aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-01-28ASoC: SOF: Intel: cnl: Use pm_gate->hdr.cmd in cnl_compact_ipc_compress()Peter Ujfalusi1-4/+2
Instead of first checking the msg->header (which is the hdr.cmd), use directly the cmd from the message itself. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220128133620.9411-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28ASoC: amd: renoir: Add check for acp configuration flagsAjit Kumar Pandey3-1/+10
We have SOF and generic ACP support enabled for Renoir platforms on some machines. Since we have same PCI id used for probing, add check for machine configuration flag to avoid conflict with newer pci drivers. Such machine flag has been initialized via dmi match on few Chrome machines. If no flag is specified probe and register older platform device. Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Link: https://lore.kernel.org/r/20220117115854.455995-7-AjitKumar.Pandey@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28ASoC: amd: acp: acp-legacy: Add DMIC dai link support for RenoirAjit Kumar Pandey2-2/+23
Add DMIC related dai link for pdm-dmic dai on Renoir platform with generic dmic codec dai. Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Link: https://lore.kernel.org/r/20220117115854.455995-6-AjitKumar.Pandey@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28ASoC: amd: acp: Add ACP init()/deinit() callback for Renoir.Ajit Kumar Pandey2-0/+153
ACP hardware has PGFSM control registers that can be configured to power On/Off the ACP IP block. Add acp init()/de_init() callbacks in renoir platform driver probe()/remove() respectively to power on and off ACP IP block on ACP3X device. Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Link: https://lore.kernel.org/r/20220117115854.455995-5-AjitKumar.Pandey@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28ASoC: amd: acp: Add generic PCI driver module for ACP deviceAjit Kumar Pandey5-0/+183
Audio Co-processor or ACP IP block on AMD's SOC is connected via PCI bus interface, hence needs to be register as a PCI device. We have same PCI device ID across multiple SOC's but with different revision id for PCI hw. Add a generic PCI driver module for ACP that registers ACP as a PCI device and also register a platform device based on pci revision id. Any SOC's specific configuration for ACP block will be done in platform driver probe. We have added an initial support for ACP revision id 3 or ACP3X device. Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Link: https://lore.kernel.org/r/20220117115854.455995-4-AjitKumar.Pandey@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28ASoC: amd: acp: Add PDM controller based dmic dai for RenoirAjit Kumar Pandey2-0/+14
Renoir ACP IP has a PDM controller block. Add DMIC dai instance in dai_driver struct to enable dmic capture support on Renoir platform. Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Link: https://lore.kernel.org/r/20220117115854.455995-3-AjitKumar.Pandey@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28ASoC: amd: acp: Add generic support for PDM controller on ACPAjit Kumar Pandey5-1/+226
Add driver module for PDM controller on ACP IP block. Expose dai ops to configure ACP_WOV_PDM_BLOCK registers on ACP. Such dai ops will be used by platform specific driver module to register dmic related dai with ASoC. Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Link: https://lore.kernel.org/r/20220117115854.455995-2-AjitKumar.Pandey@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28ASoC: rk3399_gru_sound: Wire up DP jack detectionBrian Norris1-0/+20
Now that the cdn-dp driver supports plug-change callbacks, let's wire it up. Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20220114150129.v2.3.I3c79b1466c14b02980071221e5b99283cd26ec77@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28drm/rockchip: cdn-dp: Support HDMI codec plug-change callbackBrian Norris2-0/+32
Some audio servers like to monitor a jack device (perhaps combined with EDID, for audio-presence info) to determine DP/HDMI audio presence. Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20220114150129.v2.2.I20d754a1228aa5c51a18c8eb15a2c60dec25b639@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28ASoC: rt5682: Fix deadlock on resumePeter Ujfalusi3-29/+12
On resume from suspend the following chain of events can happen: A rt5682_resume() -> mod_delayed_work() for jack_detect_work B DAPM sequence starts ( DAPM is locked now) A1. rt5682_jack_detect_handler() scheduled - Takes both jdet_mutex and calibrate_mutex - Calls in to rt5682_headset_detect() which tries to take DAPM lock, it starts to wait for it as B path took it already. B1. DAPM sequence reaches the "HP Amp", rt5682_hp_event() tries to take the jdet_mutex, but it is locked in A1, so it waits. Deadlock. To solve the deadlock, drop the jdet_mutex, use the jack_detect_work to do the jack removal handling, move the dapm lock up one level to protect the most of the rt5682_jack_detect_handler(), but not the jack reporting as it might trigger a DAPM sequence. The rt5682_headset_detect() can be changed to static as well. Fixes: 8deb34a90f063 ("ASoC: rt5682: fix the wrong jack type detected") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20220126100325.16513-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28ASoC: hdmi-codec: Fix OOB memory accessesDmitry Osipenko2-2/+4
Correct size of iec_status array by changing it to the size of status array of the struct snd_aes_iec958. This fixes out-of-bounds slab read accesses made by memcpy() of the hdmi-codec driver. This problem is reported by KASAN. Cc: stable@vger.kernel.org Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20220112195039.1329-1-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28ASoC: soc-pcm: Move debugfs removal out of spinlockTakashi Iwai1-3/+9
The recent fix for DPCM locking also covered the loop in dpcm_be_disconnect() with the FE stream lock. This caused an unexpected side effect, thought: calling debugfs_remove_recursive() in the spinlock may lead to lockdep splats as the code there assumes the SOFTIRQ-safe context. For avoiding the problem, this patch changes the disconnection procedure to two phases: at first, the matching entries are removed from the linked list, then the resources are freed outside the lock. Fixes: b7898396f4bb ("ASoC: soc-pcm: Fix and cleanup DPCM locking") Reported-and-tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20220119155249.26754-3-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28ASoC: soc-pcm: Fix DPCM lockdep warning due to nested stream locksTakashi Iwai3-3/+31
The recent change for DPCM locking caused spurious lockdep warnings. Actually the warnings are false-positive, as those are triggered due to the nested stream locks for FE and BE. Since both locks belong to the same lock class, lockdep sees it as if a deadlock. For fixing this, we need to take PCM stream locks for BE with the nested lock primitives. Since currently snd_pcm_stream_lock*() helper assumes only the top-level single locking, a new helper function snd_pcm_stream_lock_irqsave_nested() is defined for a single-depth nested lock, which is now used in the BE DAI trigger that is always performed inside a FE stream lock. Fixes: b2ae80663008 ("ASoC: soc-pcm: serialize BE triggers") Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com> Reported-and-tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/73018f3c-9769-72ea-0325-b3f8e2381e30@redhat.com Link: https://lore.kernel.org/alsa-devel/9a0abddd-49e9-872d-2f00-a1697340f786@samsung.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20220119155249.26754-2-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28rtw89: use pci_read/write_config instead of dbi read/writeChin-Yen Lee1-75/+53
In the past we use dbi function of wifi mac to read/write pci config space, but the function will be remove in new chip. So use kernel api pci_read/write_config_byte instead. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220121075555.12457-2-pkshih@realtek.com
2022-01-28rtw89: refine DIG feature to support 160M and CCK PDJohnson Lin5-7/+44
DIG, which is short for dynamic initial gain, is used to adjust gain to get good RX performance. CCK PD feature, a mechanism that adjusts 802.11b CCK packet detection(PD) power threshold based on environment noisy level in order to avoid false alarm. Also, refine related variable naming. Signed-off-by: Johnson Lin <johnson.lin@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220121075555.12457-1-pkshih@realtek.com
2022-01-28rtw89: fix maybe uninitialized `qempty` variableÍñigo Huguet1-0/+1
Call to dle_dfi_qempty might fail, leaving qempty.qempty untouched, which is latter used to control the for loop. If that happens, it's not initialized anywhere. Initialize it so the loop doesn't iterate unless it's modified by the call to dle_dfi_qempty. Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220113094253.73370-1-ihuguet@redhat.com
2022-01-28rtw89: include subband type in channel paramsZong-Zhe Yang2-15/+20
Make stuffs related to channel be collected in channel_params, and encapsulate the corresponding decision in get_channel_params(). Then, functions that takes channel_params can also notice subband type. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220113011042.6705-2-pkshih@realtek.com
2022-01-28rtw89: handle 6G band if supported by a chipsetZong-Zhe Yang3-57/+179
For next chipset which can support 6G band, we add the handling of ieee80211_supported_band for 6G band in advance. And a bitmap, support_bands, is added to rtw89_chip_info to declare which NL80211_BAND_* are supported. With the chipset's declaration, we register the corresponding instances of ieee80211_supported_band with wiphy. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220113011042.6705-1-pkshih@realtek.com
2022-01-28Tegra234 APE supportMark Brown15-5/+169
Merge series from Sameer Pujar <spujar@nvidia.com>: This adds APE support on Tegra234 and enables sound card on Jetson AGX Orin platform.
2022-01-28rtw89: separate {init,deinit}_addr_cam functionsPing-Ke Shih3-14/+26
Each stations connected to AP needs to set an address CAM, so don't combine address and BSSID CAM. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220107034239.22002-13-pkshih@realtek.com
2022-01-28rtw89: set mac_id and port ID to TXWDPing-Ke Shih3-2/+27
One mac_id is corresponding to one connected station, and port ID is a ID of virtual interfaces. With proper mac_id and port ID, firmware and hardware can handle a packet with correct context. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220107034239.22002-12-pkshih@realtek.com
2022-01-28rtw89: send broadcast/multicast packets via HIQ if STAs are in sleep modePing-Ke Shih2-3/+6
If a packet we are going to send is broadcast/multicast and certain STAs are in sleep mode, a flag IEEE80211_TX_CTL_SEND_AFTER_DTIM is added to txinfo. Then, this kind of packets must be sent via HIQ instead of regular AC queues, because they should be sent right after beacon. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220107034239.22002-11-pkshih@realtek.com
2022-01-28rtw89: configure mac port HIQ registersPing-Ke Shih2-2/+46
HIQ is short for high queue that is used to send broadcast/multicast packets right after TBTT in AP mode. Two registers, DTIM and window size, are configured accordingly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220107034239.22002-10-pkshih@realtek.com
2022-01-28rtw89: rename vif_maintain to role_maintainPing-Ke Shih4-17/+17
The H2C_FUNC_MAC_FWROLE_MAINTAIN also maintains the roles of all connected stations; not just the role of VIF. So, I correct the name, but don't change the logic at all. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220107034239.22002-9-pkshih@realtek.com
2022-01-28rtw89: extend firmware commands on states of sta_assoc and sta_disconnectPing-Ke Shih4-14/+32
The h2c_join firmware command is used to indicate a station is connected, and the assoc_cmac_tbl firmware command is used to set CMAC table corresponding to a mac_id. Both commands must work in both station and AP modes. Use the mac_id of rtw89_sta naturally and intuitively. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220107034239.22002-8-pkshih@realtek.com
2022-01-28rtw89: allocate mac_id for each station in AP modePing-Ke Shih1-0/+5
In station mode, mac_id of station is the same as rtwvif's one. In AP mode, each station uses individual mac_id. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220107034239.22002-7-pkshih@realtek.com
2022-01-28rtw89: implement mac80211_ops::set_tim to indicate STA to receive packetsPing-Ke Shih3-0/+35
Update beacon content if TIM bitmap maintained by mac80211 is changed. Since .set_tim must be atomic but driver uses mutex lock, we add a work. Otherwise, kernel says "sched: RT throttling activated" and lock down. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220107034239.22002-6-pkshih@realtek.com
2022-01-28rtw89: add C2H handle of BCN_CNTPing-Ke Shih2-0/+7
This C2H notify driver the beacon count we send out. We don't handle the content for now, so add a dummy handler to avoid messages, like rtw89_pci 0000:03:00.0: c2h class 0 func 3 not support C2H: 00000000: 01 03 01 3f 0f 00 00 00 80 0a 00 00 00 00 a0 rtw89_pci 0000:03:00.0: c2h class 0 func 3 not support C2H: 00000000: 01 03 01 40 0f 00 00 00 00 03 20 00 00 00 a5 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220107034239.22002-5-pkshih@realtek.com
2022-01-28rtw89: download beacon content to firmwarePing-Ke Shih3-0/+159
Firmware sends out beacon content generated by mac80211, and then stations can receive beacon and work with this AP properly. Also, we download beacon content again if TIM is changed. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220107034239.22002-4-pkshih@realtek.com
2022-01-28rtw89: use hardware SSN to TX management framePing-Ke Shih3-1/+11
Since firmware transmits beacon by hardware SSN, driver does it with the same setting, then packets in the air have continual sequence number. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220107034239.22002-3-pkshih@realtek.com
2022-01-28rtw89: configure rx_filter according to FIF_PROBE_REQPing-Ke Shih1-1/+10
With this patch, we can receive probe_req and reply probe_resp, and STA can find us. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220107034239.22002-2-pkshih@realtek.com
2022-01-28rtw89: correct use of BA CAMPing-Ke Shih5-8/+107
BA CAM is used to ACK peer's packets, so it must be established when IEEE80211_AMPDU_RX_START, and free it by IEEE80211_AMPDU_RX_STOP. The hardware can support two static BA CAM entries, so I implement a bitmap and a struct to record which entry is used and its corresponding tid. Also, the hardware can learn and create dynamic BA CAM entries automatically if received packets don't match static BA CAM. That means it can still work if we don't use H2C to set static BA CAM. An exception is tid=0 should be always allocated in static BA CAM, so an existing static BA CAM will be replaced if it is full and peer is going to establish a BA with tid=0. The new firmware use new format of this H2C, so I upgrade it as well. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220104012052.6911-1-pkshih@realtek.com
2022-01-28rtw89: encapsulate RX handlers to single functionPing-Ke Shih1-15/+17
We have three points to receive packets to mac80211 with three different kinds of status. Many handlers are common and can be shared, so I move them together, and I don't change the logic at all. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220103013623.17052-3-pkshih@realtek.com
2022-01-28rtw89: Add RX counters of VHT MCS-10/11 to debugfsPing-Ke Shih1-8/+14
8852AE can receive packets with VHT MCS10/11, and we want to know we have received this kind of packets, so show the counter of VHT MCS10/11 in debugfs, like: TP TX: 1 [1] Mbps (lv: 1), RX: 420 [422] Mbps (lv: 4) Beacon: 19 Avg packet length: TX=102, RX=3081 RX count: Legacy: [0, 0, 0, 0] OFDM: [0, 0, 0, 0, 0, 0, 0, 0] HT 0: [0, 0, 0, 0, 0, 0, 0, 0] HT 1: [0, 0, 0, 0, 0, 0, 0, 0] VHT 1SS: [0, 0, 0, 0, 0, 0, 0, 0, 0, 0][0, 0] VHT 2SS: [0, 0, 0, 0, 0, 0, 0, 4, 624, 4818][29913, 556] HE 1SS: [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0] HE 2ss: [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0] TX rate [0]: VHT 2SS MCS-9 SGI (hw_rate=0x119) ==> agg_wait=1 (3500) RX rate [0]: VHT 2SS MCS-10 SGI (hw_rate=0x11a) RSSI: -30 dBm (raw=161, prev=165) Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220103013623.17052-2-pkshih@realtek.com
2022-01-28rtw89: remove duplicate definition of hardware port numberPing-Ke Shih4-13/+12
RTW89_MAX_HW_PORT_NUM and RTW89_PORT_NUM refer to the same thing, so remove the one of them. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211227083134.35248-1-pkshih@realtek.com
2022-01-28rtw89: extract modules by chipsetZong-Zhe Yang13-60/+131
We are planning to support more chipsets, e.g. 8852C. Before that, we consider architecutre to handle multiple kinds of chipsets. Obviosuly, based on original design, rtw89_core module will have large size even if there is only one chipset under running. It is because all chipset related things are put in rtw89_core now. To reduce such overhead, we extract modules of rtw89 and adjust dependencies between modules. The following assumes that 8852AE, 8852AU, and 8852CE are all supported, we describe the difference before and after extraction. [Before extraction] ------------- |------------------------------------ | rtw89_usb | V ------------- --------------------------------------- ------------- | rtw89_core (including 8852A, 8852C) | <--- | rtw89_pci | --------------------------------------- ------------- The data of 8852A and 8852C are built in rtw89_core. And rtw89_pci is the entry of 8852AE and 8852CE. And rtw89_usb is the entry of 8852AU. [After extraction] ------------- ---------------- |----------- | rtw89_usb | <-------- | rtw89_8852au | | ------------- ---------------- V --------------- | -------------- | | <--------------- | rtw89_core | <--- | rtw89_8852a | -------------- | | <--------------- ^ ^ --------------- | | | ------------- ---------------- | | | | <-------- | rtw89_8852ae | | |----------- | rtw89_pci | ---------------- | | | <----------------- | ------------- | | --------------- ---------------- |--------------- | rtw89_8852c | <------ | rtw89_8852ce | --------------- ---------------- The data of 8852A/8852C is extracted to rtw89_8852a/rtw89_8852c. And rtw89_pci/rtw89_usb handles only common flow of pci/usb bus. Finally, 8852AE, 8852AU, and 8852CE have individual entry modules, i.e. rtw89_8852ae, rtw89_8852au, and rtw89_8852ce correspondingly. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211221025828.25092-1-pkshih@realtek.com
2022-01-28Merge tag 'fsnotify_for_v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds8-26/+59
Pull fsnotify fixes from Jan Kara: "Fixes for userspace breakage caused by fsnotify changes ~3 years ago and one fanotify cleanup" * tag 'fsnotify_for_v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: fix fsnotify hooks in pseudo filesystems fsnotify: invalidate dcache before IN_DELETE event fanotify: remove variable set but not used
2022-01-28RDMA/siw: Fix refcounting leak in siw_create_qp()Dan Carpenter1-1/+2
The atomic_inc() needs to be paired with an atomic_dec() on the error path. Fixes: 514aee660df4 ("RDMA: Globally allocate and release QP memory") Link: https://lore.kernel.org/r/20220118091104.GA11671@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-01-28RDMA/core: Set MR type in ib_reg_user_mrMaor Gottlieb1-0/+1
Add missing assignment of MR type to IB_MR_TYPE_USER. Fixes: 33006bd4f37f ("IB/core: Introduce ib_reg_user_mr") Link: https://lore.kernel.org/r/be2e91bcd6e52dc36be289ae92f30d3a5cc6dcb1.1642491047.git.leonro@nvidia.com Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-01-28RDMA/ucma: Protect mc during concurrent multicast leavesLeon Romanovsky1-11/+23
Partially revert the commit mentioned in the Fixes line to make sure that allocation and erasing multicast struct are locked. BUG: KASAN: use-after-free in ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] BUG: KASAN: use-after-free in ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 Read of size 8 at addr ffff88801bb74b00 by task syz-executor.1/25529 CPU: 0 PID: 25529 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 ucma_destroy_id+0x1e6/0x280 drivers/infiniband/core/ucma.c:614 ucma_write+0x25c/0x350 drivers/infiniband/core/ucma.c:1732 vfs_write+0x28e/0xae0 fs/read_write.c:588 ksys_write+0x1ee/0x250 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Currently the xarray search can touch a concurrently freeing mc as the xa_for_each() is not surrounded by any lock. Rather than hold the lock for a full scan hold it only for the effected items, which is usually an empty list. Fixes: 95fe51096b7a ("RDMA/ucma: Remove mc_list and rely on xarray") Link: https://lore.kernel.org/r/1cda5fabb1081e8d16e39a48d3a4f8160cea88b8.1642491047.git.leonro@nvidia.com Reported-by: syzbot+e3f96c43d19782dd14a7@syzkaller.appspotmail.com Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-01-28RDMA/cma: Use correct address when leaving multicast groupMaor Gottlieb1-10/+12
In RoCE we should use cma_iboe_set_mgid() and not cma_set_mgid to generate the mgid, otherwise we will generate an IGMP for an incorrect address. Fixes: b5de0c60cc30 ("RDMA/cma: Fix use after free race in roce multicast join") Link: https://lore.kernel.org/r/913bc6783fd7a95fe71ad9454e01653ee6fb4a9a.1642491047.git.leonro@nvidia.com Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-01-28Merge tag 'fs_for_v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds2-6/+5
Pull udf and quota fixes from Jan Kara: "Fixes for crashes in UDF when inode expansion fails and one quota cleanup" * tag 'fs_for_v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: cleanup double word in comment udf: Restore i_lenAlloc when inode expansion fails udf: Fix NULL ptr deref when converting from inline format
2022-01-28ntb: intel: fix port config status offset for SPRDave Jiang2-1/+32
The field offset for port configuration status on SPR has been changed to bit 14 from ICX where it resides at bit 12. By chance link status detection continued to work on SPR. This is due to bit 12 being a configuration bit which is in sync with the status bit. Fix this by checking for a SPR device and checking correct status bit. Fixes: 26bfe3d0b227 ("ntb: intel: Add Icelake (gen4) support for Intel NTB") Tested-by: Jerry Dai <jerry.dai@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-01-28net: stmmac: dwmac-sun8i: make clk really gated during rpm suspendedJisheng Zhang1-19/+11
Currently, the dwmac-sun8i's stmmaceth clk isn't disabled even if the the device has been runtime suspended. The reason is the driver gets the "stmmaceth" clk as tx_clk and enabling it during probe. But there's no other usage of tx_clk except preparing and enabling, so we can remove tx_clk and its usage then rely on the common routine stmmac_probe_config_dt() to prepare and enable the stmmaceth clk during driver initialization, and benefit from the runtime pm feature after probed. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-28net: stmmac: properly handle with runtime pm in stmmac_dvr_remove()Jisheng Zhang1-2/+4
There are two issues with runtime pm handling in stmmac_dvr_remove(): 1. the mac is runtime suspended before stopping dma and rx/tx. We need to ensure the device is properly resumed back. 2. the stmmaceth clk enable/disable isn't balanced in both exit and error handling code path. Take the exit code path for example, when we unbind the driver or rmmod the driver module, the mac is runtime suspended as said above, so the stmmaceth clk is disabled, but stmmac_dvr_remove() stmmac_remove_config_dt() clk_disable_unprepare() CCF will complain this time. The error handling code path suffers from the similar situtaion. Here are kernel warnings in error handling code path on Allwinner D1 platform: [ 1.604695] ------------[ cut here ]------------ [ 1.609328] bus-emac already disabled [ 1.613015] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:952 clk_core_disable+0xcc/0xec [ 1.621039] CPU: 0 PID: 38 Comm: kworker/u2:1 Not tainted 5.14.0-rc4#1 [ 1.627653] Hardware name: Allwinner D1 NeZha (DT) [ 1.632443] Workqueue: events_unbound deferred_probe_work_func [ 1.638286] epc : clk_core_disable+0xcc/0xec [ 1.642561] ra : clk_core_disable+0xcc/0xec [ 1.646835] epc : ffffffff8023c2ec ra : ffffffff8023c2ec sp : ffffffd00411bb10 [ 1.654054] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : ffffffff80ed6a6f [ 1.661272] t1 : ffffffff80ed6a60 t2 : 0000000000000000 s0 : ffffffe001509e00 [ 1.668489] s1 : 0000000000000001 a0 : 0000000000000019 a1 : ffffffff80e80bd8 [ 1.675707] a2 : 00000000ffffefff a3 : 00000000000000f4 a4 : 0000000000000002 [ 1.682924] a5 : 0000000000000001 a6 : 0000000000000030 a7 : 00000000028f5c29 [ 1.690141] s2 : 0000000000000800 s3 : ffffffe001375000 s4 : ffffffe01fdf7a80 [ 1.697358] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff [ 1.704577] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000 [ 1.711794] s11: ffffffe001b80760 t3 : 0000000000000062 t4 : ffffffffffffffff [ 1.719012] t5 : ffffffff80e0f6d8 t6 : ffffffd00411b8f0 [ 1.724321] status: 8000000201800100 badaddr: 0000000000000000 cause: 0000000000000003 [ 1.732233] [<ffffffff8023c2ec>] clk_core_disable+0xcc/0xec [ 1.737810] [<ffffffff80240430>] clk_disable+0x38/0x78 [ 1.742956] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8 [ 1.748451] [<ffffffff8031a500>] stmmac_remove_config_dt+0x1c/0x4c [ 1.754646] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c [ 1.760484] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8 [ 1.765975] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0 [ 1.771382] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c [ 1.777305] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148 [ 1.783402] [<ffffffff8029873c>] driver_probe_device+0x38/0x138 [ 1.789324] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170 [ 1.795508] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0 [ 1.802125] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4 [ 1.807701] [<ffffffff80298d1c>] __device_attach+0xd8/0x184 [ 1.813277] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc [ 1.818852] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4 [ 1.825122] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390 [ 1.830872] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8 [ 1.836362] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 1.841335] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 1.846304] [<ffffffff8001fa60>] process_one_work+0x38c/0x390 [ 1.852054] [<ffffffff80026564>] kthread+0x124/0x160 [ 1.857021] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60 [ 1.862770] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc [ 1.868956] ---[ end trace 8d5c6046255f84a0 ]--- [ 1.873675] ------------[ cut here ]------------ [ 1.878366] bus-emac already unprepared [ 1.882378] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:810 clk_core_unprepare+0xe4/0x168 [ 1.890673] CPU: 0 PID: 38 Comm: kworker/u2:1 Tainted: G W 5.14.0-rc4 #1 [ 1.898674] Hardware name: Allwinner D1 NeZha (DT) [ 1.903464] Workqueue: events_unbound deferred_probe_work_func [ 1.909305] epc : clk_core_unprepare+0xe4/0x168 [ 1.913840] ra : clk_core_unprepare+0xe4/0x168 [ 1.918375] epc : ffffffff8023d6cc ra : ffffffff8023d6cc sp : ffffffd00411bb10 [ 1.925593] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : 0000000000000002 [ 1.932811] t1 : ffffffe01f743be0 t2 : 0000000000000040 s0 : ffffffe001509e00 [ 1.940029] s1 : 0000000000000001 a0 : 000000000000001b a1 : ffffffe00143a800 [ 1.947246] a2 : 0000000000000000 a3 : 00000000000000f4 a4 : 0000000000000001 [ 1.954463] a5 : 0000000000000000 a6 : 0000000005fce2a5 a7 : 0000000000000001 [ 1.961680] s2 : 0000000000000800 s3 : ffffffff80afeb90 s4 : ffffffe01fdf7a80 [ 1.968898] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff [ 1.976115] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000 [ 1.983333] s11: ffffffe001b80760 t3 : ffffffff80b39120 t4 : 0000000000000001 [ 1.990550] t5 : 0000000000000000 t6 : ffffffe001600002 [ 1.995859] status: 8000000201800120 badaddr: 0000000000000000 cause: 0000000000000003 [ 2.003771] [<ffffffff8023d6cc>] clk_core_unprepare+0xe4/0x168 [ 2.009609] [<ffffffff802403a0>] clk_unprepare+0x24/0x3c [ 2.014929] [<ffffffff8031a508>] stmmac_remove_config_dt+0x24/0x4c [ 2.021125] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c [ 2.026965] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8 [ 2.032463] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0 [ 2.037871] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c [ 2.043795] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148 [ 2.049892] [<ffffffff8029873c>] driver_probe_device+0x38/0x138 [ 2.055815] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170 [ 2.061999] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0 [ 2.068616] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4 [ 2.074193] [<ffffffff80298d1c>] __device_attach+0xd8/0x184 [ 2.079769] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc [ 2.085345] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4 [ 2.091616] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390 [ 2.097367] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8 [ 2.102858] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 2.107830] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 2.112800] [<ffffffff8001fa60>] process_one_work+0x38c/0x390 [ 2.118551] [<ffffffff80026564>] kthread+0x124/0x160 [ 2.123520] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60 [ 2.129268] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc [ 2.135455] ---[ end trace 8d5c6046255f84a1 ]--- Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-28IB/hfi1: Fix tstats alloc and deallocMike Marciniszyn1-2/+12
The tstats allocation is done in the accelerated ndo_init function but the allocation is not tested to succeed. The deallocation is not done in the accelerated ndo_uninit function. Resolve issues by testing for an allocation failure and adding the free_percpu in the uninit function. Fixes: aa0616a9bd52 ("IB/hfi1: switch to core handling of rx/tx byte/packet counters") Link: https://lore.kernel.org/r/1642287756-182313-5-git-send-email-mike.marciniszyn@cornelisnetworks.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-01-28IB/hfi1: Fix AIP early init panicMike Marciniszyn1-10/+3
An early failure in hfi1_ipoib_setup_rn() can lead to the following panic: BUG: unable to handle kernel NULL pointer dereference at 00000000000001b0 PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI Workqueue: events work_for_cpu_fn RIP: 0010:try_to_grab_pending+0x2b/0x140 Code: 1f 44 00 00 41 55 41 54 55 48 89 d5 53 48 89 fb 9c 58 0f 1f 44 00 00 48 89 c2 fa 66 0f 1f 44 00 00 48 89 55 00 40 84 f6 75 77 <f0> 48 0f ba 2b 00 72 09 31 c0 5b 5d 41 5c 41 5d c3 48 89 df e8 6c RSP: 0018:ffffb6b3cf7cfa48 EFLAGS: 00010046 RAX: 0000000000000246 RBX: 00000000000001b0 RCX: 0000000000000000 RDX: 0000000000000246 RSI: 0000000000000000 RDI: 00000000000001b0 RBP: ffffb6b3cf7cfa70 R08: 0000000000000f09 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: ffffb6b3cf7cfa90 R14: ffffffff9b2fbfc0 R15: ffff8a4fdf244690 FS: 0000000000000000(0000) GS:ffff8a527f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000001b0 CR3: 00000017e2410003 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __cancel_work_timer+0x42/0x190 ? dev_printk_emit+0x4e/0x70 iowait_cancel_work+0x15/0x30 [hfi1] hfi1_ipoib_txreq_deinit+0x5a/0x220 [hfi1] ? dev_err+0x6c/0x90 hfi1_ipoib_netdev_dtor+0x15/0x30 [hfi1] hfi1_ipoib_setup_rn+0x10e/0x150 [hfi1] rdma_init_netdev+0x5a/0x80 [ib_core] ? hfi1_ipoib_free_rdma_netdev+0x20/0x20 [hfi1] ipoib_intf_init+0x6c/0x350 [ib_ipoib] ipoib_intf_alloc+0x5c/0xc0 [ib_ipoib] ipoib_add_one+0xbe/0x300 [ib_ipoib] add_client_context+0x12c/0x1a0 [ib_core] enable_device_and_get+0xdc/0x1d0 [ib_core] ib_register_device+0x572/0x6b0 [ib_core] rvt_register_device+0x11b/0x220 [rdmavt] hfi1_register_ib_device+0x6b4/0x770 [hfi1] do_init_one.isra.20+0x3e3/0x680 [hfi1] local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 ? create_worker+0x1a0/0x1a0 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The panic happens in hfi1_ipoib_txreq_deinit() because there is a NULL deref when hfi1_ipoib_netdev_dtor() is called in this error case. hfi1_ipoib_txreq_init() and hfi1_ipoib_rxq_init() are self unwinding so fix by adjusting the error paths accordingly. Other changes: - hfi1_ipoib_free_rdma_netdev() is deleted including the free_netdev() since the netdev core code deletes calls free_netdev() - The switch to the accelerated entrances is moved to the success path. Cc: stable@vger.kernel.org Fixes: d99dc602e2a5 ("IB/hfi1: Add functions to transmit datagram ipoib packets") Link: https://lore.kernel.org/r/1642287756-182313-4-git-send-email-mike.marciniszyn@cornelisnetworks.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-01-28IB/hfi1: Fix alloc failure with larger txqueuelenMike Marciniszyn2-12/+26
The following allocation with large txqueuelen will result in the following warning: Call Trace: __alloc_pages_nodemask+0x283/0x2c0 kmalloc_large_node+0x3c/0xa0 __kmalloc_node+0x22a/0x2f0 hfi1_ipoib_txreq_init+0x19f/0x330 [hfi1] hfi1_ipoib_setup_rn+0xd3/0x1a0 [hfi1] rdma_init_netdev+0x5a/0x80 [ib_core] ipoib_intf_init+0x6c/0x350 [ib_ipoib] ipoib_intf_alloc+0x5c/0xc0 [ib_ipoib] ipoib_add_one+0xbe/0x300 [ib_ipoib] add_client_context+0x12c/0x1a0 [ib_core] ib_register_client+0x147/0x190 [ib_core] ipoib_init_module+0xdd/0x132 [ib_ipoib] do_one_initcall+0x46/0x1c3 do_init_module+0x5a/0x220 load_module+0x14c5/0x17f0 __do_sys_init_module+0x13b/0x180 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca For ipoib, the txqueuelen is modified with the module parameter send_queue_size. Fix by changing to use kv versions of the same allocator to handle the large allocations. The allocation embeds a hdr struct that is dma mapped. Change that struct to a pointer to a kzalloced struct. Cc: stable@vger.kernel.org Fixes: d99dc602e2a5 ("IB/hfi1: Add functions to transmit datagram ipoib packets") Link: https://lore.kernel.org/r/1642287756-182313-3-git-send-email-mike.marciniszyn@cornelisnetworks.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-01-28Merge tag 'ieee802154-for-net-2022-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpanDavid S. Miller6-10/+20
Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2022-01-28 An update from ieee802154 for your *net* tree. A bunch of fixes in drivers, all from Miquel Raynal. Clarifying the default channel in hwsim, leak fixes in at86rf230 and ca8210 as well as a symbol duration fix for mcr20a. Topping up the driver fixes with better error codes in nl802154 and a cleanup in MAINTAINERS for an orphaned driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-28gve: fix the wrong AdminQ buffer queue index checkHaiyue Wang1-1/+1
The 'tail' and 'head' are 'unsigned int' type free-running count, when 'head' is overflow, the 'int i (= tail) < u32 head' will be false: Only '- loop 0: idx = 63' result is shown, so it needs to use 'int' type to compare, it can handle the overflow correctly. typedef uint32_t u32; int main() { u32 tail, head; int stail, shead; int i, loop; tail = 0xffffffff; head = 0x00000000; for (i = tail, loop = 0; i < head; i++) { unsigned int idx = i & 63; printf("+ loop %d: idx = %u\n", loop++, idx); } stail = tail; shead = head; for (i = stail, loop = 0; i < shead; i++) { unsigned int idx = i & 63; printf("- loop %d: idx = %u\n", loop++, idx); } return 0; } Fixes: 5cdad90de62c ("gve: Batch AQ commands for creating and destroying queues.") Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.