| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If the initial attempt at trunking detection using the krb5i auth flavor
fails with -EACCES, -NFS4ERR_CLID_INUSE, or -NFS4ERR_WRONGSEC, then the
NFS client tries again using auth_sys, cloning the rpc_clnt in the
process. If this second attempt at trunking detection succeeds, then
the resulting nfs_client->cl_rpcclient winds up having cl_max_connect=0
and subsequent attempts to add additional transport connections to the
rpc_clnt will fail with a message similar to the following being logged:
[502044.312640] SUNRPC: reached max allowed number (0) did not add
transport to server: 192.168.122.3
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Fixes: dc48e0abee24 ("SUNRPC enforce creation of no more than max_connect xprts")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Fix the following smatch warnings:
arch/arm64/kvm/vmid.c:62 flush_context() warn: inconsistent indenting
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220602024805.511457-1-sunliming@kylinos.cn
|
|
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Small patches reviewed on SOF GitHub.
|
|
On each vcpu load, we set the KVM_ARM64_HOST_SME_ENABLED
flag if SME is enabled for EL0 on the host. This is used to
restore the correct state on vpcu put.
However, it appears that nothing ever clears this flag. Once
set, it will stick until the vcpu is destroyed, which has the
potential to spuriously enable SME for userspace. As it turns
out, this is due to the SME code being more or less copied from
SVE, and inheriting the same shortcomings.
We never saw the issue because nothing uses SME, and the amount
of testing is probably still pretty low.
Fixes: 861262ab8627 ("KVM: arm64: Handle SME host state when running guests")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviwed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220528113829.1043361-3-maz@kernel.org
|
|
On each vcpu load, we set the KVM_ARM64_HOST_SVE_ENABLED
flag if SVE is enabled for EL0 on the host. This is used to restore
the correct state on vpcu put.
However, it appears that nothing ever clears this flag. Once
set, it will stick until the vcpu is destroyed, which has the
potential to spuriously enable SVE for userspace.
We probably never saw the issue because no VMM uses SVE, but
that's still pretty bad. Unconditionally clearing the flag
on vcpu load addresses the issue.
Fixes: 8383741ab2e7 ("KVM: arm64: Get rid of host SVE tracking/saving")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220528113829.1043361-2-maz@kernel.org
|
|
During device remove care needs to be taken that no work is pending
before it removes the underlying DRM bridge etc, but this can be done on
the specific work rather than waiting for the flush of the system-wide
workqueue.
Fixes: bc6fa8676ebb ("drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601233818.1877963-1-bjorn.andersson@linaro.org
|
|
Add the newly introduced spi driver to the existing PolarFire SoC entry.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220607073833.2331539-3-conor.dooley@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a driver for Microchip FPGA SPI controllers, specifically
supporting the "hard" controllers on PolarFire SoC.
Co-developed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220607073833.2331539-2-conor.dooley@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Unbinding the driver or removing the parent device at the same time
as using the OCC active sysfs file can cause the driver to unregister
the hwmon device twice. Prevent this by locking the occ mutex in the
shutdown function.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606185455.21126-1-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
'ti,n-factor' is a scalar type, so 'items' should not be used as that is
for arrays/matrix.
A pending meta-schema change will catch future cases.
Fixes: bd90c5b93950 ("dt-bindings: hwmon: Add TMP401, TMP411 and TMP43x")
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220606212223.1360395-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The strlcpy should not be used because it doesn't limit the source
length. Preferred is strscpy.
Signed-off-by: XueBing Chen <chenxuebing@jari.cn>
Link: https://lore.kernel.org/r/3e0217ca.a1d.180f90f39c7.Coremail.chenxuebing@jari.cn
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
of_graph_get_remote_node() returns remote device nodepointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: e67f6037ae1b ("drm/meson: split out encoder from meson_dw_hdmi")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601033927.47814-3-linmq006@gmail.com
|
|
of_graph_get_remote_node() returns remote device nodepointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 318ba02cd8a8 ("drm/meson: encoder_cvbs: switch to bridge with ATTACH_NO_CONNECTOR")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601033927.47814-2-linmq006@gmail.com
|
|
ASoC: Fixes for v5.19
A few more fixes for v5.19 which came in during the second half of the
merge window, again nothing that's really remarkable outside of the
individual drivers.
|
|
bpf_helpers.h has been moved to tools/lib/bpf since 5.10, so add more
including path.
Fixes: edae34a3ed92 ("selftests net: add UDP GRO fraglist + bpf self-tests")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Lina Wang <lina.wang@mediatek.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220606064517.8175-1-lina.wang@mediatek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In order to get rid of the function SetHwReg8188EU() remove the
HW_VAR_SLOT_TIME case from that function and move the functionality
into a static function in rtw_wlan_util.c.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220606064055.12565-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
asynchronus -> asynchronous
Signed-off-by: Steve Lemuel <wlemuel@hotmail.com>
Link: https://lore.kernel.org/r/SYBP282MB347864E247D2EC70BF46F9A3A0A29@SYBP282MB3478.AUSP282.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
put '*' next to variable to match kernel style from checkpatch
Signed-off-by: Daniel Watson <ozzloy@challenge-bot.com>
Link: https://lore.kernel.org/r/20220607061113.32633-1-ozzloy@challenge-bot.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix this build error noticed by the kernel test robot:
drivers/video/console/sticore.c:1132:5: error: redefinition of 'fb_is_primary_device'
arch/parisc/include/asm/fb.h:18:19: note: previous definition of 'fb_is_primary_device'
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org # v5.10+
|
|
Convert the pwm-regulator binding to DT schema format.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220606184310.1057797-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Fix refcount leak in some error paths.
Fixes: 0f83f9296d5c ("ASoC: mediatek: Add machine driver for ALC5650 codec")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220603124243.31358-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
asoc_simple_clean_reference() returns zero unconditionally. Letting it
return void instead makes it easier to see in the caller that there is no
error to handle.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220605153537.26591-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Changeset 0e336eeaf467 ("ASoC: wm8731: Convert DT bindings to YAML format")
renamed: Documentation/devicetree/bindings/sound/wm8731.txt
to: Documentation/devicetree/bindings/sound/wlf,wm8731.yaml.
Update its cross-reference accordingly.
Fixes: 0e336eeaf467 ("ASoC: wm8731: Convert DT bindings to YAML format")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/e56e54fe0ebb1b6e8dd2e245c398190016eb0a34.1654529011.git.mchehab@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
broadwell_disable_jack() returns zero unconditionally. Letting it
return void instead makes it easier to see in the callers that there is no
error to handle.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220605153904.26921-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>:
Add support for some new AMD machines.
|
|
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Uwe Kleine-König <uwe@kleine-koenig.org>:
From: Uwe Kleine-König <uwe@kleine-koenig.org>
Hello,
I intended to send this after -rc1 was cut, but found a few spare
minutes to prepare this series. All four patches were sent already
before based on v5.18, but there were some conflicting changes added in
the merge window. This series contains the four patches on top of
current linus/master and so bases on a tree including the conflicting
changes. Expecting no more sound changes in this merge window, this
should apply cleanly on top of -rc1.
Best regards
Uwe
Uwe Kleine-König (4):
ASoC: ak4642: Drop no-op remove function
ASoC: da7219: Drop no-op remove function
ASoC: lm49453: Drop no-op remove function
ASoC: da732x: Drop no-op remove function
sound/soc/codecs/ak4613.c | 6 ------
sound/soc/codecs/da7219.c | 6 ------
sound/soc/codecs/da732x.c | 6 ------
sound/soc/codecs/lm49453.c | 6 ------
4 files changed, 24 deletions(-)
base-commit: 50fd82b3a9a9335df5d50c7ddcb81c81d358c4fc
--
2.36.1
|
|
Merge series from Hui Wang <hui.wang@canonical.com>:
Taking your advice and try to enable internal PLL to get a more
accurate sample rate. And I also changed the fsl-asoc-card.c to support
the nau8822 codec, now the sound quality is pretty good on my imx6sx
EVB.
|
|
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This can probably wait for the next merge window, I found a number of
cppcheck warnings that I didn't see in my last checks. The irony is
that the only really important issue found by cppcheck was on one of
my previous DPCM changes (submitted separately as a fix).
|
|
Merge series from Sameer Pujar <spujar@nvidia.com>:
This series adds support for Output Prcoessing Module (OPE) module on
Tegra210 and later generations of SoCs. OPE is a client of AHUB and
it has sub blocks of PEQ (Parametric Equalizer) and MBDRC (Multi Band
Dynamic Range Compressor) for data processing.
An ASoC component is registered for OPE, which includes PEQ and MBDRC
functions as well. This can be plugged in audio path using ALSA mixer
controls. The series adds necessary binding documentaion, driver and
DT binding patches to enable OPE module on Jetson platforms.
|
|
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>
From there on is a range of boards appended. All of them follow the same:
This series focuses on populating boards/ subdirectory with supported
configurations by the avs-driver. Note: it is independent of recently
provided "Driver code and PCM operations" series [1], that is, code
found here should not collide with it.
Series starts with a small change that adds a helper to sound pcm
header, allowing for retrieving string naming a direction without the
need of substream pointer. Said helper is used by codec driver code that
follows it but I believe it's generic and helpful enough that it can be
called an independent addition to the sound core.
Code for generic HD-Audio codec driver follows. It is a ASoC wrapper for
existing HD-Audio codec code found in sound/pci/hda/. There is basically
no custom logic involved up to the point that driver follows
HDA_DEV_LEGACY convention, rather than the HDA_DEV_ASOC one. Commit
message for the given patch iterates on this and explains crucial parts
of the implementation.
From there on is a range of boards appended. All of them follow the same
scheme:
- define avs_create_dai_link() so DAI-LINKs can be created dynamically,
based on the link_mask (I2S) or the number of entries in the
->pcm_list_head list (HDA)
- define avs_create_dapm_routes() so DAPM routes can be created
dynamically, same rules as above apply
- define probe() function that creates new ASoC card, assign all
required operations and resources along with calling the two above
Changes in v2:
- 'link_mask' usage replaced with 'i2s_link_mask' as requested by
Pierre
- 'ssp_test' board renamed to 'i2s_test' to match naming convention used
for other i2s machine boards
- enriched commit message and Kconfig for the 'HD-Audio codec driver'
patch as requested by Kai
[1]: https://lore.kernel.org/all/20220426172346.3508411-1-cezary.rojewski@intel.com/
Amadeusz Sławiński (1):
ASoC: Intel: avs: Add max98373 machine board
Cezary Rojewski (13):
ALSA: Add snd_pcm_direction_name() helper
ASoC: codecs: Add HD-Audio codec driver
ASoC: Intel: avs: Add HDAudio machine board
ASoC: Intel: avs: Add DMIC machine board
ASoC: Intel: avs: Add I2S-test machine board
ASoC: Intel: avs: Add rt274 machine board
ASoC: Intel: avs: Add rt286 machine board
ASoC: Intel: avs: Add rt298 machine board
ASoC: Intel: avs: Add rt5682 machine board
ASoC: Intel: avs: Add nau8825 machine board
ASoC: Intel: avs: Add ssm4567 machine board
ASoC: Intel: avs: Add max98357a machine board
ASoC: Intel: avs: Add da7219 machine board
include/sound/pcm.h | 19 +-
sound/soc/codecs/Kconfig | 10 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/hda-dai.c | 102 +++++++
sound/soc/codecs/hda.c | 395 +++++++++++++++++++++++++
sound/soc/codecs/hda.h | 19 ++
sound/soc/intel/Kconfig | 3 +
sound/soc/intel/avs/Makefile | 3 +
sound/soc/intel/avs/boards/Kconfig | 121 ++++++++
sound/soc/intel/avs/boards/Makefile | 27 ++
sound/soc/intel/avs/boards/da7219.c | 282 ++++++++++++++++++
sound/soc/intel/avs/boards/dmic.c | 93 ++++++
sound/soc/intel/avs/boards/hdaudio.c | 294 ++++++++++++++++++
sound/soc/intel/avs/boards/i2s_test.c | 180 +++++++++++
sound/soc/intel/avs/boards/max98357a.c | 154 ++++++++++
sound/soc/intel/avs/boards/max98373.c | 239 +++++++++++++++
sound/soc/intel/avs/boards/nau8825.c | 353 ++++++++++++++++++++++
sound/soc/intel/avs/boards/rt274.c | 310 +++++++++++++++++++
sound/soc/intel/avs/boards/rt286.c | 281 ++++++++++++++++++
sound/soc/intel/avs/boards/rt298.c | 281 ++++++++++++++++++
sound/soc/intel/avs/boards/rt5682.c | 340 +++++++++++++++++++++
sound/soc/intel/avs/boards/ssm4567.c | 271 +++++++++++++++++
22 files changed, 3775 insertions(+), 4 deletions(-)
create mode 100644 sound/soc/codecs/hda-dai.c
create mode 100644 sound/soc/codecs/hda.c
create mode 100644 sound/soc/codecs/hda.h
create mode 100644 sound/soc/intel/avs/boards/Kconfig
create mode 100644 sound/soc/intel/avs/boards/Makefile
create mode 100644 sound/soc/intel/avs/boards/da7219.c
create mode 100644 sound/soc/intel/avs/boards/dmic.c
create mode 100644 sound/soc/intel/avs/boards/hdaudio.c
create mode 100644 sound/soc/intel/avs/boards/i2s_test.c
create mode 100644 sound/soc/intel/avs/boards/max98357a.c
create mode 100644 sound/soc/intel/avs/boards/max98373.c
create mode 100644 sound/soc/intel/avs/boards/nau8825.c
create mode 100644 sound/soc/intel/avs/boards/rt274.c
create mode 100644 sound/soc/intel/avs/boards/rt286.c
create mode 100644 sound/soc/intel/avs/boards/rt298.c
create mode 100644 sound/soc/intel/avs/boards/rt5682.c
create mode 100644 sound/soc/intel/avs/boards/ssm4567.c
--
2.25.1
|
|
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Small updates to add initial tables for MeteorLake, SoundWire machine
driver support for tests without HDMI and RT1019 for consistency on
Chromebooks.
|
|
Merge series from Vitaly Rodionov <vitalyr@opensource.cirrus.com>:
The CS35L41 Amplifier contains a DSP, capable of running firmware.
The firmware can run algorithms such as Speaker Protection, to ensure
that playback at high gains do not harm the speakers. This exports some
interfaces to allow more use of this DSP by the HDA version of the driver.
|
|
Menglong Dong says:
====================
reorganize the code of the enum skb_drop_reason
The code of skb_drop_reason is a little wild, let's reorganize them.
Three things and three patches:
1) Move the enum 'skb_drop_reason' and related function to the standalone
header 'dropreason.h', as Jakub Kicinski suggested, as the skb drop
reasons are getting more and more.
2) use auto-generation to generate the source file that convert enum
skb_drop_reason to string.
3) make the comment of skb drop reasons kernel-doc style.
Changes since v3:
3/3: remove some useless comment (Jakub Kicinski)
Changes since v2:
2/3: - add new line in the end of .gitignore
- fix awk warning by make '\;' to ';', as ';' is not need to be
escaped
- export 'drop_reasons' in skbuff.c
Changes since v1:
1/3: move dropreason.h from include/linux/ to include/net/ (Jakub Kicinski)
2/3: generate source file instead of header file for drop reasons string
array (Jakub Kicinski)
3/3: use inline comment (Jakub Kicinski)
====================
Link: https://lore.kernel.org/r/20220606022436.331005-1-imagedong@tencent.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
To make the code clear, reformat the comment in dropreason.h to k-doc
style.
Now, the comment can pass the check of kernel-doc without warnning:
$ ./scripts/kernel-doc -v -none include/linux/dropreason.h
include/linux/dropreason.h:7: info: Scanning doc for enum skb_drop_reason
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It is annoying to add new skb drop reasons to 'enum skb_drop_reason'
and TRACE_SKB_DROP_REASON in trace/event/skb.h, and it's easy to forget
to add the new reasons we added to TRACE_SKB_DROP_REASON.
TRACE_SKB_DROP_REASON is used to convert drop reason of type number
to string. For now, the string we passed to user space is exactly the
same as the name in 'enum skb_drop_reason' with a 'SKB_DROP_REASON_'
prefix. Therefore, we can use 'auto-generation' to generate these
drop reasons to string at build time.
The new source 'dropreason_str.c' will be auto generated during build
time, which contains the string array
'const char * const drop_reasons[]'.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As the skb drop reasons are getting more and more, move the enum
'skb_drop_reason' and related function to the standalone header
'dropreason.h', as Jakub Kicinski suggested.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Merge series from patrice.chotard@foss.st.com <patrice.chotard@foss.st.com>:
This series cleans up spi-stm32-qspi driver by removing unused parameters
|
|
unix_dgram_poll() calls unix_dgram_peer_wake_me() without `other`'s
lock held and check if its receive queue is full. Here we need to
use unix_recvq_full_lockless() instead of unix_recvq_full(), otherwise
KCSAN will report a data-race.
Fixes: 7d267278a9ec ("unix: avoid use-after-free in ep_remove_wait_queue")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20220605232325.11804-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When a UMR fails, the UMR QP state changes to an error state. Therefore,
all the further UMR operations will fail too.
Add a recovery flow to the UMR QP, and repost the flushed WQEs.
Link: https://lore.kernel.org/r/6cc24816cca049bd8541317f5e41d3ac659445d3.1652588303.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When the managed API is used, there is no need to explicitly call
pci_free_irq_vectors().
This looks to be a left-over from the commit in the Fixes tag. Only the
.remove() function had been updated.
So remove this unused function call and update goto label accordingly.
Fixes: 8accc467758e ("stmmac: intel: use managed PCI function on probe and resume")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Link: https://lore.kernel.org/r/1ac9b6787b0db83b0095711882c55c77c8ea8da0.1654462241.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On a machine with CX20632, Alsamixer doesn't have 'Loopback
Mixing' and 'Line'.
Signed-off-by: huangwenhui <huangwenhuia@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220607065631.10708-1-huangwenhuia@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Enable nfc node in rk3066a-mk808.dts
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220603144627.23269-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The production Quartz64 Model B has compatibility issues when using
rgmii-id mode. Switch to rgmii mode and use the SoC's delays to ensure
full compatibility.
Reported-by: Frank Mankel <frank.mankel@gmail.com>
Fixes: dcc8c66bef79 ("arm64: dts: rockchip: add Pine64 Quartz64-B device tree")
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Frank Mankel <frank.mankel@gmail.com>
Link: https://lore.kernel.org/r/20220606163023.3677147-1-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable the RK356x Video Output Processor (VOP) 2 on the Radxa
ROCK3 Model A.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220310210352.451136-4-michael.riesch@wolfvision.net
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220422072841.2206452-21-s.hauer@pengutronix.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable the RK356x Video Output Processor (VOP) 2 on the Pine64
Quartz64 Model A.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220422072841.2206452-20-s.hauer@pengutronix.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This enabled the VOP2 display controller along with hdmi and the
required port routes which is enough to get a picture out of the
hdmi port of the board.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220422072841.2206452-19-s.hauer@pengutronix.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add support for the HDMI port found on RK3568.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220422072841.2206452-18-s.hauer@pengutronix.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The VOP2 is the display output controller on the RK3568. Add the node
for it to the dtsi file along with the required display-subsystem node
and the iommu node.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220422072841.2206452-17-s.hauer@pengutronix.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Pine64 touch panel is a panel consisting of the Feiyang fy07024di26a30d
panel with a Goodix gt911 touch screen. Add the device tree nodes to the
rockpro64 to permit attaching this display to the device.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220511113517.4172962-4-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add the nodes to enable the PCIe controller on the Quartz64 Model A
board.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220429123832.2376381-6-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
Scott Mayhew
sunliming
Mark Brown
Marc Zyngier
Bjorn Andersson
Conor Dooley
Eddie James
Rob Herring
XueBing Chen
Miaoqian Lin
Takashi Iwai
Lina Wang
Michael Straube
Steve Lemuel
Daniel Watson
Helge Deller
Uwe Kleine-König
Mauro Carvalho Chehab
Paolo Abeni
Menglong Dong
Kuniyuki Iwashima
Aharon Landau
Christophe JAILLET
huangwenhui
Johan Jonker
Peter Geis
Michael Riesch
Sascha Hauer