| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The run-time kernel will need to access the Confidential Computing blob
very early during boot to access the CPUID table it points to. At that
stage, it will be relying on the identity-mapped page table set up by
the boot/compressed kernel, so make sure the blob and the CPUID table it
points to are mapped in advance.
[ bp: Massage. ]
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-38-brijesh.singh@amd.com
|
|
SEV-specific code will need to add some additional mappings, but doing
this within ident_map_64.c requires some SEV-specific helpers to be
exported and some SEV-specific struct definitions to be pulled into
ident_map_64.c. Instead, export add_identity_map() so SEV-specific (and
other subsystem-specific) code can be better contained outside of
ident_map_64.c.
While at it, rename the function to kernel_add_identity_map(), similar
to the kernel_ident_mapping_init() function it relies upon.
No functional changes.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-37-brijesh.singh@amd.com
|
|
SEV-SNP guests will be provided the location of special 'secrets'
'CPUID' pages via the Confidential Computing blob. This blob is
provided to the boot kernel either through an EFI config table entry,
or via a setup_data structure as defined by the Linux Boot Protocol.
Locate the Confidential Computing from these sources and, if found,
use the provided CPUID page/table address to create a copy that the
boot kernel will use when servicing CPUID instructions via a #VC CPUID
handler.
[ bp: s/cpuid/CPUID/ ]
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-36-brijesh.singh@amd.com
|
|
Initial/preliminary detection of SEV-SNP is done via the Confidential
Computing blob. Check for it prior to the normal SEV/SME feature
initialization, and add some sanity checks to confirm it agrees with
SEV-SNP CPUID/MSR bits.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-35-brijesh.singh@amd.com
|
|
The previously defined Confidential Computing blob is provided to the
kernel via a setup_data structure or EFI config table entry. Currently,
these are both checked for by boot/compressed kernel to access the CPUID
table address within it for use with SEV-SNP CPUID enforcement.
To also enable that enforcement for the run-time kernel, similar
access to the CPUID table is needed early on while it's still using
the identity-mapped page table set up by boot/compressed, where global
pointers need to be accessed via fixup_pointer().
This isn't much of an issue for accessing setup_data, and the EFI config
table helper code currently used in boot/compressed *could* be used in
this case as well since they both rely on identity-mapping. However, it
has some reliance on EFI helpers/string constants that would need to be
accessed via fixup_pointer(), and fixing it up while making it shareable
between boot/compressed and run-time kernel is fragile and introduces a
good bit of ugliness.
Instead, add a boot_params->cc_blob_address pointer that the
boot/compressed kernel can initialize so that the run-time kernel can
access the CC blob from there instead of re-scanning the EFI config
table.
Also document these in Documentation/x86/zero-page.rst. While there,
add missing documentation for the acpi_rsdp_addr field, which serves a
similar purpose in providing the run-time kernel a pointer to the ACPI
RSDP table so that it does not need to [re-]scan the EFI configuration
table.
[ bp: Fix typos, massage commit message. ]
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-34-brijesh.singh@amd.com
|
|
CPUID instructions generate a #VC exception for SEV-ES/SEV-SNP guests,
for which early handlers are currently set up to handle. In the case
of SEV-SNP, guests can use a configurable location in guest memory
that has been pre-populated with a firmware-validated CPUID table to
look up the relevant CPUID values rather than requesting them from
hypervisor via a VMGEXIT. Add the various hooks in the #VC handlers to
allow CPUID instructions to be handled via the table. The code to
actually configure/enable the table will be added in a subsequent
commit.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-33-brijesh.singh@amd.com
|
|
This code will also be used later for SEV-SNP-validated CPUID code in
some cases, so move it to a common helper.
While here, also add a check to terminate in cases where the CPUID
function/subfunction is indexed and the subfunction is non-zero, since
the GHCB MSR protocol does not support non-zero subfunctions.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-32-brijesh.singh@amd.com
|
|
Determining which CPUID leafs have significant ECX/index values is
also needed by guest kernel code when doing SEV-SNP-validated CPUID
lookups. Move this to common code to keep future updates in sync.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-31-brijesh.singh@amd.com
|
|
While launching encrypted guests, the hypervisor may need to provide
some additional information during the guest boot. When booting under an
EFI-based BIOS, the EFI configuration table contains an entry for the
confidential computing blob that contains the required information.
To support booting encrypted guests on non-EFI VMs, the hypervisor
needs to pass this additional information to the guest kernel using a
different method.
For this purpose, introduce SETUP_CC_BLOB type in setup_data to hold
the physical address of the confidential computing blob location. The
boot loader or hypervisor may choose to use this method instead of an
EFI configuration table. The CC blob location scanning should give
preference to a setup_data blob over an EFI configuration table.
In AMD SEV-SNP, the CC blob contains the address of the secrets and
CPUID pages. The secrets page includes information such as a VM to PSP
communication key and the CPUID page contains PSP-filtered CPUID values.
Define the AMD SEV confidential computing blob structure.
While at it, define the EFI GUID for the confidential computing blob.
[ bp: Massage commit message, mark struct __packed. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220307213356.2797205-30-brijesh.singh@amd.com
|
|
Fix a NULL deref crash that occurs when an svc_rqst is deferred
while the sunrpc tracing subsystem is enabled. svc_revisit() sets
dr->xprt to NULL, so it can't be relied upon in the tracepoint to
provide the remote's address.
Unfortunately we can't revert the "svc_deferred_class" hunk in
commit ece200ddd54b ("sunrpc: Save remote presentation address in
svc_xprt for trace events") because there is now a specific check
of event format specifiers for unsafe dereferences. The warning
that check emits is:
event svc_defer_recv has unsafe dereference of argument 1
A "%pISpc" format specifier with a "struct sockaddr *" is indeed
flagged by this check.
Instead, take the brute-force approach used by the svcrdma_qp_error
tracepoint. Convert the dr::addr field into a presentation address
in the TP_fast_assign() arm of the trace event, and store that as
a string. This fix can be backported to -stable kernels.
In the meantime, commit c6ced22997ad ("tracing: Update print fmt
check to handle new __get_sockaddr() macro") is now in v5.18, so
this wonky fix can be replaced with __sockaddr() and friends
properly during the v5.19 merge window.
Fixes: ece200ddd54b ("sunrpc: Save remote presentation address in svc_xprt for trace events")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
page_mapped_in_vma() sets nr_pages to 1, which is usually correct as we
only want to know about the precise page and not about other pages in
the folio. However, hugetlbfs does want to know about the entire hpage,
and using nr_pages to get the size of the hpage is wrong. We could
change page_mapped_in_vma() to special-case hugetlbfs pages, but it's
better to ignore nr_pages in page_vma_mapped_walk() and get the size
from the VMA instead.
Fixes: 2aff7a4755bed ("mm: Convert page_vma_mapped_walk to work on PFNs")
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
[edit commit message, use hstate directly]
|
|
Simplify new_page() by unifying the THP and base page cases, and
handle orders other than 0 and HPAGE_PMD_ORDER correctly.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
This wrapper around alloc_pages_vma() calls prep_transhuge_page(),
removing the obligation from the caller. This is in the same spirit
as __folio_alloc().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
Unify alloc_misplaced_dst_page() and alloc_misplaced_dst_page_thp().
Removes an assumption that compound pages are HPAGE_PMD_ORDER.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
This removes an assumption that a large folio is HPAGE_PMD_ORDER
as well as letting us remove the call to prep_transhuge_page()
and a few hidden calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
Calling try_to_unmap() with TTU_SPLIT_HUGE_PMD and a folio that's not
mapped by a PMD causes oopses on arm64 because we now call page_folio()
on an invalid page. pmd_page() returns a valid page for non-leaf PMDs on
some architectures, so this bug escaped testing before now. Fix this bug
by delaying the call to pmd_page() until after we know the PMD is a leaf.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215804
Fixes: af28a988b313 ("mm/huge_memory: Convert __split_huge_pmd() to take a folio")
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Zorro Lang <zlang@redhat.com>
|
|
The commit 73511edf8b19 ("dma-buf: specify usage while adding fences to
dma_resv obj v7") ported all the DRM drivers to use the newer fence API
that specifies the usage with the enum dma_resv_usage rather than doing
an explicit shared / exclusive distinction.
But the commit didn't do it properly in two callers of the vc4 driver,
leading to build errors.
Fixes: 73511edf8b19 ("dma-buf: specify usage while adding fences to dma_resv obj v7")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407131950.915091-1-javierm@redhat.com
|
|
The SINO WEALTH SH1106 is an OLED display driver that is somewhat
compatible with the SSD1306. It supports a slightly wider display,
at 132 instead of 128 pixels. The basic commands are the same, but
the SH1106 doesn't support the horizontal or vertical address modes.
Add support for this display driver. The default values for some of
the hardware settings are taken from the datasheet.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406172956.3953-5-wens@kernel.org
|
|
On the SINO WEALTH SH1106, which is mostly compatible with the SSD1306,
only the basic page addressing mode is supported. This addressing mode
is not as easy to use compared to the currently supported horizontal
addressing mode, as the page address has to be set prior to writing
out each page, and each page must be written out separately as a result.
Also, there is no way to force the column address to wrap around early,
thus the column address must also be reset for each page to be accurate.
Add support for this addressing mode, with a flag to choose it. This
flag is designed to be set from the device info data structure, but
can be extended to be explicitly forced on through a device tree
property if such a need arises.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406172956.3953-4-wens@kernel.org
|
|
The SINO WEALTH SH1106 is an OLED display driver that is somewhat
compatible with the SSD1306. It supports a slightly wider display,
at 132 instead of 128 pixels. The basic commands are the same, but
the SH1106 doesn't support the horizontal or vertical address modes.
Add a compatible string for it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406172956.3953-3-wens@kernel.org
|
|
Add a vendor prefix entry for SINO WEALTH Eletronics Ltd.
(http://www.sinowealth.com).
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406172956.3953-2-wens@kernel.org
|
|
Freq caps (i.e. RP0, RP1 and RPn frequencies) are read from HW. However the
formats (bit positions, widths, registers and units) of these vary for
different generations with even more variations arriving in the future. In
order not to have to do identical computation for these caps in multiple
places, here we centralize the computation of these caps. This makes the
code cleaner and also more extensible for the future.
v2: Clarify that caps are in "hw units" in comments (Lucas De Marchi)
v3: Minor checkpatch fix
v4: s/intel_rps_get_freq_caps/gen6_rps_get_freq_caps/ (Badal Nilawar)
v5: Changes comments to kernel doc (Anshuman Gupta)
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406191848.20895-1-ashutosh.dixit@intel.com
|
|
The x86 MSI message data is 32 bits in total and is either in
compatibility or remappable format, see Intel Virtualization Technology
for Directed I/O, section 5.1.2.
Fixes: 6285aa50736 ("x86/msi: Provide msi message shadow structs")
Co-developed-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Reto Buerki <reet@codelabs.ch>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220407110647.67372-1-reet@codelabs.ch
|
|
This isn't included here any more since the removal of ww_mutex.h from
seqlock.h which causes a build break.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Shashank Sharma <shashank.sharma@amd.com>
Fixes: e84815cbbc76 ("seqlock: drop seqcount_ww_mutex_t")
Link: https://patchwork.freedesktop.org/patch/msgid/20220407114619.961750-1-christian.koenig@amd.com
|
|
Merge series from cy_huang <u0084500@gmail.com>:
This patch series add Richtek RT5759 buck converter support.
|
|
The original 'ima' measurement list template contains a hash, defined
as 20 bytes, and a null terminated pathname, limited to 255
characters. Other measurement list templates permit both larger hashes
and longer pathnames. When the "ima" template is configured as the
default, a new measurement list template (ima_template=) must be
specified before specifying a larger hash algorithm (ima_hash=) on the
boot command line.
To avoid this boot command line ordering issue, remove the legacy "ima"
template configuration option, allowing it to still be specified on the
boot command line.
The root cause of this issue is that during the processing of ima_hash,
we would try to check whether the hash algorithm is compatible with the
template. If the template is not set at the moment we do the check, we
check the algorithm against the configured default template. If the
default template is "ima", then we reject any hash algorithm other than
sha1 and md5.
For example, if the compiled default template is "ima", and the default
algorithm is sha1 (which is the current default). In the cmdline, we put
in "ima_hash=sha256 ima_template=ima-ng". The expected behavior would be
that ima starts with ima-ng as the template and sha256 as the hash
algorithm. However, during the processing of "ima_hash=",
"ima_template=" has not been processed yet, and hash_setup would check
the configured hash algorithm against the compiled default: ima, and
reject sha256. So at the end, the hash algorithm that is actually used
will be sha1.
With template "ima" removed from the configured default, we ensure that
the default tempalte would at least be "ima-ng" which allows for
basically any hash algorithm.
This change would not break the algorithm compatibility checks for IMA.
Fixes: 4286587dccd43 ("ima: add Kconfig default measurement list template")
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Reset controller fixes for v5.18
Document the deprecated 'hisi,rst-syscon' device tree property for
hisilicon,hi3660-reset, add an error check to reset deassertion in
reset-rzg2l-usbphy-ctrl, restore transfer error handling in Tegra
reset-bpmp, and document the optional 'resets' device tree property
for socionext,uniphier-reset.
* tag 'reset-fixes-for-v5.18' of git://git.pengutronix.de/pza/linux:
dt-bindings: reset: Add parent "resets" property as optional
reset: tegra-bpmp: Restore Handle errors in BPMP response
reset: renesas: Check return value of reset_control_deassert()
dt-bindings: reset: document deprecated HiSilicon property
Link: https://lore.kernel.org/r/20220406153337.1265414-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The DHCOM SoM has two options for supplying ETHRX clock to the DWMAC
block and PHY. Either (1) ETHCK_K generates 50 MHz clock on ETH_CLK
pad for the PHY and the same 50 MHz clock are fed back to ETHRX via
internal eth_clk_fb clock connection OR (2) ETH_CLK is not used at
all, MCO2 generates 50 MHz clock on MCO2 output pad for the PHY and
the same MCO2 clock are fed back into ETHRX via ETH_RX_CLK input pad
using external pad-to-pad connection.
Option (1) has two downsides. ETHCK_K is supplied directly from either
PLL3_Q or PLL4_P, hence the PLL output is limited to exactly 50 MHz and
since the same PLL output is also used to supply SDMMC blocks, the
performance of SD and eMMC access is affected. The second downside is
that using this option, the EMI of the SoM is higher.
Option (2) solves both of those problems, so implement it here. In this
case, the PLL4_P is no longer limited and can be operated faster, at
100 MHz, which improves SDMMC performance (read performance is improved
from ~41 MiB/s to ~57 MiB/s with dd if=/dev/mmcblk1 of=/dev/null bs=64M
count=1). The EMI interference also decreases.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Christophe Roullier <christophe.roullier@foss.st.com>
Cc: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Tested-by: Johann Neuhauser <jneuhauser@dh-electronics.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add pinmux option for MCO2 pin. This is used on DHCOM when the
ethernet PHY 50 MHz clock is generated by the MCO2 on PG2 pin.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Christophe Roullier <christophe.roullier@foss.st.com>
Cc: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Tested-by: Johann Neuhauser <jneuhauser@dh-electronics.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add another mux option for ethernet0 pins, this is used on DHCOM when
the ethernet PHY 50 MHz clock is generated by the MCO2 on PG2 pin and
then fed back via PA1 pin.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Christophe Roullier <christophe.roullier@foss.st.com>
Cc: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Tested-by: Johann Neuhauser <jneuhauser@dh-electronics.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Boolean properties in DT are present or not present and don't take a value.
A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't
matter.
It may have been intended that 0 values are false, but there is no change
in behavior with this patch.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/Yk3m92Sj26/v1mLG@robh.at.kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The common touchscreen properties are all 32-bit, not 16-bit. These
properties must not be too important as they are all ignored in case of an
error reading them.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/Yk3moe6Hz8ELM0iS@robh.at.kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Boolean properties in DT are present or not present and don't take a value.
A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't
matter.
It may have been intended that 0 values are false, but there is no change
in behavior with this patch.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/Yk3mR5yae3gCkKhp@robh.at.kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Boolean properties in DT are present or not present and don't take a value.
A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't
matter.
It may have been intended that 0 values are false, but there is no change
in behavior with this patch.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/Yk3nShkFzNJaI3/Z@robh.at.kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Boolean properties in DT are present or not present and don't take a value.
A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't
matter.
It may have been intended that 0 values are false, but there is no change
in behavior with this patch.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/Yk3leykDEKGBN8rk@robh.at.kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Missed the defconfig when removing the board files causing
failures in builds using this defconfig.
Fixes: 28f74201e37c ("ARM: pxa: remove Intel Imote2 and Stargate 2 boards")
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220405135252.10283-1-Jonathan.Cameron@huawei.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Memory controller drivers - fixes for v5.18
Issues in v5.18:
1. Freescale/NXP: fix populating children of Integrated Flash Controller
DT nodes.
Issues existing before:
1. Renesas: fix platform-device leak in probe's error path.
2. Atmel: fix of_node reference leak in probe's error path.
3. Synopsys: correct the bindings for snps,ddrc-3.80a (interrupts are
required).
* tag 'memory-controller-drv-fixes-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: fsl_ifc: populate child nodes of buses and mfd devices
dt-bindings: memory: snps,ddrc-3.80a compatible also need interrupts
memory: atmel-ebi: Fix missing of_node_put in atmel_ebi_probe
memory: renesas-rpc-if: fix platform-device leak in error path
Link: https://lore.kernel.org/r/20220407081448.113208-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Samsung fixes for v5.18
Update Krzysztof Kozlowski's email address in multiple maintainer
entries. The old one @canonical.com bounces already.
* tag 'samsung-fixes-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
MAINTAINERS: update Krzysztof Kozlowski's email to Linaro
dt-bindings: update Krzysztof Kozlowski's email
Link: https://lore.kernel.org/r/20220407080545.112290-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ARM Vexpress fixes for 5.18
Couple of fixes to address negative array index access and kernel-doc
build warnings.
* tag 'vexpress-fixes-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
ARM: vexpress/spc: Fix all the kernel-doc build warnings
ARM: vexpress/spc: Fix kernel-doc build warning for ve_spc_cpu_in_wfi
ARM: vexpress/spc: Avoid negative array index when !SMP
Link: https://lore.kernel.org/r/20220407110828.1436206-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Arm SCMI firmware interface fixes for v5.18
Few fixes to address assorted set of issues:
- Erroneous clearing of Tx channel which only platform firmware must do
- Invalid point access pass as parameter to sort() in clock support
- Sparse build warnings in OPTEE transport driver
- Use of deprecated zero-length arrays
* tag 'scmi-fixes-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix sparse warnings in OPTEE transport driver
firmware: arm_scmi: Replace zero-length array with flexible-array member
firmware: arm_scmi: Fix sorting of retrieved clock rates
firmware: arm_scmi: Remove clear channel call on the TX channel
Link: https://lore.kernel.org/r/20220407110818.1436181-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fix sparse warning:
arch/arm/mach-ep93xx/clock.c:210:35: sparse: sparse: Using plain integer as NULL pointer
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/TLFJ6D7WGMDJSQ6XK7UZE4XR2PLRZJSV/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
arch/arm/mach-ep93xx/clock.c:154:2: warning: Use of memory after it is freed [clang-analyzer-unix.Malloc]
arch/arm/mach-ep93xx/clock.c:151:2: note: Taking true branch
if (IS_ERR(clk))
^
arch/arm/mach-ep93xx/clock.c:152:3: note: Memory is released
kfree(psc);
^~~~~~~~~~
arch/arm/mach-ep93xx/clock.c:154:2: note: Use of memory after it is freed
return &psc->hw;
^ ~~~~~~~~
Fixes: 9645ccc7bd7a ("ep93xx: clock: convert in-place to COMMON_CLK")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/B5YCO2NJEXINCYE26Y255LCVMO55BGWW/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Daniel pointed out that this series removes the last user of
seqcount_ww_mutex_t, so let's drop this.
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: linux-kernel@vger.kernel.org
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-16-christian.koenig@amd.com
|
|
This should be possible now since we don't have the distinction
between exclusive and shared fences any more.
The only possible pitfall is that a dma_fence would be reused during the
RCU grace period, but even that could be handled with a single extra check.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-15-christian.koenig@amd.com
|
|
This is now handled by the DMA-buf framework in the dma_resv obj.
Also remove the workaround inside VMWGFX to update the moving fence.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-14-christian.koenig@amd.com
|
|
That should now be handled by the common dma_resv framework.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-13-christian.koenig@amd.com
|
|
We have previously done that in the individual drivers but it is
more defensive to move that into the common code.
Dynamic attachments should wait for map operations to complete by themselves.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-12-christian.koenig@amd.com
|
|
Add an usage for submissions independent of implicit sync but still
interesting for memory management.
v2: cleanup the kerneldoc a bit
v3: separate amdgpu changes from this
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-10-christian.koenig@amd.com
|
|
We only need to wait for kernel submissions here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-9-christian.koenig@amd.com
|
|
Always wait for kernel fences before kmap and not only for UVD kmaps.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-7-christian.koenig@amd.com
|
Michael Roth
Brijesh Singh
Chuck Lever
zhenwei pi
Matthew Wilcox (Oracle)
Javier Martinez Canillas
Chen-Yu Tsai
Ashutosh Dixit
Reto Buerki
Christian König
Mark Brown
GUO Zihua
Arnd Bergmann
Marek Vasut
Rob Herring
Jonathan Cameron
Alexander Sverdlin