| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
To convert SX9360 status register ["REG_STAT"], into a channel
index, we need to right shift by |stat_offset|, not left shift.
Also the PROXSTAT bit (3) is for channel 1 (PHM, Phase Measured), not (PHR,
Phase Reference, channel 0), so the offset is 2 instead of 3.
Fixes: 1cdb4c47f7f5 ("iio:proximity:sx9360: Add sx9360 support")
Signed-off-by: Jongpil Jung <jongpil19.jung@samsung.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20220122213444.745152-1-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Instead of custom data type re-use generic struct u32_fract.
No changes intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220126135353.24007-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Instead of custom data type re-use generic struct s16_fract.
No changes intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220126135353.24007-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Instead of custom data type re-use generic struct u16_fract.
No changes intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220126135353.24007-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Introduce a macro to produce data types like
struct TYPE_fract {
__TYPE numerator;
__TYPE denominator;
};
to be used in the code wherever it's needed.
In the following changes convert some users to it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220126135353.24007-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The QCom SPMI PMIC child nodes are defined to have a single address cell,
but the example has an erroneous size cell. Remove it.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220126231217.1633935-1-robh@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
unsigned int variable is always greater than or equal to zero. Make the
if condition simple.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Fixes: da35a7b526d9 ("iio: frequency: admv1013: add support for ADMV1013")
Link: https://lore.kernel.org/r/YdS3gJYtECMaDDjA@debian-BULLSEYE-live-builder-AMD64
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Pull scheduler fix from Borislav Petkov:
"Make sure the membarrier-rseq fence commands are part of the reported
set when querying membarrier(2) commands through MEMBARRIER_CMD_QUERY"
* tag 'sched_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/membarrier: Fix membarrier-rseq fence command missing from query bitmask
|
|
Pull x86 fixes from Borislav Petkov:
- Add another Intel CPU model to the list of CPUs supporting the
processor inventory unique number
- Allow writing to MCE thresholding sysfs files again - a previous
change had accidentally disabled it and no one noticed. Goes to show
how much is this stuff used
* tag 'x86_urgent_for_v5.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add Xeon Icelake-D to list of CPUs that support PPIN
x86/MCE/AMD: Allow thresholding interface updates after init
|
|
Merge misc fixes from Andrew Morton:
"12 patches.
Subsystems affected by this patch series: sysctl, binfmt, ia64, mm
(memory-failure, folios, kasan, and psi), selftests, and ocfs2"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
ocfs2: fix a deadlock when commit trans
jbd2: export jbd2_journal_[grab|put]_journal_head
psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n
psi: fix "no previous prototype" warnings when CONFIG_CGROUPS=n
mm, kasan: use compare-exchange operation to set KASAN page tag
kasan: test: fix compatibility with FORTIFY_SOURCE
tools/testing/scatterlist: add missing defines
mm: page->mapping folio->mapping should have the same offset
memory-failure: fetch compound_head after pgmap_pfn_valid()
ia64: make IA64_MCA_RECOVERY bool instead of tristate
binfmt_misc: fix crash when load/unload module
include/linux/sysctl.h: fix register_sysctl_mount_point() return type
|
|
Fixes dtbs_check warnings like:
dmac@ff240000: $nodename:0: 'dmac@ff240000' does not match '^dma-controller(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220129175429.298836-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
There are signal integrity issues running the eMMC at 200MHz on Puma
RK3399-Q7.
Similar to the work-around found for RK3399 Gru boards, lowering the
frequency to 100MHz made the eMMC much more stable, so let's lower the
frequency to 100MHz.
It might be possible to run at 150MHz as on RK3399 Gru boards but only
100MHz was extensively tested.
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20220119134948.1444965-1-quentin.schulz@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Quartz64 Model A uses a voltage divider to ensure ddr voltage is
within specification from the default regulator configuration.
Adjusting this voltage is detrimental, and currently causes the ddr
voltage to be about 0.8v.
Remove the min and max voltage setpoints for the ddr regulator.
Fixes: b33a22a1e7c4 ("arm64: dts: rockchip: add basic dts for Pine64 Quartz64-A")
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220128003809.3291407-2-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
'd' and 's' are initialised later with 'dest_w' and 'src_w', so we need not
initialise them before that.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
commit 6f1b228529ae introduces a regression which can deadlock as
follows:
Task1: Task2:
jbd2_journal_commit_transaction ocfs2_test_bg_bit_allocatable
spin_lock(&jh->b_state_lock) jbd_lock_bh_journal_head
__jbd2_journal_remove_checkpoint spin_lock(&jh->b_state_lock)
jbd2_journal_put_journal_head
jbd_lock_bh_journal_head
Task1 and Task2 lock bh->b_state and jh->b_state_lock in different
order, which finally result in a deadlock.
So use jbd2_journal_[grab|put]_journal_head instead in
ocfs2_test_bg_bit_allocatable() to fix it.
Link: https://lkml.kernel.org/r/20220121071205.100648-3-joseph.qi@linux.alibaba.com
Fixes: 6f1b228529ae ("ocfs2: fix race between searching chunks and release journal_head from buffer_head")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com>
Tested-by: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com>
Reported-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "ocfs2: fix a deadlock case".
This fixes a deadlock case in ocfs2. We firstly export jbd2 symbols
jbd2_journal_[grab|put]_journal_head as preparation and later use them
in ocfs2 insread of jbd_[lock|unlock]_bh_journal_head to fix the
deadlock.
This patch (of 2):
This exports symbols jbd2_journal_[grab|put]_journal_head, which will be
used outside modules, e.g. ocfs2.
Link: https://lkml.kernel.org/r/20220121071205.100648-2-joseph.qi@linux.alibaba.com
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com>
Cc: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When CONFIG_PROC_FS is disabled psi code generates the following
warnings:
kernel/sched/psi.c:1364:30: warning: 'psi_cpu_proc_ops' defined but not used [-Wunused-const-variable=]
1364 | static const struct proc_ops psi_cpu_proc_ops = {
| ^~~~~~~~~~~~~~~~
kernel/sched/psi.c:1355:30: warning: 'psi_memory_proc_ops' defined but not used [-Wunused-const-variable=]
1355 | static const struct proc_ops psi_memory_proc_ops = {
| ^~~~~~~~~~~~~~~~~~~
kernel/sched/psi.c:1346:30: warning: 'psi_io_proc_ops' defined but not used [-Wunused-const-variable=]
1346 | static const struct proc_ops psi_io_proc_ops = {
| ^~~~~~~~~~~~~~~
Make definitions of these structures and related functions conditional
on CONFIG_PROC_FS config.
Link: https://lkml.kernel.org/r/20220119223940.787748-3-surenb@google.com
Fixes: 0e94682b73bf ("psi: introduce psi monitor")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When CONFIG_CGROUPS is disabled psi code generates the following
warnings:
kernel/sched/psi.c:1112:21: warning: no previous prototype for 'psi_trigger_create' [-Wmissing-prototypes]
1112 | struct psi_trigger *psi_trigger_create(struct psi_group *group,
| ^~~~~~~~~~~~~~~~~~
kernel/sched/psi.c:1182:6: warning: no previous prototype for 'psi_trigger_destroy' [-Wmissing-prototypes]
1182 | void psi_trigger_destroy(struct psi_trigger *t)
| ^~~~~~~~~~~~~~~~~~~
kernel/sched/psi.c:1249:10: warning: no previous prototype for 'psi_trigger_poll' [-Wmissing-prototypes]
1249 | __poll_t psi_trigger_poll(void **trigger_ptr,
| ^~~~~~~~~~~~~~~~
Change the declarations of these functions in the header to provide the
prototypes even when they are unused.
Link: https://lkml.kernel.org/r/20220119223940.787748-2-surenb@google.com
Fixes: 0e94682b73bf ("psi: introduce psi monitor")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It has been reported that the tag setting operation on newly-allocated
pages can cause the page flags to be corrupted when performed
concurrently with other flag updates as a result of the use of
non-atomic operations.
Fix the problem by using a compare-exchange loop to update the tag.
Link: https://lkml.kernel.org/r/20220120020148.1632253-1-pcc@google.com
Link: https://linux-review.googlesource.com/id/I456b24a2b9067d93968d43b4bb3351c0cec63101
Fixes: 2813b9c02962 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With CONFIG_FORTIFY_SOURCE enabled, string functions will also perform
dynamic checks using __builtin_object_size(ptr), which when failed will
panic the kernel.
Because the KASAN test deliberately performs out-of-bounds operations,
the kernel panics with FORTIFY_SOURCE, for example:
| kernel BUG at lib/string_helpers.c:910!
| invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
| CPU: 1 PID: 137 Comm: kunit_try_catch Tainted: G B 5.16.0-rc3+ #3
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
| RIP: 0010:fortify_panic+0x19/0x1b
| ...
| Call Trace:
| kmalloc_oob_in_memset.cold+0x16/0x16
| ...
Fix it by also hiding `ptr` from the optimizer, which will ensure that
__builtin_object_size() does not return a valid size, preventing
fortified string functions from panicking.
Link: https://lkml.kernel.org/r/20220124160744.1244685-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Nico Pache <npache@redhat.com>
Reviewed-by: Nico Pache <npache@redhat.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The cited commits replaced preemptible with pagefault_disabled and
flush_kernel_dcache_page with flush_dcache_page respectively, hence need
to update the corresponding defines in the test.
scatterlist.c: In function ‘sg_miter_stop’:
scatterlist.c:919:4: warning: implicit declaration of function ‘flush_dcache_page’ [-Wimplicit-function-declaration]
flush_dcache_page(miter->page);
^~~~~~~~~~~~~~~~~
In file included from linux/scatterlist.h:8:0,
from scatterlist.c:9:
scatterlist.c:922:18: warning: implicit declaration of function ‘pagefault_disabled’ [-Wimplicit-function-declaration]
WARN_ON_ONCE(!pagefault_disabled());
^
linux/mm.h:23:25: note: in definition of macro ‘WARN_ON_ONCE’
int __ret_warn_on = !!(condition); \
^~~~~~~~~
Link: https://lkml.kernel.org/r/20220118082105.1737320-1-maorg@nvidia.com
Fixes: 723aca208516 ("mm/scatterlist: replace the !preemptible warning in sg_miter_stop()")
Fixes: 0e84f5dbf8d6 ("scatterlist: replace flush_kernel_dcache_page with flush_dcache_page")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As with the other members of folio, the offset of page->mapping and
folio->mapping must be the same. The compile-time check was
inadvertently removed during development. Add it back.
[willy@infradead.org: changelog redo]
Link: https://lkml.kernel.org/r/20220104011734.21714-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
memory_failure_dev_pagemap() at the moment assumes base pages (e.g.
dax_lock_page()). For devmap with compound pages fetch the
compound_head in case a tail page memory failure is being handled.
Currently this is a nop, but in the advent of compound pages in
dev_pagemap it allows memory_failure_dev_pagemap() to keep working.
Without this fix memory-failure handling (i.e. MCEs on pmem) with
device-dax configured namespaces will regress (and crash).
Link: https://lkml.kernel.org/r/20211202204422.26777-2-joao.m.martins@oracle.com
Reported-by: Jane Chu <jane.chu@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In linux-next, IA64_MCA_RECOVERY uses the (new) function
make_task_dead(), which is not exported for use by modules. Instead of
exporting it for one user, convert IA64_MCA_RECOVERY to be a bool
Kconfig symbol.
In a config file from "kernel test robot <lkp@intel.com>" for a
different problem, this linker error was exposed when
CONFIG_IA64_MCA_RECOVERY=m.
Fixes this build error:
ERROR: modpost: "make_task_dead" [arch/ia64/kernel/mca_recovery.ko] undefined!
Link: https://lkml.kernel.org/r/20220124213129.29306-1-rdunlap@infradead.org
Fixes: 0e25498f8cd4 ("exit: Add and use make_task_dead.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We should unregister the table upon module unload otherwise something
horrible will happen when we load binfmt_misc module again. Also note
that we should keep value returned by register_sysctl_mount_point() and
release it later, otherwise it will leak.
Also, per Christian's comment, to fully restore the old behavior that
won't break userspace the check(binfmt_misc_header) should be
eliminated.
To reproduce:
modprobe binfmt_misc
modprobe -r binfmt_misc
modprobe binfmt_misc
modprobe -r binfmt_misc
modprobe binfmt_misc
resulting in
modprobe: can't load module binfmt_misc (kernel/fs/binfmt_misc.ko): Cannot allocate memory
and an unhappy kernel:
binfmt_misc: Failed to create fs/binfmt_misc sysctl mount point
binfmt_misc: Failed to create fs/binfmt_misc sysctl mount point
BUG: unable to handle page fault for address: fffffbfff8004802
Call Trace:
init_misc_binfmt+0x2d/0x1000 [binfmt_misc]
Link: https://lkml.kernel.org/r/20220124181812.1869535-2-ztong0001@gmail.com
Fixes: 3ba442d5331f ("fs: move binfmt_misc sysctl to its own file")
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Co-developed-by: Christian Brauner<brauner@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The CONFIG_SYSCTL=n stub returns the wrong type.
Fixes: ee9efac48a082 ("sysctl: add helper to register a sysctl mount point")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add driver for Sunplus SP7021 SoC.
Signed-off-by: Wells Lu <wellslutw@gmail.com>
Link: https://lore.kernel.org/r/1642344734-27229-3-git-send-email-wellslutw@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add dt-bindings header files and documentation for Sunplus SP7021 SoC.
Signed-off-by: Wells Lu <wellslutw@gmail.com>
Link: https://lore.kernel.org/r/1642344734-27229-2-git-send-email-wellslutw@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add new pinctrl driver for Amlogic's Meson-S4 SoC which share the
same register layout as the previous Meson-A1.
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Link: https://lore.kernel.org/r/20220113031044.2665-4-qianggui.song@amlogic.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add a new dt-binding header file which documents the detail pin names.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Link: https://lore.kernel.org/r/20220113031044.2665-3-qianggui.song@amlogic.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add new compatible for Amlogic's Meson-S4 pin controller
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Link: https://lore.kernel.org/r/20220113031044.2665-2-qianggui.song@amlogic.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When PINCTRL_BCM63XX is selected,
and REGMAP is not selected,
Kbuild gives the following warning:
WARNING: unmet direct dependencies detected for GPIO_REGMAP
Depends on [n]: GPIOLIB [=y] && REGMAP [=n]
Selected by [y]:
- PINCTRL_BCM63XX [=y] && PINCTRL [=y]
This is because PINCTRL_BCM63XX
selects GPIO_REGMAP without selecting or depending on
REGMAP, despite GPIO_REGMAP depending on REGMAP.
This unmet dependency bug was detected by Kismet,
a static analysis tool for Kconfig. Please advise
if this is not the appropriate solution.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Link: https://lore.kernel.org/r/20220117062557.89568-1-julianbraha@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
After commit 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio
hogs") a few error paths would not unwind properly the registration of
gpio ranges. Correct that by assigning a single error label and goto it
whenever we encounter a fatal error.
Fixes: 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220127215033.267227-1-f.fainelli@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
intel-pinctrl for v5.17-4
* Couple of fixes on how Intel driver handles an interrupt
* Revert pin renaming change in ZynqMQ as it appears to be part of
the Device Tree bindings
* Fix ordering of the files in the Makefile
The following is an automated git shortlog grouped by driver:
intel:
- Fix a glitch when updating IRQ flags on a preconfigured line
- fix unexpected interrupt
Place correctly CONFIG_PINCTRL_ST in the Makefile:
- Place correctly CONFIG_PINCTRL_ST in the Makefile
zynqmp:
- Revert "Unify pin naming"
|
|
The driver overrides error codes returned by platform_get_irq_optional()
to -EINVAL for some strange reason, so if it returns -EPROBE_DEFER, the
driver will fail the probe permanently instead of the deferred probing.
Switch to propagating the proper error codes to platform driver code
upwards.
[ bp: Massage commit message. ]
Fixes: 0d4429301c4a ("EDAC: Add APM X-Gene SoC EDAC driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220124185503.6720-3-s.shtylyov@omp.ru
|
|
coccinelle report:
./drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c:
479:9-17: WARNING: use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Use swap() in order to make code cleaner. Issue found by coccinelle.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Do a sanity check on pixclock value to avoid divide by zero.
If the pixclock value is zero, the cirrusfb driver will round up
pixclock to get the derived frequency as close to maxclock as
possible.
Syzkaller reported a divide error in cirrusfb_check_pixclock.
divide error: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 14938 Comm: cirrusfb_test Not tainted 5.15.0-rc6 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2
RIP: 0010:cirrusfb_check_var+0x6f1/0x1260
Call Trace:
fb_set_var+0x398/0xf90
do_fb_ioctl+0x4b8/0x6f0
fb_ioctl+0xeb/0x130
__x64_sys_ioctl+0x19d/0x220
do_syscall_64+0x3a/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Variable Ftarget is being initialized with a value that is never read,
it is being re-assigned a different value a little later on. The
assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
There are a couple of statements where local variables are being assigned
values that are never read because the function returns immediately after
the assignment. Clean up the code by removing them.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
Jongpil Jung
Andy Shevchenko
Rob Herring
Muhammad Usama Anjum
Linus Torvalds
Krzysztof Kozlowski
Jakob Unterwurzacher
Peter Geis
Kuniyuki Iwashima
Joseph Qi
Suren Baghdasaryan
Peter Collingbourne
Marco Elver
Maor Gottlieb
Wei Yang
Joao Martins
Randy Dunlap
Tong Zhang
Andrew Morton
Wells Lu
Qianggui Song
Julian Braha
Florian Fainelli
Linus Walleij
Sergey Shtylyov
Yang Guang
Changcheng Deng
George Kennedy
Cai Huoqing
Colin Ian King
Colin Ian King