| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add an entry for SC7280 SoC.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220321161546.1.Ifc4270fbe9bad536f08a47696e00cca5a0714abd@changeid
|
|
Consumer examples in the bindings of resource providers are trivial,
useless and duplication of code. Remove the example code for consumer.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220407193542.17230-1-krzysztof.kozlowski@linaro.org
|
|
drm-misc-fixes for v5.18-rc2:
- Fix a crash when booting with nouveau on tegra.
- Don't require input port for MIPI-DSI, and make width/height mandatory.
- Fix unregistering of framebuffers without device.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/58fa2262-3eb6-876d-7157-ab7a135696b7@linux.intel.com
|
|
drm-misc-next-fixes for v5.18-rc2:
- fix warning about fence containers
- fix logic error in new fence merge code
- handle empty dma_fence_arrays gracefully
- Try all possible cases for bridge/panel detection.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3b8e6439-612e-f640-e380-51e834393e94@linux.intel.com
|
|
As reported by Naresh:
perf build errors on i386 [1] on Linux next-20220407 [2]
usdt.c:1181:5: error: "__x86_64__" is not defined, evaluates to 0
[-Werror=undef]
1181 | #if __x86_64__
| ^~~~~~~~~~
usdt.c:1196:5: error: "__x86_64__" is not defined, evaluates to 0
[-Werror=undef]
1196 | #if __x86_64__
| ^~~~~~~~~~
cc1: all warnings being treated as errors
Use #ifdef instead of #if to avoid this.
Fixes: 4c59e584d158 ("libbpf: Add x86-specific USDT arg spec parsing logic")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220407203842.3019904-1-andrii@kernel.org
|
|
While checking AF_XDP copy mode combined with busy poll, strange
results were observed. rxdrop and txonly scenarios worked fine, but
l2fwd broke immediately.
After a deeper look, it turned out that for l2fwd, Tx side was exiting
early due to xsk_no_wakeup() returning true and in the end
xsk_generic_xmit() was never called. Note that AF_XDP Tx in copy mode
is syscall steered, so the current behavior is broken.
Txonly scenario only worked due to the fact that
sk_mark_napi_id_once_xdp() was never called - since Rx side is not in
the picture for this case and mentioned function is called in
xsk_rcv_check(), sk::sk_napi_id was never set, which in turn meant that
xsk_no_wakeup() was returning false (see the sk->sk_napi_id >=
MIN_NAPI_ID check in there).
To fix this, prefer busy poll in xsk_sendmsg() only when zero copy is
enabled on a given AF_XDP socket. By doing so, busy poll in copy mode
would not exit early on Tx side and eventually xsk_generic_xmit() will
be called.
Fixes: a0731952d9cd ("xsk: Add busy-poll support for {recv,send}msg()")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220406155804.434493-1-maciej.fijalkowski@intel.com
|
|
driver loading failed on VEGA10 SRIOV VF with linux host due to a wide
range of stolen reserved vram.
Since VEGA10 SRIOV VF need to reserve vram for firmware with windows
Hyper_V host specifically, check hypervisor type to only reserve
memory for it, and the range of the reserved vram can be limited
to between 5M-7M area.
Fixes: faad5ccac1eaae ("drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.")
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check that adev->gfx.ras is valid before using it.
Fixes: 6475ae2b742876 ("drm/amdgpu: add UTCL2 RAS poison query for Aldebaran (v2)")
CC: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Smatch reports this issue
hdcp1_execution.c:500:29: warning: function
'mod_hdcp_hdcp1_dp_execution' with external linkage
has definition
The storage-class-specifier extern is not needed in a
definition, so remove it.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enabling gfxoff quirk results in perfectly usable graphical user
interface on MacBook Pro (15-inch, 2019) with Radeon Pro Vega 20 4 GB.
Without the quirk, X server is completely unusable as every few seconds
there is gpu reset due to ring gfx timeout.
Signed-off-by: Tomasz Moń <desowin@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DP/HDMI audio on AMD PRO VII stops working after S3:
[ 149.450391] amdgpu 0000:63:00.0: amdgpu: MODE1 reset
[ 149.450395] amdgpu 0000:63:00.0: amdgpu: GPU mode1 reset
[ 149.450494] amdgpu 0000:63:00.0: amdgpu: GPU psp mode1 reset
[ 149.983693] snd_hda_intel 0000:63:00.1: refused to change power state from D0 to D3hot
[ 150.003439] amdgpu 0000:63:00.0: refused to change power state from D0 to D3hot
...
[ 155.432975] snd_hda_intel 0000:63:00.1: CORB reset timeout#2, CORBRP = 65535
The offending commit is daf8de0874ab5b ("drm/amdgpu: always reset the asic in
suspend (v2)"). Commit 34452ac3038a7 ("drm/amdgpu: don't use BACO for
reset in S3 ") doesn't help, so the issue is something different.
Assuming that to make HDA resume to D0 fully realized, it needs to be
successfully put to D3 first. And this guesswork proves working, by
moving amdgpu_asic_reset() to noirq callback, so it's called after HDA
function is in D3.
Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Drop the trailing vcn.
Fixes: afc2f276057ea1 ("drm/amdgpu/vcn: add vcn support for vcn 3.1.2")
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
"Pre-multiplied" is the default pixel blend mode for KMS/DRM, as
documented in supported_modes of drm_plane_create_blend_mode_property():
https://cgit.freedesktop.org/drm/drm-misc/tree/drivers/gpu/drm/drm_blend.c
In this mode, both 'pixel alpha' and 'plane alpha' participate in the
calculation, as described by the pixel blend mode formula in KMS/DRM
documentation:
out.rgb = plane_alpha * fg.rgb +
(1 - (plane_alpha * fg.alpha)) * bg.rgb
Considering the blend config mechanisms we have in the driver so far,
the alpha mode that better fits this blend mode is the
_PER_PIXEL_ALPHA_COMBINED_GLOBAL_GAIN, where the value for global_gain
is the plane alpha (global_alpha).
With this change, alpha property stops to be ignored. It also addresses
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1734
v2:
* keep the 8-bit value for global_alpha_value (Nicholas)
* correct the logical ordering for combined global gain (Nicholas)
* apply to dcn10 too (Nicholas)
Signed-off-by: Melissa Wen <mwen@igalia.com>
Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use rcu_read_lock to read p->event_idr concurrently with other readers
and writers. Use p->event_mutex only for creating and destroying events
and in kfd_wait_on_events.
Protect the contents of the kfd_event structure with a per-event
spinlock that can be taken inside the rcu_read_lock critical section.
This eliminates contention of p->event_mutex in set_event, which tends
to be on the critical path for dispatch latency even when busy waiting
is used. It also eliminates lock contention in event interrupt handlers.
Since the p->event_mutex is now used much less, the impact of requiring
it in kfd_wait_on_events should also be much smaller.
This should improve event handling latency for processes using multiple
GPUs concurrently.
v2: Reschedule the worker periodically to avoid soft lockup warnings
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Sean Keely <Sean.Keely@amd.com> # v1
Tested-by: Sanjay Tripathi <sanjay.tripathi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The client and server have different requirements for their memory
allocation, so move the allocation of the send buffer out of the socket
send code that is common to both.
Reported-by: NeilBrown <neilb@suse.de>
Fixes: b2648015d452 ("SUNRPC: Make the rpciod and xprtiod slab allocation modes consistent")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The allocation is done with GFP_KERNEL, but it could still fail in a low
memory situation.
Fixes: 4a85a6a3320b ("SUNRPC: Handle TCP socket sends with kernel_sendpage() again")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
If the call to rpc_alloc_task() fails, then ensure that the calldata is
released, and that rpc_run_task() and rpc_run_bc_task() bail out early.
Reported-by: NeilBrown <neilb@suse.de>
Fixes: 910ad38697d9 ("NFS: Fix memory allocation in rpc_alloc_task()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Ensure the call to rpc_run_task() cannot fail by preallocating the
rpc_task.
Fixes: 910ad38697d9 ("NFS: Fix memory allocation in rpc_alloc_task()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
If rpc_run_task() fails due to an allocation error, then bail out early.
Fixes: 910ad38697d9 ("NFS: Fix memory allocation in rpc_alloc_task()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
We need to handle ENFILE, ENOBUFS, and ENOMEM, because
xprt_wake_pending_tasks() can be called with any one of these due to
socket creation failures.
Fixes: b61d59fffd3e ("SUNRPC: xs_tcp_connect_worker{4,6}: merge common code")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Both call_transmit() and call_bc_transmit() can now return ENOMEM, so
let's make sure that we handle the errors gracefully.
Fixes: 0472e4766049 ("SUNRPC: Convert socket page send code to use iov_iter()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The commit 5c60e89e71f8 ("NFSv4.2: Fix up an invalid combination of memory
allocation flags") has stripped GFP_KERNEL_ACCOUNT down to GFP_KERNEL,
however, it forgot to remove SLAB_ACCOUNT from kmem_cache allocation.
It means that memory is still limited by kmemcg. This patch also fix a
NULL pointer reference issue [1] reported by NeilBrown.
Link: https://lore.kernel.org/all/164870069595.25542.17292003658915487357@noble.neil.brown.name/ [1]
Fixes: 5c60e89e71f8 ("NFSv4.2: Fix up an invalid combination of memory allocation flags")
Fixes: 5abc1e37afa0 ("mm: list_lru: allocate list_lru_one only when needed")
Reported-by: NeilBrown <neilb@suse.de>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
We must ensure that all sockets are closed before we call xprt_free()
and release the reference to the net namespace. The problem is that
calling fput() will defer closing the socket until delayed_fput() gets
called.
Let's fix the situation by allowing rpciod and the transport teardown
code (which runs on the system wq) to call __fput_sync(), and directly
close the socket.
Reported-by: Felix Fu <foyjog@gmail.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: a73881c96d73 ("SUNRPC: Fix an Oops in udp_poll()")
Cc: stable@vger.kernel.org # 5.1.x: 3be232f11a3c: SUNRPC: Prevent immediate close+reconnect
Cc: stable@vger.kernel.org # 5.1.x: 89f42494f92f: SUNRPC: Don't call connect() more than once on a TCP socket
Cc: stable@vger.kernel.org # 5.1.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Both xxhash() and hash_64() appear to give similarly low collision
rates with a standard linearly increasing readdir offset. They both give
similarly higher collision rates when applied to ext4's offsets.
So switch to using the standard hash_64().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
When running as a Xen PV guest use the extra memory (memory which isn't
allocated for the guest at boot time) only for ballooning purposes and
not for zone device allocations. This will remove some code without any
lack of functionality.
While at it move some code to get rid of another #ifdef.
Remove a comment which is stale since some time now.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220407093857.1485-1-jgross@suse.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
of_parse_phandle returns node pointer with refcount incremented,
use of_node_put() on it when done.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fixes dtbs_check warnings like:
$nodename:0: 'intc@fffed000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220317115705.450427-2-krzysztof.kozlowski@canonical.com
|
|
Fixes dtbs_check warnings like:
gic@1000: $nodename:0: 'gic@1000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220317115705.450427-1-krzysztof.kozlowski@canonical.com
|
|
Convert all hex addresses in node unit addresses to lower case to fix
dt_binding_check and dtc W=1 warnings.
Conversion was done using sed:
$ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm/boot/dts/nspire*
$ sed -e 's/<0x\([a-zA-Z0-9_-]*\) /<0x\L\1 /g' -i arch/arm/boot/dts/nspire*
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220317115542.450032-2-krzysztof.kozlowski@canonical.com
|
|
Based on experimental tests, Huawei Matebook D15 actually uses
both gpio0 and gpio1: the first one controls the speaker, while
the other one controls the headphone.
Also, the headset is mapped as MIC1, instead of MIC2.
So, add a quirk for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/d678aef9fc9a07aced611aa7cb8c9b800c649e5a.1649357263.git.mchehab@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The headset/internal mic can either be routed as mic1/mic2
or vice-versa.
By default, the driver assumes that the headset is mapped as
mic2, but not all devices map this way.
So, add a quirk to support changing it to mic1, using mic2
for the internal analog mic (if any).
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/5d88fc29b79be7ab77dae391c8e5ee929fd36c27.1649357263.git.mchehab@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some devices may use both gpio0 and gpio1 to independently switch
the speaker and the headphone.
Add support for that.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/535454c0c598a8454487fe29b164527370e2db81.1649357263.git.mchehab@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In preparation for the support of an additional gpio for headphone
control, rename GPIOs to make explicit references to speakers and
gpio0 or gpio1.
No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/3008c576ca45d5cc99ad4a18d1d30de45a0aff80.1649357263.git.mchehab@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The node names should be generic and SPI NOR dtschema expects "flash".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220407143405.295907-1-krzysztof.kozlowski@linaro.org
|
|
The node names should be generic and SPI NOR dtschema expects "flash".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The node names should be generic and SPI NOR dtschema expects "flash".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
link could be null but still dereference bpf_link__destroy(&link->link)
and it will lead to a null pointer access.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1649299098-2069-1-git-send-email-baihaowen@meizu.com
|
|
Alan Maguire says:
====================
Follow-up series to [1] to address some suggestions from Andrii to
improve parsing and make it more robust (patches 1, 2) and to improve
validation of u[ret]probe firing by validating expected argument
and return values (patch 3).
[1] https://lore.kernel.org/bpf/164903521182.13106.12656654142629368774.git-patchwork-notify@kernel.org/
Changes since v1:
- split library name, auto-attach parsing into separate patches (Andrii, patches 1, 2)
- made str_has_sfx() static inline, avoided repeated strlen()s by storing lengths,
used strlen() instead of strnlen() (Andrii, patch 1)
- fixed sscanf() arg to use %li, switched logging to use "prog '%s'" format,
used direct strcmp() on probe_type instead of prefix check (Andrii, patch 2)
- switched auto-attach tests to log parameter/return values to be checked by
user-space side of tests. Needed to add pid filtering to avoid capturing
stray malloc()s (Andrii, patch 3)
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
uprobe/uretprobe tests don't do any validation of arguments/return values,
and without this we can't be sure we are attached to the right function,
or that we are indeed attached to a uprobe or uretprobe. To fix this
record argument and return value for auto-attached functions and ensure
these match expectations. Also need to filter by pid to ensure we do
not pick up stray malloc()s since auto-attach traces libc system-wide.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1649245431-29956-4-git-send-email-alan.maguire@oracle.com
|
|
For uprobe auto-attach, the parsing can be simplified for the SEC()
name to a single sscanf(); the return value of the sscanf can then
be used to distinguish between sections that simply specify
"u[ret]probe" (and thus cannot auto-attach), those that specify
"u[ret]probe/binary_path:function+offset" etc.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1649245431-29956-3-git-send-email-alan.maguire@oracle.com
|
|
In the process of doing path resolution for uprobe attach, libraries are
identified by matching a ".so" substring in the binary_path.
This matches a lot of patterns that do not conform to library.so[.version]
format, so instead match a ".so" _suffix_, and if that fails match a
".so." substring for the versioned library case.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1649245431-29956-2-git-send-email-alan.maguire@oracle.com
|
|
The hisilicon,hi6220-sysctrl, hisilicon,hi6220-mediactrl, and
hisilicon,hi6220-aoctrl controllers are already described in:
Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml
Documentation/devicetree/bindings/arm/hisilicon/controller/hi6220-domain-ctrl.yaml
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220407145802.4060130-1-p.zabel@pengutronix.de
|
|
Convert I2C binding for MediaTek SoCs to Devicetree schema.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220407094753.13282-1-angelogioacchino.delregno@collabora.com
|
|
Adhere to linux kernel coding style.
Reported by checkpatch:
CHECK: Avoid CamelCase: <beaconPeriod>
Signed-off-by: Mahak Gupta <mahak_g@cs.iitr.ac.in>
Link: https://lore.kernel.org/r/20220407120945.31030-1-mahak_g@cs.iitr.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Reported by checkpatch:
CHECK: Please don't use multiple blank lines
Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com>
Link: https://lore.kernel.org/r/20220406154921.15532-1-eng.alaamohamedsoliman.am@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adhere to Linux kernel coding indentation style. Also remove the comments that
became irrelevant after fixing indentation.
Reported by checkpatch:
WARNING: suspect code indent for conditional statements
Signed-off-by: Sevinj Aghayeva <sevinj.aghayeva@gmail.com>
Link: https://lore.kernel.org/r/20220405161643.GA630826@euclid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add vendor prefix for Enclustra GmbH (https://www.enclustra.com).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220406160728.720902-1-krzysztof.kozlowski@linaro.org
|
|
Use sizeof(*pvar) instead of sizeof(struct var) when allocating memory.
This conforms to Linux kernel coding style, improves readability,
and decreases the opportunity for bugs if the pointer variable type is
changed. Issue found by checkpatch messages of the following format:
CHECK: Prefer kzalloc(sizeof(*pvar)...) over kzalloc(sizeof(struct var)...)
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Link: https://lore.kernel.org/r/5b526d8c178d89328de935ff4ff57651bdd8379b.1649233201.git.remckee0@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correct spelling typo.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Link: https://lore.kernel.org/r/edaab7d38893e4f1cbb3c281b617c74fa91f0fe7.1649233201.git.remckee0@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove repeated 'the' in comment to be grammatically correct and
conform to Linux kernel coding style.
Found with checkpatch:
WARNING: Possible repeated word: 'the'
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Link: https://lore.kernel.org/r/e259a035b79c814f871b490aa277bf0dfe23fe11.1649233201.git.remckee0@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Douglas Anderson
Krzysztof Kozlowski
Dave Airlie
Andrii Nakryiko
Maciej Fijalkowski
Yongqiang Sun
Felix Kuehling
Tom Rix
Tomasz Moń
Kai-Heng Feng
Alex Deucher
Melissa Wen
Trond Myklebust
Muchun Song
Juergen Gross
Lv Ruyi
Mauro Carvalho Chehab
Pierre-Louis Bossart
Haowen Bai
Alan Maguire
Philipp Zabel
AngeloGioacchino Del Regno
Mahak Gupta
Alaa Mohamed
Sevinj Aghayeva
Rebecca Mckeever