| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
All pin groups function as gpio unless set otherwise. Therefore, remove
this unnecessary binding.
Tested on UniElec U7621-06-16M on OpenWrt.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Mux the MT7530 switch's phy4 to the SoC's gmac1 on the GB-PC1 devicetree.
This achieves 2 Gbps total bandwidth to the CPU using the second RGMII.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add mdio label to the mdio-bus node to easily refer to it.
Use the newly created label on the GB-PC2 devicetree.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Replace macro MACvReadISR with VNSvInPortD and as it was the only
user, it can now be removed.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/ddd403a3f590cb81403197442b12c3986c98ba25.1651036713.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace macro MACvReadMIBCounter with VNSvInPortD and as it
was the only user, it can now be removed.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/e1b7156e2c689cf53c738642fd9b33816ec89f92.1651036713.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the handling of MEM_FRAG_TX/RX SMCs when the full memory descriptor
does not fit in a single innovation of a memory sharing request.
The current implementation expects a FFA_MEM_SHARE/FFA_MEM_LEND
call to always receive a FFA_SUCCESS response, however in the
case where a full descriptor does not fit inside the partitions
TX buffer, the call can instead complete with a FFA_MEM_FRAG_RX SMC
to request the next part of the descriptor to be transmitted.
Similarly a FFA_MEM_FRAG_TX call currently only expects
FFA_MEM_FRAG_RX as a response, however once the full descriptor
has been transmitted the FFA_SUCCESS ABI will be used to indicate
successful transmission.
Update the existing code to match the expected behaviour.
Link: https://lore.kernel.org/r/20220426121219.1801601-1-marc.bonnici@arm.com
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The decision to free kernfs_open_node object in kernfs_put_open_node can
be taken based on whether kernfs_open_node->files list is empty or not. As
far as kernfs_drain_open_files is concerned it can't overlap with
kernfs_fops_open and hence can check for ->attr.open optimistically
(if ->attr.open is NULL) or under kernfs_open_file_mutex (if it needs to
traverse the ->files list.) Thus kernfs_drain_open_files can work w/o ref
counting involved kernfs_open_node as well.
So remove ->refcnt and modify the above mentioned users accordingly.
Suggested by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Imran Khan <imran.f.khan@oracle.com>
Link: https://lore.kernel.org/r/20220324103040.584491-2-imran.f.khan@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When ACPI table includes _PLD fields for a device, create a new
directory (physical_location) in sysfs to share _PLD fields.
Currently without PLD information, when there are multiple of same
devices, it is hard to distinguish which device corresponds to which
physical device at which location. For example, when there are two Type
C connectors, it is hard to find out which connector corresponds to the
Type C port on the left panel versus the Type C port on the right panel.
With PLD information provided, we can determine which specific device at
which location is doing what.
_PLD output includes much more fields, but only generic fields are added
and exposed to sysfs, so that non-ACPI devices can also support it in
the future. The minimal generic fields needed for locating a device are
the following.
- panel
- vertical_position
- horizontal_position
- dock
- lid
Signed-off-by: Won Chung <wonchung@google.com>
Link: https://lore.kernel.org/r/20220314195458.271430-1-wonchung@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The commit a85a6c86c25b ("driver core: platform: Clarify that IRQ 0 is
invalid") only calls WARN() when IRQ0 is about to be returned, however
using IRQ0 is considered invalid (according to Linus) outside the arch/
code where it's used by the i8253 drivers. Many driver subsystems treat
0 specially (e.g. as an indication of the polling mode by libata), so
the users of platform_get_irq[_byname]() in them would have to filter
out IRQ0 explicitly and this (quite obviously) doesn't scale...
Let's finally get this straight and return -EINVAL instead of IRQ0!
Fixes: a85a6c86c25b ("driver core: platform: Clarify that IRQ 0 is invalid")
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/025679e1-1f0a-ae4b-4369-01164f691511@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Compaction sysfs file is created via compaction_register_node in
register_node. But we forgot to remove it in unregister_node. Thus
compaction sysfs file is leaked. Using compaction_unregister_node
to fix this issue.
Fixes: ed4a6d7f0676 ("mm: compaction: add /sys trigger for per-node memory compaction")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Link: https://lore.kernel.org/r/20220401070905.43679-1-linmiaohe@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When there are 2 matched drivers for a device using
async probe mechanism, the dev->p->async_driver might
be overridden by the last attached driver.
So just skip the later one if the previous matched driver
was not handled by async thread yet.
Below is my use case which having this problem.
Make both driver mmcblk and mmc_test allow async probe,
the dev->p->async_driver will be overridden by the later driver
mmc_test and bind to the device then claim it for testing.
When it happen, mmcblk will never do probe again.
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Link: https://lore.kernel.org/r/20220316074328.1801-1-mark-pk.tsai@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Smatch reports this issue
msm_ringbuffer.c:43:36: warning: symbol 'msm_sched_ops' was not declared. Should it be static?
msm_sched_ops is only used in msm_ringbuffer.c so change its
storage-class specifier to static.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482883/
Link: https://lore.kernel.org/r/20220421131507.1557667-1-trix@redhat.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Remove unused MSM_DISPLAY_CAP_HOT_PLUG and MSM_DISPLAY_CAP_EDID
macros from msm_drv.h.
Even if we need these, there are drm equivalent ones present.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/482260/
Link: https://lore.kernel.org/r/1650049782-8421-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add the SC2730 PMIC support for module autoloading
through SPI modalises.
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220425132410.2708304-1-gengcixi@gmail.com
|
|
Use if and else instead of if(A) and if (!A).
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220424094552.105466-1-wanjiabing@vivo.com
|
|
Use if and else instead of if(A) and if (!A).
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220424094522.105262-1-wanjiabing@vivo.com
|
|
This read the country code from SMBIOS and send the country code
to firmware, firmware will indicate the regulatory domain info of the
country code and then ath11k will use the info.
dmesg:
[ 1242.637173] ath11k_pci 0000:02:00.0: chip_id 0x2 chip_family 0xb board_id 0xff soc_id 0x400c0200
[ 1242.637176] ath11k_pci 0000:02:00.0: fw_version 0x110b09e5 fw_build_timestamp 2021-06-22 09:32 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-02533-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
[ 1242.637253] ath11k_pci 0000:02:00.0: worldwide regdomain setting from SMBIOS
[ 1242.637259] ath11k_pci 0000:02:00.0: bdf variant name not found.
[ 1242.637261] ath11k_pci 0000:02:00.0: SMBIOS bdf variant name not set.
[ 1242.637263] ath11k_pci 0000:02:00.0: DT bdf variant name not set.
[ 1242.927543] ath11k_pci 0000:02:00.0: set current country pdev id 0 alpha2 00
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220421023501.32167-1-quic_wgong@quicinc.com
|
|
When ath11k modules are removed using rmmod with spectral scan enabled,
crash is observed. Different crash trace is observed for each crash.
Send spectral scan disable WMI command to firmware before cleaning
the spectral dbring in the spectral_deinit API to avoid this crash.
call trace from one of the crash observed:
[ 1252.880802] Unable to handle kernel NULL pointer dereference at virtual address 00000008
[ 1252.882722] pgd = 0f42e886
[ 1252.890955] [00000008] *pgd=00000000
[ 1252.893478] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[ 1253.093035] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.89 #0
[ 1253.115261] Hardware name: Generic DT based system
[ 1253.121149] PC is at ath11k_spectral_process_data+0x434/0x574 [ath11k]
[ 1253.125940] LR is at 0x88e31017
[ 1253.132448] pc : [<7f9387b8>] lr : [<88e31017>] psr: a0000193
[ 1253.135488] sp : 80d01bc8 ip : 00000001 fp : 970e0000
[ 1253.141737] r10: 88e31000 r9 : 970ec000 r8 : 00000080
[ 1253.146946] r7 : 94734040 r6 : a0000113 r5 : 00000057 r4 : 00000000
[ 1253.152159] r3 : e18cb694 r2 : 00000217 r1 : 1df1f000 r0 : 00000001
[ 1253.158755] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
[ 1253.165266] Control: 10c0383d Table: 5e71006a DAC: 00000055
[ 1253.172472] Process swapper/0 (pid: 0, stack limit = 0x60870141)
[ 1253.458055] [<7f9387b8>] (ath11k_spectral_process_data [ath11k]) from [<7f917fdc>] (ath11k_dbring_buffer_release_event+0x214/0x2e4 [ath11k])
[ 1253.466139] [<7f917fdc>] (ath11k_dbring_buffer_release_event [ath11k]) from [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx+0x1840/0x29cc [ath11k])
[ 1253.478807] [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx [ath11k]) from [<7f8fe868>] (ath11k_htc_rx_completion_handler+0x180/0x4e0 [ath11k])
[ 1253.490699] [<7f8fe868>] (ath11k_htc_rx_completion_handler [ath11k]) from [<7f91308c>] (ath11k_ce_per_engine_service+0x2c4/0x3b4 [ath11k])
[ 1253.502386] [<7f91308c>] (ath11k_ce_per_engine_service [ath11k]) from [<7f9a4198>] (ath11k_pci_ce_tasklet+0x28/0x80 [ath11k_pci])
[ 1253.514811] [<7f9a4198>] (ath11k_pci_ce_tasklet [ath11k_pci]) from [<8032227c>] (tasklet_action_common.constprop.2+0x64/0xe8)
[ 1253.526476] [<8032227c>] (tasklet_action_common.constprop.2) from [<803021e8>] (__do_softirq+0x130/0x2d0)
[ 1253.537756] [<803021e8>] (__do_softirq) from [<80322610>] (irq_exit+0xcc/0xe8)
[ 1253.547304] [<80322610>] (irq_exit) from [<8036a4a4>] (__handle_domain_irq+0x60/0xb4)
[ 1253.554428] [<8036a4a4>] (__handle_domain_irq) from [<805eb348>] (gic_handle_irq+0x4c/0x90)
[ 1253.562321] [<805eb348>] (gic_handle_irq) from [<80301a78>] (__irq_svc+0x58/0x8c)
Tested-on: QCN6122 hw1.0 AHB WLAN.HK.2.6.0.1-00851-QCAHKSWPL_SILICONZ-1
Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1649396345-349-1-git-send-email-quic_haric@quicinc.com
|
|
Currently, WBM idle ring HP is updated much before the shadow
configuration is sent to the FW. Any update to the shadow
registers before FW mode on request would not be reflected
on to the actual HW registers failing to bring up the device.
Send FW mode ON QMI request before WBM idle ring HP update
to fix this problem.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220406094107.17878-12-quic_mpubbise@quicinc.com
|
|
WCN6750 is a single PDEV non-DBS chip which supports 2G, 5G and 6G bands.
It is a single LMAC device which can be either hooked to 2G/5G/6G bands.
Add WMI changes to support WCN6750.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220406094107.17878-11-quic_mpubbise@quicinc.com
|
|
Though WCN6750 is a single PDEV device, it is not a
DBS solution. So, do not put HW in DBS mode for WCN6750.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220406094107.17878-10-quic_mpubbise@quicinc.com
|
|
To avoid AUX timeouts and subsequent spurious hotplug interrupts, make
sure that the first DPCD access during detection is a read from an LTTPR
register.
Some ADLP DP link configuration at least with multiple LTTPRs expects
the first DPCD access during the LTTPR/DPCD detection after hotplug to
be a read from the LTTPR range starting with
DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV. The side effect of
this read is to put each LTTPR into the LTTPR transparent or LTTPR
non-transparent mode.
The lack of the above read may leave some of the LTTPRs in non-LTTPR
mode, while other LTTPRs in LTTPR transparent or LTTPR non-transparent
mode (for instance LTTPRs after system suspend/resume that kept their
mode from before suspend). Due to the different AUX timeouts the
different modes imply, the DPCD access from a non-LTTPR range will
timeout and lead to an LTTPR generated hotplug towards the source (which
the LTTPR firmware uses to account for buggy TypeC adapters with a long
wake-up delay).
SYSCROS: 72939
v2: Keep DPCD read-out working on non-LTTPR platforms.
v3: Summarize what and why the patch does at the beginning of the commit
log. (Jani)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220408224629.845887-1-imre.deak@intel.com
|
|
Add a format helper that converts RGB565 to XRGB8888. Use this
function in drm_fb_blit_toio(). Fixes simpledrm output for this
combination of formats.
UEFI and/or Grub will usually set 32-bit output in XRGB8888 format.
The issue can be reproduced by enabling simpledrm and requesting a
console framebuffer of different format on the kernel command line;
for example
nomodeset video=1024x768-16
In this case, conversion helpers will display nothing on the console.
The patch makes this work by implementing the rsp conversion helpers.
It also enables odd userspace configurations, such as running Xorg
with 16-bit color depth on a 32-bit output buffer.
v2:
* use helpers for struct drm_rect (Javier)
* improve commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425075939.30450-4-tzimmermann@suse.de
|
|
Add a format helper that converts RGB888 to XRGB8888. Use this
function in drm_fb_blit_toio(). Fixes simpledrm output for this
combination of formats.
UEFI and/or Grub will usually set 32-bit output in XRGB8888 format.
The issue can be reproduced by enabling simpledrm and requesting a
console framebuffer of different format on the kernel command line;
for example
nomodeset video=1024x768-24
In this case, conversion helpers will display nothing on the console.
The patch makes this work by implementing the rsp conversion helpers.
It also enables odd userspace configurations, such as running Xorg
with 24-bit color depth on a 32-bit output buffer.
v2:
* use helpers for struct drm_rect (Javier)
* improve commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425075939.30450-3-tzimmermann@suse.de
|
|
Not all possible format conversions are supported yet. Print a
warning on unsupported combinations.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425075939.30450-2-tzimmermann@suse.de
|
|
Adds a simple test of some basic matrix multiply assist (MMA)
instructions.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200622021832.15870-1-alistair@popple.id.au
|
|
Fix the following coccicheck warning:
drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c:1604:2-4:
WARNING: possible condition with no effect (if == else).
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220425031725.5808-1-guozhengkui@vivo.com
|
|
This uses ISO3166 country code and 0 rev on brcmfmac43602 chips.
Without this patch 80 MHz width is not selected on 5 GHz channels.
Commit a21bf90e927f ("brcmfmac: use ISO3166 country code and 0 rev as
fallback on some devices") provides a way to specify chips for using the
fallback case.
Before commit 151a7c12c4fc ("Revert "brcmfmac: use ISO3166 country code
and 0 rev as fallback"") brcmfmac43602 devices works correctly and for
this specific case 80 MHz width is selected.
Signed-off-by: Hamid Zamani <hzamani.cs91@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220423111237.60892-1-hzamani.cs91@gmail.com
|
|
Using not existing queues can panic the kernel with rtl8180/rtl8185 cards.
Ignore the skb priority for those cards, they only have one tx queue. Pierre
Asselin (pa@panix.com) reported the kernel crash in the Gentoo forum:
https://forums.gentoo.org/viewtopic-t-1147832-postdays-0-postorder-asc-start-25.html
He also confirmed that this patch fixes the issue. In summary this happened:
After updating wpa_supplicant from 2.9 to 2.10 the kernel crashed with a
"divide error: 0000" when connecting to an AP. Control port tx now tries to
use IEEE80211_AC_VO for the priority, which wpa_supplicants starts to use in
2.10.
Since only the rtl8187se part of the driver supports QoS, the priority
of the skb is set to IEEE80211_AC_BE (2) by mac80211 for rtl8180/rtl8185
cards.
rtl8180 is then unconditionally reading out the priority and finally crashes on
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c line 544 without this
patch:
idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries
"ring->entries" is zero for rtl8180/rtl8185 cards, tx_ring[2] never got
initialized.
Cc: stable@vger.kernel.org
Reported-by: pa@panix.com
Tested-by: pa@panix.com
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220422145228.7567-1-alexander@wetzel-home.de
|
|
Write the BIT_USB_SUS_DIS bit rather than BIT_BT_DIG_CLK_EN to the
REG_HCI_OPT_CTRL register for fixing failure to PCIe power on.
Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/YmLAzuyPr0P4Y6BP@ns.kevlo.org
|
|
With a recent change now it is possible to detect the strapping
option on SD8997, which allows to pick up a correct firmware
for either SDIO-SDIO or SDIO-UART.
This commit enables SDIO-UART firmware on SD8997.
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220422090313.125857-3-andrejs.cainikovs@toradex.com
|
|
Some WiFi/Bluetooth modules might have different host connection
options, allowing to either use SDIO for both WiFi and Bluetooth,
or SDIO for WiFi and UART for Bluetooth. It is possible to detect
whether a module has SDIO-SDIO or SDIO-UART connection by reading
its host strap register.
This change introduces a way to automatically select appropriate
firmware depending of the connection method, and removes a need
of symlinking or overwriting the original firmware file with a
required one.
Host strap register used in this commit comes from the NXP driver [1]
hosted at Code Aurora.
[1] https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/net/wireless/nxp/mxm_wifiex/wlan_src/mlinux/moal_sdio_mmc.c?h=rel_imx_5.4.70_2.3.2&id=688b67b2c7220b01521ffe560da7eee33042c7bd#n1274
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220422090313.125857-2-andrejs.cainikovs@toradex.com
|
|
Fix following coccicheck error:
drivers/cpufreq/mediatek-cpufreq.c:464:16-23: ERROR: info is NULL but dereferenced.
Use pr_err instead of dev_err to avoid dereferring a NULL pointer.
Fixes: f52b16ba9fe4 ("cpufreq: mediatek: Use device print to show logs")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
qcom-cpufreq-nvmem no longer uses SMEM. Remove all references
to SMEM and change the description and maximum value of
opp-supported-hw to reflect the new set of possible values.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Currently the boot wrapper lacks a -mcpu option, so it will be built for
the toolchain's default cpu. This is a problem if the toolchain defaults
to a cpu with newer instructions.
We could wire in TARGET_CPU but instead use the oldest supported option
so the wrapper runs anywhere.
The GCC documentation stays that -mcpu=powerpc64le will give us a
generic 64 bit powerpc machine:
-mcpu=powerpc, -mcpu=powerpc64, and -mcpu=powerpc64le specify pure
32-bit PowerPC (either endian), 64-bit big endian PowerPC and 64-bit
little endian PowerPC architecture machine types, with an appropriate,
generic processor model assumed for scheduling purposes.
So do that for each of the three machines.
This bug was found when building the kernel with a toolchain that
defaulted to powre10, resulting in a pcrel enabled wrapper which fails
to link:
arch/powerpc/boot/wrapper.a(crt0.o): in function `p_base':
(.text+0x150): call to `platform_init' lacks nop, can't restore toc; (toc save/adjust stub)
(.text+0x154): call to `start' lacks nop, can't restore toc; (toc save/adjust stub)
powerpc64le-buildroot-linux-gnu-ld: final link failed: bad value
Even with tha bug worked around the resulting kernel would crash on a
power9 box:
$ qemu-system-ppc64 -nographic -nodefaults -M powernv9 -kernel arch/powerpc/boot/zImage.epapr -serial mon:stdio
[ 7.069331356,5] INIT: Starting kernel at 0x20010020, fdt at 0x3068c628 25694 bytes
[ 7.130374661,3] ***********************************************
[ 7.131072886,3] Fatal Exception 0xe40 at 00000000200101e4 MSR 9000000000000001
[ 7.131290613,3] CFAR : 000000002001027c MSR : 9000000000000001
[ 7.131433759,3] SRR0 : 0000000020010050 SRR1 : 9000000000000001
[ 7.131577775,3] HSRR0: 00000000200101e4 HSRR1: 9000000000000001
[ 7.131733687,3] DSISR: 00000000 DAR : 0000000000000000
[ 7.131905162,3] LR : 0000000020010280 CTR : 0000000000000000
[ 7.132068356,3] CR : 44002004 XER : 00000000
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://github.com/linuxppc/issues/issues/400
Link: https://lore.kernel.org/r/20220330112437.540214-1-joel@jms.id.au
|
|
We should check unused fields for non-zero and -EINVAL if they are set,
making it consistent with other opcodes.
Fixes: aa1fa28fc73e ("io_uring: add support for recvmsg()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We should check unused fields for non-zero and -EINVAL if they are set,
making it consistent with other opcodes.
Fixes: 0fa03c624d8f ("io_uring: add support for sendmsg()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If no handler is found in lpfc_complete_unsol_iocb() to match the rctl of a
received frame, the frame is dropped and resources are leaked.
Fix by returning resources when discarding an unhandled frame type. Update
lpfc_fc_frame_check() handling of NOP basic link service.
Link: https://lore.kernel.org/r/20220426181419.9154-1-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Smatch had the following warning:
drivers/scsi/lpfc/lpfc_sli.c:22305 lpfc_sli_prep_wqe() error: we previously assumed 'ndlp' could be null (see line 22298)
Remove the unnecessary null check.
Link: https://lore.kernel.org/r/20220426181315.8990-1-jsmart2021@gmail.com
Fixes: d51cf5bd926c ("scsi: lpfc: Fix field overload in lpfc_iocbq data structure")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync() and
pm_runtime_put_noidle(). This change is just to simplify the code, no
actual functional changes.
Link: https://lore.kernel.org/r/20220420090353.2588804-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining
GSWIP_MII_CFG bits") added all known bits in the GSWIP_MII_CFGp
register. It helped bring this register into a well-defined state so the
driver has to rely less on the bootloader to do things right.
Unfortunately it also sets the GSWIP_MII_CFG_RMII_CLK bit without any
possibility to configure it. Upon further testing it turns out that all
boards which are supported by the GSWIP driver in OpenWrt which use an
RMII PHY have a dedicated oscillator on the board which provides the
50MHz RMII reference clock.
Don't set the GSWIP_MII_CFG_RMII_CLK bit (but keep the code which always
clears it) to fix support for the Fritz!Box 7362 SL in OpenWrt. This is
a board with two Atheros AR8030 RMII PHYs. With the "RMII clock" bit set
the MAC also generates the RMII reference clock whose signal then
conflicts with the signal from the oscillator on the board. This results
in a constant cycle of the PHY detecting link up/down (and as a result
of that: the two ports using the AR8030 PHYs are not working).
At the time of writing this patch there's no known board where the MAC
(GSWIP) has to generate the RMII reference clock. If needed this can be
implemented in future by providing a device-tree flag so the
GSWIP_MII_CFG_RMII_CLK bit can be toggled per port.
Fixes: 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits")
Tested-by: Jan Hoffmann <jan@3e8.eu>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://lore.kernel.org/r/20220425152027.2220750-1-martin.blumenstingl@googlemail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The macro dev_core_stats_##FIELD##_inc() disables preemption and invokes
netdev_core_stats_alloc() to return a per-CPU pointer.
netdev_core_stats_alloc() will allocate memory on its first invocation
which breaks on PREEMPT_RT because it requires non-atomic context for
memory allocation.
This can be avoided by enabling preemption in netdev_core_stats_alloc()
assuming the caller always disables preemption.
It might be better to replace local_inc() with this_cpu_inc() now that
dev_core_stats_##FIELD##_inc() gained a preempt-disable section and does
not rely on already disabled preemption. This results in less
instructions on x86-64:
local_inc:
| incl %gs:__preempt_count(%rip) # __preempt_count
| movq 488(%rdi), %rax # _1->core_stats, _22
| testq %rax, %rax # _22
| je .L585 #,
| add %gs:this_cpu_off(%rip), %rax # this_cpu_off, tcp_ptr__
| .L586:
| testq %rax, %rax # _27
| je .L587 #,
| incq (%rax) # _6->a.counter
| .L587:
| decl %gs:__preempt_count(%rip) # __preempt_count
this_cpu_inc(), this patch:
| movq 488(%rdi), %rax # _1->core_stats, _5
| testq %rax, %rax # _5
| je .L591 #,
| .L585:
| incq %gs:(%rax) # _18->rx_dropped
Use unsigned long as type for the counter. Use this_cpu_inc() to
increment the counter. Use a plain read of the counter.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/YmbO0pxgtKpCw4SY@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix spelling in comment.
Fixes: 94abdad6974a ("net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chip")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Link: https://lore.kernel.org/r/20220425154856.169499-1-marcel@ziswiler.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The masking for PAC bits wasn't handling 32-bit architectures correctly.
Replace the u64 cast with uintptr_t.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/lkml/CAMuHMdVz-J-1ZQ08u0bsQihDkcRmEPrtX5B_oRJ+Ns5jrasnUw@mail.gmail.com
Fixes: 2e53b877dc12 ("lkdtm: Add CFI_BACKWARD to test ROP mitigations")
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The only remaining definitions of __SLOW_DOWN_IO (for alpha and ia64) do
nothing, and the only mentions in networking are in comments. Remove these
mentions.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
atp.h is included only by atp.c, which does not use eeprom_delay(). Remove
the unused definition.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When NIC takes care of crypto (or the record has already
been decrypted) we forget to update darg->async. ->async
is supposed to mean whether record is async capable on
input and whether record has been queued for async crypto
on output.
Reported-by: Gal Pressman <gal@nvidia.com>
Fixes: 3547a1f9d988 ("tls: rx: use async as an in-out argument")
Tested-by: Gal Pressman <gal@nvidia.com>
Link: https://lore.kernel.org/r/20220425233309.344858-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Golle reports that the conversion of mt753x to phylink PCS caused
an oops as below.
The problem is with the placement of the PCS initialisation, which
occurs after mt7531_setup() has been called. However, burited in this
function is a call to setup the CPU port, which requires the PCS
structure to be already setup.
Fix this by changing the initialisation order.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Mem abort info:
ESR = 0x96000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005
CM = 0, WnR = 0
user pgtable: 4k pages, 39-bit VAs, pgdp=0000000046057000
[0000000000000020] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
Internal error: Oops: 96000005 [#1] SMP
Modules linked in:
CPU: 0 PID: 32 Comm: kworker/u4:1 Tainted: G S 5.18.0-rc3-next-20220422+ #0
Hardware name: Bananapi BPI-R64 (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mt7531_cpu_port_config+0xcc/0x1b0
lr : mt7531_cpu_port_config+0xc0/0x1b0
sp : ffffffc008d5b980
x29: ffffffc008d5b990 x28: ffffff80060562c8 x27: 00000000f805633b
x26: ffffff80001a8880 x25: 00000000000009c4 x24: 0000000000000016
x23: ffffff8005eb6470 x22: 0000000000003600 x21: ffffff8006948080
x20: 0000000000000000 x19: 0000000000000006 x18: 0000000000000000
x17: 0000000000000001 x16: 0000000000000001 x15: 02963607fcee069e
x14: 0000000000000000 x13: 0000000000000030 x12: 0101010101010101
x11: ffffffc037302000 x10: 0000000000000870 x9 : ffffffc008d5b800
x8 : ffffff800028f950 x7 : 0000000000000001 x6 : 00000000662b3000
x5 : 00000000000002f0 x4 : 0000000000000000 x3 : ffffff800028f080
x2 : 0000000000000000 x1 : ffffff800028f080 x0 : 0000000000000000
Call trace:
mt7531_cpu_port_config+0xcc/0x1b0
mt753x_cpu_port_enable+0x24/0x1f0
mt7531_setup+0x49c/0x5c0
mt753x_setup+0x20/0x31c
dsa_register_switch+0x8bc/0x1020
mt7530_probe+0x118/0x200
mdio_probe+0x30/0x64
really_probe.part.0+0x98/0x280
__driver_probe_device+0x94/0x140
driver_probe_device+0x40/0x114
__device_attach_driver+0xb0/0x10c
bus_for_each_drv+0x64/0xa0
__device_attach+0xa8/0x16c
device_initial_probe+0x10/0x20
bus_probe_device+0x94/0x9c
deferred_probe_work_func+0x80/0xb4
process_one_work+0x200/0x3a0
worker_thread+0x260/0x4c0
kthread+0xd4/0xe0
ret_from_fork+0x10/0x20
Code: 9409e911 937b7e60 8b0002a0 f9405800 (f9401005)
---[ end trace 0000000000000000 ]---
Reported-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Fixes: cbd1f243bc41 ("net: dsa: mt7530: partially convert to phylink_pcs")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/E1nj6FW-007WZB-5Y@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for a new kind of kunit_suite registration macro called
kunit_test_init_section_suite(); this new registration macro allows the
registration of kunit_suites that reference functions marked __init and
data marked __initdata.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Martin Fernandez <martin.fernandez@eclypsium.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Logic added in commit f35f821935d8 ("tcp: defer skb freeing after socket
lock is released") helped bulk TCP flows to move the cost of skbs
frees outside of critical section where socket lock was held.
But for RPC traffic, or hosts with RFS enabled, the solution is far from
being ideal.
For RPC traffic, recvmsg() has to return to user space right after
skb payload has been consumed, meaning that BH handler has no chance
to pick the skb before recvmsg() thread. This issue is more visible
with BIG TCP, as more RPC fit one skb.
For RFS, even if BH handler picks the skbs, they are still picked
from the cpu on which user thread is running.
Ideally, it is better to free the skbs (and associated page frags)
on the cpu that originally allocated them.
This patch removes the per socket anchor (sk->defer_list) and
instead uses a per-cpu list, which will hold more skbs per round.
This new per-cpu list is drained at the end of net_action_rx(),
after incoming packets have been processed, to lower latencies.
In normal conditions, skbs are added to the per-cpu list with
no further action. In the (unlikely) cases where the cpu does not
run net_action_rx() handler fast enough, we use an IPI to raise
NET_RX_SOFTIRQ on the remote cpu.
Also, we do not bother draining the per-cpu list from dev_cpu_dead()
This is because skbs in this list have no requirement on how fast
they should be freed.
Note that we can add in the future a small per-cpu cache
if we see any contention on sd->defer_lock.
Tested on a pair of hosts with 100Gbit NIC, RFS enabled,
and /proc/sys/net/ipv4/tcp_rmem[2] tuned to 16MB to work around
page recycling strategy used by NIC driver (its page pool capacity
being too small compared to number of skbs/pages held in sockets
receive queues)
Note that this tuning was only done to demonstrate worse
conditions for skb freeing for this particular test.
These conditions can happen in more general production workload.
10 runs of one TCP_STREAM flow
Before:
Average throughput: 49685 Mbit.
Kernel profiles on cpu running user thread recvmsg() show high cost for
skb freeing related functions (*)
57.81% [kernel] [k] copy_user_enhanced_fast_string
(*) 12.87% [kernel] [k] skb_release_data
(*) 4.25% [kernel] [k] __free_one_page
(*) 3.57% [kernel] [k] __list_del_entry_valid
1.85% [kernel] [k] __netif_receive_skb_core
1.60% [kernel] [k] __skb_datagram_iter
(*) 1.59% [kernel] [k] free_unref_page_commit
(*) 1.16% [kernel] [k] __slab_free
1.16% [kernel] [k] _copy_to_iter
(*) 1.01% [kernel] [k] kfree
(*) 0.88% [kernel] [k] free_unref_page
0.57% [kernel] [k] ip6_rcv_core
0.55% [kernel] [k] ip6t_do_table
0.54% [kernel] [k] flush_smp_call_function_queue
(*) 0.54% [kernel] [k] free_pcppages_bulk
0.51% [kernel] [k] llist_reverse_order
0.38% [kernel] [k] process_backlog
(*) 0.38% [kernel] [k] free_pcp_prepare
0.37% [kernel] [k] tcp_recvmsg_locked
(*) 0.37% [kernel] [k] __list_add_valid
0.34% [kernel] [k] sock_rfree
0.34% [kernel] [k] _raw_spin_lock_irq
(*) 0.33% [kernel] [k] __page_cache_release
0.33% [kernel] [k] tcp_v6_rcv
(*) 0.33% [kernel] [k] __put_page
(*) 0.29% [kernel] [k] __mod_zone_page_state
0.27% [kernel] [k] _raw_spin_lock
After patch:
Average throughput: 73076 Mbit.
Kernel profiles on cpu running user thread recvmsg() looks better:
81.35% [kernel] [k] copy_user_enhanced_fast_string
1.95% [kernel] [k] _copy_to_iter
1.95% [kernel] [k] __skb_datagram_iter
1.27% [kernel] [k] __netif_receive_skb_core
1.03% [kernel] [k] ip6t_do_table
0.60% [kernel] [k] sock_rfree
0.50% [kernel] [k] tcp_v6_rcv
0.47% [kernel] [k] ip6_rcv_core
0.45% [kernel] [k] read_tsc
0.44% [kernel] [k] _raw_spin_lock_irqsave
0.37% [kernel] [k] _raw_spin_lock
0.37% [kernel] [k] native_irq_return_iret
0.33% [kernel] [k] __inet6_lookup_established
0.31% [kernel] [k] ip6_protocol_deliver_rcu
0.29% [kernel] [k] tcp_rcv_established
0.29% [kernel] [k] llist_reverse_order
v2: kdoc issue (kernel bots)
do not defer if (alloc_cpu == smp_processor_id()) (Paolo)
replace the sk_buff_head with a single-linked list (Jakub)
add a READ_ONCE()/WRITE_ONCE() for the lockless read of sd->defer_list
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220422201237.416238-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Arınç ÜNAL
Philipp Hortmann
Marc Bonnici
Imran Khan
Won Chung
Sergey Shtylyov
Miaohe Lin
Mark-PK Tsai
Tom Rix
Abhinav Kumar
Cixi Geng
Wan Jiabing
Wen Gong
Hari Chandrakanthan
Manikanta Pubbisetty
Imre Deak
Thomas Zimmermann
Alistair Popple
Guo Zhengkui
Hamid Zamani
Alexander Wetzel
Kevin Lo
Andrejs Cainikovs
Yassine Oudjana
Joel Stanley
Jens Axboe
James Smart
Minghao Chi
Martin Blumenstingl
Sebastian Andrzej Siewior
Marcel Ziswiler
Kees Cook
Bjorn Helgaas
Jakub Kicinski
Russell King (Oracle)
Brendan Higgins
Eric Dumazet