| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Replace kfree_skb() used in TLV encoded option header parsing with
kfree_skb_reason(). Following functions are involved:
ip6_parse_tlv()
ipv6_hop_ra()
ipv6_hop_ioam()
ipv6_hop_jumbo()
ipv6_hop_calipso()
ipv6_dest_hao()
Most skb drops during this process are regarded as 'InHdrErrors',
as 'IPSTATS_MIB_INHDRERRORS' is used when ip6_parse_tlv() fails,
which make we use 'SKB_DROP_REASON_IP_INHDR' correspondingly.
However, 'IP_INHDR' is a relatively general reason. Therefore, we
can use other reasons with higher priority in some cases. For example,
'SKB_DROP_REASON_UNHANDLED_PROTO' is used for unknown TLV options.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are two call chains for ipv6_hop_jumbo(). The first one is:
ipv6_destopt_rcv() -> ip6_parse_tlv() -> ipv6_hop_jumbo()
On this call chain, the drop statistics will be done in
ipv6_destopt_rcv() with 'IPSTATS_MIB_INHDRERRORS' if ipv6_hop_jumbo()
returns false.
The second call chain is:
ip6_rcv_core() -> ipv6_parse_hopopts() -> ip6_parse_tlv()
And the drop statistics will also be done in ip6_rcv_core() with
'IPSTATS_MIB_INHDRERRORS' if ipv6_hop_jumbo() returns false.
Therefore, the statistics in ipv6_hop_jumbo() is redundant, which
means the drop is counted twice. The statistics in ipv6_hop_jumbo()
is almost the same as the outside, except the
'IPSTATS_MIB_INTRUNCATEDPKTS', which seems that we have to ignore it.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to add the skb drop reasons support to icmpv6_param_prob(),
introduce the function icmpv6_param_prob_reason() and make
icmpv6_param_prob() an inline call to it. This new function will be
used in the following patches.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace kfree_skb() which is used in ip6_forward() and ip_forward()
with kfree_skb_reason().
The new drop reason 'SKB_DROP_REASON_PKT_TOO_BIG' is introduced for
the case that the length of the packet exceeds MTU and can't
fragment.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace kfree_skb() used in ip6_pkt_drop() with kfree_skb_reason().
No new reason is added.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eventually, I find out the handler function for inputting route lookup
fail: ip_error().
The drop reasons we used in ip_error() are almost corresponding to
IPSTATS_MIB_*, and following new reasons are introduced:
SKB_DROP_REASON_IP_INADDRERRORS
SKB_DROP_REASON_IP_INNOROUTES
Isn't the name SKB_DROP_REASON_IP_HOSTUNREACH and
SKB_DROP_REASON_IP_NETUNREACH more accurate? To make them corresponding
to IPSTATS_MIB_*, we keep their name still.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to simply the definition and assignment for
'enum skb_drop_reason', introduce some helpers.
SKB_DR() is used to define a variable of type 'enum skb_drop_reason'
with the 'SKB_DROP_REASON_NOT_SPECIFIED' initial value.
SKB_DR_SET() is used to set the value of the variable. Seems it is
a little useless? But it makes the code shorter.
SKB_DR_OR() is used to set the value of the variable if it is not set
yet, which means its value is SKB_DROP_REASON_NOT_SPECIFIED.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some implementations were returning type `unsigned long`, while others
that fell back to get_cycles() were implicitly returning a `cycles_t` or
an untyped constant int literal. That makes for weird and confusing
code, and basically all code in the kernel already handled it like it
was an `unsigned long`. I recently tried to handle it as the largest
type it could be, a `cycles_t`, but doing so doesn't really help with
much.
Instead let's just make random_get_entropy() return an unsigned long all
the time. This also matches the commonly used `arch_get_random_long()`
function, so now RDRAND and RDTSC return the same sized integer, which
means one can fallback to the other more gracefully.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Theodore Ts'o <tytso@mit.edu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Rather than failing entirely if a copy_to_user() fails at some point,
instead we should return a partial read for the amount that succeeded
prior, unless none succeeded at all, in which case we return -EFAULT as
before.
This makes it consistent with other reader interfaces. For example, the
following snippet for /dev/zero outputs "4" followed by "1":
int fd;
void *x = mmap(NULL, 4096, PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
assert(x != MAP_FAILED);
fd = open("/dev/zero", O_RDONLY);
assert(fd >= 0);
printf("%zd\n", read(fd, x, 4));
printf("%zd\n", read(fd, x + 4095, 4));
close(fd);
This brings that same standard behavior to the various RNG reader
interfaces.
While we're at it, we can streamline the loop logic a little bit.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Veerasenareddy Burru says:
====================
Add octeon_ep driver
This driver implements networking functionality of Marvell's Octeon
PCI Endpoint NIC.
This driver support following devices:
* Network controller: Cavium, Inc. Device b200
V4 -> V5:
- Fix warnings reported by clang.
- Address comments from community reviews.
V3 -> V4:
- Fix warnings and errors reported by "make W=1 C=1".
V2 -> V3:
- Fix warnings and errors reported by kernel test robot:
"Reported-by: kernel test robot <lkp@intel.com>"
V1 -> V2:
- Address review comments on original patch series.
- Divide PATCH 1/4 from the original series into 4 patches in
v2 patch series: PATCH 1/7 to PATCH 4/7.
- Fix clang build errors.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for the following ethtool commands:
ethtool -i|--driver devname
ethtool devname
ethtool -s devname [speed N] [autoneg on|off] [advertise N]
ethtool -S|--statistics devname
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to enable MSI-x and register interrupts.
Add support to process Tx and Rx traffic. Includes processing
Tx completions and Rx refill.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for ndo ops to set MAC address, change MTU, get stats.
Add control path support to set MAC address, change MTU, get stats,
set speed, get and set link mode.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement Tx/Rx ring resource allocation and cleanup.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add mailbox between host and NIC to send control commands from host to
NIC and receive responses and notifications from NIC to host driver,
like link status update.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement hardware resource init and shutdown helper APIs.
This includes hardware Tx/Rx queue init/enable/disable/reset,
non queue interrupt handler that decodes non-queue interrupt type.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add driver framework and device setup and initialization for Octeon
PCI Endpoint NIC.
Add implementation to load module, initilaize, register network device,
cleanup and unload module.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enable Ethernet{0,1} interfaces on RZ/G2UL SMARC EVK.
Ethernet0 pins are muxed with CAN0, CAN1, SSI1 and RSPI1 pins and Ethernet0
device selection is based on the SW1[3] switch position.
Set SW1[3] to position OFF for selecting CAN0, CAN1, SSI1 and RSPI1.
Set SW1[3] to position ON for selecting Ethernet0.
This patch disables Ethernet0 on RZ/G2UL SMARC platform by default.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220402081328.26292-8-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
RZ/G2UL SoM has both 64GB eMMC and microSD connected to SDHI0.
Both these interfaces are mutually exclusive and the SD0 device
selection is based on SW1[2] on SoM module.
Set SW1[2] to position OFF for selecting eMMC
Set SW1[2] to position ON for selecting microSD
This patch enables eMMC on RZ/G2UL SMARC platform by default.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220402081328.26292-7-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable the microSD card slot connected to SDHI1 on the RZ/G2UL SMARC
platform by removing the sdhi1 override which disabled it, and by adding
the necessary pinmux required for SDHI1.
This patch also adds gpios property to vccq_sdhi1 regulator.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220402081328.26292-6-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add Gigabit Ethernet{0,1} nodes to SoC DTSI.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220402081328.26292-5-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add SDHI{0, 1} nodes to RZ/G2UL SoC DTSI.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220402081328.26292-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add scif0 and audio clk pins to soc pinctrl dtsi and drop deleting
the pinctrl-0 and pinctrl-names properties for scif0 node so that
we now actually make use of these properties for scif0.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220402081328.26292-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Fillup the pinctrl(GPIO) stub node in RZ/G2UL SoC DTSI.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220402081328.26292-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add basic support for RZ/G2UL SMARC EVK (based on R9A07G043U11):
- memory
- External input clock
- CPG
- DMA
- SCIF
It shares the same carrier board with RZ/G2L, but the pin mapping is
different. Disable the device nodes which are not tested and delete the
corresponding pinctrl definitions.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220412161314.13800-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add initial DTSI for RZ/G2UL SoC.
Both RZ/G2L and RZ/G2UL uses the same SMARC EVK. Therefore they share
the common dtsi (rz-smarc.dtsi) file. Place holders are added in
device nodes to avoid compilation errors for the devices which have
not been enabled yet on RZ/G2UL SoC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220412161314.13800-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Renesas RZ/G2UL DT Binding Definitions
Clock and reset definitions for the Renesas RZ/G2UL (R9A07G043) SoC,
shared by driver and DT source files.
|
|
On RZ/G2{L,LC} SoM module, gpio for power selection is connected to
P39_1 whereas on RZ/G2UL it is connected to P6_1. So move gpios property
of vccq_sdhi1 regulator from common dtsi to soc specific dtsi.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220401175427.19078-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
RSPI1 (SPI1) interface is available on PMOD0 connector (J1) on the
carrier board. This patch adds pinmux and spi1 nodes to the carrier
board dtsi file and drops deleting pinctl* properties from DTS file.
RSPI1 interface is tested by setting the macro SW_RSPI_CAN to 0.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220401145702.17954-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add the RPC HyperFlash device node along with its partitions to the
common ULCB board DTS file.
Based on a patch in the BSP by Valentine Barshak.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/61a63e819d4296760ca7ae83ef5226a2c4d7bd93.1648548339.git.geert+renesas@glider.be
|
|
Add the RPC HyperFlash device node along with its partitions to the
common Salvator-X(S) board DTS file.
Based on a patch in the BSP by Valentine Barshak.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/cfc6af8a4c42febcc405b7356c38448eec8e29b0.1648548339.git.geert+renesas@glider.be
|
|
Add the RPC HyperFlash device node along with its partitions to the
common Ebisu board DTS file.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b14c769f62211b67d90dbd2f127357756e6cb4fa.1648548339.git.geert+renesas@glider.be
|
|
Add the RPC HyperFlash device node along with its partitions to the
common Draak board DTS file.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/0f3d3018ecfcdce1bce67708708a6d3a98368b10.1648548339.git.geert+renesas@glider.be
|
|
Add device nodes for the SPI Multi I/O Bus Controllers (RPC-IF) on the
various R-Car Gen3 SoCs that do not have support for them yet in their
device trees (R-Car H3, M3-W, M3-W+, M3-N, E3, and D3).
Based on patches in the BSP by Valentine Barshak.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/3231749c7b63df1a2134daabe66446a3e0e5515b.1648548339.git.geert+renesas@glider.be
|
|
Build of intel-speed-select will fail if you run:
$ LDFLAGS="-Wl,--as-needed" /usr/bin/make V=1
...
gcc -O2 -Wall -g -D_GNU_SOURCE -Iinclude -I/usr/include/libnl3 -Wl,--as-needed -lnl-genl-3 -lnl-3 intel-speed-select-in.o -o intel-speed-select
/usr/bin/ld: intel-speed-select-in.o: in function `handle_event':
(...)/linux/tools/power/x86/intel-speed-select/hfi-events.c:189: undefined reference to `nlmsg_hdr'
...
In this case the problem is that order when linking matters when using
the flag -Wl,--as-needed, symbols not used at that point are discarded.
So since intel-speed-select-in.o comes after, at that point the
libraries/symbols are already discarded and then missing/undefined
references are reported.
To fix this, make sure we specify LDFLAGS after the object file.
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Link: https://lore.kernel.org/r/20220404210525.725611-1-herton@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Currently the SMU version only used to determine whether the SMU supports
reading the idle mask. To speed up startup, move it to the first time
the idle mask is read.
This decreases the startup time from ~28500us to 100us.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220411143820.13971-3-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
FCH address is accessed only when looking at s0ix stats.
As this is unnecessary for initialization, move it ito the first
time stats are accessed from sysfs. This descrease startup time
by about 200us.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220411143820.13971-2-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
SMU logging is setup when the device is probed currently.
In analyzing boot performance it was observed that amd_pmc_probe is
taking ~116800us on startup on an OEM platform. This is longer than
expected, and is caused by enabling SMU logging at startup.
As the SMU logging is only needed for debugging, initialize it only upon
use. This decreases the time for amd_pmc_probe to ~28800us.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220411143820.13971-1-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Update hp-wmi driver to address all code style issues reported
by checkpatch.pl script.
All changes were validated on a HP ZBook Workstation,
HP EliteBook x360, and HP EliteBook 850 G8 notebooks.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20220404203626.4311-2-jorge.lopez2@hp.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220324072015.62063-1-jakobkoschel@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Winmate FM07 and FM07P in-vehicle computers have a row of five buttons
below the display. This module adds an input device that delivers key
events when these buttons are pressed.
Signed-off-by: Daniel Beer <daniel.beer@tirotech.co.nz>
Link: https://lore.kernel.org/r/623a110a.1c69fb81.64f39.0118@mx.google.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Nikolay Aleksandrov says:
====================
net: bridge: add flush filtering support
This patch-set adds support to specify filtering conditions for a bulk
delete (flush) operation. This version uses a new nlmsghdr delete flag
called NLM_F_BULK in combination with a new ndo_fdb_del_bulk op which is
used to signal that the driver supports bulk deletes (that avoids
pushing common mac address checks to ndo_fdb_del implementations and
also has a different prototype and parsed attribute expectations, more
info in patch 03). The new delete flag can be used for any RTM_DEL*
type, implementations just need to be careful with older kernels which
are doing non-strict attribute parses. A new rtnl flag
(RTNL_FLAG_BULK_DEL_SUPPORTED) is used to show that the delete supports
NLM_F_BULK. A proper error is returned if bulk delete is not supported.
For old kernels I use the fact that mac address attribute (lladdr) is
mandatory in the classic fdb del case, but it's not allowed if bulk
deleting so older kernels will error out.
Patch 01 and 02 are minor rtnetlink cleanups to make the code easier to
read. They remove hardcoded values and use names instead. Patch 03 uses
BIT() for rtnl flags.
Patch 04 adds the new NLM_F_BULK delete request modifier, patch 05 adds
the new bulk delete flag and checks for it if the delete requests have
NLM_F_BULK set, it also warns if rtnl register is called with a non-delete
kind and the bulk delete flag is set.
Patch 06 adds the new ndo_fdb_del_bulk call. Patch 07 adds NLM_F_BULK
support to rtnl_fdb_del, on such request strict parsing is used only for
the supported attributes, and if the ndo is implemented it's called, the
NTF_SELF/MASTER rules are the same as for the standard rtnl_fdb_del.
Patch 08 implements bridge-specific minimal ndo_fdb_del_bulk call which
uses the current br_fdb_flush to delete all entries. Patch 09 adds
filtering support to the new bridge flush op which supports target
ifindex (port or bridge), vlan id and flags/state mask. Patch 10 adds
ndm state and flags mask attributes which will be used for filtering.
Patch 11 converts ndm state/flags and their masks to bridge-private flags
and fills them in the filter descriptor for matching. Finally patch 12
fills in the target ifindex (after validating it) and vlan id (already
validated by rtnl_fdb_flush) for matching. Flush filtering is needed
because user-space applications need a quick way to delete only a
specific set of entries, e.g. mlag implementations need a way to flush only
dynamic entries excluding externally learned ones or only externally
learned ones without static entries etc. Also apps usually want to target
only a specific vlan or port/vlan combination. The current 2 flush
operations (per port and bridge-wide) are not extensible and cannot
provide such filtering.
I decided against embedding new attrs into the old flush attributes for
multiple reasons - proper error handling on unsupported attributes,
older kernels silently flushing all, need for a second mechanism to
signal that the attribute should be parsed (e.g. using boolopts),
special treatment for permanent entries.
Examples:
$ bridge fdb flush dev bridge vlan 100 static
< flush all static entries on vlan 100 >
$ bridge fdb flush dev bridge vlan 1 dynamic
< flush all dynamic entries on vlan 1 >
$ bridge fdb flush dev bridge port ens16 vlan 1 dynamic
< flush all dynamic entries on port ens16 and vlan 1 >
$ bridge fdb flush dev ens16 vlan 1 dynamic master
< as above: flush all dynamic entries on port ens16 and vlan 1 >
$ bridge fdb flush dev bridge nooffloaded nopermanent self
< flush all non-offloaded and non-permanent entries >
$ bridge fdb flush dev bridge static noextern_learn
< flush all static entries which are not externally learned >
$ bridge fdb flush dev bridge permanent
< flush all permanent entries >
$ bridge fdb flush dev bridge port bridge permanent
< flush all permanent entries pointing to the bridge itself >
Example of a flush call with unsupported netlink attribute (NDA_DST):
$ bridge fdb flush dev bridge vlan 100 dynamic dst
Error: Unsupported attribute.
Example of a flush call on an older kernel:
$ bridge fdb flush dev bridge dynamic
Error: invalid address.
Example of calling PF_UNSPEC RTM_DELNEIGH which doesn't support bulk delete
with NLM_F_BULK set (ip neigh is changed to add the flag):
$ ip n del 192.168.122.5 lladdr 00:11:22:33:44:55 dev ens3
Error: Bulk delete is not supported.
Note that all flags have their negated version (static vs nostatic etc)
and there are some tricky cases to handle like "static" which in flag
terms means fdbs that have NUD_NOARP but *not* NUD_PERMANENT, so the
mask matches on both but we need only NUD_NOARP to be set. That's
because permanent entries have both set so we can't just match on
NUD_NOARP. Also note that this flush operation doesn't treat permanent
entries in a special way (fdb_delete vs fdb_delete_local), it will
delete them regardless if any port is using them. We can extend the api
with a flag to do that if needed in the future.
Patch-sets (in order):
- Initial bulk del infra and fdb flush filtering (this set)
- iproute2 support
- selftests
v4: Add and check for rtnl del bulk supported flag when using
NLM_F_BULK (new patch 05), patches 01 - 03 are also new minor cleanups
to remove use of raw values and make code easier to read, don't
rename br_fdb_flush in patch 08, set port ifindex as flush target if
NDA_IFINDEX is missing and flush was called with port netdev and
NTF_MASTER (patch 12).
v3: Add NLM_F_BULK delete modifier and ndo_fdb_del_bulk callback,
patches 01 - 03 and 06 are new. Patch 04 is changed to implement
bulk_del instead of flush, patches 05, 07 and 08 are adjusted to
use NDA_ attributes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for fdb flush filtering based on destination ifindex and
vlan id. The ifindex must either match a port's device ifindex or the
bridge's. The vlan support is trivial since it's already validated by
rtnl_fdb_del, we just need to fill it in.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for fdb flush filtering based on ndm flags and state. NDM
state and flags are mapped to bridge-specific flags and matched
according to the specified masks. NTF_USE is used to represent
added_by_user flag since it sets it on fdb add and we don't have a 1:1
mapping for it. Only allowed bits can be set, NTF_SELF and NTF_MASTER are
ignored.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add ndm flags/state masks which will be used for bulk delete filtering.
All of these are used by the bridge and vxlan drivers. Also minimal attr
policy validation is added, it is up to ndo_fdb_del_bulk implementers to
further validate them.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the ability to specify exactly which fdbs to be flushed. They are
described by a new structure - net_bridge_fdb_flush_desc. Currently it
can match on port/bridge ifindex, vlan id and fdb flags. It is used to
describe the existing dynamic fdb flush operation. Note that this flush
operation doesn't treat permanent entries in a special way (fdb_delete vs
fdb_delete_local), it will delete them regardless if any port is using
them, so currently it can't directly replace deletes which need to handle
that case, although we can extend it later for that too.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a minimal ndo_fdb_del_bulk implementation which flushes all entries.
Support for more fine-grained filtering will be added in the following
patches.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When NLM_F_BULK is specified in a fdb del message we need to handle it
differently. First since this is a new call we can strictly validate the
passed attributes, at first only ifindex and vlan are allowed as these
will be the initially supported filter attributes, any other attribute
is rejected. The mac address is no longer mandatory, but we use it
to error out in older kernels because it cannot be specified with bulk
request (the attribute is not allowed) and then we have to dispatch
the call to ndo_fdb_del_bulk if the device supports it. The del bulk
callback can do further validation of the attributes if necessary.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new netdev op called ndo_fdb_del_bulk, it will be later used for
driver-specific bulk delete implementation dispatched from rtnetlink. The
first user will be the bridge, we need it to signal to rtnetlink from
the driver that we support bulk delete operation (NLM_F_BULK).
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new rtnl flag (RTNL_FLAG_BULK_DEL_SUPPORTED) which is used to
verify that the delete operation allows bulk object deletion. Also emit
a warning if anyone tries to set it for non-delete kind.
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Menglong Dong
Jason A. Donenfeld
David S. Miller
Veerasenareddy Burru
Biju Das
Geert Uytterhoeven
Herton R. Krzesinski
Mario Limonciello
Jorge Lopez
Jakob Koschel
Daniel Beer
Nikolay Aleksandrov