to four banks: 0~4G; 4G~8G; 8G~12G; 12G~16G. The "dma-ranges" could be used to adjust the bank we locate. If we don't set this property. The default range always is 0~4G. Signed-off-by: kyrie wu <kyrie.wu@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: rc: Directly use ida_free()keliu2-6/+6
Use ida_alloc() and ida_free() instead of the deprecated ida_simple_get() and ida_simple_remove(). Signed-off-by: keliu <liuke94@huawei.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: ttusbir: avoid unnecessary usb_unlink_urb()Oliver Neukum1-2/+0
While the completion handler is running, usb_unlink_urb() on yourself is a NOP. Remove it. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: ttusbir: NOIO during resumeOliver Neukum1-1/+1
During resume we must assume tat devices are not ready for block IO. Use GFP_NOIO. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: xbox_remote: xbox_remote_initialize() cannot failOliver Neukum1-7/+3
It cannot fail. Make it void. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: streamzap: avoid unnecessary GFP_ATOMICOliver Neukum1-1/+1
During resume() GFP_NOIO is enough. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: redrat3: no unnecessary GFP_ATOMICOliver Neukum1-2/+2
During resume() GFP_NOIO will do. No need for GFP_ATOMIC Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: imon_raw: respect DMA coherencyOliver Neukum1-4/+12
No buffer can be embedded inside a descriptor, not even a simple be64. Use a separate kmalloc() Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: iguanair: no superfluous usb_unlink_urb()Oliver Neukum1-4/+1
Unlinking yourself while the completion handler is running is a NOP. Drop it. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: igorplugusb: remove superfluous usb_unlink_urb()Oliver Neukum1-1/+0
Calling that on yourself while the completion handler is running is a NOP. Remove it. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: igorplugusb: break cyclical race on disconnectOliver Neukum1-2/+5
The driver uses a timer, that may submit the URB and the URB may start the timer. No simple order of killing can break te cycle. Poison the URB before killing the timer. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: igorplugusb: prevent use after free in probe errorOliver Neukum1-2/+2
The timer uses the URB. Free it only after the timer has been stopped. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: igorplugusb: respect DMA coherencyOliver Neukum1-1/+6
The coherency rules mean that you cannot embed a buffer inside a descriptor. kmalloc() separately. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.