| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
early_set_memory_{encrypted,decrypted}() are used for changing the page
state from decrypted (shared) to encrypted (private) and vice versa.
When SEV-SNP is active, the page state transition needs to go through
additional steps.
If the page is transitioned from shared to private, then perform the
following after the encryption attribute is set in the page table:
1. Issue the page state change VMGEXIT to add the page as a private
in the RMP table.
2. Validate the page after its successfully added in the RMP table.
To maintain the security guarantees, if the page is transitioned from
private to shared, then perform the following before clearing the
encryption attribute from the page table.
1. Invalidate the page.
2. Issue the page state change VMGEXIT to make the page shared in the
RMP table.
early_set_memory_{encrypted,decrypted}() can be called before the GHCB
is setup so use the SNP page state MSR protocol VMGEXIT defined in the
GHCB specification to request the page state change in the RMP table.
While at it, add a helper snp_prep_memory() which will be used in
probe_roms(), in a later patch.
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-19-brijesh.singh@amd.com
|
|
The SEV-SNP guest is required by the GHCB spec to register the GHCB's
Guest Physical Address (GPA). This is because the hypervisor may prefer
that a guest uses a consistent and/or specific GPA for the GHCB associated
with a vCPU. For more information, see the GHCB specification section
"GHCB GPA Registration".
[ bp: Cleanup comments. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-18-brijesh.singh@amd.com
|
|
The SEV-SNP guest is required by the GHCB spec to register the GHCB's
Guest Physical Address (GPA). This is because the hypervisor may prefer
that a guest use a consistent and/or specific GPA for the GHCB associated
with a vCPU. For more information, see the GHCB specification section
"GHCB GPA Registration".
If hypervisor can not work with the guest provided GPA then terminate the
guest boot.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-17-brijesh.singh@amd.com
|
|
Many of the integrity guarantees of SEV-SNP are enforced through the
Reverse Map Table (RMP). Each RMP entry contains the GPA at which a
particular page of DRAM should be mapped. The VMs can request the
hypervisor to add pages in the RMP table via the Page State Change
VMGEXIT defined in the GHCB specification.
Inside each RMP entry is a Validated flag; this flag is automatically
cleared to 0 by the CPU hardware when a new RMP entry is created for a
guest. Each VM page can be either validated or invalidated, as indicated
by the Validated flag in the RMP entry. Memory access to a private page
that is not validated generates a #VC. A VM must use the PVALIDATE
instruction to validate a private page before using it.
To maintain the security guarantee of SEV-SNP guests, when transitioning
pages from private to shared, the guest must invalidate the pages before
asking the hypervisor to change the page state to shared in the RMP table.
After the pages are mapped private in the page table, the guest must
issue a page state change VMGEXIT to mark the pages private in the RMP
table and validate them.
Upon boot, BIOS should have validated the entire system memory.
During the kernel decompression stage, early_setup_ghcb() uses
set_page_decrypted() to make the GHCB page shared (i.e. clear encryption
attribute). And while exiting from the decompression, it calls
set_page_encrypted() to make the page private.
Add snp_set_page_{private,shared}() helpers that are used by
set_page_{decrypted,encrypted}() to change the page state in the RMP
table.
[ bp: Massage commit message and comments. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-16-brijesh.singh@amd.com
|
|
The Virtual Machine Privilege Level (VMPL) feature in the SEV-SNP
architecture allows a guest VM to divide its address space into four
levels. The level can be used to provide hardware isolated abstraction
layers within a VM. VMPL0 is the highest privilege level, and VMPL3 is
the least privilege level. Certain operations must be done by the VMPL0
software, such as:
* Validate or invalidate memory range (PVALIDATE instruction)
* Allocate VMSA page (RMPADJUST instruction when VMSA=1)
The initial SNP support requires that the guest kernel is running at
VMPL0. Add such a check to verify the guest is running at level 0 before
continuing the boot. There is no easy method to query the current VMPL
level, so use the RMPADJUST instruction to determine whether the guest
is running at the VMPL0.
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-15-brijesh.singh@amd.com
|
|
An SNP-active guest uses the PVALIDATE instruction to validate or
rescind the validation of a guest page’s RMP entry. Upon completion, a
return code is stored in EAX and rFLAGS bits are set based on the return
code. If the instruction completed successfully, the carry flag (CF)
indicates if the content of the RMP were changed or not.
See AMD APM Volume 3 for additional details.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-14-brijesh.singh@amd.com
|
|
Version 2 of the GHCB specification added the advertisement of features
that are supported by the hypervisor. If the hypervisor supports SEV-SNP
then it must set the SEV-SNP features bit to indicate that the base
functionality is supported.
Check that feature bit while establishing the GHCB; if failed, terminate
the guest.
Version 2 of the GHCB specification adds several new Non-Automatic Exits
(NAEs), most of them are optional except the hypervisor feature. Now
that the hypervisor feature NAE is implemented, bump the GHCB maximum
supported protocol version.
While at it, move the GHCB protocol negotiation check from the #VC
exception handler to sev_enable() so that all feature detection happens
before the first #VC exception.
While at it, document why the GHCB page cannot be setup from
load_stage2_idt().
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-13-brijesh.singh@amd.com
|
|
The SEV-ES guest calls sev_es_negotiate_protocol() to negotiate the GHCB
protocol version before establishing the GHCB. Cache the negotiated GHCB
version so that it can be used later.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-12-brijesh.singh@amd.com
|
|
Add config and compile options which allow to compile with z16
optimizations if the compiler supports it.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add detection for machine types 0x3931 and 0x3932 and set ELF platform
name to z16.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The GHCB specification defines the reason code for reason set 0. The
reason codes defined in the set 0 do not cover all possible causes for a
guest to request termination.
The reason sets 1 to 255 are reserved for the vendor-specific codes.
Reserve the reason set 1 for the Linux guest. Define the error codes for
reason set 1 so that one can have meaningful termination reasons and thus
better guest failure diagnosis.
While at it, change sev_es_terminate() to accept a reason set parameter.
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-11-brijesh.singh@amd.com
|
|
The CC_ATTR_GUEST_SEV_SNP can be used by the guest to query whether the
SNP (Secure Nested Paging) feature is active.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-10-brijesh.singh@amd.com
|
|
sme_enable() handles feature detection for both SEV and SME. Future
patches will also use it for SEV-SNP feature detection/setup, which
will need to be done immediately after the first #VC handler is set up.
Move it now in preparation.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-9-brijesh.singh@amd.com
|
|
With upcoming SEV-SNP support, SEV-related features need to be
initialized earlier during boot, at the same point the initial #VC
handler is set up, so that the SEV-SNP CPUID table can be utilized
during the initial feature checks. Also, SEV-SNP feature detection
will rely on EFI helper functions to scan the EFI config table for the
Confidential Computing blob, and so would need to be implemented at
least partially in C.
Currently set_sev_encryption_mask() is used to initialize the
sev_status and sme_me_mask globals that advertise what SEV/SME features
are available in a guest. Rename it to sev_enable() to better reflect
that (SME is only enabled in the case of SEV guests in the
boot/compressed kernel), and move it to just after the stage1 #VC
handler is set up so that it can be used to initialize SEV-SNP as well
in future patches.
While at it, re-implement it as C code so that all SEV feature
detection can be better consolidated with upcoming SEV-SNP feature
detection, which will also be in C.
The 32-bit entry path remains unchanged, as it never relied on the
set_sev_encryption_mask() initialization to begin with.
[ bp: Massage commit message. ]
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-8-brijesh.singh@amd.com
|
|
Update all C code to use the new boot_rdmsr()/boot_wrmsr() helpers
instead of relying on inline assembly.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-7-brijesh.singh@amd.com
|
|
The current set of helpers used throughout the run-time kernel have
dependencies on code/facilities outside of the boot kernel, so there
are a number of call-sites throughout the boot kernel where inline
assembly is used instead. More will be added with subsequent patches
that add support for SEV-SNP, so take the opportunity to provide a basic
set of helpers that can be used by the boot kernel to reduce reliance on
inline assembly.
Use boot_* prefix so that it's clear these are helpers specific to the
boot kernel to avoid any confusion with the various other MSR read/write
helpers.
[ bp: Disambiguate parameter names and trim comment. ]
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-6-brijesh.singh@amd.com
|
|
Now that the clock driver makes sure we never end up with a rate of 0,
the HDMI driver doesn't need to care anymore.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220225143534.405820-13-maxime@cerno.tech
|
|
The HVS core clock isn't really obvious, so let's add a bunch more
comments and some logging for easier debugging.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220225143534.405820-12-maxime@cerno.tech
|
|
Presumably, 'test -s $@ || rm -f $@' intends to remove the output when
the genksyms command fails.
It is unneeded because .DELETE_ON_ERROR automatically removes the output
on failure.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
The genksyms command part in cmd_gensymtypes_{c,S} is duplicated.
Factor it out into the 'genksyms' macro.
For the readability, I slightly refactor the arguments to genksyms.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
Add references to 1) a research paper which provides a definition of
Kconfig semantics, 2) the kismet tool, which checks for unmet direct
dependency bugs in Kconfig specifications.
Signed-off-by: Paul Gazzillo <paul@pgazz.com>
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The alternatives code must be `noinstr` such that it does not patch itself,
as the cache invalidation is only performed after all the alternatives have
been applied.
Mark patch_alternative() as `noinstr`. Mark branch_insn_requires_update()
and get_alt_insn() with `__always_inline` since they are both only called
through patch_alternative().
Booting a kernel in QEMU TCG with KCSAN=y and ARM64_USE_LSE_ATOMICS=y caused
a boot hang:
[ 0.241121] CPU: All CPU(s) started at EL2
The alternatives code was patching the atomics in __tsan_read4() from LL/SC
atomics to LSE atomics.
The following fragment is using LL/SC atomics in the .text section:
| <__tsan_unaligned_read4+304>: ldxr x6, [x2]
| <__tsan_unaligned_read4+308>: add x6, x6, x5
| <__tsan_unaligned_read4+312>: stxr w7, x6, [x2]
| <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304>
This LL/SC atomic sequence was to be replaced with LSE atomics. However since
the alternatives code was instrumentable, __tsan_read4() was being called after
only the first instruction was replaced, which led to the following code in memory:
| <__tsan_unaligned_read4+304>: ldadd x5, x6, [x2]
| <__tsan_unaligned_read4+308>: add x6, x6, x5
| <__tsan_unaligned_read4+312>: stxr w7, x6, [x2]
| <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304>
This caused an infinite loop as the `stxr` instruction never completed successfully,
so `w7` was always 0.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220405104733.11476-1-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This is the final step in defining the multiple save areas to keep them
separate and ensuring proper operation amongst the different types of
guests. Update the SEV-ES/SEV-SNP save area to match the APM. This save
area will be used for the upcoming SEV-SNP AP Creation NAE event support.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-5-brijesh.singh@amd.com
|
|
Because VLV_GT_RENDER_RC6 == GEN6_GT_GFX_RC6, the IS_VALLEYVIEW() check is
not needed. Neither is the check present in other code paths which call
intel_rc6_residency_ns() (in functions gen6_drpc(), rc6_residency() and
rc6_residency_ms_show()).
v2: Elimintate VLV_GT_RENDER_RC6 #define (Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220314161310.6468-1-ashutosh.dixit@intel.com
|
|
The initial implementation of the GHCB spec was based on trying to keep
the register state offsets the same relative to the VM save area. However,
the save area for SEV-ES has changed within the hardware causing the
relation between the SEV-ES save area to change relative to the GHCB save
area.
This is the second step in defining the multiple save areas to keep them
separate and ensuring proper operation amongst the different types of
guests. Create a GHCB save area that matches the GHCB specification.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-4-brijesh.singh@amd.com
|
|
The save area for SEV-ES/SEV-SNP guests, as used by the hardware, is
different from the save area of a non SEV-ES/SEV-SNP guest.
This is the first step in defining the multiple save areas to keep them
separate and ensuring proper operation amongst the different types of
guests. Create an SEV-ES/SEV-SNP save area and adjust usage to the new
save area definition where needed.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220405182743.308853-1-brijesh.singh@amd.com
|
|
It appears that almost traditionally the N variants have deviations
in the register offsets in comparison to S one. This is the case
for Intel Alder Lake as well. Fix register offsets for ADL-N variant.
Fixes: 114b610b9048 ("pinctrl: alderlake: Add Intel Alder Lake-N pin controller support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Remove unnecessary casts.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220329102059.268983-1-yuzhe@nfschina.com
|
|
It is possible to take a stage-2 permission fault on a page larger than
PAGE_SIZE. For example, when running a guest backed by 2M HugeTLB, KVM
eagerly maps at the largest possible block size. When dirty logging is
enabled on a memslot, KVM does *not* eagerly split these 2M stage-2
mappings and instead clears the write bit on the pte.
Since dirty logging is always performed at PAGE_SIZE granularity, KVM
lazily splits these 2M block mappings down to PAGE_SIZE in the stage-2
fault handler. This operation must be done under the write lock. Since
commit f783ef1c0e82 ("KVM: arm64: Add fast path to handle permission
relaxation during dirty logging"), the stage-2 fault handler
conditionally takes the read lock on permission faults with dirty
logging enabled. To that end, it is possible to split a 2M block mapping
while only holding the read lock.
The problem is demonstrated by running kvm_page_table_test with 2M
anonymous HugeTLB, which splats like so:
WARNING: CPU: 5 PID: 15276 at arch/arm64/kvm/hyp/pgtable.c:153 stage2_map_walk_leaf+0x124/0x158
[...]
Call trace:
stage2_map_walk_leaf+0x124/0x158
stage2_map_walker+0x5c/0xf0
__kvm_pgtable_walk+0x100/0x1d4
__kvm_pgtable_walk+0x140/0x1d4
__kvm_pgtable_walk+0x140/0x1d4
kvm_pgtable_walk+0xa0/0xf8
kvm_pgtable_stage2_map+0x15c/0x198
user_mem_abort+0x56c/0x838
kvm_handle_guest_abort+0x1fc/0x2a4
handle_exit+0xa4/0x120
kvm_arch_vcpu_ioctl_run+0x200/0x448
kvm_vcpu_ioctl+0x588/0x664
__arm64_sys_ioctl+0x9c/0xd4
invoke_syscall+0x4c/0x144
el0_svc_common+0xc4/0x190
do_el0_svc+0x30/0x8c
el0_svc+0x28/0xcc
el0t_64_sync_handler+0x84/0xe4
el0t_64_sync+0x1a4/0x1a8
Fix the issue by only acquiring the read lock if the guest faulted on a
PAGE_SIZE granule w/ dirty logging enabled. Add a WARN to catch locking
bugs in future changes.
Fixes: f783ef1c0e82 ("KVM: arm64: Add fast path to handle permission relaxation during dirty logging")
Cc: Jing Zhang <jingzhangos@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220401194652.950240-1-oupton@google.com
|
|
We already sanitize the guest's PSCI version when it is being written by
userspace, rejecting unsupported version numbers. Additionally, the
'minor' parameter to kvm_psci_1_x_call() is a constant known at compile
time for all callsites.
Though it is benign, the additional check against the
PSCI kvm_psci_1_x_call() is unnecessary and likely to be missed the next
time KVM raises its maximum PSCI version. Drop the check altogether and
rely on sanitization when the PSCI version is set by userspace.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220322183538.2757758-4-oupton@google.com
|
|
The SMCCC does not allow the SMC64 calling convention to be used from
AArch32. While KVM checks to see if the calling convention is allowed in
PSCI_1_0_FN_PSCI_FEATURES, it does not actually prevent calls to
unadvertised PSCI v1.0+ functions.
Hoist the check to see if the requested function is allowed into
kvm_psci_call(), thereby preventing SMC64 calls from AArch32 for all
PSCI versions.
Fixes: d43583b890e7 ("KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest")
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220322183538.2757758-3-oupton@google.com
|
|
The only valid calling SMC calling convention from an AArch32 state is
SMC32. Disallow any PSCI function that sets the SMC64 function ID bit
when called from AArch32 rather than comparing against known SMC64 PSCI
functions.
Note that without this change KVM advertises the SMC64 flavor of
SYSTEM_RESET2 to AArch32 guests.
Fixes: d43583b890e7 ("KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest")
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220322183538.2757758-2-oupton@google.com
|
|
The module owner = THIS_MODULE is set by I2C core, drop duplicate assignment.
Fixes: 8dde6f7452a1 ("drm: bridge: icn6211: Add I2C configuration support")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220401113317.7033-1-marex@denx.de
|
|
Add description of debugfs files alloc_traces and free_traces
to SLUB cache documentation.
[ vbabka@suse.cz: some rewording ]
Signed-off-by: Oliver Glitta <glittao@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
|
|
Sort the output of debugfs alloc_traces and free_traces by the frequency
of allocation/freeing stack traces. Most frequently used stack traces
will be printed first, e.g. for easier memory leak debugging.
Signed-off-by: Oliver Glitta <glittao@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
|
|
Aggregate objects in slub cache by unique stack trace in addition to
caller address when producing contents of debugfs files alloc_traces and
free_traces in debugfs. Also add the stack traces to the debugfs output.
This makes it much more useful to e.g. debug memory leaks.
Signed-off-by: Oliver Glitta <glittao@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
|
|
Many stack traces are similar so there are many similar arrays.
Stackdepot saves each unique stack only once.
Replace field addrs in struct track with depot_stack_handle_t handle. Use
stackdepot to save stack trace.
The benefits are smaller memory overhead and possibility to aggregate
per-cache statistics in the following patch using the stackdepot handle
instead of matching stacks manually.
[ vbabka@suse.cz: rebase to 5.17-rc1 and adjust accordingly ]
This was initially merged as commit 788691464c29 and reverted by commit
ae14c63a9f20 due to several issues, that should now be fixed.
The problem of unconditional memory overhead by stackdepot has been
addressed by commit 2dba5eb1c73b ("lib/stackdepot: allow optional init
and stack_table allocation by kvmalloc()"), so the dependency on
stackdepot will result in extra memory usage only when a slab cache
tracking is actually enabled, and not for all CONFIG_SLUB_DEBUG builds.
The build failures on some architectures were also addressed, and the
reported issue with xfs/433 test did not reproduce on 5.17-rc1 with this
patch.
Signed-off-by: Oliver Glitta <glittao@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
|
|
set_track() either zeroes out the struct track or fills it, depending on
the addr parameter. This is unnecessary as there's only one place that
calls it for the initialization - init_tracking(). We can simply do the
zeroing there, with a single memset() that covers both TRACK_ALLOC and
TRACK_FREE as they are adjacent.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
|
|
Without this patch, hw scan won't stay long enough on DFS/passive
channels. Found previous logic error and fix it.
Signed-off-by: Po Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220401055043.12512-5-pkshih@realtek.com
|
|
Turn off coexistence driver control, let firmware can control the
traffic during scan. This prevents potential unexpected behavior of
the BT driver.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220401055043.12512-4-pkshih@realtek.com
|
|
Add a dummy function for packet offload to eliminate warning message
"c2h class 1 func 2 not support". This c2h is for debug purpose and
its presence itself can do the work, so further parsing won't be
required for now.
Signed-off-by: Po Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220401055043.12512-3-pkshih@realtek.com
|
|
Previously we only consider single interface's status, idle mode
behavior could be unexpected when multiple interfaces is active.
Change to enter/leave idle mode by mac80211's configuration state.
Signed-off-by: Po Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220401055043.12512-2-pkshih@realtek.com
|
|
In a later patch we want to add stackdepot support for object owner
tracking in slub caches, which is enabled by slub_debug boot parameter.
This creates a bootstrap problem as some caches are created early in
boot when slab_is_available() is false and thus stack_depot_init()
tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are
already beyond memblock_free_all(). Ideally memblock allocation should
fail, yet it succeeds, but later the system crashes, which is a
separately handled issue.
To resolve this boostrap issue in a robust way, this patch adds another
way to request stack_depot_early_init(), which happens at a well-defined
point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT,
code that's e.g. processing boot parameters (which happens early enough)
can call a new function stack_depot_want_early_init(), which sets a flag
that stack_depot_early_init() will check.
In this patch we also convert page_owner to this approach. While it
doesn't have the bootstrap issue as slub, it's also a functionality
enabled by a boot param and can thus request stack_depot_early_init()
with memblock allocation instead of later initialization with
kvmalloc().
As suggested by Mike, make stack_depot_early_init() only attempt
memblock allocation and stack_depot_init() only attempt kvmalloc().
Also change the latter to kvcalloc(). In both cases we can lose the
explicit array zeroing, which the allocations do already.
As suggested by Marco, provide empty implementations of the init
functions for !CONFIG_STACKDEPOT builds to simplify the callers.
[1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
|
|
ptcl_init, standing for protocol initialization, is updated to the latest
version.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220325060055.58482-17-pkshih@realtek.com
|
|
TMAC is short for TX MAC, and this patch is to configure FIFO thresholds.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220325060055.58482-16-pkshih@realtek.com
|
|
Configure NAV function and its parameters.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220325060055.58482-15-pkshih@realtek.com
|
|
Update IC specific settings accordingly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220325060055.58482-14-pkshih@realtek.com
|
|
The security setting of 8852A and 8852C are different, so change the
settings accordingly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220325060055.58482-13-pkshih@realtek.com
|
|
CMAC is Control MAC, and this patch is to turn on CR (control registers)
protection.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220325060055.58482-12-pkshih@realtek.com
|
|
The v1 chip use specific functions to enable and disable BB/RF.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220325060055.58482-11-pkshih@realtek.com
|
Brijesh Singh
Heiko Carstens
Michael Roth
Maxime Ripard
Masahiro Yamada
Necip Fazil Yildiran
Joey Gouly
Tom Lendacky
Ashutosh Dixit
Andy Shevchenko
Yu Zhe
Oliver Upton
Marek Vasut
Oliver Glitta
Vlastimil Babka
Po Hao Huang
Ching-Te Ku
Ping-Ke Shih