| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
TI Driver updates for v5.19
* wkup_m3: io isolation, voltage scaling, vtt regulator and a debug option to stop m3 in suspend.
* tisci: support for polled mode for system suspend, reset driver is now enabled for COMPILE_TEST
* knav, dma.. misc cleanups for IS_ERR, pm_run_time*, and various other fixups.
* tag 'ti-driver-soc-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
soc: ti: wkup_m3_ipc: Add debug option to halt m3 in suspend
soc: ti: wkup_m3_ipc: Add support for i2c voltage scaling
soc: ti: wkup_m3_ipc: Add support for IO Isolation
soc: ti: knav_qmss_queue: Use IS_ERR instead of IS_ERR_OR_NULL when checking knav_queue_open() result
soc: ti: pm33xx: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
firmware: ti_sci: Switch transport to polled mode during system suspend
soc: ti: wkup_m3_ipc: Add support for toggling VTT regulator
soc: ti: knav_qmss_queue: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync
soc: ti: knav_dma: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync
reset: ti-sci: Allow building under COMPILE_TEST
soc: ti: ti_sci_pm_domains: Check for null return of devm_kcalloc
soc: ti: omap_prm: Use of_device_get_match_data()
soc: ti: pruss: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
soc: ti: replace usage of found with dedicated list iterator variable
soc: ti: wkup_m3_ipc: fix platform_get_irq.cocci warning
Link: https://lore.kernel.org/r/20220507163424.pvqnwrxpoo73lmp2@debtless
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
HiSilicon ARMv7 SoC updates for v5.19
- Add of_node_put to avoid the refcount leak
* tag 'hisi-armv7soc-for-5.19' of https://github.com/hisilicon/linux-hisi:
ARM: hisi: Add missing of_node_put after of_find_compatible_node
Link: https://lore.kernel.org/r/62762DF0.30602@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Qualcomm ARM defconfig updates for v5.19
This enables the Qualcomm random number generator and hardware crypto
drivers, as well as DebugFS support, in the qcom defconfig.
* tag 'qcom-defconfig-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom_defconfig: enable debug fs support
ARM: qcom_defconfig: enable options for Qualcomm random number generator
Link: https://lore.kernel.org/r/20220509182209.317208-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Qualcomm ARM64 defconfig updates for v5.19
This enables the GPI DMA driver, providing access to I2C and SPI
controllers that are setup for shared ownership. The PCIe Gen2 PHY
provides PCI support on the QCS405 platform, among others. The PMIC
watchdog, concell and ADC5 ThermalMonitor drivers provides housekeeping
services on a range of different platforms.
The Display and Video clock controllers for SM8250 are enabled, as is
the audio RX/TX macros and the WCD9335 audio codec driver.
Lastly the Ath11k driver, used on a variety of modern boards and the
FastRPC driver, which provides an interface for computational offloading
on the Hexagon cores, are enabled.
All drivers, except the SM8250 Display and Video clock controller
drivers are enabled as modules. The two clock controllers provides
power-domains and must be builtin to reduce the risk of probe deferral
happening (and being ignored) after late initcall.
* tag 'qcom-arm64-defconfig-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm GPI DMA Driver
arm64: defconfig: Enable Qualcomm PCIe Gen2 PHY
arm64: defconfig: Enable SM8250 video clock controller
arm64: defconfig: Enable PM8916 watchdog driver
arm64: defconfig: enable ath11k driver
arm64: defconfig: Enable some Qualcomm drivers
arm64: defconfig: reenable SM_DISPCC_8250
arm64: defconfig: enable wcd9335 codec as module
arm64: defconfig: enable Qualcomm RX and TX macro for SM8250 audio
Link: https://lore.kernel.org/r/20220509170158.311962-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
i.MX defconfig update for 5.19:
- Enable the WM8524 codec driver as module in arm64 defconfig for audio
support on imx8mn-evk board.
- Enable the ADC part of the STMPE MFD in imx_v6_v7_defconfig, as the
SoM Apalis/Colibri iMX6 use the ADC of a STMPE 811.
* tag 'imx-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable the WM8524 codec driver
ARM: imx_v6_v7_defconfig: Enable the ADC part of the STMPE MFD
Link: https://lore.kernel.org/r/20220508033843.2773685-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
TI K3 defconfig updates for v5.19
* Enable TIDSS and Display Port related configs
* Enable Cadence Torrent PHY for Display Port
* tag 'ti-k3-config-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: defconfig: Enable configs for DisplayPort on J721e
Link: https://lore.kernel.org/r/88cd734e-47a7-4307-c119-8f6ec6c40452@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Now that filler_t and aops->read_folio() have the same type, we can decide
which one to use at the top of the function, and cache ->read_folio in
the filler parameter.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
By making filler_t the same as read_folio, we can use the same function
for both in gfs2. We can push the use of folios down one more level
in jffs2 and nfs. We also increase type safety for future users of the
various read_cache_page() family of functions by forcing the parameter
to be a pointer to struct file (or NULL).
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
In preparation for unifying the read_cache_page() and read_folio()
implementations, make nfs_symlink_filler() get the inode
from the page instead of passing it in from read_cache_page().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
In preparation for unifying the read_cache_page() and read_folio()
implementations, make jffs2_do_readpage_unlock() get the inode
from the page instead of passing it in from read_cache_page().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
With all implementations of aops->readpage converted to aops->read_folio,
we can stop checking whether it's set and remove the member from aops.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This commit is split out so it can be dropped when resolving
conflicts with Neil Brown's series to stop calling ->readpage in
the swap code.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a full conversion which should be large folio ready, although
I have not tested it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
CIFS should probably be converted to use netfs_read_folio() by someone
familiar with it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This function mostly used folios already, and only a few minor changes
were needed.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a full folio conversion; it is prepared to handle folios of
arbitrary size.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
mpage_readpage still works in terms of pages, and has not been audited
for correctness with large folios, so include an assertion that the
filesystem is not passing it large folios. Convert all the filesystems
to call mpage_read_folio() instead of mpage_readpage().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This function is NOT converted to handle large folios, so include
an assert that the filesystem isn't passing one in. Otherwise, use
the folio functions instead of the page functions, where they exist.
Convert all filesystems which use block_read_full_page().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
A straightforward conversion as iomap_readpage already worked in folios.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is straightforward because netfs already worked in terms of folios.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Convert all the ->readpage documentation to ->read_folio.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Change all the callers of ->readpage to call ->read_folio in preference,
if it exists. This is a transitional duplication, and will be removed
by the end of the series.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Fix the following coccicheck warning:
drivers/md/dm-cache-metadata.c:1512:5-6: Unneeded variable: "r".
Return "0" on line 1520.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The precision loss of reading IO start_time with jiffies_to_nsecs
instead of using a high resolution timer degrades HST path prediction
for BIO-based mpath on high load workloads.
Below, I show the utilization percentage of a 10 disk multipath with
asymmetrical disk access cost, while being exercised by a randwrite FIO
benchmark with high submission queue depth (depth=64). It is possible
to see that the HST path selection degrades heavily for high-iops in
BIO-mpath, underutilizing the slower paths way beyond expected. This
seems to be caused by the start_time truncation, which makes some IO to
seem much slower than it actually is. In this scenario ST outperforms
HST for bio-mpath, but not for mq-mpath, which already uses ktime_get_ns().
The third column shows utilization with this patch applied. It is easy
to see that now HST prediction is much closer to the ideal distribution
(calculated considering the real cost of each path).
| | ST | HST (orig) | HST(ktime) | Best |
| sdd | 0.17 | 0.20 | 0.17 | 0.18 |
| sde | 0.17 | 0.20 | 0.17 | 0.18 |
| sdf | 0.17 | 0.20 | 0.17 | 0.18 |
| sdg | 0.06 | 0.00 | 0.06 | 0.04 |
| sdh | 0.03 | 0.00 | 0.03 | 0.02 |
| sdi | 0.03 | 0.00 | 0.03 | 0.02 |
| sdj | 0.02 | 0.00 | 0.01 | 0.01 |
| sdk | 0.02 | 0.00 | 0.01 | 0.01 |
| sdl | 0.17 | 0.20 | 0.17 | 0.18 |
| sdm | 0.17 | 0.20 | 0.17 | 0.18 |
This issue was originally discussed [1] when we first merged HST, and
this patch was left as a low hanging fruit to be solved later.
Regarding the implementation, as suggested by Mike in that mail thread,
in order to avoid the overhead of ktime_get_ns for other selectors, this
patch adds a flag for the selector code to request the high-resolution
timer.
I tested this using the same benchmark used in the original HST submission.
Full test and benchmark scripts are available here:
https://people.collabora.com/~krisman/HST-BIO-MPATH/
[1] https://lore.kernel.org/lkml/85tv0am9de.fsf@collabora.com/T/
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
[snitzer: cleaned up various implementation details]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
This reverts commit e056cf4341 ("ASoC: dt-bindings: mediatek: mt8192: Add
i2s-share properties") which was merged while the property name and
definition were still being discussed. Revert the commit for now and a
follow up commit will re-add the property after it is further discussed
and reviewed.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220509185625.580811-1-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
Arnd Bergmann
Matthew Wilcox (Oracle)
Guo Zhengkui
Gabriel Krisman Bertazi
Nícolas F. R. A. Prado