| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It is better to use get_task_comm() instead of the open coded string
copy as we do in other places.
struct elf_prpsinfo is used to dump the task information in userspace
coredump or kernel vmcore. Below is the verification of vmcore,
crash> ps
PID PPID CPU TASK ST %MEM VSZ RSS COMM
0 0 0 ffffffff9d21a940 RU 0.0 0 0 [swapper/0]
> 0 0 1 ffffa09e40f85e80 RU 0.0 0 0 [swapper/1]
> 0 0 2 ffffa09e40f81f80 RU 0.0 0 0 [swapper/2]
> 0 0 3 ffffa09e40f83f00 RU 0.0 0 0 [swapper/3]
> 0 0 4 ffffa09e40f80000 RU 0.0 0 0 [swapper/4]
> 0 0 5 ffffa09e40f89f80 RU 0.0 0 0 [swapper/5]
0 0 6 ffffa09e40f8bf00 RU 0.0 0 0 [swapper/6]
> 0 0 7 ffffa09e40f88000 RU 0.0 0 0 [swapper/7]
> 0 0 8 ffffa09e40f8de80 RU 0.0 0 0 [swapper/8]
> 0 0 9 ffffa09e40f95e80 RU 0.0 0 0 [swapper/9]
> 0 0 10 ffffa09e40f91f80 RU 0.0 0 0 [swapper/10]
> 0 0 11 ffffa09e40f93f00 RU 0.0 0 0 [swapper/11]
> 0 0 12 ffffa09e40f90000 RU 0.0 0 0 [swapper/12]
> 0 0 13 ffffa09e40f9bf00 RU 0.0 0 0 [swapper/13]
> 0 0 14 ffffa09e40f98000 RU 0.0 0 0 [swapper/14]
> 0 0 15 ffffa09e40f9de80 RU 0.0 0 0 [swapper/15]
It works well as expected.
Some comments are added to explain why we use the hard-coded 16.
Link: https://lkml.kernel.org/r/20211120112738.45980-5-laoar.shao@gmail.com
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We'd better use the helper get_task_comm() rather than the open-coded
strlcpy() to get task comm. As the comment above the hard-coded 16, we
can replace it with TASK_COMM_LEN.
Link: https://lkml.kernel.org/r/20211120112738.45980-4-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If the dest buffer size is smaller than sizeof(tsk->comm), the buffer
will be without null ternimator, that may cause problem. Using
strscpy_pad() instead of strncpy() in __get_task_comm() can make the
string always nul ternimated and zero padded.
Link: https://lkml.kernel.org/r/20211120112738.45980-3-laoar.shao@gmail.com
Suggested-by: Kees Cook <keescook@chromium.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "task comm cleanups", v2.
This patchset is part of the patchset "extend task comm from 16 to
24"[1]. Now we have different opinion that dynamically allocates memory
to store kthread's long name into a separate pointer, so I decide to
take the useful cleanups apart from the original patchset and send it
separately[2].
These useful cleanups can make the usage around task comm less
error-prone. Furthermore, it will be useful if we want to extend task
comm in the future.
[1]. https://lore.kernel.org/lkml/20211101060419.4682-1-laoar.shao@gmail.com/
[2]. https://lore.kernel.org/lkml/CALOAHbAx55AUo3bm8ZepZSZnw7A08cvKPdPyNTf=E_tPqmw5hw@mail.gmail.com/
This patch (of 7):
strlcpy() can trigger out-of-bound reads on the source string[1], we'd
better use strscpy() instead. To make it be robust against full tsk->comm
copies that got noticed in other places, we should make sure it's zero
padded.
[1] https://github.com/KSPP/linux/issues/89
Link: https://lkml.kernel.org/r/20211120112738.45980-1-laoar.shao@gmail.com
Link: https://lkml.kernel.org/r/20211120112738.45980-2-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Include a note at the top to discourage people from including it in
headers.
Link: https://lkml.kernel.org/r/20211209150803.4473-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When kernel.h is used in the headers it adds a lot into dependency hell,
especially when there are circular dependencies are involved.
Replace kernel.h inclusion with the list of what is really being used.
The rest of the changes are induced by the above and may not be split.
Link: https://lkml.kernel.org/r/20211209123823.20425-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> [brcmfmac]
Acked-by: Kalle Valo <kvalo@kernel.org>
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com>
Cc: Wright Feng <wright.feng@infineon.com>
Cc: Chung-hsien Hsu <chung-hsien.hsu@infineon.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Subsequent if judgments will assign new values to ret, so the statement
here should be deleted
The clang_analyzer complains as follows:
fs/proc/proc_sysctl.c:
Value stored to 'ret' is never read
Link: https://lkml.kernel.org/r/20211230063622.586360-1-luo.penghao@zte.com.cn
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
sysctl_print_dir() always terminates the printed path name with a slash,
so printing a slash before the file part causes a duplicate like in
sysctl duplicate entry: /kernel//perf_user_access
Fix this by dropping the extra slash.
Link: https://lkml.kernel.org/r/e3054d605dc56f83971e4b6d2f5fa63a978720ad.1641551872.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Convert return type of proc_fd_access_allowed() and the 'allowed' in it
to be boolean since the return type of ptrace_may_access() is boolean.
Link: https://lkml.kernel.org/r/20211219024404.29779-1-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Change the proc_create[_data]() stubs which are used when CONFIG_PROC_FS
is not set from #defines to a static inline stubs.
This should fix clang -Werror builds failing due to errors like this:
drivers/platform/x86/thinkpad_acpi.c:918:30: error: unused variable
'dispatch_proc_ops' [-Werror,-Wunused-const-variable]
Fixing this in include/linux/proc_fs.h should ensure that the same issue
is also fixed in any other drivers hitting the same -Werror issue.
[akpm@linux-foundation.org: fix CONFIG_PROC_FS=n]
[akpm@linux-foundation.org: fix arch/sparc/kernel/led.c]
[akpm@linux-foundation.org: fix build]
Link: https://lkml.kernel.org/r/20211116131112.508304-1-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In commit cc5f2704c934 ("proc/vmcore: convert oldmem_pfn_is_ram callback
to more generic vmcore callbacks"), we added detection of surprise
vmcore_cb unregistration after the vmcore was already opened. Once
detected, we warn the user and simulate reading zeroes from that point
on when accessing the vmcore.
The basic reason was that unexpected unregistration, for example, by
manually unbinding a driver from a device after opening the vmcore, is
not supported and could result in reading oldmem the vmcore_cb would
have actually prohibited while registered. However, something like that
can similarly be trigger by a user that's really looking for trouble
simply by unbinding the relevant driver before opening the vmcore -- or
by disallowing loading the driver in the first place. So it's actually
of limited help.
Currently, unregistration can only be triggered via virtio-mem when
manually unbinding the driver from the device inside the VM; there is no
way to trigger it from the hypervisor, as hypervisors don't allow for
unplugging virtio-mem devices -- ripping out system RAM from a VM
without coordination with the guest is usually not a good idea.
The important part is that unbinding the driver and unregistering the
vmcore_cb while concurrently reading the vmcore won't crash the system,
and that is handled by the rwsem.
To make the mechanism more future proof, let's remove the "read zero"
part, but leave the warning in place. For example, we could have a
future driver (like virtio-balloon) that will contact the hypervisor to
figure out if we already populated a page for a given PFN.
Hotunplugging such a device and consequently unregistering the vmcore_cb
could be triggered from the hypervisor without harming the system even
while kdump is running. In that case, we don't want to silently end up
with a vmcore that contains wrong data, because the user inside the VM
might be unaware of the hypervisor action and might easily miss the
warning in the log.
Link: https://lkml.kernel.org/r/20211111192243.22002-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With NEED_PER_CPU_PAGE_FIRST_CHUNK enabled, we need a function to
populate pte, this patch adds a generic pcpu populate pte function,
pcpu_populate_pte(), which is marked __weak and used on most
architectures, but it is overridden on x86, which has its own
implementation.
Link: https://lkml.kernel.org/r/20211216112359.103822-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With the previous patch, we could add a generic pcpu first chunk
allocate and free function to cleanup the duplicated definations on each
architecture.
Link: https://lkml.kernel.org/r/20211216112359.103822-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add pcpu_fc_cpu_to_node_fn_t and pass it into pcpu_fc_alloc_fn_t, pcpu
first chunk allocation will call it to alloc memblock on the
corresponding node by it, this is prepare for the next patch.
Link: https://lkml.kernel.org/r/20211216112359.103822-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: percpu: Cleanup percpu first chunk function".
When supporting page mapping percpu first chunk allocator on arm64, we
found there are lots of duplicated codes in percpu embed/page first chunk
allocator. This patchset is aimed to cleanup them and should no function
change.
The currently supported status about 'embed' and 'page' in Archs shows
below,
embed: NEED_PER_CPU_PAGE_FIRST_CHUNK
page: NEED_PER_CPU_EMBED_FIRST_CHUNK
embed page
------------------------
arm64 Y Y
mips Y N
powerpc Y Y
riscv Y N
sparc Y Y
x86 Y Y
------------------------
There are two interfaces about percpu first chunk allocator,
extern int __init pcpu_embed_first_chunk(size_t reserved_size, size_t dyn_size,
size_t atom_size,
pcpu_fc_cpu_distance_fn_t cpu_distance_fn,
- pcpu_fc_alloc_fn_t alloc_fn,
- pcpu_fc_free_fn_t free_fn);
+ pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn);
extern int __init pcpu_page_first_chunk(size_t reserved_size,
- pcpu_fc_alloc_fn_t alloc_fn,
- pcpu_fc_free_fn_t free_fn,
- pcpu_fc_populate_pte_fn_t populate_pte_fn);
+ pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn);
The pcpu_fc_alloc_fn_t/pcpu_fc_free_fn_t is killed, we provide generic
pcpu_fc_alloc() and pcpu_fc_free() function, which are called in the
pcpu_embed/page_first_chunk().
1) For pcpu_embed_first_chunk(), pcpu_fc_cpu_to_node_fn_t is needed to be
provided when archs supported NUMA.
2) For pcpu_page_first_chunk(), the pcpu_fc_populate_pte_fn_t is killed too,
a generic pcpu_populate_pte() which marked '__weak' is provided, if you
need a different function to populate pte on the arch(like x86), please
provide its own implementation.
[1] https://github.com/kevin78/linux.git percpu-cleanup
This patch (of 4):
The HAVE_SETUP_PER_CPU_AREA/NEED_PER_CPU_EMBED_FIRST_CHUNK/
NEED_PER_CPU_PAGE_FIRST_CHUNK/USE_PERCPU_NUMA_NODE_ID configs, which have
duplicate definitions on platforms that subscribe it.
Move them into mm, drop these redundant definitions and instead just
select it on applicable platforms.
Link: https://lkml.kernel.org/r/20211216112359.103822-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20211216112359.103822-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To 2.35
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
For improved debugging it can be helpful to send version information
as other clients do during NTLMSSP negotiation. See protocol document
MS-NLMP section 2.2.1.1
Set the major and minor versions based on the kernel version, and the
BuildNumber based on the internal cifs.ko module version number,
and following the recommendation in the protocol documentation
(MS-NLMP section 2.2.10) we set the NTLMRevisionCurrent field to 15.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
arch/riscv/mm/init.c:48:11-16: WARNING: conversion to bool not needed here
Remove unneeded conversion to bool
Semantic patch information:
Relational and logical operators evaluate to bool,
explicit conversion is overly verbose and unneeded.
Generated by: scripts/coccinelle/misc/boolconv.cocci
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This patchset allows to have a single kernel for sv39 and sv48 without
being relocatable.
The idea comes from Arnd Bergmann who suggested to do the same as x86,
that is mapping the kernel to the end of the address space, which allows
the kernel to be linked at the same address for both sv39 and sv48 and
then does not require to be relocated at runtime.
This implements sv48 support at runtime. The kernel will try to boot
with 4-level page table and will fallback to 3-level if the HW does not
support it. Folding the 4th level into a 3-level page table has almost
no cost at runtime.
Note that kasan region had to be moved to the end of the address space
since its location must be known at compile-time and then be valid for
both sv39 and sv48 (and sv57 that is coming).
* riscv-sv48-v3:
riscv: Explicit comment about user virtual address space size
riscv: Use pgtable_l4_enabled to output mmu_type in cpuinfo
riscv: Implement sv48 support
asm-generic: Prepare for riscv use of pud_alloc_one and pud_free
riscv: Allow to dynamically define VA_BITS
riscv: Introduce functions to switch pt_ops
riscv: Split early kasan mapping to prepare sv48 introduction
riscv: Move KASAN mapping next to the kernel mapping
riscv: Get rid of MAXPHYSMEM configs
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
[Why]
FIFO reset is only necessary for fast boot sequence, where otg is disabled
and dig fe is enabled when changing dispclk. Fast boot is only enabled
on embedded displays.
[How]
Change FIFO reset condition to "embedded display only".
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
DCN301 has seamless boot enabled. With MPC split enabled
at the same time, system will hang.
[How]
Revert MPC split policy back to "MPC_SPLIT_AVOID". Since we have
ODM combine enabled on DCN301, pipe split is not necessary here.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SDMA FW fixes the hang issue for adding heavy-weight TLB
flush on Arcturus, so we can enable it.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Debug VRAM access through SDMA has several broken parts resulting in
silent MMIO fallback.
BO kernel creation takes the location of the cpu addr pointer, not
the pointer itself for address kmap.
drm_dev_enter return true on success so change access check.
The source BO is reserved but not pinned so find the address using the
cursor offset relative to its memory domain start.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
That's just a leftover from old radeon days and was preventing CS and GART
bindings before the hardware was initialized. But nowdays that is
perfectly valid.
The only thing we need to warn about are GART binding before the table
is even allocated.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove set but unused variable.
warning: variable 'umc_reg_offset' set but not used
Signed-off-by: mziya <Mohammadzafar.ziya@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove repeated calls.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch will modify a pair of functions for pcie port wreg/rreg.
AMD GPU have had an independent NBIO block from SOC15 arch.
If the dirver wants to read/write the address space of the pcie devices,
it has to go through the NBIO block.
This patch will move the pcie port wreg/rreg functions to
"amdgpu_device.c", so that to reuse the functions on the
future GPU ASICs.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch will add vram check function for GMC block.
It will write pattern data to the vram and then read back from the vram,
so that to verify the work status of vram.
This patch will cover gmc v6/7/8/9/10.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Define precisely the size of the user accessible virtual space size
for sv32/39/48 mmu types and explain why the whole virtual address
space is split into 2 equal chunks between kernel and user space.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Now that the mmu type is determined at runtime using SATP
characteristic, use the global variable pgtable_l4_enabled to output
mmu type of the processor through /proc/cpuinfo instead of relying on
device tree infos.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
By adding a new 4th level of page table, give the possibility to 64bit
kernel to address 2^48 bytes of virtual address: in practice, that offers
128TB of virtual address space to userspace and allows up to 64TB of
physical memory.
If the underlying hardware does not support sv48, we will automatically
fallback to a standard 3-level page table by folding the new PUD level into
PGDIR level. In order to detect HW capabilities at runtime, we
use SATP feature that ignores writes with an unsupported mode.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In the following commits, riscv will almost use the generic versions of
pud_alloc_one and pud_free but an additional check is required since those
functions are only relevant when using at least a 4-level page table, which
will be determined at runtime on riscv.
So move the content of those functions into other functions that riscv
can use without duplicating code.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
With 4-level page table folding at runtime, we don't know at compile time
the size of the virtual address space so we must set VA_BITS dynamically
so that sparsemem reserves the right amount of memory for struct pages.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This simply gathers the different pt_ops initialization in functions
where a comment was added to explain why the page table operations must
be changed along the boot process.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Now that kasan shadow region is next to the kernel, for sv48, this
region won't be aligned on PGDIR_SIZE and then when populating this
region, we'll need to get down to lower levels of the page table. So
instead of reimplementing the page table walk for the early population,
take advantage of the existing functions used for the final population.
Note that kasan swapper initialization must also be split since memblock
is not initialized at this point and as the last PGD is shared with the
kernel, we'd need to allocate a PUD so postpone the kasan final
population after the kernel population is done.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Now that KASAN_SHADOW_OFFSET is defined at compile time as a config,
this value must remain constant whatever the size of the virtual address
space, which is only possible by pushing this region at the end of the
address space next to the kernel mapping.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
CONFIG_MAXPHYSMEM_* are actually never used, even the nommu defconfigs
selecting the MAXPHYSMEM_2GB had no effects on PAGE_OFFSET since it was
preempted by !MMU case right before.
In addition, the move of the kernel mapping at the end of the address
space broke the use of MAXPHYSMEM_2G with MMU since it defines PAGE_OFFSET
at the same address as the kernel mapping.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Conor Dooley <Conor.Dooley@microchip.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The xfs_inodegc_stop() helper performs a high level flush of pending
work on the percpu queues and then runs a cancel_work_sync() on each
of the percpu work tasks to ensure all work has completed before
returning. While cancel_work_sync() waits for wq tasks to complete,
it does not guarantee work tasks have started. This means that the
_stop() helper can queue and instantly cancel a wq task without
having completed the associated work. This can be observed by
tracepoint inspection of a simple "rm -f <file>; fsfreeze -f <mnt>"
test:
xfs_destroy_inode: ... ino 0x83 ...
xfs_inode_set_need_inactive: ... ino 0x83 ...
xfs_inodegc_stop: ...
...
xfs_inodegc_start: ...
xfs_inodegc_worker: ...
xfs_inode_inactivating: ... ino 0x83 ...
The first few lines show that the inode is removed and need inactive
state set, but the inactivation work has not completed before the
inodegc mechanism stops. The inactivation doesn't actually occur
until the fs is unfrozen and the gc mechanism starts back up. Note
that this test requires fsfreeze to reproduce because xfs_freeze
indirectly invokes xfs_fs_statfs(), which calls xfs_inodegc_flush().
When this occurs, the workqueue try_to_grab_pending() logic first
tries to steal the pending bit, which does not succeed because the
bit has been set by queue_work_on(). Subsequently, it checks for
association of a pool workqueue from the work item under the pool
lock. This association is set at the point a work item is queued and
cleared when dequeued for processing. If the association exists, the
work item is removed from the queue and cancel_work_sync() returns
true. If the pwq association is cleared, the remove attempt assumes
the task is busy and retries (eventually returning false to the
caller after waiting for the work task to complete).
To avoid this race, we can flush each work item explicitly before
cancel. However, since the _queue_all() already schedules each
underlying work item, the workqueue level helpers are sufficient to
achieve the same ordering effect. E.g., the inodegc enabled flag
prevents scheduling any further work in the _stop() case. Use the
drain_workqueue() helper in this particular case to make the intent
a bit more self explanatory.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Lots of machines these days seem to have a crappy type1 DP dual
mode adaptor chip slapped onto the motherboard. Based on the
DP dual mode spec we currently limit those to 165MHz max TMDS
clock.
Windows OTOH ignores DP dual mode adaptors when the VBT
indicates that the port is not actually DP++, so we can
perhaps assume that the vendors did intend that the 165MHz
clock limit doesn't apply here. Though it would be much
nicer if they actually declared an explicit limit through
VBT, but that doesn't seem to be happening either.
So in order to match Windows behaviour let's ignore the
DP dual mode adaptor's TMDS clock limit for ports that
don't look like DP++ in VBT.
Unfortunately many older VBTs misdelcare their DP++ ports
as just HDMI (eg. ILK Dell Latitude E5410) or DP (eg. SNB
Lenovo ThinkPad X220). So we can't really do this universally
without risking black screens. I suppose a sensible cutoff
is HSW+ since that's when 4k became a thing and one might
assume that the machines have been tested to work with higher
TMDS clock rates.
v2: s/IS_BROADWELL/IS_HASWELL/
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222161738.12478-1-ville.syrjala@linux.intel.com
|
|
Replace the DEVICE_TYPE_DP_DUAL_MODE_BITS stuff with just
a DP+HDMI check. The rest of the bits shouldn't really
matter anyway.
The slight change in behaviour here is that now we do look at
the DEVICE_TYPE_NOT_HDMI_OUTPUT bit (via
intel_bios_encoder_supports_hdmi()) when we previously ignored it.
The one platform we know that has problems with that bit is VLV.
But IIRC the problem was always that buggy VBTs basically never
set that bit. So that should be OK since all it would do is make
all DVI ports look like HDMI ports instead. Also can't imagine
there are many VLV machines with actual DVI ports in existence.
We still keep the rest of the dvo_port/aux_ch checks as we
can't trust that DP+HDMI device type equals DP++ due to
buggy VBTs.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217155403.31477-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Now that we parse the DDI port info from the VBT on all g4x+ platforms
we can throw out all the old codepaths in intel_bios_is_port_present(),
intel_bios_is_port_edp() and intel_bios_is_port_dp_dual_mode(). None
of these should be called on pre-g4x platforms.
For good measure throw in a WARN into intel_bios_is_port_present()
should someone get the urge to call it on older platforms. The
other two functions are specific to HDMI and DP so should not need
any protection as those encoder types don't even exist on older
platforms.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217155403.31477-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Extend the vbt.ports[] stuff for all g4x+ platforms. We do need
to drop the version check as some elk/ctg machines may have VBTs
older than that. The oldest I know is an elk with version 142.
But the child device stuff has had the correct size since at
least version 125 (observed on my sdg), so from that angle this
should be totally safe.
This does couple of things:
- Start using the aux_ch/ddc_pin from VBT instead of just the
hardcoded defaults. Hopefully there are no VBTs with entirely
bogus information here.
- Start using i915->vbt.ports[] for intel_bios_is_port_dp_dual_mode().
Should be fine as the logic doesn't actually change.
- Start using i915->vbt.ports[] for intel_bios_is_port_edp().
The old codepath only looks at the DP DVO ports, the new codepath
looks at both DP and HDMI DVO ports. In principle that should not
matter. We also stop looking at some of the other device type bits
(eg. LVDS,MIPI,ANALOG,etc.). Hopefully no VBT is broken enough that
it sets up totally conflicting device type bits (eg. LVDS+eDP at the
same time). We also lose the "g4x->no eDP ever" hardcoding (shouldn't
be hard to re-introduce that into eg. sanitize_device_type() if needed).
Lightly smoke tested on a set of machines (one of ctg,ilk,snb,ivb each)
with both DP and HDMI (DP++). Everything still worked as it should.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217155403.31477-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
YiFei Zhu says:
====================
Right now, most cgroup hooks are best used for permission checks. They
can only reject a syscall with -EPERM, so a cause of a rejection, if
the rejected by eBPF cgroup hooks, is ambiguous to userspace.
Additionally, if the syscalls are implemented in eBPF, all permission
checks and the implementation has to happen within the same filter,
as programs executed later in the series of progs are unaware of the
return values return by the previous progs.
This patch series adds two helpers, bpf_get_retval and bpf_set_retval,
that allows hooks to get/set the return value of syscall to userspace.
This also allows later progs to retrieve retval set by previous progs.
For legacy programs that rejects a syscall without setting the retval,
for backwards compatibility, if a prog rejects without itself or a
prior prog setting retval to an -err, the retval is set by the kernel
to -EPERM.
For getsockopt hooks that has ctx->retval, this variable mirrors that
that accessed by the helpers.
Additionally, the following user-visible behavior for getsockopt
hooks has changed:
- If a prior filter rejected the syscall, it will be visible
in ctx->retval.
- Attempting to change the retval arbitrarily is now allowed and
will not cause an -EFAULT.
- If kernel rejects a getsockopt syscall before running the hooks,
the error will be visible in ctx->retval. Returning 0 from the
prog will not overwrite the error to -EPERM unless there is an
explicit call of bpf_set_retval(-EPERM)
Tests have been added in this series to test the behavior of the helper
with cgroup setsockopt getsockopt hooks.
Patch 1 changes the API of macros to prepare for the next patch and
should be a no-op.
Patch 2 moves ctx->retval to a struct pointed to by current
task_struct.
Patch 3 implements the helpers.
Patch 4 tests the behaviors of the helpers.
Patch 5 updates a test after the test broke due to the visible changes.
v1 -> v2:
- errno -> retval
- split one helper to get & set helpers
- allow retval to be set arbitrarily in the general case
- made the helper retval and context retval mirror each other
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The tests would break without this patch, because at one point it calls
getsockopt(fd, SOL_TCP, TCP_ZEROCOPY_RECEIVE, &buf, &optlen)
This getsockopt receives the kernel-set -EINVAL. Prior to this patch
series, the eBPF getsockopt hook's -EPERM would override kernel's
-EINVAL, however, after this patch series, return 0's automatic
-EPERM will not; the eBPF prog has to explicitly bpf_set_retval(-EPERM)
if that is wanted.
I also removed the explicit mentions of EPERM in the comments in the
prog.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/4f20b77cb46812dbc2bdcd7e3fa87c7573bde55e.1639619851.git.zhuyifei@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The tests checks how different ways of interacting with the helpers
(getting retval, setting EUNATCH, EISCONN, and legacy reject
returning 0 without setting retval), produce different results in
both the setsockopt syscall and the retval returned by the helper.
A few more tests verify the interaction between the retval of the
helper and the retval in getsockopt context.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/43ec60d679ae3f4f6fd2460559c28b63cb93cd12.1639619851.git.zhuyifei@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The helpers continue to use int for retval because all the hooks
are int-returning rather than long-returning. The return value of
bpf_set_retval is int for future-proofing, in case in the future
there may be errors trying to set the retval.
After the previous patch, if a program rejects a syscall by
returning 0, an -EPERM will be generated no matter if the retval
is already set to -err. This patch change it being forced only if
retval is not -err. This is because we want to support, for
example, invoking bpf_set_retval(-EINVAL) and return 0, and have
the syscall return value be -EINVAL not -EPERM.
For BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY, the prior behavior is
that, if the return value is NET_XMIT_DROP, the packet is silently
dropped. We preserve this behavior for backward compatibility
reasons, so even if an errno is set, the errno does not return to
caller. However, setting a non-err to retval cannot propagate so
this is not allowed and we return a -EFAULT in that case.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/b4013fd5d16bed0b01977c1fafdeae12e1de61fb.1639619851.git.zhuyifei@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The retval value is moved to struct bpf_cg_run_ctx for ease of access
in different prog types with different context structs layouts. The
helper implementation (to be added in a later patch in the series) can
simply perform a container_of from current->bpf_ctx to retrieve
bpf_cg_run_ctx.
Unfortunately, there is no easy way to access the current task_struct
via the verifier BPF bytecode rewrite, aside from possibly calling a
helper, so a pointer to current task is added to struct bpf_sockopt_kern
so that the rewritten BPF bytecode can access struct bpf_cg_run_ctx with
an indirection.
For backward compatibility, if a getsockopt program rejects a syscall
by returning 0, an -EPERM will be generated, by having the
BPF_PROG_RUN_ARRAY_CG family macros automatically set the retval to
-EPERM. Unlike prior to this patch, this -EPERM will be visible to
ctx->retval for any other hooks down the line in the prog array.
Additionally, the restriction that getsockopt filters can only set
the retval to 0 is removed, considering that certain getsockopt
implementations may return optlen. Filters are now able to set the
value arbitrarily.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/73b0325f5c29912ccea7ea57ec1ed4d388fc1d37.1639619851.git.zhuyifei@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Right now BPF_PROG_RUN_ARRAY and related macros return 1 or 0
for whether the prog array allows or rejects whatever is being
hooked. The caller of these macros then return -EPERM or continue
processing based on thw macro's return value. Unforunately this is
inflexible, since -EPERM is the only err that can be returned.
This patch should be a no-op; it prepares for the next patch. The
returning of the -EPERM is moved to inside the macros, so the outer
functions are directly returning what the macros returned if they
are non-zero.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/788abcdca55886d1f43274c918eaa9f792a9f33b.1639619851.git.zhuyifei@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
CHV is currently straddling the divide by using parse_ddi_ports() stuff
for aux_ch/ddc_pin but going through all old codepaths for the rest
(intel_bios_is_port_present(), intel_bios_is_port_edp(),
intel_bios_is_port_dp_dual_mode()). Let's switch over full and use
i915->vbt.ports[] for the rest of the stuff.
dvo_port_to_port() doesn't know about DSI so we won't get into
any kind of "is port B HDMI or DSI or both?" conundrum, which
could otherwise happen on VLV/CHV due to DSI ports living in a
separate world from the other digital ports.
Including Jani's detailed analysis here for posterity:
"We stop checking for port A for CHV in intel_bios_is_port_present(), but
it's a warn and I don't recall any bug reports, so probably fine. We
could add a check in parse_ddi_port(), but meh.
Ditto for intel_bios_is_port_dp_dual_mode(), except it doesn't have a
warn.
The eDP check in intel_bios_is_port_edp() becomes slightly more
relaxed. Both the old and new check require these to be set:
- DEVICE_TYPE_DISPLAYPORT_OUTPUT
- DEVICE_TYPE_INTERNAL_CONNECTOR.
The old code also required these to be unset:
- DEVICE_TYPE_MIPI_OUTPUT
- DEVICE_TYPE_COMPOSITE_OUTPUT
- DEVICE_TYPE_DUAL_CHANNEL
- DEVICE_TYPE_LVDS_SIGNALING
- DEVICE_TYPE_TMDS_DVI_SIGNALING
- DEVICE_TYPE_VIDEO_SIGNALING
- DEVICE_TYPE_ANALOG_OUTPUT
It's possible we've added these just as a sanity check for broken VBTs
more than anything. I guess I'd see if actual problems arise.
Bottom line, I think the functional changes matter only for VBTs with
bogus data."
I agree that it should work assuming the VBT isn't totally insane.
Modern windows drivers also don't seem to check any of those
additional device type bits, which may or may not matter for older
devices (no idea what some old driver versions are checking).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217155403.31477-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
Yafang Shao
Andy Shevchenko
luo penghao
Geert Uytterhoeven
Qi Zheng
Hans de Goede
David Hildenbrand
Kefeng Wang
Steve French
kernel test robot
Palmer Dabbelt
Zhan Liu
Eric Huang
Jonathan Kim
Christian König
Stanley.Yang
mziya
yipechai
Xiaojian Du
Alexandre Ghiti
Brian Foster
Ville Syrjälä
Alexei Starovoitov
YiFei Zhu