| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Document RZ/V2L (R9A07G054) SoC bindings. USBHS block is identical to one
found on RZ/A2 SoC. No driver changes are required as generic compatible
string "renesas,rza2-usbhs" will be used as a fallback.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220227231531.32279-1-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Add device tree binding document for RZ/V2L USBPHY Control Device.
RZ/V2L USBPHY Control Device is identical to one found on the RZ/G2L SoC.
No driver changes are required as generic compatible string
"renesas,rzg2l-usbphy-ctrl" will be used as a fallback.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220227230302.30388-1-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Document the General Timer Module(a.k.a OSTM) found on the RZ/V2L SoC.
OSTM module is identical to one found RZ/G2L SoC. No driver changes are
required as generic compatible string "renesas,ostm" will be used as a
fallback.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220227224845.27348-1-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Document RZ/V2L I2C bindings. RZ/V2L I2C is identical to one found on
the RZ/G2L SoC. No driver changes are required as RZ/G2L compatible
string "renesas,riic-rz" will be used as a fallback.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220227214747.24819-1-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Use the i2c_mark_adapter_suspended/resumed() i2c-core helpers and rely
on the i2c-core's suspended checking instead of using DIY code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Lock the adapter while setting the suspended flag, to ensure that other
locked code always sees the change immediately, rather then possibly using
a stale value.
This involves splitting the suspend/resume callbacks into separate runtime
and normal suspend/resume calls. This is necessary because i2c_dw_xfer()
will get called by the i2c-core with the adapter locked and it in turn
calls the runtime-resume callback through pm_runtime_get_sync().
So the runtime versions of the suspend/resume callbacks cannot take
the adapter-lock. Note this patch simply makes the runtime suspend/resume
callbacks not deal with the suspended flag at all. During runtime the
pm_runtime_get_sync() from i2c_dw_xfer() will always ensure that the
adapter is resumed when necessary.
The suspended flag check is only necessary to check proper suspend/resume
ordering during normal suspend/resume which makes the pm_runtime_get_sync()
call a no-op.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Document RZ/V2L CANFD bindings. RZ/V2L CANFD is identical to one found on
the RZ/G2L SoC. No driver changes are required as generic compatible
string "renesas,rzg2l-canfd" will be used as a fallback.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220227213250.23637-1-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Because clk_disable_unprepare already checked NULL clock parameter,
so the additional checks are unnecessary, just remove it
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Address the following W=1 kernel build warning:
kernel/power/swap.c:120: warning: This comment starts with '/**', but
isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This expands generic branch type classification by adding two more entries
there in i.e irq and exception return. Also updates the x86 implementation
to process X86_BR_IRET and X86_BR_IRQ records as appropriate. This changes
branch types reported to user space on x86 platform but it should not be a
problem. The possible scenarios and impacts are enumerated here.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1645681014-3346-1-git-send-email-anshuman.khandual@arm.com
|
|
Support 64-bit BAR size for discovery, and do not truncate return from
generic_uncore_mmio_box_ctl() to 32 bits.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20220218175418.421268-1-steve.wahl@hpe.com
|
|
TASK_RTLOCK_WAIT currently isn't part of TASK_REPORT, thus a task blocking
on an rtlock will appear as having a task state == 0, IOW TASK_RUNNING.
The actual state is saved in p->saved_state, but reading it after reading
p->__state has a few issues:
o that could still be TASK_RUNNING in the case of e.g. rt_spin_lock
o ttwu_state_match() might have changed that to TASK_RUNNING
As pointed out by Eric, adding TASK_RTLOCK_WAIT to TASK_REPORT implies
exposing a new state to userspace tools which way not know what to do with
them. The only information that needs to be conveyed here is that a task is
waiting on an rt_mutex, which matches TASK_UNINTERRUPTIBLE - there's no
need for a new state.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20220120162520.570782-3-valentin.schneider@arm.com
|
|
As of commit
c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu")
the following sequence becomes possible:
p->__state = TASK_INTERRUPTIBLE;
__schedule()
deactivate_task(p);
ttwu()
READ !p->on_rq
p->__state=TASK_WAKING
trace_sched_switch()
__trace_sched_switch_state()
task_state_index()
return 0;
TASK_WAKING isn't in TASK_REPORT, so the task appears as TASK_RUNNING in
the trace event.
Prevent this by pushing the value read from __schedule() down the trace
event.
Reported-by: Abhijeet Dharmapurikar <adharmap@quicinc.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20220120162520.570782-2-valentin.schneider@arm.com
|
|
John reported that push_rt_task() can end up invoking
find_lowest_rq(rq->curr) when curr is not an RT task (in this case a CFS
one), which causes mayhem down convert_prio().
This can happen when current gets demoted to e.g. CFS when releasing an
rt_mutex, and the local CPU gets hit with an rto_push_work irqwork before
getting the chance to reschedule. Exactly who triggers this work isn't
entirely clear to me - switched_from_rt() only invokes rt_queue_pull_task()
if there are no RT tasks on the local RQ, which means the local CPU can't
be in the rto_mask.
My current suspected sequence is something along the lines of the below,
with the demoted task being current.
mark_wakeup_next_waiter()
rt_mutex_adjust_prio()
rt_mutex_setprio() // deboost originally-CFS task
check_class_changed()
switched_from_rt() // Only rt_queue_pull_task() if !rq->rt.rt_nr_running
switched_to_fair() // Sets need_resched
__balance_callbacks() // if pull_rt_task(), tell_cpu_to_push() can't select local CPU per the above
raw_spin_rq_unlock(rq)
// need_resched is set, so task_woken_rt() can't
// invoke push_rt_tasks(). Best I can come up with is
// local CPU has rt_nr_migratory >= 2 after the demotion, so stays
// in the rto_mask, and then:
<some other CPU running rto_push_irq_work_func() queues rto_push_work on this CPU>
push_rt_task()
// breakage follows here as rq->curr is CFS
Move an existing check to check rq->curr vs the next pushable task's
priority before getting anywhere near find_lowest_rq(). While at it, add an
explicit sched_class of rq->curr check prior to invoking
find_lowest_rq(rq->curr). Align the DL logic to also reschedule regardless
of next_task's migratability.
Fixes: a7c81556ec4d ("sched: Fix migrate_disable() vs rt/dl balancing")
Reported-by: John Keeping <john@metanate.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20220127154059.974729-1-valentin.schneider@arm.com
|
|
The cpuacct_account_field() and it's cgroup v2 wrapper
cgroup_account_cputime_field() is only called from cputime
in task_group_account_field(), which is already in RCU read-side
critical section. So remove these redundant RCU read lock.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220220051426.5274-3-zhouchengming@bytedance.com
|
|
Since cpuacct_charge() is called from the scheduler update_curr(),
we must already have rq lock held, then the RCU read lock can
be optimized away.
And do the same thing in it's wrapper cgroup_account_cputime(),
but we can't use lockdep_assert_rq_held() there, which defined
in kernel/sched/sched.h.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220220051426.5274-2-zhouchengming@bytedance.com
|
|
The cpuacct_account_field() is always called by the current task
itself, so it's ok to use __this_cpu_add() to charge the tick time.
But cpuacct_charge() maybe called by update_curr() in load_balance()
on a random CPU, different from the CPU on which the task is running.
So __this_cpu_add() will charge that cputime to a random incorrect CPU.
Fixes: 73e6aafd9ea8 ("sched/cpuacct: Simplify the cpuacct code")
Reported-by: Minye Zhu <zhuminye@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220220051426.5274-1-zhouchengming@bytedance.com
|
|
Remove the second 'the'.
Replace the second 'of' with 'the'.
Replace 'couter' with 'counter'.
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When clock-div is 0 or greater than 1, the bus speed
calculated by the old speed calculation formula will be
larger than the target speed. So we update the formula.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
For a couple of times I have encountered a situation where
hv_balloon: Unhandled message: type: 12447
is being flooded over 1 million times per second with various values,
filling the log and consuming cycles, making debugging difficult.
Add rate limiting to the message.
Most other Hyper-V drivers already have similar rate limiting in their
message callbacks.
The cause of the floods in my case was probably fixed by 96d9d1fa5cd5
("Drivers: hv: balloon: account for vmbus packet header in
max_pkt_size").
Fixes: 9aa8b50b2b3d ("Drivers: hv: Add Hyper-V balloon driver")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220222141400.98160-1-anssi.hannula@bitwise.fi
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Kernel test robot reported incorrect type in argument 1 of readl(), but
more importantly it brought attention that MMIO accessor shouldn't be
used in this case, since req->hdr.status is part of a command-response
buffer in system memory.
Since its value may be altered by PSP outside of the scope of current
thread (somehow similar to IRQ handler case), we need to use
READ_ONCE() to ensure compiler won't optimize this call.
Fix also 'status' variable type to reflect that corresponding field in
command-response buffer is platform-independent u32.
Fixes: 78d5e9e299e3 ("i2c: designware: Add AMD PSP I2C bus support")
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Do not call get_trip_hyst() from thermal_genl_cmd_tz_get_trip() if
the thermal zone does not define one.
Fixes: 1ce50e7d408e ("thermal: core: genetlink support for events/cmd/sampling")
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
QUP Serial engines supports data transfers thru FIFO mode, SE DMA mode
and lastly GPI DMA mode. Former two are already supported and this adds
supports for the last mode.
In GPI DMA mode, the firmware is issued commands by driver to perform
DMA and setup the serial port.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Read reset phandle as optional instead of exclusive so that all the DT's
passing the reset phandle can be used to assert/deassert the reset line.
With this change we don't have to differentiate the RZ/G2L SoC.
With the above changes we no longer need the "renesas,riic-r9a07g044"
compatible string, so drop it from riic_i2c_dt_ids[]. No changes are
required to the r9a07g044.dtsi as we already have "renesas,riic-rz" as a
fallback compatible string.
While at it, check the return code of reset_control_deassert() as it might
fail and also add a devres action to assert the reset line.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Exit to userspace if setup_vmgexit_scratch() fails due to OOM or because
copying data from guest (userspace) memory failed/faulted. The OOM
scenario is clearcut, it's userspace's decision as to whether it should
terminate the guest, free memory, etc...
As for -EFAULT, arguably, any guest issue is a violation of the guest's
contract with userspace, and thus userspace needs to decide how to
proceed. E.g. userspace defines what is RAM vs. MMIO and communicates
that directly to the guest, KVM is not involved in deciding what is/isn't
RAM nor in communicating that information to the guest. If the scratch
GPA doesn't resolve to a memslot, then the guest is not honoring the
memory configuration as defined by userspace.
And if userspace unmaps an hva for whatever reason, then exiting to
userspace with -EFAULT is absolutely the right thing to do. KVM's ABI
currently sucks and doesn't provide enough information to act on the
-EFAULT, but that will hopefully be remedied in the future as there are
multiple use cases, e.g. uffd and virtiofs truncation, that shouldn't
require any work in KVM beyond returning -EFAULT with a small amount of
metadata.
KVM could define its ABI such that failure to access the scratch area is
reflected into the guest, i.e. establish a contract with userspace, but
that's undesirable as it limits KVM's options in the future, e.g. in the
potential uffd case any failure on a uaccess needs to kick out to
userspace. KVM does have several cases where it reflects these errors
into the guest, e.g. kvm_pv_clock_pairing() and Hyper-V emulation, but
KVM would preferably "fix" those instead of propagating the falsehood
that any memory failure is the guest's fault.
Lastly, returning a boolean as an "error" for that a helper that isn't
named accordingly never works out well.
Fixes: ad5b353240c8 ("KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure")
Cc: Alper Gun <alpergun@google.com>
Cc: Peter Gonda <pgonda@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220225205209.3881130-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
make dt_binding_check:
Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml:19:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
Fixes: f1bd6661946b20d1 ("dt-bindings: i2c: add bindings for microchip mpfs i2c")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
When a genpd with GENPD_FLAG_IRQ_SAFE gets removed, the following
sleep-in-atomic bug will be seen, as genpd_debug_remove() will be called
with a spinlock being held.
[ 0.029183] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1460
[ 0.029204] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1, name: swapper/0
[ 0.029219] preempt_count: 1, expected: 0
[ 0.029230] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.17.0-rc4+ #489
[ 0.029245] Hardware name: Thundercomm TurboX CM2290 (DT)
[ 0.029256] Call trace:
[ 0.029265] dump_backtrace.part.0+0xbc/0xd0
[ 0.029285] show_stack+0x3c/0xa0
[ 0.029298] dump_stack_lvl+0x7c/0xa0
[ 0.029311] dump_stack+0x18/0x34
[ 0.029323] __might_resched+0x10c/0x13c
[ 0.029338] __might_sleep+0x4c/0x80
[ 0.029351] down_read+0x24/0xd0
[ 0.029363] lookup_one_len_unlocked+0x9c/0xcc
[ 0.029379] lookup_positive_unlocked+0x10/0x50
[ 0.029392] debugfs_lookup+0x68/0xac
[ 0.029406] genpd_remove.part.0+0x12c/0x1b4
[ 0.029419] of_genpd_remove_last+0xa8/0xd4
[ 0.029434] psci_cpuidle_domain_probe+0x174/0x53c
[ 0.029449] platform_probe+0x68/0xe0
[ 0.029462] really_probe+0x190/0x430
[ 0.029473] __driver_probe_device+0x90/0x18c
[ 0.029485] driver_probe_device+0x40/0xe0
[ 0.029497] __driver_attach+0xf4/0x1d0
[ 0.029508] bus_for_each_dev+0x70/0xd0
[ 0.029523] driver_attach+0x24/0x30
[ 0.029534] bus_add_driver+0x164/0x22c
[ 0.029545] driver_register+0x78/0x130
[ 0.029556] __platform_driver_register+0x28/0x34
[ 0.029569] psci_idle_init_domains+0x1c/0x28
[ 0.029583] do_one_initcall+0x50/0x1b0
[ 0.029595] kernel_init_freeable+0x214/0x280
[ 0.029609] kernel_init+0x2c/0x13c
[ 0.029622] ret_from_fork+0x10/0x20
It doesn't seem necessary to call genpd_debug_remove() with the lock, so
move it out from locking to fix the problem.
Fixes: 718072ceb211 ("PM: domains: create debugfs nodes when adding power domains")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: 5.11+ <stable@vger.kernel.org> # 5.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Instead of manually disabling interrupts before invoking use
generic_handle_irq_safe() which can be invoked with enabled and disabled
interrupts.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The i2c-i801 driver invokes i2c_handle_smbus_host_notify() from his
interrupt service routine. On PREEMPT_RT i2c-i801's handler is forced
threaded with enabled interrupts which leads to a warning by
handle_irq_event_percpu() assuming that irq_default_primary_handler()
enabled interrupts.
i2c-i801's interrupt handler can't be made non-threaded because the
interrupt line is shared with other devices.
Use generic_handle_irq_safe() which can invoked with disabled and enabled
interrupts.
Reported-by: Michael Below <below@judiz.de>
Link: https://bugs.debian.org/1002537
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
mvebu arm for 5.18 (part 1)
gpio clean-up for Orion
* tag 'mvebu-arm-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: orion/gpio: Get rid of unused first parameter in orion_gpio_init()
Link: https://lore.kernel.org/r/87sfs1zrfn.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
dev_err_probe() can reduce code size, makes the code easier to read
and has the added benefit of recording the defer reason for later
read out. Use it where appropriate.
This also fixes an issue, where an error message in __genpd_dev_pm_attach
was not terminated by a line break.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The function alloc_workqueue() in nintendo_hid_probe() can fail, but
there is no check of its return value. To fix this bug, its return value
should be checked with new error handling code.
Fixes: c4eae84feff3e ("HID: nintendo: add rumble support")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
mvebu dt for 5.18 (part 1)
Add new 2 bays NAS:
- Ctera C200 V1 (kirkwood based)
- Ctera C200 V2 (armada-370 based)
Add support for PCIe legacy INTx interrupts on Armada 385
Add PCIe proprty to limit the power on miniPCIe slots in Turris Omnia
* tag 'mvebu-dt-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: turris-omnia: Set PCIe slot-power-limit-milliwatt properties
ARM: dts: mvebu: Add Ctera C-200 V2 board
ARM: dts: kirkwood: Add Ctera C-200 V1 board
dt-bindings: vendor-prefixes: Add Ctera Networks
ARM: dts: armada-385.dtsi: Add definitions for PCIe legacy INTx interrupts
Link: https://lore.kernel.org/r/87pmn5zrd0.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
mvebu dt64 for 5.18 (part 1)
Add PCIe clock resource for Armada 37xx
* tag 'mvebu-dt64-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: armada-37xx: Add clock to PCIe node
Link: https://lore.kernel.org/r/87v8wxzrlo.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A PM domain managed by genpd may support multiple idlestates (power-off
states). During genpd_power_off() a genpd governor may be asked to select
one of the idlestates based upon the dev PM QoS constraints, for example.
However, there is a problem with the behaviour around this in genpd. More
precisely, a parent-domain is allowed to be powered off, no matter of what
idlestate that has been selected for the child-domain.
For the stm32mp1 platform from STMicro, this behaviour doesn't play well.
Instead, the parent-domain must not be powered off, unless the deepest
idlestate has been selected for the child-domain. As the current behaviour
in genpd is quite questionable anyway, let's simply change it into what is
needed by the stm32mp1 platform.
If it surprisingly turns out that other platforms may need a different
behaviour from genpd, then we will have to revisit this to find a way to
make it configurable.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
`CONFIG_SATA_LPM_MOBILE_POLICY` reflects a configuration to apply only to
mobile chipsets. As some desktop boards may want to use this policy by
default as well, rename the configuration item to `SATA_LPM_POLICY`.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
`AHCI_HFLAG_IS_MOBILE` designates that a chipset should be using the
default link power management policy from a kernel configuration item.
As desktop chipsets may also be interested in this default policy
configuration, rename the flag to `AHCI_HFLAG_USE_LPM_POLICY` to more
accurately reflect that a chipset doesn't have to be mobile to adopt it.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
This board definition was originally created for mobile devices to
designate default link power managmeent policy to influence runtime
power consumption.
As this is interesting for more than just mobile designs, rename the
board to `board_ahci_low_power` to make it clear it is about default
policy.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
The HID core stack used to be very relaxed considering the BTN_TOOL_*
usage. With the recent commits, we should now enforce to have only one
tool at a time, meaning that we can now express that requirement in the
docs.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Multitouch devices in hybrid mode are reporting multiple times the
same collection. We should accommodate for this in our handling
of priorities by defining the slots they belong to.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
HID_QUIRK_INVERT is kind of complex to deal with and was bogus.
Furthermore, it didn't make sense to use a global per struct hid_device
quirk for something dynamic as the current state.
Store the current tool information in the report itself, and re-order
the processing of the fields to enforce having all the tablet "state"
fields before getting to In Range and other input fields.
This way, we now have all the information whether a tool is present
or not while processing In Range.
This new behavior enforces that only one tool gets forwarded to userspace
at the same time, and that if either eraser or invert is set, we enforce
BTN_TOOL_RUBBER.
Note that the release of the previous tool now happens in its own EV_SYN
report so userspace doesn't get confused by having 2 tools.
These changes are tested in the following hid-tools regression tests:
https://gitlab.freedesktop.org/libevdev/hid-tools/-/merge_requests/127
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
When a device exposes both Invert and InRange, Invert must be processed
before InRange. If we keep the order of the device and we process them
out of order, InRange will first set BTN_TOOL_PEN, and then Invert will
set BTN_TOOL_RUBBER. Userspace knows how to deal with that situation,
but fixing it in the kernel is now easier.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Now that we have a list of fields/usages by priority order,
walk through that list to process the inputs instead of using the
order provided by the manufacturer.
Note that this changes the way we update the values in the struct
hid_field:
Previously, once a field was processed, we updated the new values.
Now we need to wait for the entire report to be processed to update
the values.
I don't think it will be an issue: because we were relying on the device
ordering, there were no guarantees to have a field stored before an other.
Which is why we introduced .report() in drivers to have those values
updated.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This will be used in a later commit:
we build a list of input fields (and usage_index) that is ordered based
on a usage priority.
Changing the usage priority allows to re-order the processed list, meaning
that we can enforce some usages to be process before others.
For instance, before processing InRange in the HID tablets, we need to
know if we are using the eraser (side or button). Enforcing a higher
(lower number) priority for Invert allows to force the input stack to
process that field before.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
It actually makes sense to clamp the value to its boundaries before
doing further processing.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Instead of using multiple `if (a == b)`, use the switch statement
which has been done exactly for that.
There should be no functional change (I don't expect moving down
HID_QUIRK_{X|Y}_INVERT having any impact.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Some devices (Elan, Synaptics...) are sometimes not setting a physical
in their finger collections. hid-input will consider them to be pen
devices, leading to some wrong behavior in user space.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This is a preparatory patch for being able to process the usages
out of order. We split the retrieval of the data in a separate function
and also split out the processing of the usages depending if the field
is an array or a variable.
No functional changes from this patch.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
I had to go twice through the history to get a grasp at this code.
De-duplicate the various tests in one common helper to make it
more explicit.
Note that the `HID_UP_KEYBOARD + 1` condition is tested through
https://gitlab.freedesktop.org/libevdev/hid-tools/-/merge_requests/121
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This is a preparation patch for rethinking the generic processing
of HID reports.
We can actually pre-allocate all of our memory instead of dynamically
allocating/freeing it whenever we parse a report.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
Lad Prabhakar
Hans de Goede
Xu Wang
Jiapeng Chong
Anshuman Khandual
Steve Wahl
Valentin Schneider
Chengming Zhou
Tom Rix
Kewei Xu
Anssi Hannula
Jan Dabros
Nicolas Cavallari
Vinod Koul
Sean Christopherson
Geert Uytterhoeven
Shawn Guo
Sebastian Andrzej Siewior
Arnd Bergmann
Ahmad Fatoum
Jia-Ju Bai
Ulf Hansson
Mario Limonciello
Benjamin Tissoires