aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-01-23x86/MCE/AMD: Allow thresholding interface updates after initYazen Ghannam1-1/+1
Changes to the AMD Thresholding sysfs code prevents sysfs writes from updating the underlying registers once CPU init is completed, i.e. "threshold_banks" is set. Allow the registers to be updated if the thresholding interface is already initialized or if in the init path. Use the "set_lvt_off" value to indicate if running in the init path, since this value is only set during init. Fixes: a037f3ca0ea0 ("x86/mce/amd: Make threshold bank setting hotplug robust") Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220117161328.19148-1-yazen.ghannam@amd.com
2022-01-23x86/insn: Add AVX512-FP16 instructions to the x86 instruction decoderAdrian Hunter4-18/+176
The x86 instruction decoder is used for both kernel instructions and user space instructions (e.g. uprobes, perf tools Intel PT), so it is good to update it with new instructions. Add AVX512-FP16 instructions to x86 instruction decoder. Note the EVEX map field is extended by 1 bit, and most instructions are in map 5 and map 6. Reference: Intel AVX512-FP16 Architecture Specification June 2021 Revision 1.0 Document Number: 347407-001US Example using perf tools' x86 instruction decoder test: $ perf test -v "x86 instruction decoder" |& grep vfcmaddcph | head -2 Decoded ok: 62 f6 6f 48 56 cb vfcmaddcph %zmm3,%zmm2,%zmm1 Decoded ok: 62 f6 6f 48 56 8c c8 78 56 34 12 vfcmaddcph 0x12345678(%eax,%ecx,8),%zmm2,%zmm1 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20211202095029.2165714-7-adrian.hunter@intel.com
2022-01-23perf/tests: Add AVX512-FP16 instructions to x86 instruction decoder testAdrian Hunter3-0/+3426
The x86 instruction decoder is used for both kernel instructions and user space instructions (e.g. uprobes, perf tools Intel PT), so it is good to update it with new instructions. Add AVX512-FP16 instructions to x86 instruction decoder test. A subsequent patch adds the instructions to the instruction decoder. Reference: Intel AVX512-FP16 Architecture Specification June 2021 Revision 1.0 Document Number: 347407-001US Example: $ perf test -v "x86 instruction decoder" |& grep vfcmaddcph | head -2 Failed to decode: 62 f6 6f 48 56 cb vfcmaddcph %zmm3,%zmm2,%zmm1 Failed to decode: 62 f6 6f 48 56 8c c8 78 56 34 12 vfcmaddcph 0x12345678(%eax,%ecx,8),%zmm2,%zmm1 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20211202095029.2165714-6-adrian.hunter@intel.com
2022-01-23x86/insn: Add misc instructions to x86 instruction decoderAdrian Hunter2-6/+6
x86 instruction decoder is used for both kernel instructions and user space instructions (e.g. uprobes, perf tools Intel PT), so it is good to update it with new instructions. Add instructions to x86 instruction decoder: User Interrupt clui senduipi stui testui uiret Prediction history reset hreset Serialize instruction execution serialize TSX suspend load address tracking xresldtrk xsusldtrk Reference: Intel Architecture Instruction Set Extensions and Future Features Programming Reference May 2021 Document Number: 319433-044 Example using perf tools' x86 instruction decoder test: $ perf test -v "x86 instruction decoder" |& grep -i hreset Decoded ok: f3 0f 3a f0 c0 00 hreset $0x0 Decoded ok: f3 0f 3a f0 c0 00 hreset $0x0 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20211202095029.2165714-5-adrian.hunter@intel.com
2022-01-23perf/tests: Add misc instructions to the x86 instruction decoder testAdrian Hunter3-0/+50
The x86 instruction decoder is used for both kernel instructions and user space instructions (e.g. uprobes, perf tools Intel PT), so it is good to update it with new instructions. Add the following instructions to the x86 instruction decoder test: User Interrupt clui senduipi stui testui uiret Prediction history reset hreset Serialize instruction execution serialize TSX suspend load address tracking xresldtrk xsusldtrk A subsequent patch adds the instructions to the instruction decoder. Reference: Intel Architecture Instruction Set Extensions and Future Features Programming Reference May 2021 Document Number: 319433-044 Example: $ perf test -v "x86 instruction decoder" |& grep -i hreset Failed to decode length (4 vs expected 6): f3 0f 3a f0 c0 00 hreset $0x0 Failed to decode length (4 vs expected 6): f3 0f 3a f0 c0 00 hreset $0x0 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20211202095029.2165714-4-adrian.hunter@intel.com
2022-01-23x86/insn: Add AMX instructions to the x86 instruction decoderAdrian Hunter2-4/+16
The x86 instruction decoder is used for both kernel instructions and user space instructions (e.g. uprobes, perf tools Intel PT), so it is good to update it with new instructions. Add AMX instructions to the x86 instruction decoder. Reference: Intel Architecture Instruction Set Extensions and Future Features Programming Reference May 2021 Document Number: 319433-044 Example using perf tools' x86 instruction decoder test: $ INSN='ldtilecfg\|sttilecfg\|tdpbf16ps\|tdpbssd\|' $ INSN+='tdpbsud\|tdpbusd\|'tdpbuud\|tileloadd\|' $ INSN+='tileloaddt1\|tilerelease\|tilestored\|tilezero' $ perf test -v "x86 instruction decoder" |& grep -i $INSN Decoded ok: c4 e2 78 49 04 c8 ldtilecfg (%rax,%rcx,8) Decoded ok: c4 c2 78 49 04 c8 ldtilecfg (%r8,%rcx,8) Decoded ok: c4 e2 79 49 04 c8 sttilecfg (%rax,%rcx,8) Decoded ok: c4 c2 79 49 04 c8 sttilecfg (%r8,%rcx,8) Decoded ok: c4 e2 7a 5c d1 tdpbf16ps %tmm0,%tmm1,%tmm2 Decoded ok: c4 e2 7b 5e d1 tdpbssd %tmm0,%tmm1,%tmm2 Decoded ok: c4 e2 7a 5e d1 tdpbsud %tmm0,%tmm1,%tmm2 Decoded ok: c4 e2 79 5e d1 tdpbusd %tmm0,%tmm1,%tmm2 Decoded ok: c4 e2 78 5e d1 tdpbuud %tmm0,%tmm1,%tmm2 Decoded ok: c4 e2 7b 4b 0c c8 tileloadd (%rax,%rcx,8),%tmm1 Decoded ok: c4 c2 7b 4b 14 c8 tileloadd (%r8,%rcx,8),%tmm2 Decoded ok: c4 e2 79 4b 0c c8 tileloaddt1 (%rax,%rcx,8),%tmm1 Decoded ok: c4 c2 79 4b 14 c8 tileloaddt1 (%r8,%rcx,8),%tmm2 Decoded ok: c4 e2 78 49 c0 tilerelease Decoded ok: c4 e2 7a 4b 0c c8 tilestored %tmm1,(%rax,%rcx,8) Decoded ok: c4 c2 7a 4b 14 c8 tilestored %tmm2,(%r8,%rcx,8) Decoded ok: c4 e2 7b 49 c0 tilezero %tmm0 Decoded ok: c4 e2 7b 49 f8 tilezero %tmm7 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20211202095029.2165714-3-adrian.hunter@intel.com
2022-01-23perf/tests: Add AMX instructions to x86 instruction decoder testAdrian Hunter2-0/+57
The x86 instruction decoder is used for both kernel instructions and user space instructions (e.g. uprobes, perf tools Intel PT), so it is good to update it with new instructions. Add AMX instructions to the x86 instruction decoder test. A subsequent patch adds the instructions to the instruction decoder. Reference: Intel Architecture Instruction Set Extensions and Future Features Programming Reference May 2021 Document Number: 319433-044 Example: $ INSN='ldtilecfg\|sttilecfg\|tdpbf16ps\|tdpbssd\|' $ INSN+='tdpbsud\|tdpbusd\|'tdpbuud\|tileloadd\|' $ INSN+='tileloaddt1\|tilerelease\|tilestored\|tilezero' $ perf test -v "x86 instruction decoder" |& grep -i $INSN Failed to decode: c4 e2 78 49 04 c8 ldtilecfg (%rax,%rcx,8) Failed to decode: c4 c2 78 49 04 c8 ldtilecfg (%r8,%rcx,8) Failed to decode: c4 e2 79 49 04 c8 sttilecfg (%rax,%rcx,8) Failed to decode: c4 c2 79 49 04 c8 sttilecfg (%r8,%rcx,8) Failed to decode: c4 e2 7a 5c d1 tdpbf16ps %tmm0,%tmm1,%tmm2 Failed to decode: c4 e2 7b 5e d1 tdpbssd %tmm0,%tmm1,%tmm2 Failed to decode: c4 e2 7a 5e d1 tdpbsud %tmm0,%tmm1,%tmm2 Failed to decode: c4 e2 79 5e d1 tdpbusd %tmm0,%tmm1,%tmm2 Failed to decode: c4 e2 78 5e d1 tdpbuud %tmm0,%tmm1,%tmm2 Failed to decode: c4 e2 7b 4b 0c c8 tileloadd (%rax,%rcx,8),%tmm1 Failed to decode: c4 c2 7b 4b 14 c8 tileloadd (%r8,%rcx,8),%tmm2 Failed to decode: c4 e2 79 4b 0c c8 tileloaddt1 (%rax,%rcx,8),%tmm1 Failed to decode: c4 c2 79 4b 14 c8 tileloaddt1 (%r8,%rcx,8),%tmm2 Failed to decode: c4 e2 78 49 c0 tilerelease Failed to decode: c4 e2 7a 4b 0c c8 tilestored %tmm1,(%rax,%rcx,8) Failed to decode: c4 c2 7a 4b 14 c8 tilestored %tmm2,(%r8,%rcx,8) Failed to decode: c4 e2 7b 49 c0 tilezero %tmm0 Failed to decode: c4 e2 7b 49 f8 tilezero %tmm7 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20211202095029.2165714-2-adrian.hunter@intel.com
2022-01-23ARM: dts: exynos: Add support for Samsung Chagall WiFiHenrik Grimler3-0/+767
Chagall WiFi, with product name Samsung Galaxy Tab S 10.5", is based on Exynos 5420. This device is one of several tablet models released in 2014 based on Exynos 5420. The device tree added here contains support for: - UART - eMMC - SD card - USB CCI has been disabled in the hardware, enabling it would require (de-)soldering a resistor on the board. Trying to boot with it enabled in kernel makes the device hang when CCI is probed. Exynos5420-arndale-octa also has had CCI disabled due to issues, see commit 25217fef3551 ("ARM: dts: disable CCI on exynos5420 based arndale-octa"). Signed-off-by: Henrik Grimler <henrik@grimler.se> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220118185746.299832-4-henrik@grimler.se Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2022-01-23ARM: exynos: only do SMC_CMD_CPU1BOOT call on Exynos4Henrik Grimler1-1/+3
On Exynos5 the call is simply ignored by most variants of the trustzone firmware. However, on some devices it instead causes the device to hang, so let's avoid the call for the SoCs where it should not be needed. To see that the call is ignored, we can look into sboot/tzsw. On most of the Exynos{4,5} devices the part of sboot/tzsw that seem to handle the secure monitor calls is quite easy to recognise, the SMC number is compared to known ones, and if equal it branches to the relevant function. In assembly this looks something like: ;-- handle_smc: 0x00000514 650070e3 cmn r0, 0x65 0x00000518 0a00000a beq loc.smc_cmd_reg 0x0000051c 010070e3 cmn r0, 1 0x00000520 6c00000a beq loc.smc_cmd_init 0x00000524 020070e3 cmn r0, 2 0x00000528 6b00000a beq loc.smc_cmd_info 0x0000052c 030070e3 cmn r0, 3 0x00000530 6e00000a beq loc.smc_cmd_sleep 0x00000534 060070e3 cmn r0, 6 0x00000538 ae00000a beq loc.smc_cmd_save_state 0x0000053c 070070e3 cmn r0, 7 0x00000540 b400000a beq loc.smc_cmd_standby 0x00000544 2b01001a bne loc.smc_return_minus1 where above example is from exynos5420-arndale-octa. As can be seen the case where r0 is 4 (i.e. SMC_CMD_CPU1BOOT) is not handled. The annotations are taken from github.com/hsnaves/exynos5410-firmware, where a large part of the exynos5410 trustzone firmware has been reverse-engineered. Signed-off-by: Henrik Grimler <henrik@grimler.se> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20220118185746.299832-3-henrik@grimler.se Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2022-01-23dt-bindings: arm: samsung: document Chagall WiFi board bindingHenrik Grimler1-0/+1
Add binding for Samsung Galaxy Tab S 10.5", based on Exynos 5420 with codename chagall-wifi. It was released in 2014 and has several siblings with similar hardware. Signed-off-by: Henrik Grimler <henrik@grimler.se> Link: https://lore.kernel.org/r/20220118185746.299832-2-henrik@grimler.se Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2022-01-23EDAC: Use default_groups in kobj_typeGreg Kroah-Hartman2-10/+15
There are currently 2 ways to create a set of sysfs files for a kobj_type, through the default_attrs field, and the default_groups field. Move the edac sysfs code to use default_groups field which has been the preferred way since aa30f47cf666 ("kobject: Add support for default attribute groups to kobj_type") so that the obsolete default_attrs field can be removed soon. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220104112401.1067148-2-gregkh@linuxfoundation.org
2022-01-23EDAC: Use proper list of struct attribute for attributesGreg Kroah-Hartman2-26/+26
The EDAC sysfs code is doing some crazy casting of the list of attributes that is not necessary at all. Instead, properly point to the correct attribute structure in the lists, which removes the need to cast anything and the code is now properly typesafe (as much as sysfs attribute logic is typesafe...) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220104112401.1067148-1-gregkh@linuxfoundation.org
2022-01-23iio: accel: fxls8962af: add padding to regmap for SPISean Nyekjaer4-5/+14
Add missing don't care padding between address and data for SPI transfers Fixes: a3e0b51884ee ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers") Signed-off-by: Sean Nyekjaer <sean@geanix.com> Link: https://lore.kernel.org/r/20211220125144.3630539-1-sean@geanix.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio:imu:adis16480: fix buffering for devices with no burst modeNuno Sá1-1/+6
The trigger handler defined in the driver assumes that burst mode is being used. Hence, for devices that do not support it, we have to use the adis library default trigger implementation. Tested-by: Julia Pineda <julia.pineda@analog.com> Fixes: 941f130881fa9 ("iio: adis16480: support burst read function") Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220114132608.241-1-nuno.sa@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: adc: ad7124: fix mask used for setting AIN_BUFP & AIN_BUFM bitsCosmin Tanislav1-1/+1
According to page 90 of the datasheet [1], AIN_BUFP is bit 6 and AIN_BUFM is bit 5 of the CONFIG_0 -> CONFIG_7 registers. Fix the mask used for setting these bits. [1]: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7124-8.pdf Fixes: 0eaecea6e487 ("iio: adc: ad7124: Add buffered input support") Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Link: https://lore.kernel.org/r/20220112200036.694490-1-cosmin.tanislav@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: adc: tsc2046: fix memory corruption by preventing array overflowOleksij Rempel1-2/+2
On one side we have indio_dev->num_channels includes all physical channels + timestamp channel. On other side we have an array allocated only for physical channels. So, fix memory corruption by ARRAY_SIZE() instead of num_channels variable. Note the first case is a cleanup rather than a fix as the software timestamp channel bit in active_scanmask is never set by the IIO core. Fixes: 9374e8f5a38d ("iio: adc: add ADC driver for the TI TSC2046 controller") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20220107081401.2816357-1-o.rempel@pengutronix.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: adc: tsc2046: add sanity check to avoid to big allocationsOleksij Rempel1-0/+6
To avoid problematic devicetree configurations. Set allocation limit with error message and suggestion on what can be done to solve this issue. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20220117082852.3370869-2-o.rempel@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: adc: tsc2046: add .read_raw supportOleksij Rempel1-21/+97
Add read_raw() support to make use of iio_hwmon and other iio clients. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20220117082852.3370869-1-o.rempel@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: hw_consumer: Use struct_size() helper in kzalloc()Gustavo A. R. Silva1-2/+2
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Also, address the following sparse warnings: drivers/iio/buffer/industrialio-hw-consumer.c:63:23: warning: using sizeof on a flexible structure when using CF='-Wflexible-array-sizeof' Link: https://github.com/KSPP/linux/issues/174 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220120225243.GA37225@embeddedor Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: adis: stylistic changesNuno Sá4-50/+54
Minor stylistic changes to address checkptach complains when called with '--strict'. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220122130905.99-3-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23adis: simplify 'adis_update_bits' macrosNuno Sá1-8/+4
There's no need to use '__builtin_choose_expr' to choose the right call to 'adis_update_bits_base()'. We can change the 'BUILD_BUG_ON()' condition so that it makes sure only the supported sizes are passed in. With that, we can just use 'sizeof(val)' as the size argument of 'adis_update_bits_base()'. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220122130905.99-2-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23MAINTAINERS: add missing files to the adis libNuno Sá1-0/+2
The triggered buffer support was missing in the MAINTAINERS file. Add them. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220122130905.99-1-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23MAINTAINERS: add maintainer for ADMV8818 driverAntoniu Miclaus1-0/+8
Add myself as maintainer for the ADMV8818 driver. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20220117070039.6139-3-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23MAINTAINERS: add maintainer for ADMV1013 driverAntoniu Miclaus1-0/+8
Add myself as maintainer for the ADMV1013 driver. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20220117070039.6139-2-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23MAINTAINERS: add maintainer for AD7293 driverAntoniu Miclaus1-0/+8
Add myself as maintainer for the AD7293 driver. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20220117070039.6139-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: sps30: Use sysfs_emit()Lars-Peter Clausen1-1/+1
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `cleaning_period` device attribute of the sps30 driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211216185217.1054495-14-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: scd4x: Use sysfs_emit()Lars-Peter Clausen1-1/+1
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `calibration_auto_enable` device attribute of the scd4x driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211216185217.1054495-13-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: ms_sensors: Use sysfs_emit()Lars-Peter Clausen1-2/+2
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `battery_low` and `heater_enable` device attributes of the ms_sensors driver shared code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211216185217.1054495-12-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: max9611: Use sysfs_emit()Lars-Peter Clausen1-1/+1
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `in_power_shunt_resistor` and `in_current_shunt_resistor` device attributes of the max9611 driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Link: https://lore.kernel.org/r/20211216185217.1054495-11-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: max31865: Use sysfs_emit()Lars-Peter Clausen1-2/+2
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom ``in_filter_notch_center_frequency` and fault_ovuv` device attributes of the max31865 driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211216185217.1054495-10-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: max31856: Use sysfs_emit()Lars-Peter Clausen1-2/+2
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `fault_ovuv`, `fault_oc` and `in_temp_filter_notch_center_frequency` device attributes of the max31856 driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211216185217.1054495-9-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: lm3533: Use sysfs_emit()Lars-Peter Clausen1-3/+3
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom device attributes of the lm3533 driver. Note this driver was using scnprintf correctly so this change is about ensuring examples of code that might get cut and paste into new drivers are using current best practice. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211216185217.1054495-8-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: ina2xx-adc: sysfs_emit()Lars-Peter Clausen1-1/+1
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `in_allow_async_readout` device attribute of the ina2xx-adc driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211216185217.1054495-7-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: as3935: Use sysfs_emit()Lars-Peter Clausen1-2/+2
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `noise_level_tripped` device attribute of the as3935 driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211216185217.1054495-6-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: ad9523: Use sysfs_emit()Lars-Peter Clausen1-1/+1
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom device attributes of the ad9523 driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211216185217.1054495-5-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: ad7192: Use sysfs_emit()Lars-Peter Clausen1-2/+2
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `ac_excitation` and `bridge_swtich` attributes of the ad7192 driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211216185217.1054495-4-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: dmaengine-buffer: Use sysfs_emit()Lars-Peter Clausen1-1/+1
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() for the `length_align_bytes` buffer attribute. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211216185217.1054495-3-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: core: Use sysfs_emit()Lars-Peter Clausen2-3/+3
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. This patch converts the places in the IIO core that follow the pattern of return s*printf(...) to return sysfs_emit(...) This covers the new places that have been introduced where sprintf() is used for formatting sysfs output since the last time this was done in commit 83ca56b663cf ("iio: core: Use sysfs_emit() (trivial bits)"). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211216185217.1054495-2-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: adc: tsc2046: rework the trigger state machineOleksij Rempel1-45/+98
Initially this was designed to: | Fix sleeping in atomic context warning and a deadlock after iio_trigger_poll() | call | | If iio_trigger_poll() is called after IRQ was disabled, we will call | reenable_trigger() directly from hard IRQ or hrtimer context instead of | IRQ thread. In this case we will run in to multiple issue as sleeping in atomic | context and a deadlock. | | To avoid this issue, rework the trigger to use state machine. All state | changes are done over the hrtimer, so it allows us to drop fsleep() and | avoid the deadlock. Since this issue was fixed by: 9020ef659885 ("iio: trigger: Fix a scheduling whilst atomic issue seen on tsc2046"). This patch is a cleanup to make state machine easier to follow. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20220111130402.3404769-1-o.rempel@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23MAINTAINERS: add maintainer for ADRF6780 driverAntoniu Miclaus1-0/+8
Add myself as maintainer for the ADRF6780 driver. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20220103111624.82262-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23MAINTAINERS: fix Analog Devices linksAntoniu Miclaus1-28/+28
The forum link for the Analog Devices linux drivers has changed. Fix the links to redirect to the correct forum subsection. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20220103104412.81247-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: core: Fix the kernel doc regarding the currentmode iio_dev entryMiquel Raynal1-1/+1
This is an internal variable, which should be accessed in a very sporadic way and in no case changed by any device driver. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20211215151344.163036-2-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: adc: mt8186: Add compatible node for mt8186Guodong Liu1-0/+6
This commit adds mt8186 compatible node. Signed-off-by: Guodong Liu <guodong.liu@mediatek.com> Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220110084841.575-2-guodong.liu@mediatek.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23dt-bindings: iio: adc: Add compatible for Mediatek MT8186Guodong Liu1-0/+1
This commit adds dt-binding documentation of auxadc for Mediatek MT8186 SoC Platform. Signed-off-by: Guodong Liu <guodong.liu@mediatek.com> Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220110084841.575-1-guodong.liu@mediatek.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: st_sensors: don't always auto-enable I2C and SPI interface driversNikita Yushchenko6-68/+104
This patch makes I2C and SPI interface drivers for STMicroelectronics sensor chips individually selectable via Kconfig. The default is kept unchanged - I2C and SPI interface drivers are still selected by default if the corresponding bus support is available. However, the patch makes it possible to explicitly disable drivers that are not needed for a particular target. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220110152432.3799227-1-nikita.yoush@cogentembedded.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: adc: rzg2l_adc: Fix typoLad Prabhakar1-2/+2
Fix typo RZG2L_ADSMP_DEFUALT_SAMPLING -> RZG2L_ADSMP_DEFAULT_SAMPLING. Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Pavel Machek <pavel@denx.de> Link: https://lore.kernel.org/r/20220107172529.12361-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23dt-bindings: iio/adc: ti,palmas-gpadc: Split interrupt fields in exampleRob Herring1-3/+3
Best practice for multi-cell property values is to bracket each multi-cell value. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220106182518.1435497-3-robh@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio:accel:dmard09: Tidy up white space around {} in id tableJonathan Cameron1-1/+1
Previously inconsistent with a space after { but not before }. Tidy that up to avoid providing a bad example that might get copied into other drivers. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20211230174911.78291-17-jic23@kernel.org
2022-01-23iio:proximity:vl53l0x: Tidy up white space around {} in id tablesJonathan Cameron1-1/+1
Previously inconsistent with a space after { but not before }. Tidy that up to avoid providing a bad example that might get copied into other drivers. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Ivan Drobyshevskyi <drobyshevskyi@gmail.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20211230174911.78291-16-jic23@kernel.org
2022-01-23iio:light:tsl2722: Fix inconsistent spacing before } in id tableJonathan Cameron1-1/+1
The final entry was missing a space. Tidy that up. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20211230174911.78291-15-jic23@kernel.org
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.