| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There is a header for a DB9 serial port, but any attempts to use
hardware handshaking fail. Enable RTS and CTS pin muxing and enable
handshaking in the uart node.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
There is a header for a DB9 serial port, but any attempts to use
hardware handshaking fail. Enable RTS and CTS pin muxing and enable
handshaking in the uart node.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The I2C2 has SMBus device SMSC USB2514Bi connected to it, the device is
capable of up to 100 kHz operation. Reduce the bus frequency to 100 kHz
to guarantee this I2C device can work correctly.
Fixes: 583f24ae42a07 ("arm64: dts: imx8mm: Add support for Data Modul i.MX8M Mini eDM SBC")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: NXP Linux Team <linux-imx@nxp.com>
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The USB2 port has USB Hub permanently connected to it, disable OC
to avoid getting false OC indication.
Fixes: 583f24ae42a07 ("arm64: dts: imx8mm: Add support for Data Modul i.MX8M Mini eDM SBC")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: NXP Linux Team <linux-imx@nxp.com>
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The CPLD on MX8Menlo board is used to operate custom hardware,
the CPLD content is compatible with previous M53Menlo CPLD,
add the bindings.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: devicetree@vger.kernel.org
To: linux-arm-kernel@lists.infradead.org
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Vladimir Oltean says:
====================
Ocelot VCAP cleanups
This is a series of minor code cleanups brought to the Ocelot switch
driver logic for VCAP filters.
- don't use list_for_each_safe() in ocelot_vcap_filter_add_to_block
- don't use magic numbers for OCELOT_POLICER_DISCARD
====================
Link: https://lore.kernel.org/r/20220503120150.837233-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
OCELOT_POLICER_DISCARD helps "kill dropped packets dead" since a
PERMIT/DENY mask mode with a port mask of 0 isn't enough to stop the CPU
port from receiving packets removed from the forwarding path.
The hardcoded initialization done for it in ocelot_vcap_init() is
confusing. All we need from it is to have a rate and a burst size of 0.
Reuse qos_policer_conf_set() for that purpose.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "port" argument is used for nothing else except printing on the
error path. Print errors on behalf of the policer index, which is less
confusing anyway.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unify the code paths for adding to an empty list and to a list with
elements by keeping a "pos" list_head element that indicates where to
insert. Initialize "pos" with the list head itself in case
list_for_each_entry() doesn't iterate over any element.
Note that list_for_each_safe() isn't needed because no element is
removed from the list while iterating.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This makes no functional difference but helps in minimizing the delta
for a future change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
list_add(..., pos->prev) and list_add_tail(..., pos) are equivalent, use
the later form to unify with the case where the list is empty later.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit 4fdabd509df3 ("dt-bindings: net: lan966x: remove PHY reset")
the PHY reset was removed, but I failed to remove it from the example.
Fix it.
Fixes: 4fdabd509df3 ("dt-bindings: net: lan966x: remove PHY reset")
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220503132038.2714128-1-michael@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As discussed here with Ido Schimmel:
https://patchwork.kernel.org/project/netdevbpf/patch/20220224102908.5255-2-jianbol@nvidia.com/
the default conform-exceed action is "reclassify", for a reason we don't
really understand.
The point is that hardware can't offload that police action, so not
specifying "conform-exceed" was always wrong, even though the command
used to work in hardware (but not in software) until the kernel started
adding validation for it.
Fix the command used by the selftest by making the policer drop on
exceed, and pass the packet to the next action (goto) on conform.
Fixes: 8cd6b020b644 ("selftests: ocelot: add some example VCAP IS1, IS2 and ES0 tc offloads")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220503121428.842906-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add toradex,colibri-imx6ull for carrier board dts,
including aster, iris and iris-v2 device tree,
wifi and nonwifi variants for NAND and eMMC modules.
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add a label for the cpu node, so that board devicetree files can
reference to the CPU node.
This is useful for describing a PMIC voltage that supplies the CPU
voltage.
For example:
&cpu0 {
cpu-supply = <&sw1_reg>;
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Willy Tarreau says:
====================
insufficient TCP source port randomness
In a not-yet published paper, Moshe Kol, Amit Klein, and Yossi Gilad
report being able to accurately identify a client by forcing it to emit
only 40 times more connections than the number of entries in the
table_perturb[] table, which is indexed by hashing the connection tuple.
The current 2^8 setting allows them to perform that attack with only 10k
connections, which is not hard to achieve in a few seconds.
Eric, Amit and I have been working on this for a few weeks now imagining,
testing and eliminating a number of approaches that Amit and his team were
still able to break or that were found to be too risky or too expensive,
and ended up with the simple improvements in this series that resists to
the attack, doesn't degrade the performance, and preserves a reliable port
selection algorithm to avoid connection failures, including the odd/even
port selection preference that allows bind() to always find a port quickly
even under strong connect() stress.
The approach relies on several factors:
- resalting the hash secret that's used to choose the table_perturb[]
entry every 10 seconds to eliminate slow attacks and force the
attacker to forget everything that was learned after this delay.
This already eliminates most of the problem because if a client
stays silent for more than 10 seconds there's no link between the
previous and the next patterns, and 10s isn't yet frequent enough
to cause too frequent repetition of a same port that may induce a
connection failure ;
- adding small random increments to the source port. Previously, a
random 0 or 1 was added every 16 ports. Now a random 0 to 7 is
added after each port. This means that with the default 32768-60999
range, a worst case rollover happens after 1764 connections, and
an average of 3137. This doesn't stop statistical attacks but
requires significantly more iterations of the same attack to
confirm a guess.
- increasing the table_perturb[] size from 2^8 to 2^16, which Amit
says will require 2.6 million connections to be attacked with the
changes above, making it pointless to get a fingerprint that will
only last 10 seconds. Due to the size, the table was made dynamic.
- a few minor improvements on the bits used from the hash, to eliminate
some unfortunate correlations that may possibly have been exploited
to design future attack models.
These changes were tested under the most extreme conditions, up to
1.1 million connections per second to one and a few targets, showing no
performance regression, and only 2 connection failures within 13 billion,
which is less than 2^-32 and perfectly within usual values.
The series is split into small reviewable changes and was already reviewed
by Amit and Eric.
====================
Link: https://lore.kernel.org/r/20220502084614.24123-1-w@1wt.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit 190cc82489f4 ("tcp: change source port randomizarion at
connect() time"), the table_perturb[] array was introduced and an
index was taken from the port_offset via hash_32(). But it turns
out that hash_32() performs a multiplication while the input here
comes from the output of SipHash in secure_seq, that is well
distributed enough to avoid the need for yet another hash.
Suggested-by: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Moshe Kol, Amit Klein, and Yossi Gilad reported being able to accurately
identify a client by forcing it to emit only 40 times more connections
than there are entries in the table_perturb[] table. The previous two
improvements consisting in resalting the secret every 10s and adding
randomness to each port selection only slightly improved the situation,
and the current value of 2^8 was too small as it's not very difficult
to make a client emit 10k connections in less than 10 seconds.
Thus we're increasing the perturb table from 2^8 to 2^16 so that the
same precision now requires 2.6M connections, which is more difficult in
this time frame and harder to hide as a background activity. The impact
is that the table now uses 256 kB instead of 1 kB, which could mostly
affect devices making frequent outgoing connections. However such
components usually target a small set of destinations (load balancers,
database clients, perf assessment tools), and in practice only a few
entries will be visited, like before.
A live test at 1 million connections per second showed no performance
difference from the previous value.
Reported-by: Moshe Kol <moshe.kol@mail.huji.ac.il>
Reported-by: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Reported-by: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We'll need to further increase the size of this table and it's likely
that at some point its size will not be suitable anymore for a static
table. Let's allocate it on boot from inet_hashinfo2_init(), which is
called from tcp_init().
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Here we're randomly adding between 0 and 7 random increments to the
selected source port in order to add some noise in the source port
selection that will make the next port less predictable.
With the default port range of 32768-60999 this means a worst case
reuse scenario of 14116/8=1764 connections between two consecutive
uses of the same port, with an average of 14116/4.5=3137. This code
was stressed at more than 800000 connections per second to a fixed
target with all connections closed by the client using RSTs (worst
condition) and only 2 connections failed among 13 billion, despite
the hash being reseeded every 10 seconds, indicating a perfectly
safe situation.
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to limit the ability for an observer to recognize the source
ports sequence used to contact a set of destinations, we should
periodically shuffle the secret. 10 seconds looks effective enough
without causing particular issues.
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Amit Klein suggests that we use different parts of port_offset for the
table's index and the port offset so that there is no direct relation
between them.
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit
7cd23e5300c1 ("secure_seq: use SipHash in place of MD5"), but the output
remained truncated to 32-bit only. In order to exploit more bits from the
hash, let's make the functions return the full 64-bit of siphash_3u32().
We also make sure the port offset calculation in __inet_hash_connect()
remains done on 32-bit to avoid the need for div_u64_rem() and an extra
cost on 32-bit systems.
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
imx8mn-evk has a WM8524 codec.
Enable the WM8524 codec driver so that audio can be functional
on this board.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Creating a new netdevice allocates at least ~50Kb of memory for various
kernel objects, but only ~5Kb of them are accounted to memcg. As a result,
creating an unlimited number of netdevice inside a memcg-limited container
does not fall within memcg restrictions, consumes a significant part
of the host's memory, can cause global OOM and lead to random kills of
host processes.
The main consumers of non-accounted memory are:
~10Kb 80+ kernfs nodes
~6Kb ipv6_add_dev() allocations
6Kb __register_sysctl_table() allocations
4Kb neigh_sysctl_register() allocations
4Kb __devinet_sysctl_register() allocations
4Kb __addrconf_sysctl_register() allocations
Accounting of these objects allows to increase the share of memcg-related
memory up to 60-70% (~38Kb accounted vs ~54Kb total for dummy netdevice
on typical VM with default Fedora 35 kernel) and this should be enough
to somehow protect the host from misuse inside container.
Other related objects are quite small and may not be taken into account
to minimize the expected performance degradation.
It should be separately mentonied ~300 bytes of percpu allocation
of struct ipstats_mib in snmp6_alloc_dev(), on huge multi-cpu nodes
it can become the main consumer of memory.
This patch does not enables kernfs accounting as it affects
other parts of the kernel and should be discussed separately.
However, even without kernfs, this patch significantly improves the
current situation and allows to take into account more than half
of all netdevice allocations.
Signed-off-by: Vasily Averin <vvs@openvz.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/354a0a5f-9ec3-a25c-3215-304eab2157bc@openvz.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The usage of the 'fsl,uart-has-rtscts' property is deprecated.
Use the standard 'uart-has-rtscts' instead.
Cc: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-By: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The usage of the 'fsl,uart-has-rtscts' property is deprecated.
Use the standard 'uart-has-rtscts' instead.
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The usage of the 'fsl,uart-has-rtscts' property is deprecated.
Use the standard 'uart-has-rtscts' instead.
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The usage of the 'fsl,uart-has-rtscts' property is deprecated.
Use the standard 'uart-has-rtscts' instead.
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The following W=1 dtc warning is seen:
arch/arm/boot/dts/mba6ulx.dtsi:33.26-64.4: Warning (avoid_unnecessary_addr_size): /gpio-keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Remove the unnecessary #address-cells/#size-cells to fix it.
Fixes: 7b8861d8e627 ("ARM: dts: imx6ul: add TQ-Systems MBa6ULx device trees")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add a DT node for the MEDIA_BLK_CTRL, which provides power domains for
the camera and display devices.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the power domains related to the MEDIAMIX to the GPC.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This adds the GPC and HSIO blk-ctrl nodes providing power control for
the high-speed (USB and PCIe) IOs.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This adds driver support for the HDMI blk-ctrl found on the
i.MX8MP SoC.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the description for the i.MX8MP media blk-ctrl.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de> # MX8MP LCDIF #1 and #2
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The i.MX8MP added some blk-ctrl peripherals that don't follow the regular
structure of the blk-ctrls in the previous SoCs. Add a new file for those
with currently only the HSIO blk-ctrl being supported. Others will be added
later on.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
|
|
i.Core MX8M Plus is an EDIMM SoM based on NXP i.MX8M Plus from Engicam.
EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation
Board from Engicam.
i.Core MX8M Plus needs to mount on top of this Evaluation board for
creating complete i.Core MX8M Plus EDIMM2.2 Starter Kit.
Add bindings for it.
Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the board ls1021a-iot in the binding docuemnt.
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add DT compatible string for board based on the Toradex Verdin iMX8M
Mini SoM, the MX8Menlo. The board is a compatible replacement for
i.MX53 M53Menlo and features USB, multiple UARTs, ethernet, LEDs,
SD and eMMC.
Acked-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Francesco Dolcini <francesco.dolcini@toradex.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: devicetree@vger.kernel.org
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add DT compatible string for i.MX8M Plus based Gateworks GW74xx board.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This eval board features an IMX8MN UltraLite and has DDR3L RAM. The
product part number is 8MNANOD3L-EVK.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add bindings for Aster, Iris and Iris V2 carrier boards our
Colibri iMX6S/DL may be mated with.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The dedicated device tree for V1.1 modules has been dropped. Remove
its bindings too.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add toradex,verdin-imx8mp for the Verdin iMX8M Plus modules, its nonwifi
and wifi variants and the carrier boards (both Dahlia and the Verdin
Development Board) they may be mated in.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add comment regarding the i.MX53 based Menlo board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: devicetree@vger.kernel.org
To: linux-arm-kernel@lists.infradead.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This adds the defines for the power domains provided by the HDMI
blk-ctrl on the i.MX8MP.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add devicetree bindings for phyGATE Tauri board with phyCORE-i.MX6 ULL.
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The i.MX8MP Media Block Control (MEDIA BLK_CTRL) is a top-level
peripheral providing access to the NoC and ensuring proper power
sequencing of the peripherals within the MEDIAMIX domain. Add DT
bindings for it.
There is already a driver for block controls of other SoCs in the i.MX8M
family, so these bindings will expand upon that.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
TQMa6ULx is a SOM family using NXP i.MX6UL CPU family.
TQMa6ULLx is a SOM family using NXP i.MX6ULL CPU family.
Both are available as a socket type as well as an LGA type.
For both variants there are the mainboards MBa6ULx and MBa6ULxL, trailing
'L' is LGA version.
Finally there is the possibility to use the socket module with an LGA
adapter on the MBa6ULxL.
The SOM needs a mainboard, therefore we provide compatibles using this
naming schema:
"tq,imx6ul-<SOM>" for the module and
"tq,imx6ul-<SOM>-<SBC>" for when mounted on the mainboard.
The i.MX6ULL version is done similar.
Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
Adam Ford
Marek Vasut
Jakub Kicinski
Vladimir Oltean
Michael Walle
Denys Drozdov
Fabio Estevam
Willy Tarreau
Eric Dumazet
Fabio Estevam
Vasily Averin
Paul Elder
Laurent Pinchart
Lucas Stach
Shawn Guo
Manoj Sai
Changming Huang
Tim Harvey
Max Krummenacher
Marcel Ziswiler
Andrej Picej
Matthias Schiffer