aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-04-04regulator: Flag uncontrollable regulators as always_onMark Brown1-0/+18
While we currently assume that regulators with no control available are just uncontionally enabled this isn't always as clearly displayed to users as is desirable, for example the code for disabling unused regulators will log that it is about to disable them. Clean this up a bit by setting always_on during constraint evaluation if we have no available mechanism for controlling the regualtor so things that check the constraint will do the right thing. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220325144637.1543496-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04spi: support hclkLeilk Liu1-0/+4
this patch support hclk for AHB bus. Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220321013922.24067-3-leilk.liu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04spi: mediatek: support hclkLeilk Liu1-16/+69
this patch adds hclk support. Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220321013922.24067-4-leilk.liu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04spi: mediatek: add spi memory support for ipm designLeilk Liu1-1/+300
this patch add the support of spi-mem for ipm design. Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220321013922.24067-2-leilk.liu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04regulator: fixed: Remove print on allocation failureMark Brown1-4/+1
OOMs are very verbose, we don't need to print an additional error message when we fail to allocate. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220324201854.3107077-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04regulator: dt-bindings: richtek,rt4801: minor comments adjustmentsKrzysztof Kozlowski1-5/+2
Correct grammar in 'enable-gpios' description and remove useless comment about regulator nodes, because these are obvious from patternProperties. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220401153711.1057853-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04regulator: Add binding for Richtek RT5759 DCDC converterChiYuan Huang1-0/+90
Add bindings for Richtek RT5759 high-performance DCDC converter. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/1648294788-11758-2-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04regulator: rt5759: Add support for Richtek RT5759 DCDC converterChiYuan Huang3-0/+380
Add support for Richtek RT5759 high-performance DCDC converter. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1648294788-11758-3-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04spi: mxic: Fix an error handling path in mxic_spi_probe()Christophe JAILLET1-0/+1
If spi_register_master() fails, we must undo a previous mxic_spi_mem_ecc_probe() call, as already done in the remove function. Fixes: 00360ebae483 ("spi: mxic: Add support for pipelined ECC operations") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/09c81f751241f6ec0bac7a48d4ec814a742e0d17.1648980664.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04regulator: Add BUCK and LDO document for MT6358 and MT6366Johnson Wang1-5/+17
Add buck_vcore_sshub and ldo_vsram_others_sshub regulators to binding document for MT6358 and MT6366. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Johnson Wang <johnson.wang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220317030402.24894-3-johnson.wang@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04regulator: mt6366: Add support for MT6366 regulatorJohnson Wang2-5/+253
The MT6366 is a regulator found on boards based on MediaTek MT8186 and probably other SoCs. It is a so called pmic and connects as a slave to SoC using SPI, wrapped inside the pmic-wrapper. Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Johnson Wang <johnson.wang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220317030402.24894-2-johnson.wang@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04regmap: Constify static regmap_bus structsRikard Falkeborn6-8/+8
The only usage of these is to pass their address to __regmap_init() or __devm_regmap_init(), both which takes pointers to const struct regmap_bus. Make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20220330214110.36337-1-rikard.falkeborn@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: dt-bindings: mediatek: mt8195: support mt8195-mt6359-max98390-rt5682Trevor Wu1-0/+1
This patch adds compatible string "mediatek,mt8195-mt6359-max98390-rt5682" to support mt8195 board with mt6359, max98390 and rt5682. Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220324053851.27350-7-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: mediatek: mt8195: add machine support for max98390 and rt5682Trevor Wu2-0/+72
This patch adds support for mt8195 board with mt6359, max98390 and rt5682. Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Link: https://lore.kernel.org/r/20220324053851.27350-6-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: mediatek: mt8195: rename card controlsTrevor Wu1-13/+13
In order to be able to reuse the same configurations in user space, rename the controls to generic names. "Headphone Jack" -> "Headphone" "Speakers" -> "Ext Spk" "Left Speaker" -> "Left Spk" "Right Speaker" -> "Right SPk" Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220324053851.27350-5-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: dt-bindings: mediatek: mt8195: merge mt8195 machine yamlTrevor Wu2-54/+5
Because the same binding components can be shared by all codecs combinations, we only reserve one binding file for mt8195 machine driver and rename to a generic name. We use compatible string to separate different codec combination instead of creating a new binding file for new codec combination. Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220324053851.27350-4-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: mediatek: mt8195: merge machine driverTrevor Wu4-1274/+241
Because most functions can be reused in different codec combinations, mt8195 machine drivers are combined to one common file. The model and compatible string are used to decide which codecs are being used. As a result, We can prevent from copy-paste functions when new codec combination is introduced. Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220324053851.27350-3-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: mediatek: mt8195: revise mt8195-mt6359-rt1019-rt5682.cTrevor Wu1-248/+240
Revise driver for the coming driver combination. There are two major parts including in the patch. 1. Apply some suggested changes used in mt8195-mt6359-rt1011-rt5682.c. 2. Reorder the layout for centralizing the codec related code. Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220324053851.27350-2-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ARM: configs: Update multi_v5_defconfig for WM8731 bus refactoringMark Brown1-1/+2
The WM8731 driver has been refactored so the I2C and SPI bus code is separate modules. Refresh multi_v5_defconfig to reflect this. Signed-off-by: Mark Brown <broonie@kernel.org> Cc: soc@kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220325153121.1598494-8-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: wm8731: Convert DT bindings to YAML formatMark Brown2-27/+97
Convert the WM8731 DT bindings to YAML format, including addition of documentation for the regulator and clock bindings which the driver has had for some time but which were not covered in the bindings document. Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220325153121.1598494-7-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: wm8731: Factor out the I2C and SPI bus code into separate modulesMark Brown9-142/+183
Placing both the I2C and SPI code in the same module causes problems with mixes of modular and non-modular builds of the buses so it's generally bad practice. As with other drivers split the bus code out of the WM8731 driver into separate modules. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220325153121.1598494-6-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: wm8731: Factor our MCLK and mutex initialisationMark Brown1-30/+14
The code for initialising the MCLK and mutex is identical in the I2C and SPI probe functions so just move this out into wm8731_init(). Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220325153121.1598494-5-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: wm8731: Move regulator request into wm8731_init()Mark Brown1-32/+16
The supplies used by the wm8731 do not depend on the bus and there is no need to do anything with the supplies prior to instantiating the regmap so move the request into wm8731_init(). Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220325153121.1598494-4-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: wm8731: Factor component init out of bus codeMark Brown1-40/+27
Both the I2C and SPI bus code register the component immediately after they call wm8731_hw_init(), factor the code out into the the common function and rename it to just be plain wm8731_init() while we're at it since it's not just for hardware init any more. This refactoring means we need to move the function after the declaration of the component driver. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220325153121.1598494-3-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: wm8731: Update to modern DAI terminologyMark Brown1-4/+3
As part of retiring the old defines used to specify DAI formats update the wm8731 driver to use the modern names. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220325153121.1598494-2-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: topology: Rename soc_tplg_init_kcontrol() functionAmadeusz Sławiński1-10/+7
Other functions used for callbacks are named after function they call, however function calling control_load seems to be an exception. Rename it to soc_tplg_control_load(). Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220401120200.4047867-7-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: topology: Correct error messageAmadeusz Sławiński1-1/+1
Error message refers to mixer, but it is used for various other types of controls, so change it to refer to generic "controls". Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220401120200.4047867-6-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: topology: Rename SOC_TPLG_PASS_MIXER to _CONTROLAmadeusz Sławiński1-5/+5
Name of SOC_TPLG_PASS_MIXER pass is bit confusing, suggesting that it may only apply to mixers. As it is used for all control types, change name to SOC_TPLG_PASS_CONTROL. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220401120200.4047867-5-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: topology: Return bool instead of intAmadeusz Sławiński1-3/+3
In practice soc_tplg_is_eof() returns boolean value and caller uses the return value in such way, so convert the function to really do it. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220401120200.4047867-4-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: topology: Remove unnecessary loopingAmadeusz Sławiński1-218/+187
Functions creating kcontrols as written allow for creation of multiple kcontrols at the same time, but in practice they are called for each kcontrol individually. Remove unnecessary loop as code always loops once anyway. This reduces intendation level allowing for some code to be put on one line instead of multiple lines. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220401120200.4047867-3-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: topology: Use for loop instead of whileAmadeusz Sławiński1-8/+3
The 'while' loop can be replaced with a 'for' loop, making it more clear about what possible values there are, by having all of it in one place, instead of scattered around. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220401120200.4047867-2-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: tegra: AHUB routes for ASRC moduleSameer Pujar1-1/+81
Add AHUB routes for ASRC module. The ASRC module can be plugged into audio path as per the need. The routing controls can be used to setup the audio path with ASRC similar to the already existing routes. The routes are added to Tegra186 and later Tegra SoCs where ASRC module is present. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1648735412-32220-4-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: tegra: Add Tegra186 based ASRC driverSameer Pujar4-0/+1172
Asynchronous Sample Rate Converter (ASRC) converts the sampling frequency of the input signal from one frequency to another. It can handle over a wide range of sample rate ratios (freq_in/freq_out) from 1:24 to 24:1. ASRC has two modes of operation. One where ratio can be programmed in SW and the other where it gets the information from ratio estimator module. The latter mode above can help address the cases where the sample rate is not known at the stream set up time or is potentially time varying. In addition, the ratio between input and output sample rate can be any arbitrary number and the input and output clocks could be derived from asynchronous clocks. This patch registers ASRC driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ASRC interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1648735412-32220-3-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: tegra: Add binding doc for ASRC moduleSameer Pujar2-0/+85
This patch adds YAML schema for DT bindings of Asynchronous Sample Rate Converter (ASRC) module. It will be registered as an ASoC component and can be plugged into an audio path as per need via ALSA mixer controls. The bindings are applicable on Tegra186 and later where the ASRC device is present. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1648735412-32220-2-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: SOF: Remove redundant return statementstangmeng1-4/+1
After the free PCM action is executed, no matter what the return result is, it will return directly in sof_pcm_trigger. So the return statement here is redundant. Signed-off-by: tangmeng <tangmeng@uniontech.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220330201926.1330402-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: SOF: Remove header from struct snd_sof_ipc_msgPeter Ujfalusi1-1/+0
The header field is no longer used by the underlying code and can be dropped from the snd_sof_ipc_msg struct. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220330201926.1330402-11-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: SOF: Drop 'header' parameter from tx_message() APIPeter Ujfalusi11-59/+39
The header parameter is not used anymore and now it can be dropped from the parameter list of tx_message(). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220330201926.1330402-10-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: SOF: ipc: Use msg->reply_data directly in snd_sof_ipc_get_reply()Peter Ujfalusi1-14/+16
Instead of using a local reply to first read out the header from the mailbox then memcpy it or read it again to msg->reply_data, read it directly to it's final place from the start. If we received an error we do not need to do a memcpy anymore. If the reply is reporting a success then we don not need to read the reply again from the mailbox if the reply_size equals to the already read header size. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220330201926.1330402-9-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: SOF: disable dma trace in s0ixLibin Yang1-2/+10
When system enters s0ix, the dma trace won't be used. Otherwise, the DMA will access the host memory, which will prevent entering S0ix. Driver has notified firmware not to send message through dma trace. Let's also trigger stop dma trace in driver side. Signed-off-by: Libin Yang <libin.yang@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220330201926.1330402-8-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: SOF: extend the interface to stop DMA traceLibin Yang3-21/+51
Change the interface to stop the DMA trace for suspend. Replace the snd_sof_init_trace_ipc() and snd_sof_release_trace() calls with more explicit interface for PM (the sole user for this interface). The new snd_sof_trace_suspend() call takes the target PM state as argument, allowing the trace implementation to decide how to handle the transition. Use this information to release DMA resources only if DSP is suspended and will not remain in D0. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Libin Yang <libin.yang@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220330201926.1330402-7-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: SOF: Drop support for mapped control dataPeter Ujfalusi3-26/+0
Access through mmapped memory is not supported and it is explicitly disabled with scontrol->readback_offset = 0; when a control is created. Remove the dead code and the confusion around this feature. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220330201926.1330402-6-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: SOF: ipc: Use ipc->max_payload_size for message/reply size checkingPeter Ujfalusi1-2/+2
Use the ipc->max_payload_size for validating that the message or reply size can be supported. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220330201926.1330402-5-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: SOF: ipc: Add max_payload_size field in struct snd_sof_ipcPeter Ujfalusi2-0/+5
The max_payload_size is an IPC level constraint. Add a new field, max_payload_size to struct snd_sof_ipc and set it during IPC init. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220330201926.1330402-4-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: SOF: Remove dmab and dmab_bdl from snd_sof_dev structPeter Ujfalusi1-2/+0
The dmab and dmab_bdl is not used by any platform, it can be removed from struct snd_sof_dev. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220330201926.1330402-3-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04ASoC: SOF: Intel: hda-loader: Use local snd_dma_bufferPeter Ujfalusi1-5/+7
There is no reason to use the sdev->dmab and sdev->dmab_bdl as the buffers are only used locally: allocated used and freed in the same function. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220330201926.1330402-2-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04spi: rpc-if: Fix RPM imbalance in probe error pathGeert Uytterhoeven1-2/+6
If rpcif_hw_init() fails, Runtime PM is left enabled. Fixes: b04cc0d912eb80d3 ("memory: renesas-rpc-if: Add support for RZ/G2L") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/1c78a1f447d019bb66b6e7787f520ae78821e2ae.1648562287.git.geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04regulator: rtq2134: Fix missing active_discharge_on settingAxel Lin1-0/+1
The active_discharge_on setting was missed, so output discharge resistor is always disabled. Fix it. Fixes: 0555d41497de ("regulator: rtq2134: Add support for Richtek RTQ2134 SubPMIC") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20220404022514.449231-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04regulator: wm8994: Add an off-on delay for WM8994 variantJonathan Bakker1-3/+39
As per Table 130 of the wm8994 datasheet at [1], there is an off-on delay for LDO1 and LDO2. In the wm8958 datasheet [2], I could not find any reference to it. I could not find a wm1811 datasheet to double-check there, but as no one has complained presumably it works without it. This solves the issue on Samsung Aries boards with a wm8994 where register writes fail when the device is powered off and back-on quickly. [1] https://statics.cirrus.com/pubs/proDatasheet/WM8994_Rev4.6.pdf [2] https://statics.cirrus.com/pubs/proDatasheet/WM8958_v3.5.pdf Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/CY4PR04MB056771CFB80DC447C30D5A31CB1D9@CY4PR04MB0567.namprd04.prod.outlook.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04gpu: ipu-v3: Fix dev_dbg frequency outputLeo Ruan1-2/+3
This commit corrects the printing of the IPU clock error percentage if it is between -0.1% to -0.9%. For example, if the pixel clock requested is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%. But the fixed point math had a flaw and calculated error of 0.2%. Before: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error 0.2% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz After: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error -0.8% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz Signed-off-by: Leo Ruan <tingquan.ruan@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220207151411.5009-1-mark.jonas@de.bosch.com
2022-04-04drm/imx: dw_hdmi-imx: Fix bailout in error cases of probeLiu Ying1-1/+7
In dw_hdmi_imx_probe(), if error happens after dw_hdmi_probe() returns successfully, dw_hdmi_remove() should be called where necessary as bailout. Fixes: c805ec7eb210 ("drm/imx: dw_hdmi-imx: move initialization into probe") Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220128091944.3831256-1-victor.liu@nxp.com
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.