| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Between me trying to get rid of iommu_present() and Mario wanting to
support the AMD equivalent of DMAR_PLATFORM_OPT_IN, scrutiny has shown
that the iommu_dma_protection attribute is being far too optimistic.
Even if an IOMMU might be present for some PCI segment in the system,
that doesn't necessarily mean it provides translation for the device(s)
we care about. Furthermore, all that DMAR_PLATFORM_OPT_IN really does
is tell us that memory was protected before the kernel was loaded, and
prevent the user from disabling the intel-iommu driver entirely. While
that lets us assume kernel integrity, what matters for actual runtime
DMA protection is whether we trust individual devices, based on the
"external facing" property that we expect firmware to describe for
Thunderbolt ports.
It's proven challenging to determine the appropriate ports accurately
given the variety of possible topologies, so while still not getting a
perfect answer, by putting enough faith in firmware we can at least get
a good bit closer. If we can see that any device near a Thunderbolt NHI
has all the requisites for Kernel DMA Protection, chances are that it
*is* a relevant port, but moreover that implies that firmware is playing
the game overall, so we'll use that to assume that all Thunderbolt ports
should be correctly marked and thus will end up fully protected.
CC: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/b153f208bc9eafab5105bad0358b77366509d2d4.1650878781.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
VT-d's dmar_platform_optin() actually represents a combination of
properties fairly well standardised by Microsoft as "Pre-boot DMA
Protection" and "Kernel DMA Protection"[1]. As such, we can provide
interested consumers with an abstracted capability rather than
driver-specific interfaces that won't scale. We name it for the former
aspect since that's what external callers are most likely to be
interested in; the latter is for the IOMMU layer to handle itself.
[1] https://docs.microsoft.com/en-us/windows-hardware/design/device-experiences/oem-kernel-dma-protection
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/d6218dff2702472da80db6aec2c9589010684551.1650878781.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
iommu_capable() only really works for systems where all IOMMU instances
are completely homogeneous, and all devices are IOMMU-mapped. Implement
the new variant which will be able to give a more accurate answer for
whichever device the caller is actually interested in, and even more so
once all the external users have been converted and we can reliably pass
the device pointer through the internal driver interface too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/8407eb9586677995b7a9fd70d0fd82d85929a9bb.1650878781.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
If the IOMMU is in use and an untrusted device is connected to an external
facing port but the address requested isn't page aligned will cause the
kernel to attempt to use bounce buffers.
If for some reason the bounce buffers have not been allocated this is a
problem that should be made apparent to the user.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220404204723.9767-3-mario.limonciello@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Previously the AMD IOMMU would only enable SWIOTLB in certain
circumstances:
* IOMMU in passthrough mode
* SME enabled
This logic however doesn't work when an untrusted device is plugged in
that doesn't do page aligned DMA transactions. The expectation is
that a bounce buffer is used for those transactions.
This fails like this:
swiotlb buffer is full (sz: 4096 bytes), total 0 (slots), used 0 (slots)
That happens because the bounce buffers have been allocated, followed by
freed during startup but the bounce buffering code expects that all IOMMUs
have left it enabled.
Remove the criteria to set up bounce buffers on AMD systems to ensure
they're always available for supporting untrusted devices.
Fixes: 82612d66d51d ("iommu: Allow the dma-iommu api to use bounce buffers")
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220404204723.9767-2-mario.limonciello@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
powerpc's asm/prom.h brings some headers that it doesn't
need itself.
In order to clean it up, first add missing headers in
users of asm/prom.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/06862cca930068e8fa4fdd0b20d74872d3b929d6.1648833431.git.christophe.leroy@csgroup.eu
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix regression causing some HCI events to be discarded when they
shouldn't.
* tag 'for-net-2022-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted
Bluetooth: hci_event: Fix creating hci_conn object on error status
Bluetooth: hci_event: Fix checking for invalid handle on error status
====================
Link: https://lore.kernel.org/r/20220427234031.1257281-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-5-ikegami.t@gmail.com
|
|
It is for the model number 01, 02, V1 and V2.
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-4-ikegami.t@gmail.com
|
|
Since commit dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to
check correct value") buffered writes fail on S29GL064N. This is
because, on S29GL064N, reads return 0xFF at the end of DQ polling for
write completion, where as, chip_good() check expects actual data
written to the last location to be returned post DQ polling completion.
Fix is to revert to using chip_good() for S29GL064N which only checks
for DQ lines to settle down to determine write completion.
Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/
Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value")
Cc: stable@vger.kernel.org
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-3-ikegami.t@gmail.com
|
|
This is a preparation patch for the S29GL064N buffer writes fix. There
is no functional change.
Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/
Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value")
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-2-ikegami.t@gmail.com
|
|
Dylan Hung says:
====================
Add reset deassertion for Aspeed MDIO
Add missing reset deassertion for Aspeed MDIO bus controller. The reset
is asserted by the hardware when power-on so the driver only needs to
deassert it. To be able to work with the old DT blobs, the reset is
optional since it may be deasserted by the bootloader or the previous
kernel.
V6:
- fix merge conflict for net-next
V5:
- fix error of dt_binding_check
V4:
- use ASPEED_RESET_MII instead of hardcoding in dt-binding example
V3:
- remove reset property from the required list of the device tree
bindings
- remove "Cc: stable@vger.kernel.org" from the commit messages
- add more description in the commit message of the dt-binding
V2:
- add reset property in the device tree bindings
- add reset assertion in the error path and driver remove
====================
Link: https://lore.kernel.org/r/20220427035501.17500-1-dylan_hung@aspeedtech.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add reset control properties into MDIO nodes. The 4 MDIO controllers in
AST2600 SOC share one reset control bit SCU50[3].
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add reset assertion/deassertion for Aspeed MDIO. There are 4 MDIO
controllers embedded in Aspeed AST2600 SOC and share one reset control
register SCU50[3]. To work with old DT blobs which don't have the reset
property, devm_reset_control_get_optional_shared is used in this change.
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The AST2600 MDIO bus controller has a reset control bit and must be
deasserted before manipulating the MDIO controller. By default, the
hardware asserts the reset so the driver only need to deassert it.
Regarding to the old DT blobs which don't have reset property in them,
the reset deassertion is usually done by the bootloader so the reset
property is optional to work with them.
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
UAPI Changes:
- GuC hwconfig support and query (John Harrison, Rodrigo Vivi, Tvrtko Ursulin)
- Sysfs support for multi-tile devices (Andi Shyti, Sujaritha Sundaresan)
- Per client GPU utilisation via fdinfo (Tvrtko Ursulin, Ashutosh Dixit)
- Add DRM_I915_QUERY_GEOMETRY_SUBSLICES (Matt Atwood)
Cross-subsystem Changes:
- Add GSC as a MEI auxiliary device (Tomas Winkler, Alexander Usyskin)
Core Changes:
- Document fdinfo format specification (Tvrtko Ursulin)
Driver Changes:
- Fix prime_mmap to work when using LMEM (Gwan-gyeong Mun)
- Fix vm open count and remove vma refcount (Thomas Hellström)
- Fixup setting screen_size (Matthew Auld)
- Opportunistically apply ALLOC_CONTIGIOUS (Matthew Auld)
- Limit where we apply TTM_PL_FLAG_CONTIGUOUS (Matthew Auld)
- Drop aux table invalidation on FlatCCS platforms (Matt Roper)
- Add missing boundary check in vm_access (Mastan Katragadda)
- Update topology dumps for Xe_HP (Matt Roper)
- Add support for steered register writes (Matt Roper)
- Add steering info to GuC register save/restore list (Daniele Ceraolo Spurio)
- Small PCI BAR enabling (Matthew Auld, Akeem G Abodunrin, CQ Tang)
- Add preemption changes for Wa_14015141709 (Akeem G Abodunrin)
- Add logical mapping for video decode engines (Matthew Brost)
- Don't evict unmappable VMAs when pinning with PIN_MAPPABLE (v2) (Vivek Kasireddy)
- GuC error capture support (Alan Previn, Daniele Ceraolo Spurio)
- avoid concurrent writes to aux_inv (Fei Yang)
- Add Wa_22014226127 (José Roberto de Souza)
- Sunset igpu legacy mmap support based on GRAPHICS_VER_FULL (Matt Roper)
- Evict and restore of compressed objects (Ramalingam C)
- Update to GuC version 70.1.1 (John Harrison)
- Add Wa_22011802037 force cs halt (Tilak Tangudu)
- Enable Wa_22011802037 for gen12 GuC based platforms (Umesh Nerlige Ramappa)
- GuC based workarounds for DG2 (Vinay Belgaumkar, John Harrison, Matthew Brost, José Roberto de Souza)
- consider min_page_size when migrating (Matthew Auld)
- Prep work for next GuC firmware release (John Harrison)
- Support platforms with CCS engines but no RCS (Matt Roper, Stuart Summers)
- Don't overallocate subslice storage (Matt Roper)
- Reduce stack usage in debugfs due to SSEU (John Harrison)
- Report steering details in debugfs (Matt Roper)
- Refactor some x86-ism out to prepare for non-x86 builds (Michael Cheng)
- add lmem_size modparam (CQ Tang)
- Refactor for non-x86 driver builds (Casey Bowman)
- Centralize computation of freq caps (Ashutosh Dixit)
- Update dma_buf_ops.unmap_dma_buf callback to use drm_gem_unmap_dma_buf() (Gwan-gyeong Mun)
- Limit the async bind to bind_async_flags (Matthew Auld)
- Stop checking for NULL vma->obj (Matthew Auld)
- Reduce overzealous alignment constraints for GGTT (Matthew Auld)
- Remove GEN12_SFC_DONE_MAX from register defs header (Matt Roper)
- Fix renamed struct field (Lucas De Marchi)
- Do not return '0' if there is nothing to return (Andi Shyti)
- fix i915_reg_t initialization (Jani Nikula)
- move the migration sanity check (Matthew Auld)
- handle more rounding in selftests (Matthew Auld)
- Perf and i915 query kerneldoc updates (Matt Roper)
- Use i915_probe_error instead of drm_err (Vinay Belgaumkar)
- sanity check object size in the buddy allocator (Matthew Auld)
- fixup selftests min_alignment usage (Matthew Auld)
- tweak selftests misaligned_case (Matthew Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/i915_vma.c
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Ymkfy8FjsG2JrodK@tursulin-mobl2
|
|
First release of GuC for DG2.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
CC: Tomasz Mistat <tomasz.mistat@intel.com>
CC: Ramalingam C <ramalingam.c@intel.com>
CC: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220427165550.3636686-3-John.C.Harrison@Intel.com
|
|
amd-drm-next-5.19-2022-04-22:
amdgpu:
- SMU message documentation update
- Misc code cleanups
- Documenation updates
- PSP TA updates
- Runtime PM regression fix
- SR-IOV header cleanup
- Misc fixes
amdkfd:
- TLB flush fixes
- GWS fixes
- CRIU GWS support
radeon:
- Misc code cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422150049.5859-1-alexander.deucher@amd.com
|
|
amd-drm-next-5.19-2022-04-15:
amdgpu:
- USB-C updates
- GPUVM updates
- TMZ fixes for RV
- DCN 3.1 pstate fixes
- Display z state fixes
- RAS fixes
- Misc code cleanups and spelling fixes
- More DC FP rework
- GPUVM TLB handling rework
- Power management sysfs code cleanup
- Add RAS support for VCN
- Backlight fix
- Add unique id support for more asics
- Misc display updates
- SR-IOV fixes
- Extend CG and PG flags to 64 bits
- Enable VCN clk sysfs nodes for navi12
amdkfd:
- Fix IO link cleanup during device removal
- RAS fixes
- Retry fault fixes
- Asynchronously free events
- SVM fixes
radeon:
- Drop some dead code
- Misc code cleanups
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415135144.5700-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
With tape devices, the SCF_TREAT_READ_AS_NORMAL flag is used by the target
subsystem to mark commands which have both data to return as well as sense
data. But with pscsi, SCF_TREAT_READ_AS_NORMAL can be set even if there is
no data to return. The SCF_TREAT_READ_AS_NORMAL flag causes the target core
to call iscsit data-in callbacks even if there is no data, which iscsit
does not support. This results in iscsit going into an error state
requiring recovery and being unable to complete the command to the
initiator.
This issue can be resolved by fixing pscsi to only set
SCF_TREAT_READ_AS_NORMAL if there is valid data to return alongside the
sense data.
Link: https://lore.kernel.org/r/20220427183250.291881-1-djeffery@redhat.com
Fixes: bd81372065fa ("scsi: target: transport should handle st FM/EOM/ILI reads")
Reported-by: Scott Hamilton <scott.hamilton@atos.net>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When xdp_rxq_info_user program exits unexpectedly, it doesn't detach xdp
prog of device, and other xdp prog can't be attached to the device. So
call init_exit() to detach xdp prog when program exits unexpectedly.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220427062338.80173-1-shaozhengchao@huawei.com
|
|
Implement per subtest log collection for both parallel
and sequential test execution. This allows granular
per-subtest error output in the 'All error logs' section.
Add subtest log transfer into the protocol during the
parallel test execution.
Move all test log printing logic into dump_test_log
function. One exception is the output of test names when
verbose printing is enabled. Move test name/result
printing into separate functions to avoid repetition.
Print all successful subtest results in the log. Print
only failed test logs when test does not have subtests.
Or only failed subtests' logs when test has subtests.
Disable 'All error logs' output when verbose mode is
enabled. This functionality was already broken and is
causing confusion.
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220427041353.246007-1-mykolal@fb.com
|
|
Pull MD updates from Song:
"1. Improve annotation in raid5 code, by Logan Gunthorpe.
2. Support MD_BROKEN flag in raid-1/5/10, by Mariusz Tkaczyk.
3. Other small fixes/cleanups."
* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: Replace role magic numbers with defined constants
md/raid0: Ignore RAID0 layout if the second zone has only one device
md/raid5: Annotate functions that hold device_lock with __must_hold
md/raid5-ppl: Annotate with rcu_dereference_protected()
md/raid5: Annotate rdev/replacement access when mddev_lock is held
md/raid5: Annotate rdev/replacement accesses when nr_pending is elevated
md/raid5: Add __rcu annotation to struct disk_info
md/raid5: Un-nest struct raid5_percpu definition
md/raid5: Cleanup setup_conf() error returns
md: replace deprecated strlcpy & remove duplicated line
md/bitmap: don't set sb values if can't pass sanity check
md: fix an incorrect NULL check in md_reload_sb
md: fix an incorrect NULL check in does_sb_need_changing
raid5: introduce MD_BROKEN
md: Set MD_BROKEN for RAID1 and RAID10
|
|
Put device node in error path in fec_enet_init_stop_mode().
Fixes: 8a448bf832af ("net: ethernet: fec: move GPR register offset and bit into DT")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220426125231.375688-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While handling PCI errors (AER flow) driver tries to
disable NAPI [napi_disable()] after NAPI is deleted
[__netif_napi_del()] which causes unexpected system
hang/crash.
System message log shows the following:
=======================================
[ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures.
[ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)'
[ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
bnx2x->error_detected(IO frozen)
[ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports:
'need reset'
[ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking
bnx2x->error_detected(IO frozen)
[ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports:
'need reset'
[ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset'
[ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow:
[ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows:
[ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow:
[ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows:
[ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset'
[ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
bnx2x->slot_reset()
[ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing...
[ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset
--> driver unload
Uninterruptible tasks
=====================
crash> ps | grep UN
213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd]
215 2 0 c000000004c80000 UN 0.0 0 0
[kworker/0:2]
2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd
4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty
4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty
32423 2 26 c00000020038c580 UN 0.0 0 0
[kworker/26:3]
32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd
32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail
33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail
33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup
33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd
33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail
33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd
EEH handler hung while bnx2x sleeping and holding RTNL lock
===========================================================
crash> bt 213
PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd"
#0 [c000000004d477e0] __schedule at c000000000c70808
#1 [c000000004d478b0] schedule at c000000000c70ee0
#2 [c000000004d478e0] schedule_timeout at c000000000c76dec
#3 [c000000004d479c0] msleep at c0000000002120cc
#4 [c000000004d479f0] napi_disable at c000000000a06448
^^^^^^^^^^^^^^^^
#5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x]
#6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x]
#7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc
#8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8
#9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64
And the sleeping source code
============================
crash> dis -ls c000000000a06448
FILE: ../net/core/dev.c
LINE: 6702
6697 {
6698 might_sleep();
6699 set_bit(NAPI_STATE_DISABLE, &n->state);
6700
6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
* 6702 msleep(1);
6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state))
6704 msleep(1);
6705
6706 hrtimer_cancel(&n->timer);
6707
6708 clear_bit(NAPI_STATE_DISABLE, &n->state);
6709 }
EEH calls into bnx2x twice based on the system log above, first through
bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes
the following call chains:
bnx2x_io_error_detected()
+-> bnx2x_eeh_nic_unload()
+-> bnx2x_del_all_napi()
+-> __netif_napi_del()
bnx2x_io_slot_reset()
+-> bnx2x_netif_stop()
+-> bnx2x_napi_disable()
+->napi_disable()
Fix this by correcting the sequence of NAPI APIs usage,
that is delete the NAPI after disabling it.
Fixes: 7fa6f34081f1 ("bnx2x: AER revised")
Reported-by: David Christensen <drc@linux.vnet.ibm.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-04-27
We've added 85 non-merge commits during the last 18 day(s) which contain
a total of 163 files changed, 4499 insertions(+), 1521 deletions(-).
The main changes are:
1) Teach libbpf to enhance BPF verifier log with human-readable and relevant
information about failed CO-RE relocations, from Andrii Nakryiko.
2) Add typed pointer support in BPF maps and enable it for unreferenced pointers
(via probe read) and referenced ones that can be passed to in-kernel helpers,
from Kumar Kartikeya Dwivedi.
3) Improve xsk to break NAPI loop when rx queue gets full to allow for forward
progress to consume descriptors, from Maciej Fijalkowski & Björn Töpel.
4) Fix a small RCU read-side race in BPF_PROG_RUN routines which dereferenced
the effective prog array before the rcu_read_lock, from Stanislav Fomichev.
5) Implement BPF atomic operations for RV64 JIT, and add libbpf parsing logic
for USDT arguments under riscv{32,64}, from Pu Lehui.
6) Implement libbpf parsing of USDT arguments under aarch64, from Alan Maguire.
7) Enable bpftool build for musl and remove nftw with FTW_ACTIONRETVAL usage
so it can be shipped under Alpine which is musl-based, from Dominique Martinet.
8) Clean up {sk,task,inode} local storage trace RCU handling as they do not
need to use call_rcu_tasks_trace() barrier, from KP Singh.
9) Improve libbpf API documentation and fix error return handling of various
API functions, from Grant Seltzer.
10) Enlarge offset check for bpf_skb_{load,store}_bytes() helpers given data
length of frags + frag_list may surpass old offset limit, from Liu Jian.
11) Various improvements to prog_tests in area of logging, test execution
and by-name subtest selection, from Mykola Lysenko.
12) Simplify map_btf_id generation for all map types by moving this process
to build time with help of resolve_btfids infra, from Menglong Dong.
13) Fix a libbpf bug in probing when falling back to legacy bpf_probe_read*()
helpers; the probing caused always to use old helpers, from Runqing Yang.
14) Add support for ARCompact and ARCv2 platforms for libbpf's PT_REGS
tracing macros, from Vladimir Isaev.
15) Cleanup BPF selftests to remove old & unneeded rlimit code given kernel
switched to memcg-based memory accouting a while ago, from Yafang Shao.
16) Refactor of BPF sysctl handlers to move them to BPF core, from Yan Zhu.
17) Fix BPF selftests in two occasions to work around regressions caused by latest
LLVM to unblock CI until their fixes are worked out, from Yonghong Song.
18) Misc cleanups all over the place, from various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Add libbpf's log fixup logic selftests
libbpf: Fix up verifier log for unguarded failed CO-RE relos
libbpf: Simplify bpf_core_parse_spec() signature
libbpf: Refactor CO-RE relo human description formatting routine
libbpf: Record subprog-resolved CO-RE relocations unconditionally
selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests
libbpf: Avoid joining .BTF.ext data with BPF programs by section name
libbpf: Fix logic for finding matching program for CO-RE relocation
libbpf: Drop unhelpful "program too large" guess
libbpf: Fix anonymous type check in CO-RE logic
bpf: Compute map_btf_id during build time
selftests/bpf: Add test for strict BTF type check
selftests/bpf: Add verifier tests for kptr
selftests/bpf: Add C tests for kptr
libbpf: Add kptr type tag macros to bpf_helpers.h
bpf: Make BTF type match stricter for release arguments
bpf: Teach verifier about kptr_get kfunc helpers
bpf: Wire up freeing of referenced kptr
bpf: Populate pairs of btf_id and destructor kfunc in btf
bpf: Adapt copy_map_value for multiple offset case
...
====================
Link: https://lore.kernel.org/r/20220427224758.20976-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The IDs added here are the subset reserved for 'motherboard down'
designs of DG2. We have all the necessary support upstream to enable
these now (although they'll continue to require force_probe until the
usual requirements are met).
The remaining DG2 IDs for add-in cards will come in a future patch once
some additional required functionality has fully landed.
Bspec: 44477
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425211251.77154-3-matthew.d.roper@intel.com
|
|
It has been obsolete since the introduction of the 'perf record --kcore'
option.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20220427141946.269523-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The mib counters for the ksz9477 is same for the ksz9477 switch and
LAN937x switch. Hence moving it to ksz_common.c file in order to have it
generic function. The DSA hook get_stats64 now can call ksz_get_stats64.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220426091048.9311-1-arun.ramadoss@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Calling tls_append_frag when max_open_record_len == record->len might
add an empty fragment to the TLS record if the call happens to be on the
page boundary. Normally tls_append_frag coalesces the zero-sized
fragment to the previous one, but not if it's on page boundary.
If a resync happens then, the mlx5 driver posts dump WQEs in
tx_post_resync_dump, and the empty fragment may become a data segment
with byte_count == 0, which will confuse the NIC and lead to a CQE
error.
This commit fixes the described issue by skipping tls_append_frag on
zero size to avoid adding empty fragments. The fix is not in the driver,
because an empty fragment is hardly the desired behavior.
Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220426154949.159055-1-maximmi@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2022-04-27
We've added 5 non-merge commits during the last 20 day(s) which contain
a total of 6 files changed, 34 insertions(+), 12 deletions(-).
The main changes are:
1) Fix xsk sockets when rx and tx are separately bound to the same umem, also
fix xsk copy mode combined with busy poll, from Maciej Fijalkowski.
2) Fix BPF tunnel/collect_md helpers with bpf_xmit lwt hook usage which triggered
a crash due to invalid metadata_dst access, from Eyal Birger.
3) Fix release of page pool in XDP live packet mode, from Toke Høiland-Jørgensen.
4) Fix potential NULL pointer dereference in kretprobes, from Adam Zabrocki.
(Masami & Steven preferred this small fix to be routed via bpf tree given it's
follow-up fix to Masami's rethook work that went via bpf earlier, too.)
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xsk: Fix possible crash when multiple sockets are created
kprobes: Fix KRETPROBES when CONFIG_KRETPROBE_ON_RETHOOK is set
bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook
bpf: Fix release of page_pool in BPF_PROG_RUN in test runner
xsk: Fix l2fwd for copy mode + busy poll combo
====================
Link: https://lore.kernel.org/r/20220427212748.9576-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When taking a translation fault for an IPA that is outside of
the range defined by the hypervisor (between the HW PARange and
the IPA range), we stupidly treat it as an IO and forward the access
to userspace. Of course, userspace can't do much with it, and things
end badly.
Arguably, the guest is braindead, but we should at least catch the
case and inject an exception.
Check the faulting IPA against:
- the sanitised PARange: inject an address size fault
- the IPA size: inject an abort
Reported-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Merge series from Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>:
This patch series aims to fix trivial issues found in rz-ssi driver.
|
|
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
simplify code pattern as recommended by Mark Brown.
|
|
Without MMHUB clock gating being enabled then MMHUB will not disconnect
from DF and will result in DF C-state entry can't be accessed during S2idle
suspend, and eventually s0ix entry will be blocked.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The adev->pm.mutx is already held at the beginning of
amdgpu_dpm_compute_clocks/amdgpu_dpm_enable_uvd/amdgpu_dpm_enable_vce.
But on their calling path, amdgpu_display_bandwidth_update will be
called and thus its sub functions amdgpu_dpm_get_sclk/mclk. They
will then try to acquire the same adev->pm.mutex and deadlock will
occur.
By placing amdgpu_display_bandwidth_update outside of adev->pm.mutex
protection(considering logically they do not need such protection) and
restructuring the call flow accordingly, we can eliminate the deadlock
issue. This comes with no real logics change.
Fixes: 3712e7a49459 ("drm/amd/pm: unified lock protections in amdgpu_dpm.c")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Link: https://lore.kernel.org/all/9e689fea-6c69-f4b0-8dee-32c4cf7d8f9c@molgen.mpg.de/
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1957
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When list_for_each_entry() completes the iteration over the whole list
without breaking the loop, the iterator value will be a bogus pointer
computed based on the head element.
While it is safe to use the pointer to determine if it was computed
based on the head element, either with list_entry_is_head() or
&pos->member == head, using the iterator variable after the loop should
be avoided.
In preparation to limit the scope of a list iterator to the list
traversal loop, use a dedicated pointer to point to the found element [1].
Link: https://lkml.kernel.org/r/20220427170734.819891-5-jakobkoschel@gmail.com
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When dcn20_clk_src_construct() fails, we need to release clk_src.
Fixes: 6f4e6361c3ff ("drm/amd/display: Add Renoir resource (v2)")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Link: https://lkml.kernel.org/r/20220427170734.819891-4-jakobkoschel@gmail.com
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
In preparation to limit the scope of a list iterator to the list
traversal loop, use a dedicated pointer to point to the found element
[1].
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Link: https://lkml.kernel.org/r/20220427170734.819891-3-jakobkoschel@gmail.com
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
In preparation to limit the scope of the list iterator variable to the
traversal loop, use a dedicated pointer to point to the found element
[1].
Before, the code implicitly used the head when no element was found
when using &pos->list. Since the new variable is only set if an
element was found, the head needs to be used explicitly if the
variable is NULL.
Link: https://lkml.kernel.org/r/20220427170734.819891-2-jakobkoschel@gmail.com
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add documentation for newly introduced trace clock "tai".
This clock corresponds to CLOCK_TAI.
Link: https://lkml.kernel.org/r/20220414091805.89667-4-kurt@linutronix.de
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
A fast/NMI safe accessor for CLOCK_TAI has been introduced.
Use it for adding the additional trace clock "tai".
Link: https://lkml.kernel.org/r/20220414091805.89667-3-kurt@linutronix.de
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When the new logic was made to handle deltas of events from interrupts
that interrupted other events, it required 64 bit local atomics.
Unfortunately, 64 bit local atomics are expensive on 32 bit architectures.
Thus, commit 10464b4aa605e ("ring-buffer: Add rb_time_t 64 bit operations
for speeding up 32 bit") created a type of seq lock timer for 32 bits.
It used two 32 bit local atomics, but required 2 bits from them each for
synchronization, making it only 60 bits.
Add a new "msb" field to hold the extra 4 bits that are cut off.
Link: https://lore.kernel.org/all/20220426175338.3807ca4f@gandalf.local.home/
Link: https://lkml.kernel.org/r/20220427170812.53cc7139@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
We normally runtime suspend when there are displays attached if they
are in the DPMS off state, however, if something wakes the GPU
we send a hotplug event on resume (in case any displays were connected
while the GPU was in suspend) which can cause userspace to light
up the displays again soon after they were turned off.
Prior to
commit 087451f372bf76 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's."),
the driver took a runtime pm reference when the fbdev emulation was
enabled because we didn't implement proper shadowing support for
vram access when the device was off so the device never runtime
suspended when there was a console bound. Once that commit landed,
we now utilize the core fb helper implementation which properly
handles the emulation, so runtime pm now suspends in cases where it did
not before. Ultimately, we need to sort out why runtime suspend in not
working in this case for some users, but this should restore similar
behavior to before.
v2: move check into runtime_suspend
v3: wake ups -> wakeups in comment, retain pm_runtime behavior in
runtime_idle callback
Fixes: 087451f372bf76 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.")
Link: https://lore.kernel.org/r/20220403132322.51c90903@darkstar.example.org/
Tested-by: Michele Ballabio <ballabio.m@gmail.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Add support to checkpoint/restore GWS (Global Wave Sync) queues.
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dqm->gws_queue_count and pdd->qpd.mapped_gws_queue need to be updated
each time the queue gets evicted.
Fixes: b8020b0304c8 ("drm/amdkfd: Enable over-subscription with >1 GWS queue")
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
kvm->arch.arm_pmu is set when userspace attempts to set the first PMU
attribute. As certain attributes are mandatory, arm_pmu ends up always
being set to a valid arm_pmu, otherwise KVM will refuse to run the VCPU.
However, this only happens if the VCPU has the PMU feature. If the VCPU
doesn't have the feature bit set, kvm->arch.arm_pmu will be left
uninitialized and equal to NULL.
KVM doesn't do ID register emulation for 32-bit guests and accesses to the
PMU registers aren't gated by the pmu_visibility() function. This is done
to prevent injecting unexpected undefined exceptions in guests which have
detected the presence of a hardware PMU. But even though the VCPU feature
is missing, KVM still attempts to emulate certain aspects of the PMU when
PMU registers are accessed. This leads to a NULL pointer dereference like
this one, which happens on an odroid-c4 board when running the
kvm-unit-tests pmu-cycle-counter test with kvmtool and without the PMU
feature being set:
[ 454.402699] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000150
[ 454.405865] Mem abort info:
[ 454.408596] ESR = 0x96000004
[ 454.411638] EC = 0x25: DABT (current EL), IL = 32 bits
[ 454.416901] SET = 0, FnV = 0
[ 454.419909] EA = 0, S1PTW = 0
[ 454.423010] FSC = 0x04: level 0 translation fault
[ 454.427841] Data abort info:
[ 454.430687] ISV = 0, ISS = 0x00000004
[ 454.434484] CM = 0, WnR = 0
[ 454.437404] user pgtable: 4k pages, 48-bit VAs, pgdp=000000000c924000
[ 454.443800] [0000000000000150] pgd=0000000000000000, p4d=0000000000000000
[ 454.450528] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 454.456036] Modules linked in:
[ 454.459053] CPU: 1 PID: 267 Comm: kvm-vcpu-0 Not tainted 5.18.0-rc4 #113
[ 454.465697] Hardware name: Hardkernel ODROID-C4 (DT)
[ 454.470612] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 454.477512] pc : kvm_pmu_event_mask.isra.0+0x14/0x74
[ 454.482427] lr : kvm_pmu_set_counter_event_type+0x2c/0x80
[ 454.487775] sp : ffff80000a9839c0
[ 454.491050] x29: ffff80000a9839c0 x28: ffff000000a83a00 x27: 0000000000000000
[ 454.498127] x26: 0000000000000000 x25: 0000000000000000 x24: ffff00000a510000
[ 454.505198] x23: ffff000000a83a00 x22: ffff000003b01000 x21: 0000000000000000
[ 454.512271] x20: 000000000000001f x19: 00000000000003ff x18: 0000000000000000
[ 454.519343] x17: 000000008003fe98 x16: 0000000000000000 x15: 0000000000000000
[ 454.526416] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 454.533489] x11: 000000008003fdbc x10: 0000000000009d20 x9 : 000000000000001b
[ 454.540561] x8 : 0000000000000000 x7 : 0000000000000d00 x6 : 0000000000009d00
[ 454.547633] x5 : 0000000000000037 x4 : 0000000000009d00 x3 : 0d09000000000000
[ 454.554705] x2 : 000000000000001f x1 : 0000000000000000 x0 : 0000000000000000
[ 454.561779] Call trace:
[ 454.564191] kvm_pmu_event_mask.isra.0+0x14/0x74
[ 454.568764] kvm_pmu_set_counter_event_type+0x2c/0x80
[ 454.573766] access_pmu_evtyper+0x128/0x170
[ 454.577905] perform_access+0x34/0x80
[ 454.581527] kvm_handle_cp_32+0x13c/0x160
[ 454.585495] kvm_handle_cp15_32+0x1c/0x30
[ 454.589462] handle_exit+0x70/0x180
[ 454.592912] kvm_arch_vcpu_ioctl_run+0x1c4/0x5e0
[ 454.597485] kvm_vcpu_ioctl+0x23c/0x940
[ 454.601280] __arm64_sys_ioctl+0xa8/0xf0
[ 454.605160] invoke_syscall+0x48/0x114
[ 454.608869] el0_svc_common.constprop.0+0xd4/0xfc
[ 454.613527] do_el0_svc+0x28/0x90
[ 454.616803] el0_svc+0x34/0xb0
[ 454.619822] el0t_64_sync_handler+0xa4/0x130
[ 454.624049] el0t_64_sync+0x18c/0x190
[ 454.627675] Code: a9be7bfd 910003fd f9000bf3 52807ff3 (b9415001)
[ 454.633714] ---[ end trace 0000000000000000 ]---
In this particular case, Linux hasn't detected the presence of a hardware
PMU because the PMU node is missing from the DTB, so userspace would have
been unable to set the VCPU PMU feature even if it attempted it. What
happens is that the 32-bit guest reads ID_DFR0, which advertises the
presence of the PMU, and when it tries to program a counter, it triggers
the NULL pointer dereference because kvm->arch.arm_pmu is NULL.
kvm-arch.arm_pmu was introduced by commit 46b187821472 ("KVM: arm64:
Keep a per-VM pointer to the default PMU"). Until that commit, this
error would be triggered instead:
[ 73.388140] ------------[ cut here ]------------
[ 73.388189] Unknown PMU version 0
[ 73.390420] WARNING: CPU: 1 PID: 264 at arch/arm64/kvm/pmu-emul.c:36 kvm_pmu_event_mask.isra.0+0x6c/0x74
[ 73.399821] Modules linked in:
[ 73.402835] CPU: 1 PID: 264 Comm: kvm-vcpu-0 Not tainted 5.17.0 #114
[ 73.409132] Hardware name: Hardkernel ODROID-C4 (DT)
[ 73.414048] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 73.420948] pc : kvm_pmu_event_mask.isra.0+0x6c/0x74
[ 73.425863] lr : kvm_pmu_event_mask.isra.0+0x6c/0x74
[ 73.430779] sp : ffff80000a8db9b0
[ 73.434055] x29: ffff80000a8db9b0 x28: ffff000000dbaac0 x27: 0000000000000000
[ 73.441131] x26: ffff000000dbaac0 x25: 00000000c600000d x24: 0000000000180720
[ 73.448203] x23: ffff800009ffbe10 x22: ffff00000b612000 x21: 0000000000000000
[ 73.455276] x20: 000000000000001f x19: 0000000000000000 x18: ffffffffffffffff
[ 73.462348] x17: 000000008003fe98 x16: 0000000000000000 x15: 0720072007200720
[ 73.469420] x14: 0720072007200720 x13: ffff800009d32488 x12: 00000000000004e6
[ 73.476493] x11: 00000000000001a2 x10: ffff800009d32488 x9 : ffff800009d32488
[ 73.483565] x8 : 00000000ffffefff x7 : ffff800009d8a488 x6 : ffff800009d8a488
[ 73.490638] x5 : ffff0000f461a9d8 x4 : 0000000000000000 x3 : 0000000000000001
[ 73.497710] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000000dbaac0
[ 73.504784] Call trace:
[ 73.507195] kvm_pmu_event_mask.isra.0+0x6c/0x74
[ 73.511768] kvm_pmu_set_counter_event_type+0x2c/0x80
[ 73.516770] access_pmu_evtyper+0x128/0x16c
[ 73.520910] perform_access+0x34/0x80
[ 73.524532] kvm_handle_cp_32+0x13c/0x160
[ 73.528500] kvm_handle_cp15_32+0x1c/0x30
[ 73.532467] handle_exit+0x70/0x180
[ 73.535917] kvm_arch_vcpu_ioctl_run+0x20c/0x6e0
[ 73.540489] kvm_vcpu_ioctl+0x2b8/0x9e0
[ 73.544283] __arm64_sys_ioctl+0xa8/0xf0
[ 73.548165] invoke_syscall+0x48/0x114
[ 73.551874] el0_svc_common.constprop.0+0xd4/0xfc
[ 73.556531] do_el0_svc+0x28/0x90
[ 73.559808] el0_svc+0x28/0x80
[ 73.562826] el0t_64_sync_handler+0xa4/0x130
[ 73.567054] el0t_64_sync+0x1a0/0x1a4
[ 73.570676] ---[ end trace 0000000000000000 ]---
[ 73.575382] kvm: pmu event creation failed -2
The root cause remains the same: kvm->arch.pmuver was never set to
something sensible because the VCPU feature itself was never set.
The odroid-c4 is somewhat of a special case, because Linux doesn't probe
the PMU. But the above errors can easily be reproduced on any hardware,
with or without a PMU driver, as long as userspace doesn't set the PMU
feature.
Work around the fact that KVM advertises a PMU even when the VCPU feature
is not set by gating all PMU emulation on the feature. The guest can still
access the registers without KVM injecting an undefined exception.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220425145530.723858-1-alexandru.elisei@arm.com
|
|
When pKVM is enabled, host memory accesses are translated by an identity
mapping at stage-2, which is populated lazily in response to synchronous
exceptions from 64-bit EL1 and EL0.
Extend this handling to cover exceptions originating from 32-bit EL0 as
well. Although these are very unlikely to occur in practice, as the
kernel typically ensures that user pages are initialised before mapping
them in, drivers could still map previously untouched device pages into
userspace and expect things to work rather than panic the system.
Cc: Quentin Perret <qperret@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220427171332.13635-1-will@kernel.org
|
|
Merge fixes from Andrew Morton:
"Two patches.
Subsystems affected by this patch series: mm/kasan and mm/debug"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
docs: vm/page_owner: use literal blocks for param description
kasan: prevent cpu_quarantine corruption when CPU offline and cache shrink occur at same time
|
Robin Murphy
Mario Limonciello
Christophe Leroy
Paolo Abeni
Tokunori Ikegami
Dylan Hung
Dave Airlie
John Harrison
David Jeffery
Zhengchao Shao
Mykola Lysenko
Jens Axboe
Yang Yingliang
Manish Chopra
Jakub Kicinski
Matt Roper
Adrian Hunter
Arun Ramadoss
Maxim Mikityanskiy
Marc Zyngier
Mark Brown
Prike Liang
Evan Quan
Jakob Koschel
Miaoqian Lin
Kurt Kanzenbach
Steven Rostedt (Google)
Alex Deucher
David Yat Sin
Alexandru Elisei
Will Deacon
Linus Torvalds