| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Augment the AB8500 fuel gauge to use the VBAT-to-Ri method of
estimating the internal resistance if possible. Else fall back
to using the temperature-to-Ri or just the default Ri.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
In Samsung devices, the method used to compensate for temperature,
age, load etc is by way of VBAT to Ri tables, which correlates the
battery voltage under load (VBAT) to an internal resistance (Ri).
Using this Ri and a measurement of the current out of the battery
(IBAT) the open circuit voltage (OCV) can be calculated as:
OCV = VBAT - (Ri * IBAT)
The details are described in comments to struct
power_supply_battery_info in the commit.
Since not all batteries supply this VBAT-to-Ri data, the fallback
method to use the temperature-to-Ri lookup table can also be used
as a fallback.
Add two helper functions to check if we have the tables needed for
using power_supply_vbat2ri() or power_supply_temp2resist_simple()
respectively, so capacity estimation code can choose which one
to employ.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The Battery Type Indicator (BTI) resistor is a resistor mounted
between a special terminal on the battery and ground. By sending
a fixed current (such as 7mA) through this resistor and measuring
the voltage over it, the resistance can be determined, and this
verifies the battery type.
Typical side view of the battery:
o o o
GND BTI +3.8V
Typical example of the electrical layout:
+3.8 V BTI
| |
| + |
_______ [ ] 7kOhm
___ |
| |
| |
GND GND
By verifying this resistance before attempting to charge the
battery we add an additional level of security.
In some systems this is used for plug-and-play of batteries with
different capacity. In other cases, this is merely used to verify
that the right type of battery is connected, if several batteries
have the same physical shape and can be plugged into the same
slot. Sometimes this is just a surplus security mechanism.
Nokia and Samsung among many other vendors are known to use these
BTI resistors.
Add the BTI properties to struct power_supply_battery_info and
switch the AB8500 charger code over to using it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The AB8500 code is using a special current and voltage setting
when the battery is in "alert mode", i.e. when it is starting
to go outside normal operating conditions so it is too
cold or too hot. This makes sense as a way for the charging
algorithm to deal with hostile environments.
Add the needed members to the struct power_supply_battery_info,
and switch the AB8500 charging code over to using this.
Reviewed-by: Matti Vaittineen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Maintenance charging is the phase of keeping up the charge
after the battery has charged fully using CC/CV charging.
This can be done in many successive phases and is usually
done with a slightly lower constant voltage than CV, and
a slightly lower allowed current.
Add an array of maintenance charging points each with a
current, voltage and safety timer, and add helper functions
to use these. Migrate the AB8500 code over.
This is used in several Samsung products using the AB8500
and these batteries and their complete parameters will
be added later as full examples, but the default battery
in the AB8500 code serves as a reasonable example so far.
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
An ADC is often used to measure other quantities indirectly.
This binding describe one case, the measurement of a temperature
through a temperature transducer (either voltage or current).
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220213025739.2561834-11-liambeguin@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
An ADC is often used to measure other quantities indirectly. This
binding describe one case, the measurement of a temperature through the
voltage across an RTD resistor such as a PT1000.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220213025739.2561834-10-liambeguin@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
A temperature transducer is a device that converts a thermal quantity
into any other physical quantity. This patch adds support for
temperature to voltage (like the LTC2997) and temperature to current
(like the AD590) linear transducers.
In both cases these are assumed to be connected to a voltage ADC.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220213025739.2561834-9-liambeguin@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
An RTD (Resistance Temperature Detector) is a kind of temperature
sensor used to get a linear voltage to temperature reading within a
give range (usually 0 to 100 degrees Celsius). Common types of RTDs
include PT100, PT500, and PT1000.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220213025739.2561834-8-liambeguin@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The iio-rescale driver supports various combinations of scale types and
offsets. These can often result in large integer multiplications. Make
sure these calculations are done right by adding a set of kunit test
cases that build on top of iio-test-format.
To run these tests, add the following to .kunitconfig
$ cat .kunitconfig
CONFIG_IIO=y
CONFIG_IIO_RESCALE_KUNIT_TEST=y
CONFIG_KUNIT=y
Then run:
$ ./tools/testing/kunit/kunit.py run --kunitconfig .kunitconfig
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220213025739.2561834-7-liambeguin@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add watchdog device node to MT8192 SoC.
Signed-off-by: Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220207094024.22674-1-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Initialize bpc while creating panel_desc structure for RK101II01D-CT
Below warning is triggered since bpc is not being initialized
WARNING: CPU: 2 PID: 47 at drivers/gpu/drm/panel/panel-simple.c:614
panel_simple_probe+0x1b0/0x3c8
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220210140300.11900-1-r-ravikumar@ti.com
|
|
Add MODULE_DEVICE_TABLE to the device tree table to create required
aliases needed for module to be loaded with device tree based platform.
Fixes: e19233955d9e ("drm/bridge: Add Cadence DSI driver")
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921174059.17946-1-nm@ti.com
|
|
Add a driver that will work with most MIPI DBI compatible SPI panels.
This avoids adding a driver for every new MIPI DBI compatible controller
that is to be used by Linux. The 'compatible' Device Tree property with
a '.bin' suffix will be used to load a firmware file that contains the
controller configuration.
Example (driver will load sainsmart18.bin):
display@0 {
compatible = "sainsmart18", "panel-mipi-dbi-spi";
...
};
v5:
- kconfig: s/DRM_KMS_CMA_HELPER/DRM_GEM_CMA_HELPER/ (Sam)
- kconfig: Add select VIDEOMODE_HELPERS (Sam)
- kconfig: Add wiki url in the description (Sam)
- Split out and use of_get_drm_panel_display_mode()(Sam)
- Only use the first compatible to look for a firmware file since the
binding mandates 2 compatibles.
- Make having a firmware file mandatory so we can print an error
message if it's missing to improve the user experience. It's very
unlikely that a controller doesn't need to be initialized and if
it doesn't, it's possible to have a firmware file containing only
a DCS NOP.
v4:
- Move driver to drm/tiny where the other drivers of its kind are located.
The driver module will not be shared with a future DPI driver after all.
v3:
- Move properties to DT (Maxime)
- The MIPI DPI spec has optional support for DPI where the controller is
configured over DBI. Rework the command functions so they can be moved
to drm_mipi_dbi and shared with a future panel-mipi-dpi-spi driver
v2:
- Drop model property and use compatible instead (Rob)
- Add wiki entry in MAINTAINERS
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220227124713.39766-6-noralf@tronnes.org
|
|
devm_drm_dev_alloc() can't allocate structures that embed a structure
which then again embeds drm_device. Workaround this by adding a
driver_private pointer to struct mipi_dbi_dev which the driver can use for
its additional state.
v3:
- Add documentation
Acked-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220227124713.39766-5-noralf@tronnes.org
|
|
Add a function to get a drm_display_mode from a panel-timing
device tree subnode.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220227124713.39766-4-noralf@tronnes.org
|
|
Remove trailing whitespace from a comment.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220227124713.39766-3-noralf@tronnes.org
|
|
Add binding for MIPI DBI compatible SPI panels.
v6:
- Fix indentation (Rob)
v5:
- Add sainsmart18 to compatible items (Rob)
- Expand write-only description (Sam)
v4:
- There should only be two compatible (Maxime)
- s/panel-dbi-spi/panel-mipi-dbi-spi/in compatible
v3:
- Move properties to Device Tree (Maxime)
- Use contains for compatible (Maxime)
- Add backlight property to example
- Flesh out description
v2:
- Fix path for panel-common.yaml
- Use unevaluatedProperties
- Drop properties which are in the allOf section
- Drop model property (Rob)
Acked-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220227124713.39766-2-noralf@tronnes.org
|
|
When the "block" flag is false, the old code would sometimes still call
check_var_size(), which wrongly tells ->query_variable_store() that it can
block.
As far as I can tell, this can't really materialize as a bug at the moment,
because ->query_variable_store only does something on X86 with generic EFI,
and in that configuration we always take the efivar_entry_set_nonblocking()
path.
Fixes: ca0e30dcaa53 ("efi: Add nonblocking option to efi_query_variable_store()")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220218180559.1432559-1-jannh@google.com
|
|
The get_boot_hartid_from_fdt() function currently returns U32_MAX
for failure case which is not correct because U32_MAX is a valid
hartid value. This patch fixes the issue by returning error code.
Cc: <stable@vger.kernel.org>
Fixes: d7071743db31 ("RISC-V: Add EFI stub support.")
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Some things changed, and add two useful links.
v2: Also include a link to the QR encoding work. Plus review from
Javier.
v3: Fix typo Guilherme spotted.
Reviewed-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: gpiccoli@igalia.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220224132425.3463791-1-daniel.vetter@ffwll.ch
|
|
Check that mappable vs non-mappable matches our expectations.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225145502.331818-7-matthew.auld@intel.com
|
|
Otherwise we get -EINVAL, instead of the more useful -E2BIG if the
allocation doesn't fit within the pfn range, like with mappable lmem.
The hugepages selftest, for example, needs this to know if a smaller
size is needed.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225145502.331818-6-matthew.auld@intel.com
|
|
Differentiate between mappable vs non-mappable resources, also if this
is an actual range allocation ensure we set res->start as the starting
pfn. Later when we need to do non-mappable -> mappable moves then we
want TTM to see that the current placement is not compatible, which
should result in an actual move, instead of being turned into a noop.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225145502.331818-5-matthew.auld@intel.com
|
|
Track the total amount of available visible memory, and also track
per-resource the amount of used visible memory. For now this is useful
for our debug output, and deciding if it is even worth calling into the
buddy allocator. In the future tracking the per-resource visible usage
will be useful for when deciding if we should attempt to evict certain
buffers.
v2:
- s/place->lpfn/lpfn/, that way we can avoid scanning the list if the
entire range is already mappable.
- Move the end declaration inside the if block(Thomas).
- Make sure to also account for reserved memory.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225145502.331818-4-matthew.auld@intel.com
|
|
If the user doesn't require CPU access for the buffer, then
ALLOC_GPU_ONLY should be used, in order to prioritise allocating in the
non-mappable portion of LMEM, on devices with small BAR.
v2(Thomas):
- The BO_ALLOC_TOPDOWN naming here is poor, since this is pure lies on
systems that don't even have small BAR. A better name is GPU_ONLY,
which is accurate regardless of the configuration.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225145502.331818-3-matthew.auld@intel.com
|
|
On devices with non-mappable LMEM ensure we always allocate the pages
within the mappable portion. For now we assume that all LMEM buffers
will require CPU access, which is also inline with pretty much all
current kernel internal users. In the next patch we will introduce a new
flag to override this behaviour.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225145502.331818-2-matthew.auld@intel.com
|
|
With small LMEM-BAR we need to be able to differentiate between the
total size of LMEM, and how much of it is CPU mappable. The end goal is
to be able to utilize the entire range, even if part of is it not CPU
accessible.
v2: also update intelfb_create
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225145502.331818-1-matthew.auld@intel.com
|
|
We need the staging fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the driver core fix in here as well for future changes.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the char-misc fixes in here.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Increase the size of the buffer and set the ftrace-size property in order
to collect event tracing during a crash.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20211202224525.29178-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This is the documented name used for OpenBMC systems:
https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md#rtc-battery-voltage-read-enable
Link: https://lore.kernel.org/r/20220222041559.68651-3-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This is the documented name used for OpenBMC systems:
https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md#rtc-battery-voltage-read-enable
Link: https://lore.kernel.org/r/20220222041559.68651-2-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Make the samsung-keypad driver explicitly depend on CONFIG_HAS_IOMEM, as it
calls devm_ioremap(). This prevents compile errors in some configs (e.g,
allyesconfig/randconfig under UML):
/usr/bin/ld: drivers/input/keyboard/samsung-keypad.o: in function `samsung_keypad_probe':
samsung-keypad.c:(.text+0xc60): undefined reference to `devm_ioremap'
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: anton ivanov <anton.ivanov@cambridgegreys.com>
Link: https://lore.kernel.org/r/20220225041727.1902850-1-davidgow@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This is a half-width, single-socket Epyc server board with an AST2500
BMC. This device tree is sufficient for basic OpenBMC functionality,
but we'll need to add a few more devices (as driver support becomes
available) before it's fully usable.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220105101719.7093-1-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This backmerges v5.17-rc6 so I can merge some amdgpu and some tegra changes on top.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Early Rainier builds had SPI NOR as a fallback boot device when eMMC
was not programmed. Most systems don't have the NOR populated, so remove
it from the device tree as it is not used.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220120063307.63898-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Move adc14 and adc15 (battery sensor) into single iio-hwmon node to
correct label to be read by single application for all adc sensors.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220228000242.1884-6-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
GPIO hog nodes must have a "hog-" prefix or "-hog" suffix according to
the DT schema. Rename the node to pass dtbs_check.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220228000242.1884-5-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Update the input GPIO that indicates Host ready.
Link: https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md#host-ready
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220228000242.1884-4-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Update the output pin name that enables reading RTC battery voltage.
Link: https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md#rtc-battery-voltage-read-enable
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220228000242.1884-3-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Enable the secondary flash of the Ampere's Mt. Jade's BMC.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220228000242.1884-2-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Fixups
- Make display controller drivers for Exynos series to use
platform_get_irq and platform_get_irq_byname functions
to get the interrupt, which prevents irq chaning from messed up
when using hierarchical interrupt domains which use "interrupts"
property in the node.
- Fix two regressions to TE-gpio handling.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225014042.17637-1-inki.dae@samsung.com
|
|
Mediatek DRM Next for Linux 5.18
1. Transfer display binding document to yaml format.
2. Add mt8195 display device binding.
3. Allow commands to be sent during video mode.
4. Add wait_for_event for crtc disable by cmdq.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1645934583-2018-1-git-send-email-chunkuang.hu@kernel.org
|
|
Function queue_work() returns a bool, so use a bool to hold this value for
the return code from callers, which should make the code a tiny bit more
clear.
Also take this opportunity to condense the code of the those callers, such
as sas_queue_work(), as suggested by Damien.
Link: https://lore.kernel.org/r/1645786656-221630-3-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Nobody checks the return codes, so make them return void. Indeed, if the
LLDD cannot send an event, nothing much can be done in the LLDD about it.
Also remove prototype for sas_notify_phy_event() in sas_internal.h, which
should not be there.
Link: https://lore.kernel.org/r/1645786656-221630-2-git-send-email-john.garry@huawei.com
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In case of SSP underflow allow the response frame IU to be examined for
setting the response stat value rather than always setting
SAS_DATA_UNDERRUN.
This will mean that we call sas_ssp_task_response() in those scenarios and
may send sense data to upper layer.
Such a condition would be for bad blocks were we just reporting an
underflow error to upper layer, but now the sense data will tell
immediately that the media is faulty.
Link: https://lore.kernel.org/r/1645703489-87194-7-git-send-email-john.garry@huawei.com
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add a file operation for "cnt" file under bist directory, so users can only
read "cnt" or clear "cnt" to zero, but cannot randomly modify.
Link: https://lore.kernel.org/r/1645703489-87194-6-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
To avoid doubt, rename the error labels to indicate the action they will
take.
Link: https://lore.kernel.org/r/1645703489-87194-5-git-send-email-john.garry@huawei.com
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
Linus Walleij
Liam Beguin
Allen-KH Cheng
Rahul T R
Nishanth Menon
Noralf Trønnes
Jann Horn
Sunil V L
Daniel Vetter
Matthew Auld
Greg Kroah-Hartman
Eddie James
Joel Stanley
David Gow
Zev Weiss
Dave Airlie
Quan Nguyen
John Garry
Xingui Yang
Xiang Chen
Qi Liu