aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-04-14tty: serial: mpc52xx_uart: remove double ifdefferyJiri Slaby1-3/+0
The code now contains: #ifdef CONFIG_PPC_MPC512x ... #endif #ifdef CONFIG_PPC_MPC512x ... #endif So remove the endif+ifdef from the middle, provided it's about the same define. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220411104506.8990-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14tty: synclink_gt: Fix null-pointer-dereference in slgt_clean()Zheyu Ma1-0/+2
When the driver fails at alloc_hdlcdev(), and then we remove the driver module, we will get the following splat: [ 25.065966] general protection fault, probably for non-canonical address 0xdffffc0000000182: 0000 [#1] PREEMPT SMP KASAN PTI [ 25.066914] KASAN: null-ptr-deref in range [0x0000000000000c10-0x0000000000000c17] [ 25.069262] RIP: 0010:detach_hdlc_protocol+0x2a/0x3e0 [ 25.077709] Call Trace: [ 25.077924] <TASK> [ 25.078108] unregister_hdlc_device+0x16/0x30 [ 25.078481] slgt_cleanup+0x157/0x9f0 [synclink_gt] Fix this by checking whether the 'info->netdev' is a null pointer first. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/20220410114814.3920474-1-zheyuma97@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14Documentation: tty: n_gsm, use power of ReSTJiri Slaby1-70/+74
Reformat the whole document, so that automatic numbering and TOC is properly generated. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220411110143.10019-7-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14Documentation: tty: n_gsm, delete "Additional Documentation"Jiri Slaby1-10/+0
All of the URLs give 404. There is a little point to preserve them. If really need be, we could try archive.org if the documents are not there by a chance. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220411110143.10019-6-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14Documentation: tty: move moxa-smartio.rst to ttyJiri Slaby3-1/+1
It is a tty_driver, not serial -- uart_driver. So move it to the tty docs dir too. (The same as the driver itself.) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220411110143.10019-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14Documentation: tty: move n_gsm to ttyJiri Slaby3-1/+1
We have n_tty documented in Documentation/driver-api/tty/. n_gsm belongs there too, so move from serial/ to tty/ too. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220411110143.10019-4-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14Documentation: tty: introduce "Other Documentation"Jiri Slaby1-1/+10
So far only n_tty belongs here, but in the next patches, more will come. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220411110143.10019-3-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14Documentation: move tty to driver-apiJiri Slaby11-7/+6
Based on discussion starting as 87mthw2o93.fsf@meer.lwn.net, let's move the tty documentation to driver-api. It's more appropriate there. Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220411110143.10019-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14staging: rtl8192u: make read-only array EWC11NHTCap static constColin Ian King1-1/+1
Don't populate the read-only array EWC11NHTCap on the stack but instead make it static const. Also makes the object code a little smaller. Remove comment. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220414103650.297396-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14block: null_blk: end timed out poll requestMing Lei1-1/+1
When poll request is timed out, it is removed from the poll list, but not completed, so the request is leaked, and never get chance to complete. Fix the issue by ending it in timeout handler. Fixes: 0a593fbbc245 ("null_blk: poll queue support") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220413084836.1571995-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-14block: fix offset/size check in bio_trim()Ming Lei1-1/+1
Unit of bio->bi_iter.bi_size is bytes, but unit of offset/size is sector. Fix the above issue in checking offset/size in bio_trim(). Fixes: e83502ca5f1e ("block: fix argument type of bio_trim()") Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220414084443.1736850-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-14USB: quirks: add STRING quirk for VCOM deviceOliver Neukum1-0/+3
This has been reported to stall if queried Cc: stable <stable@vger.kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220414123152.1700-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14USB: quirks: add a Realtek card readerOliver Neukum1-0/+3
This device is reported to stall when enummerated. Cc: stable <stable@vger.kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220414110209.30924-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14ice: Fix memory leak in ice_get_orom_civd_data()Jianglei Nie1-0/+1
A memory chunk was allocated for orom_data in ice_get_orom_civd_data() by vzmalloc(). But when ice_read_flash_module() fails, the allocated memory is not freed, which will lead to a memory leak. We can fix it by freeing the orom_data when ce_read_flash_module() fails. Fixes: af18d8866c80 ("ice: reduce time to read Option ROM CIVD data") Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-14dt-bindings: soc: qcom,smp2p: convert to dtschemaKrzysztof Kozlowski2-110/+145
Convert the Qualcomm Shared Memory Point 2 Point bindings to DT Schema. Changes against original bindings: enforce only specific names of child nodes, instead of any names. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220411155528.502889-1-krzysztof.kozlowski@linaro.org
2022-04-14ice: fix crash in switchdev modeWojciech Drewek1-1/+2
Below steps end up with crash: - modprobe ice - devlink dev eswitch set $PF1_PCI mode switchdev - echo 64 > /sys/class/net/$PF1/device/sriov_numvfs - rmmod ice Calling ice_eswitch_port_start_xmit while the process of removing VFs is in progress ends up with NULL pointer dereference. That's because PR netdev is not released but some resources are already freed. Fix it by checking if ICE_VF_DIS bit is set. Call trace: [ 1379.595146] BUG: kernel NULL pointer dereference, address: 0000000000000040 [ 1379.595284] #PF: supervisor read access in kernel mode [ 1379.595410] #PF: error_code(0x0000) - not-present page [ 1379.595535] PGD 0 P4D 0 [ 1379.595657] Oops: 0000 [#1] PREEMPT SMP PTI [ 1379.595783] CPU: 4 PID: 974 Comm: NetworkManager Kdump: loaded Tainted: G OE 5.17.0-rc8_mrq_dev-queue+ #12 [ 1379.595926] Hardware name: Intel Corporation S1200SP/S1200SP, BIOS S1200SP.86B.03.01.0042.013020190050 01/30/2019 [ 1379.596063] RIP: 0010:ice_eswitch_port_start_xmit+0x46/0xd0 [ice] [ 1379.596292] Code: c7 c8 09 00 00 e8 9a c9 fc ff 84 c0 0f 85 82 00 00 00 4c 89 e7 e8 ca 70 fe ff 48 8b 7d 58 48 89 c3 48 85 ff 75 5e 48 8b 53 20 <8b> 42 40 85 c0 74 78 8d 48 01 f0 0f b1 4a 40 75 f2 0f b6 95 84 00 [ 1379.596456] RSP: 0018:ffffaba0c0d7bad0 EFLAGS: 00010246 [ 1379.596584] RAX: ffff969c14c71680 RBX: ffff969c14c71680 RCX: 000100107a0f0000 [ 1379.596715] RDX: 0000000000000000 RSI: ffff969b9d631000 RDI: 0000000000000000 [ 1379.596846] RBP: ffff969c07b46500 R08: ffff969becfca8ac R09: 0000000000000001 [ 1379.596977] R10: 0000000000000004 R11: ffffaba0c0d7bbec R12: ffff969b9d631000 [ 1379.597106] R13: ffffffffc08357a0 R14: ffff969c07b46500 R15: ffff969b9d631000 [ 1379.597237] FS: 00007f72c0e25c80(0000) GS:ffff969f13500000(0000) knlGS:0000000000000000 [ 1379.597414] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1379.597562] CR2: 0000000000000040 CR3: 000000012b316006 CR4: 00000000003706e0 [ 1379.597713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1379.597863] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1379.598015] Call Trace: [ 1379.598153] <TASK> [ 1379.598294] dev_hard_start_xmit+0xd9/0x220 [ 1379.598444] sch_direct_xmit+0x8a/0x340 [ 1379.598592] __dev_queue_xmit+0xa3c/0xd30 [ 1379.598739] ? packet_parse_headers+0xb4/0xf0 [ 1379.598890] packet_sendmsg+0xa15/0x1620 [ 1379.599038] ? __check_object_size+0x46/0x140 [ 1379.599186] sock_sendmsg+0x5e/0x60 [ 1379.599330] ____sys_sendmsg+0x22c/0x270 [ 1379.599474] ? import_iovec+0x17/0x20 [ 1379.599622] ? sendmsg_copy_msghdr+0x59/0x90 [ 1379.599771] ___sys_sendmsg+0x81/0xc0 [ 1379.599917] ? __pollwait+0xd0/0xd0 [ 1379.600061] ? preempt_count_add+0x68/0xa0 [ 1379.600210] ? _raw_write_lock_irq+0x1a/0x40 [ 1379.600369] ? ep_done_scan+0xc9/0x110 [ 1379.600494] ? _raw_spin_unlock_irqrestore+0x25/0x40 [ 1379.600622] ? preempt_count_add+0x68/0xa0 [ 1379.600747] ? _raw_spin_lock_irq+0x1a/0x40 [ 1379.600899] ? __fget_light+0x8f/0x110 [ 1379.601024] __sys_sendmsg+0x49/0x80 [ 1379.601148] ? release_ds_buffers+0x50/0xe0 [ 1379.601274] do_syscall_64+0x3b/0x90 [ 1379.601399] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 1379.601525] RIP: 0033:0x7f72c1e2e35d Fixes: f5396b8a663f ("ice: switchdev slow path") Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Reported-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-14ice: allow creating VFs for !CONFIG_NET_SWITCHDEVMaciej Fijalkowski1-1/+1
Currently for !CONFIG_NET_SWITCHDEV kernel builds it is not possible to create VFs properly as call to ice_eswitch_configure() returns -EOPNOTSUPP for us. This is because CONFIG_ICE_SWITCHDEV depends on CONFIG_NET_SWITCHDEV. Change the ice_eswitch_configure() implementation for !CONFIG_ICE_SWITCHDEV to return 0 instead -EOPNOTSUPP and let ice_ena_vfs() finish its work properly. CC: Grzegorz Nitka <grzegorz.nitka@intel.com> Fixes: 1a1c40df2e80 ("ice: set and release switchdev environment") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-14ice: xsk: check if Rx ring was filled up to the endMaciej Fijalkowski1-1/+6
__ice_alloc_rx_bufs_zc() checks if a number of the descriptors to be allocated would cause the ring wrap. In that case, driver will issue two calls to xsk_buff_alloc_batch() - one that will fill the ring up to the end and the second one that will start with filling descriptors from the beginning of the ring. ice_fill_rx_descs() is a wrapper for taking care of what xsk_buff_alloc_batch() gave back to the driver. It works in a best effort approach, so for example when driver asks for 64 buffers, ice_fill_rx_descs() could assign only 32. Such case needs to be checked when ring is being filled up to the end, because in that situation ntu might not reached the end of the ring. Fix the ring wrap by checking if nb_buffs_extra has the expected value. If not, bump ntu and go directly to tail update. Fixes: 3876ff525de7 ("ice: xsk: Handle SW XDP ring wrap and bump tail more often") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Shwetha Nagaraju <Shwetha.nagaraju@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-14spi: core: Initialize returned status in spi_setupPaul Kocialkowski1-1/+1
The previous commit that made bits-per-word validation conditional results in leaving no unconditional affectation of the status variable. Since the variable is returned at the end of the function, initialize it to avoid returning an undefined value. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Fixes: b3fe2e516741 ("spi: core: Only check bits_per_word validity when explicitly provided") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220414084040.975520-1-paul.kocialkowski@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-14Merge tag 'tai-for-tracing' into timers/coreThomas Gleixner382-3416/+4513
Pull in the NMI safe TAI accessor which was provided for the tracing tree to prepare for further changes in this area.
2022-04-14timekeeping: Introduce fast accessor to clock taiKurt Kanzenbach3-0/+19
Introduce fast/NMI safe accessor to clock tai for tracing. The Linux kernel tracing infrastructure has support for using different clocks to generate timestamps for trace events. Especially in TSN networks it's useful to have TAI as trace clock, because the application scheduling is done in accordance to the network time, which is based on TAI. With a tai trace_clock in place, it becomes very convenient to correlate network activity with Linux kernel application traces. Use the same implementation as ktime_get_boot_fast_ns() does by reading the monotonic time and adding the TAI offset. The same limitations as for the fast boot implementation apply. The TAI offset may change at run time e.g., by setting the time or using adjtimex() with an offset. However, these kind of offset changes are rare events. Nevertheless, the user has to be aware and deal with it in post processing. An alternative approach would be to use the same implementation as ktime_get_real_fast_ns() does. However, this requires to add an additional u64 member to the tk_read_base struct. This struct together with a seqcount is designed to fit into a single cache line on 64 bit architectures. Adding a new member would violate this constraint. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20220414091805.89667-2-kurt@linutronix.de
2022-04-14tracing/timer: Add missing argument documentation of trace pointsAnna-Maria Behnsen1-1/+4
Documentation of trace points timer_start, timer_expire_entry and hrtimer_start lack always the last argument. Add it to keep implementation and documentation in sync. Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20220411140115.24185-1-anna-maria@linutronix.de
2022-04-14genirq: Take the proposed affinity at face value if force==trueMarc Zyngier1-2/+8
Although setting the affinity of an interrupt to a set of CPUs that doesn't have any online CPU is generally frowned apon, there are a few limited cases where such affinity is set from a CPUHP notifier, setting the affinity to a CPU that isn't online yet. The saving grace is that this is always done using the 'force' attribute, which gives a hint that the affinity setting can be outside of the online CPU mask and the callsite set this flag with the knowledge that the underlying interrupt controller knows to handle it. This restores the expected behaviour on Marek's system. Fixes: 33de0aa4bae9 ("genirq: Always limit the affinity to online CPUs") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/4b7fc13c-887b-a664-26e8-45aed13f048a@samsung.com Link: https://lore.kernel.org/r/20220414140011.541725-1-maz@kernel.org
2022-04-14drm/edid: add EDID block count and size helpersJani Nikula1-23/+57
Add some helpers to figure out the EDID extension block count, block count, size, pointers to blocks. Unfortunately, we'll need to cast away the const in a few places where we actually need to access the data. v3: fix (!edid_extension_block_count(edid) == 0) (kernel test robot) v2: fix s/j/i/ introduced in a rebase Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/dc7b0850293d837439fb3914c8a9d81e39018b4b.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: add single point of return to drm_do_get_edid()Jani Nikula1-7/+8
This will be useful in the future. Use fail label for fail exit. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8e564e9415baa4dc9dc3127e4200b2618a8a3ba0.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: drop extra local varJani Nikula1-4/+4
We don't need override as a variable for anything. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4d249173b34758e1d6c4a74eb98518d180f0a8ae.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: convert extension block read to EDID block read helperJani Nikula1-8/+7
Use the EDID block read helper also for extension block reads, making edid_block_read() the only place with the read retry logic. Note: We observe that drm_do_get_edid() does not use invalid extension blocks to flag the EDID as corrupt. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a6328b898db40235b85ad4635374bc0768b5a970.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: use EDID block read helper in drm_do_get_edid()Jani Nikula1-39/+23
Convert drm_do_get_edit() from the base block read helper to the generic block read helper. There's quite a bit going on here, as the corrupt and null EDID information is moved back to the caller. As we see, they were not all that clear to begin with, and this change underlines that. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3bcf98453770757ee93386da0cfbc6552d42a312.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: abstract an EDID block read helperJani Nikula1-7/+51
We have an abstraction for the EDID base block read, yet duplicating the retries and error handling for extension block reads. Introduce a more generic EDID block read helper. Switch to the helper piecemeal, starting with drm_edid_get_panel_id(), which doesn't need or have access to the connector anyway. The subtle change is switching from drm_edid_block_valid() to edid_block_check(). We also status print once, not for every attempt. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/47560f7530e4a7b32b56cb9038178244fe30a4af.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: add typedef for block read functionJani Nikula1-9/+9
Make the callback a bit easier on the eye. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/10b8721bb7ea8c7df1fd0c1d97c5d446905abbf4.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: pass struct edid to connector_bad_edid()Jani Nikula1-9/+6
Avoid casting here and there, and make it const. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4f9fdc961dfd9b36f4649e8ba57d05e43375fc92.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: add a helper to log dump an EDID blockJani Nikula1-14/+19
Unify debug log dumping. There's duplication in the error paths for EDID block validity checks, but this should be neglible. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b56f120a26f54b0defc43faa6d49e26f072d4d8f.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: refactor EDID block status printingJani Nikula1-24/+51
Split out a function to log EDID block status. The printouts get changed slightly. Unfortunately, not all users will have struct drm_device available, so we convert to pr_* debug logging instead of drm device based logging. v2: Complain more loudly about unknown status codes (Ville) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/98d12db95e55e2e18548822078ec3b16ae006732.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: have edid_block_check() detect blocks that are all zeroJani Nikula1-5/+14
We have the check function, have it also detect blocks that are all zero instead of leaving that to callers. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f9ad302e6b7dbcd1dff98d94ec5500ce27bebe10.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: convert edid_is_zero() to edid_block_is_zero() for blocksJani Nikula1-5/+5
As edid_is_zero() is only ever used on EDID blocks, convert it to edid_block_is_zero() with implicit block size. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/5cc9387e22b4a61243df4053d1ebcc14b0007dc8.1649685475.git.jani.nikula@intel.com
2022-04-14Merge branch 'rndis_host-handle-bogus-mac-addresses-in-zte-rndis-devices'Paolo Abeni4-5/+47
Lech Perczak says: ==================== rndis_host: handle bogus MAC addresses in ZTE RNDIS devices When porting support of ZTE MF286R to OpenWrt [1], it was discovered, that its built-in LTE modem fails to adjust its target MAC address, when a random MAC address is assigned to the interface, due to detection of "locally-administered address" bit. This leads to dropping of ingress trafficat the host. The modem uses RNDIS as its primary interface, with some variants exposing both of them simultaneously. Then it was discovered, that cdc_ether driver contains a fixup for that exact issue, also appearing on CDC ECM interfaces. I discussed how to proceed with that with Bjørn Mork at OpenWrt forum [3], with the first approach would be to trust the locally-administered MAC again, and add a quirk for the problematic ZTE devices, as suggested by Kristian Evensen. before [4], but reusing the fixup from cdc_ether looks like a safer and more generic solution. Finally, according to Bjørn's suggestion. limit the scope of bogus MAC addressdetection to ZTE devices, the same way as it is done in cdc_ether, as this trait wasn't really observed outside of ZTE devices. Do that for both flavours of RNDIS devices, with interface classes 02/02/ff and e0/01/03, as both types are reported by different modems. [1] https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=7ac8da00609f42b8aba74b7efc6b0d055b7cef3e [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=bfe9b9d2df669a57a95d641ed46eb018e204c6ce [3] https://forum.openwrt.org/t/problem-with-modem-in-zte-mf286r/120988 [4] https://lore.kernel.org/all/CAKfDRXhDp3heiD75Lat7cr1JmY-kaJ-MS0tt7QXX=s8RFjbpUQ@mail.gmail.com/T/ Cc: Bjørn Mork <bjorn@mork.no> Cc: Kristian Evensen <kristian.evensen@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> v3: Fixed wrong identifier commit description and whitespace in patch 2. v2: ensure that MAC fixup is applied to all Ethernet frames in RNDIS batch, by introducing a driver flag, and integrating the fixup inside rndis_rx_fixup(). ==================== Link: https://lore.kernel.org/r/20220413014416.2306843-1-lech.perczak@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14rndis_host: limit scope of bogus MAC address detection to ZTE devicesLech Perczak1-5/+12
Reporting of bogus MAC addresses and ignoring configuration of new destination address wasn't observed outside of a range of ZTE devices, among which this seems to be the common bug. Align rndis_host driver with implementation found in cdc_ether, which also limits this workaround to ZTE devices. Suggested-by: Bjørn Mork <bjorn@mork.no> Cc: Kristian Evensen <kristian.evensen@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14rndis_host: enable the bogus MAC fixup for ZTE devices from cdc_etherLech Perczak2-0/+33
Certain ZTE modems, namely: MF823. MF831, MF910, built-in modem from MF286R, expose both CDC-ECM and RNDIS network interfaces. They have a trait of ignoring the locally-administered MAC address configured on the interface both in CDC-ECM and RNDIS part, and this leads to dropping of incoming traffic by the host. However, the workaround was only present in CDC-ECM, and MF286R explicitly requires it in RNDIS mode. Re-use the workaround in rndis_host as well, to fix operation of MF286R module, some versions of which expose only the RNDIS interface. Do so by introducing new flag, RNDIS_DRIVER_DATA_DST_MAC_FIXUP, and testing for it in rndis_rx_fixup. This is required, as RNDIS uses frame batching, and all of the packets inside the batch need the fixup. This might introduce a performance penalty, because test is done for every returned Ethernet frame. Apply the workaround to both "flavors" of RNDIS interfaces, as older ZTE modems, like MF823 found in the wild, report the USB_CLASS_COMM class interfaces, while MF286R reports USB_CLASS_WIRELESS_CONTROLLER. Suggested-by: Bjørn Mork <bjorn@mork.no> Cc: Kristian Evensen <kristian.evensen@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14cdc_ether: export usbnet_cdc_zte_rx_fixupLech Perczak2-1/+3
Commit bfe9b9d2df66 ("cdc_ether: Improve ZTE MF823/831/910 handling") introduces a workaround for certain ZTE modems reporting invalid MAC addresses over CDC-ECM. The same issue was present on their RNDIS interface,which was fixed in commit a5a18bdf7453 ("rndis_host: Set valid random MAC on buggy devices"). However, internal modem of ZTE MF286R router, on its RNDIS interface, also exhibits a second issue fixed already in CDC-ECM, of the device not respecting configured random MAC address. In order to share the fixup for this with rndis_host driver, export the workaround function, which will be re-used in the following commit in rndis_host. Cc: Kristian Evensen <kristian.evensen@gmail.com> Cc: Bjørn Mork <bjorn@mork.no> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14EDAC/synopsys: Read the error count from the correct registerShubhrajyoti Datta1-5/+11
Currently, the error count is read wrongly from the status register. Read the count from the proper error count register (ERRCNT). [ bp: Massage. ] Fixes: b500b4a029d5 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller") Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220414102813.4468-1-shubhrajyoti.datta@xilinx.com
2022-04-14x86/asm: Merge load_gs_index()Brian Gerst2-10/+4
Merge the 32- and 64-bit implementations of load_gs_index(). Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220325153953.162643-5-brgerst@gmail.com
2022-04-14perf bench: Fix numa bench to fix usage of affinity for machines with #CPUs > 1KAthira Rajeev1-33/+95
The 'perf bench numa' testcase fails on systems with more than 1K CPUs. Testcase: perf bench numa mem -p 1 -t 3 -P 512 -s 100 -zZ0qcm --thp 1 Snippet of code: <<>> perf: bench/numa.c:302: bind_to_node: Assertion `!(ret)' failed. Aborted (core dumped) <<>> bind_to_node() uses "sched_getaffinity" to save the original cpumask and this call is returning EINVAL ((invalid argument). This happens because the default mask size in glibc is 1024. To overcome this 1024 CPUs mask size limitation of cpu_set_t, change the mask size using the CPU_*_S macros ie, use CPU_ALLOC to allocate cpumask, CPU_ALLOC_SIZE for size. Apart from fixing this for "orig_mask", apply same logic to "mask" as well which is used to setaffinity so that mask size is large enough to represent number of possible CPU's in the system. sched_getaffinity is used in one more place in perf numa bench. It is in "bind_to_cpu" function. Apply the same logic there also. Though currently no failure is reported from there, it is ideal to change getaffinity to work with such system configurations having CPU's more than default mask size supported by glibc. Also fix "sched_setaffinity" to use mask size which is large enough to represent number of possible CPU's in the system. Fixed all places where "bind_cpumask" which is part of "struct thread_data" is used such that bind_cpumask works in all configuration. Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220412164059.42654-3-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-14perf bench: Fix numa testcase to check if CPU used to bind task is onlineAthira Rajeev3-2/+58
Perf numa bench test fails with error: Testcase: ./perf bench numa mem -p 2 -t 1 -P 1024 -C 0,8 -M 1,0 -s 20 -zZq --thp 1 --no-data_rand_walk Failure snippet: <<>> Running 'numa/mem' benchmark: # Running main, "perf bench numa numa-mem -p 2 -t 1 -P 1024 -C 0,8 -M 1,0 -s 20 -zZq --thp 1 --no-data_rand_walk" perf: bench/numa.c:333: bind_to_cpumask: Assertion `!(ret)' failed. <<>> The Testcases uses CPU's 0 and 8. In function "parse_setup_cpu_list", There is check to see if cpu number is greater than max cpu's possible in the system ie via "if (bind_cpu_0 >= g->p.nr_cpus || bind_cpu_1 >= g->p.nr_cpus) {". But it could happen that system has say 48 CPU's, but only number of online CPU's is 0-7. Other CPU's are offlined. Since "g->p.nr_cpus" is 48, so function will go ahead and set bit for CPU 8 also in cpumask ( td->bind_cpumask). bind_to_cpumask function is called to set affinity using sched_setaffinity and the cpumask. Since the CPU8 is not present, set affinity will fail here with EINVAL. Fix this issue by adding a check to make sure that, CPU's provided in the input argument values are online before proceeding further and skip the test. For this, include new helper function "is_cpu_online" in "tools/perf/util/header.c". Since "BIT(x)" definition will get included from header.h, remove that from bench/numa.c Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220412164059.42654-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-14perf test: Add basic perf record testsIan Rogers1-0/+42
Test the --per-thread flag. Test Intel machine state capturing. Suggested-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Bayduraev <alexey.bayduraev@gmail.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20220414014642.3308206-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-14x86/32: Remove lazy GS macrosBrian Gerst9-28/+20
GS is always a user segment now. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220325153953.162643-4-brgerst@gmail.com
2022-04-14ELF: Remove elf_core_copy_kernel_regs()Brian Gerst4-12/+3
x86-32 was the last architecture that implemented separate user and kernel registers. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220325153953.162643-3-brgerst@gmail.com
2022-04-14perf record: Fix per-thread optionAlexey Bayduraev1-5/+17
Per-thread mode doesn't have specific CPUs for events, add checks for this case. Minor fix to a pr_debug by Ian Rogers <irogers@google.com> to avoid an out of bound array access. Fixes: 7954f71689f90cb2 ("perf record: Introduce thread affinity and mmap masks") Reported-by: Ian Rogers <irogers@google.com> Signed-off-by: Alexey Bayduraev <alexey.bayduraev@gmail.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20220414014642.3308206-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-14perf docs: Add man page entry for Arm SPEJames Clark2-1/+219
The SPE integration in Perf has quite a few usability quirks that can't be found by just reading the reference manual. So document this and at the same time add a summary of the feature that is also hard to find elsewhere. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Co-authored-by: Al Grant <al.grant@arm.com> Co-authored-by: Luke Dare <Luke.Dare@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: German Gomez <german.gomez@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220413084021.2556142-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-14virt: sevguest: Fix bool function returning negative valueHaowen Bai1-1/+1
The function enc_payload() is wrongly declared bool but returns an integer value. Correct it. [ bp: Massage commit message. ] Fixes: fce96cf04430 ("virt: Add SEV-SNP guest driver") Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/1649930657-10837-1-git-send-email-baihaowen@meizu.com
2022-04-14x86/process: Fix kernel-doc warning due to a changed function nameJiapeng Chong1-1/+1
Fix the following scripts/kernel-doc warning: arch/x86/kernel/process.c:412: warning: expecting prototype for tss_update_io_bitmap(). Prototype was for native_tss_update_io_bitmap() instead. [ bp: Massage. ] Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220414062110.60343-1-jiapeng.chong@linux.alibaba.com
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.