aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-05-04MAINTAINERS: Add HTE SubsystemDipen Patel1-0/+8
Add myself as a maintainer for this new Hardware Timestamping Engine (HTE) subsystem. Signed-off-by: Dipen Patel <dipenp@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-05-04hte: Add Tegra HTE test driverDipen Patel3-1/+247
The test driver uses IRQ and GPIO lines to timestamp using HTE subsystem. The patch also adds compilation support in Kconfig and Makefile. Signed-off-by: Dipen Patel <dipenp@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-05-04tools: gpio: Add new hardware clock typeDipen Patel1-1/+5
gpiolib-cdev is extended to support hardware clock type, this patch reflects that fact. Signed-off-by: Dipen Patel <dipenp@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-05-04gpiolib: cdev: Add hardware timestamp clock typeDipen Patel2-33/+222
This patch adds new clock type for the GPIO controller which can timestamp gpio lines in using hardware means. To expose such functionalities to the userspace, code has been added where during line create or set config API calls, it checks for new clock type and if requested, calls HTE API. During line change event, the HTE subsystem pushes timestamp data to userspace through gpiolib-cdev. Signed-off-by: Dipen Patel <dipenp@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-05-04gpio: tegra186: Add HTE supportDipen Patel1-1/+80
Tegra194 AON GPIO controller with the use of its internal hardware timestamping engine (HTE), also known as GTE, can timestamp GPIO lines through system counter. This patch implements enable/disable callbacks for the GPIO controller. In enable call, it will set timestamp function bit and GPIO line rising/falling edges in the config register. In disable call, it restores the state. Signed-off-by: Dipen Patel <dipenp@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-05-04gpiolib: Add HTE supportDipen Patel4-2/+83
Some GPIO chip can provide hardware timestamp support on its GPIO lines , in order to support that, additional API needs to be added which can talk to both GPIO chip and HTE (hardware timestamping engine) providers if there is any dependencies. This patch introduces optional hooks to enable and disable hardware timestamping related features in the GPIO controller chip. Signed-off-by: Dipen Patel <dipenp@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-05-04dt-bindings: Add HTE bindingsDipen Patel3-0/+156
Introduces HTE devicetree binding details for the HTE subsystem. It includes examples for the consumers, binding details for the providers and specific binding details for the Tegra194 based HTE providers. Signed-off-by: Dipen Patel <dipenp@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-05-04hte: Add Tegra194 HTE kernel providerDipen Patel6-0/+815
Tegra194 device has multiple HTE instances also known as GTE (Generic Hardware Timestamping Engine) which can timestamp subset of SoC lines and signals. This provider driver focuses on IRQ and GPIO lines and exposes timestamping ability on those lines to the consumers through HTE subsystem. Also, with this patch, added: - documentation about this provider and its capabilities at Documentation/hte. - Compilation support in Makefile and Kconfig Signed-off-by: Dipen Patel <dipenp@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-05-04drivers: Add hardware timestamp engine (HTE) subsystemDipen Patel6-0/+1237
Some devices can timestamp system lines/signals/Buses in real-time using the hardware counter or other hardware means which can give finer granularity and help avoid jitter introduced by software timestamping. To utilize such functionality, this patchset creates HTE subsystem where devices can register themselves as providers so that the consumers devices can request specific line from the providers. The patch also adds compilation support in Makefile and menu options in Kconfig. The provider does following: - Registers chip with the framework. - Provides translation hook to convert logical line id. - Provides enable/disable, request/release callbacks. - Pushes timestamp data to HTE subsystem. The consumer does following: - Initializes line attribute. - Gets HTE timestamp descriptor. - Requests timestamp functionality. - Puts HTE timestamp descriptor. Signed-off-by: Dipen Patel <dipenp@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-05-04ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)Alexandre Torgue5-0/+376
Add a "secure" version based on SCMI of STM32 boards. Only boards provided by STMicroelectronics are concerned: -STM32MP157A-DK1 -STM32MP157C-DK2 -STM32MP157C-ED1 -STM32MP157C-EV1 Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-05-04kselftest/arm64: Fix ABI header directory locationMark Brown1-10/+1
Currently the arm64 kselftests attempt to locate the ABI headers using custom logic which doesn't work correctly in the case of out of tree builds if KBUILD_OUTPUT is not specified. Since lib.mk defines KHDR_INCLUDES with the appropriate flags we can simply remove the custom logic and use that instead. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220503231655.211346-1-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-05-04dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)Alexandre Torgue1-0/+17
Add a "secure" version based on SCMI of STM32 boards. Only boards provided by STMicroelectronics are concerned: -STM32MP157A-DK1 -STM32MP157C-DK2 -STM32MP157C-ED1 -STM32MP157C-EV1 Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Acked-by: Rob Herring <robh@kernel.org>
2022-05-04ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15Alexandre Torgue1-0/+41
Enable optee and SCMI clocks/reset protocols support. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-05-04dt-bindings: reset: stm32mp15: rename RST_SCMI defineAlexandre Torgue1-12/+12
As we only have one SCMI instance, it's not necessary to add an index to the name. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Acked-by: Rob Herring <robh@kernel.org>
2022-05-04dt-bindings: clock: stm32mp15: rename CK_SCMI defineAlexandre Torgue1-25/+21
As we only have one SCMI instance, it's not necessary to add an index to the name. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Acked-by: Rob Herring <robh@kernel.org>
2022-05-04dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure"Alexandre Torgue1-8/+34
In case of "st,stm32mp1-rcc-secure" (stm32mp1 clock driver with RCC security support hardened), "clocks" and "clock-names" describe oscillators and are required. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-05-04dt-bindings: rcc: Add optional external ethernet RX clock propertiesMarek Vasut1-0/+8
Describe optional external ethernet RX clock in the DT binding to fix dtbs_check warnings like: arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dt.yaml: rcc@50000000: 'assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks', 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Cc: Rob Herring <robh+dt@kernel.org> To: devicetree@vger.kernel.org Acked-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220410220514.21779-1-marex@denx.de Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-05-04iommu/msm: Fix an incorrect NULL check on list iteratorXiaomeng Tong1-4/+7
The bug is here: if (!iommu || iommu->dev->of_node != spec->np) { The list iterator value 'iommu' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found (in fact, it will point to a invalid structure object containing HEAD). To fix the bug, use a new value 'iter' as the list iterator, while use the old value 'iommu' as a dedicated variable to point to the found one, and remove the unneeded check for 'iommu->dev->of_node != spec->np' outside the loop. Cc: stable@vger.kernel.org Fixes: f78ebca8ff3d6 ("iommu/msm: Add support for generic master bindings") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Link: https://lore.kernel.org/r/20220501132823.12714-1-xiam0nd.tong@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04Merge branch kvm-arm64/aarch32-idreg-trap into kvmarm-master/nextMarc Zyngier6-69/+211
* kvm-arm64/aarch32-idreg-trap: : . : Add trapping/sanitising infrastructure for AArch32 systen registers, : allowing more control over what we actually expose (such as the PMU). : : Patches courtesy of Oliver and Alexandru. : . KVM: arm64: Fix new instances of 32bit ESRs KVM: arm64: Hide AArch32 PMU registers when not available KVM: arm64: Start trapping ID registers for 32 bit guests KVM: arm64: Plumb cp10 ID traps through the AArch64 sysreg handler KVM: arm64: Wire up CP15 feature registers to their AArch64 equivalents KVM: arm64: Don't write to Rt unless sys_reg emulation succeeds KVM: arm64: Return a bool from emulate_cp() Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-05-04Merge branch kvm-arm64/hyp-stack-guard into kvmarm-master/nextMarc Zyngier12-69/+220
* kvm-arm64/hyp-stack-guard: : . : Harden the EL2 stack by providing stack guards, courtesy of : Kalesh Singh. : . KVM: arm64: Symbolize the nVHE HYP addresses KVM: arm64: Detect and handle hypervisor stack overflows KVM: arm64: Add guard pages for pKVM (protected nVHE) hypervisor stack KVM: arm64: Add guard pages for KVM nVHE hypervisor stack KVM: arm64: Introduce pkvm_alloc_private_va_range() KVM: arm64: Introduce hyp_alloc_private_va_range() Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-05-04Merge branch kvm-arm64/wfxt into kvmarm-master/nextMarc Zyngier16-30/+110
* kvm-arm64/wfxt: : . : Add support for the WFET/WFIT instructions that provide the same : service as WFE/WFI, only with a timeout. : . KVM: arm64: Expose the WFXT feature to guests KVM: arm64: Offer early resume for non-blocking WFxT instructions KVM: arm64: Handle blocking WFIT instruction KVM: arm64: Introduce kvm_counter_compute_delta() helper KVM: arm64: Simplify kvm_cpu_has_pending_timer() arm64: Use WFxT for __delay() when possible arm64: Add wfet()/wfit() helpers arm64: Add HWCAP advertising FEAT_WFXT arm64: Add RV and RN fields for ESR_ELx_WFx_ISS arm64: Expand ESR_ELx_WFx_ISS_TI to match its ARMv8.7 definition Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-05-04iommu/mediatek: Add mt8186 iommu supportYong Wu1-0/+16
Add mt8186 iommu supports. Signed-off-by: Anan Sun <anan.sun@mediatek.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220503071427.2285-37-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: mt8195: Enable multi banks for infra iommuYong Wu1-2/+5
Enable the multi-bank functions for infra-iommu. We put PCIE in bank0 and USB in the last bank(bank4). and we don't use the other banks currently, disable them. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-36-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Backup/restore regsiters for multi banksYong Wu1-15/+31
Each bank has some independent registers. thus backup/restore them for each a bank when suspend and resume. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-35-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Initialise/Remove for multi bank devYong Wu1-14/+30
The registers for each bank of the IOMMU base are in order, delta is 0x1000. Initialise the base for each bank. For all the previous SoC, we only have bank0. thus use "do {} while()" to allow bank0 always go. When removing the device, Not always all the banks are initialised, it depend on if there is masters for that bank. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-34-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Get the proper bankid for multi banksYong Wu1-7/+48
We preassign some ports in a special bank via the new defined banks_portmsk. Put it in the plat_data means it is not expected to be adjusted dynamically. If the iommu id in the iommu consumer's dtsi node is inside this banks_portmsk, then we switch it to this special iommu bank, and initialise the IOMMU bank HW. Each bank has the independent pgtable(4GB iova range). Each bank is a independent iommu domain/group. Currently we don't separate different iova ranges inside a bank. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-33-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Change the domid to iova_region_idYong Wu1-23/+23
Prepare for adding bankid, also no functional change. In the previous SoC, each a iova_region is a domain; In the multi-banks case, each a bank is a domain, then the original function name "mtk_iommu_get_domain_id" is not proper. Use "iova_region_id" instead of "domain_id". Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-32-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Initialise bank HW for each a bankYong Wu1-12/+20
The mt8195 IOMMU HW max support 5 banks, and regarding the banks' registers, it looks like: ---------------------------------------- |bank0 | bank1 | bank2 | bank3 | bank4| ---------------------------------------- |global | |control| null |regs | ----------------------------------------- |bank |bank |bank |bank |bank | |regs |regs |regs |regs |regs | | | | | | | ----------------------------------------- Each bank has some special bank registers and it share bank0's global control registers. this patch initialise the bank hw with the bankid. In the hw_init, we always initialise bank0's control register since we don't know if the bank0 is initialised. Additionally, About each bank's register base, always delta 0x1000. like bank[x + 1] = bank[x] + 0x1000. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-31-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add mtk_iommu_bank_data structureYong Wu1-61/+116
Prepare for supporting multi-banks for the IOMMU HW, No functional change. Add a new structure(mtk_iommu_bank_data) for each a bank. Each a bank have the independent HW base/IRQ/tlb-range ops, and each a bank has its special iommu-domain(independent pgtable), thus, also move the domain information into it. In previous SoC, we have only one bank which could be treated as bank0( bankid always is 0 for the previous SoC). After adding this structure, the tlb operations and irq could use bank_data as parameter. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-30-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek-v1: Just rename mtk_iommu to mtk_iommu_v1Yong Wu1-108/+103
No functional change. Just rename this for readable. Differentiate this from mtk_iommu.c Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-29-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Remove mtk_iommu.hYong Wu3-36/+21
Currently there is a suspend structure in the header file. It's no need to keep a header file only for this. Move these into the c file and rm this header file. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-28-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Separate mtk_iommu_data for v1 and v2Yong Wu3-86/+106
Prepare for adding the structure "mtk_iommu_bank_data". No functional change. The mtk_iommu_domain in v1 and v2 are different, we could not add current data as bank[0] in v1 simplistically. Currently we have no plan to add new SoC for v1, in order to avoid affect v1 when we add many new features for v2, I totally separate v1 and v2 in this patch, there are many structures only for v2. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-27-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Just move code position in hw_initYong Wu1-24/+24
No functional change too, prepare for mt8195 IOMMU support bank functions. Some global control settings are in bank0 while the other banks have their bank independent setting. Here only move the global control settings and the independent registers together. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-26-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Only adjust code about register baseYong Wu1-24/+27
No functional change. Use "base" instead of the data->base. This is avoid to touch too many lines in the next patches. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-25-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add mt8195 supportYong Wu2-0/+42
mt8195 has 3 IOMMU, containing 2 MM IOMMUs, one is for vdo, the other is for vpp. and 1 INFRA IOMMU. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-24-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add PCIe supportYong Wu1-1/+20
Currently the code for of_iommu_configure_dev_id is like this: static int of_iommu_configure_dev_id(struct device_node *master_np, struct device *dev, const u32 *id) { struct of_phandle_args iommu_spec = { .args_count = 1 }; err = of_map_id(master_np, *id, "iommu-map", "iommu-map-mask", &iommu_spec.np, iommu_spec.args); ... } It supports only one id output. BUT our PCIe HW has two ID(one is for writing, the other is for reading). I'm not sure if we should change of_map_id to support output MAX_PHANDLE_ARGS. Here add the solution in ourselve drivers. If it's pcie case, enable one more bit. Not all infra iommu support PCIe, thus add a PCIe support flag here. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-23-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add infra iommu supportYong Wu2-7/+31
The infra iommu enable bits in mt8195 is in the pericfg register segment, use regmap to update it. If infra iommu master translation fault, It doesn't have the larbid/portid, thus print out the whole register value. Since regmap_update_bits may fail, add return value for mtk_iommu_config. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-22-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add a PM_CLK_AO flag for infra iommuYong Wu1-3/+26
The power/clock of infra iommu is always on, and it doesn't have the device link with the master devices, then the infra iommu device's PM status is not active, thus we add A PM_CLK_AO flag for infra iommu. The tlb operation is a bit not clear here, there are 2 special cases. Comment them in the code. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-21-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Allow IOMMU_DOMAIN_UNMANAGED for PCIe VFIOYong Wu1-1/+1
Allow the type IOMMU_DOMAIN_UNMANAGED since vfio_iommu_type1.c always call iommu_domain_alloc. The PCIe EP works ok when going through vfio. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-20-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Adjust device link when it is sub-commonYong Wu1-4/+14
For MM IOMMU, We always add device link between smi-common and IOMMU HW. In mt8195, we add smi-sub-common. Thus, if the node is sub-common, we still need find again to get smi-common, then do device link. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-19-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Contain MM IOMMU flow with the MM TYPEYong Wu1-91/+122
Prepare for supporting INFRA_IOMMU, and APU_IOMMU later. For Infra IOMMU/APU IOMMU, it doesn't have the "larb""port". thus, Use the MM flag contain the MM_IOMMU special flow, Also, it moves a big chunk code about parsing the mediatek,larbs into a function, this is only needed for MM IOMMU. and all the current SoC are MM_IOMMU. The device link between iommu consumer device and smi-larb device only is needed in MM iommu case. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-18-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add IOMMU_TYPE flagYong Wu1-2/+10
Add IOMMU_TYPE definition. In the mt8195, we have another IOMMU_TYPE: infra iommu, also there will be another APU_IOMMU, thus, use 2bits for the IOMMU_TYPE. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-17-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add SUB_COMMON_3BITS flagYong Wu2-11/+17
In prevous SoC, the sub common id occupy 2 bits. the mt8195's sub common id has 3bits. Add a new flag for this. and rename the previous flag to _2BITS. For readable, I put these two flags together, then move the other flags. no functional change. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-16-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Always enable output PA over 32bits in isrYong Wu1-2/+2
Currently the output PA[32:33] is contained by the flag IOVA_34. This is not right. the iova_34 has no relation with pa[32:33], the 32bits iova still could map to pa[32:33]. Move it out from the flag. No need fix tag since currently only mt8192 use the calulation and it always has this IOVA_34 flag. Prepare for the IOMMU that still use IOVA 32bits but its dram size may be over 4GB. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-15-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Remove the granule in the tlb flushYong Wu1-4/+2
The MediaTek IOMMU doesn't care about granule when tlb flushing. Remove this variable. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-14-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add a flag STD_AXI_MODEYong Wu1-1/+3
Add a new flag STD_AXI_MODE which is prepared for infra and apu iommu which use the standard axi mode. All the current SoC don't use this flag. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-13-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add a flag DCM_DISABLEYong Wu1-1/+8
In the infra iommu, we should disable DCM. add a new flag for this. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-12-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add 12G~16G support for multi domainsYong Wu1-3/+5
In mt8192, we preassign 0-4G; 4G-8G; 8G-12G for different multimedia engines. This depends on the "dma-ranges=" in the iommu consumer's dtsi node. Adds 12G-16G region here. and reword the previous comment. we don't limit which master locate in which region. CCU still is 8G-12G. Don't change it here. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-11-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Adapt sharing and non-sharing pgtable caseYong Wu2-20/+30
In previous mt2712, Both IOMMUs are MM IOMMU, and they will share pgtable. However in the latest SoC, another is infra IOMMU, there is no reason to share pgtable between MM with INFRA IOMMU. This patch manage to implement the two case(sharing and non-sharing pgtable). Currently we use for_each_m4u to loop the 2 HWs. Add the list_head into this macro. In the sharing pgtable case, the list_head is the global "m4ulist". In the non-sharing pgtable case, the list_head is hw_list_head which is a variable in the "data". then for_each_m4u will only loop itself. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-10-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add mutex for data in the mtk_iommu_domainYong Wu1-1/+9
Same with the previous patch, add a mutex for the "data" in the mtk_iommu_domain. Just improve the safety for multi devices enter attach_device at the same time. We don't get the real issue for this. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-9-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.