aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-05-04xfs: fix potential log item leakDave Chinner4-0/+7
Ever since we added shadown format buffers to the log items, log items need to handle the item being released with shadow buffers attached. Due to the fact this requirement was added at the same time we added new rmap/reflink intents, we missed the cleanup of those items. In theory, this means shadow buffers can be leaked in a very small window when a shutdown is initiated. Testing with KASAN shows this leak does not happen in practice - we haven't identified a single leak in several years of shutdown testing since ~v4.8 kernels. However, the intent whiteout cleanup mechanism results in every cancelled intent in exactly the same state as this tiny race window creates and so if intents down clean up shadow buffers on final release we will leak the shadow buffer for just about every intent we create. Hence we start with this patch to close this condition off and ensure that when whiteouts start to be used we don't leak lots of memory. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-04xfs: zero inode fork buffer at allocationDave Chinner1-3/+9
When we first allocate or resize an inline inode fork, we round up the allocation to 4 byte alingment to make journal alignment constraints. We don't clear the unused bytes, so we can copy up to three uninitialised bytes into the journal. Zero those bytes so we only ever copy zeros into the journal. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-03Merge branch 'bnxt_en-bug-fixes'Jakub Kicinski2-13/+15
Michael Chan says: ==================== bnxt_en: Bug fixes This patch series includes 3 fixes: - Fix an occasional VF open failure. - Fix a PTP spinlock usage before initialization - Fix unnecesary RX packet drops under high TX traffic load. ==================== Link: https://lore.kernel.org/r/1651540392-2260-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03bnxt_en: Fix unnecessary dropping of RX packetsMichael Chan1-0/+4
In bnxt_poll_p5(), we first check cpr->has_more_work. If it is true, we are in NAPI polling mode and we will call __bnxt_poll_cqs() to continue polling. It is possible to exhanust the budget again when __bnxt_poll_cqs() returns. We then enter the main while loop to check for new entries in the NQ. If we had previously exhausted the NAPI budget, we may call __bnxt_poll_work() to process an RX entry with zero budget. This will cause packets to be dropped unnecessarily, thinking that we are in the netpoll path. Fix it by breaking out of the while loop if we need to process an RX NQ entry with no budget left. We will then exit NAPI and stay in polling mode. Fixes: 389a877a3b20 ("bnxt_en: Process the NQ under NAPI continuous polling.") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03bnxt_en: Initiallize bp->ptp_lock first before using itMichael Chan1-8/+7
bnxt_ptp_init() calls bnxt_ptp_init_rtc() which will acquire the ptp_lock spinlock. The spinlock is not initialized until later. Move the bnxt_ptp_init_rtc() call after the spinlock is initialized. Fixes: 24ac1ecd5240 ("bnxt_en: Add driver support to use Real Time Counter for PTP") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03bnxt_en: Fix possible bnxt_open() failure caused by wrong RFS flagSomnath Kotur1-5/+4
bnxt_open() can fail in this code path, especially on a VF when it fails to reserve default rings: bnxt_open() __bnxt_open_nic() bnxt_clear_int_mode() bnxt_init_dflt_ring_mode() RX rings would be set to 0 when we hit this error path. It is possible for a subsequent bnxt_open() call to potentially succeed with a code path like this: bnxt_open() bnxt_hwrm_if_change() bnxt_fw_init_one() bnxt_fw_init_one_p3() bnxt_set_dflt_rfs() bnxt_rfs_capable() bnxt_hwrm_reserve_rings() On older chips, RFS is capable if we can reserve the number of vnics that is equal to RX rings + 1. But since RX rings is still set to 0 in this code path, we may mistakenly think that RFS is supported for 0 RX rings. Later, when the default RX rings are reserved and we try to enable RFS, it would fail and cause bnxt_open() to fail unnecessarily. We fix this in 2 places. bnxt_rfs_capable() will always return false if RX rings is not yet set. bnxt_init_dflt_ring_mode() will call bnxt_set_dflt_rfs() which will always clear the RFS flags if RFS is not supported. Fixes: 20d7d1c5c9b1 ("bnxt_en: reliably allocate IRQ table on reset to avoid crash") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03Merge tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-nextJakub Kicinski298-4102/+43482
Kalle Valo says: ==================== wireless-next patches for v5.19 First set of patches for v5.19 and this is a big one. We have two new drivers, a change in mac80211 STA API affecting most drivers and ath11k getting support for WCN6750. And as usual lots of fixes and cleanups all over. Major changes: new drivers - wfx: silicon labs devices - plfxlc: pureLiFi X, XL, XC devices mac80211 - host based BSS color collision detection - prepare sta handling for IEEE 802.11be Multi-Link Operation (MLO) support rtw88 - support TP-Link T2E devices rtw89 - support firmware crash simulation - preparation for 8852ce hardware support ath11k - Wake-on-WLAN support for QCA6390 and WCN6855 - device recovery (firmware restart) support for QCA6390 and WCN6855 - support setting Specific Absorption Rate (SAR) for WCN6855 - read country code from SMBIOS for WCN6855/QCA6390 - support for WCN6750 wcn36xx - support for transmit rate reporting to user space * tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (228 commits) rtw89: 8852c: rfk: add DPK rtw89: 8852c: rfk: add IQK rtw89: 8852c: rfk: add RX DCK rtw89: 8852c: rfk: add RCK rtw89: 8852c: rfk: add TSSI rtw89: 8852c: rfk: add LCK rtw89: 8852c: rfk: add DACK rtw89: 8852c: rfk: add RFK tables plfxlc: fix le16_to_cpu warning for beacon_interval rtw88: remove a copy of the NAPI_POLL_WEIGHT define carl9170: tx: fix an incorrect use of list iterator wil6210: use NAPI_POLL_WEIGHT for napi budget ath10k: remove a copy of the NAPI_POLL_WEIGHT define ath11k: Add support for WCN6750 device ath11k: Datapath changes to support WCN6750 ath11k: HAL changes to support WCN6750 ath11k: Add QMI changes for WCN6750 ath11k: Fetch device information via QMI for WCN6750 ath11k: Add register access logic for WCN6750 ath11k: Add HW params for WCN6750 ... ==================== Link: https://lore.kernel.org/r/20220503153622.C1671C385A4@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03netdev: reshuffle netif_napi_add() APIs to allow dropping weightJakub Kicinski2-20/+36
Most drivers should not have to worry about selecting the right weight for their NAPI instances and pass NAPI_POLL_WEIGHT. It'd be best if we didn't require the argument at all and selected the default internally. This change prepares the ground for such reshuffling, allowing for a smooth transition. The following API should remain after the next release cycle: netif_napi_add() netif_napi_add_weight() netif_napi_add_tx() netif_napi_add_tx_weight() Where the _weight() variants take an explicit weight argument. I opted for a _weight() suffix rather than a __ prefix, because we use __ in places to mean that caller needs to also issue a synchronize_net() call. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20220502232703.396351-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03selftests: forwarding: add basic QoS classification test for Ocelot switchesVladimir Oltean1-0/+253
Test basic (port-default, VLAN PCP and IP DSCP) QoS classification for Ocelot switches. Advanced QoS classification using tc filters is covered by tc_flower_chains.sh in the same directory. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220502155424.4098917-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03smsc911x: allow using IRQ0Sergey Shtylyov1-1/+1
The AlphaProject AP-SH4A-3A/AP-SH4AD-0A SH boards use IRQ0 for their SMSC LAN911x Ethernet chip, so the networking on them must have been broken by commit 965b2aa78fbc ("net/smsc911x: fix irq resource allocation failure") which filtered out 0 as well as the negative error codes -- it was kinda correct at the time, as platform_get_irq() could return 0 on of_irq_get() failure and on the actual 0 in an IRQ resource. This issue was fixed by me (back in 2016!), so we should be able to fix this driver to allow IRQ0 usage again... When merging this to the stable kernels, make sure you also merge commit e330b9a6bb35 ("platform: don't return 0 from platform_get_irq[_byname]() on error") -- that's my fix to platform_get_irq() for the DT platforms... Fixes: 965b2aa78fbc ("net/smsc911x: fix irq resource allocation failure") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/656036e4-6387-38df-b8a7-6ba683b16e63@omp.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03Merge branch 'mptcp-userspace-path-manager-prerequisites'Jakub Kicinski8-20/+81
Mat Martineau says: ==================== mptcp: Userspace path manager prerequisites This series builds upon the path manager mode selection changes merged in 4994d4fa99ba ("Merge branch 'mptcp-path-manager-mode-selection'") to further modify the path manager code in preparation for adding the new netlink commands to announce/remove advertised addresses and create/destroy subflows of an MPTCP connection. The third and final patch series for the userspace path manager will implement those commands as discussed in https://lore.kernel.org/netdev/23ff3b49-2563-1874-fa35-3af55d3088e7@linux.intel.com/#r Patches 1, 5, and 7 remove some internal constraints on path managers (in general) without changing in-kernel PM behavior. Patch 2 adds a self test to validate MPTCP address advertisement ack behavior. Patches 3, 4, and 6 add new attributes to existing MPTCP netlink events and track internal state for populating those attributes. ==================== Link: https://lore.kernel.org/r/20220502205237.129297-1-mathew.j.martineau@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03mptcp: allow ADD_ADDR reissuance by userspace PMsKishen Maloor1-2/+10
This change allows userspace PM implementations to reissue ADD_ADDR announcements (if necessary) based on their chosen policy. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03mptcp: expose server_side attribute in MPTCP netlink eventsKishen Maloor2-0/+4
This change records the 'server_side' attribute of MPTCP_EVENT_CREATED and MPTCP_EVENT_ESTABLISHED events to inform their recipient about the Client/Server role of the running MPTCP application. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/246 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03mptcp: establish subflows from either end of connectionKishen Maloor3-7/+8
This change updates internal logic to permit subflows to be established from either the client or server ends of MPTCP connections. This symmetry and added flexibility may be harnessed by PM implementations running on either end in creating new subflows. The essence of this change lies in not relying on the "server_side" flag (which continues to be available if needed). Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03mptcp: reflect remote port (not 0) in ANNOUNCED eventsKishen Maloor4-8/+15
Per RFC 8684, if no port is specified in an ADD_ADDR message, MPTCP SHOULD attempt to connect to the specified address on the same port as the port that is already in use by the subflow on which the ADD_ADDR signal was sent. To facilitate that, this change reflects the specific remote port in use by that subflow in MPTCP_EVENT_ANNOUNCED events. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03mptcp: store remote id from MP_JOIN SYN/ACK in local ctxKishen Maloor1-0/+1
This change reads the addr id assigned to the remote endpoint of a subflow from the MP_JOIN SYN/ACK message and stores it in the related subflow context. The remote id was not being captured prior to this change, and will now provide a consistent view of remote endpoints and their ids as seen through netlink events. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03selftests: mptcp: ADD_ADDR echo test with missing userspace daemonMat Martineau1-0/+11
Check userspace PM behavior to ensure ADD_ADDR echoes are only sent when there is an active userspace daemon. If the daemon is restarting or hasn't loaded yet, the missing echo will cause the peer to retransmit the ADD_ADDR - and hopefully the daemon will be ready to receive it at that later time. Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03mptcp: bypass in-kernel PM restrictions for non-kernel PMsKishen Maloor4-3/+32
Current limits on the # of addresses/subflows must apply only to in-kernel PM managed sockets. Thus this change removes such restrictions on connections overseen by non-kernel (e.g. userspace) PMs. This change also ensures that the kernel does not record stats inside struct mptcp_pm_data updated along kernel code paths when exercised via non-kernel PMs. Additionally, address announcements are acknolwedged and subflow requests are honored only when it's deemed that a userspace path manager is active at the time. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONTMatthew Hagan1-1/+11
As noted elsewhere, various GPON SFP modules exhibit non-standard TX-fault behaviour. In the tested case, the Huawei MA5671A, when used in combination with a Marvell mv88e6085 switch, was found to persistently assert TX-fault, resulting in the module being disabled. This patch adds a quirk to ignore the SFP_F_TX_FAULT state, allowing the module to function. Change from v1: removal of erroneous return statment (Andrew Lunn) Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220502223315.1973376-1-mnhagan88@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03Merge tag 'seccomp-v5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds1-5/+5
Pull seccomp selftest fix from Kees Cook: - Avoid using stdin for read syscall testing (Jann Horn) * tag 'seccomp-v5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests/seccomp: Don't call read() on TTY from background pgrp
2022-05-03PCI: qcom: Remove ddrss_sf_tbu clock from SC8180XBjorn Andersson1-1/+6
The Qualcomm SC8180X platform was piggy-backing on the SM8250 qcom_pcie_cfg, but SC8180X doesn't have the ddrss_sf_tbu clock, so it now fails to probe due to the missing clock. Give SC8180X its own qcom_pcie_cfg, without the ddrss_sf_tbu flag set. Fixes: 0614f98bbb9f ("PCI: qcom: Add ddrss_sf_tbu flag") Link: https://lore.kernel.org/r/20220331013415.592748-1-bjorn.andersson@linaro.org Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-05-03ipc: Remove extra bracesAlexey Gladkov1-13/+12
Fix coding style. In the previous commit, I added braces because, in addition to changing .data, .extra1 also changed. Now this is not needed. Fixes: 1f5c135ee509 ("ipc: Store ipc sysctls in the ipc namespace") Signed-off-by: Alexey Gladkov <legion@kernel.org> Link: https://lkml.kernel.org/r/37687827f630bc150210f5b8abeeb00f1336814e.1651584847.git.legion@kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2022-05-03ipc: Check permissions for checkpoint_restart sysctls at open timeAlexey Gladkov1-28/+29
As Eric Biederman pointed out, it is possible not to use a custom proc_handler and check permissions for every write, but to use a .permission handler. That will allow the checkpoint_restart sysctls to perform all of their permission checks at open time, and not need any other special code. Link: https://lore.kernel.org/lkml/87czib9g38.fsf@email.froward.int.ebiederm.org/ Fixes: 1f5c135ee509 ("ipc: Store ipc sysctls in the ipc namespace") Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Alexey Gladkov <legion@kernel.org> Link: https://lkml.kernel.org/r/65fa8459803830608da4610a39f33c76aa933eb9.1651584847.git.legion@kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2022-05-03ipc: Remove extra1 field abuse to pass ipc namespaceAlexey Gladkov1-17/+7
Eric Biederman pointed out that using .extra1 to pass ipc namespace looks like an ugly hack and there is a better solution. We can get the ipc_namespace using the .data field. Link: https://lore.kernel.org/lkml/87czib9g38.fsf@email.froward.int.ebiederm.org/ Fixes: 1f5c135ee509 ("ipc: Store ipc sysctls in the ipc namespace") Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Alexey Gladkov <legion@kernel.org> Link: https://lkml.kernel.org/r/93df64a8fe93ba20ebbe1d9f8eda484b2f325426.1651584847.git.legion@kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2022-05-03ipc: Use the same namespace to modify and validateAlexey Gladkov1-1/+1
In the 1f5c135ee509 ("ipc: Store ipc sysctls in the ipc namespace") I missed that in addition to the modification of sem_ctls[3], the change is validated. This validation must occur in the same namespace. Link: https://lore.kernel.org/lkml/875ymnvryb.fsf@email.froward.int.ebiederm.org/ Fixes: 1f5c135ee509 ("ipc: Store ipc sysctls in the ipc namespace") Signed-off-by: Alexey Gladkov <legion@kernel.org> Link: https://lkml.kernel.org/r/b3cb9a25cce6becbef77186bc1216071a08a969b.1651584847.git.legion@kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2022-05-03ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2SHIMAMOTO Takayoshi4-0/+246
Buffalo WZR-1166DHP/WZR-1166DHP2 wireless router with - BCM4708A0 - 128MiB NAND flash - 2T2R 11ac/a/b/g/n Wi-Fi - 4x 10/100/1000M ethernet switch - 1x USB 3.0 port WZR-1166DHP and WZR-1166DHP2 have different memory capacity. WZR-1166DHP - 512 MiB DDR2 SDRAM WZR-1166DHP2 - 256 MiB DDR2 SDRAM These hardware components are very similar to the WZR-1750DHP except for the number of antennas. Signed-off-by: SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-05-03dt-bindings: i3c: Convert snps,dw-i3c-master to DT schemaRob Herring2-41/+52
Convert the Synopsys Designware I3C master to DT schema format. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220422192236.2594577-1-robh@kernel.org
2022-05-03dt-bindings: i3c: Convert cdns,i3c-master to DT schemaRob Herring2-43/+60
Convert the Cadence I3C master to DT schema format. This fixes a warning as it is used in the i3c.yaml example. The "nintendo,nunchuk" is not documented by a schema, so change the example child device to something which is documented. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220422192224.2594098-1-robh@kernel.org
2022-05-03selftests/seccomp: Add test for wait killable notifierSargun Dhillon1-0/+228
This verifies that if a filter is set up with the wait killable feature that it obeys the semantics that non-fatal signals are ignored during a notification after the notification is received. Cases tested: * Non-fatal signal prior to receive * Non-fatal signal during receive * Fatal signal after receive The normal signal handling is tested in user_notification_signal. That behaviour remains unchanged. On an unsupported kernel, these tests will immediately bail as it relies on a new seccomp flag. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220503080958.20220-4-sargun@sargun.me
2022-05-03selftests/seccomp: Refactor get_proc_stat to split out file reading codeSargun Dhillon1-16/+38
This splits up the get_proc_stat function to make it so we can use it as a generic helper to read the nth field from multiple different files, versus replicating the logic in multiple places. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Cc: linux-kselftest@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220503080958.20220-3-sargun@sargun.me
2022-05-03seccomp: Add wait_killable semantic to seccomp user notifierSargun Dhillon4-3/+54
This introduces a per-filter flag (SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV) that makes it so that when notifications are received by the supervisor the notifying process will transition to wait killable semantics. Although wait killable isn't a set of semantics formally exposed to userspace, the concept is searchable. If the notifying process is signaled prior to the notification being received by the userspace agent, it will be handled as normal. One quirk about how this is handled is that the notifying process only switches to TASK_KILLABLE if it receives a wakeup from either an addfd or a signal. This is to avoid an unnecessary wakeup of the notifying task. The reasons behind switching into wait_killable only after userspace receives the notification are: * Avoiding unncessary work - Often, workloads will perform work that they may abort (request racing comes to mind). This allows for syscalls to be aborted safely prior to the notification being received by the supervisor. In this, the supervisor doesn't end up doing work that the workload does not want to complete anyways. * Avoiding side effects - We don't want the syscall to be interruptible once the supervisor starts doing work because it may not be trivial to reverse the operation. For example, unmounting a file system may take a long time, and it's hard to rollback, or treat that as reentrant. * Avoid breaking runtimes - Various runtimes do not GC when they are during a syscall (or while running native code that subsequently calls a syscall). If many notifications are blocked, and not picked up by the supervisor, this can get the application into a bad state. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220503080958.20220-2-sargun@sargun.me
2022-05-03selftests: KVM: aarch64: Add the bitmap firmware registers to get-reg-listRaghavendra Rao Ananta1-0/+8
Add the psuedo-firmware registers KVM_REG_ARM_STD_BMAP, KVM_REG_ARM_STD_HYP_BMAP, and KVM_REG_ARM_VENDOR_HYP_BMAP to the base_regs[] list. Also, add the COPROC support for KVM_REG_ARM_FW_FEAT_BMAP. Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220502233853.1233742-10-rananta@google.com
2022-05-03selftests: KVM: aarch64: Introduce hypercall ABI testRaghavendra Rao Ananta3-0/+338
Introduce a KVM selftest to check the hypercall interface for arm64 platforms. The test validates the user-space' [GET|SET]_ONE_REG interface to read/write the psuedo-firmware registers as well as its effects on the guest upon certain configurations. Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220502233853.1233742-9-rananta@google.com
2022-05-03selftests: KVM: Create helper for making SMCCC callsOliver Upton4-27/+58
The PSCI and PV stolen time tests both need to make SMCCC calls within the guest. Create a helper for making SMCCC calls and rework the existing tests to use the library function. Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220409184549.1681189-11-oupton@google.com
2022-05-03selftests: KVM: Rename psci_cpu_on_test to psci_testOliver Upton3-2/+2
There are other interactions with PSCI worth testing; rename the PSCI test to make it more generic. No functional change intended. Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220409184549.1681189-10-oupton@google.com
2022-05-03tools: Import ARM SMCCC definitionsRaghavendra Rao Ananta1-0/+193
Import the standard SMCCC definitions from include/linux/arm-smccc.h. Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220502233853.1233742-8-rananta@google.com
2022-05-03Docs: KVM: Add doc for the bitmap firmware registersRaghavendra Rao Ananta2-17/+96
Add the documentation for the bitmap firmware registers in hypercalls.rst and api.rst. This includes the details for KVM_REG_ARM_STD_BMAP, KVM_REG_ARM_STD_HYP_BMAP, and KVM_REG_ARM_VENDOR_HYP_BMAP registers. Since the document is growing to carry other hypercall related information, make necessary adjustments to present the document in a generic sense, rather than being PSCI focused. Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Gavin Shan <gshan@redhat.com> [maz: small scale reformat, move things about, random typo fixes] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220502233853.1233742-7-rananta@google.com
2022-05-03Docs: KVM: Rename psci.rst to hypercalls.rstRaghavendra Rao Ananta1-0/+0
Since the doc also covers general hypercalls' details, rather than just PSCI, and the fact that the bitmap firmware registers' details will be added to this doc, rename the file to a more appropriate name- hypercalls.rst. Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220502233853.1233742-6-rananta@google.com
2022-05-03KVM: arm64: Add vendor hypervisor firmware registerRaghavendra Rao Ananta3-5/+30
Introduce the firmware register to hold the vendor specific hypervisor service calls (owner value 6) as a bitmap. The bitmap represents the features that'll be enabled for the guest, as configured by the user-space. Currently, this includes support for KVM-vendor features along with reading the UID, represented by bit-0, and Precision Time Protocol (PTP), represented by bit-1. Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Gavin Shan <gshan@redhat.com> [maz: tidy-up bitmap values] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220502233853.1233742-5-rananta@google.com
2022-05-03KVM: arm64: Add standard hypervisor firmware registerRaghavendra Rao Ananta3-3/+29
Introduce the firmware register to hold the standard hypervisor service calls (owner value 5) as a bitmap. The bitmap represents the features that'll be enabled for the guest, as configured by the user-space. Currently, this includes support only for Paravirtualized time, represented by bit-0. Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Gavin Shan <gshan@redhat.com> [maz: tidy-up bitmap values] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220502233853.1233742-4-rananta@google.com
2022-05-03KVM: arm64: Setup a framework for hypercall bitmap firmware registersRaghavendra Rao Ananta6-2/+137
KVM regularly introduces new hypercall services to the guests without any consent from the userspace. This means, the guests can observe hypercall services in and out as they migrate across various host kernel versions. This could be a major problem if the guest discovered a hypercall, started using it, and after getting migrated to an older kernel realizes that it's no longer available. Depending on how the guest handles the change, there's a potential chance that the guest would just panic. As a result, there's a need for the userspace to elect the services that it wishes the guest to discover. It can elect these services based on the kernels spread across its (migration) fleet. To remedy this, extend the existing firmware pseudo-registers, such as KVM_REG_ARM_PSCI_VERSION, but by creating a new COPROC register space for all the hypercall services available. These firmware registers are categorized based on the service call owners, but unlike the existing firmware pseudo-registers, they hold the features supported in the form of a bitmap. During the VM initialization, the registers are set to upper-limit of the features supported by the corresponding registers. It's expected that the VMMs discover the features provided by each register via GET_ONE_REG, and write back the desired values using SET_ONE_REG. KVM allows this modification only until the VM has started. Some of the standard features are not mapped to any bits of the registers. But since they can recreate the original problem of making it available without userspace's consent, they need to be explicitly added to the case-list in kvm_hvc_call_default_allowed(). Any function-id that's not enabled via the bitmap, or not listed in kvm_hvc_call_default_allowed, will be returned as SMCCC_RET_NOT_SUPPORTED to the guest. Older userspace code can simply ignore the feature and the hypercall services will be exposed unconditionally to the guests, thus ensuring backward compatibility. In this patch, the framework adds the register only for ARM's standard secure services (owner value 4). Currently, this includes support only for ARM True Random Number Generator (TRNG) service, with bit-0 of the register representing mandatory features of v1.0. Other services are momentarily added in the upcoming patches. Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Gavin Shan <gshan@redhat.com> [maz: reduced the scope of some helpers, tidy-up bitmap max values, dropped error-only fast path] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220502233853.1233742-3-rananta@google.com
2022-05-03selinux: log anon inode class nameChristian Göttsche3-2/+7
Log the anonymous inode class name in the security hook inode_init_security_anon. This name is the key for name based type transitions on the anon_inode security class on creation. Example: type=AVC msg=audit(02/16/22 22:02:50.585:216) : avc: granted \ { create } for pid=2136 comm=mariadbd anonclass=[io_uring] \ scontext=system_u:system_r:mysqld_t:s0 \ tcontext=system_u:system_r:mysqld_iouring_t:s0 tclass=anon_inode Add a new LSM audit data type holding the inode and the class name. Signed-off-by: Christian Göttsche <cgzones@googlemail.com> [PM: adjusted 'anonclass' to be a trusted string, cgzones approved] Signed-off-by: Paul Moore <paul@paul-moore.com>
2022-05-03selinux: declare data arrays constChristian Göttsche11-58/+71
The arrays for the policy capability names, the initial sid identifiers and the class and permission names are not changed at runtime. Declare them const to avoid accidental modification. Do not override the classmap and the initial sid list in the build time script genheaders. Check flose(3) is successful in genheaders.c, otherwise the written data might be corrupted or incomplete. Signed-off-by: Christian Göttsche <cgzones@googlemail.com> [PM: manual merge due to fuzz, minor style tweaks] Signed-off-by: Paul Moore <paul@paul-moore.com>
2022-05-03interconnect: Restore sync state by ignoring ipa-virt in provider countStephen Boyd1-1/+7
Ignore compatible strings for the IPA virt drivers that were removed in commits 2fb251c26560 ("interconnect: qcom: sdx55: Drop IP0 interconnects") and 2f3724930eb4 ("interconnect: qcom: sc7180: Drop IP0 interconnects") so that the sync state logic can kick in again. Otherwise all the interconnects in the system will stay pegged at max speeds because 'providers_count' is always going to be one larger than the number of drivers that will ever probe on sc7180 or sdx55. This fixes suspend on sc7180 and sdx55 devices when you don't have a devicetree patch to remove the ipa-virt compatible node. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Doug Anderson <dianders@chromium.org> Cc: Alex Elder <elder@linaro.org> Cc: Taniya Das <quic_tdas@quicinc.com> Cc: Mike Tipton <quic_mdtipton@quicinc.com> Fixes: 2fb251c26560 ("interconnect: qcom: sdx55: Drop IP0 interconnects") Fixes: 2f3724930eb4 ("interconnect: qcom: sc7180: Drop IP0 interconnects") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20220427013226.341209-1-swboyd@chromium.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2022-05-03ARM: dts: qcom: msm8974-FP2: Add supplies for remoteprocsLuca Weiss1-0/+11
Those were removed from msm8974.dtsi as part of a recent cleanup commit, so add them back for FP2. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220421214243.352469-3-luca@z3ntu.xyz
2022-05-03ARM: dts: qcom: msm8974-FP2: Configure chargerLuca Weiss1-0/+10
Set the relevant properties on the smbb charger to allow the device to charge properly. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220421214243.352469-2-luca@z3ntu.xyz
2022-05-03ARM: dts: qcom: msm8974-FP2: Add support for touchscreenLuca Weiss1-0/+15
Configure the touchscreen found on the new display module of the FP2. To add some detail, FP2 has two different screen/touchscreen variants ("display module"), the old module has Synaptics touchscreen, the new one this Ilitek touchscreen. We're only supporting the new display module for now. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220421214243.352469-1-luca@z3ntu.xyz
2022-05-03arm64: dts: qcom: sc7280-qcard: Configure CTS pin to bias-bus-hold for bluetoothVijaya Krishna Nivarthi1-5/+14
WLAN rail was leaking power during RBSC/sleep even after turning BT off. Change active and sleep pinctrl configurations to handle same. Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1650556567-4995-3-git-send-email-quic_vnivarth@quicinc.com
2022-05-03arm64: dts: qcom: sc7280-idp: Configure CTS pin to bias-bus-hold for bluetoothVijaya Krishna Nivarthi1-6/+12
WLAN rail was leaking power during RBSC/sleep even after turning BT off. Change active and sleep pinctrl configurations to handle same. Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1650556567-4995-2-git-send-email-quic_vnivarth@quicinc.com
2022-05-03ARM: dts: qcom: sdx55: Remove ipa interconnect nodeStephen Boyd1-7/+0
This device node is unused now that we've removed the driver that consumed it in the kernel. Drop the unused node to save some space. Cc: Alex Elder <elder@linaro.org> Cc: Taniya Das <quic_tdas@quicinc.com> Cc: Mike Tipton <quic_mdtipton@quicinc.com> Cc: Georgi Djakov <djakov@kernel.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220415005828.1980055-2-swboyd@chromium.org
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.