| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The driver relies on the reset controller API to work, so add
RESET_CONTROLLER as one of its Kconfig dependencies.
Fixes: 576d196c522b ("media: sunxi: Add support for the A83T MIPI CSI-2 controller")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The driver relies on the reset controller API to work, so add
RESET_CONTROLLER as one of its Kconfig dependencies.
It also selects PHY_SUN6I_MIPI_DPHY, which depends on RESET_CONTROLLER.
Fixes: af54b4f4c17f ("media: sunxi: Add support for the A31 MIPI CSI-2 controller")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Return the value venus_hfi_create() directly instead of storing it in
another redundant variable.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The HDR10 PQ SEI should be set only when the codec is HEVC and
the profile is MAIN10, otherwise some artefacts could be produced
on the encoded bitstream.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add default value for CLL info when creating compound control.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Control MIN/MAX range defined as 0 to 1, as MIN value setting enabled
for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM.
error details: fail: v4l2-test-controls.cpp(516):
invalid maximum range check
Signed-off-by: Viswanath Boma <quic_vboma@quicinc.com>
Signed-off-by: Vikash Garodia <vgarodia@qti.qualcomm.com>
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
v4l2 compliance expecting settings for out buffer only and the same
values will be propagated to capture buffer setting by h/w encoder .
settings on cpature plane are optional , required only if
offline-encoding supports.
error details : fail: v4l2-test-formats.cpp(1350): !ret
Signed-off-by: Viswanath Boma <quic_vboma@quicinc.com>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
v4l2 compliance expecting support for vidioc_try_encoder_cmd .
error details : test VIDIOC_(TRY_)ENCODER_CMD: FAIL
Signed-off-by: Viswanath Boma <quic_vboma@quicinc.com>
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
V4l2 encoder compliance expecting End of stream Event registration
support for Encoder.
Signed-off-by: Viswanath Boma <quic_vboma@quicinc.com>
Signed-off-by: Vikash Garodia <vgarodia@qti.qualcomm.com>
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
V4l2 encoder compliance set-format test cases failing as Capture plane
width/height not aligned to OUT plane .
Signed-off-by: Viswanath Boma <quic_vboma@quicinc.com>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
V4l2 encoder compliance expecting minimum buffers support for
the application to allocate buffers as per the control support values.
Signed-off-by: Viswanath Boma <quic_vboma@quicinc.com>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
V4l2 encoder compliance expecting default values of colorimetry
for the control.
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Viswanath Boma <quic_vboma@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
HFI_VERSION_1XX uses HFI_BUFFER_OUTPUT not HFI_BUFFER_OUTPUT2 for decoder
buffers.
venus_helper_check_format() places a constraint on an output buffer to be
of type HFI_BUFFER_OUTPUT2. HFI_1XX uses HFI_BUFFER_OUTPUT though.
Switching to the logic used in venus_helper_get_out_fmts() first checking
for HFI_BUFFER_OUTPUT and then HFI_BUFFER_OUTPUT2 resolves on HFI_1XX.
db410c before:
root@linaro-alip:~# v4l2-ctl -d /dev/video0 --list-formats
ioctl: VIDIOC_ENUM_FMT
Type: Video Capture Multiplanar
[0]: 'MPG4' (MPEG-4 Part 2 ES, compressed)
[1]: 'H263' (H.263, compressed)
[2]: 'H264' (H.264, compressed)
[3]: 'VP80' (VP8, compressed)
root@linaro-alip:~# v4l2-ctl -d /dev/video1 --list-formats
ioctl: VIDIOC_ENUM_FMT
Type: Video Capture Multiplanar
db410c after:
root@linaro-alip:~# v4l2-ctl -d /dev/video0 --list-formats
ioctl: VIDIOC_ENUM_FMT
Type: Video Capture Multiplanar
[0]: 'MPG4' (MPEG-4 Part 2 ES, compressed)
[1]: 'H263' (H.263, compressed)
[2]: 'H264' (H.264, compressed)
[3]: 'VP80' (VP8, compressed)
root@linaro-alip:~# v4l2-ctl -d /dev/video1 --list-formats
ioctl: VIDIOC_ENUM_FMT
Type: Video Capture Multiplanar
[0]: 'NV12' (Y/CbCr 4:2:0)
Validated playback with ffplay on db410c with h264 and vp8 decoding.
Fixes: 9593126dae3e ("media: venus: Add a handling of QC08C compressed format")
Cc: stable@vger.kernel.org # v5.19
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Debugging the decoder on msm8916 I noticed the vdec probe was crashing if
the fmt pointer was NULL.
A similar fix from Colin Ian King found by Coverity was implemented for the
encoder. Implement the same fix on the decoder.
Fixes: 7472c1c69138 ("[media] media: venus: vdec: add video decoder files")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The PCI hybrid card NotOnlyTV LV3H has a built-in IR receiver connected
via I2C bus, currently not supported. This receiver is probably present
in more Geniatech cards. It has no capability for repeating when a key is
held down.
Add support for this built-in IR receiver. Use the existing Total Media
In Hand_02 remote keytable (Geniatech Mygica X8507) which matches exactly
the LV3H remote.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Marek Kidawski <mark_kiddy@wp.pl>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Release some resources in the error handling path of the probe and of
sun6i_mipi_csi2_resources_setup(), as already done in the remove
function.
Fixes: af54b4f4c17f ("media: sunxi: Add support for the A31 MIPI CSI-2 controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Release some resources in the error handling path of the probe and of
sun8i_a83t_mipi_csi2_resources_setup(), as already done in the remove
function.
Fixes: 576d196c522b ("media: sunxi: Add support for the A83T MIPI CSI-2 controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Fixes this Werror breakage:
drivers/staging/media/atomisp/pci/atomisp_ioctl.c: In function 'atomisp_streamon':
drivers/staging/media/atomisp/pci/atomisp_ioctl.c:1714:44: error: variable 'sink' set but not used [-Werror=unused-but-set-variable]
1714 | struct v4l2_mbus_framefmt *sink;
| ^~~~
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
After the conversion to json-schema, what was previously known as
`Documentation/devicetree/bindings/mfd/atmel-usart.txt`
has been moved to another bindings directory and renamed to
`Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml`.
Thus, make `MAINTAINERS` reflect this change.
Fixes: b9e947fbf008 ("dt-bindings: serial: atmel,at91-usart: convert to json-schema")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Link: https://lore.kernel.org/r/20220923113415.90236-1-sergiu.moga@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The camera_sensor_csi() is not used outside the module, hence make it
static. While at it, split it to _alloc() and _free() to clearly show
the idea behind the last parameter @flag that is passed to
gmin_csi_cfg().
Link: https://lore.kernel.org/r/20220730162027.1011-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The default qos value is not initialized when sriov is repeatedly enabled
and disabled. So add the vf qos value initialized in the sriov enable
process.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In order to test for the performance of aria-avx implementation, it needs
an async speed test.
So, it adds async speed tests to the tcrypt.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It renames aria to aria_generic and exports some functions such as
aria_set_key(), aria_encrypt(), and aria_decrypt() to be able to be
used by aria-avx implementation.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Switch to %zu instead of %d for printing size_t.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add missing __init/__exit annotations to init/exit funcs.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit 2d16803c562e ("crypto: blake2s - remove shash module") removes the
config CRYPTO_BLAKE2S.
Commit 3f342a23257d ("crypto: Kconfig - simplify hash entries") makes
various changes to the config descriptions as part of some consolidation
and clean-up, but among all those changes, it also accidently adds back
CRYPTO_BLAKE2S after its removal due to the original patch being based on
a state before the CRYPTO_BLAKE2S removal.
See Link for the author's confirmation of this happening accidently.
Fixes: 3f342a23257d ("crypto: Kconfig - simplify hash entries")
Link: https://lore.kernel.org/all/MW5PR84MB18424AB8C095BFC041AE33FDAB479@MW5PR84MB1842.NAMPRD84.PROD.OUTLOOK.COM/
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit 3f342a23257d ("crypto: Kconfig - simplify hash entries") makes
various changes to the config descriptions as part of some consolidation
and clean-up, but among all those changes, it also accidently renames
CRYPTO_SHA1_ARM64_CE to CRYPTO_SHA1_ARM64.
Revert this unintended config name change.
See Link for the author's confirmation of this happening accidently.
Fixes: 3f342a23257d ("crypto: Kconfig - simplify hash entries")
Link: https://lore.kernel.org/all/MW5PR84MB18424AB8C095BFC041AE33FDAB479@MW5PR84MB1842.NAMPRD84.PROD.OUTLOOK.COM/
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit 363a90c2d517 ("crypto: safexcel/aes - switch to
library version of key expansion routine") removed
CRYPTO_AES in the config. However, some portions of codes
still rely on generic AES cipher (e.g. refer to
safexcel_aead_gcm_cra_init(), safexcel_xcbcmac_cra_init()).
This causes transform allocation failure for those algos,
if CRYPTO_AES is not manually enabled.
To resolve that, we replace all existing AES cipher
dependent codes with their AES library counterpart.
Fixes: 363a90c2d517 ("crypto: safexcel/aes - switch to library version of key expansion routine")
Signed-off-by: Peter Harliman Liem <pliem@maxlinear.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
From commit d03c54419274 ("dma-mapping: disallow .map_sg
operations from returning zero on error"), dma_map_sg()
produces warning if size is 0. This results in visible
warnings if crypto length is zero.
To avoid that, we avoid calling dma_map_sg if size is zero.
Signed-off-by: Peter Harliman Liem <pliem@maxlinear.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
atomisp_source_pad_to_stream_id() returns ATOMISP_INPUT_STREAM_GENERAL
unconditionally now. Drop it and directly use ATOMISP_INPUT_STREAM_GENERAL
in its callers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The code checks a camera_caps struct in various places, but this always
points to the same const camera_caps struct.
Remove the checks, keeping the code paths which would be taken with
the fixed camera caps struct still in place and remove the camera_caps
struct itself.
Note this completely removes atomisp_pause_buffer_event() because that
only ever does something if camera_caps.sensors[0].is_slave is true and
that never is true.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Remove the unused atomisp_css_get_dis_statistics() function. This seems to
be a leftover variant / older version of atomisp_css_get_dis_stats() which
is actually used.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
atomisp_set_raw_buffer_bitmap() is only used in atomisp_cmd.c,
make it static. Unfortunately this still requires a forward
declaration (the function cannot be moved easily).
Still this will at least make it obvious to anyone reading the code
that the function is not used elsewhere.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Drop an unnecessary first_streamoff check from atomisp_streamoff(),
above the check there is a:
if (!first_streamoff)
goto stop_sensor;
Code block which will jump over the code with the test, so the test
is only executed when first_streamoff is true and therefor the test
is not necessary.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The __atomisp_reqbufs(), __atomisp_streamoff() are 1:1 wrappers for
the non __ prefixed functions now, drop these wrappers.
The atomisp_s_fmt_cap() wrapper is almost a 1:1 wrapper for
atomisp_set_fmt() adjust the latter to have the right function
prototype and drop the wrapper.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Set video_dev.lock to point to isp->mutex so that the core does
the locking surroundig ioctls for us and drop all the now no longer
necessary (and conflicting) locking from the ioctl handling code.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Now that __atomisp_streamoff() no longer drops isp->mutex to cancel
the watchdog timer, the streamoff_mutex is no longer necessary to
avoid multiple streamoffs racing with each other.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
During the first __atomisp_streamoff() call on an asd with only one pipe
streaming asd->streaming would get set twice:
asd->streaming = ATOMISP_DEVICE_STREAMING_STOPPING;
asd->streaming = ATOMISP_DEVICE_STREAMING_DISABLED;
Rework the code a bit so that it gets set to the correct value
right away instead of doing this in 2 steps.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Both callers of __atomisp_css_recover() check atomisp_streaming_count()
first, move the check into __atomisp_css_recover().
And __atomisp_css_recover() already calls lockdep_assert_held(&isp->mutex),
so drop that from atomisp_css_flush().
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The watchdog timer code to recover from the ISP getting stuck has several
major issues:
1. There is no way to do fault injection and normally the ISP does not
get stuck, so is it is impossible to test it.
2. It in essence just stops all streams, resets the ISP and then brings
everything back up. Userspace can easily do this itself by using a
timeout on dqbuf and then closing (which causes a poweroff) +
re-opening the device. Doing this in userspace (if it ever turns out
to be necessary) greatly simplifies the kernel code and in general
will be a more robust solution.
Even just a quick look at the code finds several more issues:
3. The need to sync-cancel the timers + work on streamoff requires
isp->mutex to be dropped halfway during the ioctl opening all sorts of
races.
4. The atomisp code supports setting up 2 pipelines, streaming from
two sensors at the same time. But there is only a single wdt_work
and stopping one of the 2 streams will cancel the timers + work,
stopping the wdt even though the other stream might still be running.
5. In case atomisp_css_flush() the sync cancel is done while keeping
isp->mutex locked, causing a deadlock when racing with wdt_work which
also takes isp->mutex.
6. Even though the watchdog is purely a software/driver thing which
just checkes that new frames keep coming in, there are 2 completely
different implementations for the ISP2400/ISP2401 which is not
necessary at all.
So all in all I believe that it is better to just remove the current
watchdog implementation. Fixing all the issues with the current
implementation will be so much work, that if it turns out that we do
need something like this then doing a clean re-implementation from
scratch will be better anyways.
wdt_work was also (ab)used to reset the ISP after the firmware signalled
an fw-assert error through the irq, add a new assert_recover_work to
replace this.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Several of the ioctl handlers all do the same checks
(isp->fatal_error and asd->streaming errors) add
an atomisp_pipe_check() helper for this.
Note this changes the vidioc_s_fmt_vid_cap and vidioc_s_input handlers
to now reject calls made while asd->streaming==STOPPING. This fixes
a possible race where one thread can make this ioctls while
vidioc_streamoff is running from another thread and it has
temporarily released isp->mutex to kill the watchdog timers / work.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
At probe time isp_subdev_init_entities() sets pipe->asd to a non NULL
value for all four (preview/vf/capture/capture_video) pipes by calling
atomisp_init_subdev_pipe() for all 4 pipes.
So it can never be NULL. Remove the redundant NULL checks.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
For reading / writing the asd->streaming enum the following rules
should be followed:
1. Writers of streaming must hold both isp->mutex and isp->lock.
2. Readers of streaming need to hold only one of the two locks.
Not all writers where properly taking both locks this fixes this.
In the case of the readers, many readers depend on their caller
to hold isp->mutex, add asserts for this
And in the case of atomisp_css_get_dis_stat() it is called with
isp->mutex held, so there is no need to take the spinlock just
for reading the streaming value.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The spin-lock embedded in struct atomisp_sub_device is not used anywhere,
remove it.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
There is no reason for atomisp to use a rt_mutex instead of a normal
mutex, so switch over to a normal mutex.
All the changes in this patch are just s/rt_mutex/mutex/.
This is a preparation patch for switching the ioctl locking over
to using the video_dev.lock member so that the v4l2-core takes
care of the locking.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The "height" and "width" values come from the user so the "height * width"
multiplication can overflow.
Link: https://lore.kernel.org/r/YxBBCRnm3mmvaiuR@kili
Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
v4l2_fh_open() can only fail with -ENOMEM and as a generic rule drivers
do not log their own errors for -ENOMEM since the kernel will already
have complained loudly about this before the -ENOMEM return.
Remove the unnecessary error logging from atomisp_open().
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
When atomisp_open() fails then it must call v4l2_fh_release() to undo
the results of v4l2_fh_open().
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
Paul Kocialkowski
ye xingchen
Stanimir Varbanov
Vikash Garodia
Viswanath Boma
Dikshita Agarwal
Bryan O'Donoghue
Daniel González Cabanelas
Christophe JAILLET
Mauro Carvalho Chehab
Sergiu Moga
Andy Shevchenko
Kai Ye
Liu Shixin
Taehee Yoo
Herbert Xu
Xiu Jianfeng
Lukas Bulwahn
Peter Harliman Liem
Hans de Goede
Dan Carpenter