aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-09-24drm-print: add drm_dbg_driver to improve namespace symmetryJim Cromie1-1/+2
drm_print defines all of these: drm_dbg_{core,kms,prime,atomic,vbl,lease,_dp,_drmres} but not drm_dbg_driver itself, since it was the original drm_dbg. To improve namespace symmetry, change the drm_dbg defn to drm_dbg_driver, and redef grandfathered name to symmetric one. This will help with nouveau, which uses its own stack of macros to construct calls to dev_info, dev_dbg, etc, for which adaptation means drm_dbg_##driver constructs. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20220912052852.1123868-7-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24drm-print.h: include dyndbg headerJim Cromie1-0/+1
lkp robot told me: >> drivers/gpu/drm/drm_ioc32.c:989:2: error: call to undeclared function '_dynamic_func_call_cls'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration] DRM_DEBUG("comm=\"%s\", pid=%d, dev=0x%lx, auth=%d, %s\n", Since that macro is defined in drm_print.h, and under DRM_USE_DYN*=y configs, invokes dyndbg-factory macros, include dynamic_debug.h from there too, so that those configs have the definitions of all the macros in the callchain. This is done as a separate patch mostly to see how lkp sorts it. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20220912052852.1123868-6-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24drm_print: wrap drm_*_dbg in dyndbg descriptor factory macroJim Cromie3-0/+26
For CONFIG_DRM_USE_DYNAMIC_DEBUG=y, wrap __drm_dbg() & __drm_dev_dbg() in one of dyndbg's Factory macros: _dynamic_func_call_no_desc(). This adds the callsite descriptor into the code, and an entry for each into /proc/dynamic_debug/control. #> echo class DRM_UT_ATOMIC +p > /proc/dynamic_debug/control CONFIG_DRM_USE_DYNAMIC_DEBUG=y/n is configurable because of the .data footprint cost of per-callsite control; 56 bytes/site * ~2k for i915, ~4k callsites for amdgpu. This is large enough that a kernel builder might not want it. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20220912052852.1123868-5-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24drm_print: interpose drm_*dbg with forwarding macrosJim Cromie2-7/+12
change drm_dev_dbg & drm_dbg to macros, which forward to the renamed functions (with __ prefix added). Those functions sit below the categorized layer of macros implementing the DRM debug.category API, and implement most of it. These are good places to insert dynamic-debug jump-label mechanics, which will allow DRM to avoid the runtime cost of drm_debug_enabled(). no functional changes. memory cost baseline: (unchanged) bash-5.1# drms_load [ 9.220389] dyndbg: 1 debug prints in module drm [ 9.224426] ACPI: bus type drm_connector registered [ 9.302192] dyndbg: 2 debug prints in module ttm [ 9.305033] dyndbg: 8 debug prints in module video [ 9.627563] dyndbg: 127 debug prints in module i915 [ 9.721505] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 10.091345] dyndbg: 2196 debug prints in module amdgpu [ 10.106589] [drm] amdgpu kernel modesetting enabled. [ 10.107270] amdgpu: CRAT table not found [ 10.107926] amdgpu: Virtual CRAT table created for CPU [ 10.108398] amdgpu: Topology: Add CPU node [ 10.168507] dyndbg: 3 debug prints in module wmi [ 10.329587] dyndbg: 3 debug prints in module nouveau Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20220912052852.1123868-4-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.Jim Cromie7-3/+92
Use DECLARE_DYNDBG_CLASSMAP across DRM: - in .c files, since macro defines/initializes a record - in drivers, $mod_{drv,drm,param}.c ie where param setup is done, since a classmap is param related - in drm/drm_print.c since existing __drm_debug param is defined there, and we ifdef it, and provide an elaborated alternative. - in drm_*_helper modules: dp/drm_dp - 1st item in makefile target drivers/gpu/drm/drm_crtc_helper.c - random pick iirc. Since these modules all use identical CLASSMAP declarations (ie: names and .class_id's) they will all respond together to "class DRM_UT_*" query-commands: :#> echo class DRM_UT_KMS +p > /proc/dynamic_debug/control NOTES: This changes __drm_debug from int to ulong, so BIT() is usable on it. DRM's enum drm_debug_category values need to sync with the index of their respective class-names here. Then .class_id == category, and dyndbg's class FOO mechanisms will enable drm_dbg(DRM_UT_KMS, ...). Though DRM needs consistent categories across all modules, thats not generally needed; modules X and Y could define FOO differently (ie a different NAME => class_id mapping), changes are made according to each module's private class-map. No callsites are actually selected by this patch, since none are class'd yet. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20220912052852.1123868-3-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24drm_print: condense enum drm_debug_categoryJim Cromie1-11/+11
enum drm_debug_category has 10 categories, but is initialized with bitmasks which require 10 bits of underlying storage. By using natural enumeration, and moving the BIT(cat) into drm_debug_enabled(), the enum fits in 4 bits, allowing the category to be represented directly in pr_debug callsites, via the ddebug.class_id field. While this slightly pessimizes the bit-test in drm_debug_enabled(), using dyndbg with JUMP_LABEL will avoid the function entirely. NOTE: this change forecloses the possibility of doing: drm_dbg(DRM_UT_CORE|DRM_UT_KMS, "weird 2-cat experiment") but thats already strongly implied by the use of the enum itself; its not a normal enum if it can be 2 values simultaneously. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20220912052852.1123868-2-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fopsChenXiaoSong1-13/+3
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com> Link: https://lore.kernel.org/r/20220923102554.2443452-1-chenxiaosong2@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs()Yang Yingliang1-1/+1
Use IS_ERR_OR_NULL() helper in device_create_groups_vargs() to simplify code and improve readiblity. No functional change. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220914140753.3799982-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24firmware: google: Test spinlock on panic path to avoid lockupsGuilherme G. Piccoli1-0/+9
Currently the gsmi driver registers a panic notifier as well as reboot and die notifiers. The callbacks registered are called in atomic and very limited context - for instance, panic disables preemption and local IRQs, also all secondary CPUs (not executing the panic path) are shutdown. With that said, taking a spinlock in this scenario is a dangerous invitation for lockup scenarios. So, fix that by checking if the spinlock is free to acquire in the panic notifier callback - if not, bail-out and avoid a potential hang. Fixes: 74c5b31c6618 ("driver: Google EFI SMI") Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: David Gow <davidgow@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julius Werner <jwerner@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Link: https://lore.kernel.org/r/20220909200755.189679-1-gpiccoli@igalia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24bus: mvebu-mbus: use DEFINE_SHOW_ATTRIBUTE to simplify mvebu_{sdram/devs}_debugLiu Shixin1-24/+2
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20220916141244.2174005-1-liushixin2@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24MAINTAINERS: Add header files under VMWARE VMCI DRIVERVishnu Dasa1-0/+1
Add include/linux/vmw_vmci* files under VMWARE VMCI DRIVER. Suggested-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Bryan Tan <bryantan@vmware.com> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Vishnu Dasa <vdasa@vmware.com> Link: https://lore.kernel.org/r/20220915031321.1121-1-vdasa@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24mei: gsc: Remove redundant dev_err callShang XiaoJing1-1/+0
devm_ioremap_resource() prints error message in itself. Remove the dev_err call to avoid redundant error message. Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20220923100841.17719-1-shangxiaojing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24mei: fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'from'. Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Link: https://lore.kernel.org/r/20220918100431.28381-1-yuanjilin@cdjrlc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24drivers/misc/sgi-xp: Remove orphan declarations from drivers/misc/sgi-xp/xp.hGaosheng Cui1-4/+0
Remove the following orphan declarations from drivers/misc/sgi-xp/xp.h: 1. xp_nofault_PIOR_target 2. xp_error_PIOR 3. xp_nofault_PIOR They have been removed since commit 9726bfcdb977 ("misc/sgi-xp: remove SGI SN2 support"), so remove them. Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20220913110356.764711-1-cuigaosheng1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24nvmem: u-boot-env: fix crc32 casting typeRafał Miłecki1-1/+1
This fixes: drivers/nvmem/u-boot-env.c:141:17: sparse: sparse: cast to restricted __le32 Fixes: d5542923f200 ("nvmem: add driver handling U-Boot environment variables") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-14-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24nvmem: lan9662-otp: add supportHoratiu Vultur3-0/+232
Add support for OTP controller available on LAN9662. The OTPC controls the access to a non-volatile memory. The size of the memory is 8KB. The OTPC can access the memory based on an offset. Implement both the read and the write functionality. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-13-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24dt-bindings: lan9662-otpc: document Lan9662 OTPCHoratiu Vultur1-0/+45
Document Lan9662 OTP controller. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-12-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24nvmem: u-boot-env: find Device Tree nodes for NVMEM cellsRafał Miłecki1-0/+1
DT binding allows specifying NVMEM cells as NVMEM device (provider) subnodes. Looks for such subnodes when building NVMEM cells. This allows NVMEM consumers to use U-Boot environment variables. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-11-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24dt-bindings: nvmem: Add SoC compatible for sm6115Iskren Chernev1-0/+1
Document SoC compatible for sm6115. Reviewed-by: Caleb Connolly <caleb@connolly.tech> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-10-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24nvmem: sort config symbols alphabeticallyRafał Miłecki2-206/+208
1. Match what most subsystems do 2. Simplify maintenance a bit 3. Reduce amount of conflicts for new drivers patches While at it unify indent level in Makefile. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-9-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24nvmem: prefix all symbols with NVMEM_Rafał Miłecki9-37/+37
This unifies all NVMEM symbols. They follow one style now. Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-8-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24dt-bindings: nvmem: qfprom: add IPQ8064 and SDM630 compatiblesKrzysztof Kozlowski1-0/+2
Document compatibles for QFPROM used on IPQ8064 and SDM630. They are compatible with generic QFPROM fallback. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-7-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24nvmem: brcm_nvram: Use kzalloc for allocating only one elementKenneth Lee1-1/+1
Use kzalloc(...) rather than kcalloc(1, ...) because the number of elements we are specifying in this case is 1, so kzalloc would accomplish the same thing and we can simplify. Signed-off-by: Kenneth Lee <klee33@uw.edu> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-6-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24dt-bindings: nvmem: mediatek: efuse: Add support for MT8188Johnson Wang1-0/+1
Add compatible for MT8188 SoC. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24nvmem: core: add error handling for dev_set_nameGaosheng Cui1-3/+9
The type of return value of dev_set_name is int, which may return wrong result, so we add error handling for it to reclaim memory of nvmem resource, and return early when an error occurs. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24mtd: allow getting MTD device associated with a specific DT nodeRafał Miłecki2-0/+29
MTD subsystem API allows interacting with MTD devices (e.g. reading, writing, handling bad blocks). So far a random driver could get MTD device only by its name (get_mtd_device_nm()). This change allows getting them also by a DT node. This API is required for drivers handling DT defined MTD partitions in a specific way (e.g. U-Boot (sub)partition with environment variables). Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24nvmem: add driver handling U-Boot environment variablesRafał Miłecki4-0/+234
U-Boot stores its setup as environment variables. It's a list of key-value pairs stored on flash device with a custom header. This commit adds an NVMEM driver that: 1. Provides NVMEM access to environment vars binary data 2. Extracts variables as NVMEM cells Current Linux's NVMEM sysfs API allows reading whole NVMEM data block. It can be used by user-space tools for reading U-Boot env vars block without the hassle of finding its location. Parsing will still need to be re-done there. Kernel-parsed NVMEM cells can be read however by Linux drivers. This may be useful for Ethernet drivers for reading device MAC address which is often stored as U-Boot env variable. Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24slimbus: qcom-ngd: Add error handling in of_qcom_slim_ngd_registerLin Yujun1-1/+7
No error handling is performed when platform_device_add() return fails. Refer to the error handling of driver_set_override(), add error handling for platform_device_add(). Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Lin Yujun <linyujun809@huawei.com> Link: https://lore.kernel.org/r/20220914031953.94061-1-linyujun809@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24nvmem: core: Fix memleak in nvmem_register()Gaosheng Cui1-9/+6
dev_set_name will alloc memory for nvmem->dev.kobj.name in nvmem_register, when nvmem_validate_keepouts failed, nvmem's memory will be freed and return, but nobody will free memory for nvmem->dev.kobj.name, there will be memleak, so moving nvmem_validate_keepouts() after device_register() and let the device core deal with cleaning name in error cases. Fixes: de0534df9347 ("nvmem: core: fix error handling while validating keepout regions") Cc: stable@vger.kernel.org Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916120402.38753-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24slimbus: qcom-ngd-ctrl: allow compile testing without QCOM_RPROC_COMMONKrzysztof Kozlowski1-1/+2
The Qualcomm common remote-proc code (CONFIG_QCOM_RPROC_COMMON) has necessary stubs, so it is not needed for compile testing. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122910.170730-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24slimbus: qcom-ngd: simplify error paths with dev_err_probeKrzysztof Kozlowski1-8/+5
Use dev_err_probe to skip printing of deferred probe errors and to simplify error paths. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122910.170730-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24slimbus: qcom-ngd: cleanup in probe error pathKrzysztof Kozlowski1-2/+11
Add proper error path in probe() to cleanup resources previously acquired/allocated to fix warnings visible during probe deferral: notifier callback qcom_slim_ngd_ssr_notify already registered WARNING: CPU: 6 PID: 70 at kernel/notifier.c:28 notifier_chain_register+0x5c/0x90 Modules linked in: CPU: 6 PID: 70 Comm: kworker/u16:1 Not tainted 6.0.0-rc3-next-20220830 #380 Call trace: notifier_chain_register+0x5c/0x90 srcu_notifier_chain_register+0x44/0x90 qcom_register_ssr_notifier+0x38/0x4c qcom_slim_ngd_ctrl_probe+0xd8/0x400 platform_probe+0x6c/0xe0 really_probe+0xbc/0x2d4 __driver_probe_device+0x78/0xe0 driver_probe_device+0x3c/0x12c __device_attach_driver+0xb8/0x120 bus_for_each_drv+0x78/0xd0 __device_attach+0xa8/0x1c0 device_initial_probe+0x18/0x24 bus_probe_device+0xa0/0xac deferred_probe_work_func+0x88/0xc0 process_one_work+0x1d4/0x320 worker_thread+0x2cc/0x44c kthread+0x110/0x114 ret_from_fork+0x10/0x20 Fixes: e1ae85e1830e ("slimbus: qcom-ngd-ctrl: add Protection Domain Restart Support") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122910.170730-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24slimbus: qcom-ngd: use correct error in message of pdr_add_lookup() failureKrzysztof Kozlowski1-1/+2
Use correct error code, instead of previous 'ret' value, when printing error from pdr_add_lookup() failure. Fixes: e1ae85e1830e ("slimbus: qcom-ngd-ctrl: add Protection Domain Restart Support") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122910.170730-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24wifi: rtw89: support for enable/disable MSDU aggregationKuan-Chung Chen1-0/+9
To enable/disable amsdu in set_tid_config, and currently only support to configure all tids (==0xff) for AMSDU, not individual tid. The command example is: iw wlan0 set tidconf tids 0xff amsdu off iw wlan0 set tidconf peer xx:xx:xx:xx:xx:xx tids 0xff amsdu on Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922012737.15091-1-pkshih@realtek.com
2022-09-24wifi: rtw89: disable 26-tone RU HE TB PPDU transmissionsKuan-Chung Chen3-0/+47
Align with the spec of 802.11ax, follow the conditions for not responding with an HE TB PPDU. When there are OBSS that cannot interpret 26-tone RU transmissions, we should disable such transmissions. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922012719.15037-1-pkshih@realtek.com
2022-09-24wifi: rtw89: support for processing P2P power savingDian-Syuan Yang8-0/+262
Support P2P client to process Notice of Absence (NoA) mechanism when it connects with P2P GO applying an NoA schedule. We define some action types including init, update, remove and terminate in h2c function to enable/disable NoA schedule. Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922010435.12167-6-pkshih@realtek.com
2022-09-24wifi: rtw89: support WMM-PS in P2P GO modeDian-Syuan Yang1-1/+3
To handle a connected client using WMM-PS, the P2P GO also need to enable this power save mechanism. We add WIPHY_FLAG_AP_UAPSD flag to support it and define maximum number of buffered frames the WMM GO may deliver to the WMM client. Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922010435.12167-5-pkshih@realtek.com
2022-09-24wifi: rtw89: set wifi_role of P2PPing-Ke Shih3-10/+25
Consider vif->p2p to set wifi_role to let firmware know current vif is running as GC or GO. And, allow GC to enter PS mode, but disallow to enter deep PS for now. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922010435.12167-4-pkshih@realtek.com
2022-09-24wifi: rtw89: send OFDM rate only in P2P modeDian-Syuan Yang4-14/+35
Check IEEE80211_TX_CTL_NO_CCK_RATE flag to avoid sending frames with CCK rates in 2GHz band. In TX flow, add IEEE80211_TX_CTL_NO_CCK_RATE flag to check and get its lowest rate without CCK rates if the TX type is mgmt frames or data frames. Besides, the decision of phy rate and retry rate in P2P mode are also be handled. In P2P GO mode, it should send beacon of no CCK rates in its frame rate. Therefore, We add a condition to decide which rate is added to beacon content. Moreover, we avoid setting a mask of rates to be used for rate control selection before and after connection in P2P mode. Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922010435.12167-3-pkshih@realtek.com
2022-09-24wifi: rtw89: support P2PPo Hao Huang3-1/+29
To support P2P in driver, we set P2P interface mode to the wiphy allocated for 802.11 PHY and add a change interface function to switch the interface type to P2P. Signed-off-by: Po Hao Huang <phhuang@realtek.com> Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922010435.12167-2-pkshih@realtek.com
2022-09-24wifi: rt2x00: correctly set BBP register 86 for MT7620Daniel Golle1-1/+4
Instead of 0 set the correct value for BBP register 86 for MT7620. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/257267247ee4fa7ebc6a5d0c4948b3f8119c0d77.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: set SoC wmac clock registerDaniel Golle1-0/+21
Instead of using the default value 33 (pci), set US_CYC_CNT init based on Programming guide: If available, set chipset bus clock with fallback to cpu clock/3. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/3e275d259f476f597dab91a9c395015ef3fe3284.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: set VGC gain for both chains of MT7620Daniel Golle1-1/+2
Set bbp66 for all chains of the MT7620. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/29e161397e5c9d9399da0fe87d44458aa2b90a78.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: set correct TX_SW_CFG1 MAC register for MT7620Daniel Golle1-1/+1
Set correct TX_SW_CFG1 MAC register as it is done also in v3 of the vendor driver[1]. [1]: https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531 Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/4be38975ce600a34249e12d09a3cb758c6e71071.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: fix HT20/HT40 bandwidth switch on MT7620Daniel Golle1-0/+8
Add missing configuration of the channel bandwidth filter to the channel setup function for MT7620. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/1664d89ba149f7b0bcec18b2a2abaedf49654507.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: move helper functions up in fileDaniel Golle1-20/+20
Move register access helper functions up to the head of the file so they can be used in all functions. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/c27baa8efd5c29e2bcb2432925d9cdc5c913a125.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add TX LOFT calibration for MT7620Tomislav Požega2-0/+912
Add TX LOFT calibration from mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/d9295a9138a1f552b648aacb84e1419d38f5c896.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: don't run Rt5592 IQ calibration on MT7620Daniel Golle1-1/+2
The function rt2800_iq_calibrate is intended for Rt5592 only. Don't call it for MT7620 which has it's own calibration functions. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/31a1c34ddbd296b82f38c18c9ae7339059215fdc.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add RXIQ calibration for MT7620Tomislav Požega1-0/+375
Add RXIQ calibration found in mtk driver. With old openwrt builds this gets us ~8Mbps more of RX bandwidth (test with iPA/eLNA layout). Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/033a39a697d51f6df258acea4c33608e0944fe4c.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add RXDCOC calibration for MT7620Tomislav Požega1-0/+60
Add RXDCOC calibration code from mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> [fixed typo reported by Serge Vasilugin <vasilugin@yandex.ru>] Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/850b30f652e88de30d79e968af4eb47aa5bc2511.1663445157.git.daniel@makrotopia.org
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.