| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Once there are contention-initiated size transitions, it will be
possible for rcutorture to initiate a transition at the same time
as a contention-initiated transition. This commit therefore creates
a concurrency-safe helper function named srcu_transition_to_big() to
safely initiate size transitions.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds a comment explaining why an unprotected call to
list_add() from srcu_funnel_gp_start() can be safe. TL;DR: It is only
called during very early boot when we don't have no steeking concurrency!
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When an srcu_struct structure is created (but not in a kernel module)
by DEFINE_SRCU() and friends, the per-CPU srcu_data structure is
statically allocated. In all other cases, that structure is obtained
from alloc_percpu(), in which case cleanup_srcu_struct() must invoke
free_percpu() on the resulting ->sda pointer in the srcu_struct pointer.
Which it does.
Except that it also invokes free_percpu() on the ->sda pointer
referencing the statically allocated per-CPU srcu_data structures.
Which free_percpu() is surprisingly OK with.
This commit nevertheless stops cleanup_srcu_struct() from freeing
statically allocated per-CPU srcu_data structures.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
You really shouldn't invoke srcu_torture_stats_print() after invoking
cleanup_srcu_struct(), but there is really no reason to get a
compiler-obfuscated per-CPU-variable NULL pointer dereference as the
diagnostic. This commit therefore checks for NULL ->sda and makes a
more polite console-message complaint in that case.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If an srcu_struct structure defined by tree SRCU's DEFINE_STATIC_SRCU()
is used by a module, sparse will give the following diagnostic:
sparse: symbol '__srcu_struct_nodes_srcu' was not declared. Should it be static?
The problem is that a within-module DEFINE_STATIC_SRCU() must define
a non-static srcu_struct because it is exported by referencing it in a
special '__section("___srcu_struct_ptrs")'. This reference is needed
so that module load and unloading can invoke init_srcu_struct() and
cleanup_srcu_struct(), respectively. Unfortunately, sparse is unaware of
'__section("___srcu_struct_ptrs")', resulting in the above false-positive
diagnostic. To avoid this false positive, this commit therefore creates
a prototype of the srcu_struct with an "extern" keyword.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds an srcu_tree.convert_to_big kernel parameter that either
refuses to convert at all (0), converts immediately at init_srcu_struct()
time (1), or lets rcutorture convert it (2). An addition contention-based
dynamic conversion choice will be added, along with documentation.
[ paulmck: Apply callback-scanning feedback from Neeraj Upadhyay. ]
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
-1 tells use to use the current position, but we check if the file is
a stream regardless of that. Fix up io_kiocb_update_pos() to only
dip into file if we need to. This is both more efficient and also drops
12 bytes of text on aarch64 and 64 bytes on x86-64.
Fixes: b4aec4001595 ("io_uring: do not recalculate ppos unnecessarily")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Parsing of USDT arguments is architecture-specific. On aarch64 it is
relatively easy since registers used are x[0-31] and sp. Format is
slightly different compared to x86_64. Possible forms are:
- "size@[reg[,offset]]" for dereferences, e.g. "-8@[sp,76]" and "-4@[sp]";
- "size@reg" for register values, e.g. "-4@x0";
- "size@value" for raw values, e.g. "-8@1".
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1649690496-1902-2-git-send-email-alan.maguire@oracle.com
|
|
For configurations where snp node tree is not initialized at
init time (added in subsequent commits), srcu_funnel_gp_start()
and srcu_funnel_exp_start() can potential traverse and observe
the snp nodes' transient (uninitialized) states. This can potentially
happen, when init_srcu_struct_nodes() initialization of sdp->mynode
races with srcu_funnel_gp_start() and srcu_funnel_exp_start()
Consider the case below where srcu_funnel_gp_start() observes
sdp->mynode to be not NULL and uses an uninitialized sdp->grpmask
P1 P2
init_srcu_struct_nodes() void srcu_funnel_gp_start(...)
{
for_each_possible_cpu(cpu) {
...
sdp->mynode = &snp_first[...];
for (snp = sdp->mynode;...) struct srcu_node *snp_leaf =
smp_load_acquire(&sdp->mynode)
... if (snp_leaf) {
for (snp = snp_leaf; ...)
...
if (snp == snp_leaf)
snp->srcu_data_have_cbs[idx] |=
sdp->grpmask;
sdp->grpmask =
1 << (cpu - sdp->mynode->grplo);
}
}
Similarly, init_srcu_struct_nodes() and srcu_funnel_exp_start() can
race, where srcu_funnel_exp_start() could observe state of snp lock
before spin_lock_init().
P1 P2
init_srcu_struct_nodes() void srcu_funnel_exp_start(...)
{
srcu_for_each_node_breadth_first(ssp, snp) { for (; ...) {
spin_lock_...(snp, )
spin_lock_init(&ACCESS_PRIVATE(snp, lock));
...
}
for_each_possible_cpu(cpu) {
...
sdp->mynode = &snp_first[...];
To avoid these issues, ensure that snp node tree initialization is
complete i.e. after SRCU_SIZE_WAIT_BARRIER srcu_size_state is reached,
before traversing the tree. Given that srcu_funnel_gp_start() and
srcu_funnel_exp_start() are called within SRCU read side critical
sections, this check is safe, in the sense that all callbacks are
enqueued on CPU0 srcu_cblist until SRCU_SIZE_WAIT_CALL is entered,
and these read side critical sections (containing srcu_funnel_gp_start()
and srcu_funnel_exp_start()) need to complete, before SRCU_SIZE_WAIT_CALL
is reached.
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, tree SRCU relies on the srcu_node structures being initialized
at the same time that the srcu_struct itself is initialized, and thus
use the initial grace-period sequence number as the initial value for
the srcu_node structure's ->srcu_have_cbs[] and ->srcu_gp_seq_needed_exp
fields. Although this has a high probability of also working when the
srcu_node array is allocated and initialized at some random later time,
it would be better to avoid leaving such things to chance.
This commit therefore initializes these fields with 0x2, which is a
recognizable invalid value. It then adds the required checks for this
invalid value in order to avoid confusion on long-running kernels
(especially those on 32-bit systems) that allocate and initialize
srcu_node arrays late in life.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, srcu_funnel_gp_start() tests snp->srcu_have_cbs[idx] and then
separately assigns it to the snp_seq local variable. This commit does
the assignment earlier to simplify the code a bit. While in the area,
this commit also takes advantage of the 100-character line limit to put
the call to srcu_schedule_cbs_sdp() on a single line.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds the numeric and string version of ->srcu_size_state to
the Tree-SRCU-specific portion of the rcutorture output.
[ paulmck: Apply feedback from kernel test robot and Dan Carpenter. ]
[ quic_neeraju: Apply feedback from Jiapeng Chong. ]
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This is just dead code at the moment, and will be used once
the state-transition code is activated.
Because srcu_barrier() must be aware of transition before call_srcu(), the
state machine waits for an SRCU grace period before callbacks are queued
to the non-CPU-0 queues. This requres that portions of srcu_barrier()
be enclosed in an SRCU read-side critical section.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit shrinks the srcu_struct structure by converting its ->node
field from a fixed-size compile-time array to a pointer to a dynamically
allocated array. In kernels built with large values of NR_CPUS that boot
on systems with smaller numbers of CPUs, this can save significant memory.
[ paulmck: Apply kernel test robot feedback. ]
Reported-by: A cast of thousands
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit makes Tree SRCU able to operate without an snp_node
array, that is, when the srcu_data structures' ->mynode pointers
are NULL. This can result in high contention on the srcu_struct
structure's ->lock, but only when there are lots of call_srcu(),
synchronize_srcu(), and synchronize_srcu_expedited() calls.
Note that when there is no snp_node array, all SRCU callbacks use
CPU 0's callback queue. This is optimal in the common case of low
update-side load because it removes the need to search each CPU
for the single callback that made the grace period happen.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, the srcu_funnel_gp_start() walks its local variable snp up the
tree and reloads sdp->mynode whenever it is necessary to check whether
it is still at the leaf srcu_node level. This works, but is a bit more
obtuse than absolutely necessary. In addition, upcoming commits will
dynamically size srcu_struct structures, in which case sdp->mynode will
no longer necessarily be a constant, and this commit helps prepare for
that dynamic sizing.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit fixed a typo in the srcu_node structure's ->srcu_have_cbs
comment. While in the area, redo a couple of comments to take advantage
of 100-character line lengths.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, cleanup_srcu_struct() checks for a grace period in progress,
but it does not check for a grace period that has not yet started but
which might start at any time. Such a situation could result in a
use-after-free bug, so this commit adds a check for a grace period that
is needed but not yet started to cleanup_srcu_struct().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Add dt-binding documentation of dpi for MediaTek MT8186 SoC.
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/1649645584-13186-2-git-send-email-xinlei.lee@mediatek.com/
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Add MT8186 SoC binding to AAL, CCORR, COLOR, DITHER, GAMMA, MUTEX,
OVL, POSTMASK and RDMA.
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220406030009.2357-4-rex-bc.chen@mediatek.com/
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
All single entry cases in mutex can be merged as a single enum.
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220406030009.2357-3-rex-bc.chen@mediatek.com/
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
The SAR node, ap_sar_sensor, needs to be enabled in addition to the i2c
bus it resides on. Let's simplify this by leaving the sensor node
enabled by default while leaving the i2c bus disabled by default. On
boards that use the sensor, we already enable the i2c bus so we can
simply remove the extra bit that enables the sar sensor node. This saves
some lines but is otherwise a non-functional change.
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220325211640.54228-1-swboyd@chromium.org
|
|
Having these pins with outputs is good on a fresh boot because it puts
the boot and reset pins in a known "good" state. Unfortunately, that
conflicts with the fingerprint firmware flashing code. The firmware
flashing process binds and unbinds the cros-ec and spidev drivers and
that reapplies the pin output values after the flashing code has
overridden the gpio values. This causes a problem because we try to put
the device into bootloader mode, bind the spidev driver and that
inadvertently puts it right back into normal boot mode, breaking the
flashing process.
Fix this by removing the outputs. We'll introduce a binding for
fingerprint cros-ec specifically to set the gpios properly via gpio APIs
during cros-ec driver probe instead.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Alexandru M Stan <amstan@chromium.org>
Fixes: 116f7cc43d28 ("arm64: dts: qcom: sc7280: Add herobrine-r1")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220317010640.2498502-2-swboyd@chromium.org
|
|
As mentioned in the previous commit, the kernel misuses sb_frextents in
the incore mount to reflect both incore reservations made by running
transactions as well as the actual count of free rt extents on disk.
This results in the superblock being written to the log with an
underestimate of the number of rt extents that are marked free in the
rtbitmap.
Teaching XFS to recompute frextents after log recovery avoids
operational problems in the current mount, but it doesn't solve the
problem of us writing undercounted frextents which are then recovered by
an older kernel that doesn't have that fix.
Create an incore percpu counter to mirror the ondisk frextents. This
new counter will track transaction reservations and the only time we
will touch the incore super counter (i.e the one that gets logged) is
when those transactions commit updates to the rt bitmap. This is in
contrast to the lazysbcount counters (e.g. fdblocks), where we know that
log recovery will always fix any incorrect counter that we log.
As a bonus, we only take m_sb_lock at transaction commit time.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
I've been observing periodic corruption reports from xfs_scrub involving
the free rt extent counter (frextents) while running xfs/141. That test
uses an error injection knob to induce a torn write to the log, and an
arbitrary number of recovery mounts, frextents will count fewer free rt
extents than can be found the rtbitmap.
The root cause of the problem is a combination of the misuse of
sb_frextents in the incore mount to reflect both incore reservations
made by running transactions as well as the actual count of free rt
extents on disk. The following sequence can reproduce the undercount:
Thread 1 Thread 2
xfs_trans_alloc(rtextents=3)
xfs_mod_frextents(-3)
<blocks>
xfs_attr_set()
xfs_bmap_attr_addfork()
xfs_add_attr2()
xfs_log_sb()
xfs_sb_to_disk()
xfs_trans_commit()
<log flushed to disk>
<log goes down>
Note that thread 1 subtracts 3 from sb_frextents even though it never
commits to using that space. Thread 2 writes the undercounted value to
the ondisk superblock and logs it to the xattr transaction, which is
then flushed to disk. At next mount, log recovery will find the logged
superblock and write that back into the filesystem. At the end of log
recovery, we reread the superblock and install the recovered
undercounted frextents value into the incore superblock. From that
point on, we've effectively leaked thread 1's transaction reservation.
The correct fix for this is to separate the incore reservation from the
ondisk usage, but that's a matter for the next patch. Because the
kernel has been logging superblocks with undercounted frextents for a
very long time and we don't demand that sysadmins run xfs_repair after a
crash, fix the undercount by recomputing frextents after log recovery.
Gating this on log recovery is a reasonable balance (I think) between
correcting the problem and slowing down every mount attempt. Note that
xfs_repair will fix undercounted frextents.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Pass an explicit xfs_mount pointer to the rtalloc query functions so
that they can support transactionless queries.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Remove the open-coded check of O_LARGEFILE. This changes the errno
to be the same as other filesystems; it was changed generically in
2.6.24 but that fix skipped XFS.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
As talked about in commit 61a6262f95e0 ("arm64: dts: qcom: sc7280:
Move herobrine-r0 to its own dts"), herobrine evolved pretty
significantly after -r0 and newer revisions are pretty
different. Nobody needs the old boards to keep working, so let's
delete to avoid the maintenance burden.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308125044.1.I3e4a1a9c102d194698b68661e69efebafec8af1c@changeid
|
|
While scoping signals, we found that the PCIe signals weren't
compliant at bootup. Specifically, the bootloader was setting up PCIe
and leaving it configured, then jumping to the kernel. The kernel was
turning off the regulator while leaving the PCIe clock running, which
was a violation.
In the regulator bindings (and the Linux kernel driver that uses
them), there's currently no way to specify that a GPIO-controlled
regulator should keep its state at bootup. You've got to pick either
"on" or "off". Let's switch it so that the PCIe regulator defaults to
"on" instead of "off". This should be a much safer way to go and
avoids the timing violation. The regulator will still be turned off
later if there are no users.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220310130429.1.Id41fda1d7f5d9230bc45c1b85b06b0fb0ddd29af@changeid
|
|
Add support for Qualcomm's SC7280 CRD rev5 (aka CRD 3.0/3.1).
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220316172814.v1.4.I37bdb77fdd06fb4143056366d7ec35b929528002@changeid
|
|
Not all herobrine boards have a world facing camera or a fingerprint
sensor, disable the regulators that feed these devices by default and
only enable them for the boards that use them.
Similarly the audio configuration can vary between boards, not all
boards have the regulator pp3300_codec, disable it by default.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220316172814.v1.3.Iad21bd53f3ac14956b8dbbf3825fc7ab29abdf97@changeid
|
|
With newer bootloader versions the crd-r3 (aka CRD 1.0 and 2.0) is
identified as a 'piglin' board (like the IDP2 board), instead of 'hoglin'
Add the compatible strings 'google,piglin-rev{3,4}'. The hoglin entries
are kept to make sure the board keeps booting with older bootloader
versions.
The compatible string 'google,piglin' (without revision information) is
still used by the IDP2 board, which is not expected to evolve further.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220316172814.v1.2.Ib0fbb7e5218201c81a2d064ff13c9bc1b0863212@changeid
|
|
There are multiple revisions of CRD boards. The current sc7280-crd.dts
describes revision 3 and 4 (aka CRD 1.0 and 2.0). Support for a newer
version will be added by another patch. Add the revision number to
distinguish it from the versionn. Also add the revision numbers to
the compatible string.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220316172814.v1.1.I2deda8f2cd6adfbb525a97d8fee008a8477b7b0e@changeid
|
|
some panel can't light up with new board with ps8640, switch compatible
panel define to make it workable.
Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com>
Signed-off-by: Ivy Jian <ivyjian417@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220322092524.1.Ied05fc4b996737e3481861c6ab130a706f288412@changeid
|
|
Add the WPSS remoteproc node in dts for
PIL loading.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rakesh Pillai <quic_pillair@quicinc.com>
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220328070701.28551-1-quic_mpubbise@quicinc.com
|
|
Add a basic device tree for the herobrine villager board.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220329105854.v3.2.Iebdb5af0db7d3d6364cb229a27cd7c668f1063ae@changeid
|
|
Add nodes for the two SX9324 SAR proximity sensors. Not all herobrine
boards have these sensors, so leave them disabled by default.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220329105854.v3.1.Icedb2e3cd5e21f3a4ec535ddf756fa44d053b6ed@changeid
|
|
This node should be named sar1-irq-odl, not sar0-irq-odl. Otherwise
we'll overwrite the settings for sar0 with what is intended for sar1,
leading to probe failures for sar1 that are quite confusing.
Fixes: 116f7cc43d28 ("arm64: dts: qcom: sc7280: Add herobrine-r1")
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220324223331.876199-1-swboyd@chromium.org
|
|
'perf test''s shell runner will just run everything in the tests
directory (as long as it's not another directory or does not begin
with a dot), but sometimes you find files in there that are not shell
scripts - perf.data output for example if you do some testing and then
the next time you run perf test it tries to run these.
Check the files are executable so they are actually intended to be test
scripts and not just some "random junk" files there.
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: http://lore.kernel.org/lkml/20220309122859.31487-1-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This change adds the symbol offset to the data exported for each
call-chain entry. This can not be calculated from the script and
only the ip value, and no related mmap information.
In addition, also export the source file and line information, if
available, to avoid an external lookup if this information is needed.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/164554263724.752731.14651017093796049736.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch enables perf jitdump for riscv64 and was tested with V8 on
qemu rv64.
Qemu rv64:
$ perf record -e cpu-clock -c 1000 -g -k mono ./d8_rv64 --perf-prof --no-write-protect-code-memory test.js
$ perf inject -j -i perf.data -o perf.data.jitted
$ perf report -i perf.data.jitted
Output:
To display the perf.data header info, please use --header/--header-only options.
Total Lost Samples: 0
Samples: 87K of event 'cpu-clock'
Event count (approx.): 87974000
Children Self Command Shared Object Symbol
....
0.28% 0.06% d8_rv64 d8_rv64 [.] _ZN2v88internal6WasmJs7InstallEPNS0_7IsolateEb
0.28% 0.00% d8_rv64 d8_rv64 [.] _ZN2v88internal10ParserBaseINS0_6ParserEE22ParseLogicalExpressionEv
0.28% 0.03% d8_rv64 jitted-112-76.so [.] Builtin:InterpreterEntryTrampoline
0.12% 0.00% d8_rv64 d8_rv64 [.] _ZN2v88internal19ContextDeserializer11DeserializeEPNS0_7IsolateENS0_6HandleINS0_13JSGlobalProxyEEENS_33DeserializeInternalFieldsCallbackE
0.12% 0.01% d8_rv64 jitted-112-651.so [.] Builtin:CEntry_Return1_DontSaveFPRegs_ArgvOnStack_NoBuiltinExit
....
Signed-off-by: Eric Lin <eric.lin@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: greentime.hu@sifive.com
Cc: linux-riscv@lists.infradead.org
Link: http://lore.kernel.org/lkml/20220406142606.18464-2-eric.lin@sifive.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The seq argument is assigned to meta.seq twice, the second one is
redundant, remove it.
This patch also removes a redundant space in bpf_iter_link_attach().
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220410060020.307283-1-ytcoode@gmail.com
|
|
In 7b94b53db34f ("PCI/P2PDMA: Add Intel Sky Lake-E Root Ports B, C, D to
the whitelist"), Andrew Maier added Skylake-E 2031, 2032, and 2033 Root
Ports to the pci_p2pdma_whitelist[], so we assume P2PDMA between devices
below these ports works.
Previously we only checked the whitelist for a device at devfn 00.0 on the
root bus, which is often a "host bridge". But these Skylake Root Ports may
be at any devfn and there may be no "host bridge" device.
Generalize pci_host_bridge_dev() so we check the first device on the root
bus, whether it is devfn 00.0 or a PCIe Root Port, against the whitelist.
[bhelgaas: commit log, comment]
Link: https://lore.kernel.org/r/20220410105213.690-2-shlomop@pliops.com
Tested-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Shlomo Pongratz <shlomop@pliops.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Andrew Maier <andrew.maier@eideticom.com>
|
|
wait_for_completion_timeout() returns unsigned long not int.
It returns 0 if timed out, and positive if completed.
The check for <= 0 is ambiguous and should be == 0 here
indicating timeout which is the only error case.
Fixes: 5720ec0a6d26 ("spi: spi-ti-qspi: Add DMA support for QSPI mmap read")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220411111034.24447-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the new EXPORT_SYMBOL_NS_GPL() for exports from the set of
drivers for cs35l45.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220411165929.1302333-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sound/soc/tegra/tegra186_asrc.c:90:12: error: ‘tegra186_asrc_runtime_resume’ defined but not used [-Werror=unused-function]
static int tegra186_asrc_runtime_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/tegra/tegra186_asrc.c:80:12: error: ‘tegra186_asrc_runtime_suspend’ defined but not used [-Werror=unused-function]
static int tegra186_asrc_runtime_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Mark these functions as __maybe_unused to avoid this kind of warning.
Fixes: a2df8c2d5b36 ("ASoC: tegra: Add Tegra186 based ASRC driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20220411020908.580-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update PCI revision id check for the new YC platform varaint.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20220411134119.1767646-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-15-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-14-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-13-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
Paul E. McKenney
Alexander Aring
Jens Axboe
Alan Maguire
Neeraj Upadhyay
Xinlei Lee
Rex-BC Chen
Stephen Boyd
Darrick J. Wong
Matthew Wilcox (Oracle)
Douglas Anderson
Matthias Kaehlcke
Ivy Jian
Rakesh Pillai
Carsten Haitzler
Eelco Chaudron
Eric Lin
Yuntao Wang
Shlomo Pongratz
Miaoqian Lin
Richard Fitzgerald
YueHaibing
Vijendar Mukunda
Stephen Kitt