| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch turns the new SHA driver into a tristate and also allows
compile testing.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Zaibo moved projects and is not looking into crypto stuff.
I am responsible for checking the patches of these modules.
so the maintainers list needs to be updated.
I take care of HPRE, Qian Weili take care of TRNG,
Ye Kai and me take care of SEC2.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Kai Ye <yekai12@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix the following W=1 kernel warnings:
crypto/dh.c:311:31: warning: unused function 'dh_safe_prime_dh_alg'
[-Wunused-function]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The corresponding API for clk_prepare_enable is clk_disable_unprepare,
other than clk_disable_unprepare.
Fix this by changing clk_disable to clk_disable_unprepare.
Fixes: beca35d05cc2 ("hwrng: nomadik - use clk_prepare_enable()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The generate function in struct rng_alg expects that the destination
buffer is completely filled if the function returns 0. qcom_rng_read()
can run into a situation where the buffer is partially filled with
randomness and the remaining part of the buffer is zeroed since
qcom_rng_generate() doesn't check the return value. This issue can
be reproduced by running the following from libkcapi:
kcapi-rng -b 9000000 > OUTFILE
The generated OUTFILE will have three huge sections that contain all
zeros, and this is caused by the code where the test
'val & PRNG_STATUS_DATA_AVAIL' fails.
Let's fix this issue by ensuring that qcom_rng_read() always returns
with a full buffer if the function returns success. Let's also have
qcom_rng_generate() return the correct value.
Here's some statistics from the ent project
(https://www.fourmilab.ch/random/) that shows information about the
quality of the generated numbers:
$ ent -c qcom-random-before
Value Char Occurrences Fraction
0 606748 0.067416
1 33104 0.003678
2 33001 0.003667
...
253 � 32883 0.003654
254 � 33035 0.003671
255 � 33239 0.003693
Total: 9000000 1.000000
Entropy = 7.811590 bits per byte.
Optimum compression would reduce the size
of this 9000000 byte file by 2 percent.
Chi square distribution for 9000000 samples is 9329962.81, and
randomly would exceed this value less than 0.01 percent of the
times.
Arithmetic mean value of data bytes is 119.3731 (127.5 = random).
Monte Carlo value for Pi is 3.197293333 (error 1.77 percent).
Serial correlation coefficient is 0.159130 (totally uncorrelated =
0.0).
Without this patch, the results of the chi-square test is 0.01%, and
the numbers are certainly not random according to ent's project page.
The results improve with this patch:
$ ent -c qcom-random-after
Value Char Occurrences Fraction
0 35432 0.003937
1 35127 0.003903
2 35424 0.003936
...
253 � 35201 0.003911
254 � 34835 0.003871
255 � 35368 0.003930
Total: 9000000 1.000000
Entropy = 7.999979 bits per byte.
Optimum compression would reduce the size
of this 9000000 byte file by 0 percent.
Chi square distribution for 9000000 samples is 258.77, and randomly
would exceed this value 42.24 percent of the times.
Arithmetic mean value of data bytes is 127.5006 (127.5 = random).
Monte Carlo value for Pi is 3.141277333 (error 0.01 percent).
Serial correlation coefficient is 0.000468 (totally uncorrelated =
0.0).
This change was tested on a Nexus 5 phone (msm8974 SoC).
Signed-off-by: Brian Masney <bmasney@redhat.com>
Fixes: ceec5f5b5988 ("crypto: qcom-rng - Add Qcom prng driver")
Cc: stable@vger.kernel.org # 4.19+
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
|
|
commit f86c3ed55920 ("drm/mgag200: Split PLL setup into compute and
update functions") introduced a regression for g200wb and g200ew.
The PLLs are not set up properly, and VGA screen stays
black, or displays "out of range" message.
MGA1064_WB_PIX_PLLC_N/M/P was mistakenly replaced with
MGA1064_PIX_PLLC_N/M/P which have different addresses.
Patch tested on a Dell T310 with g200wb
Fixes: f86c3ed55920 ("drm/mgag200: Split PLL setup into compute and update functions")
Cc: stable@vger.kernel.org
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308174321.225606-1-jfalempe@redhat.com
|
|
Pull x86 fixes from Borislav Petkov:
- Free shmem backing storage for SGX enclave pages when those are
swapped back into EPC memory
- Prevent do_int3() from being kprobed, to avoid recursion
- Remap setup_data and setup_indirect structures properly when
accessing their members
- Correct the alternatives patching order for modules too
* tag 'x86_urgent_for_v5.17_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Free backing memory after faulting the enclave page
x86/traps: Mark do_int3() NOKPROBE_SYMBOL
x86/boot: Add setup_indirect support in early_memremap_is_setup_data()
x86/boot: Fix memremap of setup_indirect structures
x86/module: Fix the paravirt vs alternative order
|
|
It is not in general safe to wait for XPRT_LOCKED to clear.
A wakeup is only sent when
- connection completes
- sock close completes
so during normal operations, this can wait indefinitely.
The event we need to protect against is ->inet being set to NULL, and
that happens under the recv_mutex lock.
So drop the handlign of XPRT_LOCKED and use recv_mutex instead.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The commit handling code is not safe against memory-pressure deadlocks
when writing to swap. In particular, nfs_commitdata_alloc() blocks
indefinitely waiting for memory, and this can consume all available
workqueue threads.
swap-out most likely uses STABLE writes anyway as COND_STABLE indicates
that a stable write should be used if the write fits in a single
request, and it normally does. However if we ever swap with a small
wsize, or gather unusually large numbers of pages for a single write,
this might change.
For safety, make it explicit in the code that direct writes used for swap
must always use FLUSH_STABLE.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
1/ Taking the i_rwsem for swap IO triggers lockdep warnings regarding
possible deadlocks with "fs_reclaim". These deadlocks could, I believe,
eventuate if a buffered read on the swapfile was attempted.
We don't need coherence with the page cache for a swap file, and
buffered writes are forbidden anyway. There is no other need for
i_rwsem during direct IO. So never take it for swap_rw()
2/ generic_write_checks() explicitly forbids writes to swap, and
performs checks that are not needed for swap. So bypass it
for swap_rw().
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
If we are swapping over NFSv4, we may not be able to allocate memory to
start the state-manager thread at the time when we need it.
So keep it always running when swap is enabled, and just signal it to
start.
This requires updating and testing the cl_swapper count on the root
rpc_clnt after following all ->cl_parent links.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
rpc tasks can be marked as RPC_TASK_SWAPPER. This causes GFP_MEMALLOC
to be used for some allocations. This is needed in some cases, but not
in all where it is currently provided, and in some where it isn't
provided.
Currently *all* tasks associated with a rpc_client on which swap is
enabled get the flag and hence some GFP_MEMALLOC support.
GFP_MEMALLOC is provided for ->buf_alloc() but only swap-writes need it.
However xdr_alloc_bvec does not get GFP_MEMALLOC - though it often does
need it.
xdr_alloc_bvec is called while the XPRT_LOCK is held. If this blocks,
then it blocks all other queued tasks. So this allocation needs
GFP_MEMALLOC for *all* requests, not just writes, when the xprt is used
for any swap writes.
Similarly, if the transport is not connected, that will block all
requests including swap writes, so memory allocations should get
GFP_MEMALLOC if swap writes are possible.
So with this patch:
1/ we ONLY set RPC_TASK_SWAPPER for swap writes.
2/ __rpc_execute() sets PF_MEMALLOC while handling any task
with RPC_TASK_SWAPPER set, or when handling any task that
holds the XPRT_LOCKED lock on an xprt used for swap.
This removes the need for the RPC_IS_SWAPPER() test
in ->buf_alloc handlers.
3/ xprt_prepare_transmit() sets PF_MEMALLOC after locking
any task to a swapper xprt. __rpc_execute() will clear it.
3/ PF_MEMALLOC is set for all the connect workers.
Reviewed-by: Chuck Lever <chuck.lever@oracle.com> (for xprtrdma parts)
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
NFS_RPC_SWAPFLAGS is only used for READ requests.
It sets RPC_TASK_SWAPPER which gives some memory-allocation priority to
requests. This is not needed for swap READ - though it is for writes
where it is set via a different mechanism.
RPC_TASK_ROOTCREDS causes the 'machine' credential to be used.
This is not needed as the root credential is saved when the swap file is
opened, and this is used for all IO.
So NFS_RPC_SWAPFLAGS isn't needed, and as it is the only user of
RPC_TASK_ROOTCREDS, that isn't needed either.
Remove both.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Currently, tasks marked as "swapper" tasks get put to the front of
non-priority rpc_queues, and are sorted earlier than non-swapper tasks on
the transport's ->xmit_queue.
This is pointless as currently *all* tasks for a mount that has swap
enabled on *any* file are marked as "swapper" tasks. So the net result
is that the non-priority rpc_queues are reverse-ordered (LIFO).
This scheduling boost is not necessary to avoid deadlocks, and hurts
fairness, so remove it. If there were a need to expedite some requests,
the tk_priority mechanism is a more appropriate tool.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
When memory is short, new worker threads cannot be created and we depend
on the minimum one rpciod thread to be able to handle everything. So it
must not block waiting for memory.
xprt_dynamic_alloc_slot can block indefinitely. This can tie up all
workqueue threads and NFS can deadlock. So when called from a
workqueue, set __GFP_NORETRY.
The rdma alloc_slot already does not block. However it sets the error
to -EAGAIN suggesting this will trigger a sleep. It does not. As we
can see in call_reserveresult(), only -ENOMEM causes a sleep. -EAGAIN
causes immediate retry.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
When memory is short, new worker threads cannot be created and we depend
on the minimum one rpciod thread to be able to handle everything. So it
must not block waiting for memory.
mempools are particularly a problem as memory can only be released back
to the mempool by an async rpc task running. If all available workqueue
threads are waiting on the mempool, no thread is available to return
anything.
lookup_cred() can block on a mempool or kmalloc - and this can cause
deadlocks. So add a new RPCAUTH_LOOKUP flag for async lookups and don't
block on memory. If the -ENOMEM gets back to call_refreshresult(), wait
a short while and try again. HZ>>4 is chosen as it is used elsewhere
for -ENOMEM retries.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
When memory is short, new worker threads cannot be created and we depend
on the minimum one rpciod thread to be able to handle everything.
So it must not block waiting for memory.
mempools are particularly a problem as memory can only be released back
to the mempool by an async rpc task running. If all available
workqueue threads are waiting on the mempool, no thread is available to
return anything.
rpc_malloc() can block, and this might cause deadlocks.
So check RPC_IS_ASYNC(), rather than RPC_IS_SWAPPER() to determine if
blocking is acceptable.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
This code is pointless as IS_SWAPFILE is always defined.
So remove it.
Suggested-by: Mark Hemment <markhemm@googlemail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The fscache cookie APIs including fscache_acquire_cookie() and
fscache_relinquish_cookie() now have very good tracing. Thus,
there is no real need for dfprintks in the NFS fscache interface.
The NFS fscache interface has removed all dfprintks so remove the
NFSDBG_FSCACHE defines.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Most of fscache and other NFS IO paths are now using tracepoints.
Remove the dfprintks in the NFS fscache read/write page functions
and replace with tracepoints at the begin and end of the functions.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Rename NFS fscache functions in a more consistent fashion
to better reflect when we read from and write to fscache.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
A number of places in the fscache interface used nfs_inode when inode could
be used, simplifying the code.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
In the presence of trunking transports, it's helpful to make sure
that during the migration event, the GETATTR for fs_location attribute
happens on the main transport.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
[You don't often get email from khoroshilov@ispras.ru. Learn why this is important at http://aka.ms/LearnAboutSenderIdentification.]
Overflow check in not needed anymore after we switch to kmalloc_array().
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: a4f743a6bb20 ("NFSv4.1: Convert open-coded array allocation calls to kmalloc_array()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Allow the user space application to create and release an rpmsg device
by adding RPMSG_CREATE_DEV_IOCTL and RPMSG_RELEASE_DEV_IOCTL ioctrls to
the /dev/rpmsg_ctrl interface
The RPMSG_CREATE_DEV_IOCTL Ioctl can be used to instantiate a local rpmsg
device.
Depending on the back-end implementation, the associated rpmsg driver is
probed and a NS announcement can be sent to the remote processor.
The RPMSG_RELEASE_DEV_IOCTL allows the user application to release a
rpmsg device created either by the remote processor or with the
RPMSG_CREATE_DEV_IOCTL call.
Depending on the back-end implementation, the associated rpmsg driver is
removed and a NS destroy rpmsg can be sent to the remote processor.
Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-12-arnaud.pouliquen@foss.st.com
|
|
For the rpmsg virtio backend, the current implementation of the rpmsg char
only allows to instantiate static(i.e. prefixed source and destination
addresses) end points, and only on the Linux user space initiative.
This patch defines the "rpmsg-raw" channel and registers it to the rpmsg bus.
This registration allows:
- To create the channel at the initiative of the remote processor
relying on the name service announcement mechanism. In other words the
/dev/rpmsgX interface is instantiate by the remote processor.
- To use the channel object instead of the endpoint, thus preventing the
user space from having the knowledge of the remote processor's
endpoint addresses.
- To rely on udev to be inform when a /dev/rpmsgX is created on remote
processor request, indicating that the remote processor is ready to
communicate.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-11-arnaud.pouliquen@foss.st.com
|
|
Current implementation create/destroy a new endpoint on each
rpmsg_eptdev_open/rpmsg_eptdev_release calls.
For a rpmsg device created by the NS announcement a default endpoint is created.
In this case we have to reuse the default rpmsg device endpoint associated to
the channel instead of creating a new one.
This patch prepares the introduction of a rpmsg channel device for the
char device. The rpmsg channel device will require a default endpoint to
communicate to the remote processor.
Add the default_ept field in rpmsg_eptdev structure.This pointer
determines the behavior on rpmsg_eptdev_open and rpmsg_eptdev_release call.
- If default_ept == NULL:
Use the legacy behavior by creating a new endpoint each time
rpmsg_eptdev_open is called and release it when rpmsg_eptdev_release
is called on /dev/rpmsgX device open/close.
- If default_ept is set:
use the rpmsg device default endpoint for the communication.
Add protection in rpmsg_eptdev_ioctl to prevent to destroy a default endpoint.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-10-arnaud.pouliquen@foss.st.com
|
|
Introduce the rpmsg_chrdev_eptdev_alloc and rpmsg_chrdev_eptdev_add
internal function to split the allocation part from the device add.
This patch prepares the introduction of a rpmsg channel device for the
char device. An default endpoint will be created,
referenced in the rpmsg_eptdev structure before adding the devices.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-9-arnaud.pouliquen@foss.st.com
|
|
The rpmsg_chrdev driver has been replaced by the rpmsg_ctrl driver
for the /dev/rpmsg_ctrlX devices management. The reference for the
driver override is now the rpmsg_ctrl.
Update the rpmsg_chrdev_register_device function to reflect the update,
and rename the function to use the rpmsg_ctrldev prefix.
The platform drivers are updated accordingly.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-8-arnaud.pouliquen@foss.st.com
|
|
Create the rpmsg_ctrl.c module and move the code related to the
rpmsg_ctrldev device in this new module.
Add the dependency between rpmsg_char and rpmsg_ctrl in the
kconfig file:
1) RPMSG_CTRL can set as module or built-in if
RPMSG=y || RPMSG_CHAR=y || RPMSG_CHAR=n
2) RPMSG_CTRL can not be set as built-in if
RPMSG=m || RPMSG_CHAR=m
Note that RPMGH_CHAR and RPMSG_CTRL can be activated separately.
Therefore, the RPMSG_CTRL configuration must be set for backwards compatibility.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-4-arnaud.pouliquen@foss.st.com
|
|
Migrate the creation of the rpmsg class from the rpmsg_char
to the core that the class is usable by the rpmsg_char and
the future rpmsg_ctrl module.
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-3-arnaud.pouliquen@foss.st.com
|
|
To prepare the split of the code related to the control (ctrldev)
and the endpoint (eptdev) devices in 2 separate files:
- Rename and export the functions in rpmsg_char.h.
- Suppress the dependency with the rpmsg_ctrldev struct in the
rpmsg_eptdev_create function.
Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-2-arnaud.pouliquen@foss.st.com
|
|
rpmsg_trysend() returns -ENOMEM when no rpmsg buffer can be allocated.
this causes write to fail with this error as opposed to -EAGAIN.
this is what user space applications (and libraries like boost.asio)
would expect when using normal character devices.
Signed-off-by: Tim Blechmann <tim@klingt.org>
Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220313024541.1579848-2-tim@klingt.org
|
|
linux-can-next-for-5.18-20220313
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-03-13
this is a pull request of 13 patches for net-next/master.
The 1st patch is by me and fixes the freeing of a skb in the vxcan
driver (initially added in this net-next window).
The remaining 12 patches are also by me and target the mcp251xfd
driver. The first patch fixes a printf modifier (initially added in
this net-next window). The remaining patches add ethtool based ring
and RX/TX IRQ coalescing support to the driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch increases the number of RX-FIFOs to 3 and the max TX-FIFO
depth to 16. This leads to the following default ring configuration.
CAN-2.0 mode:
| FIFO setup: TEF: 0x400: 8*12 bytes = 96 bytes
| FIFO setup: RX-0: FIFO 1/0x460: 32*20 bytes = 640 bytes
| FIFO setup: RX-1: FIFO 2/0x6e0: 32*20 bytes = 640 bytes
| FIFO setup: RX-2: FIFO 3/0x960: 16*20 bytes = 320 bytes
| FIFO setup: TX: FIFO 4/0xaa0: 8*16 bytes = 128 bytes
| FIFO setup: free: 224 bytes
CAN-FD mode:
| FIFO setup: TEF: 0x400: 4*12 bytes = 48 bytes
| FIFO setup: RX-0: FIFO 1/0x430: 16*76 bytes = 1216 bytes
| FIFO setup: RX-1: FIFO 2/0x8f0: 4*76 bytes = 304 bytes
| FIFO setup: TX: FIFO 3/0xa20: 4*72 bytes = 288 bytes
| FIFO setup: free: 192 bytes
With the previously added ethtool ring configuration support the RAM
on the chip can now be runtime configured between RX and TX buffers.
Link: https://lore.kernel.org/20220313083640.501791-13-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch adds support ethtool based configuration for the TX IRQ
coalescing added in the previous patch.
Link: https://lore.kernel.org/20220313083640.501791-12-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch adds TX IRQ coalescing support to the driver.
The implemented algorithm is similar to the RX IRQ coalescing support
added in the previous patch.
Link: https://lore.kernel.org/20220313083640.501791-11-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch adds support ethtool based configuration for the RX IRQ
coalescing added in the previous patch.
Link: https://lore.kernel.org/20220313083640.501791-10-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch adds RX IRQ coalescing support to the driver.
The mcp251xfd chip doesn't support proper hardware based coalescing,
so this patch tries to implemented it in software. The RX-FIFO offers
a "FIFO not empty" interrupt, which is used if no coalescing is
active.
With activated RX IRQ coalescing the "FIFO not empty" interrupt is
disabled in the RX IRQ handler and the "FIFO half full" or "FIFO full
interrupt" (depending on RX max coalesced frames IRQ) is used instead.
To avoid RX CAN frame starvation a hrtimer is setup with RX coalesce
usecs IRQ,on timer expiration the "FIFO not empty" is enabled again.
Support for ethtool configuration is added in the next patch.
Link: https://lore.kernel.org/20220313083640.501791-9-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch adds runtime configurable RX and TX ring parameters via
ethtool to the driver.
Link: https://lore.kernel.org/20220313083640.501791-8-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
So far the configuration of the hardware FIFOs is hard coded and
depend only on the selected CAN mode (CAN-2.0 or CAN-FD).
This patch updates the macros describing the ring, FIFO and RAM layout
to prepare for the next patches that add support for runtime
configurable ring parameters via ethtool.
Link: https://lore.kernel.org/20220313083640.501791-7-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch prepares the driver for runtime configurable RX and TX ring
parameters. The actual runtime config support will be added in the
next patch.
Link: https://lore.kernel.org/20220313083640.501791-6-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch adds basic ethtool support (to query the current and
maximum ring parameters) to the driver.
Link: https://lore.kernel.org/20220313083640.501791-5-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch adds support for coalescing to the RAM layout calculation.
Link: https://lore.kernel.org/20220313083640.501791-4-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch adds a helper function to calculate the ring configuration
of the controller based on various constraints, like available RAM,
size of RX and TX objects, CAN-mode, number of FIFOs and FIFO depth.
Link: https://lore.kernel.org/20220313083640.501791-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In case of an erroneous ring configuration more RAM than available
might be used. Change the printf modifier to a signed int to properly
print this erroneous value.
Fixes: 83daa863f16b ("can: mcp251xfd: ring: update FIFO setup debug info")
Link: https://lore.kernel.org/20220313083640.501791-2-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch fixes the freeing of the "oskb", by using kfree_skb()
instead of kfree().
Fixes: 1574481bb3de ("vxcan: remove sk reference in peer skb")
Link: https://lore.kernel.org/all/20220311123741.382618-1-mkl@pengutronix.de
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
As we change the C language standard for the kernel from gnu89 to
gnu11, it makes sense to also update the version for user space
compilation.
Some users have older native compilers than what they use for
kernel builds, so I considered using gnu99 as the default version
for wider compatibility with gcc-4.6 and earlier.
However, testing with older compilers showed that we already require
HOSTCC version 5.1 as well because a lot of host tools include
linux/compiler.h that uses __has_attribute():
CC tools/objtool/exec-cmd.o
In file included from tools/include/linux/compiler_types.h:36:0,
from tools/include/linux/compiler.h:5,
from exec-cmd.c:2:
tools/include/linux/compiler-gcc.h:19:5: error: "__has_attribute" is not defined [-Werror=undef]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
During a patch discussion, Linus brought up the option of changing
the C standard version from gnu89 to gnu99, which allows using variable
declaration inside of a for() loop. While the C99, C11 and later standards
introduce many other features, most of these are already available in
gnu89 as GNU extensions as well.
An earlier attempt to do this when gcc-5 started defaulting to
-std=gnu11 failed because at the time that caused warnings about
designated initializers with older compilers. Now that gcc-5.1 is
the minimum compiler version used for building kernels, that is no
longer a concern. Similarly, the behavior of 'inline' functions changes
between gnu89 using gnu_inline behavior and gnu11 using standard c99+
behavior, but this was taken care of by defining 'inline' to include
__attribute__((gnu_inline)) in order to allow building with clang a
while ago.
Nathan Chancellor reported a new -Wdeclaration-after-statement
warning that appears in a system header on arm, this still needs a
workaround.
The differences between gnu99, gnu11, gnu1x and gnu17 are fairly
minimal and mainly impact warnings at the -Wpedantic level that the
kernel never enables. Between these, gnu11 is the newest version
that is supported by all supported compiler versions, though it is
only the default on gcc-5, while all other supported versions of
gcc or clang default to gnu1x/gnu17.
Link: https://lore.kernel.org/lkml/CAHk-=wiyCH7xeHcmiFJ-YgXUy2Jaj7pnkdKpcovt8fYbVFW3TA@mail.gmail.com/
Link: https://github.com/ClangBuiltLinux/linux/issues/1603
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: David Sterba <dsterba@suse.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
Herbert Xu
Longfang Liu
Jiapeng Chong
Miaoqian Lin
Brian Masney
Linus Torvalds
Jocelyn Falempe
NeilBrown
Dave Wysochanski
Olga Kornievskaia
Alexey Khoroshilov
Arnaud Pouliquen
Tim Blechmann
David S. Miller
Marc Kleine-Budde
Arnd Bergmann