| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
No funtionality change, but save us some lines.
Signed-off-by: Lin Feng <linf@wangsu.com>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This pull the static key management code for the FPU into the generic
ISA extension probing code, so it can be used by other extensions that
need static keys.
* 'riscv-static_key' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
riscv: switch has_fpu() to the unified static key mechanism
riscv: introduce unified static key mechanism for ISA extensions
|
|
Pull networking fixes from Jakub Kicinski:
"Mostly driver fixes.
Current release - regressions:
- Revert "net: Add a second bind table hashed by port and address",
needs more work
- amd-xgbe: use platform_irq_count(), static setup of IRQ resources
had been removed from DT core
- dts: at91: ksz9477_evb: add phy-mode to fix port/phy validation
Current release - new code bugs:
- hns3: modify the ring param print info
Previous releases - always broken:
- axienet: make the 64b addressable DMA depends on 64b architectures
- iavf: fix issue with MAC address of VF shown as zero
- ice: fix PTP TX timestamp offset calculation
- usb: ax88179_178a needs FLAG_SEND_ZLP
Misc:
- document some net.sctp.* sysctls"
* tag 'net-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (31 commits)
net: axienet: add missing error return code in axienet_probe()
Revert "net: Add a second bind table hashed by port and address"
net: ax25: Fix deadlock caused by skb_recv_datagram in ax25_recvmsg
net: usb: ax88179_178a needs FLAG_SEND_ZLP
MAINTAINERS: add include/dt-bindings/net to NETWORKING DRIVERS
ARM: dts: at91: ksz9477_evb: fix port/phy validation
net: bgmac: Fix an erroneous kfree() in bgmac_remove()
ice: Fix memory corruption in VF driver
ice: Fix queue config fail handling
ice: Sync VLAN filtering features for DVM
ice: Fix PTP TX timestamp offset calculation
mlxsw: spectrum_cnt: Reorder counter pools
docs: networking: phy: Fix a typo
amd-xgbe: Use platform_irq_count()
octeontx2-vf: Add support for adaptive interrupt coalescing
xilinx: Fix build on x86.
net: axienet: Use iowrite64 to write all 64b descriptor pointers
net: axienet: make the 64b addresable DMA depends on 64b archectures
net: hns3: fix tm port shapping of fibre port is incorrect after driver initialization
net: hns3: fix PF rss size initialization bug
...
|
|
The WD22TB4 Thunderbolt dock at least will revert its DP_MAX_LINK_RATE
from HBR3 to HBR2 after system suspend/resume if the DP_DP13_DPCD_REV
registers are not read subsequently also as required.
Fix this by reading DP_DP13_DPCD_REV registers as well, matching what is
done during connector detection. While at it also fix up the same call
in drm_dp_mst_dump_topology().
Cc: Lyude Paul <lyude@redhat.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5292
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v5.14+
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614094537.885472-1-imre.deak@intel.com
|
|
It should return error code in error path in axienet_probe().
Fixes: 00be43a74ca2 ("net: axienet: make the 64b addresable DMA depends on 64b archectures")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220616062917.3601-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts:
commit d5a42de8bdbe ("net: Add a second bind table hashed by port and address")
commit 538aaf9b2383 ("selftests: Add test for timing a bind request to a port with a populated bhash entry")
Link: https://lore.kernel.org/netdev/20220520001834.2247810-1-kuba@kernel.org/
There are a few things that need to be fixed here:
* Updating bhash2 in cases where the socket's rcv saddr changes
* Adding bhash2 hashbucket locks
Links to syzbot reports:
https://lore.kernel.org/netdev/00000000000022208805e0df247a@google.com/
https://lore.kernel.org/netdev/0000000000003f33bc05dfaf44fe@google.com/
Fixes: d5a42de8bdbe ("net: Add a second bind table hashed by port and address")
Reported-by: syzbot+015d756bbd1f8b5c8f09@syzkaller.appspotmail.com
Reported-by: syzbot+98fd2d1422063b0f8c44@syzkaller.appspotmail.com
Reported-by: syzbot+0a847a982613c6438fba@syzkaller.appspotmail.com
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20220615193213.2419568-1-joannelkoong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit cc6111375cec ("ARM: drop efm32 platform") removed the platform,
so no need to still carry the bindings.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220615210720.6363-1-wsa@kernel.org
|
|
It accidently ended up in i2c, but it should be in the hwmon folder.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220615211619.6742-1-wsa@kernel.org
|
|
Convert RDA Micro interrupt controller bindings to DT schema format.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220611180703.GA24988@standask-GA-A55M-S2HP
|
|
This is to use the unified static key mechanism instead of putting
static key related here and there.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20220522153543.2656-3-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, riscv has several extensions which may not be supported on
all riscv platforms, for example, FPU and so on. To support unified
kernel Image style, we need to check whether the feature is supported
or not. If the check sits at hot code path, then performance will be
impacted a lot. static key can be used to solve the issue. In the past,
FPU support has been converted to use static key mechanism. I believe
we will have similar cases in the future.
This patch tries to add an unified mechanism to use static keys for
some ISA extensions by implementing an array of default-false static keys
and enabling them when detected.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20220522153543.2656-2-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
We currently export set_cpu_feature() to modules but there are no in tree
users that can be built as modules and it is hard to see cases where it
would make sense for there to be any such users. Remove the export to avoid
anyone else having to worry about why it is there and ensure that any users
that do get added get a bit more visiblity.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220615191504.626604-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This merge commit includes shared updates to net-next and rdma-next
for upcoming mlx5 features.
1) Updated HW bits and definitions for upcoming features
1.1) vport debug counters
1.2) flow meter
1.3) Execute ASO action for flow entry
1.4) enhanced CQE compression
2) Add ICM header-modify-pattern RDMA API
Leon Says
=========
SW steering manipulates packet's header using "modifying header" actions.
Many of these actions do the same operation, but use different data each time.
Currently we create and keep every one of these actions, which use expensive
and limited resources.
Now we introduce a new mechanism - pattern and argument, which splits
a modifying action into two parts:
1. action pattern: contains the operations to be applied on packet's header,
mainly set/add/copy of fields in the packet
2. action data/argument: contains the data to be used by each operation
in the pattern.
This way we reuse same patterns with different arguments to create new
modifying actions, and since many actions share the same operations, we end
up creating a small number of patterns that we keep in a dedicated cache.
These modify header patterns are implemented as new type of ICM memory,
so the following kernel patch series add the support for this new ICM type.
==========
Link: https://lore.kernel.org/all/20220614184028.51548-1-saeed@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Currently rxe_alloc checks ret to indicate error, but 1 is also a valid
return and just indicates that the allocation succeeded with a wrap.
Fix this by modifying the check to be < 0.
Link: https://lore.kernel.org/r/20220609070656.1446121-1-dzm91@hust.edu.cn
Fixes: 3225717f6dfa ("RDMA/rxe: Replace red-black trees by xarrays")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The "irq" field of struct dw_edma_chip was never used. Remove it.
Link: https://lore.kernel.org/r/20220524152159.2370739-2-Frank.Li@nxp.com
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
|
|
When delayed allocation is disabled (either through mount option or
because we are running low on free space), ext4_write_begin() allocates
blocks with EXT4_GET_BLOCKS_IO_CREATE_EXT flag. With this flag extent
merging is disabled and since ext4_write_begin() is called for each page
separately, we end up with a *lot* of 1 block extents in the extent tree
and following writeback is writing 1 block at a time which results in
very poor write throughput (4 MB/s instead of 200 MB/s). These days when
ext4_get_block_unwritten() is used only by ext4_write_begin(),
ext4_page_mkwrite() and inline data conversion, we can safely allow
extent merging to happen from these paths since following writeback will
happen on different boundaries anyway. So use
EXT4_GET_BLOCKS_CREATE_UNRIT_EXT instead which restores the performance.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220520111402.4252-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Local variable chan is initialized by an address of element of chan array
that is part of stm32_mdma_device struct, so it does not make sense to
compare chan with NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver")
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/1655072638-9103-1-git-send-email-khoroshilov@ispras.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add Fenghua as maintainer of the idxd driver.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20220615232651.177098-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Due to a silly oversight on my part, making the simple switch to
of_io_request_and_map() in the DT path inadvertently introduced
divergent behaviour, whereby failng to request an iomem region now
becomes fatal for DT, vs. being silently ignored for ACPI.
Refactor a bit harder, so that request errors are non-fatal in both
paths as intended, but also consistently reported as well.
Reported-by: Matt Ranostay <mranostay@ti.com>
Fixes: 2b2cd74a06c3 ("irqchip/gic-v3: Claim iomem resources")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/5f2b57a0131f3082fae9d3002d360bf784ccb092.1655387206.git.robin.murphy@arm.com
|
|
We have already check the io_error and uptodate flag before submitting
the superblock buffer, and re-set the uptodate flag if it has been
failed to write out. But it was lockless and could be raced by another
ext4_commit_super(), and finally trigger '!uptodate' WARNING when
marking buffer dirty. Fix it by submit buffer directly.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220520023216.3065073-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
If CONFIG_PHYS_ADDR_T_64BIT is not set:
drivers/dma/apple-admac.c: In function ‘admac_cyclic_write_one_desc’:
drivers/dma/apple-admac.c:213:22: error: right shift count >= width of type [-Werror=shift-count-overflow]
213 | writel_relaxed(addr >> 32, ad->base + REG_DESC_WRITE(channo));
| ^~
Fix this by using the {low,upp}er_32_bits() helper macros to obtain the
address parts.
Reported-by: noreply@ellerman.id.au
Fixes: b127315d9a78c011 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Acked-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20220616141312.1953819-1-geert@linux-m68k.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Maintainers of the directory Documentation/devicetree/bindings/dma
are also the maintainers of the corresponding directory
include/dt-bindings/dma.
Add the file entry for include/dt-bindings/dma to the appropriate
section in MAINTAINERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220613110326.18126-1-lukas.bulwahn@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit 873971f8fb08 ("dt-bindings: dma: Add Apple ADMAC") has a warning
in its example:
Documentation/devicetree/bindings/dma/apple,admac.example.dtb: dma-controller@238200000: interrupts-extended: [[0], [4294967295, 0, 626, 4, 0, 0]] is too short
From schema: /builds/robherring/linux-dt/Documentation/devicetree/bindings/dma/apple,admac.yaml
The problem is the number of interrupt cells can't be guessed when
there are empty '0' entries. So the example must have a valid interrupt
controller defining the number of interrupt cells.
Fixes: 873971f8fb08 ("dt-bindings: dma: Add Apple ADMAC")
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220614152503.1410755-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Remove the spi-max-frequency property from the spi0 controller
node as it is supposed to be a per SPI peripheral device property.
Reported-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/lkml/20220526014141.2872567-1-robh@kernel.org/
Signed-off-by: Nagasuresh Relli <nagasuresh.relli@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
io_req_task_prio_work_add has a strict assumption that it will only be
used with io_req_task_complete. There is a codepath that assumes this is
the case and will not even call the completion function if it is hit.
For uring_cmd with an arbitrary completion function change the call to the
correct non-priority version.
Fixes: ee692a21e9bf8 ("fs,io_uring: add infrastructure for uring-cmd")
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20220616135011.441980-1-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Wang Jianjian <wangjianjian3@huawei.com>
Link: https://lore.kernel.org/r/20220520022255.2120576-2-wangjianjian3@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Signed-off-by: Wang Jianjian <wangjianjian3@huawei.com>
Link: https://lore.kernel.org/r/20220520022255.2120576-1-wangjianjian3@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The DEVICE_BUSY_TIMEOUT value is described in the Reference Manual as:
| Timeout waiting for NAND Ready/Busy or ATA IRQ. Used in WAIT_FOR_READY
| mode. This value is the number of GPMI_CLK cycles multiplied by 4096.
So instead of multiplying the value in cycles with 4096, we have to
divide it by that value. Use DIV_ROUND_UP to make sure we are on the
safe side, especially when the calculated value in cycles is smaller
than 4096 as typically the case.
This bug likely never triggered because any timeout != 0 usually will
do. In my case the busy timeout in cycles was originally calculated as
2408, which multiplied with 4096 is 0x968000. The lower 16 bits were
taken for the 16 bit wide register field, so the register value was
0x8000. With 2970bf5a32f0 ("mtd: rawnand: gpmi: fix controller timings
setting") however the value in cycles became 2384, which multiplied
with 4096 is 0x950000. The lower 16 bit are 0x0 now resulting in an
intermediate timeout when reading from NAND.
Fixes: b1206122069aa ("mtd: rawnand: gpmi: use core timings instead of an empirical derivation")
Cc: stable@vger.kernel.org
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220614083138.3455683-1-s.hauer@pengutronix.de
|
|
Add the description of @folio and remove @page in function kernel-doc
comment to remove warnings found by running scripts/kernel-doc, which
is caused by using 'make W=1'.
fs/jbd2/transaction.c:2149: warning: Function parameter or member
'folio' not described in 'jbd2_journal_try_to_free_buffers'
fs/jbd2/transaction.c:2149: warning: Excess function parameter 'page'
description in 'jbd2_journal_try_to_free_buffers'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220512075432.31763-1-yang.lee@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Add the [484,498,445.3]MHz frequency support that will be used
by video subsystem on imx93.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220609132902.3504651-8-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
According to Reference Manual:
000b - Divide by 1
001b - Divide by 1
010b - Divide by 2
011b - Divide by 3
100b - Divide by 4
101b - Divide by 5
110b - Divide by 6
111b - Divide by 7
So only need increase rdiv by 1 when the register value is 0.
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220609132902.3504651-7-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
The PLL parameters in rate table should be directly compared with
those read from PLL registers instead of the cooked ones.
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Cc: Abel Vesa <abel.vesa@nxp.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220609132902.3504651-6-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
According to spec:
A value of 0 is disallowed and should not be programmed in this register
Fix to 1.
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220609132902.3504651-5-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
For EDMA1 in AONMIX, its parent clock should be from cm33_root,
so Correct it.
Fixes: 24defbe194b65("clk: imx: add i.MX93 clk")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220609132902.3504651-4-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
NIC_MEDIA sources from media_axi_root, not media_apb_root.
Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220609132902.3504651-3-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
When debug, find after system boot up, all adc register operation
will trigger system hang, this is because the internal adc ipg
clock is gate off. In dts, only reference the IMX93_CLK_ADC1_GATE,
which is adc1, no one touch the adc_root, so adc_root will be gate
off automatically after system boot up.
Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220609132902.3504651-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
Abstract the bit extraction from the VBT per-panel bitfields
slightly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615151445.8531-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Older VBTs don't have all the stuff we've defined for the
LVDS options block (40). In particular we're currently parsing
the DPS panel type bits even though they may not exist, which
could mean we end up flagging the machine as supporting static
DRRS when the VBT declared no such thing.
We don't actually have a clear idea which VBT versions have
which bits so we rely on the block size instead.
Here's a quick list from my VBT stash:
mgm version 108 -> 4 bytes
alv version 120 -> 4 bytes
cst version 134 -> 14 bytes
pnv version 144 -> 14 bytes
cl version 142 -> 16 bytes
ctg version 155 -> 24 bytes
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615151445.8531-2-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
Parsing the panel_type is a bit special and should be done
before we parse anything else potentially panel-specific from
the VBT. So move it out from parse_panel_options(). It doesn't
neet to be there anyway since it'll do its own LVDS options
block lookup.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615151445.8531-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
The WARN shouldn't have been added yet. For the moment the
clock that gets passed here is just what the user has requested
(via the modeline) and may not be exactly what iCLKIP can
generate.
Later on the plan is to change things so that we already get
passed the exact clock here, at which point the WARN should
be reintroduced.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6246
Fixes: 97708335b04d ("drm/i915: Introduce struct iclkip_params")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616095530.15024-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Make sure FIFO underrun reporting is flagged as disabled very
early during the state readout so that we don't get any
spurious FIFO underruns reports from intel_crtc_disable_noatomic().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615174851.20658-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Pull the underrun status sanitation into its own helper.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615174851.20658-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
For recv/recvmsg, IO either completes immediately or gets queued for a
retry. This isn't the case for read/readv, if eg a normal file or a block
device is used. Here, an operation can get queued with the block layer.
If this happens, ring mapped buffers must get committed immediately to
avoid that the next read can consume the same buffer.
Check if we're dealing with pollable file, when getting a new ring mapped
provided buffer. If it's not, commit it immediately rather than wait post
issue. If we don't wait, we can race with completions coming in, or just
plain buffer reuse by committing after a retry where others could have
grabbed the same buffer.
Fixes: c7fb19428d67 ("io_uring: add support for ring mapped supplied buffers")
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Connector polling is waking up the polled device. Polling
is unnecessary if our device is known to not have display.
Fix this and save some power by disabling starting connector
polling when we are having headless sku. Use information from
opregion.
v2: Move headless sku check into INTEL_DISPLAY_ENABLED macro
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610085429.52935-4-jouni.hogander@intel.com
|
|
Currently we are starting connector polling if display is disabled
using disable_display module parameter. Polling is just returning
always "not connected" state. This can be optimized by not starting
polling at all.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610085429.52935-3-jouni.hogander@intel.com
|
|
Export headless sku bit (bit 13) from opregion->header->pcon as an
interface to check if our device is headless configuration.
This is mainly targeted for hybrid gfx systems. E.g. when display
is not supposed to be connected discrete graphics card it's
opregion can inform this is headless graphics card.
v3: Dummy version is now static inline function
v2: Check also opregion version
Bspec: 53441
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610085429.52935-2-jouni.hogander@intel.com
|
|
The BCM2711 has a separate driver for the v3d, and thus we can't call
into any of the driver entrypoints that rely on the v3d being there.
Let's add a bunch of checks and complain loudly if that ever happen.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-15-maxime@cerno.tech
|
|
When doing an asynchronous page flip (PAGE_FLIP ioctl with the
DRM_MODE_PAGE_FLIP_ASYNC flag set), the current code waits for the
possible GPU buffer being rendered through a call to
vc4_queue_seqno_cb().
On the BCM2835-37, the GPU driver is part of the vc4 driver and that
function is defined in vc4_gem.c to wait for the buffer to be rendered,
and once it's done, call a callback.
However, on the BCM2711 used on the RaspberryPi4, the GPU driver is
separate (v3d) and that function won't do anything. This was working
because we were going into a path, due to uninitialized variables, that
was always scheduling the callback.
However, we were never actually waiting for the buffer to be rendered
which was resulting in frames being displayed out of order.
The generic API to signal those kind of completion in the kernel are the
DMA fences, and fortunately the v3d drivers supports them and signal
when its job is done. That API also provides an equivalent function that
allows to have a callback being executed when the fence is signalled as
done.
Let's change our driver a bit to rely on the previous function for the
older SoCs, and on DMA fences for the BCM2711.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://lore.kernel.org/r/20220610115149.964394-14-maxime@cerno.tech
|
|
The BCM2711 doesn't have a v3d GPU so we don't want to call into its BO
management code. Let's create an asynchronous page-flip handler for the
BCM2711 that just calls into the common code.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-13-maxime@cerno.tech
|
|
The function vc4_async_page_flip() handles asynchronous page-flips in
the vc4 driver.
However, it mixes some generic code with code that should only be run on
older generations that have the GPU handled by the vc4 driver.
Let's split the generic part out of vc4_async_page_flip() and into a
common function that we be reusable by an handler made for the BCM2711.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-12-maxime@cerno.tech
|
Lin Feng
Palmer Dabbelt
Linus Torvalds
Imre Deak
Yang Yingliang
Joanne Koong
Wolfram Sang
Stanislav Jakubek
Jisheng Zhang
Mark Brown
Leon Romanovsky
Dongliang Mu
Frank Li
Jan Kara
Alexey Khoroshilov
Dave Jiang
Robin Murphy
Zhang Yi
Geert Uytterhoeven
Lukas Bulwahn
Rob Herring
Nagasuresh Relli
Dylan Yudaken
Wang Jianjian
Sascha Hauer
Yang Li
Peng Fan
Liu Ying
Jacky Bai
Haibo Chen
Ville Syrjälä
Jens Axboe
Jouni Högander
Maxime Ripard