| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This reverts commit a67a46af4ad6342378e332b7420c1d1a2818c53f.
It has been reported the warning is annoying as the cooling device
state is still needed on some production system.
Meanwhile we provide a way to consolidate the thermal framework to
prevent multiple actors acting on the cooling devices with conflicting
decisions, let's revert this warning.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In <db3b9e990e75573402cda22faf933760f076c033> ("Staging: VME: move VME
drivers out of staging") the vme code, board and bridge drivers were
moved out of the staging tree, remaining only the VME user device
driver.
Since this driver is the only one remaining in staging, such multi-level
structure confuses more than helps. The current structure is as follows:
- drivers/staging/vme/
Makefile
devices/
Kconfig
Makefile
vme_user.c
vme_user.h
The top-level Makefile has the only function of calling another Makefile
into the devices/ subdirectory. This latter only compiles the vme_user
driver, since there is no other in the staging tree.
This patch removes the unnecessary Makefile from the 'vme/' dir, move
the contents of 'vme/devices' into the 'vme/' dir, and renames it to
'vme_user/' (the driver name), allowing a straightforward understanding
of this driver's contents. Furthermore, it updates the MAINTAINERS file
to properly reflect the new paths.
Signed-off-by: Bruno Moreira-Guedes <codeagain@codeagain.dev>
Link: https://lore.kernel.org/r/2cd7de9a426c443a5ea618682d605ecfd751d798.1650544175.git.codeagain@codeagain.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The KConfig file for VME_USER ('drivers/staging/vme/devices/Kconfig')
sourced at "drivers/vme/boards/KConfig" misses a `depends on` line for
VME_BUS, which is unnoticeable for menuconfig users who aren't be able
to select it through this interface without setting the CONFIG_VME_BUS
option because it's nested on VME_BUS menu entry.
A patch to move appropriately this driver to the "Staging" submenu
([PATCH 1/3], originally sent as a single patch submitted at
https://lore.kernel.org/linux-staging/3fbc5325e94b9ae0666a1f5a56a4e5372bfcea1d.camel@codeagain.dev/T/#t),
however, unveiled this missing `depends on` line, since it moved the
`source` line for VME_USER's KConfig to somewhere else, allowing it to
be compiled without the support for VME_BUS. While it compiles fine and
seems to initialize the driver fine (tested both as module and as built-
in), it seems to make no sense having VME_USER without VME_BUS.
This patches addresses it by adding the VME_BUS to the `depends on` line
at "drivers/staging/vme/devices/Kconfig".
Signed-off-by: Bruno Moreira-Guedes <codeagain@codeagain.dev>
Link: https://lore.kernel.org/r/00de5644d7c2f8c8878eccf86b761e0602732089.1650544175.git.codeagain@codeagain.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, the VME_USER driver is in the staging tree Kconfig, unlike
other VME drivers already moved to the main portions of the kernel tree.
Its configuration is, however, nested into the VME_BUS config option,
which might be misleading.
Since the staging tree "[...] is used to hold stand-alone drivers and
filesystem that are not ready to be merged into the main portion of the
Linux kernel tree [...]"(from
https://lore.kernel.org/all/20090320172502.GA14647@kroah.com/T/),
staging drivers should appear nested into the Main Menu -> Device
Drivers -> Staging Drivers to make sure the user don't pick it without
being fully aware of its staging status as it could be the case in
Menu -> Device Drivers -> VME bridge support (the current location).
With this change menuconfig users will clearly know this is not a driver
in the main portion of the kernel tree and decide whether to build it or
not with that clearly in mind.
This change goes into the same direction of commit
<4b4cdf3979c32fa3d042d150f49449c74d048553> ("STAGING: Move staging
drivers back to staging-specific menu")
Signed-off-by: Bruno Moreira-Guedes <codeagain@codeagain.dev>
Link: https://lore.kernel.org/r/f6e6d1d2b02385f11848022f154007ef191181c1.1650544175.git.codeagain@codeagain.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update pwrap document description for mt8195
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220411022724.11005-2-tinghan.shen@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Use the in-kernel structure and flags instead of defining a separate
one. The rtw_ieee80211_channel structure and flags can be replaced by
the ieee80211_channel defined in include/net/cfg80211.h since the flags
serve the same purpose and the ieee80211_channel struct includes the
elements used in the rtw_ieee80211_channel struct.
Signed-off-by: Solomon Tan <wjsota@gmail.com>
Link: https://lore.kernel.org/r/20220421235237.4218-1-wjsota@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correct misspellings in the comments. Issue found with checkpatch.
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Link: https://lore.kernel.org/r/56b25e4394396823d52f1fe1b312c5a307aea0fc.1650568579.git.jhpark1013@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use tabs instead of spaces. Issue found with checkpatch.
WARNING: suspect code indent for conditional statements
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Link: https://lore.kernel.org/r/fd4a66013be081bc5adb491c6dc7774362d1ac82.1650568579.git.jhpark1013@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Author comments "Added by Albert" and "Added by Annie" are sprinkled
through the file. These comments are not useful and can be removed.
Suggested-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Link: https://lore.kernel.org/r/dd22bbe6b018aadec620d1ef8215e19852099f7c.1650568579.git.jhpark1013@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Delete spaces before tabs in the comments. Issue found with checkpatch.
WARNING: please, no space before tabs
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Link: https://lore.kernel.org/r/1b1e8cda03ca5d3fdf26c511da76258f7a2ab8d5.1650568579.git.jhpark1013@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove braces for single statement block to minimize the number of
empty lines, without loss of readability. Issue found with checkpatch.
WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Link: https://lore.kernel.org/r/b96ae957e2ddc519e56813a1c56e770168f67a2d.1650568579.git.jhpark1013@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the empty function OnAction_dls and its entry in OnAction_tbl.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220421200805.192083-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the empty function OnAction_qos and its entry in OnAction_tbl.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220421200805.192083-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
One of the entries in OnAction_tbl refers to on_action_spct. This function
reads some information but it performs no action. Remove on_action_spct
and its entry in OnAction_tbl.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220421200805.192083-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Unlike mlme_sta_tbl, OnAction_tbl is an array of structs.
OnAction iterates over the array to find the entry for a specific action
category. No action is performed if a category has no entry.
We can remove the entries that point to the dummy function DoReserved.
These were the last users of DoReserved, the function itself can be
removed as well.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220421200805.192083-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the empty OnAtim function. We can set the function pointer in
mlme_sta_tbl to NULL if no action is required for this management frame
subtype.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220421200449.191983-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The rtllib_rx_assoc_resp() function has a signedness bug because it's
a declared as a u16 but it return -ENOMEM. When you look at it more
closely it returns a mix of error codes including 0xcafe, -ENOMEM, and
a->status which is WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG. This is a mess.
Clean it up to just return standard kernel error codes. We can print
out the a->status before returning a regular error code. The printks
in the caller need to be adjusted as well.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Link: https://lore.kernel.org/r/1650529277-7893-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The region set by the call to memset is immediately overwritten by the
subsequent call to memcpy. So we drop redundant memset.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Link: https://lore.kernel.org/r/1650532843-28132-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Clean up unreferenced definitions in hal headers and code.
Signed-off-by: Artur Bujdoso <artur.bujdoso@gmail.com>
Link: https://lore.kernel.org/r/YmD/I19v8sJLrOQo@crux
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, these three get_key functions return -1 when the provided len
value is less a specific key length value, which can result in buffer
overflow depending on how the returned value is used. These functions are
used in three places in ieee80211/ieee80211_wx.c:
ieee80211_wx_get_encode() :
The behavior of this function will be unchanged.
ieee80211_wx_get_encode_ext() :
The result of the get_key function is written to ext->key_len,
resulting in a buffer overflow if the result is negative.
ieee80211_wx_set_encode() :
The behavior of this function will change. When len is less than the
key length value, it will set a default key of all 0.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Link: https://lore.kernel.org/r/Yl/7QPKXer7YtXOs@bertie
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add intel_rapl support for the RaptorLake platform.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The EndRun PTP/1588 dual serial port device is based on the Oxford
Semiconductor OXPCIe952 UART device with the PCI vendor:device ID set
for EndRun Technologies and is therefore driven by a fixed 62.5MHz clock
input derived from the 100MHz PCI Express clock. The clock rate is
divided by the oversampling rate of 16 as it is supplied to the baud
rate generator, yielding the baud base of 3906250.
Replace the incorrect baud base of 4000000 with the right value of
3906250 then, complementing commit 6cbe45d8ac93 ("serial: 8250: Correct
the clock for OxSemi PCIe devices").
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable <stable@kernel.org>
Fixes: 1bc8cde46a159 ("8250_pci: Added driver for Endrun Technologies PTP PCIe card.")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181515270.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sticky MCR bits are lost in console restoration if console suspending
has been disabled. This currently affects the AFE bit, which works in
combination with RTS which we set, so we want to make sure the UART
retains control of its FIFO where previously requested. Also specific
drivers may need other bits in the future.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 4516d50aabed ("serial: 8250: Use canary to restart console after suspend")
Cc: stable@vger.kernel.org # v4.0+
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181518490.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.8.1 states that XON/XOFF characters
shall be used instead of Fcon/Fcoff command in advanced option mode to
handle flow control. Chapter 5.4.8.2 describes how XON/XOFF characters
shall be handled. Basic option mode only used Fcon/Fcoff commands and no
XON/XOFF characters. These are treated as data bytes here.
The current implementation uses the gsm_mux field 'constipated' to handle
flow control from the remote peer and the gsm_dlci field 'constipated' to
handle flow control from each DLCI. The later is unrelated to this patch.
The gsm_mux field is correctly set for Fcon/Fcoff commands in
gsm_control_message(). However, the same is not true for XON/XOFF
characters in gsm1_receive().
Disable software flow control handling in the tty to allow explicit
handling by n_gsm.
Add the missing handling in advanced option mode for gsm_mux in
gsm1_receive() to comply with the standard.
This patch depends on the following commit:
Commit 8838b2af23ca ("tty: n_gsm: fix SW flow control encoding/handling")
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220422071025.5490-3-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.6.3.7 states that the Modem Status
Command (MSC) shall only be used if the basic option was chosen.
The current implementation uses MSC frames even if advanced option was
chosen to inform the peer about modem line state updates. A standard
conform peer may choose to discard these frames in advanced option mode.
Furthermore, gsmtty_modem_update() is not part of the 'tty_operations'
functions despite its name.
Rename gsmtty_modem_update() to gsm_modem_update() to clarify this. Split
its function into gsm_modem_upd_via_data() and gsm_modem_upd_via_msc()
depending on the encoding and adaption. Introduce gsm_dlci_modem_output()
as adaption of gsm_dlci_data_output() to encode and queue empty frames in
advanced option mode. Use it in gsm_modem_upd_via_data().
gsm_modem_upd_via_msc() is based on the initial gsmtty_modem_update()
function which used only MSC frames to update modem states.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220422071025.5490-2-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Dynamic virtual tty registration was introduced to allow the user to handle
these cases with uevent rules. The following commits relate to this:
Commit 5b87686e3203 ("tty: n_gsm: Modify gsmtty driver register method when config requester")
Commit 0b91b5332368 ("tty: n_gsm: Save dlci address open status when config requester")
Commit 46292622ad73 ("tty: n_gsm: clean up indenting in gsm_queue()")
However, the following behavior can be seen with this implementation:
- n_gsm ldisc is activated via ioctl
- all configuration parameters are set to their default value (initiator=0)
- the mux gets activated and attached and gsmtty0 is being registered in
in gsm_dlci_open() after DLCI 0 was established (DLCI 0 is the control
channel)
- the user configures n_gsm via ioctl GSMIOC_SETCONF as initiator
- this re-attaches the n_gsm mux
- no new gsmtty devices are registered in gsmld_attach_gsm() because the
mux is already active
- the initiator side registered only the control channel as gsmtty0
(which should never happen) and no user channel tty
The commits above make it impossible to operate the initiator side as no
user channel tty is or will be available.
On the other hand, this behavior will make it also impossible to allow DLCI
parameter negotiation on responder side in the future. The responder side
first needs to provide a device for the application before the application
can set its parameters of the associated DLCI via ioctl.
Note that the user application is still able to detect a link establishment
without relaying to uevent by waiting for DTR open on responder side. This
is the same behavior as on a physical serial interface. And on initiator
side a tty hangup can be detected if a link establishment request failed.
Revert the commits above completely to always register all user channels
and no control channel after mux attachment. No other changes are made.
Fixes: 5b87686e3203 ("tty: n_gsm: Modify gsmtty driver register method when config requester")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220422071025.5490-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 927728a34f11b5a27f4610bdb7068317d6fdc72a.
Once the uart_port->rs485->flag is set to SER_RS485_ENABLED, the port
should always work in RS485 mode. If users want the port to leave
RS485 mode, they need to call ioctl() to clear SER_RS485_ENABLED.
So here we shouldn't clear the RS485 bits in the shutdown().
Fixes: 927728a34f11 ("serial: sc16is7xx: Clear RS485 bits in the shutdown")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220418094339.678144-1-hui.wang@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add early console support in stm32 uart driver.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20220419085330.1178925-4-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for KGDB in stm32 serial driver by implementing characters
polling callbacks (poll_init, poll_get_char and poll_put_char).
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Jean Philippe Romain <jean-philippe.romain@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20220419085330.1178925-3-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rework stm32_usart_console_putchar() function in order to anticipate
the case where the character can never be sent.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20220419085330.1178925-2-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For historical reasons, the naming of parameters and their types in the
arm64 stacktrace code differs from that used in generic code and other
architectures, even though the types are equivalent.
For consistency and clarity, use the generic names.
There should be no functional change as a result of this patch.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com> for the series.
Link: https://lore.kernel.org/r/20220413145910.3060139-7-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Rename "struct stackframe" to "struct unwind_state" for consistency and
better naming. Accordingly, rename variable/argument "frame" to "state".
There should be no functional change as a result of this patch.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com> for the series.
Link: https://lore.kernel.org/r/20220413145910.3060139-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Rename unwinder functions for consistency and better naming.
- Rename start_backtrace() to unwind_init().
- Rename unwind_frame() to unwind_next().
- Rename walk_stackframe() to unwind().
There should be no functional change as a result of this patch.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com> for the series.
Link: https://lore.kernel.org/r/20220413145910.3060139-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Now that arm64 uses arch_stack_walk() consistently, struct stackframe is
only used within stacktrace.c. To make it easier to read and maintain
this code, it would be nicer if the definition were there too.
Move the definition into stacktrace.c.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviwed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com> for the series.
Link: https://lore.kernel.org/r/20220413145910.3060139-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The comment at the top of stacktrace.c isn't all that helpful, as it's
not associated with the code which inspects the frame record, and the
code example isn't representative of common code generation today.
Delete it.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com> for the series.
Link: https://lore.kernel.org/r/20220413145910.3060139-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently, there is a check for a NULL task in unwind_frame(). It is not
needed since all current callers pass a non-NULL task.
There should be no functional change as a result of this patch.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com> for the series.
Link: https://lore.kernel.org/r/20220413145910.3060139-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Move receive path flow control character handling to own function.
No functional changes.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220411094859.10894-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Do not set timeout to twice the approximate amount of time to send the
entire FIFO if CTS is enabled. If the caller requested no timeout, e.g.
when userspace program called tcdrain(), then wait without any timeout.
Premature return from tcdrain() was observed on imx based system which
has 32 character long transmitter FIFO with hardware CTS handling.
Simple userspace application that reproduces problem has to:
* Open tty device, enable hardware flow control (CRTSCTS)
* Write data, e.g. 26 bytes
* Call tcdrain() to wait for the transmitter
* Close tty device
The other side of serial connection has to:
* Receive some data, e.g. 10 bytes
* Set RTS output (CTS input from sender perspective) inactive for
at least twice the port timeout
* Try to receive remaining data
Without this patch, userspace application will finish without any error
while the other side of connection will never receive remaining data.
Signed-off-by: Tomasz Moń <tomasz.mon@camlingroup.com>
Link: https://lore.kernel.org/r/20220228054911.1420221-1-tomasz.mon@camlingroup.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Register a console in the ttyprintk driver so that it can be selected
for /dev/console with console=ttyprintk on the kernel command line,
similar to other console drivers.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220215141750.92808-1-vincent.whitchurch@axis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Note: I am using a small test app + driver located at [0] for the
problem description. serco is a driver whose write function dispatches
to the serial controller. sertest is a user-mode app that writes n bytes
to the serial console using the serco driver.
While investigating a bug in the RHEL kernel, I noticed that the serial
console throughput is way below the configured speed of 115200 bps in
a HP Proliant DL380 Gen9. I was expecting something above 10KB/s, but
I got 2.5KB/s.
$ time ./sertest -n 2500 /tmp/serco
real 0m0.997s
user 0m0.000s
sys 0m0.997s
With the help of the function tracer, I then noticed the serial
controller was taking around 410us seconds to dispatch one single byte:
$ trace-cmd record -p function_graph -g serial8250_console_write \
./sertest -n 1 /tmp/serco
$ trace-cmd report
| serial8250_console_write() {
0.384 us | _raw_spin_lock_irqsave();
1.836 us | io_serial_in();
1.667 us | io_serial_out();
| uart_console_write() {
| serial8250_console_putchar() {
| wait_for_xmitr() {
1.870 us | io_serial_in();
2.238 us | }
1.737 us | io_serial_out();
4.318 us | }
4.675 us | }
| wait_for_xmitr() {
1.635 us | io_serial_in();
| __const_udelay() {
1.125 us | delay_tsc();
1.429 us | }
...
...
...
1.683 us | io_serial_in();
| __const_udelay() {
1.248 us | delay_tsc();
1.486 us | }
1.671 us | io_serial_in();
411.342 us | }
In another machine, I measured a throughput of 11.5KB/s, with the serial
controller taking between 80-90us to send each byte. That matches the
expected throughput for a configuration of 115200 bps.
This patch changes the serial8250_console_write to use the 16550 fifo
if available. In my benchmarks I got around 25% improvement in the slow
machine, and no performance penalty in the fast machine.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20220411174841.34936-2-wander@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a deadlock in sa1100_set_termios(), which is shown
below:
(Thread 1) | (Thread 2)
| sa1100_enable_ms()
sa1100_set_termios() | mod_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | sa1100_timeout()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold sport->port.lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need sport->port.lock in position (2) of thread 2. As a result,
sa1100_set_termios() will block forever.
This patch moves del_timer_sync() before spin_lock_irqsave()
in order to prevent the deadlock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417111626.7802-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The definition of sysrq_key_table's elements, like sysrq_thaw_op and
sysrq_showallcpus_op are not consistent with sysrq_ftrace_dump_op,
Consistency makes code more readable.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Junwen Wu <wudaemon@gmail.com>
Link: https://lore.kernel.org/r/20220418153703.97705-1-wudaemon@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
No need to initialize the count variable in lpuart_copy_rx_to_tty(),
so let's remove it here.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20220418021844.29591-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This puts the link for libbpf API documentation into the sidebar
for much easier navigation.
You can preview this change at:
https://libbpf-test.readthedocs.io/en/latest/
Note that the link is hardcoded to the production version, so you
can see that it self references itself here for now:
https://libbpf-test.readthedocs.io/en/latest/api.html
This will need to make its way into the libbpf mirror, before being
deployed to libbpf.readthedocs.org
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220422031050.303984-1-grantseltzer@gmail.com
|
|
Some more serial drivers can be compile-tested under certain
circumstances (when building a specific architecture). So allow for
that.
This reduces the need of zillion mach/subarch-specific configs. And
since the 0day bot has only allmodconfig's for some archs, this
increases build coverage there too.
Note that cpm needs a minor update in the header, so that it drags in
at least some defines (CPM2 ones).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220421101708.5640-8-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pic32_uart contains this:
#ifdef CONFIG_SERIAL_PIC32_CONSOLE
...
console_initcall(pic32_console_init);
...
core_initcall(pic32_late_console_init);
...
#endif
...
arch_initcall(pic32_uart_init);
When the driver is built as module, all three above become
module_init(). So if SERIAL_PIC32_CONSOLE is set while SERIAL_PIC32=m,
it results in the following build error:
In file included from include/linux/device/driver.h:21,
from include/linux/device.h:32,
from include/linux/platform_device.h:13,
from drivers/tty/serial/pic32_uart.c:12:
include/linux/module.h:131:49: error: redefinition of '__inittest'
So make sure SERIAL_PIC32_CONSOLE can be set only when SERIAL_PIC32=y --
similar as for other drivers.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220421101708.5640-7-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The code wants to know if the circ buffer is empty, so use the proper
macro.
No functional change intended, just saner function name used for that
use case.
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220421101708.5640-6-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
struct uart_port::membase is declared as a pointer. So it should be
initialized by NULL, not zero constant.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220421101708.5640-5-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cache port->state->xmit into a local variable (xmit) in
cdns_uart_handle_tx(). This reduces length of some lines there
significantly. I.e. makes the code more readable.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220421101708.5640-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Return from the true branch of the 'if'. This saves one indentation
level and makes the code more readable.
The two comments about what obvious code does are removed too.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220421101708.5640-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Daniel Lezcano
Bruno Moreira-Guedes
Zhiyong.Tao
Solomon Tan
Jaehee Park
Martin Kaiser
Haowen Bai
Artur Bujdoso
Rebecca Mckeever
Zhang Rui
Maciej W. Rozycki
Daniel Starke
Hui Wang
Valentin Caron
Madhavan T. Venkataraman
Mark Rutland
Ilpo Järvinen
Tomasz Moń
Vincent Whitchurch
Wander Lairson Costa
Duoming Zhou
Junwen Wu
Sherry Sun
Grant Seltzer
Jiri Slaby