aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-04-26drm/msm/disp/dpu1: Add DSC support in RMVinod Koul3-0/+58
This add the bits in RM to enable the DSC blocks Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480928/ Link: https://lore.kernel.org/r/20220406094031.1027376-12-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/disp/dpu1: Add support for DSC in topologyVinod Koul2-0/+15
For DSC to work we typically need a 2,2,1 configuration. This should suffice for resolutions up to 4k. For more resolutions like 8k this won't work. Also, it is better to use 2 LMs and DSC instances as half width results in lesser power consumption as compared to single LM, DSC at full width. The panel has been tested only with 2,2,1 configuration, so for now we blindly create 2,2,1 topology when DSC is enabled Co-developed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480925/ Link: https://lore.kernel.org/r/20220406094031.1027376-11-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: Add missing num_dspp field documentationVinod Koul1-0/+1
Somehow documentation for num_dspp was missed, so add that Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480924/ Link: https://lore.kernel.org/r/20220406094031.1027376-10-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/dpu: don't use merge_3d if DSC merge topology is usedDmitry Baryshkov3-1/+25
DPU supports different topologies for the case when multiple INTFs are being driven by the single phys_enc. The driver defaults to using 3DMux in such cases. Don't use it if DSC merge is used instead. Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/480922/ Link: https://lore.kernel.org/r/20220406094031.1027376-9-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/disp/dpu1: Add support for DSC in encoderVinod Koul2-1/+135
We need to configure the encoder for DSC configuration and calculate DSC parameters for the given timing so this patch adds that support by adding dpu_encoder_prep_dsc() which is invoked when DSC is enabled. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480920/ Link: https://lore.kernel.org/r/20220406094031.1027376-8-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/disp/dpu1: Add DSC support in hw_ctlVinod Koul2-1/+12
Later gens of hardware have DSC bits moved to hw_ctl, so configure these bits so that DSC would work there as well Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480918/ Link: https://lore.kernel.org/r/20220406094031.1027376-7-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/disp/dpu1: Add DSC for SDM845 to hw_catalogVinod Koul1-0/+20
This adds SDM845 DSC blocks into hw_catalog Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480916/ Link: https://lore.kernel.org/r/20220406094031.1027376-6-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/disp/dpu1: Add support for DSC in pingpong blockVinod Koul2-0/+46
In SDM845, DSC can be enabled by writing to pingpong block registers, so add support for DSC in hw_pp Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480914/ Link: https://lore.kernel.org/r/20220406094031.1027376-5-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/disp/dpu1: Add support for DSCVinod Koul5-0/+322
Display Stream Compression (DSC) is one of the hw blocks in dpu, so add support by adding hw blocks for DSC Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480912/ Link: https://lore.kernel.org/r/20220406094031.1027376-4-vkoul@kernel.org [DB: applied typo noticed by Robert Foss] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-25dt-bindings: timer: Add compatible for am6 for TI timer-dmTony Lindgren1-1/+11
Let's add compatible for ti,am654-timer for TI am64, am65 and j72 SoCs. As the timer hardware is the same between am64, am65 and j72 we use the compatible name for the earliest SoC with this timer. The timer interrupts are not routable for the operating system for some timers on am6. Let's make sure the interrupts are configured for the timers on all other SoCs. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220414085807.7389-3-tony@atomide.com
2022-04-25dt-bindings: timer: Update TI timer to yamlTony Lindgren3-45/+143
Let's update the TI timer binding to use yaml. As this binding is specific to the TI dual-mode timers also known as dm-timers, let's use file name ti,timer-dm.yaml to avoid confusion with other timers. We add checks for the deprecated ti,hwmods property as done for other TI device driver bindings earlier. We also correct the issue with the old binding that was out of date for several properties. The am43 related timers are undocumented, but compatible with the am3 timers. Let's add the am43 timers too. The dm814 and dm816 timers are missing, let's add them. Some timers on some SoCs are dual mapped, like the ABE timers on omap4 and 5. The reg property maxItems must be updated to 2. The timer clocks can be managed by the parent interconnect target module with no clocks assigned for the timer node. And in some cases, the SoC may need to configure additional system clock for the timer in addition to the functional clock. The clock names are optional and not specific to the comptible property. For example, dra7 timers on l3 interconnect do not need clock-names, while the timers on dra7 l4 interconnect need them with both being compatible with ti,omap5430-timer. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220414085807.7389-2-tony@atomide.com
2022-04-26drm/msm/dsi: Pass DSC params to drm_panelVinod Koul7-0/+45
When DSC is enabled, we need to get the DSC parameters from the panel driver, so add a dsc parameter in panel to fetch and pass DSC configuration for DSI panels to DPU encoder, which will enable and then configure DSC hardware blocks accordingly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480910/ Link: https://lore.kernel.org/r/20220406094031.1027376-3-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/dsi: add support for dsc dataVinod Koul2-0/+136
Display Stream Compression (DSC) parameters need to be calculated. Add helpers and struct msm_display_dsc_config in msm_drv for this msm_display_dsc_config uses drm_dsc_config for DSC parameters. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480908/ Link: https://lore.kernel.org/r/20220406094031.1027376-2-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/dp: enable widebus feature for display portKuogee Hsieh8-5/+71
Widebus feature will transmit two pixel data per pixel clock to interface. This feature now is required to be enabled to easy migrant to higher resolution applications in future. However since some legacy chipsets does not support this feature, this feature is enabled by setting wide_bus_en flag to true within msm_dp_desc struct. changes in v2: -- remove compression related code from timing -- remove op_info from struct msm_drm_private -- remove unnecessary wide_bus_en variables -- pass wide_bus_en into timing configuration by struct msm_dp Changes in v3: -- split patch into 3 patches -- enable widebus feature base on chip hardware revision Changes in v5: -- DP_INTF_CONFIG_DATABUS_WIDEN Changes in v6: -- static inline bool msm_dp_wide_bus_enable() in msm_drv.h Changes in v7: -- add Tested-by Changes in v9: -- add wide_bus_en to msm_dp_desc Changes in v10: -- add wide_bus_en boolean to dp_catalog struc to avoid passing it as parameter Changes in v11: -- add const to dp_catalog_hw_revision() -- add const to msm_dp_wide_bus_available() Changes in v12: -- dp_catalog_hw_revision(const struct dp_catalog *dp_catalog) -- msm_dp_wide_bus_available(const struct msm_dp *dp_display) Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reported-by: kernel test robot <lkp@intel.com> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/476283/ Link: https://lore.kernel.org/r/1645824192-29670-5-git-send-email-quic_khsieh@quicinc.com [DB: fixed the compilation] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/dpu: revise timing engine programming to support widebus featureKuogee Hsieh5-14/+67
Widebus feature will transmit two pixel data per pixel clock to interface. Timing engine provides driving force for this purpose. This patch base on HPG (Hardware Programming Guide) to revise timing engine register setting to accommodate both widebus and non widebus application. Also horizontal width parameters need to be reduced by half since two pixel data are clocked out per pixel clock when widebus feature enabled. Widebus can be enabled individually at DP. However at DSI, widebus have to be enabled along with DSC to achieve pixel clock rate be scaled down with same ratio as compression ratio when 10 bits per source component. Therefore this patch add no supports of DSI related widebus and compression. Changes in v2: -- remove compression related code from timing -- remove op_info from struct msm_drm_private -- remove unnecessary wide_bus_en variables -- pass wide_bus_en into timing configuration by struct msm_dp Changes in v3: -- split patch into 3 patches Changes in v4: -- rework timing engine to not interfere with dsi/hdmi -- cover both widebus and compression Changes in v5: -- remove supports of DSI widebus and compression Changes in v7: -- split this patch into 3 patches -- add Tested-by Changes in v8: -- move new registers writes under DATA_HCTL_EN features check. Changes in v10: -- add const inside dpu_encoder_is_widebus_enabled() -- drop useless parenthesis please Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/476281/ Link: https://lore.kernel.org/r/1645824192-29670-4-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/dpu: replace BIT(x) with correspond marco define stringKuogee Hsieh1-3/+9
To improve code readability, this patch replace BIT(x) with correspond register bit define string Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/476280/ Link: https://lore.kernel.org/r/1645824192-29670-3-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/dpu: adjust display_v_end for eDP and DPKuogee Hsieh1-0/+1
The “DP timing” requires the active region to be defined in the bottom-right corner of the frame dimensions which is different with DSI. Therefore both display_h_end and display_v_end need to be adjusted accordingly. However current implementation has only display_h_end adjusted. Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Fixes: fc3a69ec68d3 ("drm/msm/dpu: intf timing path for displayport") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/476277/ Link: https://lore.kernel.org/r/1645824192-29670-2-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: remove unused plane_property field from msm_drm_privateDmitry Baryshkov1-10/+0
Remove unused field plane_property from struct msm_drm_private. Also drop the enum msm_mdp_plane_property which also becomes unused. Fixes: 7d36db0be3b9 ("drm/msm/mdp5: switch to standard zpos property") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/480939/ Link: https://lore.kernel.org/r/20220406100556.479706-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: don't store created planes, connectors and encodersDmitry Baryshkov7-34/+13
There is no point now in storing arrays of creates planes, connectors and encoders. Remove them from struct msm_drm_private. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/480945/ Link: https://lore.kernel.org/r/20220406101247.483649-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: loop over encoders using drm_for_each_encoder()Dmitry Baryshkov2-6/+5
Rather than manually looping over encoders array, use standard drm_for_each_encoder() macro. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/480942/ Link: https://lore.kernel.org/r/20220406101247.483649-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/dpu: remove manual destruction of DRM objectsDmitry Baryshkov1-30/+3
Remove manual removal of DRM modesetting objects, it is done anyway by the drm_mode_config_cleanup() called from msm_drm_uninit(). Other MSM display drivers (MDP4, MDP5) do not manually destroy objects and trust generic code to do it's work. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/480943/ Link: https://lore.kernel.org/r/20220406101247.483649-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: properly add and remove internal bridgesDmitry Baryshkov4-0/+13
Add calls to drm_bridge_add()/drm_bridge_remove() DRM bridges created by the driver. This fixes the following warning. WARNING: CPU: 0 PID: 1 at kernel/locking/mutex.c:579 __mutex_lock+0x840/0x9f4 DEBUG_LOCKS_WARN_ON(lock->magic != lock) Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc1-00002-g3054695a0d27-dirty #55 Hardware name: Generic DT based system unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0xc8/0x1e8 __warn from warn_slowpath_fmt+0x78/0xa8 warn_slowpath_fmt from __mutex_lock+0x840/0x9f4 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from drm_bridge_hpd_enable+0x2c/0x84 drm_bridge_hpd_enable from msm_hdmi_modeset_init+0xc0/0x21c msm_hdmi_modeset_init from mdp4_kms_init+0x53c/0x90c mdp4_kms_init from msm_drm_bind+0x514/0x698 msm_drm_bind from try_to_bring_up_aggregate_device+0x160/0x1bc try_to_bring_up_aggregate_device from component_master_add_with_match+0xc4/0xf8 component_master_add_with_match from msm_pdev_probe+0x274/0x350 msm_pdev_probe from platform_probe+0x5c/0xbc platform_probe from really_probe.part.0+0x9c/0x290 really_probe.part.0 from __driver_probe_device+0xa8/0x13c __driver_probe_device from driver_probe_device+0x34/0x10c driver_probe_device from __driver_attach+0xbc/0x178 __driver_attach from bus_for_each_dev+0x74/0xc0 bus_for_each_dev from bus_add_driver+0x160/0x1e4 bus_add_driver from driver_register+0x88/0x118 driver_register from do_one_initcall+0x6c/0x334 do_one_initcall from kernel_init_freeable+0x1bc/0x220 kernel_init_freeable from kernel_init+0x18/0x12c kernel_init from ret_from_fork+0x14/0x2c Fixes: 3d3f8b1f8b62 ("drm/bridge: make bridge registration independent of drm flow") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/481778/ Link: https://lore.kernel.org/r/20220411234953.2425280-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: make mdp5/dpu devices master componentsDmitry Baryshkov7-183/+79
The msm_mdss serves several roles at this moment. It provides IRQ domain used by MDP5 and DPU drivers but it also serves as a component master for both those usecases. MDP4 (which does not have separate MDSS device) is the component master on it's own. Remove this assymmetry and make both MDP5 and DPU component masters too. This removes a need to care about drm/components from msm_mdss driver, removes an mdss pointer from struct msm_drm_private and simplifies the interface between mdp5/dpu and msm_drv. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/482512/ Link: https://lore.kernel.org/r/20220419155346.1272627-7-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: allow compile time selection of driver componentsDmitry Baryshkov6-11/+115
MSM DRM driver already allows one to compile out the DP or DSI support. Add support for disabling other features like MDP4/MDP5/DPU drivers or direct HDMI output support. Suggested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/482508/ Link: https://lore.kernel.org/r/20220419155346.1272627-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: stop using device's match data pointerDmitry Baryshkov7-69/+42
Let's make the match's data pointer a (sub-)driver's private data. The only user currently is the msm_drm_init() function, using this data to select kms_init callback. Pass this callback through the driver's private data instead. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/482510/ Link: https://lore.kernel.org/r/20220419155346.1272627-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: split the main platform driverDmitry Baryshkov5-205/+288
Currently the msm platform driver is a multiplex handling several cases: - headless GPU-only driver, - MDP4 with flat device nodes, - MDP5/DPU MDSS with all the nodes being children of MDSS node. This results in not-so-perfect code, checking the hardware version (MDP4/MDP5/DPU) in several places, checking for mdss even when it can not exist, etc. Split the code into three handling subdrivers (mdp4, mdss and headless msm). Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/482507/ Link: https://lore.kernel.org/r/20220419155346.1272627-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: remove extra indirection for msm_mdssDmitry Baryshkov3-102/+83
Since now there is just one mdss subdriver, drop all the indirection, make msm_mdss struct completely opaque (and defined inside msm_mdss.c) and call mdss functions directly. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/482505/ Link: https://lore.kernel.org/r/20220419155346.1272627-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: unify MDSS driversDmitry Baryshkov5-325/+93
MDP5 and DPU1 both provide the driver handling the MDSS region, which handles the irq domain and (incase of DPU1) adds some init for the UBWC controller. Unify those two pieces of code into a common driver. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/482506/ Link: https://lore.kernel.org/r/20220419155346.1272627-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-25bpftool, musl compat: Replace sys/fcntl.h by fcntl.hDominique Martinet1-1/+1
musl does not like including sys/fcntl.h directly: [...] 1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [...] Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20220424051022.2619648-5-asmadeus@codewreck.org
2022-04-25bpftool, musl compat: Replace nftw with FTW_ACTIONRETVALDominique Martinet1-53/+55
musl nftw implementation does not support FTW_ACTIONRETVAL. There have been multiple attempts at pushing the feature in musl upstream, but it has been refused or ignored all the times: https://www.openwall.com/lists/musl/2021/03/26/1 https://www.openwall.com/lists/musl/2022/01/22/1 In this case we only care about /proc/<pid>/fd/<fd>, so it's not too difficult to reimplement directly instead, and the new implementation makes 'bpftool perf' slightly faster because it doesn't needlessly stat/readdir unneeded directories (54ms -> 13ms on my machine). Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20220424051022.2619648-4-asmadeus@codewreck.org
2022-04-25md: Replace role magic numbers with defined constantsDavid Sloan1-5/+6
There are several instances where magic numbers are used in md.c instead of the defined constants in md_p.h. This patch set improves code readability by replacing all occurrences of 0xffff, 0xfffe, and 0xfffd when relating to md roles with their equivalent defined constant. Signed-off-by: David Sloan <david.sloan@eideticom.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-04-25selftests/x86/corrupt_xstate_header: Use provided __cpuid_count() macroReinette Chatre1-14/+2
kselftest.h makes the __cpuid_count() macro available to conveniently call the CPUID instruction. Remove the local CPUID wrapper and use __cpuid_count() from kselftest.h instead. __cpuid_count() from kselftest.h is used instead of the macro provided by the compiler since gcc v4.4 (via cpuid.h) because the selftest needs to be supported with gcc v3.2, the minimal required version for stable kernels. Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-04-25selftests/x86/amx: Use provided __cpuid_count() macroReinette Chatre1-17/+7
kselftest.h makes the __cpuid_count() macro available to conveniently call the CPUID instruction. Remove the local CPUID wrapper and use __cpuid_count() from kselftest.h instead. __cpuid_count() from kselftest.h is used instead of the macro provided by the compiler since gcc v4.4 (via cpuid.h) because the selftest needs to be supported with gcc v3.2, the minimal required version for stable kernels. Cc: Chang S. Bae <chang.seok.bae@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-04-25selftests/vm/pkeys: Use provided __cpuid_count() macroReinette Chatre1-19/+2
kselftest.h makes the __cpuid_count() macro available to conveniently call the CPUID instruction. Remove the local CPUID wrapper and use __cpuid_count() from already included kselftest.h instead. __cpuid_count() from kselftest.h is used instead of the macro provided by the compiler since gcc v4.4 (via cpuid.h) because the selftest needs to be compiled with gcc v3.2, the minimal required version for stable kernels. Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Suchanek <msuchanek@suse.de> Cc: linux-mm@kvack.org Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-04-25selftests: Provide local define of __cpuid_count()Reinette Chatre1-0/+15
Some selftests depend on information provided by the CPUID instruction. To support this dependency the selftests implement private wrappers for CPUID. Duplication of the CPUID wrappers should be avoided. Both gcc and clang/LLVM provide __cpuid_count() macros but neither the macro nor its header file are available in all the compiler versions that need to be supported by the selftests. __cpuid_count() as provided by gcc is available starting with gcc v4.4, so it is not available if the latest tests need to be run in all the environments required to support kernels v4.9 and v4.14 that have the minimal required gcc v3.2. Duplicate gcc's __cpuid_count() macro to provide a centrally defined macro for __cpuid_count() to help eliminate the duplicate CPUID wrappers while continuing to compile in older environments. Suggested-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-04-25drm/amd/display: 3.2.183Aric Cyr1-1/+1
This version brings along following fixes: - Keep tracking of DSC packed PPS for future use - Maintain current link settings in link loss interrupt - Remove DDC write and read size check - Read PSR-SU cap DPCD for specific panel - Don't pass HostVM by default on DCN3.1 - Reset cached PSR parameters after hibernate - Add audio readback registers - Update dcn315 clk table read Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-25drm/amd/display: Keep track of DSC packed PPSIlya Bakoulin2-1/+3
[Why] Store current packed PPS data in dc_stream_state for future use. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-25drm/amd/display: Remove unused integerDillon Varone1-1/+0
Integer no longer needed. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-25drm/amd/display: Maintain current link settings in link loss interruptGary Li1-0/+9
[Why] DP compliance test case 400.3.2.3 is failed because in link loss interrupt the current link settings is not used in the DP link training. [How] In link loss interrupt, use the current link settings in the following DP link training. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Gary Li <garyli12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-25drm/amd/display: Remove ddc write and read size checkingLeo Ma1-6/+0
[Why] Customer found I2C over AUX using ADL_Display_DDCBlockAccess_Get will fail when sending more than 256 bytes of data; [How] Remove the write and read size checking to allow sending data more than 256 bytes; Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-25drm/amd/display: read PSR-SU cap DPCD for specific panelDavid Zhang2-0/+6
[why & how] For some specific eDP panel, we'd check the PSR-SU cap during boot by reading the vendor specific DPCD, otherwise it will cause to false report the eDP panel which supports PSR-SU as an non-PSR-SU panel. - add the vendor specific DPCD address in ddc_service_types header - if specific eDP panel detected, check vendor specific DPCD for PSR-SU cap Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: David Zhang <dingchen.zhang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-25drm/amd/display: Don't pass HostVM by default on DCN3.1Michael Strauss2-1/+15
[WHY] Roll back previous change to stop passing this value by default, instead add a debug flag to override to previous behaviour (or force HostVM calcs) Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-25drm/amd/display: Reset cached PSR parameters after hibernateEvgenii Krasnikov1-1/+6
[WHY] After hibernate system might be using old invalid psr_power_opt and psr_allow_active that never get reset [HOW] Reset cached Panel Self Refresh parameters when PSR is first configured for eDP in dc_link_setup_psr. Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Evgenii Krasnikov <Evgenii.Krasnikov@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-25drm/amd/display: Add Audio readback registersIlya Bakoulin3-0/+13
[Why] Can be useful for verifying the correctness of audio output. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-25drm/amd/display: update dcn315 clk table readDmytro Laktyushkin3-149/+111
Clean up the sequence by making sure clk_mgr always builds a reasonable clock table regardless of what we read from smu by moving all defaults from resource soc struct to clk_mgr. Now the only thing resource soc update does is read the clock table and apply any DC specific policy decisions to how clocks are populated in dml soc. Reviewed-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-25drm/amd/display: 3.2.182Aric Cyr1-1/+1
This version brings along following improvements: - Fix HDCP QUERY Error for eDP and Tiled - Insert smu busy status before sending another request Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-25drm/amd/display: Fix HDCP QUERY Error for eDP and TiledMustapha Ghaddar1-2/+6
[WHY] For dio_output_encoder ID we are relying on SW concept which is invisible to HW [HOW] Needed to create separate cases for when DPIA and non DPIA for dio link encoder ID Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: James Zhang <james.zhang@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-25drm/amd/display: Insert smu busy status before sending another requestOliver Logush1-0/+2
[why] Need to check if result register is busy before sending another request [how] Call method to check if result register is busy Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Oliver Logush <oliver.logush@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-25drm/amdkfd: Ignore bogus signals from MEC efficientlyFelix Kuehling4-7/+60
MEC firmware sometimes sends signal interrupts without a valid context ID on end of pipe events that don't intend to signal any HSA signals. This triggers the slow path in kfd_signal_event_interrupt that scans the entire event page for signaled events. Detect these signals in the top half interrupt handler to stop processing them as early as possible. Because we now always treat event ID 0 as invalid, reserve that ID during process initialization. v2: Update firmware version checks to support more GPUs Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-25drm/amdgpu: Remove useless kfreeHaowen Bai1-1/+0
After alloc fail, we do not need to kfree. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.