aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-05-05staging: r8188eu: use ieee80211_mgmt for action categoryMartin Kaiser1-8/+2
Use the struct ieee80211_mgmt from ieee80211.h to read the action category. There's no need to parse the incoming frame ourselves. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220502200652.143665-8-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05staging: r8188eu: replace OnAction_tbl with switch-caseMartin Kaiser2-17/+10
OnAction_tbl has only three entries. It's simpler to use a switch statement instead of iterating over the table. We can then remove the table itself and struct action_handler, which was used only for the table entries. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220502200652.143665-7-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05staging: r8188eu: remove an unused category defineMartin Kaiser1-1/+0
RTW_WLAN_CATEGORY_TDLS is not used. Remove the define. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220502200652.143665-6-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05staging: r8188eu: remove action_handler stringMartin Kaiser2-4/+3
Remove the unused str component from struct action_handler and the corresponding entries in OnAction_tbl. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220502200652.143665-5-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05staging: r8188eu: remove unused action handler prototypesMartin Kaiser1-6/+0
For some action categories, we removed the handler function, but we forgot the prototypes. Remove them as well. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220502200652.143665-4-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05staging: r8188eu: action category wmm is not usedMartin Kaiser3-9/+0
The r8188eu driver does not handle the wmm action category. Remove the empty handler function, the entry in OnAction_tbl and the define for the category. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220502200652.143665-3-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05staging: r8188eu: action category ht is not usedMartin Kaiser3-9/+0
The r8188eu driver does not handle the ht action category. Remove the empty handler function, the entry in OnAction_tbl and the define for the category. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220502200652.143665-2-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05staging: vt6655: Replace unused return value of vt6655_get_current_tsfPhilipp Hortmann3-12/+10
Replace unused return value with u64 to increase readability, reduce address and dereference operators and omit pqwCurrTSF that uses CamelCase which is not accepted by checkpatch.pl Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/62c83d78627196ec0ce2f5a562cb080a1c87a05a.1651435890.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05staging: vt6655: Rename function CARDbGetCurrentTSFPhilipp Hortmann3-7/+7
The name of the function uses CamelCase which is not accepted by checkpatch.pl Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/2b92db8d67e8dd1fc85b45efe3b32d2199371190.1651435890.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05staging: vt6655: Added missing BE support in CARDbGetCurrentTSFPhilipp Hortmann1-1/+1
Added missing big-endian support in CARDbGetCurrentTSF. Reported-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/25c80e3eb889ef2e530f26b4a97a9f5fe88e01ab.1651431640.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05staging: vt6655: Replace VNSvInPortD with ioread32Philipp Hortmann5-18/+17
Replace macro VNSvInPortD with ioread32 and as it was the only user, it can now be removed. The name of macro and the arguments use CamelCase which is not accepted by checkpatch.pl Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/3945d32053898e5f9771d6f742ae118ca56943ce.1651431640.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05staging: r8188eu: Remove broken rtw_p2p_get function.Charlie Sands1-135/+1
Removes broken and unsafe rtw_p2p_get function and all of the code associated with it from the r8188eu driver. Signed-off-by: Charlie Sands <charlies256@protonmail.com> Link: https://lore.kernel.org/r/Ymy7C/A2q+VzfBhO@sckzor-linux.localdomain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05staging: r8188eu: drop redundant check in _rtw_free_mlme_privVihas Makwana1-3/+1
There's a NULL check on pmlmepriv in rtw_mlme.c:112 which makes no sense as rtw_free_mlme_priv_ie_data() dereferences it unconditionally and it would have already crashed at this point. Remove this redundant check. Signed-off-by: Vihas Makwana <makvihas@gmail.com> Link: https://lore.kernel.org/r/20220427165748.10584-1-makvihas@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05staging: r8188eu: remove unused else conditionJaehee Park1-3/+0
rtw_select_and_join_from_scanned_queue() cannot return '2' so this else condition is unused. Remove this unnecessary else statement. Suggested-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Jaehee Park <jhpark1013@gmail.com> Link: https://lore.kernel.org/r/20220427153203.GA503502@jaehee-ThinkPad-X1-Extreme Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05staging: r8188eu: remove unused semaphore "allrxreturnevt"Vihas Makwana2-3/+0
The semaphore allrxreturnevt of struct recv_priv is initialized but not used anywhere in the code. Remove the initialization and the structure member. Signed-off-by: Vihas Makwana <makvihas@gmail.com> Link: https://lore.kernel.org/r/20220427190054.17841-1-makvihas@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05staging: greybus: correct typo in commentNickalas Cason1-1/+1
Correct misspelling in comment. Issue found with checkpatch. Signed-off-by: Nickalas Cason <nickalas@cason.dev> Link: https://lore.kernel.org/r/20220430230139.7i772mvejlhevamn@desktop Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05staging: vc04_services: Re-use generic struct s32_fractAndy Shevchenko6-49/+46
Instead of custom data type re-use generic struct s32_fract. No changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220504092915.72021-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05fsl_lpuart: Don't enable interrupts too earlyIndan Zupancic1-9/+9
If an irq is pending when devm_request_irq() is called, the irq handler will cause a NULL pointer access because initialisation is not done yet. Fixes: 9d7ee0e28da59 ("tty: serial: lpuart: avoid report NULL interrupt") Cc: stable <stable@vger.kernel.org> Signed-off-by: Indan Zupancic <Indan.Zupancic@mep-info.com> Link: https://lore.kernel.org/r/20220505114750.45423-1-Indan.Zupancic@mep-info.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05tty: n_gsm: fix invalid gsmtty_write_room() resultDaniel Starke1-4/+3
gsmtty_write() does not prevent the user to use the full fifo size of 4096 bytes as allocated in gsm_dlci_alloc(). However, gsmtty_write_room() tries to limit the return value by 'TX_SIZE' and returns a negative value if the fifo has more than 'TX_SIZE' bytes stored. This is obviously wrong as 'TX_SIZE' is defined as 512. Define 'TX_SIZE' to the fifo size and use it accordingly for allocation to keep the current behavior. Return the correct remaining size of the fifo in gsmtty_write_room() via kfifo_avail(). Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220504081733.3494-3-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05tty: n_gsm: fix mux activation issues in gsm_config()Daniel Starke1-4/+8
The current implementation activates the mux if it was restarted and opens the control channel if the mux was previously closed and we are now acting as initiator instead of responder, which is the default setting. This has two issues. 1) No mux is activated if we keep all default values and only switch to initiator. The control channel is not allocated but will be opened next which results in a NULL pointer dereference. 2) Switching the configuration after it was once configured while keeping the initiator value the same will not reopen the control channel if it was closed due to parameter incompatibilities. The mux remains dead. Fix 1) by always activating the mux if it is dead after configuration. Fix 2) by always opening the control channel after mux activation. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220504081733.3494-2-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05tty: n_gsm: fix buffer over-read in gsm_dlci_data()Daniel Starke1-0/+1
'len' is decreased after each octet that has its EA bit set to 0, which means that the value is encoded with additional octets. However, the final octet does not decreases 'len' which results in 'len' being one byte too long. A buffer over-read may occur in tty_insert_flip_string() as it tries to read one byte more than the passed content size of 'data'. Decrease 'len' also for the final octet which has the EA bit set to 1 to write the correct number of bytes from the internal receive buffer to the virtual tty. Fixes: 2e124b4a390c ("TTY: switch tty_flip_buffer_push") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220504081733.3494-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: 8250_mtk: Fix register address for XON/XOFF characterAngeloGioacchino Del Regno1-2/+5
The XON1/XOFF1 character registers are at offset 0xa0 and 0xa8 respectively, so we cannot use the definition in serial_port.h. Fixes: bdbd0a7f8f03 ("serial: 8250-mtk: modify baudrate setting") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220427132328.228297-4-angelogioacchino.delregno@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: 8250_mtk: Make sure to select the right FEATURE_SELAngeloGioacchino Del Regno1-0/+7
Set the FEATURE_SEL at probe time to make sure that BIT(0) is enabled: this guarantees that when the port is configured as AP UART, the right register layout is interpreted by the UART IP. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220427132328.228297-3-angelogioacchino.delregno@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: 8250_mtk: Fix UART_EFR register addressAngeloGioacchino Del Regno1-7/+8
On MediaTek SoCs, the UART IP is 16550A compatible, but there are some specific quirks: we are declaring a register shift of 2, but this is only valid for the majority of the registers, as there are some that are out of the standard layout. Specifically, this driver is using definitions from serial_reg.h, where we have a UART_EFR register defined as 2: this results in a 0x8 offset, but there we have the FCR register instead. The right offset for the EFR register on MediaTek UART is at 0x98, so, following the decimal definition convention in serial_reg.h and accounting for the register left shift of two, add and use the correct register address for this IP, defined as decimal 38, so that the final calculation results in (0x26 << 2) = 0x98. Fixes: bdbd0a7f8f03 ("serial: 8250-mtk: modify baudrate setting") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220427132328.228297-2-angelogioacchino.delregno@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()Yang Yingliang1-3/+2
It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code. Fixes: 5930cb3511df ("serial: driver for Conexant Digicolor USART") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Baruch Siach <baruch@tkos.co.il> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220505124621.1592697-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05drm/amd/pm: pp_dpm_sclk change for smu_v13_0_7Kenneth Feng1-5/+2
fetch the average gfxclk according to pmfw for smu_v13_0_7 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/pm: enable gfx pcc and soc cg on smu_v13_0_7Kenneth Feng1-0/+2
enable gfx pcc and soc cg on smu_v13_0_7 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/pm: enable gfx ds for smu_v13_0_7Kenneth Feng1-0/+3
enable gfx ds for smu_v13_0_7 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/soc21: enable mmhub and athub power gatingKenneth Feng1-1/+3
add the pg_flag for athub and mmhub pg. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/pm: add the pg_flag for athub and mmhub pg on smu_v13_0_7Kenneth Feng1-1/+3
add the pg_flag for athub and mmhub pg on smu_v13_0_7 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/pm: port the fan interface to smu_v13_0_7Kenneth Feng1-0/+48
port the fan interface to smu_v13_0_7 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/pm: enable pp_dpm_vclk/dclk interface for smu_v13_0_7Kenneth Feng1-2/+4
enable pp_dpm_vclk/dclk interface for smu_v13_0_7 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/pm:add UMD Pstate clock settings for smu_v13_0_7Kenneth Feng1-0/+52
add UMD Pstate clock settings for smu_v13_0_7 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/pm: pp_dpm_* interface for smu_v13_0_7Kenneth Feng1-13/+743
add the sysfs pp_dpm_* interface for smu_v13_0_7 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/pm: update the features for smu_v13_0_7Kenneth Feng1-0/+7
Enable socclk ds, dstate, mp0clk ds, mpioclk ds, gfxclk ss, memory temperature reading, athub and mmhub pg. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/pm: add SCPM support in smu v13_0_7Kenneth Feng2-6/+38
port the SCPM change from smu_v13_0_0 to smu_v13_0_7 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/pm: enable platform features for smu_v13_0_7Kenneth Feng1-0/+5
enable throttler, AC/DC, VR hot, FW CTF, fan control for smu_v13_0_7 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Wang Yang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/pm: enable fclk,vcn ds and df cstate for smu_v13_0_7Kenneth Feng1-0/+3
enable fclk ds, vcn ds and df cstate for smu_v13_0_7 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/pm: enable mp0,vcn,dcn dpm on smu_v13_0_7Kenneth Feng1-0/+6
enable mp0 dpm, vcn dpm, dcn dpm on smu_v13_0_7 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/pm: enable link dpm and link ds on smu_v13_0_7Kenneth Feng1-0/+5
enable link clock dpm and link clock deep sleep on smu_v13_0_7 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/pm: add mvdd and vddio scaling in smu_v13_0_7Kenneth Feng1-0/+2
add mvdd and vddio scaling in smu_v13_0_7 to follow uclk dpm Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/pm: add features to smu_v13_0_7Kenneth Feng1-1/+9
add prefetcher, socclk dpm, fclk dpm, uclk dpm to smu_v13_0_7 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/pm: support power on/off vcn/jpeg in smu v13_0_7Kenneth Feng1-0/+6
add power on/off vcn&jpeg callbacks in smu_v13_0_7 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/pm: add get enable mask function for smu v13_0_7Likun Gao1-0/+1
Add get_enabled_mask interface for smu v13_0_7. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/pm: add SMU_13_0_7 ppt_funcs for SMU_13_0_7Chengming Gui6-1/+510
Add initial support for SMU 13.0.7. V2: unify ppt name, fix copyright format, add missing break (Kenneth/Evan) V3: Split PMFW headers as separate patch (Alex) Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amdgpu/swsmu: add smu 13.0.7 firmwareChengming Gui1-0/+1
Declare smu 13.0.7 firmware. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amd/pm: add SMU_13_0_7 PMFW headersChengming Gui3-0/+1896
Add driver_if/ppsmc/pptable head files. Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amdgpu: enable cgcg and cgls for GC 11_0_2Likun Gao1-0/+2
Enable GFX CGCG and CGLS for GFX v11_0_2. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amdgpu/discovery: set family for GC 11.0.2Flora Cui1-0/+1
Set AMDGPU_FAMILY_GC_11_0_0. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Flora Cui <flora.cui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-05drm/amdgpu/discovery: add gfx11 support for GC 11.0.2Flora Cui1-0/+1
Enable gfx11 support. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Flora Cui <flora.cui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.