| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Flushing system-wide workqueues is dangerous and will be forbidden.
Replace system_long_wq with local rnbd_clt_wq.
Link: https://lkml.kernel.org/r/49925af7-78a8-a3dd-bce6-cfc02e1a9236@I-love.SAKURA.ne.jp
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Santosh Kumar Pradhan <santosh.pradhan@ionos.com>
Link: https://lore.kernel.org/r/20220413123420.66470-1-jinpu.wang@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use kzalloc rather than duplicating its implementation, which
makes code simple and easy to understand.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
All temperature of Fintek superio hwmonitor that using 1-byte reg will use
2's complement.
In show_temp()
temp = data->temp[nr] * 1000;
When data->temp[nr] read as 255, it indicate -1C, but this code will report
255C to userspace. It'll be ok when change to:
temp = ((s8)data->temp[nr]) * 1000;
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Link: https://lore.kernel.org/r/20220418090706.6339-1-hpeter+linux_kernel@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The memory operation types are not only for load and store, for easier
reviewing the memory operation type, this patch prints out it.
Before:
ls 14753 [011] 3678.072400: 1 l1d-miss: 88000182 L1 miss|SNP N/A|TLB Walker hit|LCK No|BLK N/A ffffa7c22b4b2a00 [unknown] ([kernel.kallsyms])
ls 14753 [011] 3678.072400: 1 l1d-access: 88000182 L1 miss|SNP N/A|TLB Walker hit|LCK No|BLK N/A ffffa7c22b4b2a00 [unknown] ([kernel.kallsyms])
ls 14753 [011] 3678.072400: 1 tlb-access: 88000182 L1 miss|SNP N/A|TLB Walker hit|LCK No|BLK N/A ffffa7c22b4b2a00 [unknown] ([kernel.kallsyms])
ls 14753 [011] 3678.072400: 1 memory: 88000182 L1 miss|SNP N/A|TLB Walker hit|LCK No|BLK N/A ffffa7c22b4b2a00 [unknown] ([kernel.kallsyms])
After:
ls 14753 [011] 3678.072400: 1 l1d-miss: 88000182 |OP LOAD|LVL L1 miss|SNP N/A|TLB Walker hit|LCK No|BLK N/A ffffa7c22b4b2a00 [unknown] ([kernel.kallsyms])
ls 14753 [011] 3678.072400: 1 l1d-access: 88000182 |OP LOAD|LVL L1 miss|SNP N/A|TLB Walker hit|LCK No|BLK N/A ffffa7c22b4b2a00 [unknown] ([kernel.kallsyms])
ls 14753 [011] 3678.072400: 1 tlb-access: 88000182 |OP LOAD|LVL L1 miss|SNP N/A|TLB Walker hit|LCK No|BLK N/A ffffa7c22b4b2a00 [unknown] ([kernel.kallsyms])
ls 14753 [011] 3678.072400: 1 memory: 88000182 |OP LOAD|LVL L1 miss|SNP N/A|TLB Walker hit|LCK No|BLK N/A ffffa7c22b4b2a00 [unknown] ([kernel.kallsyms])
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220417124524.901148-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Optimize memcpy_{from,to}io() and memset_io() by transferring in
64 bit as much as possible with minimized barrier usage. This
simplest optimization brings faster throughput compare to current
byte-by-byte read and write with barrier in the loop. Code's
skeleton is taken from the powerpc & arm64.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
|
|
Try to access RAM with the largest bit width possible, but without
doing unaligned accesses.
A further improvement could be to use multiple read and writes as the
assembly version was trying to do.
Tested on a BeagleV Starlight with a SiFive U74 core, where the
improvement is noticeable.
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Co-developed-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
|
|
Since we have generic function to count GPIO controller nodes
under a given device, there is no need to open code it. Replace
custom code by gpiochip_node_count() call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
|
|
Enable COMPILE_TEST for a better test coverage.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
|
|
Currently compilation test fails on x86 due to name collision. The usual
way to fix that is to move both conflicting parts to their own namespaces.
Rename REG_* to MESON_REG_* as a prerequisite for enabling COMPILE_TEST.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
|
|
Since we have fwnode of the first found GPIO controller assigned to the
struct gpio_chip, we may reuse it in the armada_37xx_irqchip_register().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
GPIO library now accepts fwnode as a firmware node,
so switch the driver to use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
There is no need to destroy the workqueue when clearing unbinding
a loop device from a backing file. Not doing so on the other hand
avoid creating a complex lock dependency chain involving the global
system_transition_mutex.
Based on a patch from Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>.
Reported-by: syzbot+6479585dfd4dedd3f7e1@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: syzbot+6479585dfd4dedd3f7e1@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20220330052917.2566582-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
lo_refcount counts how many openers a loop device has, but that count
is already provided by the block layer in the bd_openers field of the
whole-disk block_device. Remove lo_refcount and allow opens to
succeed even on devices beeing deleted - now that ->free_disk is
implemented we can handle that race gracefull and all I/O on it will
just fail. Similarly there is a small race window now where
loop_control_remove does not synchronize the delete vs the remove
due do bd_openers not being under lo_mutex protection, but we can
handle that just as gracefully.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since ->release is called with disk->open_mutex held, and __loop_clr_fd()
from lo_release() is called via ->release when disk_openers() == 0, we are
guaranteed that "struct file" which will be passed to loop_validate_file()
via fget() cannot be the loop device __loop_clr_fd(lo, true) will clear.
Thus, there is no need to hold loop_validate_mutex from __loop_clr_fd()
if release == true.
When I made commit 3ce6e1f662a91097 ("loop: reintroduce global lock for
safe loop_validate_file() traversal"), I wrote "It is acceptable for
loop_validate_file() to succeed, for actual clear operation has not started
yet.". But now I came to feel why it is acceptable to succeed.
It seems that the loop driver was added in Linux 1.3.68, and
if (lo->lo_refcnt > 1)
return -EBUSY;
check in loop_clr_fd() was there from the beginning. The intent of this
check was unclear. But now I think that current
disk_openers(lo->lo_disk) > 1
form is there for three reasons.
(1) Avoid I/O errors when some process which opens and reads from this
loop device in response to uevent notification (e.g. systemd-udevd),
as described in commit a1ecac3b0656a682 ("loop: Make explicit loop
device destruction lazy"). This opener is short-lived because it is
likely that the file descriptor used by that process is closed soon.
(2) Avoid I/O errors caused by underlying layer of stacked loop devices
(i.e. ioctl(some_loop_fd, LOOP_SET_FD, other_loop_fd)) being suddenly
disappeared. This opener is long-lived because this reference is
associated with not a file descriptor but lo->lo_backing_file.
(3) Avoid I/O errors caused by underlying layer of mounted loop device
(i.e. mount(some_loop_device, some_mount_point)) being suddenly
disappeared. This opener is long-lived because this reference is
associated with not a file descriptor but mount.
While race in (1) might be acceptable, (2) and (3) should be checked
racelessly. That is, make sure that __loop_clr_fd() will not run if
loop_validate_file() succeeds, by doing refcount check with global lock
held when explicit loop device destruction is requested.
As a result of no longer waiting for lo->lo_mutex after setting Lo_rundown,
we can remove pointless BUG_ON(lo->lo_state != Lo_rundown) check.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220330052917.2566582-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, udev change event is generated for a loop device before the
device is ready for IO. Due to serialization on lo->lo_mutex in
lo_open() this does not matter because anybody is able to open the
device and do IO only after the configuration is finished. However this
synchronization in lo_open() is going away so make sure userspace
reacting to the change event will see the new device state by generating
the event only when the device is setup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Ensure that the lo_device which is stored in the gendisk private
data is valid until the gendisk is freed. Currently the loop driver
uses a lot of effort to make sure a device is not freed when it is
still in use, but to to fix a potential deadlock this will be relaxed
a bit soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
->release is only called after all outstanding I/O has completed, so only
freeze the queue when clearing the backing file of a live loop device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220330052917.2566582-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
By the time the final ->release is called there can't be outstanding I/O.
For non-final ->release there is no need for driver action at all.
Thus remove the useless queue freeze.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220330052917.2566582-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Nothing prevents a file system or userspace opener of the block device
from redirtying the page right afte sync_blockdev returned. Fortunately
data in the page cache during a block device change is mostly harmless
anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220330052917.2566582-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no need to reinitialize idle_worker_list, worker_tree and timer
every time a loop device is configured. Just initialize them once at
allocation time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220330052917.2566582-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use a common helper for both timer based and uncoditional freeing of idle
workers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220330052917.2566582-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All manipulation of bd_openers is under disk->open_mutex and will remain
so for the foreseeable future. But at least one place reads it without
the lock (blkdev_get) and there are more to be added. So make sure the
compiler does not do turn the increments and decrements into non-atomic
sequences by using an atomic_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper that returns the openers for a given gendisk to avoid having
drivers poke into disk->part0 to get at this information in a somewhat
cumbersome way.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove the bdev variable and just use the gendisk pointed to by the
zram_device directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use a local variable for the gendisk instead of the part0 block_device,
as the gendisk is what this function actually operates on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The bdev parameter to ->ioctl contains the block device that the ioctl
is called on, which can be the partition. But the openers check in
nbd_bdev_reset really needs to check use the whole device, so switch to
using that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Export IO accounting interfaces in terms of block_device now that
gendisk has become more internal to block core.
Rename __part_{start,end}_io_acct's first argument from part to bdev.
Rename __part_{start,end}_io_acct to bdev_{start,end}_io_acct and
export them. Remove disk_{start,end}_io_acct and update caller (zram)
to use bdev_{start,end}_io_acct.
DM can now be updated to use bdev_{start,end}_io_acct.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20220418022733.56168-2-snitzer@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The Gateworks GW7400 is an ARM based single board computer (SBC)
featuring:
- i.MX8M Plus SoC
- LPDDR4 DRAM
- eMMC FLASH
- Gateworks System Controller (GSC)
- QOS GbE
- Microchip GbE Switch
- Multiple multi-protocol RS232/RS485/RS422 Serial ports
- USB 3.0 Front panel connector
- onboard 802.11ac WiFi / BT
- 3x miniPCIe socket with PCIe and USB 2.0
- 1x M.2 B/A-E socket with PCIe, USB 3.0 and dual nano-SIM sockets
- off-board connectors for: MIPI DSI, MIPI CSI, SPI, GPIO, I2C
- Wide range DC power input
- Passive PoE
- 802.3at PoE
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This will reset deeply on freeze and thaw instead of suspend and
resume and prevent null pointer dereferences of the uninitialized ring
0 buffer while thawing.
The impact is an indefinitely hanging kernel. You can't switch
consoles after this and the only possible user interaction is SysRq.
BUG: kernel NULL pointer dereference
RIP: 0010:aq_ring_rx_fill+0xcf/0x210 [atlantic]
aq_vec_init+0x85/0xe0 [atlantic]
aq_nic_init+0xf7/0x1d0 [atlantic]
atl_resume_common+0x4f/0x100 [atlantic]
pci_pm_thaw+0x42/0xa0
resolves in aq_ring.o to
```
0000000000000ae0 <aq_ring_rx_fill>:
{
/* ... */
baf: 48 8b 43 08 mov 0x8(%rbx),%rax
buff->flags = 0U; /* buff is NULL */
```
The bug has been present since the introduction of the new pm code in
8aaa112a57c1 ("net: atlantic: refactoring pm logic") and was hidden
until 8ce84271697a ("net: atlantic: changes for multi-TC support"),
which refactored the aq_vec_{free,alloc} functions into
aq_vec_{,ring}_{free,alloc}, but is technically not wrong. The
original functions just always reinitialized the buffers on S3/S4. If
the interface is down before freezing, the bug does not occur. It does
not matter, whether the initrd contains and loads the module before
thawing.
So the fix is to invert the boolean parameter deep in all pm function
calls, which was clearly intended to be set like that.
First report was on Github [1], which you have to guess from the
resume logs in the posted dmesg snippet. Recently I posted one on
Bugzilla [2], since I did not have an AQC device so far.
#regzbot introduced: 8ce84271697a
#regzbot from: koo5 <kolman.jindrich@gmail.com>
#regzbot monitor: https://github.com/Aquantia/AQtion/issues/32
Fixes: 8aaa112a57c1 ("net: atlantic: refactoring pm logic")
Link: https://github.com/Aquantia/AQtion/issues/32 [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215798 [2]
Cc: stable@vger.kernel.org
Reported-by: koo5 <kolman.jindrich@gmail.com>
Signed-off-by: Manuel Ullmann <labre@posteo.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DSA tags before IP header (categories 1 and 2) or after the payload (3)
might introduce offload checksum issues.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add pwm1/backlight support nodes for imx8mm_evk board.
Align with u-boot dts
References:
- https://patchwork.ozlabs.org/project/uboot/patch/20220326111911.13720-9-tommaso.merciai@amarulasolutions.com/
Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add a device tree for the 8MNANOD3L-EVK eval board which features an
IMX8MN SoC. It is similar to the 8MNANODLPD4-EVK eval board except it
has an IMX8MN UltraLite SoC and DDR3L memory. It esp. differs in the
PMIC configuration because the SoC has a smaller package and thus the
ARM core voltage is combined with the SoC voltage and the DDR voltage
is 1.35V for the DDR3L memory.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Ido Schimmel says:
====================
mlxsw: Introduce line card support for modular switch
Jiri says:
This patchset introduces support for modular switch systems and also
introduces mlxsw support for NVIDIA Mellanox SN4800 modular switch.
It contains 8 slots to accommodate line cards - replaceable PHY modules
which may contain gearboxes.
Currently supported line card:
16X 100GbE (QSFP28)
Other line cards that are going to be supported:
8X 200GbE (QSFP56)
4X 400GbE (QSFP-DD)
There may be other types of line cards added in the future.
To be consistent with the port split configuration (splitter cabels),
the line card entities are treated in the similar way. The nature of
a line card is not "a pluggable device", but "a pluggable PHY module".
A concept of "provisioning" is introduced. The user may "provision"
certain slot with a line card type. Driver then creates all instances
(devlink ports, netdevices, etc) related to this line card type. It does
not matter if the line card is plugged-in at the time. User is able to
configure netdevices, devlink ports, setup port splitters, etc. From the
perspective of the switch ASIC, all is present and can be configured.
The carrier of netdevices stays down if the line card is not plugged-in.
Once the line card is inserted and activated, the carrier of
the related netdevices is then reflecting the physical line state,
same as for an ordinary fixed port.
Once user does not want to use the line card related instances
anymore, he can "unprovision" the slot. Driver then removes the
instances.
Patches 1-4 are extending devlink driver API and UAPI in order to
register, show, dump, provision and activate the line card.
Patches 5-17 are implementing the introduced API in mlxsw.
The last patch adds a selftest for mlxsw line cards.
Example:
$ devlink port # No ports are listed
$ devlink lc
pci/0000:01:00.0:
lc 1 state unprovisioned
supported_types:
16x100G
lc 2 state unprovisioned
supported_types:
16x100G
lc 3 state unprovisioned
supported_types:
16x100G
lc 4 state unprovisioned
supported_types:
16x100G
lc 5 state unprovisioned
supported_types:
16x100G
lc 6 state unprovisioned
supported_types:
16x100G
lc 7 state unprovisioned
supported_types:
16x100G
lc 8 state unprovisioned
supported_types:
16x100G
Note that driver exposes list supported line card types. Currently
there is only one: "16x100G".
To provision the slot #8:
$ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G
$ devlink lc show pci/0000:01:00.0 lc 8
pci/0000:01:00.0:
lc 8 state active type 16x100G
supported_types:
16x100G
$ devlink port
pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false
pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4
pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4
pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4
pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4
pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4
pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4
pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4
pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4
pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4
pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4
pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4
pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4
pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4
pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4
pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4
pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4
To uprovision the slot #8:
$ devlink lc set pci/0000:01:00.0 lc 8 notype
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce basic line card manipulation which consists of provisioning,
unprovisioning and activation of a line card.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For each port get slot_index using PMLP register. For ports residing
on a linecard, identify it with the linecard by setting mapping
using devlink_port_linecard_set() helper. Use linecard slot index for
PMTDB register queries.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case of line card implementation, the core has to have a way to
remove relevant ports manually. Extend the Spectrum driver ops by an op
that implements port removal of selected ports upon request.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow to process events generated upon line card getting "ready" and
"active".
When DSDSC event with "ready" bit set is delivered, that means the
line card is powered up. Use MDDC register to push the line card to
active state. Once FW is done with that, the DSDSC event with "active"
bit set is delivered.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce objects for line cards and an infrastructure around that.
Use devlink_linecard_create/destroy() to register the line card with
devlink core. Implement provisioning ops with a list of supported
line cards.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MBCT register allows to transfer binary INI codes from the host to
the management FW by transferring it by chunks of maximum 1KB.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MDDC register allows to control downstream devices and line cards.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MDDQ register allows to query the DownStream device properties.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Register PMLPE trap and process the port mapping changes delivered
by it by creating related ports. Note that this happens after
provisioning. The INI of the linecard is processed and merged by FW.
PMLPE is generated for each port. Process this mapping change.
Layout of PMLPE is the same as layout of PMLP.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No need to hold the lock for alloc and freecpu. So narrow the critical
section. Follow-up patch is going to benefit from this by adding more
code to the functions which will be out of the critical as well.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The PMECR register is used to enable/disable event triggering
in case of local port mapping change.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of array of pointers to port mapping structures, allocate the
array of structures directly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
So far, the lane index always started from zero. That is not true for
modular systems with gearbox-equipped linecards. Loose the check so the
lanes can start from non-zero index.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to properly inform user about relationship between port and
line card, introduce a driver API to set line card for a port. Use this
information to extend port devlink netlink message by line card index
and also include the line card index into phys_port_name and by that
into a netdevice name.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow driver to mark a line card as active. Expose this state to the
userspace over devlink netlink interface with proper notifications.
'active' state means that line card was plugged in after
being provisioned.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to be able to configure all needed stuff on a port/netdevice
of a line card without the line card being present, introduce line card
provisioning. Basically by setting a type, provisioning process will
start and driver is supposed to create a placeholder for instances
(ports/netdevices) for a line card type.
Allow the user to query the supported line card types over line card
get command. Then implement two netlink command SET to allow user to
set/unset the card type.
On the driver API side, add provision/unprovision ops and supported
types array to be advertised. Upon provision op call, the driver should
take care of creating the instances for the particular line card type.
Introduce provision_set/clear() functions to be called by the driver
once the provisioning/unprovisioning is done on its side. These helpers
are not to be called directly due to the async nature of provisioning.
Example:
$ devlink port # No ports are listed
$ devlink lc
pci/0000:01:00.0:
lc 1 state unprovisioned
supported_types:
16x100G
lc 2 state unprovisioned
supported_types:
16x100G
lc 3 state unprovisioned
supported_types:
16x100G
lc 4 state unprovisioned
supported_types:
16x100G
lc 5 state unprovisioned
supported_types:
16x100G
lc 6 state unprovisioned
supported_types:
16x100G
lc 7 state unprovisioned
supported_types:
16x100G
lc 8 state unprovisioned
supported_types:
16x100G
$ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G
$ devlink lc show pci/0000:01:00.0 lc 8
pci/0000:01:00.0:
lc 8 state active type 16x100G
supported_types:
16x100G
$ devlink port
pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false
pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4
pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4
pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4
pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4
pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4
pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4
pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4
pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4
pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4
pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4
pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4
pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4
pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4
pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4
pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4
pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4
$ devlink lc set pci/0000:01:00.0 lc 8 notype
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend the devlink API so the driver is going to be able to create and
destroy linecard instances. There can be multiple line cards per devlink
device. Expose this new type of object over devlink netlink API to the
userspace, with notifications.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Jack Wang
Haowen Bai
Ji-Ze Hong (Peter Hong)
Leo Yan
Guo Ren
Matteo Croce
Andy Shevchenko
Christoph Hellwig
Tetsuo Handa
Ming Lei
Tim Harvey
Manuel Ullmann
Luiz Angelo Daros de Luca
Tommaso Merciai
Michael Walle
David S. Miller
Jiri Pirko